Xda E-Mail Links taking me elsewhere. - About xda-developers.com

So I usually get emails to topics Ive been subscribed too or quoted blah blah, Well I was lazy this morning did not feel like pulling out the phone So I went to my email and had 2 topic / quote replies on the SAME thread. Well click one min take me to a thread back from 2010 and in which I have not posted in. Next mine the SAME link takes me to the actual thread while the other email link will say the post is invalid. Whats Causing this? Its not my computer or ISP as it does it on another device now that I check.
These are both the links
http://forum.xda-developers.com/showthread.php?p=49261794#post49261794 - As of right now its taking me where it should 10:22AM EST
http://forum.xda-developers.com/showthread.php?p=49261814#post49261814 - This one is supposed to be for the SAME thread but it says Invalid now as of 10:22AM EST
EDIT: 10:44 AM EST now taking me to some Sim unlock thread...
Also I refeshed this thread to check if anyone responded and it took me to a different thread just by refeshing

hyelton said:
So I usually get emails to topics Ive been subscribed too or quoted blah blah, Well I was lazy this morning did not feel like pulling out the phone So I went to my email and had 2 topic / quote replies on the SAME thread. Well click one min take me to a thread back from 2010 and in which I have not posted in. Next mine the SAME link takes me to the actual thread while the other email link will say the post is invalid. Whats Causing this? Its not my computer or ISP as it does it on another device now that I check.
These are both the links
http://forum.xda-developers.com/showthread.php?p=49261794#post49261794 - As of right now its taking me where it should 10:22AM EST
http://forum.xda-developers.com/showthread.php?p=49261814#post49261814 - This one is supposed to be for the SAME thread but it says Invalid now as of 10:22AM EST
EDIT: 10:44 AM EST now taking me to some Sim unlock thread...
Also I refeshed this thread to check if anyone responded and it took me to a different thread just by refeshing
Click to expand...
Click to collapse
I don't see anything about a sim unlock thread, but post 49261814 doesn't exist. I assume it is because that post was deleted.

Related

Unable to edit wiki?

Hi there,
I've just signed up so that I could reformat http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_Boot_Image , but I can't seem to login to the wiki.
I've tried with Firefox 3.5 and Safari 4, both show the board software indicating a successful login, before redirecting back to the wiki where the login box is still present and "you need to login to edit.."
I tried clearing cookies for wiki.xda-developers.com, but it didn't help.
I am not sure, but probably you need to have a certain amount of Posts before you can update the wiki
Hmm, is there perhaps some way I can get around this? Really every question I have has probably been answered 100 times over, and asking them again just to generate credit seems a bit silly. The only thing I can help contribute to is organizing the existing information..
"To be able to create or edit pages, you need to be registered as a user at xda-developers.com. If you are not registered as a user then go to http://forum.xda-developers.com and click 'register' in the menu on the top of the page. Once you're logged in to the forum, you will automatically also be logged in here. If you have an xda-developers account but aren't logged in, simply click the 'sign in' link on the bottom of this page."
You should ask the admin in this concern.
Thanks corepda, Addicted2xda.
I'll see about finding an admin to ask. There is no 'sign in' link, only the standard phpWiki login box, which seems to be wired to the forum login script. However simply clicking the login button gives me a login failure (as per the paragraph you quoted), and entering my username+pw logs me in at the forum but not at the wiki..
Just to say same for me just get looped
stylez said:
Just to say same for me just get looped
Click to expand...
Click to collapse
Hmm, and you've been a member for over a year. Looks like something is broken. Anyone know who the admins are, or how to ask the forum software to message an admin?
Ok, I found the 'message admins' link and sent them a link to this thread. Yay!
Thread repoted to the staff, I am sure they will reply at the soonest to give you an appropriate reply. Good Luck.
IvanDobsky said:
Hmm, and you've been a member for over a year. Looks like something is broken. Anyone know who the admins are, or how to ask the forum software to message an admin?
Click to expand...
Click to collapse
Yeah i have had to get other users to edit the wiki when needed, but never thought to bring it up, so i'd guess it's accounts and not a xda wiki issue?
ok peeps,
http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_Boot_Image
You can see that i have been able to edit the said wiki. Can you give it another go and reply back here. If there is still a problem i will notify admin.
Greetz.
TIm.
timmymarsh said:
ok peeps,
http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_Boot_Image
You can see that i have been able to edit the said wiki. Can you give it another go and reply back here. If there is still a problem i will notify admin.
Greetz.
TIm.
Click to expand...
Click to collapse
Same here:
Exactly what happens:
I'm logged into XDA i go to WIKI and choose article, click edit and the log in field pops up i enter my XDA login and it goes to the signing in pop up and loops back to the login.
I think the admins need to look into this.
I've asked Flar to get someone to look at it.
Dave
Hey Luke you are not allowed to edit WIKI because you didn't send me birthday pics.
LOL
matter is getting really hot. But I am able to edit wiki, not that much qualified to put anything that deserve change though.
corepda said:
Hey Luke you are not allowed to edit WIKI because you didn't send me birthday pics.
LOL
matter is getting really hot. But I am able to edit wiki, not that much qualified to put anything that deserve change though.
Click to expand...
Click to collapse
Pic in your PM bruv, been so buzy in the kitchen that i forgot Yep it's always my fault things don't work
Dave:
Thanks hope this get sorted as muchos to add to Dash Wiki
Hi all,
Sorry for my late reply the issue escaped my attention.
I've been able to reproduce the issue with a test account, but am unable to fix it myself. I have notified our sysadmin and wiki admins and they will take a look at the issue as soon as possible.
Best regards,
Flar
i think it is ok that new members can't edit the wiki...i am able to do it and i posted a page few days ago so everything is ok from my point of view and the wiki is still editable
remember the wiki vandalism?
and when our ftp went down?
so don't rush to deal with it...it is just fine this way
farukb said:
i think it is ok that new members can't edit the wiki...i am able to do it and i posted a page few days ago so everything is ok from my point of view and the wiki is still editable
remember the wiki vandalism?
and when our ftp went down?
so don't rush to deal with it...it is just fine this way
Click to expand...
Click to collapse
1. This issue seems to have nothing to do with being a new member or not, my test account has the same issue and that's been here just as long as I have been.
2. Wiki vandalism has nothing to do with being a new member, a new member can just as well have useful info to share.
3. FTP downtime? what has that got to do with it? The last ftp downtime I could remember had nothing to do with new members but with us not scanning for viruses.
Best regards,
Flar
Flar said:
1. This issue seems to have nothing to do with being a new member or not, my test account has the same issue and that's been here just as long as I have been.
2. Wiki vandalism has nothing to do with being a new member, a new member can just as well have useful info to share.
3. FTP downtime? what has that got to do with it? The last ftp downtime I could remember had nothing to do with new members but with us not scanning for viruses.
Best regards,
Flar
Click to expand...
Click to collapse
i know that new member doesn't stay for those who do things to wiki...but they potentially are a bigger threat than people who are here for ages...not saying that ivan will do but...there are a lot of crazy people who will sign in just to do damage
not specifically the last one...but things like the one that happened in 2005..someone bashed it..there is a whole thread about it
farukb said:
i think it is ok that new members can't edit the wiki...i am able to do it and i posted a page few days ago so everything is ok from my point of view and the wiki is still editable
remember the wiki vandalism?
and when our ftp went down?
so don't rush to deal with it...it is just fine this way
Click to expand...
Click to collapse
Not forgetting i'm no noob & have additions for WIKI.
Flar:
Thankyou for looking into this and look forward to being able to edit the WIKI

Had problems submitting my first post.

Hello,
I had some problems submitting my first post to this forum. I always got this error message:
1.To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
... and wondered what went wrong. I had no outside links in my posting and decided to wait for some time, maybe it was a temporary problem with the forum. After then I tried to post my message again. Same error.
After some brain work I noticed my mistake:
in my nickname I have a (at). Maybe the rule set for the e-mail-filter is a bit restrictive, so it wrongly validates every (at) in the posting.
Should be only taken as an advice to maybe adjust the filtering or at least the error message a bit.
best regards
gu(at)no
[email protected] said:
Hello,
I had some problems submitting my first post to this forum. I always got this error message:
1.To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
... and wondered what went wrong. I had no outside links in my posting and decided to wait for some time, maybe it was a temporary problem with the forum. After then I tried to post my message again. Same error.
After some brain work I noticed my mistake:
in my nickname I have a (at). Maybe the rule set for the e-mail-filter is a bit restrictive, so it wrongly validates every (at) in the posting.
Should be only taken as an advice to maybe adjust the filtering or at least the error message a bit.
best regards
gu(at)no
Click to expand...
Click to collapse
Maybe trying to find clever ways to put sh*t as your user name, wasn't as clever as you thought ?
Hello, I have a problem in my first Thread. I would send a new ROM for the raphael, but it gives me this error "To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed."
how can I do?
thanks for all answers.
blaste said:
Hello, I have a problem in my first Thread. I would send a new ROM for the raphael, but it gives me this error "To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed."
how can I do?
thanks for all answers.
Click to expand...
Click to collapse
Check your PMs
Mike
ok, thaks!
i have the some problem like friends up
Bartezz612 said:
i have the some problem like friends up
Click to expand...
Click to collapse
I would do what the warning/restriction says and contact a moderator.
JAguirre1231 said:
I would do what the warning/restriction says and contact a moderator.
Click to expand...
Click to collapse
I wouldn't
There's nothing we can do. The restriction is on posting links and images. It automatically lifts after the member posts enough times.
It was added to prevent spam bots and it has worked wonders.
Dave
DaveShaw said:
I wouldn't
There's nothing we can do. The restriction is on posting links and images. It automatically lifts after the member posts enough times.
It was added to prevent spam bots and it has worked wonders.
Dave
Click to expand...
Click to collapse
So...... it was a lie? False advertising I say, even if the product is the ability to post links.
JAguirre1231 said:
So...... it was a lie? False advertising I say, even if the product is the ability to post links.
Click to expand...
Click to collapse
Contact us by all means, but we will tell you we can't help .
I have asked if this can be re-worded at some point in the future.
Dave
work in progress said:
If you can't help new users post questions, then this forum isn't worth a**** !!!!! I will go to another site where the people aren't as useless and ***** as you are!!!!!
Click to expand...
Click to collapse
You will be dearly missed. New members are allowed to post questions...just not links without mod approval. Have fun at your new site.
I'm having the same issue. I get the following message, which is different from the one above:
"To prevent spam to the forums, ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!"
But I do not have any links in my message.
What are the characters the forum SW parses as links?
bozothedeathmachine said:
I'm having the same issue. I get the following message, which is different from the one above:
"To prevent spam to the forums, ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!"
But I do not have any links in my message.
What are the characters the forum SW parses as links?
Click to expand...
Click to collapse
Images also count as part of the check, or anything starting http:// (IIRC).
If you are still having problems, try uploading the BB Code to pastebin (or similar).
Dave
bozothedeathmachine said:
I'm having the same issue. I get the following message, which is different from the one above:
"To prevent spam to the forums, ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!"
But I do not have any links in my message.
What are the characters the forum SW parses as links?
Click to expand...
Click to collapse
I believe it can also detect links as being strings separated by at least one dot, with a slash "/" present...
But I think Dave might be right about the http part. Try a basic post, removing anything other than plain text, then add the suspected parts in via edit, and see what it is rejecting.
I think I found the issue. I didn't have any "http", slashes, or images.
I was trying to post the handset info from my HTC Hero, which contains all manner of random characters, including the hash sign. I'm thinking it was that which was marked as spam.
Three posts down, 5 to go before I can start making sense.
Thanks for the assist.

[REQUEST] Buggy outside links regex

Hello,
I'm a new member. I read all of your rules, I watched your 'You are a noob' video, I read some of your stickies, then I decided to post my first message carefully trying not to break any rule.
I wrote my first message but your vBulletin refused to post it because of an error in my submission:
To prevent spam to the forums, ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!
Click to expand...
Click to collapse
That's quite a great welcoming!
My message contained no outside links, no images and no smileys. So it seems that your regex is buggy and is not able to tell the difference between a legitimate message and a message containing outside links. Kinda noob!
Is it possible to fix this problem? If you need help, you can contact me (even if I am a noob! ) and I'll fix it for you.
Thank you
Can you place your post on PasteBin and let me know which forum you were trying to post it in and I'll take a look.
The Regex will be from a 3rd Party plugin - as are most of the extras on this site .
Dave
Don't worry, my message had an at sign that was mistakenly interpreted as an 'outside link'. I changed it with (at) and I posted it.
I was asking to fix this problem just to avoid some frustration to other noobs like me
Thank you anyway
We'll look into this and get this fixed in the next few days. Thanks for letting us know!
I'm happy to report this error has been corrected
svetius said:
I'm happy to report this error has been corrected
Click to expand...
Click to collapse
I just got the same error message while attempting to include the Quote ("Quote message in reply") - worked fine without that option.
(including quote to see if it is reconstructable)
Edit:
the post in question was:
http://forum.xda-developers.com/showpost.php?p=20333009&postcount=425

[Request for Moderator/Admin Assistance] Request to verify new user account.

I recently received this error message while attempting to update a post with a logcat attachment that I had meant to attach to the post originally but forgot to.
To prevent spam to the forums, new users must wait five minutes between posts. All new user accounts will be verified by moderators before this restriction is removed.
Click to expand...
Click to collapse
Now I know I'm not a terribly active poster, but I would hardly qualify myself as new, since I joined back in Aug. 2010. How can I go about verifying my account to avoid this in the future? Also, is this the appropriate forum, or should it go under Q&A instead.
Thank you for your assistance.
There is a lot of replies that covered your question. You need to have 30 posts to have these restriction lifted. We can't do anything about that.
Thread closed.

This site is hacked and is being reported...

I just reported an issue with this site regarding security certificate and it was deleted within 10 seconds.. This site is hacked and I am reporting it immediately. Stay away from XDA
No one deleted any of your posts (I just checked). Your other thread is literally right below this one.
I am closing this one, please do not post the same thread, someone will reply to your original one.
edit: I did just delete 3 of your posts that just said "please delete," however...

Categories

Resources