2 days ago i flash cm11 on my c1904. everything works fine, but today while device connected to the pc i accidently untick the MTP option on my device. now pc not recognice my device and not even charging.
any solution?
yogesh448 said:
2 days ago i flash cm11 on my c1904. everything works fine, but today while device connected to the pc i accidently untick the MTP option on my device. now pc not recognice my device and not even charging.
any solution?
Click to expand...
Click to collapse
try updating your drivers on your pc
Related
Greetings!
Past couple of weeks when trying to connect my Arc to the PC it will not pick it up. It charges OK with the green light showing on the side but absolutely no indication from PC or laptop that a phone is connected.. I have 3 different cables and another laptop - having tried all the cables on both machines - still no joy.
No notification in the pull down - nada!
Reinstalled Win7 and factory reset phone half a dozen times - still nothing!
Running Win7 64bit but have never had issues with OS previously up until a few weeks ago!
Service provider was as useful as an ashtray on a motorbike!
Anyone know a solution?
Thanks
install PC companion and SE Update Service, enable usb debugg mode on phone, look at your ubs connection settings on phone too
TheHaso said:
install PC companion and SE Update Service, enable usb debugg mode on phone, look at your ubs connection settings on phone too
Click to expand...
Click to collapse
Thanks for the reply TheHaso. Should have mentioned I have tried with Companion installed and not installed, updater installed and not installed. With debug on & off, MTP on & off, MSC on & off, storage mounted/unmounted.
Really strange to be honest!
check your 'Device Manager' on your desktop,, it will show you if any hardware connected and not working propely.
right click and try update driver if show caution on portable devices.
Sent from my LT18i using Tapatalk
Also tried this for a solution buddy.. Thought it was a USB driver had slipped off or something.
Truly baffled! If it's charging fine then why would pc companion not detect it :-S
Sent from my LT15i using Tapatalk
I'm sure you must have already done that but may be try updating with a different driver and see if it could solve problem. I know because it also happened to me.
Tarzan- said:
I'm sure you must have already done that but may be try updating with a different driver and see if it could solve problem. I know because it also happened to me.
Click to expand...
Click to collapse
Greetings, which other driver would you be referring to? I have literally tried everything but still no detection from PC in MTP or MSC.
x10Mike said:
Greetings, which other driver would you be referring to? I have literally tried everything but still no detection from PC in MTP or MSC.
Click to expand...
Click to collapse
Uninstall the driver from device manager, then restart the pc and connect to another usb port
From my sexy LT15i
This will work...
I have almost the same problem on my ARC.
Download MyPhoneExplorer on your PC and install it.
Download MyPhoneExplorer Client from the market and install it on your phone.
Turn on USB debugging and connect your phone with your PC.
This works on my arc and i guess it will work on you phone as well..
Kajendran said:
I have almost the same problem on my ARC.
Download MyPhoneExplorer on your PC and install it.
Download MyPhoneExplorer Client from the market and intall it on your phone.
Turn on USB debugging and connect your phone with your PC.
This works on my arc and i guess it will work on you phone as well..
Click to expand...
Click to collapse
Many thanks for the advice. Still not working and decided the final option of giving it to T-Mobile for repair.
Cheers for the reply guys.
HI:
I have my friend phone and it's Xperia S , i just want to root it but the problem is all rootkits can't detect my phone , just still on "wait for device".
Flashtool can detect it fine and the Sony PC Companion can.
I am trying to root using DooMLoRD Toolkit v18.
1) Are the Drivers installed?
a.Is USB debugging on?
2) Turn on Unknown Sources because it doesn't hurt to
3) Check the Cable
4) Try another computer
424aca said:
1) Are the Drivers installed?
a.Is USB debugging on?
2) Turn on Unknown Sources because it doesn't hurt to
3) Check the Cable
4) Try another computer
Click to expand...
Click to collapse
1) I installed it from flashtool , is there another drivers i have to install?
2) It's already on.
3) Cable work fine because Flashtool detect the phone.
4) I did on my brother PC with Windows 8 and i have 8.1.
Guys please i need a fast help , i have to get my friend phone back soon.
I just noticed something , that when i connect my phone Flashtool say "device connected with USB Debigging off" but i tried to turn it on and off 5 times but still the same world!
I think there is some drivers problem.
I just had knew the problem , it's the drivers!
I just followed a method about how to install drivers on windows 8.1 and worked fine , but i think that there is still problem with drivers.
Make sure you are only using usb2 ports and not usb3 when connecting your phone
Sent from my Kindle Fire HD running CM 10.1
conalt said:
Make sure you are only using usb2 ports and not usb3 when connecting your phone
Sent from my Kindle Fire HD running CM 10.1
Click to expand...
Click to collapse
I had tried both , but the problem is from the drivers on my Windows 8.1 and i don't know how to fix it.
Hello gentlemen,
i got the tablet for three days and all was fine.
Yesterday i installed unofficial CM 10.2 build and since then when i connect tablet to PC,
my tablet is detected as Nexus 7 with exclamation or as deb also with exclamation,
I tried to install nexus 7 usb driver, but it didnt find any device to which it could install the driver.
USB Debugging is enabled, if i disable it, nothing is detected.
What are my options now? can it be solved?
Everything else is fine.
spajdr said:
Hello gentlemen,
i got the tablet for three days and all was fine.
Yesterday i installed unofficial CM 10.2 build and since then when i connect tablet to PC,
my tablet is detected as Nexus 7 with exclamation or as deb also with exclamation,
I tried to install nexus 7 usb driver, but it didnt find any device to which it could install the driver.
USB Debugging is enabled, if i disable it, nothing is detected.
What are my options now? can it be solved?
Everything else is fine.
Click to expand...
Click to collapse
Can you view it from the pc, see the files on it and whatnot?
RiffyDivine said:
Can you view it from the pc, see the files on it and whatnot?
Click to expand...
Click to collapse
Only via enabling MTP or PTP, i'm screwed?
spajdr said:
Hello gentlemen,
i got the tablet for three days and all was fine.
Yesterday i installed unofficial CM 10.2 build and since then when i connect tablet to PC,
my tablet is detected as Nexus 7 with exclamation or as deb also with exclamation,
I tried to install nexus 7 usb driver, but it didnt find any device to which it could install the driver.
USB Debugging is enabled, if i disable it, nothing is detected.
What are my options now? can it be solved?
Everything else is fine.
Click to expand...
Click to collapse
spajdr said:
Only via enabling MTP or PTP, i'm screwed?
Click to expand...
Click to collapse
No you aren't screwed, you really got to want it to break it. Just so I am clear then it won't show up as an external hard drive or anything unless you do a peer to peer setup? Also are you running the newest nightly of CM?
"I had to turn off USB debugging, delete the ADB drivers in Device Manager, then reboot the device while it’s still plugged in. Windows recognized the device as an MTP device & installed the drivers before it even fully booted."
Found this well reading on it not connecting to the pc. Simple enough to try out.
Yes sir, I can only see it as PTP or MTP, nothing else.
Should MTP be enabled when rebooting the device?
What i should achieve by doing this?
EDIT.: after restart of device it's trying to install AOSP on deb, unsuccessfully.
spajdr said:
Should MTP be enabled when rebooting the device?
What i should achieve by doing this?
EDIT.: after restart of device it's trying to install AOSP on deb, unsuccessfully.
Click to expand...
Click to collapse
i thought that MTP is the only option to connect it to the pc because its sdcard is emulated on the same partition? my galaxy nexus and nexus 7 can only do MTP too, unless in recovery where i mount it somewhere along the lines of mount as usb storage?
NigPod said:
i thought that MTP is the only option to connect it to the pc because its sdcard is emulated on the same partition? my galaxy nexus and nexus 7 can only do MTP too, unless in recovery where i mount it somewhere along the lines of mount as usb storage?
Click to expand...
Click to collapse
You could be right, i don't know, i copied custom rom immediately after i got nexus, so i didn't really watched how PC see the tablet.
Anyway i successfully flashed back original firmware 4.3.1 and after reboot suddenly Nexus 7 is recognized correctly
and it automatically install driver from folder where i got usb driver from google. So .. i will take a few days pause before i flash custom rom again
Thank you all for helping me in this.
Cheers
spajdr
Hello,
big problem here.
My 5X just stopped showing up on my PC. It used to work fine before, but then stopped a few days ago.
I thought it might be related to the Encryption, so I just wiped everything (internal storage). But still the same problem and now I dont even have an OS installed. It's not even recognized in fastboot mode.
I ordered an USB OTG Adapter now. Hopefully I can push files with an USB stick to the phone then.
Any suggestions how I can make my Windows 10 recognizing the phone again? I also tried different Windows 10 PCs. Its not even showing up in device manager, no sound at all when I plug it in, its just charging...
Keksdroid said:
Hello,
big problem here.
My 5X just stopped showing up on my PC. It used to work fine before, but then stopped a few days ago.
I thought it might be related to the Encryption, so I just wiped everything (internal storage). But still the same problem and now I dont even have an OS installed. It's not even recognized in fastboot mode.
I ordered an USB OTG Adapter now. Hopefully I can push files with an USB stick to the phone then.
Any suggestions how I can make my Windows 10 recognizing the phone again? I also tried different Windows 10 PCs. Its not even showing up in device manager, no sound at all when I plug it in, its just charging...
Click to expand...
Click to collapse
I have a similar problem. My phone shows up in device manager, but I cant access the phone at all and in device manager it says no drivers are installed. Can't seem to install them again. Are you in the beta program and running 7.1.2?
SYRE123 said:
I have a similar problem. My phone shows up in device manager, but I cant access the phone at all and in device manager it says no drivers are installed. Can't seem to install them again. Are you in the beta program and running 7.1.2?
Click to expand...
Click to collapse
Nope, I was running Resurrection Remix N 7.1.1
So I managed to push a ROM to my phone via USB OTG.
I tried 2 different ROMs, all stuck on bootloop. Any idea?
It still doesnt get recognized from my pc.
go to C:\Windows\INF there search for wpdmtp.inf than right click on that file than on install. make sure your phone is connected while performing these steps.P.S C is my drive where windows is installed. idk will that help you or not but at least try and see.
gmp009 said:
go to C:\Windows\INF there search for wpdmtp.inf than right click on that file than on install. make sure your phone is connected while performing these steps.P.S C is my drive where windows is installed. idk will that help you or not but at least try and see.
Click to expand...
Click to collapse
Nope, didnt help But thanks anyway!
Suddenly my pc doesn't detect my phone when I connect it by USB. Before it was fine. Also I noticed a failed update and the developer options off (which I turned on again doing that "pressing 7 times the build number thing") Could someone help me? Also I have my phone rooted with Magisk.
Evedammo said:
Suddenly my pc doesn't detect my phone when I connect it by USB. Before it was fine. Also I noticed a failed update and the developer options off (which I turned on again doing that "pressing 7 times the build number thing") Could someone help me? Also I have my phone rooted with Magisk.
Click to expand...
Click to collapse
Have you tried a different usb port? usb cable? another device? I've got mine rooted since april and it's been working fine.
I tried on other one and it worked. The problem now is I can't see a folder in the external SD Card, I can see it on PC but not all the files in it and I can't erase files from that folder in Root Explorer.