Hi Guys,
As you have requested, please find below the build of OmniRom for Nexus S 4G.
What works :-
Almost Everything.
What Doesn't work :-
1. WiMax.
2. You tell me.
Needs Testing :-
1. Torch ( Need to wait for around a min or so for it to start turning on the torch, need to look further into this issue. )
The Usual Warnings, and cautionary lines..
Sincere thanks to :-
1. OmniRom Team
2. Codeworkx
3. Google
4. Linus
Use the latest CWM, or TWRP from my other thread.
Build 12:-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQENExEZnRVUThTRVU/edit?usp=sharing
Changelog :- Repo Synced - Android 4.4.4. Partially working torch.
Build 11:-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEWWFfQnVaSUhXaTg/edit?usp=sharing
Changelog :- Repo Synced - Android 4.4.3.
Build 10:-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEQXVZemoyOTdpUHc/edit?usp=sharing
Changelog :- Repo Synced.
Build 9 :-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEbXRESlhYbDNtUUk/edit?usp=sharing
Changelog :- Repo Synced.
Build 8 :-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEb0RCdDJHZjUxcmM/edit?usp=sharing
Changelog :- Repo Synced.
Build 7 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEbnhya2NZUFJEUlE/edit?usp=sharing
Changelog :- Repo Synced. Included some jit preference as per google's low ram device settings. Try and see, if you don't like the outcome, delete it from build.prop.
Build 6 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEYmJIZ0xDQWcxLWs/edit?usp=sharing
Changelog :- Repo Synced.
Build 5 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEX3Q2ZzVPZG9XMlk/edit?usp=sharing
Changelog :- Repo Synced, zRam On. Incase of issues with flashing kernel, flashboot boot image.
Build 4 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEa3lGR2lVQmVvR2M/edit?usp=sharing
Changelog :- Repo Synced.
Build 3 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEbUxudG5YczA0SDQ/edit?usp=sharing
Changelog :- Repo Synced.
Build 2 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEN1oycDFBLVQ4dVk/edit?usp=sharing
Change log :- Latest omni commits; transparent status bar.
Build 1
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEUHRpcXdTbnlKM3c/edit?usp=sharing
Change log :- 1st Build. Repo synced.
Gapps (4.4 ) :- http://forum.xda-developers.com/showthread.php?t=2012857
Do let me know if there are any problems with the build. Been using the same build for some time.
Hit Thanks !
GApps 4.4 link is broken, can you please fix that
Can we use this GApps
(parandroid's gapps-full for 4.4.2 on Crespo 4G)
amitabhr said:
GApps 4.4 link is broken, can you please fix that
Can we use this GApps
(parandroid's gapps-full for 4.4.2 on Crespo 4G)
Click to expand...
Click to collapse
Sorry, Fixed.
Regarding PA Gapps, did'nt try, go ahead and test it !
PA gapps are what I use and they flashed fine for me.
Sent from my Nexus S 4G using xda app-developers app
I got everything running and all is well but I get this error message when trying to use the default launcher.
Sent from my Nexus S 4G using xda app-developers app
Looks like Google now isn't activated..
Sent from my Nexus S using XDA Premium 4 mobile app
Thanks for the reply. I have Google now running but if I click the launcher icon it gives me that error. Not sure if there is a setting I'm missing....
Sent from my Nexus S 4G using xda app-developers app
danger_doom said:
Thanks for the reply. I have Google now running but if I click the launcher icon it gives me that error. Not sure if there is a setting I'm missing....
Sent from my Nexus S 4G using xda app-developers app
Click to expand...
Click to collapse
It might be due to the Google Experience Launcher. My experience of installing PA ( which replaces Stock Launcher ) stuck at black screen with Notification bar working. It seems GEL has a problem with our device though am not sure if thats the same problem you are facing.
Hence, i shifted towards Banks GAPPS or PA which does not replace Stock Launcher.
Thank you for bringing OmniRom to the NS4G!
Sorry if I'm bothering you with this. I get the same error prompts in your omnirom too. I did a clean install (using Philz Touch Advanced CWM). I think it's a setting that is specific to these 4.4 roms vs the 4.3 ones. When I run the 4.3 roms from Slim roms or Hellycat, I don't get these errors prompts.
ERROR PROMPTS: "Unfortunately, the process com.android.phone has stopped."
ABOUT MY PHONE:
- no data plan.
- wifi-only device.
I PM'd you the logcat from this new omni build. I did an ADB logcat from bootup again. Please copy my logcats to your notepad or something. I will delete them off my dropbox by tomorrow, since I assume you do not need me to keep these files and links. I hope these logcats will help you with your builds. Thanks again for the time and effort you spend on these roms!
playdoc said:
Thank you for bringing OmniRom to the NS4G!
Sorry if I'm bothering you with this. I get the same error prompts in your omnirom too. I did a clean install (using Philz Touch Advanced CWM). I think it's a setting that is specific to these 4.4 roms vs the 4.3 ones. When I run the 4.3 roms from Slim roms or Hellycat, I don't get these errors prompts.
ERROR PROMPTS: "Unfortunately, the process com.android.phone has stopped."
ABOUT MY PHONE:
- no data plan.
- wifi-only device.
I PM'd you the logcat from this new omni build. I did an ADB logcat from bootup again. Please copy my logcats to your notepad or something. I will delete them off my dropbox by tomorrow, since I assume you do not need me to keep these files and links. I hope these logcats will help you with your builds. Thanks again for the time and effort you spend on these roms!
Click to expand...
Click to collapse
Hmm, interesting.. do you have at least Mobile Network. Nevertheless, if you are using it as wifi only,
Add the same in build.prop.
ro.carrier=wifi-only
And disable the following lines for good measure.
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=4
Send me the logcat after you try this.
adityaxavier said:
Hmm, interesting.. do you have at least Mobile Network. Nevertheless, if you are using it as wifi only,
Add the same in build.prop.
ro.carrier=wifi-only
And disable the following lines for good measure.
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=4
Send me the logcat after you try this.
Click to expand...
Click to collapse
Thank you! This works on this OmniRom build! No more error prompts!
Oddest thing about flashing this Rom though. I was able to successfully flash this OmniRom, after I first flashed your CM11 AOSP one (from this thread). I did a "clean to install a new rom" option in Philz Touch Recovery, of course. However, if I tried to install OmniRom after previously having Helly Rom, or even factory original (with root), I get stuck on the boot screen animation. I was able to recreate each of these scenarios at least twice. I'm probably making a newbie mistake somewhere. Thanks again for all your hard work with these Roms!
playdoc said:
Thank you! This works on this OmniRom build! No more error prompts!
Oddest thing about flashing this Rom though. I was able to successfully flash this OmniRom, after I first flashed your CM11 AOSP one. I did a "clean to install a new rom" option in Philz Touch Recovery of course. However, if I tried to install OmniRom after previously having Hellycat, or even factory original (with root), I get stuck on the boot screen animation. I was able to recreate each of these scenarios at least twice. I'm probably making a newbie mistake somewhere. Thanks again for all your hard work with these Roms!
Click to expand...
Click to collapse
Same EXACT situation here. I tried the Philz Recovery, different gapps, tried going from Hellybean etc but I can't get Omni past the boot screen. I will keep trying though. I REALLY want to get this past boot screen
Edit ....my NS4G is still fully active too so I can test everything. If someone can please post a link for the gapps that worked for you that would be great...unless the ones in OP are what those of you that have it running used. I tried the P.A full stock 4.4.2 and ones in OP but this was around 20 min after this thread went up. Thanks!
Sent from my HTC One using Xparent Gray Tapatalk 2
I'm a real minimalist with the GApps. I only installed Banks' GApps 4.4.2 Core, and just install a few other Google apps (i.e., Gmail) via Playstore.
I also install from zip, at recovery, the SuperSU update v1.86 (see: SuperSU thread), because I find I get errors with the baked-in Superuser in some Roms.
Another problem I have while using this OmniRom, is that this launcher keeps losing some (3 or 4) of the apps I put on the desktop/homescreens. It's repeatedly the same apps. (EDIT: Fixed with flashing the Rom again, after a clean install.)
JohnCorleone said:
Same EXACT situation here. I tried the Philz Recovery, different gapps, tried going from Hellybean etc but I can't get Omni past the boot screen. I will keep trying though. I REALLY want to get this past boot screen
Edit ....my NS4G is still fully active too so I can test everything. If someone can please post a link for the gapps that worked for you that would be great...unless the ones in OP are what those of you that have it running used. I tried the P.A full stock 4.4.2 and ones in OP but this was around 20 min after this thread went up. Thanks!
Sent from my HTC One using Xparent Gray Tapatalk 2
Click to expand...
Click to collapse
Try flashing pa modular full, that's the one am using. And format system partition before you flash omnirom.
playdoc said:
I'm a real minimalist with the GApps. I only installed Banks' GApps 4.4.2 Core, and just install a few other apps via Playstore.
I also install from zip, at recover, the SuperSU update v1.86, because I find I get errors with the baked-in Superuser in some Roms.
Another problem I have while using this OmniRom, is that this launcher keeps losing some (3 or 4) of the apps I put on the desktop/homescreens. It's repeatedly the same apps.
Click to expand...
Click to collapse
KitKat has the weird habit of automatically changing home screen pages on installation of new app instead of using the current one. If that's not it then can help you cause it never happened to me.
I was stuck on boot animation, after using Philz Touch (Advanced CWM Touch 6.0.4.5), and using "clean to install new Rom", sometimes combined with "clean cache, clean dalvik" for good measure. So, for experimentation purposes, I then used the CWM 6.0.4.3 Non-Touch, from Rom Manager app installation, then flashed this OmniRom again. After a long boot animation of the "Omni" symbol, the Rom successfully went to the homescreen.
EDIT: Unfortunately, same bootloops happen with NonTouch CWM 6.0.4.3. Again, the only time I got past boot animation is if I first flashed adityxavier's CM11 Unoffical 4.4.2 AOSP rom, then clean data/factory reset, clean cache, clean dalvik, then flashed OmniRom (wait for it, the boot animation takes a while).
To DEV:
- launcher losing my apps --> fixed with re-flashing of the Rom.
New issues:
(1) I have been getting distorted graphic rendering at times. It especially happens with some SuperSU prompts, and also some of the times I go to the Settings > Performance section. I'll try to logcat for you next time this happens, to catch these graphic rendering issues (assuming logcat will log these too).
(2) Issues with stock android email app, and Gmail app, not updating with any new email notifications, nor any new emails, using Banks' GApps (EDIT: Fixed with the 4th or 5th reinstall of the Rom.)
Could someone tell me how to add widgets to the lockscreen?
Sent from my Nexus S 4G using XDA Premium 4 mobile app
jcruz767 said:
Could someone tell me how to add widgets to the lockscreen?
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Press your "menu" hardkey, or longpress an empty space on the homescreen, there should be a "widgets" option from there, to add widgets to the homescreen.
EDIT: No Lockscreen widget option, that I know of, yet. Will post again if I find it.
I tried it on the lock screen and nothing came up
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Finally got this to boot up, but WiFi doesn't seem to scan any networks. Any ideas?
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Related
This build of CM10 will only keep up with what is actually merged into the code for CM10. Primarily this was made because of how infrequent the building goes with the official nightlies, but now i continue on regardless of anything...
Code:
We are not responsible if you brick your phone, for any bugs in the rom,
or if your cat decides to eat your phone because its now full of awesome.
This build is very much identical with the official build, u can switch from official and my build without any fear of having to wipe your phone.. the only difference is that i have the build script change the cyanogenmod version to more reflect like a nightly
I'll start build in the evenings, probably take a little bit depending on how much is new and the real wait is me actually uploading it.. (I have terrible upload speeds!)
Known Issues:
None
Instructions:
Download rom
Go to recovery
Wipe rom if coming from another rom, u dont have to wipe if ur coming from official nightly
Flash rom
Flash gapps, this u dont have to do every time just when u first come to the rom (the rom backs up gapps)
Boot into rom
???
Profit!
Current and older builds can be found here: http://code.google.com/p/team-keyblade/downloads/list
Latest GAPPS: official gapps
Aternate gapps that will sync gallery to picasa if you need this, but you will lose some CM features in camera and other apps. First gapps link is recommended by Cyanogenmod and kalimichoaz(official Maguro cm dev): alternate gapps
To all people saying thanks: Your welcome!! =^_^=
Reserved just in case...
First......
Two...I respect your work.
aish_varya said:
First......
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh::laugh::laugh::silly:
sorry, but you just said you are responsable for our devices? in the case we brick it..... correct the op.
What's the difference with other nightlies?
Madflapjack said:
sorry, but you just said you are responsable for our devices? in the case we brick it..... correct the op.
Click to expand...
Click to collapse
Fixed...Sorry for the typo. I appreciate you pointing out the error of my ways. I love how peacefully and kindly you did it too.
He4dShOt said:
What's the difference with other nightlies?
Click to expand...
Click to collapse
All this is, is stock CM10. No additions, no themes and no additional tweaks. We build this because before there are nightlies, the builds are few and far between. We will build on a daily basis so whatever is merged into the CM code will be in our Rom. It is interchangeable with the "Official" CM10 Rom and can be flashed with just a cache and dalvick cache wipe if coming from the "Official" CM team build.
Please let me know if you have any problems with Google + and Google Talk Force Closing. I just found out that I am having this problem and am trying a full wipe with the latest GAPPS. If you are having this problem we will find a different GAPPS that will work.
Camera not working... First it freezes asking if I want to close it. Then a FC. Talk keeps dying as well ...
Sent from my Galaxy Nexus using Tapatalk 2
Skype also fails to log in. Keeps saying it force closed and asking me if I want to try again.
Sent from my Galaxy Nexus using Tapatalk 2
GPS is not working. Talk force closing. G+ seems ok
I'm having the same problems guys and gals. I'll try to have a working build tmrw. Everything works great but those few things.
Sent from my Nexus 7 using xda premium
New build at link in OP. GPS, gtalk, G+ and camera all working now. Please let me know if you find anymore bugs. I have tested themes, camera, gtalk, phone, messaging and gps. It should work great!
Today's build is up. Use link in OP. There's been a lot of work since yesterday's build. Sorry for the lack of a changelog, but you can check the commits here: http://review.cyanogenmod.com/#/q/status:merged,n,z
So if I install this I won't have to wipe all my apps and settings to upgrade when the official cm10 is released? That's my biggest concern... I hate having to redo all my settings! I don't know how so many people are okay with switching roms so much when you have to do that. Gets very tiresome...
I just want to run something I can stick with that continues to get updates without me having to worry about doing another full wipe in the future
Sent from my Galaxy Nexus using xda app-developers app
colonelcack said:
So if I install this I won't have to wipe all my apps and settings to upgrade when the official cm10 is released? That's my biggest concern... I hate having to redo all my settings! I don't know how so many people are okay with switching roms so much when you have to do that. Gets very tiresome...
I just want to run something I can stick with that continues to get updates without me having to worry about doing another full wipe in the future
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
yep! that's one of the reasons we do pure cm10 builds.. no wiping!
Sent from my Galaxy Nexus using Tapatalk 2
Changelog
8/7/12
Trebuchet: AppWidgetResizeFrame: Allow resizing to any size
Trebuchet: Preferences: Auto-rotate screen
Trebuchet: CM Preferences Category
Trebuchet: Preferences: Grid Size
kernel: offline charging fix
I use rafael salas version of cm10,but his rom does not contain trebuchet launcher,could you please share trebuchet launcher?
Thanks in advance.
Sent from my Galaxy Nexus using Tapatalk 2
Is this ROM still active? I just started using it on my sprint nexus but there doesn't seem to be much activity here.
4.3.1 Stable [DanKang] Slim + optimizations (11/04/13)
I am not responsible for any bricks or issues you might encounter, This ROM is tested and stable and should only be flashed on T999 devices
As many of you may know Slimbean is one of the most popular ROMs out there and the team has released the last stable until Android 4.4, on top of that our device maintainer is MIA and busy with real life.
I noticed 2 issues in stable 2 that prompted me to take this masterpiece the slim team as created for us and fix them, I take no credit for this the bugged back animation (this made me dizzy) and returning to stock DPI causing the Google services framework to frequently disconnect that made it into stable build 2 are resolved in this ROM, I also ship the ROM with a stock minimal GAPPS package that will allow the apps to be properly updated in the market Everything else is butter I take no credit for this! all the credit goes to the slim team
For a full list of features, see this chart
-Stock S3 DPI
-Changed default notification sound and ringtone
-CM alarms, notifications and ringtones
-Organized settings (Much cleaner now IMO)
-APK's that aren't required have been removed
-Lockscreen unlock and lock handles are once again default AOSP
-Default AOSP walpaper on boot
-Stock Nexus boot animation
-Official Google Keyboard
-AOSP email included
-Inverted MMS by default - Look at the app settings before posting questions Mark read, etc is all there
-Added clock widget from CM 10.2 (System/app)
-Fixed glitched back animation
-Full GPU rendering (the way it should be)
-No ROM branding, you will not see the words Dan and Kang anywhere on the ROM
-Latest KT Kernel
-Mpdecision disabled (This is recommended for KT kernel)
Install Instructions
-Full wipe (Caches, system, etc.)
-Install ROM
-Flash GAPPS provided
-Reboot
-Enable root in developer settings
Q) Root doesn't work! (4.3 only)
A) From a clean build you need to enable root access for Superuser itself. This is different from 4.2.2 in which Superuser by default had root access on a new install. To do this, go toSettings -> Developer options -> Root access. If an app attempts to request root access before Superuser itself has access, it may cause problems with that app in the future where root requests are silently denied.
Instructions to enable root on Android 4.3
Open Settings>about
Tap on the build info 7 times to enable dev settings
open developer settings and enable root (select Apps + adb)
enjoy
Changelog
Code:
11-04-2013
-Removed music.apk (wasted space)
-Ship with latest KT kernel (will fix wakelocks and greatly improve battery life)
-mpdecision removed (unneeded, use ktoonservative governor in KTweaker)
(if your not using Ktoonservative, remember to check auto hotplug on all NON hotplugging governors)
-Final build
10-30-2013
-Removed Dark UI, if you need this don't update
-Fixed MMS security limit
-Stock CM kernel
-Should be rock solid now ;)
10/28/2013
-Initial release
Credits:
Slim team - Donate to these guys, seriously....
CM team
AOKP
XDA Developers
More that I might be forgetting
Downloads:
DanKang 4.3.1 11/04/2013 STABLE
md5: 348d9941d3ade514c3544e94274e9919
GAPPS - use this one
-Slimmed down version of the stock GAPPS, This will allow apps to update properly from the Market
Kernel Source:Here
Donate to ktoonsez here: http://forum.xda-developers.com/donatetome.php?u=4325945
If you like this ROM, Donate to the SLIM team here: http://www.slimroms.net/index.php/donations
I take no credit for this
Good post, I remember testing this. It was the most stable AOSP ROM apart from AOSP itself!
The Return of the King... Err KANG!
Sent from my SGH-T999 using Tapatalk
Looks awesome! Will be giving a go. Good ol' AOSP
If this AOSP rom is good enough for Dan, than its good enough for me.
Sent from my SGH-T999 using XDA Premium 4 mobile app
I'm a little aroused right now... Gonna have to try this over the weekend!!
DC2CA said:
I'm a little aroused right now... Gonna have to try this over the weekend!!
Click to expand...
Click to collapse
LMFAO!
Yeah, I'm gonna take a break from 4.3 TW and come here and lay my feet up. This ROM is a dream, no questions asked.
I'm getting gapps force closes with the new gapps from the link
Sent from my SAMSUNG-SGH-T999 using Tapatalk
DNA420 said:
I'm getting gapps force closes with the new gapps from the link
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Click to expand...
Click to collapse
full wipe, I've had many testers and its not a problem on my end
Seems to only happen after reboots, i will try wiping
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Rom doesn't play well with kernel changes...
Edit: was just using the wrong tweak app
Sent from my Nexus 7 using Tapatalk 4
Kevin Goot said:
Rom doesn't play well with kernel changes...
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
what are you trying to do? I have no issues
This post isn't much help bud
Danvdh said:
what are you trying to do? I have no issues
This post isn't much help bud
Click to expand...
Click to collapse
Then don't reply bud... I got it anyway though
Sent from my Nexus 7 using Tapatalk 4
Is it safe to assume this has all the toggles? What about tethering?
I'll be flashing Thursday night I think.. Can I get a Halloween theme?
Kevin Goot said:
Then don't reply bud... I got it anyway though
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Glad you got it man, sorry I came across a little... rude
stupid typing lol
DC2CA said:
Is it safe to assume this has all the toggles? What about tethering?
I'll be flashing Thursday night I think.. Can I get a Halloween theme?
Click to expand...
Click to collapse
you will not be a short for features, tethering, bluetooth, usbaudio all work
I'm going to have to give this a run I'm on stable 2 right now and its been nice
Sent from my SGH-T999 using xda app-developers app
APN Settings?
After flashing I have no network connection. Checked APN and there are no entries, tried resetting to default. Also was unable to find a mobile network to connect to. I came from Dirty Unicorns ROM, performed a full wipe before installation. Also when I go to network selection I get the error, "Error while searching for networks."
Any ideas? Wiping and installing again just to be sure right now.
cleonjones said:
After flashing I have no network connection. Checked APN and there are no entries, tried resetting to default. Also was unable to find a mobile network to connect to. I came from Dirty Unicorns ROM, performed a full wipe before installation. Also when I go to network selection I get the error, "Error while searching for networks."
Any ideas? Wiping and installing again just to be sure right now.
Click to expand...
Click to collapse
Did you check for your IMEI? It happens, when TW to Custom 4.2 to Custom 4.2.2 to Custom 4.3 to Custom 4.3.1
Happened to me, from Slim 4.2.2 and tried a 4.3
Sent from my SGP311 using Tapatalk 4
I've just installed this and love it already, but I have a question. Is it possible to use the stock launcher instead of NOVA?
ndwgs said:
Did you check for your IMEI? It happens, when TW to Custom 4.2 to Custom 4.2.2 to Custom 4.3 to Custom 4.3.1
Happened to me, from Slim 4.2.2 and tried a 4.3
Sent from my SGP311 using Tapatalk 4
Click to expand...
Click to collapse
I have an IMEI on my current ROM which I restored, I will flash this ROM again and check if my IMEI is gone. Is it possible to pull the IMEI from the ROM where it's still in-tact and restore it to this ROM?
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.
Good Morning fellow XDAers.
Here is a Pure AOSP KitKat build pulled from Google source found HERE
I will try to keep this updated with most recent source builds and minor tweaks. This makes for a good base for anyone to build from for a pure AOSP source. Just wanted to get it out there for people to use.
Instructions.
It is highly recommended that you flash using CWM recovery. TWRP may be updated but I haven't used it since KitKat released Again, if you brick your device, it's your fault not mine. This is a Beta so by clicking the download links you are taking full responsibility.
*Backup your current ROM
*Make sure you are using CWM recovery
*Do a complete system wipe
*Flash Rom
*Flash Gapps
*Flash Superuser pack
*Reboot and enjoy
Update 12/18
* enabled app ops - ability to specify which permissions you want to turn on/off for each app
* increased email attachments allowance to 20mb
* any file type transfer thru Bluetooth
* closed some memory leaks
* art tweaks
* animation cut in half for stock launcher
* up to date with Google merges via android-review.googlesource.com
Download aosp_manta-KOT49H-20131218 HERE
Update 12/15
* Added OTG Support
* Added merges from android source that wasn't in 4.4.2
* More location tweaks
* Added Override allowance in source
* Changed to toolchain 4.8
* Build.prop tweaks
* You can dirty flash over previous versions, just make sure to flash gapps, then SU to retain root.
Download aosp_manta-KOT49H-20131215 HERE
Update 12/12
* Updated to 4.4.2
Download v1.6 HERE
Update 11/22
* Pie controls in Browser enabled
* doubled the allowed downloads
Download v1.5.1 HERE
Update 11/21
* Updated to 4.4 r1.2 source
* Updated Kernel
* Updated Props
* Disabled Securities in Email (please test)
Download v1.5 HERE
Update 11/17
* added reboot menu
* added screenshot to reboot menu
Download v1.4 HERE
Update 11/14 (Pure AOSP Manta 4.4 r1.1)
Download ROM from HERE
Needs testing but youtube works through the browser fine. Please make sure you have a fresh wipe, then flash rom, gapps, su, reboot. Also, you may experience gapps fc if you enable ART. Since it is still ART is still experimental, I would hold off of that for now.
My keyboard doesnt pop up any longer using the new googlehome.apk. it took a little bit to settle down but if you have the issue either deal with the glitch or delete the apk from /system/app
Alpha upload 11/11
Download ROM from HERE
Download 4.4 Gapps from HERE 4.4.2 Gapps from HERE
Download SU from HERE
Thanks to a good buddy for motivating me to even get back in to compiling and messing with source. It's been awhile. Could the retirement be over? not likely. But you never know. Once Google releases the updated props I will update the OP.
Enjoy!
Don't be cheap. If you download hit the thanks button. It's free!
Just in case for apps or mods
you never know if a third is needed
Decided to put it out there eh?
Did you enable transparency in this build?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Noobla_Khan said:
Decided to put it out there eh?
Did you enable transparency in this build?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Yeah, transparency is done, and some other low level tweaks. Over all it's very good. We really need the props released to finish the build correctly.
Leoisright said:
Yeah, transparency is done, and some other low level tweaks. Over all it's very good. We really need the props released to finish the build correctly.
Click to expand...
Click to collapse
Cool...I don't think SlimKat or CM11 builds had the transparency enabled(may have changed since I last tried them) so this would be good way for people to check that out since the word is it won't be enabled on the Nexus 10 when Google releases.
Noobla_Khan said:
Cool...I don't think SlimKat or CM11 builds had the transparency enabled(may have changed since I last tried them) so this would be good way for people to check that out since the word is it won't be enabled on the Nexus 10 when Google releases.
Click to expand...
Click to collapse
I better double check. If it isnt I will fix and upload. I thought I did it but was a late night...lol
edit.. it wasn't done. But it's being uploaded right now with it done. Also, swapped out to have the stock native wallpaper_default.jpg. Should be done in less then 10 minutes and will update the op after.
Hoping to have fixed the USB OTG problem too.
Sent from my SPH-L900 using XDA Premium HD app
Thanks for your work! Sounds like the official 4.4 is rolling out already. Looking forward to the final product!
It would be nice to get the binaries so we can have a proper AOSP build.
I will be working on this tomorrow afternoon. Got the ota updated and system pulled. Now that we have full props we can polish off this aosp. You'd be surprised how similar this really was. Hope the props fix the video glitches.
Sent from my Nexus 10 using XDA Premium HD app
looking forward to this! thanks
Art working well on this build using the odex gapps
Sent from my One using XDA Premium HD app
4.4 binaries have been posted by google. I should have a release sunday. Couple busy days ahead. Have the reboot to recovery working but once I added a system pull binaries it wouldnt boot. So need to dig in to see if we need a new kernel. Either way good days ahead.
edit: Ok, factory images have been released for us. But, there is also a new build tag for the manta. Will be release 4.4 r1.1. It contains a different kernel as suspected. SInce this is the case, I decided to just start fresh with a new sync.
Sent from my SPH-L900 using XDA Premium HD app
Woohoo, we have a full booted pure aosp 4.4 r1.1
Will post link in op..give me a few
Edit..Youtube app works great. Now the fun begins. I want to keep this as close to pure as possible. The 4-1 reboot menu and OTG is a must. but then just transitions and stuff like that. Have fun with the rom gang.
Leoisright said:
Woohoo, we have a full booted pure aosp 4.4 r1.1
Will post link in op..give me a few
Edit..Youtube app works great. Now the fun begins. I want to keep this as close to pure as possible. The 4-1 reboot menu and OTG is a must. but then just transitions and stuff like that. Have fun with the rom gang.
Click to expand...
Click to collapse
Is the ROM still in Alpha status?
jackie_jagger said:
Is the ROM still in Alpha status?
Click to expand...
Click to collapse
I think we can move it up a couple notches. All the apps work now. Transparency Nav bar modded
Sent from my Nexus 10 using XDA Premium HD app
Leoisright said:
I think we can move it up a couple notches. All the apps work now. Transparency Nav bar modded
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
Gotchya, I'll give it a shot once Mediafire starts working. It seems to be down for maintenance. If I may ask, how does the performance compare to 4.3? I ask because I'm hearing conflicting reports of being fast and the same for some.
EDIT: It won't work on TWRP?
jackie_jagger said:
Gotchya, I'll give it a shot once Mediafire starts working. It seems to be down for maintenance. If I may ask, how does the performance compare to 4.3? I ask because I'm hearing conflicting reports of being fast and the same for some.
Click to expand...
Click to collapse
I think with ART vs dalvik there seems to be a boost. It runs smooth as silk. Also, I have Google home installed and it settled down now where the keyboard stops popping up when you hit the home button.
Only think I see not working so far is the tap n pay in settings. Says services not installed.
Even the print seems good once you install an HP print app. Synced right up to my printer. Its work a full wipe then flash ROM, gapps, and then su. Make sure you back up. But I wanted a fresh install for KitKat anyway.
Edit... I don't think twrp updated the recovery yet for KitKat. Use a cwm 6.0.4 version and its golden
Sent from my Nexus 10 using XDA Premium HD app
I just installed this about 30 minutes ago and so far its running great. I am using ART instead of Dalvik and it runs really well and smooth. There was only a small sluggishness to it for me when I would go left to Google Now, but after using it for a little while it seems to have gotten better.
Youtube worked awesome and so has everything else, Gmail, Chrome, Google Plus, etc. The transparency looks amazing on this tablet, great job!! As of right now this rom's a keeper for me.
Edit* I also installed this with the newest CWM. I tried using TWRP yesterday on a few other 4.4 roms and it would fail each time.
Leoisright said:
I think with ART vs dalvik there seems to be a boost. It runs smooth as silk. Also, I have Google home installed and it settled down now where the keyboard stops popping up when you hit the home button.
Only think I see not working so far is the tap n pay in settings. Says services not installed.
Even the print seems good once you install an HP print app. Synced right up to my printer. Its work a full wipe then flash ROM, gapps, and then su. Make sure you back up. But I wanted a fresh install for KitKat anyway.
Edit... I don't think twrp updated the recovery yet for KitKat. Use a cwm 6.0.4 version and its golden
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
I'm running TWRP recovery on my Nexus 5 so I guess it does work. But I'm not sure if there is an updated image available for manta. I'll check it and try
This is an unofficial build of Omni Rom based on KitKit 4.4.2. There is no official support for the d2 variants. Props to androidsftw for picking apart what was needed for our d2s.
I am not the dev of this rom, all I did was add in necessary device/vendor/d2 files for d2. This is not a port, everything has been built from source.
As with all things root, I am not responsible for anything that happens while flashing this rom. You take responsibility for your actions. Nandroid is your friend.
----------------------------------
Downloads:
Omni Rom for the D2LTE - Droidhype Roms
GAPPS 4.4.2 - PA 0-Day
SuperSU - Chainfire
Kernel (optional) - BMS
----------------------------------
Installing for the first time? Grab the newest full zip from the D2LTE directory. For future updates, just go to Settings -> System Updates and let the magic happen.
HOW TO INSTALL
1. Factory Data reset
2. Wipe System/Data/Dalvik/Cache
3. Install ROM zip from Sdcard
4. Install GAPPS zip from Sdcard
5. Install SuperSU from Sdcard
6. Reboot to home screen to confirm good flash
7. (Optional) Reboot to recovery and flash kernel
TO USE DELTAS, YOU HAVE TO USE TWRP OR PHILZ RECOVERY. CWM WILL NOT WORK BECAUSE IT DISABLES SCRIPTING CAPABILITIES BY DEFAULT. If there's anything that you want the updater to flash automatically after it flashes your update, put the file(s) in the FlashAfterUpdate directory inside your Opendelta folder in your internal storage.
Join the BMS G+ community which will have quicker release info in the future for all things BMS and roms.
Enjoy!
Cherry-picks:
- Multi-window
This build is unofficial, so I don't exactly carry around a changelog. However, you can always check cmxlog for omni and see what's been changed with each version of one of their nightlies. It won't be exact as some have specific device merges, but it will give you a good idea. The dates on my builds will correspond with the officials listed on cmxlog.
You can also check their gerrit or git to see what's been merged.
This question gets posted pretty frequently so if some users could please bookmark this post, we can just repost it when needed. Here are all the links you can peruse for your changelog/update enjoyment.
cmxlog - http://omni.cmxlog.com/4.4/
gerrit - https://gerrit.omnirom.org/#/q/status:merged,n,z
github - https://github.com/omnirom/
G+ - https://plus.google.com/u/0/communities/102450203113748251717
XDA - http://forum.xda-developers.com/omni
XDA:DevDB Information
Omni Rom for the d2tmo, a ROM for the T-Mobile Samsung Galaxy S III
Contributors
GideonX
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Omni
Version Information
Status: Beta
Created 2014-02-18
Last Updated 2014-02-18
Reserved
FIRST!
Thanks, Will try!
2nd haha anyways will give this a try when i get home c:
Sent from my SGH-T999 using xda app-developers app
Hell yes finally, thanks for this for sure
Sent from my SGH-T999 using Tapatalk
So what I'm getting is that a d2lte build will work on all d2 variants, no updater-script editing required?
Screenies??
As GideonX has said, these builds support all the d2 variants. Everything is automatically done during flashing. You don't need to do anything but flash like normal
downloaded and working
Except for su recconising apps. have tried manual install also just can't seem to make it work. appreciate this rom otherwise. will keep trying. thanks:good:
Is anyone having problems with swipe typing?
trofmoc said:
Except for su recconising apps. have tried manual install also just can't seem to make it work. appreciate this rom otherwise. will keep trying. thanks:good:
Click to expand...
Click to collapse
4.4 needs special twrp jyst in case you restored back on to tw or never updated.
Anyways seems like the rom had little to offer in my personal opinion. I decided to just go an restore previous rom instead
Sent from my SGH-T999 using xda app-developers app
I just installed the Rom! Working great! Thank you.
Wp4Wp4:good:
twrex82 said:
Is anyone having problems with swipe typing?
Click to expand...
Click to collapse
Try PA's gapps. If you're talking about how no letters actually get inputted on the screen even though it is showing the swipe, then that's what you need.
http://forum.xda-developers.com/showthread.php?t=2397942
New D2LTE 2014-02-21 Build - http://goo.gl/zJwFzA
- Had some opendelta issues. Please flash this entire zip this time around, thanks.
- Screen rotation is in settings now.
where are the screen shots for this rom?
Thank you for this rom and one quick question, can't Sync facebook contacts info anymore on the last build?
"Envoyé depuis mon SGH-T999 avec Tapatalk"
Can someone on tmobile verify uploading pictures and video works with this rom in instagram? it may be a kitkat issue with instagram but previously I have gotten a lot of freezes, FC, and reboots while trying to upload video. anybody willing to test this on the latest release?
Dude sorry but are u spamming the threads with the same question?
Sent from my SGH-T999 using xda app-developers app
Anyone have OpenDelta mess up their phone? Every time I booted into recovery it would install the update. Then lost root and my gapps. It was hell trying to get it all back.
Purplezigar said:
Anyone have OpenDelta mess up their phone? Every time I booted into recovery it would install the update. Then lost root and my gapps. It was hell trying to get it all back.
Click to expand...
Click to collapse
I'm using Philz recovery, opendelta updates work as expected. What's your setup?