Related
I have the blue/gray'ish i747 from AT&T. My issue is pretty much what the title states.
I used the guide off galaxys3root.com to root and install CWM, I have attempted using the CWM that you wind up with by following those instructions, flashed an updated CWM, flashed CWM touch, and today installed TWRP.
I've tried CM9 and 10 dailies, kyanROM 1.1 and up, kangs (couple different releases), and pretty much every other ROM I've found on these forums that had a decent thread and regular updates. For all of them I've tried full-wipe, restored the system to stock (as in used Odin to flash the original firmware and kernel and started over), simple flash over my current working (stock but heavily stripped via root uninstaller) ROM, read every post in the forum thread and double/triple-checked the instructions before I even downloaded the files...
I can flash kernels all day long without isses, my personal favorite is kt747, every release has worked on this phone and they keep getting better.
Each time the result is the same: Everything fires right up. CM10 exhibited none of the issues reported in the development thread and is gorgeous... But my phone will not leave HSPA mode for 4g/LTE. Coming from stock, my phone shows 4g, and 4-5 bars; after flashing ANY custom ROM, all I get is an H with a "eh.." signal.
My wife, who will let me change nothing on her phone, so its bone stock, has the same model (in white) on the same account. After flashing any ROM I've found that I wanted to try; I can have mine sitting right next to hers and see that hers is on 4g with a huge signal while mine is on HSPA with half the signal. I've also verified that it isn't just an issue with the indicators by running speedtest.net on both phones. Hers consistently clocks in at significantly higher download rates (2x or better) and slightly higher upload rates.
I'm pretty much at a loss here, I've flashed a few different ROMs to my old HTC Merge and a Motorola Electrify and while there was some variance in average signal strength I never had a problem like this (of course they're both 3g phones, so its not really comparable). So I'm not even really certain what information I could provide that might assist in troubleshooting.
Anyone have any ideas on where I can start looking or what I can do about this? Pleasse save me from the touchwiz! Barring the 4g issue, I loved cm10 so much I used it for two days and just tried to get over the loss of 4g. Its so much faster and cleaner and more feature-laden, that it was hard to go back.
Dial *06#and check your imei number.
I got lte on smartguys rom
Sent from my SAMSUNG-SGH-I747 using xda premium
---------- Post added at 08:18 PM ---------- Previous post was at 08:17 PM ----------
mrhaley30705 said:
Dial *06#and check your imei number.
Click to expand...
Click to collapse
Mine says invalid lol:banghead:
Sent from my SAMSUNG-SGH-I747 using xda premium
mrhaley30705 said:
Dial *06#and check your imei number.
Click to expand...
Click to collapse
I get "connection problem or invalid mmi code" on the stock Rom gimme a few to backup and flash something else and I'll report back.
Edit:
Same error message in current cm10 daily
So what do I do about that? I'm assuming that's not a desired result?
You obviously did not read about the imei problem. next time you should read. You you need to receive your imei number back you can find how to in the development thread
Sent from my htc_jewel
Urinophoria said:
I get "connection problem or invalid mmi code" on the stock Rom gimme a few to backup and flash something else and I'll report back.
Edit:
Same error message in current cm10 daily
So what do I do about that? I'm assuming that's not a desired result?
Click to expand...
Click to collapse
Scratch that, did some googling for that error code. apparently it works if I put in *#06# instead of *06#
So, since I hadn't t restored my backup yet, I ran it on the CM10 daily and it came back with a code. do you need the code (not sure if IMEI is one of those "don't post it in public places" things or not.
*Just restored the backup-the code is different on stock. It is the same 15-digit numerical sequence but also has " / 02" (minus the quotes) appended to it.
So, clearly there's a difference, is there a way to edit/change/fix it in the custom roms?
is your imei missing, or saying unavailable.... just post the first 5 digits if its there...
http://forum.xda-developers.com/showthread.php?t=1801997
this is how to fix the issue
I'll make it easy. If it DOESN'T start with 35, yourIMEI is borked
BNaughty said:
is your imei missing, or saying unavailable.... just post the first 5 digits if its there...
Click to expand...
Click to collapse
35309
Shows up identical on both stock and custom ROMs, but on stock there is the / 02 at the end.
So I'm assuming, if its IMEI, its a syntax issue.
Gonne go check out Andrew's link and see if that fixes it too.
Thanks for the resource.
Urinophoria said:
35309
Shows up identical on both stock and custom ROMs, but on stock there is the / 02 at the end.
So I'm assuming, if its IMEI, its a syntax issue.
Gonne go check out Andrew's link and see if that fixes it too.
Thanks for the resource.
Click to expand...
Click to collapse
You seem to have no IMEI issues... are you seleting the LTE apn? That 02 or 05 is not part of your IMEI...
BNaughty said:
You seem to have no IMEI issues... are you seleting the LTE apn? That 02 or 05 is not part of your IMEI...
Click to expand...
Click to collapse
Been reading up on it and it looks like it may be the version number, in the CM10 menus I found IMEI and directly underneath it was V 02, so I'm thinking its just the way the ROM handles the version or something. just weird to me that it comes back with that syntax on one Rom but not the other.
I actually went through galaxys3root.com, verified my apn settings there, made sure they were set up appropriately and that it was selected. In both stock and custom configurations it shows up as AT&T PTA, and was selected in both.
Just to be absolutely sure, yesterday I deleted all of the APNs and (using my wife's gs3) recreated an exact copy of the apn on her phone. So it had no choice but to be on the right one.
Urinophoria said:
Been reading up on it and it looks like it may be the version number, in the CM10 menus I found IMEI and directly underneath it was V 02, so I'm thinking its just the way the ROM handles the version or something. just weird to me that it comes back with that syntax on one Rom but not the other.
I actually went through galaxys3root.com, verified my apn settings there, made sure they were set up appropriately and that it was selected. In both stock and custom configurations it shows up as AT&T PTA, and was selected in both.
Just to be absolutely sure, yesterday I deleted all of the APNs and (using my wife's gs3) recreated an exact copy of the apn on her phone. So it had no choice but to be on the right one.
Click to expand...
Click to collapse
Wow dude, you really aren't listening... your IMEI is fine... the 02 is specific to LEM modem, the 05 for LG1 modem, and I believe 07 for LH1 modem (someone correct me on that one).... you've just narrowed it down to an issue with APN... CM10 has the ability to select the ATT LTE apn... have you tried that?
BNaughty said:
Wow dude, you really aren't listening... your IMEI is fine... the 02 is specific to LEM modem, the 05 for LG1 modem, and I believe 07 for LH1 modem (someone correct me on that one).... you've just narrowed it down to an issue with APN... CM10 has the ability to select the ATT LTE apn... have you tried that?
Click to expand...
Click to collapse
Yep, I said I did in my last post. I even went through and deleted all the apns and rebuilt it line by line to the last comma from th apn on my wife's bone-stock s3
Urinophoria said:
Yep, I said I did in my last post. I even went through and deleted all the apns and rebuilt it line by line to the last comma from th apn on my wife's bone-stock s3
Click to expand...
Click to collapse
Apn was actually the very first thing I tried when I first saw this problem after flashing kyanrom.
Verify your APN settings
NAME ATT LTE
APN pta
Proxy Not Set
Port: Not set
Password Not Set
Server Not Set
MMSC http://mmsc.mobile.att.net
MMS port 80
MCC 310
MNC 410
APN Type default,supl,mms
APN protocol IPv4
Bearer Unspecified
BNaughty said:
Verify your APN settings
NAME ATT LTE
APN pta
Proxy Not Set
Port: Not set
Password Not Set
Server Not Set
MMSC http://mmsc.mobile.att.net
MMS port 80
MCC 310
MNC 410
APN Type default,supl,mms
APN protocol IPv4
Bearer Unspecified
Click to expand...
Click to collapse
Screenshots attached, sorry, uploaded em in reverse order. But unless I'm missing something tiny, its identical to stock.
Urinophoria said:
Screenshots attached
Click to expand...
Click to collapse
That's all correct... I was hoping you wouldn't have to mess with your NV items, that's why I beating down the APN so hard.... Trying to keep it simple... Your IMEI is intact by looking at the 5 digits you posted, and the 02 really does have no effect....
Even though you already done so for all the people who have asked, go ahead and write down your IMEI reported by the phone and make sure it matches the sticker or the box.... Your modem seems to be UCLEM... You could try flashing UCLG1 which will put you on IMEI service 05, heres the modem thread...
but you may need to end up following this post...
also, a flash back to stock is always a troubleshooting option, just to see...
BNaughty said:
That's all correct... I was hoping you wouldn't have to mess with your NV items, that's why I beating down the APN so hard.... Trying to keep it simple... Your IMEI is intact by looking at the 5 digits you posted, and the 02 really does have no effect....
Even though you already done so for all the people who have asked, go ahead and write down your IMEI reported by the phone and make sure it matches the sticker or the box.... Your modem seems to be UCLEM... You could try flashing UCLG1 which will put you on IMEI service 05, heres the modem thread...
but you may need to end up following this post...
also, a flash back to stock is always a troubleshooting option, just to see...
Click to expand...
Click to collapse
kk, thanks for the help. For clarification, is the modem the "Baseband Version" in the menus? That shows I747UCLEM. I'll go through and the read the threads you referenced and report back on the results.
Thanks again man!
Sorry, forgot to mention-yes, the IMEI does match the sticker.
Flashing back the stock ROM has worked every time. I've done that one a few time just to try to eliminate variables.
Hello everyone,
If you're using an SGH-T889V (originally from Vidéotron, Wind or Mobilicity) on a carrier that runs LTE on the AWS band, e.g.: Rogers, Bell, Telus, Fido, Virgin Mobile Canada, Koodo, AT&T or T-Mobile; this will allow you to enable LTE.
Note: Vidéotron has launched their LTE network in September 2014. As of writing this, it is unclear whether there will be a new T889V modem released with LTE enabled in the coming weeks, much like there was with T-Mobile USA when they launched their LTE network.
If you're using a T-Mobile USA SGH-T889, this guide isn't for you.
The usual disclaimers apply.
Actually, let me rephrase that: This mod permanently damages your phone, and irrevocably voids your warranty.
No one has been able to flash back to a T889V modem (be it ALJ4, BMA3, CMK4 or DNE7) without encountering bootloops afterwards.
Interestingly, T889VVLUDNH2 did not bootloop, it simply showed an "unknown" IMEI and baseband with no network connection.
Some background:
A rather lengthy post explaining what I did and what happened
TL;DR version of same
Additional relevant threads:
Getting LTE to work on fido
Need Help Please WIND 889V Borked
You'll need:
LTE - Coverage, known working microSIM, proper plan and system provisioning, etc...
Proper APN settings for your carriers on hand. (Better yet if you're running TouchWiz ROMs: proper CSC files and knowledge on how to modify and apply those.)
ADB
Clockworkmod/TWRP recovery
CWM/TWRP flashable I317M modem image. (I originally used the BMA3 modem, although the mod should work with any of them.)
Bell/Rogers/Telus I317M modem files
I317MVLALJ2 4.1.1 initial release (This one could be of interest for unlock purposes...)
I317MVLBMA3 4.1.2
I317MVLUCMK5 4.3
I317MVLUDNF1 4.4.2
I317MVLUDNF3 4.4.2 (I haven't downloaded the full Odin image and prepared a zip for this one.)
I317MVLUDNH2 4.4.2
Mobilicity/Vidéotron/Wind T889V modem files.
T889VVLALJ4 4.1.1 initial release - CAUTION: flashing this on top of a working ALJ4 modem installation has been known to cause bootloops and NV item corruption.
T889VVLBMA3 4.1.2
T889VVLUCMK4 4.3
T889VVLUDNE7 4.4.2
T889VVLUDNH2 4.4.2
Once you've downloaded the above files:
Backup your NV settings (in CDMA Workshop text format) as per this thread. You can also use the EFS Professional Tool (currently at version 2.1.61) almost identically to the older NV_reader_writer tool. (It also contains the IMEI NV item generator functions that Peoplearmy's tool had, apparently gone missing too.)
The only things I'll add are that:
RMNET + DM + MODEM is not available, you'll have to use RNDIS + DM + MODEM instead.
Finding the COM port can be done in device manager, you may need to refresh devices or disconnect and reconnect the USB port. If it's been properly detected, you can also click the Port text to the left of the droplist, there's an autodetect function there.
Also use this guide to backup (in QPST/QXDM .qcn format): http://forum.xda-developers.com/showthread.php?t=1946915
Optional: Backup the raw mk9efs partitions too, as per @connexion2005's suggestion: http://forum.xda-developers.com/showthread.php?t=2079705 (they're not necessary for the mod itself, and are only made as an additional precaution)
Optional: Backup the raw mk9efs and efs partitions with this CWM or TWRP "flashable" zip based on the Synergyrom team's work. It outputs the dumps in a ready-to-flash restore zip.
Consider backing up other files and data from your phone with the usual complement of Titanium Backup, nandroid and so on. Copy those off the phone.
If you're running an AT&T or T-Mobile ROM: you may have to flash another ROM as well. The stock T889V ROM has a "Network Mode" setting that lets you toggle between LTE/WCDMA/GSM, WCDMA only and GSM only. The I317M and N7105 ROMs also have this, while the I317 and T889 probably don't.
On the T889V ROMs: to see LTE become an option, you'll need to edit your CSC files and remove the <CscFeature_Setting_DisableNetworkMode>lte</CscFeature_Setting_DisableNetworkMode> line in /system/csc/others.xml. This setting is only cosmetic: the notification bar icon will show "4G" and you won't see LTE in the network mode settings. However, the phone will still use LTE, which can be confirmed by looking in Settings / About Phone / Status. (I've come across this while flashing ROMs with unaltered CSC files.)
Let's proceed with the actual modification:
Reboot to recovery, flash the 317M BMA3 modem. Wipe /cache and Dalvik cache for good measure.
Reboot phone. No bootloops? Good.
Check in Settings / About Phone that you still have a valid IMEI. (It's possible you still do at this point.)
Reboot the phone. This time the IMEI and service should be lost.
Using the same procedure you did to back them up, restore your NV items.
Reboot the phone.
Confirm your IMEI is correct and that you have service.
Check in Settings: Wireless and networks -> More settings -> Mobile Networks -> Network Mode that LTE/WCDMA/GSM is selected. Another menu worth mentioning here is the "Band Selection" menu accessed through the *#2263# dialer code. Note that if you force the phone onto the LTE bands, you will only have data service, and no voice calls or SMS.
I'd like to thank the following users for their help and feedback in writing this guide: @Byangmang, @deeznutz1977, @dspkeff, @hkfan, @rail205, @TEKHD
Good luck,
Darkshado
Thank you so much. I have been waiting for this day to come. All the best, Darkshado! :beer:
Sent from my SGH-T889 using xda app-developers app
Works. Thanks allot. Only thing I didn't do is restore the 3 files backed up via adb.
jfive74 said:
Works. Thanks allot. Only thing I didn't do is restore the 3 files backed up via adb.
Click to expand...
Click to collapse
Those are very much a belt and suspenders bit. They're not to be restored in the instructions, and my inclusion here is mostly because connexion2005 had requested a set for a JTAG repair. I'm taking a guess here, but if there's any calibration data or other phone specific parameters in there, having those from your device on hand can't be bad.
What if I suffer boot loops, didn't do any backups, and my IMEI is already Zeroed out on my T889V? How can I fix this?
I have my IMEI still since it's written on the purchase box of the phone.
I used to be wind, now virgin mobile with LTE sim. I flashed tmobile modem. No love. Flashed T889V modem back, then got boot loops.
Please help!!!
edit:
Hi Darkshado, really hoping you can help.
I've done more reading. I can't seem to make the boot loops stop.
I've done odin to factory rom image. No luck.
I tried i317 custom modem you have here on XDA, no luck. Also Tmobile modem, etc... no luck.
I used CWM and permission fix, etc.. no luck.
My boot loop is a little weird. It will boot and stay live (working - no signal though) for about a min, then it will say some android.media.process is not responding and reboot.
So I can't get NV to inject my IMEI as it will reboot too soon. From what I read, NV needs 5-10 min??
basically, I did JEDIX-15 tmobile rom install with latest tmobile modem. That's how I got into this mess. I have a T889V and virgin LTE sim such as yourself.
I just can't seem to make the boot loops end so I can move forward....
Try writing flashing back the T889 baseband and restoring a T889 or T889V NV items backup.
http://www.mediafire.com/download/p5025pxtp9vgk4k/NV_items.7z
Will this do?
T889UVBMD1
from: http://forum.xda-developers.com/showthread.php?t=2102380
I'm going to try and odin the factory image and see if that stops the reboots.
I'm guessing baseband is the same as modem correct?
I'll go give it a try now and use CWM to inject it first before I odin.
I've never done an NV restore let alone backup, so that seems to be my hick up. I'll do some research and get that done then and get back to you.
Thanks for the assistance.
edit:
I'll try to write NV, but that might be an issue since I need the phone not to reboot, and it does in under a minute usually.
Any suggestions, or specific rom I can try to write so I can eliminate the reboots so I can do the nv?
edit2:
ok, the tmo modem from that link above worked. It's not boot looping after a min now!
There is still zero signal. Does not connect. When I do *#2263# and choose automatic, it says menu does not exist, etc...
going to to try inject my IMEI with NV.
Will report back.
Edit 3
Ok, just used nv read/write to inject your t889v nv file. Then generated my imei and injected that.
reboot, and got signal! yay.
thank you so much!\
When I go to settings. I only see WCDMA/GSM/AUTO. No LTE option. I think I read somewhere that is cosmetic?
If I NV write the T889 NV file from deeznutz1977 will that fix it cosmetically?
Thanks again!
Darkshado said:
Try writing flashing back the T889 baseband and restoring a T889 or T889V NV items backup.
http://www.mediafire.com/download/p5025pxtp9vgk4k/NV_items.7z
Click to expand...
Click to collapse
20% More Awsomeness
I switched over to Telus sine Mobilicity is going under . I could only get HSPA+ @ 5Mbps, Now I too have fully working LTE. Albeit with weaker signal strenth due to higher band freqency. But I can just toogle LTE when needed. I must admit that second reboot with IMIE 0 and no service was a bit nerve racking, but the backup was flawless. Thanks a million OP. ^_^
i edited the csc called other....
and the LTE line was already not present.
The LTE option is still not in the mobile settings however.
When I do the *#2263# menu and set it to LTE the data does keep working. And I do see it in the system info. Also using a tmobile radio with the JEDI-X15 rom. yay.
But I'd like to solve the cosmetics side of it.
I did inject the t889V nv setting.... could that affect it? Would the t889 NV settings fix it?
edit:
still no luck getting LTE option to appear, although it works, I'd like to solve the cosmetic side of it.
Any help?
You can also get confirmation that LTE is active by checking in About phone / Status.
I don't feel like going through the 664 pages of the Jedi X ROM thread to see if they've altered the network icons or not. Being based on the N7105 ROMs icons with either "4G" or "LTE" captions should be present. Are you editing the active CSC files? Namely those in /system/csc/ ?
I should mention that some CSC edits only apply upon factory reset, e.g. activating WB-AMR, (a.k.a. HD Voice). One neat trick is to make a backup in recovery (nandroid or TWRP), factory reset, then reboot to recovery and restore the backup. I don't recall if this applies to the network icon related lines or not.
Older Modems
Question?
As I stated before it was a smooth transition. But... Some claim the older modem worked better (I317M-I317MVLALJ2). I tried through TWRP as before but the return status says FAILED. No changers are thus made. Any ideas? Thanks.
I've been able to flash back and forth between ALJ2 and BMA3. You're saying the linked ALJ2 zip refuses to flash? I'll have to check, but this might take a few days as I'm:
-rather busy IRL
-stuck using my old laptop (mushy, thoroughly worn out keyboard with an overzealous enter key that fires the moment you hint at touching it and a dead left shift key) while the other is in warranty repair (failing PSU seems to have damaged the motherboard and/or dGPU)
Goodbye,
Darkshado
Darkshado said:
You can also get confirmation that LTE is active by checking in About phone / Status.
I don't feel like going through the 664 pages of the Jedi X ROM thread to see if they've altered the network icons or not. Being based on the N7105 ROMs icons with either "4G" or "LTE" captions should be present. Are you editing the active CSC files? Namely those in /system/csc/ ?
I should mention that some CSC edits only apply upon factory reset, e.g. activating WB-AMR, (a.k.a. HD Voice). One neat trick is to make a backup in recovery (nandroid or TWRP), factory reset, then reboot to recovery and restore the backup. I don't recall if this applies to the network icon related lines or not.
Click to expand...
Click to collapse
yep, I edited those CSC files as per your original write up.
I did not factory reset. And yes, you are right. A good example is the Nexus 4. It needs a factory reset to keep the LTE settings ( unless you go to the "INFO" menu, and then you need to reset again.
Okay, I'll try the reset tonight. See what happens. And yes, I see LTE in system info.
Also, when I use speedtest, it records it as lte.
Honestly, I'm just happy it works again...
Darkshado said:
I've been able to flash back and forth between ALJ2 and BMA3. You're saying the linked ALJ2 zip refuses to flash? I'll have to check, but this might take a few days as I'm:
-rather busy IRL
-stuck using my old laptop (mushy, thoroughly worn out keyboard with an overzealous enter key that fires the moment you hint at touching it and a dead left shift key) while the other is in warranty repair (failing PSU seems to have damaged the motherboard and/or dGPU)
Goodbye,
Darkshado
Click to expand...
Click to collapse
Problem Solved. The issue was I am using SDCard encryption. For some reason TWRP can SEE the cards files, but not use them. When I moved the modem to internal it installed fine. Sorry bout that.
If I enable lte using this method then will aws still works for WindMobile?
Sent from my SGH-T889 using Tapatalk 2
hkfan said:
If I enable lte using this method then will aws still works for WindMobile?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Probably Not? There are threads of people trying to get there i317 to work with AWS. http://forum.xda-developers.com/showthread.php?t=2068041
Then again this is a t989v. Don't risk it unless your prepared to not go back.
hkfan said:
If I enable LTE using this method then will AWS HSPA still work for WindMobile?
Click to expand...
Click to collapse
It should. My data in this department is very limited, since I don't have an active Videotron account on hand. With that said, I got a working speed test on Videotron's AWS HSPA shortly after sorting my phone out this winter. (I simply dropped by one of their stores while at a shopping mall and nicely asked a sales rep to borrow an active SIM card. Showed her the menu unlock method as a thank you.)
I also got to use the phone with T-Mobile USA earlier this year, getting both HSPA (some of it likely AWS, though I didn't get the time to check) and LTE.
@Darkshado thank you very much for the T889VVLUDNE7 modem. I just flash the zip in cwm and it work perfect for my Videotron T889V.
Thanks for putting this together!!
Quick question - I have a t889v from Wind Mobile. I switched carriers to Rogers, and in the process screwed up my phone and had no IMEI/Baseband. Had to send it in for repair to replace the board. It came back with the baseband T889UVUCMK7.
Do you think I can still use this method? I'm currently running a T-mobile Touchwiz 4.4.2 ROM (Test Rom v1.2).
What does download mode give as product ID? You may well have a U.S. board in there now.
The later T-Mobile T889 basebands support LTE out of the box. Make sure your APN settings, plan and SIM card are correct, and that the modem you have does support LTE; if not, you might just need to update that.
I know some people here followed essentially the steps I did, but with the T889 modem instead, but I don't think it applies here.
Good luck,
Darkshado
Sent from my T0LTE using XDA Free mobile app
Is it possible to unlock the LG-LS970 without tearing the phone apart and soldering a sim card in it? Or atleast get a prepaid plan with it? It use to be a sprint contract phone.
ErraticFox said:
Is it possible to unlock the LG-LS970 without tearing the phone apart and soldering a sim card in it? Or atleast get a prepaid plan with it? It use to be a sprint contract phone.
Click to expand...
Click to collapse
I'm not quite sure this is what you want, but:
Root and unlock is here. http://forum.xda-developers.com/showthread.php?t=2050582
If you want to do the sim card mod go here. http://forum.xda-developers.com/showthread.php?t=2043604
As for the prepaid plan I'll let you search for that one
ErraticFox said:
Is it possible to unlock the LG-LS970 without tearing the phone apart and soldering a sim card in it? Or atleast get a prepaid plan with it? It use to be a sprint contract phone.
Click to expand...
Click to collapse
You can flash the phone to change the nv settings and allow use of it on a prepaid network such as Cricket or Metro PCS There are other networks as well such as Ting (I think you don't even need to flash to use Ting) https://ting.com/byod
I was wanting it on StraightTalk. I've seen people have this done while searching but I cannot find out how to do it. I'd like to do this without having to sodder anything.
ErraticFox said:
I was wanting it on StraightTalk. I've seen people have this done while searching but I cannot find out how to do it. I'd like to do this without having to sodder anything.
Click to expand...
Click to collapse
Go here http://www.straighttalk.com/wps/portal/home/h/byop/registration
You can proceed with registering your CDMA phone to Straight Talk. I tried with mine (Lg Optimus G) and it went through but I didn't want to go very far because I do not want to actually register my phone to ST.
I have just purchased an LG OG that seems to have been flashed to Page Plus Wireless while the seller said it was ready for sprint activation, any idea on what I need to do to revert back to sprint?
bran2113 said:
I have just purchased an LG OG that seems to have been flashed to Page Plus Wireless while the seller said it was ready for sprint activation, any idea on what I need to do to revert back to sprint?
Click to expand...
Click to collapse
Might need to be flashed back depending on how the NV items are held. I flashed an HTC evo once to cricket and when I did a hard reset the flash went away. You can try a factory reset through recovery.
But first I would check the esn to see if it will even be accepted on sprint. A lot of times phones get flashed because they have a bad esn with sprint..
check it here.
http://swappa.com/esn
Thanks for the reply. I purchased the phone via swappa and it passes their ESN checks, I also called Sprint customer service and they also verified that the ESN is clean. However the chat representative claimed that it must still be active on some other carrier.
I have also used kitty wireless's meid check and it comes back as active_with_ppc and has what i assume is the old owners phone number. Any ideas? Is it as simple as flashing the correct stock rom/radio/prl and then going through the Sprint activation process?
Sent from my LG-LS970 using XDA Free mobile app
bran2113 said:
Thanks for the reply. I purchased the phone via swappa and it passes their ESN checks, I also called Sprint customer service and they also verified that the ESN is clean. However the chat representative claimed that it must still be active on some other carrier.
I have also used kitty wireless's meid check and it comes back as active_with_ppc and has what i assume is the old owners phone number. Any ideas? Is it as simple as flashing the correct stock rom/radio/prl and then going through the Sprint activation process?
Sent from my LG-LS970 using XDA Free mobile app
Click to expand...
Click to collapse
Glad the ESN is good for you.
I think the issue you might have is that it is still active with another carrier. You can try to run through the process of flashing it using qpst. I think the settings for the other carrier are still there.
First try to flash the radio and prl and add it to your Sprint account. But like I mentioned, Sprint doesn't like when the phone is still active on any network, you may have to contact the buyer to remove the phone from their account.
Is the phone rooted? What ROM is on it? What does it list for Radio and PRL now?
dopy25 said:
Glad the ESN is good for you.
I think the issue you might have is that it is still active with another carrier. You can try to run through the process of flashing it using qpst. I think the settings for the other carrier are still there.
First try to flash the radio and prl and add it to your Sprint account. But like I mentioned, Sprint doesn't like when the phone is still active on any network, you may have to contact the buyer to remove the phone from their account.
Is the phone rooted? What ROM is on it? What does it list for Radio and PRL now?
Click to expand...
Click to collapse
Phone is rooted, and came with stocktimus. The seller also left several other roms and backups, as well as pageplus prls on the device's storage . The current prl is 44018, although the network is listed as Chameleon in the settings.
Baseband: M9615A-CEFWMAZM-2.0 1690
Kernal:3.4.0
Buildnumber:Stocktimus_0_v1
Software:LS970ZVC
If there is other info that might help please let me know. Im new to LG devices and the last device I have modified was a moto atrix.
Sent from my LG-LS970 using XDA Free mobile app
bran2113 said:
Phone is rooted, and came with stocktimus. The seller also left several other roms and backups, as well as pageplus prls on the device's storage . The current prl is 44018, although the network is listed as Chameleon in the settings.
Baseband: M9615A-CEFWMAZM-2.0 1690
Kernal:3.4.0
Buildnumber:Stocktimus_0_v1
Software:LS970ZVC
If there is other info that might help please let me know. Im new to LG devices and the last device I have modified was a moto atrix.
Sent from my LG-LS970 using XDA Free mobile app
Click to expand...
Click to collapse
Try to flash the ZVC radio and do a reset on the phone. Looks like you might need to flash some files using QPST. Also since you are on a stockish rom try to update the PRL within system updates. It might pick up the current Sprint PRL of 25019, that should help with activation. I don't know if it will pick it up since you are not on Sprint at the moment but it's worth a shot.
If that doesn't work, find a way to flash a newer Sprint PRL with QPST (I don't think you'll find 25019 on the net yet) then try to update it on the phone.
You might try some of these codes too to see if you can do some NV changes, seems like the one for network reset or clear OTA provision might do the trick, I stongly suggest you make a full backup including an EFS backup first before doing anything.
http://forum.xda-developers.com/showthread.php?t=2052816
Here is the thread to create an EFS backup, do not use the zero EFS. The Optimus_G_Create_Flashable_EFSv4 zip will create a flashable recovery of your EFS (the EFS holds you ESN and other good stuff to make the phone work)
http://forum.xda-developers.com/showthread.php?t=2161498
dopy25 said:
Try to flash the ZVC radio and do a reset on the phone. Looks like you might need to flash some files using QPST. Also since you are on a stockish rom try to update the PRL within system updates. It might pick up the current Sprint PRL of 25019, that should help with activation. I don't know if it will pick it up since you are not on Sprint at the moment but it's worth a shot.
If that doesn't work, find a way to flash a newer Sprint PRL with QPST (I don't think you'll find 25019 on the net yet) then try to update it on the phone.
You might try some of these codes too to see if you can do some NV changes, seems like the one for network reset or clear OTA provision might do the trick, I stongly suggest you make a full backup including an EFS backup first before doing anything.
http://forum.xda-developers.com/showthread.php?t=2052816
Here is the thread to create an EFS backup, do not use the zero EFS. The Optimus_G_Create_Flashable_EFSv4 zip will create a flashable recovery of your EFS (the EFS holds you ESN and other good stuff to make the phone work)
http://forum.xda-developers.com/showthread.php?t=2161498
Click to expand...
Click to collapse
Looks like the phone is still registered on Page Plus, I had KittyWireless run an ESN check and the MEID came back registered to another number and the status is ACTIVE_ON_PPC. Looks like I'm going to have to return it unless I can get the original owner to cancel their Page Plus account.
Flashed the ZVC.bin, phone rebooted and after conneting the USB it rebooted again to a black screen. Hard brick I am unable to boot into fastboot or download mode. Any fix besides JTAG?
Could anybody who has flashed their ls-970 to Cricket take a second out and tell me how they activated it on Cricket? I see services online that will flash my phone to Cricket for $10, but Cricket staff said there is no way to activate a phone without a sim card. So how did any of you sign up to Cricket with your flashed phone without a sim card if Cricket says it can not be done?
Hi everyone, so here it go's, ive been working with android devices all the way from my first android device(phone) the THE FAMOUS DROID X, since then on to a Motorola Xoom, Been theming and messing about with Linux OS's.
I purchased a Sprint LG G2 not really looking into the device because ive always depended on XDA and its entire community to come out with a hot fix, anyways I have Cricket Service and didnt realize the SIM had to be unlocked to work on other SIM cards, Since the stock ROM wouldnt let me on the Cricket Nework I downloaded and installed CM11, after installing messing around with Mobile Settings and such I got the Text (not mms) and Talk working however without data, so i knew the APNs werent working correctly, to make this short, I took the APNs from my moms Galaxy s4 (sold by Cricket) so the 4g worked on her phone, the attached files i put in the system/etc folder after that went into the settings networks selected 3g, and then added APN now when entering APN (access point names) i just entered in name and apn and saved it, then went back in and edited the rest and here are the screen shots
"[https://docs.google.com/file/d/0BzDugtIyKzTZNWZBRDFMLTFTZHM"]
LGMONO said:
Hi everyone, so here it go's, ive been working with android devices all the way from my first android device(phone) the THE FAMOUS DROID X, since then on to a Motorola Xoom, Been theming and messing about with Linux OS's.
I purchased a Sprint LG G2 not really looking into the device because ive always depended on XDA and its entire community to come out with a hot fix, anyways I have Cricket Service and didnt realize the SIM had to be unlocked to work on other SIM cards, Since the stock ROM wouldnt let me on the Cricket Nework I downloaded and installed CM11, after installing messing around with Mobile Settings and such I got the Text (not mms) and Talk working however without data, so i knew the APNs werent working correctly, to make this short, I took the APNs from my moms Galaxy s4 (sold by Cricket) so the 4g worked on her phone, the attached files i put in the system/etc folder after that went into the settings networks selected 3g, and then added APN now when entering APN (access point names) i just entered in name and apn and saved it, then went back in and edited the rest and here are the screen shots
"[https://docs.google.com/file/d/0BzDugtIyKzTZNWZBRDFMLTFTZHM"]
Click to expand...
Click to collapse
Do your mms work now?
donutkidd said:
Do your mms work now?
Click to expand...
Click to collapse
Yes using go sms thiugh I'm not a fan of silly apps like that as long as u program in the mmsc mms proxy and mms port in go sms it does work good both pictures and group messages I'm looking into finding out how cricket installs they android messaging app so far I'm running into a verification issue when trying to open the android messaging.apk I havent seen a fix on here for cricketwireless services regarding mms I know its installed as a user app however there are setting they input which I don't know. And for the abovr apn conf file I shared above is not needed just configure ur apn I am on a t mobile port right now which is just what I like. No mods or anything it runs flawlessly
LGMONO said:
Yes using go sms thiugh I'm not a fan of silly apps like that as long as u program in the mmsc mms proxy and mms port in go sms it does work good both pictures and group messages I'm looking into finding out how cricket installs they android messaging app so far I'm running into a verification issue when trying to open the android messaging.apk I havent seen a fix on here for cricketwireless services regarding mms I know its installed as a user app however there are setting they input which I don't know. And for the abovr apn conf file I shared above is not needed just configure ur apn I am on a t mobile port right now which is just what I like. No mods or anything it runs flawlessly
Click to expand...
Click to collapse
are you using a cricket sim card? or any sim card for that matter?
i am having trouble getting internet 3g to stick with my ls980 flashed to cricket.
Yes 60 bucks and even after the cricket sales guy said I'll never be able to get my LG on the cricket network I still proceeded to register the phone and paid the 60 bucks also I made a new post in general discussion I figured out the APN to get your stock messenger to send and recieve mms so my LG g2 is fully working
3rdcoasttx said:
are you using a cricket sim card? or any sim card for that matter?
i am having trouble getting internet 3g to stick with my ls980 flashed to cricket.
Click to expand...
Click to collapse
If your on a stock sprint zvc or latest kitkit i was unsuccessful get the apn to stick thats why i have the t mobile port rom also i installed the port from cloudyg3 which is the g3 rom and i successfully installed and configured apn with mms and data i would hightly recommend removing the ls980 sprint rom and install a t moble port or the new cloudyg3 rom these u can set the apns and they will work
LGMONO said:
If your on a stock sprint zvc or latest kitkit i was unsuccessful get the apn to stick thats why i have the t mobile port rom also i installed the port from cloudyg3 which is the g3 rom and i successfully installed and configured apn with mms and data i would hightly recommend removing the ls980 sprint rom and install a t moble port or the new cloudyg3 rom these u can set the apns and they will work
Click to expand...
Click to collapse
did you leave the sprint sim in or do you have a cricket sim card? downloading cloudy rom now! lol tired of this 1x disconnect bs
3rdcoasttx said:
did you leave the sprint sim in or do you have a cricket sim card? downloading cloudy rom now! lol tired of this 1x disconnect bs
Click to expand...
Click to collapse
Remove the sprint sim left side use a pin to pop open install cricket sim if ur on a sprint rom u will get unknown sim card detected no need to flash the sim is the flash just install a flex rom t mobile rom or the new cloudyg3 set ur apn and ur good
LGMONO said:
Remove the sprint sim left side use a pin to pop open install cricket sim if ur on a sprint rom u will get unknown sim card detected no need to flash the sim is the flash just install a flex rom t mobile rom or the new cloudyg3 set ur apn and ur good
Click to expand...
Click to collapse
ahhh.., and if i dont have a cricket sim? i am still on cricket cdma over here
3rdcoasttx said:
ahhh.., and if i dont have a cricket sim? i am still on cricket cdma over here
Click to expand...
Click to collapse
I was told by cricket (this was yesterday not when i first bought the SIM) i didnt need the SIM however i believe that would make it more difficult for flashing meaning diag mode plus cdma workshop and manually updating prl ect ect i prefer the SIM never have to worry about flashing roms and re flashing phone or using tot for complete restore SIM holds the network no matter what
guess i am going get a cricket sim card.. the flashing part wasnt bad.. but this sim card is a killer,, i had same problem with droid x i believe.. getting data to work and stick ugh.. thanks for all your help and everything
3rdcoasttx said:
guess i am going get a cricket sim card.. the flashing part wasnt bad.. but this sim card is a killer,, i had same problem with droid x i believe.. getting data to work and stick ugh.. thanks for all your help and everything
Click to expand...
Click to collapse
well the SIM it self only cost 10 bucks but the service and activation was 50 bucks. i think that includes registering the phone as well. i hope everything works out for you,
when i bought the g2 i really didnt know nothing about it, once i bought it and found out it had a LOCKED SIM, i went right to XDA for a quick work around. after configuring the phone and APNs very happy with the results for my g2(ls980)
LGMONO said:
well the SIM it self only cost 10 bucks but the service and activation was 50 bucks. i think that includes registering the phone as well. i hope everything works out for you,
when i bought the g2 i really didnt know nothing about it, once i bought it and found out it had a LOCKED SIM, i went right to XDA for a quick work around. after configuring the phone and APNs very happy with the results for my g2(ls980)
Click to expand...
Click to collapse
thanks for all your help and i hope you are around tonight,. i picked up my cricketsim card today and plan to mess with it tonight.. just a few more questions for you
do you flash over the lg980 to sprint? i flashed it so cricket was working on a cdma, and i am thinking about going back to stock, but ill lose my flash
did you do simunlocker or anything? or just pop it in and viola?
3rdcoasttx said:
thanks for all your help and i hope you are around tonight,. i picked up my cricketsim card today and plan to mess with it tonight.. just a few more questions for you
do you flash over the lg980 to sprint? i flashed it so cricket was working on a cdma, and i am thinking about going back to stock, but ill lose my flash
did you do simunlocker or anything? or just pop it in and viola?
Click to expand...
Click to collapse
I dont believe there is a simunlocker out there for sprint all the code unlockers, what ur seeing is for your MSL code, pay 1.99 and youll get the MSL code
sorry for the late response maybe u could help me to id like the sprint rom stock but i haven't figured out a way to get the apns sticking on zvc, however to install a t mobile (ported version for ls980) rom or any other, first root the device, with ioroot25, then install a custom recovery twrp with autorec in the play store, after reboot into recovery use trwp app in the play store, once in recovery go to wipe and wipe system,data (NOT INTERNAL DATA) davik, and cache locate the rom zip, and install, make sure you have the latest firmware installed first which is i believe 4.4.2, zvc. also the devs add a link to the whitelines fix which you will need
LGMONO said:
I dont believe there is a simunlocker out there for sprint all the code unlockers, what ur seeing is for your MSL code, pay 1.99 and youll get the MSL code
sorry for the late response maybe u could help me to id like the sprint rom stock but i haven't figured out a way to get the apns sticking on zvc, however to install a t mobile (ported version for ls980) rom or any other, first root the device, with ioroot25, then install a custom recovery twrp with autorec in the play store, after reboot into recovery use trwp app in the play store, once in recovery go to wipe and wipe system,data (NOT INTERNAL DATA) davik, and cache locate the rom zip, and install, make sure you have the latest firmware installed first which is i believe 4.4.2, zvc. also the devs add a link to the whitelines fix which you will need
Click to expand...
Click to collapse
i am with you on the stock rom thing.. it has great features.. from what i have read, you have to take an apns-conf.xml file and put it in /system/etc
that is suppose to get the apns to stick, but i havent gotten to test it out yet.. just got home, about to flash back to stock and try out this sim card..
also, there is a sim unlocker that is suppose to unlock all lg g2
3rdcoasttx said:
i am with you on the stock rom thing.. it has great features.. from what i have read, you have to take an apns-conf.xml file and put it in /system/etc
that is suppose to get the apns to stick, but i havent gotten to test it out yet.. just got home, about to flash back to stock and try out this sim card..
also, there is a sim unlocker that is suppose to unlock all lg g2
Click to expand...
Click to collapse
i think im gonna reinstall a sprint rom and test it out ive been learning quite a bit about flashing and apns prl's me and my wife are going to run an ad to flash phones to cricket for say 20 bucks but i want more knowledge first i dont wanna be messing up peoples devices lol . Ive ran other roms and there loaded to the T with settings, and ucountless tweaks and from what i have noticed, stock roms run smooth and wont brick the phone, i had a optimous g that had the optimums DE 5 rom and some how my 4 year old son adjusted the cpu clock way way to high before i realized it the phone was smoked lol so i try and use roms that dont have that option to over clock, besides this phone is fast enough without over clocking it
LGMONO said:
i think im gonna reinstall a sprint rom and test it out ive been learning quite a bit about flashing and apns prl's me and my wife are going to run an ad to flash phones to cricket for say 20 bucks but i want more knowledge first i dont wanna be messing up peoples devices lol . Ive ran other roms and there loaded to the T with settings, and ucountless tweaks and from what i have noticed, stock roms run smooth and wont brick the phone, i had a optimous g that had the optimums DE 5 rom and some how my 4 year old son adjusted the cpu clock way way to high before i realized it the phone was smoked lol so i try and use roms that dont have that option to over clock, besides this phone is fast enough without over clocking it
Click to expand...
Click to collapse
if youre looking to do a lot of them, you should look at cdma workshop.. automatic flashing for a lot of funs, 75$ a month subscription
so i got my sim in and this lg g2 still says no sim card....
you know even weirder thing, anytime i flash a non stock based rom, it bootloops.. Paranoid android, cm11,.. they do not boot up
3rdcoasttx said:
if youre looking to do a lot of them, you should look at cdma workshop.. automatic flashing for a lot of funs, 75$ a month subscription
so i got my sim in and this lg g2 still says no sim card....
you know even weirder thing, anytime i flash a non stock based rom, it bootloops.. Paranoid android, cm11,.. they do not boot up
Click to expand...
Click to collapse
u many need to flash modem firmware cm11 not sure i believe it works off fireware zv8 not sure
also flash gapps
heres a list for modems {{http://forum.xda-developers.com/showthread.php?t=2451426}} without the {{}}
try flashing zv8 first modem if that doesnt work try another that was my first issue flashing cm11
LGMONO said:
also flash gapps
heres a list for modems {{http://forum.xda-developers.com/showthread.php?t=2451426}} without the {{}}
try flashing zv8 first modem if that doesnt work try another that was my first issue flashing cm11
Click to expand...
Click to collapse
honestly, i am not sure how you did this.. you sure you have a ls980? from what i have read, you can not put a us gsm carrier on a sprint phone..only international
Hello
I have a Rogers S3 i747.
I messed up my phone during a cynogen update and after working at it for a long time, my phone is now working,
however the data keeps cutting in and out and sometimes i cant send messages or recieve them, also cant make phone calls sometimes.
I need a FULL NV back up from another Rogers S3 i747 that has not been rooted.
**I DONT NEED YOUR IMEI, you can delete that**
*if you can help me, but not sure how, here is the link to the instructions, http://forum.xda-developers.com/showthread.php?t=1804117
i appreciate the help, thank you.
-ilya
Is your imei missing?
Not sure that an NV restore would solve the problems. Does your bootloader match your modem?
audit13 said:
Is your imei missing?
Not sure that an NV restore would solve the problems. Does your bootloader match your modem?
Click to expand...
Click to collapse
-yes i have the correct bootloader (ending with MK5) which is for the canadian i747, i have the latest bootloader and latest stock image.
-initially after the cynogen update, only WiFi worked, and i found my IMEI and NV was missing, and i never made a back up
-so i used the tools and instructions provided on previous threads, and input my IMEI. and then my WIFI and EDGE worked, but i didn't have any 3G or 4G or LTE
-then i used my dads galaxy S3 (from a FIDO network), used his full NV and put it into my phone, and wrote in my original IMEI.
-now everything works, except when my data and carrier connections cut out. its on and off through out the day.
-so i believe that if i can get an original NV full back up of another ROGERS S3 that has not been altered, then i should have everything working without cutting out.:good:
First thing, no one is allowed to post that here. It can potentially be used to help clone stolen devices and as such, is against forum rules.
Second thing, there may be another way to address this. I will PM you in a few to give you another option.
Sent from my SAMSUNG-SGH-I747 using Tapatalk