[NOOB] Confused in 4.3 bootloader - Galaxy Note II Q&A, Help & Troubleshooting

Hi Everyone, I'm actually confused, I've downloaded Ditto Note 3 V3.1.1 (http://forum.xda-developers.com/showthread.php?t=2504016) and i want to flash it. It says that it needs bootloader 4.3. I just want to ask, is this with the knox security thing? coz i wanna get rid of that and ofcourse use the phone normally. Any suggestions guys to properly flash DN3 V3.1.1 without knox and properly use it without wifi issues. Thanks in advanced guys.. By the way my phone is Samsung Galaxy Note II (GT-N7105) LTE International

jasonowitzki said:
Hi Everyone, I'm actually confused, I've downloaded Ditto Note 3 V3.1.1 (http://forum.xda-developers.com/showthread.php?t=2504016) and i want to flash it. It says that it needs bootloader 4.3. I just want to ask, is this with the knox security thing? coz i wanna get rid of that and ofcourse use the phone normally. Any suggestions guys to properly flash DN3 V3.1.1 without knox and properly use it without wifi issues. Thanks in advanced guys..
Click to expand...
Click to collapse
Just stay with your current bootloader. If Wi-Fi doesn't work after a couple of reboots, install Dr Ketan's Wi-Fi fix and see if it works.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.

Irwenzhao said:
Just stay with your current bootloader. If Wi-Fi doesn't work after a couple of reboots, install Dr Ketan's Wi-Fi fix and see if it works.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Click to expand...
Click to collapse
Just to make sure.. there is no knox thing? so ill just do the normal flash and if wifi wont work,, ill just flash dr ketan's wifi fix? Thanks oopppsss.. i forgot.. im coming from 4.1.2

jasonowitzki said:
Just to make sure.. there is no knox thing? so ill just do the normal flash and if wifi wont work,, ill just flash dr ketan's wifi fix? Thanks oopppsss.. i forgot.. im coming from 4.1.2
Click to expand...
Click to collapse
Yep
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.

Irwenzhao said:
Yep
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Click to expand...
Click to collapse
last questions sir... can i have a theme modification in case i successfully flash the rom ? like this one (http://forum.xda-developers.com/showthread.php?t=1940742) coz im currently using rom wanamlite with motomoto00 Theme.. would that be possible also to integrate motomoto to DN3? thanks a million times

jasonowitzki said:
last questions sir... can i have a theme modification in case i successfully flash the rom ? like this one (http://forum.xda-developers.com/showthread.php?t=1940742) coz im currently using rom wanamlite with motomoto00 Theme.. would that be possible also to integrate motomoto to DN3? thanks a million times
Click to expand...
Click to collapse
Nope. That theme's for AOSP (Omega ROM, to be specific) while Ditto Note 3 ROM is TouchWiz-Based.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.

Irwenzhao said:
Nope. That theme's for AOSP (Omega ROM, to be specific) while Ditto Note 3 ROM is TouchWiz-Based.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.
Click to expand...
Click to collapse
is this the right link for dr. ketan's wifi fix? (http://forum.xda-developers.com/attachment.php?attachmentid=2342179&d=1382427777)
Thank you so much for answering all my queries.. you're such a big help..

jasonowitzki said:
is this the right link for dr. ketan's wifi fix? (http://forum.xda-developers.com/attachment.php?attachmentid=2342179&d=1382427777)
Thank you so much for answering all my queries.. you're such a big help..
Click to expand...
Click to collapse
Can't see that, I'm on my phone sorry. (Link to that thread will do)
P.S. I never use XDA on my computer haha
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
P.S. replies with quotes will be replied to faster.

Or you can just flash MJ5 bootloader, it is 4.3 bootloader without knox. Much better IMHO than wifi fix.
Sent from my Nexus 7 using xda premium

dalanik said:
Or you can just flash MJ5 bootloader, it is 4.3 bootloader without knox. Much better IMHO than wifi fix.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I would rather stick with my old bootloader. Personal opinion.
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.

jasonowitzki said:
Hi Everyone, I'm actually confused, I've downloaded Ditto Note 3 V3.1.1 (http://forum.xda-developers.com/showthread.php?t=2504016) and i want to flash it. It says that it needs bootloader 4.3. I just want to ask, is this with the knox security thing? coz i wanna get rid of that and ofcourse use the phone normally. Any suggestions guys to properly flash DN3 V3.1.1 without knox and properly use it without wifi issues. Thanks in advanced guys.. By the way my phone is Samsung Galaxy Note II (GT-N7105) LTE International
Click to expand...
Click to collapse
Mate, on the DN3 OP, it was written very clear.
Pls ignore about the wifi patch or anything abt it.
1. If u want to use stock kernel on DN3, u have to use new bootloader. Only new bootloader can dupport 4.3 stock kernel without wifi problem. But new bootloader will come with KNOX.
2. If u want to stick with old bootloader, u can do like what I did... full wipe - flash 3.1.1 dn3 - reboot (at this point u will be with stock kernel nd wifi not working) - update ota to 3.2 dn3 (u have to use ur data network. If ota fail, boot to recovery, flash the zip manually from OTA UPDATE folder) - reboot (wifi still not working) n let few mins to let the rom settle - reboot to recovery - wipe cache and wipe dalvik - flash devil - reboot - done! Ur wifi works nd u r still on 4.1.2 bootloader.
Fyi : devil 2.3.2 is good. Gyroscopes is now working.
Sent from SM-N9005 with xda-app

antique_sonic said:
Mate, on the DN3 OP, it was written very clear.
Pls ignore about the wifi patch or anything abt it.
1. If u want to use stock kernel on DN3, u have to use new bootloader. Only new bootloader can dupport 4.3 stock kernel without wifi problem. But new bootloader will come with KNOX.
2. If u want to stick with old bootloader, u can do like what I did... full wipe - flash 3.1.1 dn3 - reboot (at this point u will be with stock kernel nd wifi not working) - update ota to 3.2 dn3 (u have to use ur data network. If ota fail, boot to recovery, flash the zip manually from OTA UPDATE folder) - reboot (wifi still not working) n let few mins to let the rom settle - reboot to recovery - wipe cache and wipe dalvik - flash devil - reboot - done! Ur wifi works nd u r still on 4.1.2 bootloader.
Fyi : devil 2.3.2 is good. Gyroscopes is now working.
Sent from SM-N9005 with xda-app
Click to expand...
Click to collapse
okay.. now its somewhat clear to me.. the confusing part for me is the OTA update to 3.2? how can it be done... ? you save me here buddy.. i would also love to flash the devil coz ive read its working perfectly with boeflla? is that right?

jasonowitzki said:
okay.. now its somewhat clear to me.. the confusing part for me is the OTA update to 3.2? how can it be done... ? you save me here buddy.. i would also love to flash the devil coz ive read its working perfectly with boeflla? is that right?
Click to expand...
Click to collapse
Actually there is no OTA update to 3.2. You would have to download 1.5GB file and flash it.

jasonowitzki said:
okay.. now its somewhat clear to me.. the confusing part for me is the OTA update to 3.2? how can it be done... ? you save me here buddy.. i would also love to flash the devil coz ive read its working perfectly with boeflla? is that right?
Click to expand...
Click to collapse
ok.
as I mentioned earlier, the process to flash will be :
Flash DN3 v.3.1.1 => reboot (you will boot up the rom with stock kernel, with non working wifi if you are on 4.1.2 bootloader).
Up to here, do not need to worry. let the rom boot up, and then make sure superSU is working.
On my device, there will be a pop up on the notification bar, saying v.3.2 is available. Just click that one. If ask for root permission, grant it.
The OTA updater will download the v.3.2. Just follow instruction. Normally it will reboot to recovery, but won't install the v.3.2. I have no idea why.
When you are in recovery, just wipe cache, and dalvik. then you choose install file from internal sd (the OTA updater will download and save the file on internal SD). Browse to folder call "OTA Updater", and then folder download.
You will find the v.3.2 zip file there.
Just flash it, reboot again after that.
When the rom boot up, you can check on the about device, that you are now on v.3.2.
Now when v.3.2 is up, you can now change to devil kernel (up to you to choose which version. I'm using v.2.3.2 devil kernel), by go into recovery, wipe cache, and dalvik, and then flash your devil kernel.
Then let the system boot up. Now you will have a working Wifi
Notes :
Don't forget to go into Wifi advanced setting, and turn off (uncheck) always scanning. To have a better battery life. This option sucks battery a lot on 4.3 android.
if I'm not wrong, Viper will be better.
Good Luck!
Sent from the corner of this rounded earth behind my PC.

antique_sonic said:
ok.
as I mentioned earlier, the process to flash will be :
Flash DN3 v.3.1.1 => reboot (you will boot up the rom with stock kernel, with non working wifi if you are on 4.1.2 bootloader).
Up to here, do not need to worry. let the rom boot up, and then make sure superSU is working.
On my device, there will be a pop up on the notification bar, saying v.3.2 is available. Just click that one. If ask for root permission, grant it.
The OTA updater will download the v.3.2. Just follow instruction. Normally it will reboot to recovery, but won't install the v.3.2. I have no idea why.
When you are in recovery, just wipe cache, and dalvik. then you choose install file from internal sd (the OTA updater will download and save the file on internal SD). Browse to folder call "OTA Updater", and then folder download.
You will find the v.3.2 zip file there.
Just flash it, reboot again after that.
When the rom boot up, you can check on the about device, that you are now on v.3.2.
Now when v.3.2 is up, you can now change to devil kernel (up to you to choose which version. I'm using v.2.3.2 devil kernel), by go into recovery, wipe cache, and dalvik, and then flash your devil kernel.
Then let the system boot up. Now you will have a working Wifi
Notes :
Don't forget to go into Wifi advanced setting, and turn off (uncheck) always scanning. To have a better battery life. This option sucks battery a lot on 4.3 android.
if I'm not wrong, Viper will be better.
Good Luck!
Sent from the corner of this rounded earth behind my PC.
Click to expand...
Click to collapse
Thanks so much for this wonderful instructions.. now its very clear to me.. thanks

Related

[Q] weird things happening after flashing different roms

I recently learned to flash,
So I used TWRPV to flash coz i cant access the recovery mode becoz of rooting.
1.Flashed Slim Bean. Worked perfectly.
2.Try to flash jellybam. Got flashin failed.
3. Reflshed Slim Bean.
4. Tried to flash Miui rom. Again got error, after googling i found that i have to delete two lines from the script in miui rom with note++
I did that but not worked, then i myself checked the slimbean script, and deleted some more lines from miui script and flashed, still not worked.
5. I did same to jellybam. Then one of jellybam rom worked.
6. Now after reboot some times note 2 switch off itself when in pocket or in table. Or sometime while charging with big battery on screen with stuck tiny round circle. I have to remove the battery to switch on.
and i can't turn on bluetooth also USB not working. In pc device manager when i connect phone to pc via usb it shows CDC COMMUNICATION INTERFACE (7 times), and Com neon Suspend (1 Times)
7. Now using slimbean but problem is still there.
Any idea what happened to my n7100, is my phones efs corrupted, or soft/hard bricked,
I don't have any backups.
Can anybody please help me. I posted it here coz I can't find the same problem anywhere. There arevsimilars but they are different.
And bad English coz I'm Apatani.
Sorry for that.
My note 3 was SICK from some times (from 7 Months)
Some said it was EFS corruption. my problem was occurred because I flashed my N7100 with MIUI rom built for Galaxy S3.
My Bluetooth was not turning ON (Blank in bluetooth adress), Usb not workin with PC, turning of or Freeze while phone sleeps or auto lock.
Tried many things Flashed different Modem or Kernels, Flashed all of the custom roms available for N7100, Flashed Stock from SamMobile site.
and Lost hope... then I continued my daily life with my N7100 (using Red EYE sleep disabler)
But now today I already using Ditto Note 3 v.3.0 (Used v.1.0,v.2.0,)
today Flashed Ditto Note 3 v.3.1.1 with aroma
Selected everything in Aroma Inataller (Including Updated Modem)
then in First Boot my N7100 Freezed while i was entering my Wifi Pin First Device Setup
Waithed for more then 1/2 hour but still Freezed...
then i rebooted it with removing my N7100 Batteries
then again Boot and it Widened my eyes, my mouth was open, and i was Smilin...
My N7100 Bluetooth was turning ON, my USB is connecting to PC without any secret code for UART mode, my Phablets screen turned off, I waited for around half Hour and then i Pushed my Home Button and it respond and turned on the Screen.
Firstly your very brave to do this or your too Rich to afford a new device if you brick it .
Now firstly Please dont make any changes to the existing Rom that you have downloaded seeing other Rom scripts ,
Now before flashing any rom go trough the OP to understand what OP has mentioned about flashing.
Dont Refer to Google refer to ROM OP OR THREAD any question you have post it there so you will get quick response.
aukhahaven said:
Firstly your very brave to do this or your too Rich to afford a new device if you brick it .
Now firstly Please dont make any changes to the existing Rom that you have downloaded seeing other Rom scripts ,
Now before flashing any rom go trough the OP to understand what OP has mentioned about flashing.
Dont Refer to Google refer to ROM OP OR THREAD any question you have post it there so you will get quick response.
Click to expand...
Click to collapse
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
bullooka said:
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
Click to expand...
Click to collapse
Well since your phn is acting weird better flash stock rom via odin and see if the prob persist if all is fine then gv a fresh start flashing recovery and stuff and use philz recovery for flashing if it acts weird than just make the flash counter 0 and take it to service center for precise details go though ketan thread
bullooka said:
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
Click to expand...
Click to collapse
Download Stock ROM,
Flash it it Via Mobile Odin or PC ondin,
Once flash completes Boot into recovery and do a Factory Reset+User data ,this will wipe everything on your device memory .
and then tell which rom you want to flash ill guide on how to do it.
aukhan said:
Download Stock ROM,
Flash it it Via Mobile Odin or PC ondin,
Once flash completes Boot into recovery and do a Factory Reset+User data ,this will wipe everything on your device memory .
and then tell which rom you want to flash ill guide on how to do it.
Click to expand...
Click to collapse
Okay.
I'll inform u when i'am ready...
In my place broadband or network is not that good, to download stock ROM it will take some time.
And thanks for helping me.
bullooka said:
Okay.
I'll inform u when i'am ready...
In my place broadband or network is not that good, to download stock ROM it will take some time.
And thanks for helping me.
Click to expand...
Click to collapse
no problem any time
aukhan said:
no problem any t
Click to expand...
Click to collapse
Actually, I think I found out what exactly happened to my note 2.
The ROM I tried to flash was for s3 (MIUIv5 I9300 Note 2 Edition 3.6.21 by @muchopoli83)
This ROM was flashed after removing the two lines from updater script, the assert lines.
But after flashing my phone didn't started so I changed the ROM.
So, what should I do. Is stock ROM still important.
If yes can u please give me the link.
I found one with pit file in xda but that link is not working
And some guys with similar problems are talking that every stock ROMs are not working for problems like this.
bullooka said:
Actually, I think I found out what exactly happened to my note 2.
The ROM I tried to flash was for s3 (MIUIv5 I9300 Note 2 Edition 3.6.21 by @muchopoli83)
This ROM was flashed after removing the two lines from updater script, the assert lines.
But after flashing my phone didn't started so I changed the ROM.
So, what should I do. Is stock ROM still important.
If yes can u please give me the link.
I found one with pit file in xda but that link is not working
And some guys with similar problems are talking that every stock ROMs are not working for problems like this.
Click to expand...
Click to collapse
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
aukhan said:
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
Click to expand...
Click to collapse
My device model is N7100,
and today I found out that my Bluetooth is also not working, I can't switch it on.
shhbz said:
Well since your phn is acting weird better flash stock rom via odin and see if the prob persist if all is fine then gv a fresh start flashing recovery and stuff and use philz recovery for flashing if it acts weird than just make the flash counter 0 and take it to service center for precise details go though ketan thread
Click to expand...
Click to collapse
Actually I accidentally flashed the wrong ROM . S3 I9300 ROM in my Note 2 N7100.
Is there any other ways to fix this
aukhan said:
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
Click to expand...
Click to collapse
My model is N7100.
Can you tell me what happened to my note2, efs damage or soft/hard bricked
And what should I do.
Please tell me.:crying:
Still got the problem
Still got the problem and cant find any solution
anybody any idea
Simply go to recovery wipe everything including format_system,
then choose any rom from N7100 development thread as your suitability .
and flash in recovery as per instructions given in OP
Then tell here what happened
looks like efs croupt no worries just flash stock rom from odin then root it with cf-root method
use triangle away to remove the flash counter and then reboot unroot from su app and ur good to go to service center
just tell them i updated this phone to latest from ota and it failed iam when it restarted there was no cellular
bullooka said:
Still got the problem and cant find any solution
anybody any idea
Click to expand...
Click to collapse
Do you have GSM network?
Flash Stock ROM via PC Odin v3.09 and use re-partition and Nand erase all with PIT file, Freset Autoreboot.
After flash complete everything must be ok.
I had the same problem few weeks ago. I also tried to flash alot of ROMs but same problem exist. found a solution to this problem yesterday this is what I did
1. Download leaked 4.3 it will take time because the file is 1.2gb
http://forum.xda-developers.com/showthread.php?t=2499794
2. After download flash it via Odin in pda. Make sure auto reboot and f.Reset time only have check.
3. If the flash fails, it's ok but make sure it already flashed the radio and modem.
4. Reboot again in download mode then flash Philz recovery
5. Reboot in recovery mode then flash slimbean rom or any rom you prefer.
6. Install gapps
7. Wipe cache and dalvik
8. Reboot and your ok now
I'm in slimrom build 2 now. Bluetooth is ok and no more reboot when phone sleeps after few seconds.
Hope this helps.
Sent from my GT-N7100 using xda app-developers app
taticuio said:
Do you have GSM network?
Flash Stock ROM via PC Odin v3.09 and use re-partition and Nand erase all with PIT file, Freset Autoreboot.
After flash complete everything must be ok.
Click to expand...
Click to collapse
Got the GSM, WIFI is also OK but bluetooth,USB and reboot on sleep. but what re-partition and Nand erase work for and what is PIT file and where should i get it
any help
Still got the problem
Ok i'll try the leaked version and thanks for reply
bullooka said:
Got the GSM, WIFI is also OK but bluetooth,USB and reboot on sleep. but what re-partition and Nand erase work for and what is PIT file and where should i get it
any help
Click to expand...
Click to collapse
Never try to touch or else you'll get a big problem.
Sent from my GT-N7100 using xda app-developers app

DN3 issues Q

I am bit of a new with rooting/flashing ROMs so apologies is some questions sounds stupid
I had a bog stock note 2 int. model with 4.1.2, I rooted, CWM and flashed DN3 plus MJ5 boot loader + wifi fix and it is working fine, however I seem to be missing a lot of the stock widgets, the full page ones with Gallery/Data Usage/Alarm Clock etc.. and also when I put widgets on a screen they seem to dissapear again, have a few issues with touchwizz stopping and also settings not responding, another one is multiwindow, for some reason Xposed installer will not do the update/install in framework, it stops there and then I get an error that setting have stopped -
anyone have an idea what I have missed doing ???
Okay... about that flashing of DN3... you went FULL wipe, right? System, Data and everyghint (besides boot and SDcard)? Second, if you flash mj5 you DON'T need the WiFi fix from Dr. Ketan's thread. mj5 works just fine. Also pay attention to the OP > Downloads section, there are some fixes and additional zips to be flashed (Gallery + SNS, widged fix).
My advice? Wipe ALL and flash ROM again. Then flash the SNS + Gallery and widgets fixes. It should be working like a charm.
Ruwin said:
Okay... about that flashing of DN3... you went FULL wipe, right? System, Data and everyghint (besides boot and SDcard)? Second, if you flash mj5 you DON'T need the WiFi fix from Dr. Ketan's thread. mj5 works just fine. Also pay attention to the OP > Downloads section, there are some fixes and additional zips to be flashed (Gallery + SNS, widged fix).
My advice? Wipe ALL and flash ROM again. Then flash the SNS + Gallery and widgets fixes. It should be working like a charm.
Click to expand...
Click to collapse
In addition, also in OP, you can see link for the flashable stock widgets which you said your missing.. So all your stated problems is not actually problems at all but a matter of very well reading habit.
Flash with a clean wipe using philz
Wipe for clean rom option
Wipe data,cache,system,dalvik
Mount and storage-wipe internal sd
Flash dn3 zip
Reboot n set ur phn
Flash fix done.
Sent from my GT-N7100 using XDA Premium 4 mobile app
thx man
Thanks for reply the man, just to double check I do it completely right this time..
I do all swipe and flashes from CWM right ?
Swipes first then flash the Ditto zip file and then download the fixes and copy to SD card and flash 1 by 1
Ruwin said:
Okay... about that flashing of DN3... you went FULL wipe, right? System, Data and everyghint (besides boot and SDcard)? Second, if you flash mj5 you DON'T need the WiFi fix from Dr. Ketan's thread. mj5 works just fine. Also pay attention to the OP > Downloads section, there are some fixes and additional zips to be flashed (Gallery + SNS, widged fix).
My advice? Wipe ALL and flash ROM again. Then flash the SNS + Gallery and widgets fixes. It should be working like a charm.
Click to expand...
Click to collapse
shhbz said:
Flash with a clean wipe using philz
Wipe for clean rom option
Wipe data,cache,system,dalvik
Mount and storage-wipe internal sd
Flash dn3 zip
Reboot n set ur phn
Flash fix done.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm on t889, I used the n7105 option in Aroma. I've no problem getting signals, I can call and receive the calls, and also using internet but I can't hear anything neither the person on the other end can hear me. plz tell me that there's a fix for this

problam with phoneix rom v15

hii people
i tried to flash phoneix rom on my note 2 but everytime i flash it it's luncher is the easy mod luncher in the settings the easy mod is off and i tried 3 times with 3 other combination but without luck
i appreciate every try for help and god bless you people
have a good week
and happy christmas:fingers-crossed:
Almog
almogdavid said:
hii people
i tried to flash phoneix rom on my note 2 but everytime i flash it it's luncher is the easy mod luncher in the settings the easy mod is off and i tried 3 times with 3 other combination but without luck
i appreciate every try for help and god bless you people
have a good week
and happy christmas:fingers-crossed:
Almog
Click to expand...
Click to collapse
happnd to me as well tried every step bt notin happned so i got back to DN3
myk1709 said:
happnd to me as well tried every step bt notin happned so i got back to DN3
Click to expand...
Click to collapse
x
hi bud dn3 have emoji or the lg keyborad and all the tweaks that phoenix have?
i really like phoneix and i must find sultion
if i will find some thing i will say to you
someone?!??!?!??
i need halp someone
almogdavid said:
someone?!??!?!??
i need halp someone
Click to expand...
Click to collapse
clear the default data on application settings so easy tw is not your default launcher, or install any other launcher that it will ask you again
almogdavid said:
x
hi bud dn3 have emoji or the lg keyborad and all the tweaks that phoenix have?
i really like phoneix and i must find sultion
if i will find some thing i will say to you
Click to expand...
Click to collapse
true DN3 lacks a lot of tweaks bt v3.1.1 is quite btr using it from a long time no lags no bugs bt yeah if u find somtin let me knw :good:
myk1709 said:
true DN3 lacks a lot of tweaks bt v3.1.1 is quite btr using it from a long time no lags no bugs bt yeah if u find somtin let me knw :good:
Click to expand...
Click to collapse
try that it didnt work for me but do what u want to
gsoros said:
clear the default data on application settings so easy tw is not your default launcher, or install any other launcher that it will ask you again
Click to expand...
Click to collapse
it's a probalm inside of it he didnt have the regular luncher and when i try to replace it with good one it writh permission denied
best rom in the world ... phoenix 15.7
first of all try reading the THREAD which is for phoenix 15 ... you will get all your answers,
second thing is that when you see easy mode launcher ... means your installation was bad ... or not correct,
So first download super wipe script and install that super wipe first ... then install phoenix 15 ... dont select any mode ... any tweaks ... any application,
at the end when you press finish ... dont reboot ... go back to philz recovery ... delete cache partition and devil cache,
now reboot recovery ... i didnt said reboot phone ... i said reboot into recovery again,
now install 15.7 patch ... again at the end dont reboot ... go back and clear cache and clear devil cache ...
now finally restart your phone for the first time.
if anytime philz recovery ask that root lost ... say NO to that fix.
let me know the results what you see on the first boot
MehruNisa said:
first of all try reading the THREAD which is for phoenix 15 ... you will get all your answers,
second thing is that when you see easy mode launcher ... means your installation was bad ... or not correct,
So first download super wipe script and install that super wipe first ... then install phoenix 15 ... dont select any mode ... any tweaks ... any application,
at the end when you press finish ... dont reboot ... go back to philz recovery ... delete cache partition and devil cache,
now reboot recovery ... i didnt said reboot phone ... i said reboot into recovery again,
now install 15.7 patch ... again at the end dont reboot ... go back and clear cache and clear devil cache ...
now finally restart your phone for the first time.
if anytime philz recovery ask that root lost ... say NO to that fix.
let me know the results what you see on the first boot
Click to expand...
Click to collapse
I most to do a suoer wipe and clean everything from my phone?
better download phoenix v16
yes superwipe is great ... it will not touch your external sd card or internal builtin sd card, thats how it work for me.
you can download that superwipe script from phoenix extra section,
better you download v16 now ... latest is out
i also facing a same problem. i dont know how to fix that even i did the super wipe also still same.
ThePraetor said:
i also facing a same problem. i dont know how to fix that even i did the super wipe also still same.
Click to expand...
Click to collapse
Hey you guys,
Read the changelog in Phoenix rom v15.7. Easy mode is fixed there'l.
If you are on Phoenix v15, you can update with ota update (just 267 MB) or wait for v16. @tamirda he is uploading v16. almost out
Sent from my GT-N7100 using XDA Premium 4 mobile app
yeminswe said:
Hey you guys,
Read the changelog in Phoenix rom v15.7. Easy mode is fixed there'l.
If you are on Phoenix v15, you can update with ota update (just 267 MB) or wait for v16. @tamirda he is uploading v16. almost out
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the easy mode issue happen at me on v15.7 and not v15. but for v16 fixed. :good:

TouchWiz ROM help

Hello there,
I'm new to Android (got me note 2 three days ago) and I rooted the phone yesterday, I flashed cm ROM into the note, because It was as simple as an iPhone, and it was fast, but I lost some of the greatest features that note 2, offers which are the multiscreen and the S-Pen features, I have posted a help thread about that and they replied that I need a Touchwiz ROM, I went to my close friend Google and searched for Touchwiz rom(s) but there were way too many, can you recommend a good light one with nice interface and noob-friendly? I would really appreciate it.
With regards,
OverDub
Sent from my GT-N7100 using xda app-developers app
It's hard to say which is best. A twizz rom is a stock based rom. If you want a rom with lots of features I'd look at one of the note 3 based roms like ditto. If you want something light any rooted stock rom will do then you can use titanium backup to freeze or remove anything you don't use. If you want to increase battery life then check out apps like greenify and receiver stop. They help to stop rogue programs running in the background
Sent from my GT-P3110 using XDA Premium 4 mobile app
Thanks for your help, seems that dn3 is good but I have a question, I'm using a Cyanogenmod ROM, will upgrading from cm to dn3 cause me any problems?
Sent from my GT-N7100 using xda app-developers app
No there will be no problem at all. If you are already on a 4.3 bootloader you will be fine If you aren't you just need to flash either the wifi patch or devil kernel to get wifi. I am on the n7105 which is slightly different. If you follow any of Dr ketan's guides you will not go wrong. Airview pen window and quad screen multi window are all pretty cool features in dn3
Sent from my GT-N7105 using XDA Premium 4 mobile app
You can try Tiagra ROM, its supposed to be 4.3 Touchwiz ROM with the features of Note 3.
sawdoctor said:
No there will be no problem at all. If you are already on a 4.3 bootloader you will be fine If you aren't you just need to flash either the wifi patch or devil kernel to get wifi. I am on the n7105 which is slightly different. If you follow any of Dr ketan's guides you will not go wrong. Airview pen window and quad screen multi window are all pretty cool features in dn3
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you a bunch, I'm running a 4.3.1 jellybean CyanogenMod, im I going to need to flash a WiFi patch or a kernel ?
Sent from my GT-N7100 using xda app-developers app
Just do a full wipe (is a must and most advisable) when you jump from 1 rom to another.
If you are not sure which bootloader you are in now (noobproof in my opinion) :
1) try download all the files you need first, and put them all on the SD card (ROM, Wifi patch N7100 dr. ketan).
2) Full wipe (if you are on philz cwm, do a clean wipe to flash new rom), and flash new rom.
3) let it boot. Try the wifi, if it doesn't work, it means you are on the old bootloader, then you have to follow the wifi patch instructions (or flash devil kernel on my device N7105).
antique_sonic said:
Just do a full wipe (is a must and most advisable) when you jump from 1 rom to another.
If you are not sure which bootloader you are in now (noobproof in my opinion) :
1) try download all the files you need first, and put them all on the SD card (ROM, Wifi patch N7100 dr. ketan).
2) Full wipe (if you are on philz cwm, do a clean wipe to flash new rom), and flash new rom.
3) let it boot. Try the wifi, if it doesn't work, it means you are on the old bootloader, then you have to follow the wifi patch instructions (or flash devil kernel on my device N7105).
Click to expand...
Click to collapse
Thank you for the reply, I have the ROM manager app which is associated with CWM, it has the (install a ROM from SD card) option, and if u press it There are two checks which are (wipe data) and (wipe cache).
Is it safe to use the ROM manager way of installing a ROM ?
P.S: I used the ROM manager way yesterday to change ROMs from cm 10.2 to cm 10.2 nightly and it worked perfectly.
Sent from my GT-N7100 using xda app-developers app
OverDub said:
Thank you for the reply, I have the ROM manager app which is associated with CWM, it has the (install a ROM from SD card) option, and if u press it There are two checks which are (wipe data) and (wipe cache).
Is it safe to use the ROM manager way of installing a ROM ?
P.S: I used the ROM manager way yesterday to change ROMs from cm 10.2 to cm 10.2 nightly and it worked perfectly.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Better flash MJ5 bootloader than Wifi-patch. A lot of people reported problems without new bootloader. MJ5 is knox-free.
OverDub said:
Thank you for the reply, I have the ROM manager app which is associated with CWM, it has the (install a ROM from SD card) option, and if u press it There are two checks which are (wipe data) and (wipe cache).
Is it safe to use the ROM manager way of installing a ROM ?
P.S: I used the ROM manager way yesterday to change ROMs from cm 10.2 to cm 10.2 nightly and it worked perfectly.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
You can try what dalanik suggest for the bootloader.
as for the flashing of DN3, I would suggest u flash Philz CWM, or TWRP. I myself use Philz CWM (I always use his since Note1, and so far give me less headache in my personal opinion/experienced).
Anyway, CM10.2 to CM10.2 nightly are still the same base CM. When you want to jump into TW from CM, I would highy recommend to do a full wipe. And the full wipe is the best do from recovery.
I'm sorry, I have no idea on using ROM manager to flash ROM on Note device. I left it long time ago. Galaxy S1 is my last device to use ROM manager.
antique_sonic said:
You can try what dalanik suggest for the bootloader.
as for the flashing of DN3, I would suggest u flash Philz CWM, or TWRP. I myself use Philz CWM (I always use his since Note1, and so far give me less headache in my personal opinion/experienced).
Anyway, CM10.2 to CM10.2 nightly are still the same base CM. When you want to jump into TW from CM, I would highy recommend to do a full wipe. And the full wipe is the best do from recovery.
I'm sorry, I have no idea on using ROM manager to flash ROM on Note device. I left it long time ago. Galaxy S1 is my last device to use ROM manager.
Click to expand...
Click to collapse
Good advice. Most people seem to have more success with phils revovery on DN3. Aroma can be buggy at times and different recoveries can struggle with aroma
Sent from my GT-N7105 using XDA Premium 4 mobile app
antique_sonic said:
You can try what dalanik suggest for the bootloader.
as for the flashing of DN3, I would suggest u flash Philz CWM, or TWRP. I myself use Philz CWM (I always use his since Note1, and so far give me less headache in my personal opinion/experienced).
Anyway, CM10.2 to CM10.2 nightly are still the same base CM. When you want to jump into TW from CM, I would highy recommend to do a full wipe. And the full wipe is the best do from recovery.
I'm sorry, I have no idea on using ROM manager to flash ROM on Note device. I left it long time ago. Galaxy S1 is my last device to use ROM manager.
Click to expand...
Click to collapse
Well , I Wiped , cleared cache and dalvik cache, then flashed the DN3 rom , now im stuck in a bootloop after the DN3 finished installing, i cant access my recovery menu , i tried flashing philz and still cant access, the only thing i can access is the download mod[VolumeDown+Home+Power]
I would really appreciete some help because i might have bricked my phone, im a completely new to this, so please help in the "noob" language.
OverDub said:
Well , I Wiped , cleared cache and dalvik cache, then flashed the DN3 rom , now im stuck in a bootloop after the DN3 finished installing, i cant access my recovery menu , i tried flashing philz and still cant access, the only thing i can access is the download mod[VolumeDown+Home+Power]
I would really appreciete some help because i might have bricked my phone, im a completely new to this, so please help in the "noob" language.
Click to expand...
Click to collapse
So... you really did it from ROM manager ? I guess you are faster then I reply earlier.
ok.. Now you go to this website : http://www.mediafire.com/?v6cyi52g2ydbd
and then download : philz_touch_5.00.5-n7100.tar.md5
after that you can flash it from PC Odin (since you said u still can go into download mode).
Once you see pass and your phone reboot, press vol up + home + power to go into recovery. You shall see Philz CWM there.
here is how to flash PHilz from PC Odin :
http://forum.xda-developers.com/showthread.php?t=2028103
(go to post #2)
antique_sonic said:
So... you really did it from ROM manager ? I guess you are faster then I reply earlier.
ok.. Now you go to this website : http://www.mediafire.com/?v6cyi52g2ydbd
and then download : philz_touch_5.00.5-n7100.tar.md5
after that you can flash it from PC Odin (since you said u still can go into download mode).
Once you see pass and your phone reboot, press vol up + home + power to go into recovery. You shall see Philz CWM there.
here is how to flash PHilz from PC Odin :
http://forum.xda-developers.com/showthread.php?t=2028103
(go to post #2)
Click to expand...
Click to collapse
I followed your steps , by going into recovery and doing a full wipe , then flashing it, but i ended up in a bootloop, thanks for the quick reply
antique_sonic said:
So... you really did it from ROM manager ? I guess you are faster then I reply earlier.
ok.. Now you go to this website : http://www.mediafire.com/?v6cyi52g2ydbd
and then download : philz_touch_5.00.5-n7100.tar.md5
after that you can flash it from PC Odin (since you said u still can go into download mode).
Once you see pass and your phone reboot, press vol up + home + power to go into recovery. You shall see Philz CWM there.
here is how to flash PHilz from PC Odin :
http://forum.xda-developers.com/showthread.php?t=2028103
(go to post #2)
Click to expand...
Click to collapse
Thank you so much for solving this , i now have my old CM 10.2 Nightly , so now DN3 is a no for me because of what happened , any similar roms you can recommend ?
Thank you again
OverDub said:
Thank you so much for solving this , i now have my old CM 10.2 Nightly , so now DN3 is a no for me because of what happened , any similar roms you can recommend ?
Thank you again
Click to expand...
Click to collapse
btw.. which version of CWM Philz installed on your phone ?
if you want the Note3 features, I only know DN3. Sorry I rarely see the N7100 ROM, because I only own a N7105.
But if you don't care about Note3 feature, I believe N7100 got so many rom you can try....
antique_sonic said:
btw.. which version of CWM Philz installed on your phone ?
if you want the Note3 features, I only know DN3. Sorry I rarely see the N7100 ROM, because I only own a N7105.
But if you don't care about Note3 feature, I believe N7100 got so many rom you can try....
Click to expand...
Click to collapse
My CWM is 6.0.4.3 and the philz i downloaded before you told me to download 5.00.5 was 6.70.9 , i think its the latest.
OverDub said:
My CWM is 6.0.4.3 and the philz i downloaded before you told me to download 5.00.5 was 6.70.9 , i think its the latest.
Click to expand...
Click to collapse
yep correct.
If you ever consider to try again, inside Philz, when you choose wipe data/factory reset, there's option something like "Clean wipe to install new ROM". choose this one. It will do necessary wiping + formatting system/data and necessary formatting. Then you can wipe cache & dalvik. Then you can go on on flashing again.
Or... The best way that I always use, is to clean the internal storage (if I jump from TW to AOSP or the other way around), by using Zoots script. This script (custom wipe => mega wipe), will remove everything inside the internal storage. It will make a very clean place (until your backside ) to flash new ROM.
Link : http://forum.xda-developers.com/showthread.php?t=1983489
Use it with Philz 5.0.0.5
Just an opinion, if you would ever like to try again in the future.
All recoveries can be a bit buggy with aroma and bootloop is common. Sometimes turning the phone on and off works sometimes it can take 3 or 4 attempts to work so don't panic. I don't think one of us has never had a bootloop with aroma. As antique_sonic said I think earlier versions of phils play better with aroma. I think it's version 5.15 not 5.05 that's the one I used anyway
Sent from my GT-N7105 using XDA Premium 4 mobile app
sawdoctor said:
All recoveries can be a bit buggy with aroma and bootloop is common. Sometimes turning the phone on and off works sometimes it can take 3 or 4 attempts to work so don't panic. I don't think one of us has never had a bootloop with aroma. As antique_sonic said I think earlier versions of phils play better with aroma. I think it's version 5.15 not 5.05 that's the one I used anyway
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks
5.15 it is :highfive:

Flashing dn3 on us tmobile note2

What exactly needs to be done to get dn3 rom working on the us tmobile note 2? Im having an issue finding the appropriate steps.
1. Be sure you download DN3 for the N7105 or i317
2. If you're not on 4.3 Bootloader then download Devil Kernel or AGNi Kernel (this will help get wifi to work)
3. Download Tmobiles mk7 modem
4. Be sure you're using TWRP or CWM
5. Wipe - System, Data, Dalvik-Cache & Cache
6. Flash DN3 Rom and reboot. (Flashing things over it before its first boot will not alliw it to boot)
7. Flash Kernel and modem.
Thanks. I couldnt find any definitive posts on the process. What kernel do you reccomend?
I'm using Devil but I've heard good things with AGNi.
Hope we get 4.4.2 dn3 soon
one80oneday said:
Hope we get 4.4.2 dn3 soon
Click to expand...
Click to collapse
my mouth is drooling for this
any scoop on it?
Double0EK said:
1. Be sure you download DN3 for the N7105 or i317
2. If you're not on 4.3 Bootloader then download Devil Kernel or AGNi Kernel (this will help get wifi to work)
3. Download Tmobiles mk7 modem
4. Be sure you're using TWRP or CWM
5. Wipe - System, Data, Dalvik-Cache & Cache
6. Flash DN3 Rom and reboot. (Flashing things over it before its first boot will not alliw it to boot)
7. Flash Kernel and modem.
Click to expand...
Click to collapse
Would u recommend the same steps for me? I have a tmobile note 2 and I unrooted it to get it back to 4.1.1 so I could unlock it to use my at&t sim card and everything working great so I rerooted it and now I want to flash the dn3 rom but im not sure what steps I need to take? Would I need abdifferent approach from your recommended steps here?
express21 said:
my mouth is drooling for this
any scoop on it?
Click to expand...
Click to collapse
Soon.
Sent from my NoteII
Does DN3 have all the Tmobile apps like wifi calling and visual voice mail? Does it have Note 3 apps too like the calendar and action memo
edo101 said:
Does DN3 have all the Tmobile apps like wifi calling and visual voice mail? Does it have Note 3 apps too like the calendar and action memo
Click to expand...
Click to collapse
It is not based on a tmo TW rom so WiFi calling is not included.
Hastily spouted for your befuddlement
How is battery life on DN3?
Currently im gettin on my current rom average 16 hours with 3 hours screen and 26 % battery left.
Is this rom up there with these figures?
Thanks in advance.
Cheers
I get 1 day+ 3 hours from 100% charge and im always on wifi so its a great rom and its stable.
I cant wait to get 4.4!
Sent from my SGH-T889
Hey guys. I installed dn3 v3.1.1 LTE yesterday and in aroma, I chose the n7105 install. Everything booted up and I got 4G instantly. After letting it sit for a little, I started using it and experienced a little lag and went ahead and flashed devil kernel 2.3.2. The phone is still lagging at times and had 3 random freezes/restarts. And the blue tooth audio is choppy at times when I'm doing anything else on the phone. Extreme lag at times. I'm coming from jedi X2 and updated my bootloader when I installed jedi.
Any suggestions?
I'm using tmobile note 2
Sent from my GT-N7105 using XDA Free mobile app
desikilla said:
Hey guys. I installed dn3 v3.1.1 LTE yesterday and in aroma, I chose the n7105 install. Everything booted up and I got 4G instantly. After letting it sit for a little, I started using it and experienced a little lag and went ahead and flashed devil kernel 2.3.2. The phone is still lagging at times and had 3 random freezes/restarts. And the blue tooth audio is choppy at times when I'm doing anything else on the phone. Extreme lag at times. I'm coming from jedi X2 and updated my bootloader when I installed jedi.
Any suggestions?
I'm using tmobile note 2
Sent from my GT-N7105 using XDA Free mobile app
Click to expand...
Click to collapse
DN3 is already on KitKat. You should flash that.. you will need to be, atleast, on the 4.1.2 bootloader. Then you can flash AGNi Kernel 4.0
Double0EK said:
DN3 is already on KitKat. You should flash that.. you will need to be, atleast, on the 4.1.2 bootloader. Then you can flash AGNi Kernel 4.0
Click to expand...
Click to collapse
I wish someone would make a youtube tutorial on how to do this...
Really?
Is self explanitory...
Be sure you have at least MD1 bootloader.
1. Download Rom
2. Backup current Rom (optional)
3. Wipe
4. Flash Rom
5. Reboot
6. Setup
7. Reboot back into recovery and flash other options (kernel, modem, superSU...etc)
Double0EK said:
1. Be sure you download DN3 for the N7105 or i317
2. If you're not on 4.3 Bootloader then download Devil Kernel or AGNi Kernel (this will help get wifi to work)
3. Download Tmobiles mk7 modem
4. Be sure you're using TWRP or CWM
5. Wipe - System, Data, Dalvik-Cache & Cache
6. Flash DN3 Rom and reboot. (Flashing things over it before its first boot will not alliw it to boot)
7. Flash Kernel and modem.
Click to expand...
Click to collapse
Does flashing the kernel and modem get the Wi-Fi calling to work? I just wanted to confirm. I am not sure if you were referring to Wi-Fi in general. Thanks.
vandoc said:
Does flashing the kernel and modem get the Wi-Fi calling to work? I just wanted to confirm. I am not sure if you were referring to Wi-Fi in general. Thanks.
Click to expand...
Click to collapse
WiFi in general. You have to be on a T-Mobile stock ROM to use WiFi calling with T-Mobile as already answered on the first page.

Categories

Resources