Make calls using computer mic/speakers - Galaxy S II Themes and Apps

Is there an app/program that will allow me to answer calls and use my computers microphone and speakers to make the call instead of the phone?

respuesta
RoRo1990 said:
Is there an app/program that will allow me to answer calls and use my computers microphone and speakers to make the call instead of the phone?
Click to expand...
Click to collapse
podrías usar un escritorio remoto.
saludos desde Chile
kokeconce

yes
kokeconce said:
podrías usar un escritorio remoto.
saludos desde Chile
kokeconce
Click to expand...
Click to collapse
Viber or skype.

Related

Realy disable GSM / Telefon on Orbit

Hi,
i have an question.
If i remove my sim card, the telefon the irradiation is realy disable ??
Or can i disable this function?
I put the telefon offline in the commanger.
But is it realy off so there is no irradiation?
sorry for my bad english.
big thanks
bye
When it is turned off by com-manager (to flight mode) it is "really off" No radiation or radio waves to toast your balls
Is it realy so?
If , than big thanks to your answer.
djsven said:
Is it realy so?
If , than big thanks to your answer.
Click to expand...
Click to collapse
Yes it is really so. All jokes apart
So big thanks for your answer,
you shurely can tell me, which autostart services now i can deactivate?
Bye
djsven said:
Hi,
i have an question.
If i remove my sim card, the telefon the irradiation is realy disable ??
Click to expand...
Click to collapse
I'm not sure. Obviously you can't use the phone in an ordinary way, but I allways thought that without a SIM you are still able to call your local emergency hotline, like 911 or 112.
If you don't want radiation (flight mode), I think it is better to disable the telephone function in Comm manager.
Just a curious question. If you're not planning to use the radio of the device why didn't you just buy a normal PDA?
Thats easy to replay.
The orbit is one of the smallest pda of the world and on of the best to.

direct ring at incoming call

hi,
i have seen this problem before here at the forum, but could not find it. i have a htc touch diamond. when i call my mobile number i can see my mobile recieves it, but dont ring, i see he starts up the phone app and then rings, but that takes a few seconds. i know i can kill the sofsware wich shows the picture and the slide bar to pick up, but is there an other way to directly let the mobile ring, and in the time i get my mobile out of my pocket, he starts up the app?
Bart
(dutch: als je nederlands ben, kun je dan aub in nederlands antwoorden? of als je anderen er ook mee wilt helpen, nederlands en engels? vaak begrijp ik dingen n.l. niet goed in het engels.)

[Q] Help me! Miuiv5 XS!

Hello to all! I just put on my miuiv5 XS, everything works great, but I have a (serious) problem. I do not know why but the rom I get the money from the card! : '(I disabled the drive train and I do not pay data roaming calls, messages or internet that I have the unlimited supply. There' s another thing when I turn the phone tells me to insert the pin is in addition to the network sim pin I do divestment and everything works. I live in Italy. Is there anyone who can help me? Thank you.
Sorry for my english!
Novità!Fai clic sulla stella per salvare questa traduzione nella tua fraseologia.
Ignora

[Q] Call drop problem

Hi everyone, i'm new in this forum.
I am writing to you for a problem with my galaxy nexus (update to the last versione stock rom):
It often happens that during a call, it closes by itself for no reason. No error appears, nor anything in particular that you show. Only the call closes by itself. it happens again if I do a call back after a few minutes or even a few seconds, this closes.
Se provo un'altra volta la chiamata non si blocca più e continua fluida come dovrebbe, senza uno schema.
What could it be? hardware or software problem?
thanks to all in advance,
Daniele.
JonoHex said:
Hi everyone, i'm new in this forum.
I am writing to you for a problem with my galaxy nexus (update to the last versione stock rom):
It often happens that during a call, it closes by itself for no reason. No error appears, nor anything in particular that you show. Only the call closes by itself. it happens again if I do a call back after a few minutes or even a few seconds, this closes.
Se provo un'altra volta la chiamata non si blocca più e continua fluida come dovrebbe, senza uno schema.
What could it be? hardware or software problem?
thanks to all in advance,
Daniele.
Click to expand...
Click to collapse
There is a little known SIM-card setting that tells your phone if it should prefer GSM / calls or data if it can't get both.
You might want to try to disable mobile data for some calls to check this. Call your operator if it happens more often if data is on. They can change the setting on a per SIM basis. (This setting is swapped e.g. for "data" SIMs)

Is my Mi Band 4 bricked?

Hi guys,
to make it short, I have a Mi Band 4 since around 2 weeks and I was quiet pleased with it - until now :/
So the Band is locked down and only shows the message: Connect to Mi Fit and update. (There was a new update this week)
The thing is, my smartphone is not linked to the Band right now (it was before) and I'm not able to get a connection.
Mi Fit on the other hand tells me, that the linking failed and I should do a factory reset on the Band - the Band I can not control...
There seems to be nothing I can do with the app nor the Band itself to get the whole thing working again...
Any ideas?
SayWhatTF said:
Hi guys,
to make it short, I have a Mi Band 4 since around 2 weeks and I was quiet pleased with it - until now :/
So the Band is locked down and only shows the message: Connect to Mi Fit and update. (There was a new update this week)
The thing is, my smartphone is not linked to the Band right now (it was before) and I'm not able to get a connection.
Mi Fit on the other hand tells me, that the linking failed and I should do a factory reset on the Band - the Band I can not control...
There seems to be nothing I can do with the app nor the Band itself to get the whole thing working again...
Any ideas?
Click to expand...
Click to collapse
Can you try and unpair the band from the app?
You could try pairing with this modified Mi Fit app. Not sure it'll help, but worth the try.
https://www.freemyband.com/2019/08/mi-band-4-auth-key.html
I had to reset my phone, that's how I lost the pairing.
Maybe the Band still thinks it's paired, but it's not :/
Tried the modded app and just like with the actual app, pairing gets instantly denied.
So the phone at least still finds the band
I've tried a different smartphone as well
When a Mi Band is "stuck", it is usually recommended to let the battery die (to force a reboot) and they try again. But that can take more than a month, battery life is insane.
I've just realized, that I already had a message "connect to mi fit and update" - when FW update process got interrupted. I couldn't do anything on the band and Mi Fit refused to connect to it (pairing was ok though). After I disabled and enabled Bluetooth on the phone, connection was established and FW upgrade luckily finished fine.
Do you have Mi Band paired in phone bluetooth settings? If yes, try to unpair it from there. If not, try to pair it You might try these steps as well. https://www.youtube.com/watch?v=4iQuoSxm4Dk
The last resort would be probably a warranty replacement.
So to finish this topic, I would like to mention that I send it back and already got a new Band.
But thanks to everyone who tried to help me :good:
Everything I tried to pair the Band failed. Playing around in the Bluetooth settings, the Mi Fit app (even the modded one), Gadgetbridge and Mi Band Master. Nothing worked.
I even managed to drain the battery in two days, but that didn’t help either
My pro tip to drain the Mi Band 4 battery really fast:
Place it in your sink and make sure, that a drop of water hits the display every second or so.
This way the display will be activated and kept active for hours!
Happened to me too.. my band dead after the battery empty and can't boot again till now. Anyway i can turn it on again?
Sent from my SM-C115L using Tapatalk
My mi band 4 is stuck on "pair first" and pretty much tried everything can get it connected or restarted. Any ideas what to do?
Nam045 said:
My mi band 4 is stuck on "pair first" and pretty much tried everything can get it connected or restarted. Any ideas what to do?
Click to expand...
Click to collapse
You'll need to be more specific, what exactly did you try and how it started?
_mysiak_ said:
You'll need to be more specific, what exactly did you try and how it started?
Click to expand...
Click to collapse
Hi,
It started about two days ago while my son was playing with the mi band 4. I don't know how he did it and neither does he. As I stated earlier I can only see a green pairing logo inside a circle and at the bottom it states "Pair first" and secondly I can swipe down and and it shows me an orange shield logo with text saying "regulatory" under it, which in turn shows me logos of Europe and Russia and India etc. Besides this I cannot see or view anything else.
At this moment I am trying to drain the battery with water , by having it on slow drip.
---------- Post added at 08:54 PM ---------- Previous post was at 08:44 PM ----------
Nam045 said:
Hi,
It started about two days ago while my son was playing with the mi band 4. I don't know how he did it and neither does he. As I stated earlier I can only see a green pairing logo inside a circle and at the bottom it states "Pair first" and secondly I can swipe down and and it shows me an orange shield logo with text saying "regulatory" under it, which in turn shows me logos of Europe and Russia and India etc. Besides this I cannot see or view anything else.
At this moment I am trying to drain the battery with water , by having it on slow drip.
Click to expand...
Click to collapse
Tried posting pics but forum kept giving error.
---------- Post added at 09:01 PM ---------- Previous post was at 08:54 PM ----------
Nam045 said:
Hi,
It started about two days ago while my son was playing with the mi band 4. I don't know how he did it and neither does he. As I stated earlier I can only see a green pairing logo inside a circle and at the bottom it states "Pair first" and secondly I can swipe down and and it shows me an orange shield logo with text saying "regulatory" under it, which in turn shows me logos of Europe and Russia and India etc. Besides this I cannot see or view anything else.
At this moment I am trying to drain the battery with water , by having it on slow drip.
---------- Post added at 08:54 PM ---------- Previous post was at 08:44 PM ----------
Tried posting pics but forum kept giving error.
Click to expand...
Click to collapse
SOLVED IT. My son reset the device to factory setting., so I managed to get it back by connecting it to MiFit app, but before I was trying to connect to it via direct Bluetooth.
Thanks for your help.
Hi i found a way to get your mi band 4 active again, you have to open mi fit and make a new band , then down in the menu and find update mi band (if your mi band don't work, turn the Bluetooth off and on again), in the update menu said that something is wrong, maybe firmware or resources, then you have to install notify for mi band and find update firmware on tools page, and download the firmware, resources and font, after this my mi band 4 activated again, i just make this xda account to tell my way to you, hope it works...
My Band 4 is also bricked the battery went flat but eventually it was able to be recharged. Now the Band is frozen and not pairing or synchronising with my phone any more and only displaying 2 screen views, one with a green circle with chinese writing and one with a orange shield with chinese writing which when tapped displays the CMIT ID. No matter how many swipes or taps it wont reset. How do I bring it back to life.
Also I same problem I only see the orange shield and the green key to synchronize, there is nothing else
The old phone broke! I don't know how to restore it!
If I try to pair it, it connects but gives an error and says to reset the bracelet to the factory data, but how do I do it?
Nam045 said:
Ciao,
È iniziato circa due giorni fa mentre mio figlio suonava con la mi band 4. Non so come abbia fatto e nemmeno lui. Come ho affermato prima, riesco a vedere solo un logo di abbinamento verde all'interno di un cerchio e in basso dice "Prima coppia" e in secondo luogo posso scorrere verso il basso e mi mostra un logo a scudo arancione con il testo che dice "normativo" sotto di esso, che a sua volta mi mostra i loghi dell'Europa e della Russia e dell'India ecc. Oltre a questo non riesco a vedere o vedere nient'altro.
In questo momento sto cercando di scaricare la batteria con acqua, facendola sgocciolare lentamente.
---------- Post aggiunto alle 20:54 ---------- Post precedente alle 20:44 ----------
Ho provato a postare foto ma il forum continuava a dare errori.
---------- Post aggiunto alle 21:01 ---------- Post precedente alle 20:54 ----------
RISOLTO. Mio figlio ha ripristinato il dispositivo alle impostazioni di fabbrica, quindi sono riuscito a ripristinarlo collegandolo all'app MiFit, ma prima stavo provando a connettermi tramite Bluetooth diretto.
Grazie per l'aiuto.
Click to expand...
Click to collapse
How did you do?
After a long research I found the solution. The thing is that the band is stuck in Pair First screen, so it is impossible to do Factory Reset on it. On the other hand the Zepp Life APP (Mi Fit) do not pair to it saing that you shoud Unpair it first or do a factory reset. Then it is impossible to proceed even using a hammer to open the device. Until now!!!! The trick is that you have to create a new Mi Fit account on Zepp Life app but when it ask you witch country you live YOU MUST CHOOSE UNITED ARAB EMIRATES. Don´t use your real contry because it will not work. Good Luck!

Categories

Resources