Super jelly bean problem - Xperia Arc Q&A, Help & Troubleshooting

as i am having a laggy rom and random reboots therefore i searched a bit and many says it's a kernel problem therefore i wanted to change my kernel . I'm running lupus v12 720p jernel and i want to change to super fusion but the problem is i earlier when installing rom flashed super fusion first but i couldn't go into recovery mode therefore i had to flash lupus kernel in order to install rom but i want to use super fusion :crying:
Sent from my Xperia Arc S using XDA Premium 4 mobile app

Just flash the fusion kernel via fastboot, then install WiFi modules via Recovery and you're good. No need to reinstall the ROM.

but i can't boot into recovery with superfusion that's the problem

Just checked - Super Fusion kernel has WiFi modules built in. So just flash the kernel and start up the phone.

i flashed the kernel but i can't boot into recovery mode . i tried every button

dhruvkhatkar said:
i flashed the kernel but i can't boot into recovery mode . i tried every button
Click to expand...
Click to collapse
And why do you need to go in there? You had flashed the ROM previously with the Lupus kernel. No need to reinstall the ROM or wipe anything.

thanks but it means that superfusion can't boot into recovery or my phone has some problem?

Probably the kernel, but you got the ROM installed already, but I still can't see, why would you need recovery in the first place.

I don't and thanks for help
Sent from my Xperia Arc S using XDA Premium 4 mobile app

Related

[Q] How to reboot into recovery mode?

Hello everybody,
I managed to install the clockworkmod recovery for the Xperia play.
But I don't know how to reboot into recovery mode.
I searched a lot but I can't find the key combination for rebooting into fastboot/bootloader
or recovery mode.
Please help.
Turn device off. When off, press the power button, and start tapping the back button untill device boots into recovery.
Sent from my R800i using Tapatalk
Thanks. But unfortinatly thats does not work.
The device just booted up normally.
May be there is another method or I am doing somthing wrong?
ZeCoder said:
Thanks. But unfortinatly thats does not work.
The device just booted up normally.
May be there is another method or I am doing somthing wrong?
Click to expand...
Click to collapse
I see you posted in the CWM thread, did you boot the recoveryPLAY.img? if so you dont have CWM installed, thats a temp image, your ment to boot from fastboot every time you want to use recovery. You need to flash a kernel with recovery embedded, if your using a r800i with the latest firmware, try doomlords kernel.
AndroHero said:
I see you posted in the CWM thread, did you boot the recoveryPLAY.img? if so you dont have CWM installed, thats a temp image, your ment to boot from fastboot every time you want to use recovery. You need to flash a kernel with recovery embedded, if your using a r800i with the latest firmware, try doomlords kernel.
Click to expand...
Click to collapse
Thank you very much.
I thought that it is permanent.
Thanks again.
ZeCoder said:
Thank you very much.
I thought that it is permanent.
Thanks again.
Click to expand...
Click to collapse
What is it, unlike other android device, on the play recovery is held on /boot partition. This is the same partition as the kernel. So if you was to just flash a recovery, this would overwrite /boot partiton, and because there would be no kernel, the device wouldnt boot. So kernel and recovery have to be combined into one boot.img.
That recoveryPLAY.img, NEVER FLASH IT, alway boot it. If you flash it, it will corrupt your /boot partition.
AndroHero said:
I see you posted in the CWM thread, did you boot the recoveryPLAY.img? if so you dont have CWM installed, thats a temp image, your ment to boot from fastboot every time you want to use recovery. You need to flash a kernel with recovery embedded, if your using a r800i with the latest firmware, try doomlords kernel.
Click to expand...
Click to collapse
Hey erm....I have the same problem as him but i don't understand what you are saying. Can you please please please explain to me what to do???
maksiitis said:
..................
Click to expand...
Click to collapse
doomlord/keiren = tap back button
cm7/cm9/ICX/MIUI = tap the vol down button
I'm so glad I found this post. It was really useful. Also felt good using the search and actually finding what I need.
I can't flash Clockworkmod recovery with ROM manager
I can't flash Clockworkmod recovery with ROM manager.
It says me that I have to install a Clockworkmod based recovery manually.
How can I do it?
As they said u should boot custom kernel (like eg. Doomkernel) to have recovery. I think there is no cwm for play working with stock kernel, or maybe is but it cant be booted.
Sent using r800i with DoomKernel v11 (1.21ghz)
What's a kernel and what i have to do?
Hi, I've just rooted my Play and installed CWM using this app:
https://play.google.com/store/apps/...251bGwsMSwyLDEsImNvbS5wdnkuQ1dNaW5zdGFsZXIiXQ..
I've installed CWM with no issues (or so the app says) but I can't boot into Recovery. There's an option in the app to reboot into recovery; but all that does it reboot the device normally (except that there's no boot animation). Also tried tapping back continuously during boot and volume down but still nothing.
Is this going to be a kernel issue? If so how should I go about getting the appropriate kernel on my phone?
As the says in description: reboot phone and when it shows sony ericsson logo u should wait for blue led and than start pressing any key an it should boot to recovery
Sent using r800i with DoomKernel v11 (1.21ghz)
Trism said:
Hi, I've just rooted my Play and installed CWM using this app:
https://play.google.com/store/apps/...251bGwsMSwyLDEsImNvbS5wdnkuQ1dNaW5zdGFsZXIiXQ..
I've installed CWM with no issues (or so the app says) but I can't boot into Recovery. There's an option in the app to reboot into recovery; but all that does it reboot the device normally (except that there's no boot animation). Also tried tapping back continuously during boot and volume down but still nothing.
Is this going to be a kernel issue? If so how should I go about getting the appropriate kernel on my phone?
Click to expand...
Click to collapse
Use the app to install cwm again. It doesn't always take the first time.
Sent from my R800x using XDA
nachovilagraca said:
What's a kernel and what i have to do?
Click to expand...
Click to collapse
Kernel is a part of phone system which is connecting rom with hardware (i think) there is some custom kernels which is usually (always?) prerooted and has builtin recovery. With custom one u can eg. Overclock and/or undervolt ur cpu
U need to find one here on xda and than boot it using fastboot - in kernel's thread should be said how to do it.
Sent using r800i with DoomKernel v11 (1.21ghz)
ch3mn3y said:
Kernel is a part of phone system which is connecting rom with hardware (i think) there is some custom kernels which is usually (always?) prerooted and has builtin recovery. With custom one u can eg. Overclock and/or undervolt ur cpu
U need to find one here on xda and than boot it using fastboot - in kernel's thread should be said how to do it.
Sent using r800i with DoomKernel v11 (1.21ghz)
Click to expand...
Click to collapse
Great info.
nachovilagraca said:
I can't flash Clockworkmod recovery with ROM manager.
It says me that I have to install a Clockworkmod based recovery manually.
How can I do it?
Click to expand...
Click to collapse
you need to install custom kernel such as doomlord,lupus,mjolnir,fxperia
nachovilagraca said:
I can't flash Clockworkmod recovery with ROM manager.
It says me that I have to install a Clockworkmod based recovery manually.
How can I do it?
Click to expand...
Click to collapse
you need to flash custom kernel which provide cwm..
flash one of them in fastboot mode.
you can choose doomlord, keiran, cm7, cm9, icx, miui, mjolnir and else
There is an app on the Google Play store called Xperia CWM Auto Installer. It automatically installs CWM.
Sent from my R800x using xda premium

[Q] Racing Bean help (Arc S)

Hi everyone!
I tried to install racing bean 3.0 and, after the kernel screen, it appears the "X" logo. It get stuck on this screen with the "X"!
How can i solve this problem? I don't want to lose my arc s again...:crying:
Thanks for the help :fingers-crossed:
Contact dev. Of ROM
Sent from my mighty Xperia Arc S
flash the v2.2
then flash v3.0 without a wipe then will start our phone
even me got the same issue and i cant find v2,0
but i found v3.0.1 and may give it a try and see what happens
Flashed stock kernel
Now i have flashed the ICS stock kernel and i am unable to get my phone to CWM recovery. After the sony logo appears, there's a black screen.
My PC find the phone, but it's in MTP mode, therefore i can't flash anything except the kernel (.ftf).
Do i have to change the internal memory?
DrMorph said:
Now i have flashed the ICS stock kernel and i am unable to get my phone to CWM recovery.
Click to expand...
Click to collapse
You won't be able to until you flash a kernel with CWM or use X-Parts. Click the first link in my sig and read it from start to finish, when you have a better understanding of what you're doing then try and flash something.
DrMorph said:
Now i have flashed the ICS stock kernel and i am unable to get my phone to CWM recovery. After the sony logo appears, there's a black screen.
My PC find the phone, but it's in MTP mode, therefore i can't flash anything except the kernel (.ftf).
Do i have to change the internal memory?
Click to expand...
Click to collapse
You shouldn't flash an ICS kernel, but a jb kernel
http://www.mediafire.com/?4765e8vuuo8qv#303na39mj3lcr
schlager P. said:
You shouldn't flash an ICS kernel, but a jb kernel
http://www.mediafire.com/?4765e8vuuo8qv#303na39mj3lcr
Click to expand...
Click to collapse
I solved this problem time ago. When i posted this thread i was a beginner with roms and stuff, but now i've learned alot and i'm creating my own rom right now
Thanks anyway for the answers

[Q] not booting into system after CWM

hi guys
i installed a CWM loader on the xperia arc and flashed xperia ultimate HD
after installing it i clicked reboot but it keeps going back into CWM
then i booted into TWRP recovery and rebooted from there but goes back into CWM recovery
please help it is urgent its not my phone its my cousins
Someone please reply fast it's really urgent
Sent from my
evil muffins
darkshadow246 said:
hi guys
i installed a CWM loader on the xperia arc and flashed xperia ultimate HD
after installing it i clicked reboot but it keeps going back into CWM
then i booted into TWRP recovery and rebooted from there but goes back into CWM recovery
please help it is urgent its not my phone its my cousins
Click to expand...
Click to collapse
Did you flash the correct kernel?
I got the same problem after I flashed wrong kernel on my tablet.
Flash a stock kernel with CWM, then flash the ROM and flash one of the few recommended kernels stated on the developer's ROM thread.
僕のLT18iから送られてきた
popthosegaskets said:
Did you flash the correct kernel?
I got the same problem after I flashed wrong kernel on my tablet.
Flash a stock kernel with CWM, then flash the ROM and flash one of the few recommended kernels stated on the developer's ROM thread.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Problem fixed
I know nothing about xperia arc coz I own galaxy y
Can someone recommend a good kernel
Lupus makes contacts and messaging fc
Sent from my
evil muffins
darkshadow246 said:
Problem fixed
I know nothing about xperia arc coz I own galaxy y
Can someone recommend a good kernel
Lupus makes contacts and messaging fc
Sent from my
evil muffins
Click to expand...
Click to collapse
Check the ROM thread, there should be a recommended list of kernels.
僕のLT18iから送られてきた

HELP xperia play kernel bootloops and freezes

hello there my names kyle and im new here but you can call me sangy, anyway i have joined the site to post this
i have had my play now for 6 months and i want ics and a new kernel, i heard lupus was the best one so i flashed lupus using fastboot and the correct rom. i have followed all steps correctly and the dam thing just boot loops after 1 min of booting unless i have my usb in my pc at which point the phone will stay on like it should without a single bootloop. so with a potentially bricked phone i flashed the stock firmware back v4.0.2.A.0.58 and re flashed a different kernel and rom still the same issue so i flashed back to stock again. if anyone can tell me how to solve this weird ass issue i will rate you +1 because im getting sick of having no cwm and incompatibilities with apps and i want to overclock
ps im planning on flashing doomkernel v14 hope this problem is gone but i know it will have the same issue.
my phones current state is this
xperia play r800i
stock kernel(2.6.32.9-perf) [email protected]#1
FW 4.0.2.A.0.58
baseband 64
android 2.3.4 ginger bread with root and unlocked boot loader
thats everything i know thanks for reading and helping in advance
edit: sorry if im not been precise but by boot loop i mean hot boot where the phone will run fine for 3 min then freeze and reboot on its own until i pull the battery or plug in usb in pc upon hard reset it even does this in kernel boot up
vampyregaming said:
hello there my names kyle and im new here but you can call me sangy, anyway i have joined the site to post this
i have had my play now for 6 months and i want ics and a new kernel, i heard lupus was the best one so i flashed lupus using fastboot and the correct rom. i have followed all steps correctly and the dam thing just boot loops after 1 min of booting unless i have my usb in my pc at which point the phone will stay on like it should without a single bootloop. so with a potentially bricked phone i flashed the stock firmware back v4.0.2.A.0.58 and re flashed a different kernel and rom still the same issue so i flashed back to stock again. if anyone can tell me how to solve this weird ass issue i will rate you +1 because im getting sick of having no cwm and incompatibilities with apps and i want to overclock
ps im planning on flashing doomkernel v14 hope this problem is gone but i know it will have the same issue.
my phones current state is this
xperia play r800i
stock kernel(2.6.32.9-perf) [email protected]#1
FW 4.0.2.A.0.58
baseband 64
android 2.3.4 ginger bread with root and unlocked boot loader
thats everything i know thanks for reading and helping in advance
edit: sorry if im not been precise but by boot loop i mean hot boot where the phone will run fine for 3 min then freeze and reboot on its own until i pull the battery or plug in usb in pc upon hard reset it even does this in kernel boot up
Click to expand...
Click to collapse
which lupus kernel, ics+gb v7 or lupus ics beta v12. have you tried flashing through flashtool because it always works for me and which ics rom as their are tons.
hello thanks for the quick reply
ive tryed the lupus ics+gb kernel latest version with the ics beta rom for xperia play and ive also tryed the lupus gb kernel latest version
and yes i have flash tool and all the drivers but a nice reccomendation on what to flash next based on my phones spec at the moment would be nice
also why am i the only person on the internet with this problem? ive heard of having 60+ apps on the sd to cuase hot booting but for me this is just out of the ordinare, particulary when ive whiped all the phone and flashed a new kernel.
vampyregaming said:
hello thanks for the quick reply
ive tryed the lupus ics+gb kernel latest version with the ics beta rom for xperia play and ive also tryed the lupus gb kernel latest version
and yes i have flash tool and all the drivers but a nice reccomendation on what to flash next based on my phones spec at the moment would be nice
also why am i the only person on the internet with this problem? ive heard of having 60+ apps on the sd to cuase hot booting but for me this is just out of the ordinare, particulary when ive whiped all the phone and flashed a new kernel.
Click to expand...
Click to collapse
With Lupus kernel, use R800i_4.0.2.A.0.79 firmware
will be flashing that stock firmware now over my other one then put lupus gb+ics over the stock kernel
will let you know if it goes well and fixes this
unfortunatly it did not fix it rom loads up, gets to the regular sony setup then freezes and hot boots. did this with lupus kernel ics+gb and the 4.0.A.0.79 firmware you linked me to. its either the kernel or my phone
just tryed doomkernel v14 with your FW kernel still crashes and reboots, is there something i have to do in flashtool because
every kernel ive flashed yet has the same issue.
note i can get a catlog app whilst it is plugged in then unplug it and wait for the crash and send it to you and you can see where its going wrong with the kernel and tell me what to do
thanks for reading these updates and sorry its taking this long to find and fix a big bug :good:
vampyregaming said:
unfortunatly it did not fix it rom loads up, gets to the regular sony setup then freezes and hot boots. did this with lupus kernel ics+gb and the 4.0.A.0.79 firmware you linked me to. its either the kernel or my phone
Click to expand...
Click to collapse
Did you tried any other ics/gb rom? Wipe your system/data from recovery before installing (and by installing i mean install from recovery with "install zip from sdcard")
Ps: maybe its stupid question, but is your sdcard full??? How much free space on it?
what recovery? this is an xperia play they dont have a recovery on stock kernels thats why im flashing one and no my sd card is not full
literally after i flash the kernal and boot up it will freeze and hot boot. the rom doesent factor in this. ive tryed 4 kernels so far the one that comes with cyanogen mod 9 and the 3 mentioned above
would flashtool logs be helpful if so tell me how to record them to a clipboard and you can see whats going on during the flash
vampyregaming said:
what recovery? this is an xperia play they dont have a recovery on stock kernels thats why im flashing one and no my sd card is not full
literally after i flash the kernal and boot up it will freeze and hot boot. the rom doesent factor in this. ive tryed 4 kernels so far the one that comes with cyanogen mod 9 and the 3 mentioned above
would flashtool logs be helpful if so tell me how to record them to a clipboard and you can see whats going on during the flash
Click to expand...
Click to collapse
For Lupus kernel - when powering on, keep pressing volume down for clockworkmod recovery or volume up for TWRP recovery.
Flash ROM from recovery that match kernel. Lupus ICS/GB V7 is for ics/gb roms based on stock (Sony) roms. Read in ROM's thread which kernel is recommended
With flashtool you can only flash .img files and in Xperia Play case, that is ONLY ics beta rom (but almoust all kernels come in .img format - so Flashtool is used to flash kernel). From recovery you can flash every other rom that you can find (just make sure that kernel match rom or else you'll get kernel bootloop)
ok this will be crystal clear
i can flash the kernal but even when booting the kernal and going into recovery to even flash a rom it will freeze and hot boot
meaning i did everything correctly with flashtool to do the kernel and with just the kernel installed (no rom) it still freezes and hot boots
as soon as i can stop these kernels from freezing i can flash whatever ics or gb there is in recovery
note: what are your settings for your flashtool as i might be missing a setting also the info from flashtool says at startup to disable MTP for 2011 devices, would this be my problem?
vampyregaming said:
ok this will be crystal clear
i can flash the kernal but even when booting the kernal and going into recovery to even flash a rom it will freeze and hot boot
meaning i did everything correctly with flashtool to do the kernel and with just the kernel installed (no rom) it still freezes and hot boots
as soon as i can stop these kernels from freezing i can flash whatever ics or gb there is in recovery
note: what are your settings for your flashtool as i might be missing a setting also the info from flashtool says at startup to disable MTP for 2011 devices, would this be my problem?
Click to expand...
Click to collapse
what kernel are you trying to flash? Be specific!
What rom are you trying to flash?
Disconnect phone from PC after you flashed your rom (any one, first boot must be done while disconnected)
the kernel i would like mostly is the lupus kernel
i can flash every kernel no problems, its the fact that the kernel crashes etc i can also flash the correct rom using flashtool the same thing happens
the case im trying to make is that you first install the kernel then flash your rom in recovery then the extras like wifi modules to the kernel
the kernel (dosent matter which one i try for my device ) has the hot boot issue happen to it no matter what i do before i even have a chance to install the rom(again the correct rom stock or not).
and yes i know you have to wait for boot ups on new roms and kernels, this isnt the first time i have flashed roms as i have a galaxy tab 2 running cm10 for the most part.
again thanks for the quick replys but i think this will require more technical solutions or debugging with my phone or software.
Install cwm on your phone. Search xparts on play store. Go into recovery and wipe system and wipe data and cache then turn off your phone. Open flashtool. Hold search while plugging your phone in and then flash kernel
Sent from my LT30p using XDA Premium 4 mobile app
FaiselW said:
Install cwm on your phone. Search xparts on play store. Go into recovery and wipe system and wipe data and cache then turn off your phone. Open flashtool. Hold search while plugging your phone in and then flash kernel
Sent from my LT30p using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thank you for for saying that after 1 hour, will try that now and test the kernel for 20 - 5 min
if this works tell the kernel devs to make proper instructions on this
FaiselW said:
Install cwm on your phone. Search xparts on play store. Go into recovery and wipe system and wipe data and cache then turn off your phone. Open flashtool. Hold search while plugging your phone in and then flash kernel
Sent from my LT30p using XDA Premium 4 mobile app
Click to expand...
Click to collapse
did these exact instructions but the new xparts dosent work so luckily the community had the older version that works,
followed everything buy the book installed cwm using xparts after root went into recovery, wipe data factory reset, wipe cache partition and i even wiped the dalvik cache, flashed the lupus ics+gb kernel booted into the custom lupus recovery (scrolled through the menu a minute) then as expected kernel crash followed by hot boot
any other ideas?
vampyregaming said:
did these exact instructions but the new xparts dosent work so luckily the community had the older version that works,
followed everything buy the book installed cwm using xparts after root went into recovery, wipe data factory reset, wipe cache partition and i even wiped the dalvik cache, flashed the lupus ics+gb kernel booted into the custom lupus recovery (scrolled through the menu a minute) then as expected kernel crash followed by hot boot
any other ideas?
Click to expand...
Click to collapse
Fully working steps:
-download eraser.zip in attachment, unpack it somewhere in pc
-Start flashtool, enter flash mode, hold back button on phone, connect to pc and flash .79 firmware. DO NOT BOOT INTO ROM!
-Disconnect phone and connect again in fastboot mode (hold search button while plugging it back)
-Flash Lupus ICS/Gb 480p or 720p kernel
-While still in fastboot mode, double-click file name "start.bat" from where you unpacked file in attachment.
-Disconnect phone, power on and keep pressing volume down untill you enter recovery
-Install rom and reboot
Bakisha said:
Fully working steps:
-download eraser.zip in attachment, unpack it somewhere in pc
-Start flashtool, enter flash mode, hold back button on phone, connect to pc and flash .79 firmware. DO NOT BOOT INTO ROM!
-Disconnect phone and connect again in fastboot mode (hold search button while plugging it back)
-Flash Lupus ICS/Gb 480p or 720p kernel
-While still in fastboot mode, double-click file name "start.bat" from where you unpacked file in attachment.
-Disconnect phone, power on and keep pressing volume down untill you enter recovery
-Install rom and reboot
Click to expand...
Click to collapse
will try this now hope this one works as were running out of solutions will post again in half hour
Bakisha said:
Fully working steps:
-download eraser.zip in attachment, unpack it somewhere in pc
-Start flashtool, enter flash mode, hold back button on phone, connect to pc and flash .79 firmware. DO NOT BOOT INTO ROM!
-Disconnect phone and connect again in fastboot mode (hold search button while plugging it back)
-Flash Lupus ICS/Gb 480p or 720p kernel
-While still in fastboot mode, double-click file name "start.bat" from where you unpacked file in attachment.
-Disconnect phone, power on and keep pressing volume down untill you enter recovery
-Install rom and reboot
Click to expand...
Click to collapse
followed the instructions to the word kernel still crashes in lupus recovery
vampyregaming said:
followed the instructions to the word kernel still crashes in lupus recovery
Click to expand...
Click to collapse
I don't know what you mean by "kernel still crashed in lupus recovery". In wich step you get that?
Try pressing volume up when powering on to enter twrp recovery

Using my xperia play again need some advice with cwm

Hello, I smashed my razr @ work so I'm back on my xperia play as a backup for a bit. But I can't seem to boot into jb pa or cm9 from this cwm http://forum.xda-developers.com/showthread.php?t=1493996. Am I just using an incompatible cwm recovery?
cj360 said:
Hello, I smashed my razr @ work so I'm back on my xperia play as a backup for a bit. But I can't seem to boot into jb pa or cm9 from this cwm http://forum.xda-developers.com/showthread.php?t=1493996. Am I just using an incompatible cwm recovery?
Click to expand...
Click to collapse
Is that just cwm recovery? Or is it a kernel with cwm recovery?
What was last kernel you flashed before you flashed that cwm recovery image?
If you have boot.img in zip file of your (jb pa or cm9) rom, extract it and flash in fastboot mode. It should have both kernel and recovery in it. I can't recall wich button is used to enter it, just try vol-,vol+, back or R button after powering phone on
Bakisha said:
Is that just cwm recovery? Or is it a kernel with cwm recovery?
What was last kernel you flashed before you flashed that cwm recovery image?
If you have boot.img in zip file of your (jb pa or cm9) rom, extract it and flash in fastboot mode. It should have both kernel and recovery in it. I can't recall wich button is used to enter it, just try vol-,vol+, back or R button after powering phone on
Click to expand...
Click to collapse
just hold the search button while connecting to pc and you should be able to enter fastboot, if blue led is on you're good to go...then you flash whatever kernel you like with flashtool, and you're ready to flash your choosen rom according to its instruction..i' ve been for a couple of years on super jellybean 8, wich is good jb rom but lacks touchpads support; i'm currently on nexplay wich is an ics rom and it's perfect for me, full touchpad support and good gaming and overall performance..well at least for 2011 hardware...
cj360 said:
Hello, I smashed my razr @ work so I'm back on my xperia play as a backup for a bit. But I can't seem to boot into jb pa or cm9 from this cwm http://forum.xda-developers.com/showthread.php?t=1493996. Am I just using an incompatible cwm recovery?
Click to expand...
Click to collapse
Thread closed on OP's request

Categories

Resources