"Dial up networking" is checked and "USB debugging" is checked, but can no longer connect in Diagnostic Mode...
I can verify that it worked before with this same phone with JB...I can't connect with BP tools mode
I messed around with drivers. But I can't figure out what to do and how do I turn it back on. Anyone have a solution to getting Diagnostic Mode back? on KitKat I am using Droid Razr.
Related
Does NOT show up in either fastboot or andriod 4.2.2 with debugging enabled, not in 'computer' or 'device manager'.
The only way I can get any confirmation it exists is in wug's nexus root toolkit if I put the phone in fastboot and do adv-list devices it will show the phones serial number and 'fastboot' as mode.
The phone itself seems to work fine except enabling/disabling debugging has no effect on it being recognized, thus the only option i'm able to do is 'flash stock + unroot' which went through fine, but again had no effect.
I've tried all drivers from gnex toolkit and wugs, 'device manager' will show adb drivers with no conflict, but still wont show the actual phone.
Done all steps many times, spent 14+ hours on this over 2 days, no clue what to do now. please help me
your drivers are the problem.
search for universal naked drivers.
Hi all,
I just got an i317M with Telus stock JB 4.1.2 firmware, and my PC installed the Samsung USB dirver v1.5.14.0.
When boot up the phone and connect to my PC, I can see the device and no problem to access all the folders.
But, once I put the phone into download mode, the ODIN v3.07 won't see anything connect, nor showed any error message.
The phone already has "USB debug mode" enabled, I'm wondering is that possible someone massed up the USB setting, and here is the detail setting showing on the phone:
Dialed *#7284# get into PhoneUtil, showed both UART and USB are choose "PDA", and the Qualcomm USB Settings is MPT+ADB.
If anyone saw similar situation before, please help me out of this issue.
Many thanks!
watchsat said:
Hi all,
I just got an i317M with Telus stock JB 4.1.2 firmware, and my PC installed the Samsung USB dirver v1.5.14.0.
When boot up the phone and connect to my PC, I can see the device and no problem to access all the folders.
But, once I put the phone into download mode, the ODIN v3.07 won't see anything connect, nor showed any error message.
The phone already has "USB debug mode" enabled, I'm wondering is that possible someone massed up the USB setting, and here is the detail setting showing on the phone:
Dialed *#7284# get into PhoneUtil, showed both UART and USB are choose "PDA", and the Qualcomm USB Settings is MPT+ADB.
If anyone saw similar situation before, please help me out of this issue.
Many thanks!
Click to expand...
Click to collapse
Was it in download mode when you plugged it in?
Sent from my GT-N7105 using xda premium
watchsat said:
Hi all,
I just got an i317M with Telus stock JB 4.1.2 firmware, and my PC installed the Samsung USB dirver v1.5.14.0.
When boot up the phone and connect to my PC, I can see the device and no problem to access all the folders.
But, once I put the phone into download mode, the ODIN v3.07 won't see anything connect, nor showed any error message.
The phone already has "USB debug mode" enabled, I'm wondering is that possible someone massed up the USB setting, and here is the detail setting showing on the phone:
Dialed *#7284# get into PhoneUtil, showed both UART and USB are choose "PDA", and the Qualcomm USB Settings is MPT+ADB.
If anyone saw similar situation before, please help me out of this issue.
Many thanks!
Click to expand...
Click to collapse
Did you install the Samsung USB drivers? That way your pc will see the gadget device and know what to do with it.
EDIT: Odin3 will only work with the Samsung USB drivers, without the USB drives odin3 will never connect to your phone in download mode.
Sent from my SGH-I317 using XDA Premium HD app
I think the settings are modem then pda.
Thanks all your support, finally got it works...
Looks like the i317M is very sensitive about the USB cable.. I was using the same micro-USB cable for S2/S3/Note1 with ODIN never has any issue, that's why I didn't think of the cable will cause this problem.
After swapped 3 different cables, finally the i317M connected to the ODIN with a brand new cable.
I have tried very hard to get USB Diag mode to work, but haven't managed to find a way.
Things I've tried:
echo 1 > /sys/devices/platform/lg_diag_cmd/diag_enable
Looking through the hidden menu for USB diag
Whatever I do, I don't get the diag device in Windows Device Manager, and can't connect with QPST and friends.
So if anyone knows a way, I'd be grateful! I want to enable Band 12 and AWS on my H815.
in the hidden menu (2776434#*#) scroll to bottom to Port Test check (very last thing on T-MO version), on the next screen touch to enable it. Plug it in and it should be enabled, thats I did it on my T-MO version
FWIW, it is "277634#*#" on my T-Mobile LG G4
I hope this video help you to enter qualcomm diag mode https://www.youtube.com/watch?v=DGCU9oDu43g, personally I had the wrong drivers installed, make sure you have usb tethering enabled, usb debugging and port enabled too!, If you are on an aosp may not work. You can found drivers in this video https://www.youtube.com/watch?v=Vh52x5_1FMg
I need help getting my phone into the correct mode to be recognized by Windows as a Diagnostic PORT, so the phone registers in QPST.
The phone works for ADB and storage in charging mode and MTP mode, respectively.
However, the phone is not detected at all when i choose RNDIS mode, which I understand is the necessary setting to configure a diagnostic port for QPST.
- I have also tried booting in BP TOOLS from fastboot, same results.
Motorola Device Manager is installed, phone is XT1676 3GB/16GB running LineageOS 14.1 with superuser, TWRP.
did uh find any solution bruh same problem is goin on with me !!!???
I bought this secondhand N4 910v. It has:
Android: 6.0.1
Baseband: N910VVRS2CQ82
Kernel version: 3.10.40
Build number: MMB29M.N910VVRS2CQ82
I have tried connecting this phone to several PCs but to no avail. Windows gives the error "Cannot recognize device...".
In Settings -> Dev Options -> "USB debugging" is checked. There is another option down the line Dev Options -> "USB configuration". It has options such as "Charging", "MTP", "PTP", "RNDIS", "Audio Source", "MIDI". When I try to change it from "Charging" to any other option, Windows gives the same "Cannot recognize device" error.
*#0808# does not work. In the ##366633# secret menu. I only have two options which read exactly this:
Enable DM Mode
Disable DM Mode (Set MTP Mode)
There is no ADB option.
I have tried connecting the phone while it's turned off, and in factory reset menu as well. Have also tried to connect after factory reset, but Windows gives the same error.
Not sure where to go from here... any help would be appreciated.