[Q] Can't extract tot - LG Optimus G Pro

I tried to extract tot file.(itis lg flash tool tot)
It was impossible to extract it into partitions.
I tried lgunpack tool but doesn't work....
Is there any other ways to do this.
My device is f240L
I want to make qpst file to unbrick hard brick.
But it was impossible for me to find any other ways to get
partiton files(mbn)
Is there any other ways to get mbn files?

Related

[Help] Can't extract files from KDZ to debrick

Hello guys, i got an LG G Pro Lite D681 that i failed to flash with LG Flash Tool 2014, and now the phone is dead and doesn't even vibrate or react if i press any key, BUT if i plug it in to the computer, the Device Manager recognizes it as MTK USB Port (COM3).
I don't think the device is completely dead, right? but i can't enter download mode so i can't use LG Flash Tool again.
1st: I have two firmwares:
LG_D681_V10A_00 and LG_D681_V20A_00
I've been trying to get the content of both in order to try to flash the images with SP Flash Tool v5.1524.00.000. The only tool that accepts the .kdz is LGExtract 0.2.1 by navossoc, all i get is:
LGD681AT-00-V20a-AMX-XXX-NOV-18-2014+0.bin
LGUP_MT6577.dll
Then i tried to extract LGD681AT-00-V20a-AMX-XXX-NOV-18-2014+0.bin with BinExtractor but i get this error:
Code:
Reading AP Header...
Failed Reading APHeader!
Reading GPT Header...
Does not contain GPT at first data block
Writing Files...
Finished
What am i doing wrong? What should i try to get the partitions and files needed to debrick? I've read a couple of tutorials but i can't do anything at this point
Thanks a lot in advance! :fingers-crossed:

V495 LGUp LG Flash Tool not working

I am trying to flash the TOT and DLL files from https://forum.xda-developers.com/lg-g-pad-83/general/fix-v495-using-uk495-kdz-t3420711.
With LGUp, it sees my device and sees the com port, but it says unknown model and it cannot connect to it
With LGFlashTool, I get an error that says "Failed previous load()" when I try to perform the upload to the device. (The device is in download mode and I've moved the megalock file and selected the appropriate DLL and TOT file).
I have followed the instructions in several "how to flash TOT" threads and tried different versions of LGUp and LGFlashTool with the same results.
I am currently on 5.0.2 stock rooted and using a Windows 10 computer. My goal is to get completely stock with no evidence of root to be able to use apps that will not work on rooted devices. I have been unsuccessful in all attempts to hide root.
Has anyone else seen the same problems and did you solve them? Any suggestions would be greatly appreciated.

Extracting KDZ files?

How do I extract a kdz file? When I unlocked my bootloader I forgot to backup my system and now I wanted to mess with the default boot.img but it's trapped in a kdz file that I found online. Usual methods for extracting kdz file failed and also LGUP gives me an error that it doesn't support my phone. Does anyone have any way of extracting one or at least system + image file of "710em" model (preferably 10f but anything will do).
you do not need to extract it you can use the kdz with LGUP directly if you want to recover the phone
https://37s2gw.db.files.1drv.com/y4...S9mPl9F70w?width=677&height=464&cropmode=none

ROM Lg g8 thinq Extracting

Hello everyone, I'm new on the forum. Sorry to bother you, I've been reading most of the threads about the G8 thinq. My problem is that I can't extract LG's kdz firmware properly. I already tried with the Lg extract, with the CMD, with Power Shill. None manage to extract the '.DZ' Please share me a rom that is already extracted, thanks in advance.
CloudStrife97 said:
Hello everyone, I'm new on the forum. Sorry to bother you, I've been reading most of the threads about the G8 thinq. My problem is that I can't extract LG's kdz firmware properly. I already tried with the Lg extract, with the CMD, with Power Shill. None manage to extract the '.DZ' Please share me a rom that is already extracted, thanks in advance.
Click to expand...
Click to collapse
So a couple of things, the kdz extractor tools are plentiful, some work under windows and some under linux. I've used the linux version and it does work, no issues. The DZ file is basically the KDZ uncompressed. It's a large single file.
The DZ is then further broken down by the utility into various forms due to the command you use, you can get partition images and chunks of images etc etc.
2nd, you ask for a 'rom that is already extracted'? That's a lot of images, about 5 gig worth, what **exactly** are you trying to do? Maybe you only need a few files? Maybe you need files from a specific rom version? Maybe you need a kdz rom that doesn't even exist? Like at&t and sprint?
you might want to fill in some details for anyone to help.
AsItLies said:
So a couple of things, the kdz extractor tools are plentiful, some work under windows and some under linux. I've used the linux version and it does work, no issues. The DZ file is basically the KDZ uncompressed. It's a large single file.
The DZ is then further broken down by the utility into various forms due to the command you use, you can get partition images and chunks of images etc etc.
2nd, you ask for a 'rom that is already extracted'? That's a lot of images, about 5 gig worth, what **exactly** are you trying to do? Maybe you only need a few files? Maybe you need files from a specific rom version? Maybe you need a kdz rom that doesn't even exist? Like at&t and sprint?
you might want to fill in some details for anyone to help.
Click to expand...
Click to collapse
Hello, thanks for answering. I will begin to tell my story. I have an Lg G8 ThinQ Sprint with Android 10. It is network unlocked because I can use it here in Honduras. I did the Crossflash tutorial ( https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/ )
While using the QFIL I deleted flash from one of the 7 partitions the tutorial says. My phone no longer exits EDL mode ( Qualcomm HS-USB QDloader 9008 (COM5)) So I went to this tutorial: (https://forum.xda-developers.com/t/lg-g8-stuck-in-qualcomm-hs-usm-qdloader-9008.4050197/).
I followed the steps to load the ¨Lun¨, I did it in PowerShell, because in CMD it didn't work for me. Apparently the ¨Lun¨ were installed well. Now the problem is that I can't install the necessary partitions, because I can't unzip the .DZ ROM
Help, what do I do? My cell phone is only in Qualcomm HS-USB QDloader 9008 mode, it does not go to download mode
CloudStrife97 said:
Hello, thanks for answering. I will begin to tell my story. I have an Lg G8 ThinQ Sprint with Android 10. It is network unlocked because I can use it here in Honduras. I did the Crossflash tutorial ( https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/ )
While using the QFIL I deleted flash from one of the 7 partitions the tutorial says. My phone no longer exits EDL mode ( Qualcomm HS-USB QDloader 9008 (COM5)) So I went to this tutorial: (https://forum.xda-developers.com/t/lg-g8-stuck-in-qualcomm-hs-usm-qdloader-9008.4050197/).
I followed the steps to load the ¨Lun¨, I did it in PowerShell, because in CMD it didn't work for me. Apparently the ¨Lun¨ were installed well. Now the problem is that I can't install the necessary partitions, because I can't unzip the .DZ ROM
Help, what do I do? My cell phone is only in Qualcomm HS-USB QDloader 9008 mode, it does not go to download mode
Click to expand...
Click to collapse
So honestly I'm confused by where you are or what the situation is. But no matter.
This link is for the Lun4 partitions of sprint a10 backup. It has the rawprogram xml needed to flash it.
My understanding is that should be all you need to get LGUP to work. So flash that with qfil and then go directly to LGUP with the key combo.
Then, in lgup, do whatever you want, crossflash etc. Once you reinstall a kdz with lgup you should be back to the beginning and can start again.
good luck
AsItLies said:
So honestly I'm confused by where you are or what the situation is. But no matter.
This link is for the Lun4 partitions of sprint a10 backup. It has the rawprogram xml needed to flash it.
My understanding is that should be all you need to get LGUP to work. So flash that with qfil and then go directly to LGUP with the key combo.
Then, in lgup, do whatever you want, crossflash etc. Once you reinstall a kdz with lgup you should be back to the beginning and can start again.
good luck
Click to expand...
Click to collapse
Thanks for the files and information. I just did the flash in QFIL. look what it tells me.
What could be wrong with my cell phone? It no longer wants to enter power on or enter download mode.
The screenshots from 1 to 5 are those of the QFIL flash process.
Then see how is the partition manager. From screenshot 6 to 13.
Do you find any problem?
I still can access Download mode.
Thank you again for your dedication and availability to help me
Hmmm, wasn't sure if that would work or not. That rawprogram xml was created with bkerler edl utilities, I know it can be used to restore with those utilities but thought it would work with qfil, guess not.
seems your only other option would be to flash ea partition manually with qfil.
AsItLies said:
Hmmm, wasn't sure if that would work or not. That rawprogram xml was created with bkerler edl utilities, I know it can be used to restore with those utilities but thought it would work with qfil, guess not.
seems your only other option would be to flash ea partition manually with qfil.
Click to expand...
Click to collapse
ok i'll try it that way.
how can i use bkerler edl utilities to load the rawprogram xml ?
Hi, I also tried this tutorial:https://forum.xda-developers.com/t/tutorial-rescue-from-hard-brick.4351389/.
According to him, since my device is Sprint, I have to flash all partitions. You can successfully do part C. But I haven't been able to do part E yet because I don't have all those partitions.
AsItLies​share me the full firmware backup so I can restore mine, please
CloudStrife97 said:
AsItLies​share me the full firmware backup so I can restore mine, please
Click to expand...
Click to collapse
I don't have the full backup, sorry. Pretty sure if you look though someone has posted a link to it.
Keep in mind though, if you have chip erased your device, restoring a backup will not restore your imei, for that it will cost $ to pay someone with an octoplus box to do it.
AsItLies said:
So honestly I'm confused by where you are or what the situation is. But no matter.
This link is for the Lun4 partitions of sprint a10 backup. It has the rawprogram xml needed to flash it.
My understanding is that should be all you need to get LGUP to work. So flash that with qfil and then go directly to LGUP with the key combo.
Then, in lgup, do whatever you want, crossflash etc. Once you reinstall a kdz with lgup you should be back to the beginning and can start again.
good luck
Click to expand...
Click to collapse
Do you have an AT&T one?
PHANX0M said:
Do you have an AT&T one?
Click to expand...
Click to collapse
no
My device stuck in edl mode it's nothing show no download mode no restart no turn off only edl mode please help

Question Help with getting qualcomm flash files

So I was trying to roll bcak my device and it got bricked to the point wher it's only detected by Qualcomm HS-USB QDLoader 9008 and it wont boot into fastboot/recovery/sys/bootloader.
I understand how I can flash the firmware with QFIL but QPST won't recognize my device as a phone even when the port was defined by me and by proxy I cannot get my hands on the .mbn or .elf file needed.
So I'm looking for help either getting the files themselves or a way to make QPST recognize my device so I can grab them myself.
Did you extracted the ofp file? Use mct oft extractor tool
I've got the files now but I cannot seem to flash it since the super.img broken up into 5 images and I'll have to edit the rawprogram0.xml and-or the patch0.xml

Categories

Resources