[Q] TWRP to CWM - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

I did read the "similar threads" and read them.
I am wondering If I wanted to replace TWRP with CWM what is the exact process. Also is there a way to have a dual recovery so you can choose which one you want to use?

electrojas said:
I did read the "similar threads" and read them.
I am wondering If I wanted to replace TWRP with CWM what is the exact process. Also is there a way to have a dual recovery so you can choose which one you want to use?
Click to expand...
Click to collapse
You can over write TWRP with CWM by flashing CWM with ROM Manager. Or Terminal Emulator. You can not use 2 at the same time because recovery resides in a specific memory slot that can only contain 1. There is nothing stopping you from quickly flashing back to whichever recovery you want though. These instructions will show you a way to switch back and forth at will. It works for both TWRP and CWM. You just need the appropriate recovery.img. http://forum.xda-developers.com/showthread.php?t=2170635

Thank you
BCSC said:
You can over write TWRP with CWM by flashing CWM with ROM Manager. Or Terminal Emulator. You can not use 2 at the same time because recovery resides in a specific memory slot that can only contain 1. There is nothing stopping you from quickly flashing back to whichever recovery you want though. These instructions will show you a way to switch back and forth at will. It works for both TWRP and CWM. You just need the appropriate recovery.img. http://forum.xda-developers.com/showthread.php?t=2170635
Click to expand...
Click to collapse
This is exactly the information that I have been wondering. Thanks for the quick reply and link. Peace.:good:

Keep in mind that backups are specific to the recovery that they are done with. If you backup with CWM you must restore with it also. If your latest is with CWM and then you funk your phone up, TWRP will not help you restore unless you can find a flashable CWM.

Another option?
BCSC said:
You can over write TWRP with CWM by flashing CWM with ROM Manager. Or Terminal Emulator. You can not use 2 at the same time because recovery resides in a specific memory slot that can only contain 1. There is nothing stopping you from quickly flashing back to whichever recovery you want though. These instructions will show you a way to switch back and forth at will. It works for both TWRP and CWM. You just need the appropriate recovery.img. http://forum.xda-developers.com/showthread.php?t=2170635
Click to expand...
Click to collapse
I keep flashing CWM with ROM Manager but TWRP still shows up on my Recovery, and i'm not confident enough to use the Terminal Emulator option. Is there another way to go?

Flash CWM from TWRP. Just make sure you find a version of CWM that is flashable.
Here is a link to the tar version of Philz that I use: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att

PauloScalon said:
I keep flashing CWM with ROM Manager but TWRP still shows up on my Recovery, and i'm not confident enough to use the Terminal Emulator option. Is there another way to go?
Click to expand...
Click to collapse
The terminal method is quite simple and a guarantee to work. You only have to type exactly what you see in the instruction. I understand you may be nervous about using codes to change the inner workings of the ROzm but believe me as long as you type it correctly its not possible for something to go wrong.

Related

[RECOVERY] ClockworkMod Recovery for Galaxy S i9000 (FINAL! SAFE!)

First things first, if you flashed a previous version of Clockwork Recovery using Odin, FLASH BACK TO A STOCK KERNEL. (There's another link in the forum to do this, I can't find it at the moment)
This recovery is *very* safe to use. It does NOT flash your kernel; it is a completely uninvasive recovery method.
How it works: The recovery is packaged as an update.zip that you run from STOCK recovery. The update.zip unpacks Clockwork Recovery onto the ramdisk and restarts recovery. When you reboot, it reverts back to the original, unmodified, stock recovery. So, you will need to keep the recovery on the root of your SD card as an update.zip, and apply the zip every time you want to start Clockwork.
HOWEVER, if you use ROM Manager, all of the recovery installation and management are done for you!
Installation instructions:
Download ROM Manager from the Market.
Flash Recovery.
Choose Galaxy S i9000 as your phone.
Accept the Superuser prompt.
Use ROM Manager to create a Backup.
On the very FIRST boot of Clockwork, you may need to manually select "reinstall packages" if Clockwork does not start. You should only ever have to do this once. It will be automatic from then on.
Watch the backup go!
That's it! This is completely painless and safe! There is no need for Odin anymore to replace the recovery or flash updates!
If you appreciate my work, please buy the Premium version of ROM Manager!
If you can't seem to get ROM Manager off the market, you can get it from my homepage:
http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html
Just installed! Working great!
Installed with ROM manager. Works like a charm! Thanx alot Koush!
works fine
works like a charm
Installed, everything working without problems.
To install roms with clockwork we need roms in *.zip format? Where to get them?
Sent from my GT-I9000 using Tapatalk
Just got my phone
will try it after charging ]
YOU ARE THE MAN
thank you and thanks all Xda devs and members
hmm ... I know this might sound stupid but, acually GSG is my first android phone, though I know how to flash roms with odin and how to apply update.zip and all that but what is the difference between this and ClockworkMod Recovery ?? and does it use the same components as odin ? (I mean CODE, CSC, MODEM and Pit) ?
Stickied. Closing the other one. Not sure why you would start a new thread instead of modifying the old one though...
Thanks Koush your the man. Coming from a htc magic I hate this odin bull
Hmm... did every step and in the first reboot, after using rom manager to create a backup, it was supposed to go to the cloclworkmod recovery screen as mentioned, but instead it goes to the regular recovery screen.
Bug? I'm using the JM1 FW
EDIT: After rebooting my phone and trying to open ROM Manager again, I have some sort of "Recovery Failure" screen with 3 options:
- Recovery mode is broken.
- ROM Manager doesn't reboot.
- Other.
?
Arkymedes said:
Hmm... did every step and in the first reboot, after using rom manager to create a backup, it was supposed to go to the cloclworkmod recovery screen as mentioned, but instead it goes to the regular recovery screen.
Bug? I'm using the JM1 FW
Click to expand...
Click to collapse
Do you already have an update.zip on your internal sdcard? If yes, rename it, and then should boot just fine!
kalpik said:
Do you already have an update.zip on your internal sdcard? If yes, rename it, and then should boot just fine!
Click to expand...
Click to collapse
Ahhh... I guess I'm not very used to this "Internal SD Card" thing... there was the update.zip I used to root the phone there and I only checked my regular External SD.
Everything is fine now, sorry for bothering.
Arkymedes said:
Hmm... did every step and in the first reboot, after using rom manager to create a backup, it was supposed to go to the cloclworkmod recovery screen as mentioned, but instead it goes to the regular recovery screen.
Bug? I'm using the JM1 FW
EDIT: After rebooting my phone and trying to open ROM Manager again, I have some sort of "Recovery Failure" screen with 3 options:
- Recovery mode is broken.
- ROM Manager doesn't reboot.
- Other.
?
Click to expand...
Click to collapse
I had the same issue. Must have been the update.zip, but I didnt remove it, just pressed the other option, went into manual recovery mode, rebooted went into rom manager and backed up my files. Worked a charm
Does this mean there will be no more work on a permanent recovery solution?
I have the Korean version M110S - and it does not have the standard recovery (it is crippled - no apply:update.zip). Is there and abd command to "apply update.zip" ?
May I ask if this work for me using mimocan ext4 fix on the backup/restore?
This may sound stupid, but I'm kinda new to Android modding (SGS is my first droid, moving here from WiMo on SE-X1) and.... What is Clockwork?
So if I ever needed to send this phone in for warranty purposes, I could just flash the backup of my stock ROM in and I should be good to go?
does this method works for captivate and vibrant???
edit: just install/ captivate and vibrant option available.
Rithina said:
May I ask if this work for me using mimocan ext4 fix on the backup/restore?
Click to expand...
Click to collapse
Worked for me with mimocan ext4 fix

Trying to switch from clockwork to RA recovery- wont work

Another noob so please bear with me.
I tried to switch from clockwork to RA through simpleroot, after doing so it threw a lot of error messages at me and rebooted the phone, After that, in Boot menu I went to select "recovery" and it reloaded the boot menu. It simply will not go into recovery mode anymore, and all my attempt to load any of the recovery.img files to the SD, it will continue to not load in into recovery. Please help!
looks like a q & a post but
indephenit said:
Another noob so please bear with me.
I tried to switch from clockwork to RA through simpleroot, after doing so it threw a lot of error messages at me and rebooted the phone, After that, in Boot menu I went to select "recovery" and it reloaded the boot menu. It simply will not go into recovery mode anymore, and all my attempt to load any of the recovery.img files to the SD, it will continue to not load in into recovery. Please help!
Click to expand...
Click to collapse
if your good to go, booting and rooted, get to the market and install rom manager - re-install clockwork mod recovery...
tons of other methods - this seems simple?
lwarranty said:
if your good to go, booting and rooted, get to the market and install rom manager - re-install clockwork mod recovery...
tons of other methods - this seems simple?
Click to expand...
Click to collapse
Yes that seems simple, but what if I want to install RA recovery instead? do I have that option and if so, where would I D/L Ra from?
rom manager will download it, my latest version shows RA 1.7.0.1 as "Flash Alternate Recovery" and install it, you can switch back and fourth, I have the premium version, not sure if the freebie does it, but support them anywoo and send some bucks!
Yes it does allow you to, the free version just doesn't allow you to access the ROM Manager, online ROM list. But it does allow you to hot swap between ROM's on the fly (essentially).
~Jasecloud4
i've gone back and forth between the two using adb to flash the recovery.
Launch adb and run the command below (assuming you are familiar with adb and fully rooted)
flash_image recovery <path-to-recovery-image>
I purchased the premium...
jasecloud4 said:
Yes it does allow you to, the free version just doesn't allow you to access the ROM Manager, online ROM list. But it does allow you to hot swap between ROM's on the fly (essentially).
~Jasecloud4
Click to expand...
Click to collapse
I purchased the premium version right off the bat - good info!
Personally, I use the crap out of it regardless of my adb and shell skills, but on the road, this little ditty is awesome!
"Flash Alternate Recovery" is blacked out and unavailable for selection, am I skipping a step or will I need to purchase the premium version to access this feature to download RA Recovery?
I never used the free version...
indephenit said:
"Flash Alternate Recovery" is blacked out and unavailable for selection, am I skipping a step or will I need to purchase the premium version to access this feature to download RA Recovery?
Click to expand...
Click to collapse
I have the premium version, perhaps more info is on the market? Regardless, I'd pop for it, you won't regret it.
http://gh-pages.clockworkmod.com/ROMManagerManifest/CHANGELOG.txt
Did you install Clockwork recovery first? Then try to switch to RA. The free version works fine for me will let me switch no problem.
Just by chance...
indephenit said:
"Flash Alternate Recovery" is blacked out and unavailable for selection, am I skipping a step or will I need to purchase the premium version to access this feature to download RA Recovery?
Click to expand...
Click to collapse
Does it allow you to flash the ClockworkMod recovery - maybe you spanked root?
lwarranty said:
Does it allow you to flash the ClockworkMod recovery - maybe you spanked root?
Click to expand...
Click to collapse
Flashed Clockwork and now flashing alternate...
Good nuff - it's well worth the bucks if you like to flash on the spot, backup and restore. I can flash till my hearts content, screw the pooch and restore in a heartbeat with all my stuff ready to roll.
How about the reverse question,,, I already have amon recovery image. I have tried to flash the clockwork over but no go. I have tried to installed from the rom manager, no go. I have fixed the permission. any Idea's, I would like to use the rom manager........ Someone Please help!
Search the forum for the RA zip file and just flash it with clockworkmod.
maxcala said:
Search the forum for the RA zip file and just flash it with clockworkmod.
Click to expand...
Click to collapse
Here is the link for RA...there is a .2 version for those with bad blocks but .1 is the norm thus far. ROM manager should include the clockwork for you and once you've switched between the two it is pretty slick for on the fly mashing. Just know that CW has known issues with cleanly wiping...FYI
http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-evo-v1.7.0.1.img
EDIT: There was a recent update to ROM Manager
maxcala said:
Search the forum for the RA zip file and just flash it with clockworkmod.
Click to expand...
Click to collapse
Ummm, no, don't do that, it is a recovery IMAGE not a ROM. Search for the thread for amon_ra's recovery, get the image file, use a terminal shell app from the market to flash the image. The instructions are in the first post of RA's thread.
I have the same problem, I used to be able to flash RA with rom manager, but stopped working for me as well. Even tried new SD card, wiping, nothing seemed to fix it. Now I jus keep the image in the root of my sd card and use the terminal commands. Almost as fast as clockwork, done it enough. Though as of late not use clockwork at all, just ra.
He's trying to go opposite from the OP?
itchy17 said:
How about the reverse question,,, I already have amon recovery image. I have tried to flash the clockwork over but no go. I have tried to installed from the rom manager, no go. I have fixed the permission. any Idea's, I would like to use the rom manager........ Someone Please help!
Click to expand...
Click to collapse
dpilcher said:
Here is the link for RA...there is a .2 version for those with bad blocks but .1 is the norm thus far. ROM manager should include the clockwork for you and once you've switched between the two it is pretty slick for on the fly mashing. Just know that CW has known issues with cleanly wiping...FYI
http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=recovery-RA-evo-v1.7.0.1.img
EDIT: There was a recent update to ROM Manager
Click to expand...
Click to collapse
He's trying to flash clockwork over RA - the OP was trying to install RA over cw...
If this is true - try uninstalling rom manager completely, if your not using it for backups and/or your nandroids aren't located in sdcard/clockworkmod - delete the folder and try to re-install from market. I don't believe nandroid and/or RA save to clockworkmod folder unless you have previously used rom manager?
And I have heard CW doesn't wipe cache or some such properly - never experienced issues to date...
This is true, but the rom manager was installed in my latest rom.. I will completely re-install the rom if needed just give me the order and directions, thank you in advance.
should I install a rom with out a rom manager, install the clockwork then reinstall my current rom????

JB-MR1 Help!

Hi all, I was on AKOP's milestone ROM before trying to flash their newest one. I did not do anything to the kernel or anything by the way.
I'm using ClockworkMod Recovery v6.0.2.7 and I rebooted into recovery and flashed super dark side wipe and then JB-MR1 and then gapps.
I went through the entire start up process with inputting your information and then finally I got into the actual home screen. I clicked around to see how the UI looked and then decided to reboot through the menu.
It was in the rebooting animation icon for at least 30 min before I decided to pull the battery. I want to wipe and start again but my cwm recovery isn't installing anything.
EDIT: The phone still works as I can boot into the phone and use it. I'm trying to reboot now: power button hold>reboot, but its taking ages still...need help on this reboot thanks
Any help here?
EDIT 2: Pretty much phone is "functional" but any method of trying to reboot or reboot into recovery fails
Thanks all!
Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?
8Fishes said:
Check the Md5 hash to make sure it is a good download.
Otherwise it sounds like it is CWM that can be causing issues.
Which version of gapps are you flashing?
Click to expand...
Click to collapse
Checked the Md5 with an app and it matches up perfectly with akop's main website.
I'm running 6.0.2.8 cwm. Is it even possible that its cwm? I used the same version to flash AKOPs new ROM.
and im flashing gapps-jb-20121212-signed.zip
Does it have anything to do with my kernel?
You aren't supposed to use super wipe with cwm 6. That is probably your problem.
meekrawb said:
You aren't supposed to use super wipe with cwm 6. That is probably your problem.
Click to expand...
Click to collapse
Thanks so much for pinpointing the problem! Is there a fix to this?
And is this the recommended method of flashing? (Taken from http://forum.xda-developers.com/showthread.php?t=1926754):
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery
Ostyrion said:
Thanks so much for pinpointing the problem! Is there a fix to this?
Edit:
Pretty sure my phone is bricked now... in a continuous boot up loop... BUT i can still access recovery
Click to expand...
Click to collapse
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.
meekrawb said:
Yes, those are the proper flashing instructions for CWM6.
It sounds like you have a soft brick. I think your best bet is to Odin back to stock. Have a look here:
http://forum.xda-developers.com/showthread.php?t=1858435
Good luck.
Click to expand...
Click to collapse
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?
Ostyrion said:
You sir are a saving grace!
I'll try this at once!!
I have 2 questions though.
1. in regard to kernels. Do i need to do anything (aka change my kernel?) Or is the stock kernel suitable for 4.2.1?
2. If i cant boot into my phone to get to my SD card, how do i download and put files onto my phone?
Click to expand...
Click to collapse
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.
meekrawb said:
Stock kernel is just fine.
Odin will flash the stock OS to your phone from the computer. Make sure to read the Odin directions a few times before trying it because it could hard brick if something goes wrong.
Click to expand...
Click to collapse
I'm trying to read through the thread you gave me but its kinda cluttered and its hard finding exactly where to start...pointers?
From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.
meekrawb said:
From the first post of that thread you will need
1. The prerequisites
-Odin
-Drivers
-Kies(dunno if this is mandatory but I guess it couldn't hurt.)
2. T-Mobile t989 uvlhi stock ROM(Odin)
You will need some type of zip software to extract the files from this.
3. Follow the steps under Installation - Odin installation(skip step 1)
After you get the stock ROM running you can install custom recovery and then flash your custom ROMs.
Click to expand...
Click to collapse
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Edit: Downloaded a root checker. Looks like I need to reroot. Thank you again SOOOOO much!!!
Ostyrion said:
IT WORKS!!!! I LOVE YOU!! THANK YOU SO SO SO SO SO MUCH!!
THANK YOU THANK YOU THANK YOU!!
So now that I'm back on stock ROM, is my phone still rooted? Or do i need to reroot?
Click to expand...
Click to collapse
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.
meekrawb said:
You are welcome. You are now unrooted so you have to download the recovery of your choice to the internal SD card and flash it from the stock recovery. After you reboot back into recovery you can flash a ROM and you will be rooted.
Click to expand...
Click to collapse
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!
Ostyrion said:
So in essence, once i have cwm/twrp on my phone, i have "root"?
Just to check:
1. download cwm recovery
2. via usb put onto phone.
3. reboot into recovery
4. flash cwm
5. restart phone
6. copy AOKP ROM onto phone
7. reboot into recovery
8. flash AOKP ROM?
Again, i cant thank you enough!
Click to expand...
Click to collapse
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).
meekrawb said:
That should do it. You won't be rooted until you install a custom ROM though(they come already rooted).
Click to expand...
Click to collapse
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?
Ostyrion said:
Apparently stock recovery doesn't allow to install via internal SD card so I need odin to flash cwm dont i?
What boxes do i need checked besides the PDA checkbox?
Click to expand...
Click to collapse
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.
meekrawb said:
If you download the flashable zip from the first post here:
http://forum.xda-developers.com/showthread.php?p=30497342
you should be able to flash it from stock recovery. If it doesn't work I will have to look up how to install it with Odin.
Click to expand...
Click to collapse
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?
Ostyrion said:
I actually got cwm 5.0.2.7 on my phone through odin. I just need root now to upgrade it to the most recent version.
I've been seeing busybox paired with superuser.
Do i need busybox? Or can i just flash superuser through cwm recovery 5.0.2.7?
Click to expand...
Click to collapse
Why do you need root? You should be able to just flash the newer cwm zip.
Here is a superuser zip that I used successfully on my t989:
meekrawb said:
Here is a superuser zip that I used successfully on my t989:
Click to expand...
Click to collapse
Thanks for the file!
I downloaded cwm from this site:
http://www.clockworkmod.com/rommanager
but it comes as an img file...and I dont seem to be able to flash that from recovery

[Q] What to do now?

So I have to admit I am pretty overwhelmed but the amount of information. So I wanted to find out from the community what do I do now.
My RAZR my is rooted, boot loader unlocked and on stock KK 4.4.2. I have no idea how to get the customer recovery on my phone the forrest ways as I have seen it many different ways. SO how it it I get TWRP on my device now. Once I do, is that how I install a rom? Will that wipe the stock one?
Easiest way to flash TWRP is through an app called "Flashify," which is found on the Google Play store. Download the correct version (TWRP 2.7.1.0 works well on the KK build) in ZIP format. Save to your phone. Open Flashify, backup your current recovery, and choose the new TWRP to flash. Reboot and see the new recovery.
In the new recovery, perform a full backup, throw it on your computer for safe keeping. There are a select few ROMs that work on the 3.4 kernel that the KK build uses, so if you would like to be opened to all the other ROMs, find the 98.30.1 update and flash it using your favorite method. After you flash back to the update, reinstall TWRP if it is gone, and then have fun.
To flash a ROM, just throw the ZIP file on your phone for your ROM, boot into TWRP and choose to install, and select the file(s) to flash. This does wipe the stock one. Perform a nandroid backup to save it.
xKroniK13x said:
Easiest way to flash TWRP is through an app called "Flashify," which is found on the Google Play store. Download the correct version (TWRP 2.7.1.0 works well on the KK build) in ZIP format. Save to your phone. Open Flashify, backup your current recovery, and choose the new TWRP to flash. Reboot and see the new recovery.
In the new recovery, perform a full backup, throw it on your computer for safe keeping. There are a select few ROMs that work on the 3.4 kernel that the KK build uses, so if you would like to be opened to all the other ROMs, find the 98.30.1 update and flash it using your favorite method. After you flash back to the update, reinstall TWRP if it is gone, and then have fun.
To flash a ROM, just throw the ZIP file on your phone for your ROM, boot into TWRP and choose to install, and select the file(s) to flash. This does wipe the stock one. Perform a nandroid backup to save it.
Click to expand...
Click to collapse
Thanks for this, it makes things much clearer. I noticed in the flashify app that you can flash bot rims. DO I have to do that too? or is it just the recovery that I need to worry about?
nxion said:
Thanks for this, it makes things much clearer. I noticed in the flashify app that you can flash bot rims. DO I have to do that too? or is it just the recovery that I need to worry about?
Click to expand...
Click to collapse
I'm not sure what you're saying, but recovery is the important thing. Just flash ROMs through recovery. Read directions for each ROM before you do so as well. Most require wiping the System partition at the least, but it's best to do a factory reset (via TWRP) before an install. Backup your data with Titanium.
xKroniK13x said:
I'm not sure what you're saying, but recovery is the important thing. Just flash ROMs through recovery. Read directions for each ROM before you do so as well. Most require wiping the System partition at the least, but it's best to do a factory reset (via TWRP) before an install. Backup your data with Titanium.
Click to expand...
Click to collapse
Sorry, I was trying to say in Flasify, there is the option to flash a boot and recovery image. I was asking if I had to do both.
nxion said:
Sorry, I was trying to say in Flasify, there is the option to flash a boot and recovery image. I was asking if I had to do both.
Click to expand...
Click to collapse
Boot image, I believe, is just the logo your phone displays when you first turn it on (think: red M, or after you unlock, the bootloader warning). Just the recovery is the important part.
xKroniK13x said:
Boot image, I believe, is just the logo your phone displays when you first turn it on (think: red M, or after you unlock, the bootloader warning). Just the recovery is the important part.
Click to expand...
Click to collapse
Boot image is linux kernel, do not try to touch it.
Klen2 said:
Boot image is linux kernel, do not try to touch it.
Click to expand...
Click to collapse
Good to know lol. Thank you.

Installing TWRP over CWM?

Hello,
I am wondering if it is possible to install TWRP over top of CWM? When I initially rooted my phone CWM was installed, however to install a new rom I need TWRP. Is this possible?
Thanks,
Skyty said:
Hello,
I am wondering if it is possible to install TWRP over top of CWM? When I initially rooted my phone CWM was installed, however to install a new rom I need TWRP. Is this possible?
Thanks,
Click to expand...
Click to collapse
Yes. It's been a loong time. Best I can recall, I did the following:
1. Flash'd a ZIP of an old TWRP (couldn't find latest in ZIP file)
2. Rebooted into Recovery
3. Used old TWRP to flash IMG file of new TWRP
Just to make sure I understand (as it's been a while since I rooted a phone or done anything like this).
1.) When you say flashed, do you mean in the TWRP app on the screen where you select your phone model?
2.) So if I flash TWRP (in the manner I described above assuming that's what you meant) and reboot into recovery it will overwrite Clockworkmod and then I'll be in TWRP recovery?
3.) If I do this with the most recent TWRP version I'm assuming this step will be unecessary?
My apologies if I misunderstood what you were trying to say! Thanks for taking the time to respond!
Skyty said:
...
1.) When you say flashed, do you mean in the TWRP app on the screen where you select your phone model?
2.) So if I flash TWRP (in the manner I described above assuming that's what you meant) and reboot into recovery it will overwrite Clockworkmod and then I'll be in TWRP recovery?
3.) If I do this with the most recent TWRP version I'm assuming this step will be unecessary?...
Click to expand...
Click to collapse
Quick answers: No, no, and maybe.
It appears that you may be confusing the TWRP app (which is basically useless bloat) with the actual TWRP recovery. You need to find and download the latest TWRP recovery for your device model. If you can find a ZIP of it, great; because CWM can then install TWRP recovery for you (so that when you reboot into recovery, you'll see TWRP instead of CWM). In my case, there was no ZIP available for the latest TWRP; it was available only as an IMG file. An old version of TWRP recovery, however, was and likely still is available in a ZIP file. So use CWM to install that ZIP of older TWRP, which can then install newer TWRP as an IMG file. I'm just a struggling noob myself, but I'm pretty sure CWM is not able to install an IMG file. Good luck!
MrGoodtunes said:
Quick answers: No, no, and maybe.
It appears that you may be confusing the TWRP app (which is basically useless bloat) with the actual TWRP recovery. You need to find and download the latest TWRP recovery for your device model. If you can find a ZIP of it, great; because CWM can then install TWRP recovery for you (so that when you reboot into recovery, you'll see TWRP instead of CWM). In my case, there was no ZIP available for the latest TWRP; it was available only as an IMG file. An old version of TWRP recovery, however, was and likely still is available in a ZIP file. So use CWM to install that ZIP of older TWRP, which can then install newer TWRP as an IMG file. I'm just a struggling noob myself, but I'm pretty sure CWM is not able to install an IMG file. Good luck!
Click to expand...
Click to collapse
Ahhhh, okay that makes sense. I think I follow. Now in another thread you mentioned that if I need to go back and restore I'd use TWRP to flash CWM, hen I can use CWM to recover my old nandroid backups.
A couple final questions. Will I need to do a wipe when I flash the old TWRP zip (side note, do you know a good place to find those)? If I need to go back to CWM is there any place I can find it to flash with TWRP?
Thanks for all your help!
Skyty said:
... if I need to go back and restore I'd use TWRP to flash CWM, hen I can use CWM to recover my old nandroid backups ...
Click to expand...
Click to collapse
Correct. That is IF you can find TWRP and CWM as ZIP files. I used to switch back and forth frequently, but that was years ago. TWRP is so much more useful, I no longer have anything CWM related nor the ZIPs; and can't even find where I got them. I'm pretty sure they were here on XDA. Spent some time searching, no luck. Then I tried Google. The first snippit nail'd it, here:
https://forum.xda-developers.com/galaxy-s4-mini/development/recovery-cwm-twrp-philz-t3182207
Skyty said:
.... Will I need to do a wipe when I flash the old TWRP zip...
Click to expand...
Click to collapse
I never wiped. I seem to recall that when installing to the recovery partition, one of the steps I saw in the log was a wipe or maybe even a reformatting of that partition taking place along the way.
Skyty said:
.... (side note, do you know a good place to find those)? If I need to go back to CWM is there any place I can find it to flash with TWRP?
Click to expand...
Click to collapse
They're both in the link (above).
Skyty said:
.... Thanks for all your help!
Click to expand...
Click to collapse
That's what the [Thanks] button is for, here on xda.
MrGoodtunes said:
Correct. That is IF you can find TWRP and CWM as ZIP files. I used to switch back and forth frequently, but that was years ago. TWRP is so much more useful, I no longer have anything CWM related nor the ZIPs; and can't even find where I got them. I'm pretty sure they were here on XDA. Spent some time searching, no luck. Then I tried Google. The first snippit nail'd it, here:
https://forum.xda-developers.com/galaxy-s4-mini/development/recovery-cwm-twrp-philz-t3182207
Click to expand...
Click to collapse
I appreciate the link, however, I think those zips are for a different model of phone than mine. However, I think I possibly found versions that will work for me... Is there any real way to confirm?
The serranoltexx CWM Zip
https://forum.xda-developers.com/showthread.php?t=2364980&page=99
The serranoltexx TWRP Zip
https://androidfilehost.com/?fid=24052804347768468
However, I'm not 100% certain either of these will work, and I'm not sure how I'd figure that out.
MrGoodtunes said:
That's what the [Thanks] button is for, here on xda.
Click to expand...
Click to collapse
Done!
Skyty said:
... those zips are for a different model of phone ...
Click to expand...
Click to collapse
OMG! You're right, those are for the Value Edition. I completely miss'd the "ve" in them. Sorry.
Skyty said:
... I think I possibly found versions that will work for me..
The serranoltexx CWM Zip
https://forum.xda-developers.com/showthread.php?t=2364980&page=99
The serranoltexx TWRP Zip
https://androidfilehost.com/?fid=24052804347768468 ...
Click to expand...
Click to collapse
I remember using that very CWM zip version 6.0.5.1, so it should work okay. Good find.
I'm not familliar with that particular TWRP zip. It does clearly indicate being for the i9195 model; I'm just not sure about what "open" means at beginning of zip's filename. Still, worth a try. (If it fails, you can more easily find a TAR file of the most recent TWRP and use Odin to install it.)
MrGoodtunes said:
OMG! You're right, those are for the Value Edition. I completely miss'd the "ve" in them. Sorry.
I remember using that very CWM zip version 6.0.5.1, so it should work okay. Good find.
I'm not familliar with that particular TWRP zip. It does clearly indicate being for the i9195 model; I'm just not sure about what "open" means at beginning of zip's filename. Still, worth a try. (If it fails, you can more easily find a TAR file of the most recent TWRP and use Odin to install it.)
Click to expand...
Click to collapse
So, just thought I'd let you know that I'm up and running with LineageOS and I tested reverting back and forth to CWM and TWRP. Eveything seems in working order! I appreciate you help and have clicked the thanks button on your messages! All the best!
Skyty said:
... I tested reverting back and forth to CWM and TWRP. Eveything seems in working order!
Click to expand...
Click to collapse
That's excellent. It's really amazing how much we can do with this little S4mini device; thanks to the work of devs, several of whom are still providing updates. After all there's never been a more powerful device (other than S4mini VE) that weighs under 4 oz.
MrGoodtunes said:
That's excellent. It's really amazing how much we can do with this little S4mini device; thanks to the work of devs, several of whom are still providing updates. After all there's never been a more powerful device (other than S4mini VE) that weighs under 4 oz.
Click to expand...
Click to collapse
Yeah, its amazing! I've been able to breath new life into my old phone, I'm shocked at how well it runs on the S4; not as well as my newer phones, but better than before. Funnily enough, its actually running a newer version of Android than my S8 and S10e haha. Now onto those phones... been trying to get them both rooted but it's looking like a no go haha.

Categories

Resources