Hi, I bought my phone (LGE980) rooted with an older version of CyanogenMod installed. All the google apps were there, everything was running fine. A little less than a week ago I updated to 10.2, and the apps were gone. I have looked up instructions on this and have found none for this device.
I am a beginner at all this rooting stuff and would greatly appreciate it if somebody could help, as I don't want to go through the trouble of resetting to stock firmware and re-rooting and everything.
EDIT: Alright, I managed to figure this out on my own.
fezbot said:
Hi, I bought my phone (LGE980) rooted with an older version of CyanogenMod installed. All the google apps were there, everything was running fine. A little less than a week ago I updated to 10.2, and the apps were gone. I have looked up instructions on this and have found none for this device.
I am a beginner at all this rooting stuff and would greatly appreciate it if somebody could help, as I don't want to go through the trouble of resetting to stock firmware and re-rooting and everything.
EDIT: Alright, I managed to figure this out on my own.
Click to expand...
Click to collapse
To install the gapps just download them from the developer section in the cm 10.2. Thread and put them on your sd card boot into cwm and "install zip" and done
Flash gapp for CM 10.2:
http://goo.im/gapps
Related
Hello. I'm kinda new to this.
Today I tried (like some kind of noob) to install the Cyanogenmod 10.1 on my SGN2 without checking any tutorial and without know ANYTHING about ROMs and everything.
So now I'm stuck on the bootloop and don't know what to do.
To do this I just downloaded the Rom Manager app. I just downloaded the ROM and installed it. I did zero things before that.
I just want to get my phone back, doesnt matter if I lose all my data; I just want it working again.
I hope you can help me.
Miltxn said:
Hello. I'm kinda new to this.
Today I tried (like some kind of noob) to install the Cyanogenmod 10.1 on my SGN2 without checking any tutorial and without know ANYTHING about ROMs and everything.
So now I'm stuck on the bootloop and don't know what to do.
To do this I just downloaded the Rom Manager app. I just downloaded the ROM and installed it. I did zero things before that.
I just want to get my phone back, doesnt matter if I lose all my data; I just want it working again.
I hope you can help me.
Click to expand...
Click to collapse
I fixed it already. I just followed the instructions here http://droidviews.com/2012/how-to-recover-when-your-android-device-is-caught-in-bootloop/ (the Method 1, did all the steps).
I hope this helps anyone.
So I'm not a complete and utter n00b here, as I've been rooting and installing CM for at least three years now on several different phones. But this problem vexes me...
Patient: SIII, formerly rooted and running CM10.1 just fine. A few weeks ago, I tried to install a 10.2 stable build, and it somehow took my root away. I tried every trick I knew how - installing the root files via Odin (many versions), via ADB, via Kingo Root...nothing. Absolutely nothing I try will get this thing to give me my root back, and the ads are starting to really get on my nerves.
My ticker says 15 attempted installs, but I don't think it's blocking me from rooting...is it? All the phones I've rooted I've never had a problem like this, where absolutely nothing will allow root to "take", such as it is.
Any thoughts or suggestions?
Thanks!
Wow, nothing? I figured someone would at least sigh heavily, berate me for not reading the forums completely, then point me to a thread where this has been discussed ad nauseum
Last night, I tried rooting with TWRP, CWM, every variant and trick I could find to get this thing to root for me, and while these things all seem to load fine, none of them give me my root access back. No one has any ideas?
Thanks!
help
im using rooted 4.3 stock rom in t999..
everytime i boot into recovery it says "fixed root"
any solve for this?????
Did you dirty flash CM10.2 over CM10.1? if so, it might have failed to write the partition completely/correctly. I would suggest to backup everything that you can (adb backup or similar) and then wipe everything then reflash fresh CM10.2.0 + GApps + SuperSU or Koush's Superuser flashable zip.
Hey all,
I apologize if there is a thread for this already. I have the Sprint GS3 that I made the terrible, terrible mistake of upgrading to the stock 4.3 to give it a try and see if I like it.
After some scary moments trying to go back to the beloved CyanogenMod and bricking the device, I found I could install Cyanogenmod using their self-installer after restoring the phone to stock in Kies.
I'm running Cyanogenmod now, but there is an update available and when I try to let it update, it reboots into recovery, gives the sad broken android graphic, and reboots. I've not been able to install anything ROM related since.
Is Knox preventing the update, and is there a workaround to get the update to install without wiping the device back to stock?
emike09 said:
Hey all,
I apologize if there is a thread for this already. I have the Sprint GS3 that I made the terrible, terrible mistake of upgrading to the stock 4.3 to give it a try and see if I like it.
After some scary moments trying to go back to the beloved CyanogenMod and bricking the device, I found I could install Cyanogenmod using their self-installer after restoring the phone to stock in Kies.
I'm running Cyanogenmod now, but there is an update available and when I try to let it update, it reboots into recovery, gives the sad broken android graphic, and reboots. I've not been able to install anything ROM related since.
Is Knox preventing the update, and is there a workaround to get the update to install without wiping the device back to stock?
Click to expand...
Click to collapse
I will give you my two cents. First, rooting and installing custom ROM's should not be done using magical wonderful "one click" processes or apps that will do it for you. The Cyanogen Installer was a huge disservice to the rooted community in my opinion. Users need to get their hands dirty when rooting, so that they know how to work through problems forwards and backwards. That being said, I would highly recommend following this procedure to make sure your phone is rooted properly and running the correct recovery (Philz Touch, which is unbelievably awesome); my friend @goku2778 did a very nice job putting this tutorial together:
http://forum.xda-developers.com/showthread.php?t=2596697
After that, just download the ROM (or ROM's, I like to run various ones at any given time) from the proper sources, and flash them yourself.
I'm against one-click stuff myself. I've been rooting and running custom roms since my original Evo 4g.
If bricking my device after trying to roll back to a custom rom after Knox did it's business, and then recovering back isn't getting my hands dirty, then I don't know what is. I've spent plenty of time in adb. This issue though has me boggled. Why can the installer put a custom rom on when attempts to flash a custom rom (usually run nightlies) brick the device?
Thanks for the link, I'm taking a look into it now.
emike09 said:
I'm against one-click stuff myself. I've been rooting and running custom roms since my original Evo 4g.
If bricking my device after trying to roll back to a custom rom after Knox did it's business, and then recovering back isn't getting my hands dirty, then I don't know what is. I've spent plenty of time in adb. This issue though has me boggled. Why can the installer put a custom rom on when attempts to flash a custom rom (usually run nightlies) brick the device?
Thanks for the link, I'm taking a look into it now.
Click to expand...
Click to collapse
Didn't mean to imply that you weren't getting your hands dirty in general, just the way I word that rant every time I give it! My understanding is that there are compatibility issues between the CM installer and Knox, so yes, that is probably the basis of your problem. The combination of Philz Touch recovery and SuperSU that @goku2778 uses in his tutorial should solve your problems, it is the combination I have been recommending to VM and Boost users on Android Forums for a while now, with great success.
Mr. Struck said:
Didn't mean to imply that you weren't getting your hands dirty in general, just the way I word that rant every time I give it! My understanding is that there are compatibility issues between the CM installer and Knox, so yes, that is probably the basis of your problem. The combination of Philz Touch recovery and SuperSU that @goku2778 uses in his tutorial should solve your problems, it is the combination I have been recommending to VM and Boost users on Android Forums for a while now, with great success.
Click to expand...
Click to collapse
If memory serves there is a zip out there somewhere that flashes Knox apps away. Furthermore if it's a Boost or VM device you have to edit the updater script to make a Sprint ROM flash successfully.
Deucalion29710 said:
If memory serves there is a zip out there somewhere that flashes Knox apps away. Furthermore if it's a Boost or VM device you have to edit the updater script to make a Sprint ROM flash successfully.
Click to expand...
Click to collapse
The DeSamsungnizer zip is part of the tutorial by @goku2778, but keep in mind that this just takes care of the Knox apps, the actual bootloader is never ever going away unfortunately. And yes, for any users of VM or Boost who are reading this, there is extra work involved once the custom recovery has been installed and root has been successfully achieved.
Galaxy s3 on Virgin Mobile running cm11
I recently upgraded my s2 which was running cyanogenmod 11. I rooted and flashed everything myself with no difficulty. But after I switched that phone to an s3 I have had a ton of issues. My s3 was for Virgin Mobile (sgh-I747M) and nothing supported it. I was able to root and install clockworkmod with a little bit of difficulty. It wasn't until I tried installing cyanogenmod that it got really tough. Flashing would fail and at that point I didn't have an os so I thought I downloaded stock but was wrong when I hard bricked my phone. Anyways to the point. I ended up using the cyanogenmod installer which worked perfectly fine but now I can't update or download any nightlys. I'm not sure if it is because cyanogen had to install a custom kernel or not. When I go into system updates it says "your system is up to date. There is only one button that just checks for updates. Does anyone know how to fix this and allow me to install nightlys?
- Eric
Will CM installer work on S3-i9300(Int) version with 4.3 already installed?
Hi,
I am using the International version of SGS3- GT i9300. I dont know any of the process of rooting or installing a new version of android. But recently i have come across the cyangonmod installer app which i heard does all the work for us. I want to ask this doubt is that will the installation cause any problem if my S3 is already updated to 4.3 version? I am hearing people saying the KNOX might cause error. Should i wait for the CM 11 stable version or just give it a try ?
Thanks.
ericandbailey said:
I recently upgraded my s2 which was running cyanogenmod 11. I rooted and flashed everything myself with no difficulty. But after I switched that phone to an s3 I have had a ton of issues. My s3 was for Virgin Mobile (sgh-I747M) and nothing supported it. I was able to root and install clockworkmod with a little bit of difficulty. It wasn't until I tried installing cyanogenmod that it got really tough. Flashing would fail and at that point I didn't have an os so I thought I downloaded stock but was wrong when I hard bricked my phone. Anyways to the point. I ended up using the cyanogenmod installer which worked perfectly fine but now I can't update or download any nightlys. I'm not sure if it is because cyanogen had to install a custom kernel or not. When I go into system updates it says "your system is up to date. There is only one button that just checks for updates. Does anyone know how to fix this and allow me to install nightlys?
- Eric
Click to expand...
Click to collapse
did you figure out how to get nightly updates, from cyanogenmod installer ? I want to try the cyanogen installer to get cm 11 on my gs2 and gs3 (my specific devices are not on the cyanogenmod devices list, so i'm hesitant ) .. please respond .. anyone who can help ..
Guys I really need some help here
I have managed to get the new cwm on the ouya and then installed the bootloader with different options to enable installation of cm11, but it keeps going right to failsafe mode.
Am sure its this part I've done wrong:
......"if you are not using a custom rom you will need to relocate your bootimage (read: kernel) to /system/boot.img manually"..........
Can somebody PLEASE tell me how to do this bit
Have asked a few times (so sorry moderators) and nobody here has helped me
I know I'm not the only one with this issue.....
Please guys........
The cm nightlies should put everything in the right place. Certainly I didnt have to move anything post install. Installed cwm, installed cm11, installed google apps..Ouya boot quite happily. Im wondering if you have actually installed cm11?
I' m guessing you haven't installed cm11 yet. You're going to needto install it through the recovery menu. It will not install through the failsafe. Once installed you may also need to do a factory reset to get cm11 to boot properly. I'm running the April 11 nightly and it is awesome. Much better performance than my neo x7. Good luck, once you get it installed it works very well and is very stable.
Largewoodenspoon said:
Guys I really need some help here
I have managed to get the new cwm on the ouya and then installed the bootloader with different options to enable installation of cm11, but it keeps going right to failsafe mode.
Am sure its this part I've done wrong:
......"if you are not using a custom rom you will need to relocate your bootimage (read: kernel) to /system/boot.img manually"..........
Can somebody PLEASE tell me how to do this bit
Have asked a few times (so sorry moderators) and nobody here has helped me
I know I'm not the only one with this issue.....
Please guys........
Click to expand...
Click to collapse
If you have the newest CWM installed, if not then install the newest CWM, you can then sideload CM11 to your Ouya, as well as the latest GAPPS. I used sideload after I completely wiped the whole Ouya, then used CWM to sideload the Bootloader and then CM11 & GAPPS.
This might be a good way to go if you've already got knowledge of ADB, and can't get it working any other way.
I am very new at this, so I apologize in advance. I have the Virgin Mobile Galaxy S3 SPH-L710 running 4.3.
I simply wanted to root it so i could get rid of the bloatware and install Sixaxis and play emulators, but I didn't really know where to start, so I started looking around and found this
http://forum.xda-developers.com/showthread.php?t=2546505
So I basically did everything on there. I used Odin to install PhilZ Touch 6 Recovery (CWM 6.0.4.7) Did factory reset, wiped cache/dalvik. then installed the Odexed MK5 stock rooted zip, wifi fix zip, SuperSU update zip, and then the knox app remover zip.
Everything flashed just fine and it started right up. It had the Super Su app, but when I tried to install apps that need root permission it would say I don't have root access. I couldn't delete bloat apps and Super Su didn't show any apps and there isn't much I can do with it. So I guess it didn't work? Either way I wanted to try a different rom. Was gonna give Cyanogenmod a try. But every time I try to install it I get the little "Android bot laying on his back" thing and it says status 7. I tried to flash CM10, CM10.1, CM10.2, CM11. Nothing worked, same thing every time. Even tried different SD cards just in case of a mess up.
The phone itself works fine for now, calls and text work, wifi works. And it says there is an update, but when i hit accept, it reboots to recovery mode, does the "android fallen over" then boots back up.
Now here is my stupid part, I didn't backup the original cause the guide didn't say to. (Not blaming them, i should have know better) So I am assuming I have a messed up version of 4.3 and Cyanogenmod doesn't know what to do with me. I'm not sure. Here is where I am stumped and I have no idea where to go from here.
I posted this by accident in the wrong forum here
http://forum.xda-developers.com/galaxy-s3/help/tried-rooting-s3-didnt-help-t2879278
But someone decided to help me anyways (thank you so much). They said all i need to do is update my recovery. so I went here
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
And now I am running PhilZ 6.48.4, but I am still getting status 7 when I try to install CM11. I have tried CM10, CM10.1, CM10.2 and CM10.2.1 as well. I have been at this for days and i am going crazy because nothing I do seems to work. Does anyone have any idea what is wrong with my phone? Thank you so much in advance.
Mumonk said:
I am very new at this, so I apologize in advance. I have the Virgin Mobile Galaxy S3 SPH-L710 running 4.3.
I simply wanted to root it so i could get rid of the bloatware and install Sixaxis and play emulators, but I didn't really know where to start, so I started looking around and found this
http://forum.xda-developers.com/showthread.php?t=2546505
So I basically did everything on there. I used Odin to install PhilZ Touch 6 Recovery (CWM 6.0.4.7) Did factory reset, wiped cache/dalvik. then installed the Odexed MK5 stock rooted zip, wifi fix zip, SuperSU update zip, and then the knox app remover zip.
Everything flashed just fine and it started right up. It had the Super Su app, but when I tried to install apps that need root permission it would say I don't have root access. I couldn't delete bloat apps and Super Su didn't show any apps and there isn't much I can do with it. So I guess it didn't work? Either way I wanted to try a different rom. Was gonna give Cyanogenmod a try. But every time I try to install it I get the little "Android bot laying on his back" thing and it says status 7. I tried to flash CM10, CM10.1, CM10.2, CM11. Nothing worked, same thing every time. Even tried different SD cards just in case of a mess up.
The phone itself works fine for now, calls and text work, wifi works. And it says there is an update, but when i hit accept, it reboots to recovery mode, does the "android fallen over" then boots back up.
Now here is my stupid part, I didn't backup the original cause the guide didn't say to. (Not blaming them, i should have know better) So I am assuming I have a messed up version of 4.3 and Cyanogenmod doesn't know what to do with me. I'm not sure. Here is where I am stumped and I have no idea where to go from here.
I posted this by accident in the wrong forum here
http://forum.xda-developers.com/galaxy-s3/help/tried-rooting-s3-didnt-help-t2879278
But someone decided to help me anyways (thank you so much). They said all i need to do is update my recovery. so I went here
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
And now I am running PhilZ 6.48.4, but I am still getting status 7 when I try to install CM11. I have tried CM10, CM10.1, CM10.2 and CM10.2.1 as well. I have been at this for days and i am going crazy because nothing I do seems to work. Does anyone have any idea what is wrong with my phone? Thank you so much in advance.
Click to expand...
Click to collapse
only thing i can think of Is Odin the stock rom and start all over with trying to root......
I don't know how to explain it, but now everything is working perfectly....
I went back to the first site I posted about, Redownloaded everything, did the whole thing over, and root worked just fine. So I thought I would try my luck with CM11 and BOOM, working perfectly.
I have been tearing my hair out trying to get this to work for days and days and now, poof, it's all working. I dunno how, but I will take it. Thanks for the advice in both threads.
Mumonk said:
I don't know how to explain it, but now everything is working perfectly....
I went back to the first site I posted about, Redownloaded everything, did the whole thing over, and root worked just fine. So I thought I would try my luck with CM11 and BOOM, working perfectly.
I have been tearing my hair out trying to get this to work for days and days and now, poof, it's all working. I dunno how, but I will take it. Thanks for the advice in both threads.
Click to expand...
Click to collapse
Get towelroot, is an apk that root your phone with one click, after that just download your favorite super user from the market and done.