Related
ATT LG Optimus G Pro Here
I used newest FreeGee , Installed TWRP & Now im stuck in recovery mode. I flashed gummy rom first time & It worked. Ran into problem after I installed the Google apps so I did a factory reset, wiped everything to try again to install gummy rom. Now I'm stuck in TWRP. I also used ADB sideload commands to push the rom to phone & It did push it, except now. When I try to install the rom, It keeps saying FAILED. Can someone tell me what im doing wrong?
newgeek- I don't know if the AT&T version of this is very different to my F240 version but I am familiar with that 3rd screen you posted with the "secure booting error" or something like that.
What about just pulling that battery out and doing factory reset and start over from the beginning ?
LL13-
newgeek35 said:
ATT LG Optimus G Pro Here
I used newest FreeGee , Installed TWRP & Now im stuck in recovery mode. I flashed gummy rom first time & It worked. Ran into problem after I installed the Google apps so I did a factory reset, wiped everything to try again to install gummy rom. Now I'm stuck in TWRP. I also used ADB sideload commands to push the rom to phone & It did push it, except now. When I try to install the rom, It keeps saying FAILED. Can someone tell me what im doing wrong?
Click to expand...
Click to collapse
Try to push another ROM via adb, I read in the general Section that there were some Gummy files that weren't the right size, just download CM11 and try to flash it, TWRP is saying that the flash failed, that's why you are stuck in recovery.
Erik
The phone currently has no OS , I also tried to mount my 64gb sd card to install off of that & It gives me a mounting error for SD CARD. I have tried several other roms & No luck , Keeps giving me FAILED. Is this because of the secure boot perhaps? I'm totally clueless why it's not taking it. I'm running my nexus 4 with the gummy rom without a hitch.
Why not try a different SD card ? If that SD card was in the phone when all this happened maybe something is on the card that's bad ?
LL13-
I borrowed a 2GB SD CARD & It mounts but same thing as before FAILED. Tried both gummy & CM 10.2
newgeek35 said:
I borrowed a 2GB SD CARD & It mounts but same thing as before FAILED. Tried both gummy & CM 10.2
Click to expand...
Click to collapse
It looks like an error with the updater script, maybe something twrp isnt reading or executing? try a different rom.
At worst try a different Recovery.
ADDED:2/4/2014: I would avoid twrp on freegee, i've heard others have issues and it may have something to do with your situation.
Also, I noticed your twrp says 2.6.1.0, am I mistaken or is the newest teamwin 2.6.3.1? That number don't look right.
If possible try to flash madmacks twrp or cwm 6.0.4.6.
1.Try to Flash a ROM via sideload
2. you can end the recovery boot loop by using adb commands, there are two methods try them
http://forum.xda-developers.com/showpost.php?p=49370751&postcount=70
and
http://forum.xda-developers.com/showpost.php?p=48136185&postcount=268
I had the same issue seems like the are some problems with TWRP on this particular phone I flashed the regular clockworkmod and it works perfect.I tried on another phone with same results.
Right now
Flash stock rom
root
use freegee to install regular cwm I tried rom manage but recovery did not installed
the flash another rom if thats what you really want but copy rom directly to sd card instead
Its not just twrp apparently the new update of freegee installs the wrong bootloader/image on our phone. It bootloops anyone that uses it.
Sent from my LG-E980 using XDA Premium 4 mobile app
Use Madmack's hacked TWRP located in his CM threads. Best recovery for our device from what I've seen/tested.
Sent from my AICP 4.4 LG-E980
Neroga said:
Use Madmack's hacked TWRP located in his CM threads. Best recovery for our device from what I've seen/tested.
Sent from my AICP 4.4 LG-E980
Click to expand...
Click to collapse
Madmack's TWRP is reliable when you want to have no bootloops into your recovery. But i have the problem, that i cannot flash any other roms and it shows, that my LG E986 isnt recognized as a suitable device for the rom and it aborts the procedure. Although on the other recoveries it worked fine...
Is there something what i have to do except switching recoveries to my phone's death?
I used ADB to push the stock rom back to device & It took it's sweet time but it worked. I sold the phone to a friend of mine LOL! They wont know the difference.
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
Have you tried going back to freegee and installing cmw there?
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Yes guys. Thank you for the help.
Tried freegee and I got CWM to work finally pheww.
Now I have backup and just installed CM11 nightly
Thank you so much
Sent from my LG-E980 using xda app-developers app
shayneflashindaily said:
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Click to expand...
Click to collapse
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
DraghanC said:
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
Click to expand...
Click to collapse
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
mshenoy4573 said:
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
Click to expand...
Click to collapse
There are two different versions of Freegee on the Playstore. One is the free version and One is the paid version. I used the free version and when I open the app to install CWM recovery I don't see the "unlock" option, so I think the "unlock" option is only available in the paid version. Also, when I used the free version of Freegee to install CWM recovery, I can make and restore my nandroid backup. Maybe I need to buy the paid version of Freegee??
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
mshenoy4573 said:
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
Click to expand...
Click to collapse
I already tried 3 different roms and they all turned out the same. Keep rebooting after 10 - 15 seconds. I might have to give twarp a try. thanks
Just wondering, what software version is your phone?
Sent from my LG-E980 using XDA Premium 4 mobile app
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
okay I will try that and see if it works.
ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
do I enable Loki after the flash or before the flash? Because I enable loki in the advance option of CWM recovery after I flash a custom rom and the phone still reboots 10-15 seconds. I did all the normal wipes and stuff too. I'm thinking maybe its because of I'm the software version that I'm on which is E98010g.
He said "check before you flash any rom,that LOKI support is enabled"... You should carefully read instructions before you do anything or you will end with bricked device...
Sent from Tapatalk
mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
i did this as well and somehow now i can only get into twrp however i cant flash anything...any direction on this? i cant find the file i need to put on the sd card and flash thru twrp...any help?
For some reason Rom manager cwm didn't work for me so I tried installing freegee from the play store and installing cwm from there.
Since freegee my cwm works fine and I was able to flash.
Have you given freegee a try ?
Sent from my LG-E980 using xda app-developers app
I'm having the same trouble with recovery. I was on SlimBean for several months and decided to flash a ROM from RadeonMaya, but it wouldn't boot, so I tried to restore my backup of Slim from CWM. It looked like it restored properly, but it wouldn't boot either. I finally reverted back to stock and rooted again, downloaded Freegee and tried to flash CWM. I booted into recovery to flash my Slim backup, but I got an "error loki-ifying the boot image". I tried Phil's recovery, but couldn't boot back into recovery from CWM
Since then, I have not been able to flash anything, and have reverted back to stock probably a dozen times. I've tried TWRP, but can't flash a version that works on 4.1.2. I'm beyond frustrated at this point. I had fun flashing on this phone until these problems showed up, now I'm just going to try to like the stock ROM and hope we get an update to KitKat.
Just a quick question guys. What does freegee's "unlock" feature do? I ask because I don't get that option in Freegee either. Is it supposed to network unlock your phone or? Also, what is the need for the unlock?
Hi guys, much thanks for your help.
I had the unofficial CM11 nightly installed on my GTab 3 8.0 but it got corrupted. I used PhilZ Touch to wipe the storage but I can't find a guide to help me re-install CM on this device.
I tried to use Odin to install CM11, but it won't take .zip files. I converted the file to .tar so I could try and flash it, but Odin immediately crashed.
Please help me fix this device.
To add - There is no ROM installed on this device. It has only the philz touch recovery installed.
I can't turn the tablet off - The device just constantly displays the battery icon. When I try to turn it on, it boots and endlessly displays the galaxy tab 3 boot splash screen.
Hoodahottie said:
To add - There is no ROM installed on this device. It has only the philz touch recovery installed.
I can't turn the tablet off - The device just constantly displays the battery icon. When I try to turn it on, it boots and endlessly displays the galaxy tab 3 boot splash screen.
Click to expand...
Click to collapse
I'm not familiar with philz, I'm using TWRP, but I used TWRP to install CM11. I'm assuming philz is similar.
lloydsw said:
I'm not familiar with philz, I'm using TWRP, but I used TWRP to install CM11. I'm assuming philz is similar.
Click to expand...
Click to collapse
Yes lloydsw, PhilZ is ClockWorkMod based. PhilZ has similar functionality to TWRP.
My problem is that I don't know how to get the ROM zip file onto the tablet. If I can get it on the tablet, I'll have no trouble installing with PhilZ.
I tried to adb a little bit, but I keep getting Access is denied errors. For some reason, I have been getting these errors recently whenever the Console is involved, even if I launch it with admin rights. I think Microsoft changed Console functionality with a recent update. So, I didn't try too hard.
So, how do I get this rom file into the tablet?
Hoodahottie said:
Yes lloydsw, PhilZ is ClockWorkMod based. PhilZ has similar functionality to TWRP.
My problem is that I don't know how to get the ROM zip file onto the tablet. If I can get it on the tablet, I'll have no trouble installing with PhilZ.
I tried to adb a little bit, but I keep getting Access is denied errors. For some reason, I have been getting these errors recently whenever the Console is involved, even if I launch it with admin rights. I think Microsoft changed Console functionality with a recent update. So, I didn't try too hard.
So, how do I get this rom file into the tablet?
Click to expand...
Click to collapse
Put the zip on an external sdcard and use that.
Sent from my SM-N900V using Tapatalk
gr8nole said:
Put the zip on an external sdcard and use that.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Hi gr8nole,
I don't think I have an microSD. I have an old SD card but I don't think the Tab 3 will take that.
Is there some kind of GUI tool, like the nexus root toolkit that let me flash .zip files on this thing? I don't why odin doesn't take the most common kind of compressed file. I'm kind of stuck here.
Hoodahottie said:
Hi gr8nole,
I don't think I have an microSD. I have an old SD card but I don't think the Tab 3 will take that.
Click to expand...
Click to collapse
You have a couple options.
Download the full firmware from sammobile.com and flash it with odin. Then re-flash custom recovery.
Or, continue trying to get the rom zip onto your device. Either get a micro sdcard or get adb to work.
If you get adb working, remember you have to mount the data partition before you can send anything to the internal sdcard (internal sdcard is simply a link to /data/media).
Sent from my SM-N900V using Tapatalk
Hey everybody.
I searched my house for microSD cards, and I found one in an old dumb phone. And I recovered some pictures and info that I thought was lost. I found sd card adapters in another box. I put them together and installed the rom easily.
My tablet is working fine, thanks to everyone. Not only is my device working again, I found my lost data. yes!
gr8nole, special thanks to you. Have a great day!
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Did you follow the instructions to flash TWRP using Odin?
olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear
bump
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?
N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.
N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post
aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.
So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life