Develop Bugs

I screwed up on my f240

I screwed up my f240 signal. What I did was I flashed a E988 stock rom on it and since it was not working well (including not having a signal) I flashed back to f240 stock rom. Now totally no signal. I flashed the baseband f240s several times but still no luck.
Now im running stock f240s with no signal
Did I just bricked my phone?

anyone please?

augus7 said:
I screwed up my f240 signal. What I did was I flashed a E988 stock rom on it and since it was not working well (including not having a signal) I flashed back to f240 stock rom. Now totally no signal. I flashed the baseband f240s several times but still no luck.
Now im running stock f240s with no signal
Did I just bricked my phone?
Click to expand...
Click to collapse
Flash any baseband ... might help
augus7 said:
anyone please?
Click to expand...
Click to collapse
Finger's hot

as mentioned, i flashed all kinds of basebands, non working

augus7 said:
as mentioned, i flashed all kinds of basebands, non working
Click to expand...
Click to collapse
might seem strange but flash telus rom and then stock rom......i remember a thread here mentioning that
EDIT:
here i found the thread
http://forum.xda-developers.com/showthread.php?t=2379532
solution is on 2nd page but i suggest you read the whole thing for a better understanding of solution
tell us your result

I found somewhere in this forum saying that the solution is to download E908 mexico telenor stock rom and flash it back to the original stock rom. it works

[Q] Service Disabled - Optimus G Pro F240L

So I was running on stock, rooted rom. Everything was working well. But I wanted to get rid of the Korean apps.
soI flashed a stock based rom found here:
http://forum.xda-developers.com/showthread.php?t=2462453
Flashing was successful, but my phone no longer reads my sim.
So I went back to stock by following the guide here:
http://forum.xda-developers.com/showthread.php?t=2432476
Again it was successful but my phone does not read my sim anymore.
I tried different working sim, same problem
Tried reflashing. same thing.
Also I noticed it does not show my phone IMEI under phone identity.
Can anyone help me how to fix this, or point me to a guide I could follow?
I'm using a korean F240L
Android Version
4.1.2
Baseband
M9615A-CEFWMAZM-2.0.1628
Kernel
3.4.0
Build JZO54K
Software
F240L 10v
Thank you in advance!

update
I restored my original backup (before flashing the custom rom) thru cwm, it is still showing service disabled.. can anyone help please?

Raimunto said:
update
I restored my original backup (before flashing the custom rom) thru cwm, it is still showing service disabled.. can anyone help please?
Click to expand...
Click to collapse
Any luck in fixing this problem? I'm having the same issue after trying to install Update v5 with Knock On. I tried installing the basebands but most of them will give Service Disabled with Unknown IMEI. But the E988_HK_Final baseband shows the IMEI and Phone Number but has No Service though or very weak signal. Also, it seems like the QRemote also stops working in my case.

Please flash LG F240L Rom (KDZ File), It will work,

Raimunto said:
update
I restored my original backup (before flashing the custom rom) thru cwm, it is still showing service disabled.. can anyone help please?
Click to expand...
Click to collapse
It looks like your EFS partition is corrupted. Did you back it up through Freegee before installing the custom ROM?

Raimunto said:
So I was running on stock, rooted rom. Everything was working well. But I wanted to get rid of the Korean apps.
soI flashed a stock based rom found here:
http://forum.xda-developers.com/showthread.php?t=2462453
Flashing was successful, but my phone no longer reads my sim.
So I went back to stock by following the guide here:
http://forum.xda-developers.com/showthread.php?t=2432476
Again it was successful but my phone does not read my sim anymore.
I tried different working sim, same problem
Tried reflashing. same thing.
Also I noticed it does not show my phone IMEI under phone identity.
Can anyone help me how to fix this, or point me to a guide I could follow?
I'm using a korean F240L
Android Version
4.1.2
Baseband
M9615A-CEFWMAZM-2.0.1628
Kernel
3.4.0
Build JZO54K
Software
F240L 10v
Thank you in advance!
Click to expand...
Click to collapse
I had this happen to me with an e980 out of the box. I ordered it online, and was in the process of adding my apps and customization without ever rooting it or doing anything outside of warranty and all of a sudden I got "Insert a valid sim card". Just happened out of the blue and I only had that phone for 12 hours. It is some rare hardware issue that AT&T couldn't figure out either. I believe it is the sim slot that is malfunctioning because in mine it wouldn't recognize any sim card but my sim cards worked in other phones.
If you have a contract phone, undo root, flash the stock rom, factory reset and call tech support. They replaced mine for free because it was determined to be a hardware issue. Good luck.:silly:

optimus g f180L baseband prob

recently i bought a f180L having stock firmware 4.1.2 than i followed following tutorial symbianize .com/showthread.php?t=1103182
and converted it to e975 and installed ind fw and flashed f180L baseband and also unlocked edge all was ok till here. than i rooted it tried to install
cwmr using rom manager but when i booted the mobile and pressed vol down and power it didnt went to recovery than i pressed vol up and
pressed power here where it stuck with security boot loop so i again flashed the f180L orig fw and here when problem started as there was
NO SIGNAL. now i read many threads here in xda also tried many firmwares also installed ics 4.0.4 no signal but when i installed a 18mb update
for ics 4.0.4 using built in updater full signal came back but when i switched off the phone and turn it on again there,s no signal also installed
open europe 10h firmware the phone shows weak signals and some time no signal. i have tried many basebands using cwmr too but still no
signal. now i totally fedup and tired i think i made a mistake by not taking efs backup with original firmware. what should i do now ?

open this file and view the read me text
newtown2k12 said:
recently i bought a f180L having stock firmware 4.1.2 than i followed following tutorial symbianize .com/showthread.php?t=1103182
and converted it to e975 and installed ind fw and flashed f180L baseband and also unlocked edge all was ok till here. than i rooted it tried to install
cwmr using rom manager but when i booted the mobile and pressed vol down and power it didnt went to recovery than i pressed vol up and
pressed power here where it stuck with security boot loop so i again flashed the f180L orig fw and here when problem started as there was
NO SIGNAL. now i read many threads here in xda also tried many firmwares also installed ics 4.0.4 no signal but when i installed a 18mb update
for ics 4.0.4 using built in updater full signal came back but when i switched off the phone and turn it on again there,s no signal also installed
open europe 10h firmware the phone shows weak signals and some time no signal. i have tried many basebands using cwmr too but still no
signal. now i totally fedup and tired i think i made a mistake by not taking efs backup with original firmware. what should i do now ?
Click to expand...
Click to collapse
open this file https://mega.co.nz/#!L54n3TjD!GF5xgTzYX1BslEzVMU9QHkQ6SKZsAOZIMEBtNR2udCw
Extract folder "BaseBandF180L_OK" (there was no problem in WIN7 with this procedure) and then:
- connect the phone to USB in MTP MODE and copy "BASEBAND.IMG" to SDCARD ROOT
- check "DEVICE MANAGER-ADB INTERFACE-LG "something"" (it should be OK - only if hou have installed drivers in WinXPMode and you are connecting the phone in WIN7 then you have to install those 3 files from point 2 and 3 above)
- so if you see ADB Interface for LG, you copied the IMG file to SDCARD and your phones ROOT is OK then ...
- just run "FLASH_BASEBAND.BAT" and wait for restart
- now you should be asked for PIN (if you use it ) and you should get a signal (greditsfor all this i going To Happy_Alien)not me

spytgm said:
open this file and view the read me text
Click to expand...
Click to collapse
ok will update after trying this

@spytgm
did what u wrote and again no signal, btw i m using e97510f and when i inserted sim now imei no is showing unknown

U just have to flash ur efs after baseband even if u see ur imei
Sent from my LG-F180 using Tapatalk

davevinci said:
U just have to flash ur efs after baseband even if u see ur imei
Sent from my LG-F180 using Tapatalk
Click to expand...
Click to collapse
u mean i install stock f180L 10M ics firmware and backup efs and than restore it after installing e975 fw ? but problem is after restoring to 4.0.4
ics the signal r still not working so how come that ics stock fw efs backup restore signal in e975 ?

newtown2k12 said:
u mean i install stock f180L 10M ics firmware and backup efs and than restore it after installing e975 fw ? but problem is after restoring to 4.0.4
ics the signal r still not working so how come that ics stock fw efs backup restore signal in e975 ?
Click to expand...
Click to collapse
restore efs(i didnot do that but only flash baseband) and then flash the baseband.be sure that your phone is rooted ,mtp mode,usb debagging and uknown sourses enabled.try to flash jelly bean not ics.
the baseband you have is from jelly bean

spytgm said:
restore efs(i didnot do that but only flash baseband) and then flash the baseband.be sure that your phone is rooted ,mtp mode,usb debagging and uknown sourses enabled.try to flash jelly bean not ics.
the baseband you have is from jelly bean
Click to expand...
Click to collapse
ok so i fllashed f180L 20T (there was no signal) than rooted it installed freegee and took the efs backup than i flashed ind kdz (phone started to get weak signals which disappear after few seconds) than i installed freegee and restore efs and than flashed the f180L baseband and still no signal and also now imei status showing unknown no, i think i have messed up the original baseband which comes with the phone pre installed and didnt took the efs backup at that time, now i m totally clueless.
can anyone post the links of all korean jelly bean kdz that released so far so that i started flashing it one by one and maybe i get the matched baseband

newtown2k12 said:
ok so i fllashed f180L 20T (there was no signal) than rooted it installed freegee and took the efs backup than i flashed ind kdz (phone started to get weak signals which disappear after few seconds) than i installed freegee and restore efs and than flashed the f180L baseband and still no signal and also now imei status showing unknown no, i think i have messed up the original baseband which comes with the phone pre installed and didnt took the efs backup at that time, now i m totally clueless.
can anyone post the links of all korean jelly bean kdz that released so far so that i started flashing it one by one and maybe i get the matched baseband
Click to expand...
Click to collapse
Get KDZ file you would like to use - Stock Firmwares:
Link: LG Optimus G [E975] Roms/Kernels/Mods & Tools/Root (Daily Update)
when baseband flash your phone restart ender pin and wait

i think i messedup the efs partition, can anyone share there f180L efs partition so that i can restore it ?

can anyone post the entire f180L firmwares links ?

newtown2k12 said:
can anyone post the entire f180L firmwares links ?
Click to expand...
Click to collapse
Hi Dear.
Here is almost all version of KDZ in this web <http://lg-phone-firmware.com/index.php?id_mod=20>
I also update my F180L with Hong Kong V10F KDZ works fine.
kindly tell me how u enable EDGE.( EDGE kysy on kia mera phone GPRS py chal raha hy)
Kindly share link.
Thanks
Yousuf

rao_yousuf said:
Hi Dear.
Here is almost all version of KDZ in this web <http://lg-phone-firmware.com/index.php?id_mod=20>
I also update my F180L with Hong Kong V10F KDZ works fine.
kindly tell me how u enable EDGE.( EDGE kysy on kia mera phone GPRS py chal raha hy)
Kindly share link.
Thanks
Yousuf
Click to expand...
Click to collapse
i have tried these kdz from the link u posted above but still no signal, i have also tried ics 4.0.4 but signal came back once i applied the 18mb
update but when i restarted it the signal went off. now i m thinking of removing the battery maybe that will solve the problem ?
here is a tut for enabling edge http://forum.xda-developers.com/showthread.php?t=2596707

Dear you have signal problem due to enable EDGE as you link suggest to me.
i had same problem but i recover after install (backup) signal come.

rao_yousuf said:
Dear you have signal problem due to enable EDGE as you link suggest to me.
i had same problem but i recover after install backup signal come.
if you are in Pakistan, call me i will guide you. 03417679929----03138936373.
Yousuf
Click to expand...
Click to collapse
i have restored the orig backup files of modem that is made by that edge flashing software but still no signal

should i took out the battery ? will that gona help to solve the baseband prob ?

so after trying diff kdz and basebands and no luck with signal i took the phone to mobile expert and he told that efs partition is messed up and
he will fix it by using test point and jtag. whts test point and jtag ?

I´ve posted a link already posted. Sorry ^_^

finally phone is fixed, i took it to pro he fixed it by sending some binary file to some one. now signals r up and i will not going to install any
CUSTOM roms from now on

newtown2k12 said:
finally phone is fixed, i took it to pro he fixed it by sending some binary file to some one. now signals r up and i will not going to install any
CUSTOM roms from now on
Click to expand...
Click to collapse
:good: bro
i also fixed mine 2 days ago and problem was messed up efs .

[GUIDE] Unbrick F240 by turning it to E980

My Optimus G Pro F240L was somehow soft bricked for a month after trying to install a version of CM11. I have tried to download many dfferent F240L .TOT files to get it back to life on Baidu, all files were corrupted, at least for me, and i had the low battery warning when trying to flash official .KDZ .
Then I have tried the tutorial on this thread with AT&T .TOT file for E980, thanks to madmack :
http://forum.xda-developers.com/showthread.php?t=2302660
Don't use the DLL which is there, instead if you have F240L use the one on this thread, thanks to chimmot307:
http://forum.xda-developers.com/showthread.php?t=2368900&page=2
The phone is back to life, but no signal and no SD-card
At this point, you need to root the phone and install CWM using the files in this thread thanks to XQ55 :
http://forum.xda-developers.com/showthread.php?t=2342695
Then Install the F240 baseband or the one compatible with your phone by flashing it in cwm using the files in this thread thanks to anirudhks:
http://forum.xda-developers.com/showthread.php?t=2462453
Ok now the signal an SD-card is back and you have a brand new E980 AT&T phone !!!
Freeze unwanted bloatware with Bloatware freezer free in Google Play Store
You can now also flash official .KDZ for your F240 or keep this version as I did.
GOOD LUCK

same issue
I have LG Optimus GPro F240L too, I tried to flash CM11 ROM but it was brick, the same like you. But I flash TOT file back OK. Now i can root and install CWM through FreeGee, but when flash CM base ROM it doesn't boot, only stock base ROM work. Someone tell my why please !

Well in fact I have tried AICP here, and it works pretty well and very fast.
Install it through Freegee and TWRP. However, I get signal, but whenever I try to make a call, the phone reboots. If I try to install the baseband, the phone gets bricked.
Otherwise a search on google for F240L CM11 gives many results, even on XDA. I didn't have time to try yet. But on E980 official ROM, Antutu has a score of 22500 which is far better than my 19600 with official F240.

Glops4 said:
Well in fact I have tried AICP here, and it works pretty well and very fast.
Install it through Freegee and TWRP. However, I get signal, but whenever I try to make a call, the phone reboots. If I try to install the baseband, the phone gets bricked.
Otherwise a search on google for F240L CM11 gives many results, even on XDA. I didn't have time to try yet. But on E980 official ROM, Antutu has a score of 22500 which is far better than my 19600 with official F240.
Click to expand...
Click to collapse
I have a F240L works with CM11 perfectly.
Only issue i noticed whichever ROM i use i never get SimToolKit(STK) to work even in stock korean ROMs.
I moved to RadeonMAYA ROM as it has the best battery life as compared to the G2 V5 ROM and CM11.
As for the rebooting during phone calls just install ALSA drivers using the guide here on this general section and it will work.
Though you'll have reenable it evertime on Reboots which is a PITA.

Did you have weather effect at lockscreen my friend?

Thanks, I will try alsa drivers. Yesterday I have tried a PACMAN rom downloaded here, and it works wonderful without doing anything. Calls, data network, wifi have no problem at all.
Slimkat 4.4.2 is also there. Not tried yet.

Glops4 said:
My Optimus G Pro F240L was somehow soft bricked for a month after trying to install a version of CM11. I have tried to download many dfferent F240L .TOT files to get it back to life on Baidu, all files were corrupted, at least for me, and i had the low battery warning when trying to flash official .KDZ .
Then I have tried the tutorial on this thread with AT&T .TOT file for E980, thanks to madmack :
http://forum.xda-developers.com/showthread.php?t=2302660
Don't use the DLL which is there, instead if you have F240L use the one on this thread, thanks to chimmot307:
http://forum.xda-developers.com/showthread.php?t=2368900&page=2
The phone is back to life, but no signal and no SD-card
At this point, you need to root the phone and install CWM using the files in this thread thanks to XQ55 :
http://forum.xda-developers.com/showthread.php?t=2342695
Then Install the F240 baseband or the one compatible with your phone by flashing it in cwm using the files in this thread thanks to anirudhks:
http://forum.xda-developers.com/showthread.php?t=2462453
Ok now the signal an SD-card is back and you have a brand new E980 AT&T phone !!!
Freeze unwanted bloatware with Bloatware freezer free in Google Play Store
You can now also flash official .KDZ for your F240 or keep this version as I did.
GOOD LUCK
Click to expand...
Click to collapse
how about the internal storage? 16gb or 32gb?

Ive got the same problem with the battery warning, but ive got a e986. But i think it should work too?

You get 32gb using this method

Glops4 said:
You get 32gb using this method
Click to expand...
Click to collapse
do you know if its a problem when i flash this on 16gb model an flash another rom after the phone is unbricked?

Low battery warning will be gone for sure. Though I'm not sure about the dll, maybe get one for e986.
You can flash on a 16gb no problem.

I have repaired my dead f240L with your help
Glops4 said:
My Optimus G Pro F240L was somehow soft bricked for a month after trying to install a version of CM11. I have tried to download many dfferent F240L .TOT files to get it back to life on Baidu, all files were corrupted, at least for me, and i had the low battery warning when trying to flash official .KDZ .
Then I have tried the tutorial on this thread with AT&T .TOT file for E980, thanks to madmack :
http://forum.xda-developers.com/showthread.php?t=2302660
Don't use the DLL which is there, instead if you have F240L use the one on this thread, thanks to chimmot307:
http://forum.xda-developers.com/showthread.php?t=2368900&page=2
The phone is back to life, but no signal and no SD-card
At this point, you need to root the phone and install CWM using the files in this thread thanks to XQ55 :
http://forum.xda-developers.com/showthread.php?t=2342695
Then Install the F240 baseband or the one compatible with your phone by flashing it in cwm using the files in this thread thanks to anirudhks:
http://forum.xda-developers.com/showthread.php?t=2462453
Ok now the signal an SD-card is back and you have a brand new E980 AT&T phone !!!
Freeze unwanted bloatware with Bloatware freezer free in Google Play Store
You can now also flash official .KDZ for your F240 or keep this version as I did.
GOOD LUCK
Click to expand...
Click to collapse
I"ve repaired & back in f240 successfully Thannnnnnnnnks

azhar63 said:
I"ve repaired & back in f240 successfully Thannnnnnnnnks
Click to expand...
Click to collapse
You are welcome, glad I could help !

CM11 on F240L
Those who want to use CM11 nightlies on F240 Devices.
INSTALL MOKEE ROM kitkat 4.4.4

Noob
Glops4 said:
My Optimus G Pro F240L was somehow soft bricked for a month after trying to install a version of CM11. I have tried to download many dfferent F240L .TOT files to get it back to life on Baidu, all files were corrupted, at least for me, and i had the low battery warning when trying to flash official .KDZ .
Then I have tried the tutorial on this thread with AT&T .TOT file for E980, thanks to madmack :
http://forum.xda-developers.com/showthread.php?t=2302660
Don't use the DLL which is there, instead if you have F240L use the one on this thread, thanks to chimmot307:
http://forum.xda-developers.com/showthread.php?t=2368900&page=2
The phone is back to life, but no signal and no SD-card
At this point, you need to root the phone and install CWM using the files in this thread thanks to XQ55 :
http://forum.xda-developers.com/showthread.php?t=2342695
Then Install the F240 baseband or the one compatible with your phone by flashing it in cwm using the files in this thread thanks to anirudhks:
http://forum.xda-developers.com/showthread.php?t=2462453
Ok now the signal an SD-card is back and you have a brand new E980 AT&T phone !!!
Freeze unwanted bloatware with Bloatware freezer free in Google Play Store
You can now also flash official .KDZ for your F240 or keep this version as I did.
GOOD LUCK
Click to expand...
Click to collapse
I can't say thank you enough for this I did have a soft bricked E980 some how I got something to flash to it but it was then a F240s. Following this guide I now have my AT&T E980 back. :good:

After unbricking F240L and turning into E980- I can only get 4G
Glops4 said:
My Optimus G Pro F240L was somehow soft bricked for a month after trying to install a version of CM11. I have tried to download many dfferent F240L .TOT files to get it back to life on Baidu, all files were corrupted, at least for me, and i had the low battery warning when trying to flash official .KDZ .
Then I have tried the tutorial on this thread with AT&T .TOT file for E980, thanks to madmack :
http://forum.xda-developers.com/showthread.php?t=2302660
Don't use the DLL which is there, instead if you have F240L use the one on this thread, thanks to chimmot307:
http://forum.xda-developers.com/showthread.php?t=2368900&page=2
The phone is back to life, but no signal and no SD-card
At this point, you need to root the phone and install CWM using the files in this thread thanks to XQ55 :
http://forum.xda-developers.com/showthread.php?t=2342695
Then Install the F240 baseband or the one compatible with your phone by flashing it in cwm using the files in this thread thanks to anirudhks:
http://forum.xda-developers.com/showthread.php?t=2462453
Ok now the signal an SD-card is back and you have a brand new E980 AT&T phone !!!
Freeze unwanted bloatware with Bloatware freezer free in Google Play Store
You can now also flash official .KDZ for your F240 or keep this version as I did.
GOOD LUCK
Click to expand...
Click to collapse
I am new and have a question. I have followed all the steps to the tee for unbricking my F240L and turning into a E980, except using king root to root the phone. After rebooting everything has worked perfectly except I can only get 4G speed and cannot get 4G LTE on t-mobile which is available in my area? It is on 4.1.2 and I have also correctly loaded all the APN codes for t-mobile. Maybe it is not possible to get 4G LTE after converting the F240L into a E980? I am open to any suggestions.

Do you know where i can get F240 TOT file?

I'm trying this on my comming F240. And luckily make it a E980, thanks!

ggrue said:
I am new and have a question. I have followed all the steps to the tee for unbricking my F240L and turning into a E980, except using king root to root the phone. After rebooting everything has worked perfectly except I can only get 4G speed and cannot get 4G LTE on t-mobile which is available in my area? It is on 4.1.2 and I have also correctly loaded all the APN codes for t-mobile. Maybe it is not possible to get 4G LTE after converting the F240L into a E980? I am open to any suggestions.
Click to expand...
Click to collapse
I guess you now have to flash official F240L .KDZ as it will work flawlessly and hope you get 4G LTE (I think it is the same as 4G, I may be wrong)

I do not know myself as it is difficult to download from Baidu websites, just use the E980 .TOT file with the guide and uou will be fine. After that you can flash any .KDZ

[SOLVED][Q] Need help urgently [ARTMOD 6]

Hello everyone! As I am new here I'd like to say HI to XDA community!
Okay, what I've done so far is this to my E975 INTL
Rooted, bootloader unlocked and CWM by MAKO method (No problems)
Upgraded to CM12 (No problems)
Restored Nandroid (No problems)
Upgraded to ARTMOD V6 (PROBLEM: Turned to F180L and bricked)
After two days of brick I used LG S/W Update tool and upgraded my phone.... It upgraded to F180L30c .... I want to revert to my own E975 INTL.... How's that possible? Used KDZ method from Upgrader and it won't work.... It would unpack E97510c KDZ and then my phone would boot into fastboot menu... And then nothing... How to make it work? If any other method then please tell me what is it... Please I need help to get rid of this Korean ROM (KK 4.4.2)
Software Upgrade [KDZ] gives errors:
WParam: 100
LParam: 210
I am really disappointed that no one replied on my previous questions... Only 100+ views.

MZ_. said:
Hello everyone! As I am new here I'd like to say HI to XDA community!
Okay, what I've done so far is this to my E975 INTL
Rooted, bootloader unlocked and CWM by MAKO method (No problems)
Upgraded to CM12 (No problems)
Restored Nandroid (No problems)
Upgraded to ARTMOD V6 (PROBLEM: Turned to F180L and bricked)
After two days of brick I used LG S/W Update tool and upgraded my phone.... It upgraded to F180L30c .... I want to revert to my own E975 INTL.... How's that possible? Used KDZ method from Upgrader and it won't work.... It would unpack E97510c KDZ and then my phone would boot into fastboot menu... And then nothing... How to make it work? If any other method then please tell me what is it... Please I need help to get rid of this Korean ROM (KK 4.4.2)
Software Upgrade [KDZ] gives errors:
WParam: 100
LParam: 210
I am really disappointed that no one replied on my previous questions... Only 100+ views.
Click to expand...
Click to collapse
What helped with me is just to flash a kitkat stock rom and flash a e975 modem afterwards. ARTmod is a e975 rom so I dont get how you ran into this problem. Flash an earlier version of ARTmod. Im running ARTmod 5,5 after running into the same problem after flashing sling rom. I hope this works for you

Thanks.... Just a little help
Thanks a lot mate... I owe you one! Done.... Now I'm unbricked and am running E9750C Vietnam's.... I restored IMEI and EFS but still I'm having weak network signals.... When I bought the phone it was on E97510C OPEN HK..... I need to get open Hong Kong version (from KDZ) toget my signal strength back? I'm 50 meters away from networks tower... Still I lose signals literally every time..... Please help me on this.... Thanks alot for answering me.... I don't know how it happened.... Logs were like:
Wiping system
Complete
Wiping baseband
Complete
Installation complete, please reboot :-/
Couldn't mount system or anything.... Flashing kdz worked... Consumed 4 gigabyte download for KDZ lol and if you can please give me woking link for hong kong KDZ E97510C-OPEN-HK
Kdz flashing worked .... Just had to relock boot loader and uninstall custom recovery...

MZ_. said:
Thanks a lot mate... I owe you one! Done.... Now I'm unbricked and am running E9750C Vietnam's.... I restored IMEI and EFS but still I'm having weak network signals.... When I bought the phone it was on E97510C OPEN HK..... I need to get open Hong Kong version (from KDZ) toget my signal strength back? I'm 50 meters away from networks tower... Still I lose signals literally every time..... Please help me on this.... Thanks alot for answering me.... I don't know how it happened.... Logs were like:
Wiping system
Complete
Wiping baseband
Complete
Installation complete, please reboot :-/
Couldn't mount system or anything.... Flashing kdz worked... Consumed 4 gigabyte download for KDZ lol and if you can please give me woking link for hong kong KDZ E97510C-OPEN-HK
Kdz flashing worked .... Just had to relock boot loader and uninstall custom recovery...
Click to expand...
Click to collapse
I dont think it has much to do with the rom itself, you need to flash the baseband again. Usually that works with other roms.