I am getting an error flashing to 4.0.4 stock odin flash. I am pretty sure that the phone is not on 4.3 (I bought it thinking i could fix it) as it doesn't have the warrenty bit on the downloading screen.
this is my odin log:
ID:0/062> Added!!
<ID:0/062> Odin v.3 engine (ID:62)..
<ID:0/062> File analysis..
<ID:0/062> SetupConnection..
<ID:0/062> Initialzation..
<ID:0/062> Get PIT for mapping..
<ID:0/062> Firmware update start..
<ID:0/062> recovery.img
<ID:0/062> NAND Write Start!!
<ID:0/062> rpm.mbn
<ID:0/062> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
Could you possibly boot into the phone and see if it is on Android 4.3?
codemonkey98 said:
Could you possibly boot into the phone and see if it is on Android 4.3?
Click to expand...
Click to collapse
The phone does not boot. It turns on then resets into recovery mode with a bunch of cannot mount error messages.
wireless_planets said:
The phone does not boot. It turns on then resets into recovery mode with a bunch of cannot mount error messages.
Click to expand...
Click to collapse
You wouldn't mind posting the errors, or taking a picture of the errors?
codemonkey98 said:
You wouldn't mind posting the errors, or taking a picture of the errors?
Click to expand...
Click to collapse
Here is the errors
Your phone has gone completely insane. The file systems, the NAND, etc are all messed up. When you cannot write to the NAND or the system, you got much of a problem.
Have you tried to see if you can flash a .PIT with Odin?
codemonkey98 said:
Your phone has gone completely insane. The file systems, the NAND, etc are all messed up. When you cannot write to the NAND or the system, you got much of a problem.
Have you tried to see if you can flash a .PIT with Odin?
Click to expand...
Click to collapse
I tried flashing the pit of i747 and it was successful, but still could not flash pda afterwards.
wireless_planets said:
I tried flashing the pit of i747 and it was successful, but still could not flash pda afterwards.
Click to expand...
Click to collapse
What were the errors that Odin gave you?
codemonkey98 said:
What were the errors that Odin gave you?
Click to expand...
Click to collapse
The odin errors are on the first post
wireless_planets said:
The odin errors are on the first post
Click to expand...
Click to collapse
My mistake. I'd really be interested in how this device became like this.
I would assume by now you'll need a new motherboard because the NAND isn't writing properly.
codemonkey98 said:
My mistake. I'd really be interested in how this device became like this.
I would assume by now you'll need a new motherboard because the NAND isn't writing properly.
Click to expand...
Click to collapse
I bought it from a customer. They took it to a guy was suppose to unlock it and he broke it. They wanted to sell it and I bought it for 50$ I figured I could fix it.
Would jtag be able to fix it? I have riff box that I rarely use, so I could order the connection for it.
wireless_planets said:
I bought it from a customer. They took it to a guy was suppose to unlock it and he broke it. They wanted to sell it and I bought it for 50$ I figured I could fix it.
Would jtag be able to fix it? I have riff box that I rarely use, so I could order the connection for it.
Click to expand...
Click to collapse
It's worth a shot but I do not think so at this point. I would believe a motherboard would be the only fix.
Related
Hi all , today I've flash the stock rom for my Note 2 , but after that , my Note 2 cannot registered on the network and the IMEI was change to 0049xxx...
Then I've flash the new Modem here as this guy told http://forum.xda-developers.com/showpost.php?p=43037352&postcount=134.
But in Odin , I choose the file in PDA tab instead of Phone Tab and the modem can still flash ok. After that ,when reboot my phone , it cannot turn off every time the screen is off. And I can't make my phone become normal , i've reflash the stock rom many times , but that didn't help.
Someone please help me?
And I cannot connect to KIES anymore ...
heorung said:
And I cannot connect to KIES anymore ...
Click to expand...
Click to collapse
hey. try flashing the rom again using odin and set it as PDA..
after that, lei it boot.. if you still not getting any signal, or lost ypur imei, flash the modem and set it as PHONE
Hope it works
among4239bulan said:
hey. try flashing the rom again using odin and set it as PDA..
after that, lei it boot.. if you still not getting any signal, or lost ypur imei, flash the modem and set it as PHONE
Hope it works
Click to expand...
Click to collapse
Hi , thanks for the reply , did you mean flash the firmware file with the PHONE option tick?
heorung said:
Hi , thanks for the reply , but how to set pda or phone?
Click to expand...
Click to collapse
see image below..
the red circle is PDA, insert your ROM file here.
the pink circle is PHONE, insert your MODEM file here.
also wipe cache, data and dalvik cache in cwm.
among4239bulan said:
see image below..
the red circle is PDA, insert your ROM file here.
the pink circle is PHONE, insert your MODEM file here.
also wipe cache, data and dalvik cache in cwm.
Click to expand...
Click to collapse
Hi among4239bulan , i already tried that but the phone still mess up , i've tried to flash the newwest stock rom and the network has return back to normal , but the phone cannot turn on whenever the screen is off
Don't know if put the modem.tar.md5 in the "PDA" slot is destroyed anything ?
I download the rescue firmware but Odin cannot flash it , it's always stuck at
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
heorung said:
Hi among4239bulan , i already tried that but the phone still mess up , i've tried to flash the newwest stock rom and the network has return back to normal , but the phone cannot turn on whenever the screen is off
Don't know if put the modem.tar.md5 in the "PDA" slot is destroyed anything ?
I download the rescue firmware but Odin cannot flash it , it's always stuck at
Click to expand...
Click to collapse
it may be related to the wrongly placed modem.tar earlier.. just try flashing another rom,custom one just to see whether the problem still persist.. or have you tried the pre-rooted stock rom that dr.ketan had provided?
Hi among4239bulan , i used the Mobile Odin to flash the rescue firmware , and seems that the problem was gone. Thanks for your help , I really appreciate that ^^
heorung said:
Hi among4239bulan , i used the Mobile Odin to flash the rescue firmware , and seems that the problem was gone. Thanks for your help , I really appreciate that ^^
Click to expand...
Click to collapse
no problem, glad that the problem is solved.
Hey there,
I know some people have been requesting this for quite some time! This couldn't have been possible without @techguy1214 so a huge thanks goes out to him!
This is the absolute STOCK M919N Firmware. (THIS IS NOT ROOTED!)
EXPERIMENTAL: This is UNTESTED by me, I compiled this ODIN tar file using the same structure the T-Mobile ODIN File has. I do not have the MetroPCS version of this phone, I have the T-Mobile version. But I figured enough people wanted it so I would try to make it happen.
CONFIRMED WORKING!
I will not be help responsible if you brick your device or flash this incorrectly and your phone ends up blowing up. You have been warned.
Click to expand...
Click to collapse
NOTE: Because this is not officially signed by Samsung, I believe your flash counter will go up, use Triangle Away to reset your counter!
Huge thanks goes out to @danyvw for picking up my slack, new instructions posted.
Link: https://docs.google.com/file/d/0BxJFwkvU-C2McW5zU0RWQ01hM2s/edit?usp=sharing
1. Download the above .zip file and extract the .tar file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
3. Start Odin
4. Click on the PDA button and browse to the .tar file that you extracted in step 1 and select it
5. DO NOT PUT .PIT FILE AND DO NOT TICK REPARTITION
6. Connect the USB cable and wait for the ID:COM section to turn blue
7. Click start to flash
8. Do not disconnect the cable or turn off the device once the flash has started, it’s going to take some time to flash, when finish exit Odin and disconnect USB.
9. Let the phone start and Voila!!!!!!
theexel said:
Hey there,
I know some people have been requesting this for quite some time! This couldn't have been possible without @techguy1214 so a huge thanks goes out to him!
This is the absolute STOCK M919N Firmware. (THIS IS NOT ROOTED!)
EXPERIMENTAL: This is UNTESTED by me, I compiled this ODIN tar file using the same structure the T-Mobile ODIN File has. I do not have the MetroPCS version of this phone, I have the T-Mobile version. But I figured enough people wanted it so I would try to make it happen.
AGAIN.. THIS MAY NOT WORK.
If it doesn't use the T-Mobile ODIN, it will work, but of course, you will have the T-Mobile Baseband and whatnot, but if it does not work, I will try to work on it again soon!
NOTE: Because this is not officially signed by Samsung, I believe your flash counter will go up, use Triangle Away to reset your counter!
Download the TAR file: https://copy.com/lyMNNbzjaNYm
Click to expand...
Click to collapse
i tired it it worked 100% thanks
techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
No, thank you @techguy1214.
Without you, we wouldn't have these files! :highfive:
What is STOCK M919N ?
Can you elaborate more about the different between this M919N & M919V (as an example):
Can we flash without root ?
Compatibility with what ROM or firmware ?
Report log or advantages...etc.?
Anything more...?
itzik_man said:
Can you elaborate more about the different between this M919N & M919V (as an example):
Can we flash without root ?
Compatibility with what ROM or firmware ?
Report log or advantages...etc.?
Anything more...?
Click to expand...
Click to collapse
M919N is the MetroPCS variant of the Galaxy S4.
M919V is the Wind / Mobilicity / Videotron variant of the Galaxy S4, I believe.
This is for people that maybe messed up flashing a ROM or simply want to go back to barebone OFFICIAL MetroPCS stock firmware due to any reason. (Most likely they broke something and want to send it to warranty, lol.)
techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
any 1 else confirm this....??
djlucklu said:
any 1 else confirm this....??
Click to expand...
Click to collapse
Seems not...
arocker said:
Seems not...
Click to expand...
Click to collapse
Did not work for me. I jumped the gun and flashed a tmo stock rom to see if I could unlock my phone for free. I am unable to flash back to this rom now and can't unlock using a tmo rom.
Can anyone confirm that the pit files are different between the M919 and M919N? I tried a lot of different things last night and I think I flashed the M919 pit file as well as the rom, which is most likely my problem. Odin fails as soon as it tries to write.
Doesn't work
I tried to flash many times with different downloads and always get the same flash error:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NON-HLOS.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I get the exact same error.
downloading now ill let you know
fatalfury said:
downloading now ill let you know
Click to expand...
Click to collapse
Any update fatalfury?
people with errors making sure kies is not open right ? also try the USB port on back of computer and test again
krazierokz said:
people with errors making sure kies is not open right ? also try the USB port on back of computer and test again
Click to expand...
Click to collapse
Is not with Kies, its with Odin. Kies does not have firmware support for the SGH-M91N.
Understood just stating that Odin and kies open together conflicts and Odin won't run right that's all I'm saying
sent from my t mobile S4
Fixing Issues an PLEAS!!!
zbennett15 said:
I get the exact same error.
Click to expand...
Click to collapse
For this you are going to need mobile Odin To Flash an you will need to flash twice after you flash it the first time!:laugh::fingers-crossed:
techguy1214 said:
For this you are going to need mobile Odin To Flash an you will need to flash twice after you flash it the first time!:laugh::fingers-crossed:
Click to expand...
Click to collapse
Same error with PC odin, and when trying to open with mobile odin - partition could not be found.
---------- Post added at 07:20 PM ---------- Previous post was at 06:50 PM ----------
techguy1214 said:
i tired it it worked 100% thanks
Click to expand...
Click to collapse
Hey! how you flashed it? Thanks in advance.
I made some changes to techguy file.Is Working flawlessly with Odin, posted on androidforums:
http://androidforums.com/metropcs-g...t/773372-unofficial-m919nuvuamf2-working.html
danyvw said:
I made some changes to techguy file.Is Working flawlessly with Odin, posted on androidforums:
http://androidforums.com/metropcs-g...t/773372-unofficial-m919nuvuamf2-working.html
Click to expand...
Click to collapse
Updated OP, thank you.
Exel said:
Updated OP, thank you.
Click to expand...
Click to collapse
Thank you! Without your file I wouldn't have done anything. :good:
Hello everyone.
Phone Samsung Galaxy note 2 gt n7105 T mobile UK
So this morning my phone was working fine and while i was playing a game my phone literally just went dead, black screen and then stuck on galaxy note II screen.
So booted into recovery which is Philz touch 4 (had it on there for a few months so cant be more specific)
And i figured i would just do a wipe and reinstall.
But now i cant wipe cache just get error formatting /cache!
So i thought i would try just reinstalling a rom, i was using Jedi x2 rom previously so i went to try installing that, and it started to install then goes blank and reboots back to galaxy note II screen.
rebooted into recovery to check log and i get this.
I : Checking for extendedcommand & OpenRecveryScript..
I ; Skiping execution of extendedcommand. file not found
I : Using /data/media for /sdcard
w : Failed to mount /dev/block/mmcblk0p16 )invalid argument)
I :Skipping execution of OpenRecoveryScript, file not found
E : Cant't open /Cache/recovery/log
E : Cant't open /Cache/recovery/log
E : Cant't open /Cache/recovery/last_lo
E : Cant't open /Cache/recovery/log
So i thought i would just try and install stock rom via odin which failed
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
So now i dont know what to do, is my phone dead?
Please help, i tried to find info on the forums which lead me to try a few of the steps i have tried already and now im really stuck
Was your phone on updated bootloader ?
I notice your phone is N7105 what stock rom did you try to flash ?
Sent from my SGH-T889 using xda app-developers app
Can you attach screenshot with device reboot in download mod?
Sent from my SM-N900 using xda premium
dr.ketan said:
Can you attach screenshot with device reboot in download mod?
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
I have no way of taking a screen shot but ill type what it says there.
ODIN MODE
Product name : GT-N7105
Custom binary download: yes (17 counts)
Current binary: custom
System status : custom
(next 2 lines are in dark grey)
Knox warrenty void: 1
RP SWREV: A2
ciphercodes said:
Was your phone on updated bootloader ?
I notice your phone is N7105 what stock rom did you try to flash ?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Bootloader i think was fairly new, i dont know how often they update them (thats if you mean the philz touch thing?)
As for the rom, i got the lastest from SamMobile but they are classed as EE and not Tmobile ones so its possible thats why i have an issue?
Im a bit of a noob with the way Samsung and roms work. Was no problems with my old HTC.
You will have to download the exact firmware for your device N7105 and flash it using odin.
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
You will have to download the exact firmware for your device N7105 and flash it using odin.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Well i thought i already had what i needed, and since then i have tried a couple older versions too.
Unless im not even getting the correct roms/firmware.
I just get
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In odin.
nollington said:
Well i thought i already had what i needed, and since then i have tried a couple older versions too.
Unless im not even getting the correct roms/firmware.
I just get
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In odin.
Click to expand...
Click to collapse
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
You can also try to flash the using ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
ciphercodes said:
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
Try ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
Click to expand...
Click to collapse
I dont know anything about KIES to be honest.
Ill look for a download of an older odin and try that.
As for the Roms on sammobile, i have been using the UK ones but the ones for EE since EE took over t mobile / orange. It seems thay are the only ones available
So i just found this thread on Kies
http://forum.xda-developers.com/showthread.php?t=2261153
Is this what i should try? i dont want to try it without knowing its what i should be doing.
nollington said:
So i just found this thread on Kies
http://forum.xda-developers.com/showthread.php?t=2261153
Is this what i should try? i dont want to try it without knowing its what i should be doing.
Click to expand...
Click to collapse
Yes.
Remember if your phone can go in to download mode then it can still be recovered, just need to find the right firmware.
ciphercodes said:
Yes.
Remember if your phone can go in to download mode then it can still be recovered, just need to find the right firmware.
Click to expand...
Click to collapse
Ok well so far i cant get odin to install anything. I either get an error after NAND as mentioned previously, or it gets stuck on set up connection.
Possibly a ROM/Firmware issue? but i have tried 3 different ones from sammobile all for EE UK as i cant find specific tmobile anymore.
As for what my phone can do at the moment.
It can boot into Philz touch but will reboot if you do anything like format cache/system/factory reset etc.
And can also put it into download mode with menu + volume down + power.
So i guess ill try that KIES thing and then see what happens.
If you have any other advice for me i would appreciate it.
And also thank you for your help so far
nollington said:
Ok well so far i cant get odin to install anything. I either get an error after NAND as mentioned previously, or it gets stuck on set up connection.
Possibly a ROM/Firmware issue? but i have tried 3 different ones from sammobile all for EE UK as i cant find specific tmobile anymore.
As for what my phone can do at the moment.
It can boot into Philz touch but will reboot if you do anything like format cache/system/factory reset etc.
And can also put it into download mode with menu + volume down + power.
So i guess ill try that KIES thing and then see what happens.
If you have any other advice for me i would appreciate it.
And also thank you for your help so far
Click to expand...
Click to collapse
Since you were using Philz recovery did you take a full back up ? If yes, can you try to restore it ?
If Philz is not responding as it should then try flashing Philz via ODIN.
ciphercodes said:
Since you were using Philz recovery did you take a full back up ? If yes, can you try to restore it ?
If Philz is not responding as it should then try flashing Philz via ODIN.
Click to expand...
Click to collapse
I had made a back up previously (a few months ago) and tried to install that via philz but it wouldnt even read the file.
Also tried to reflash philz via odin and it fails.
And currenctly im having issues with KIES finding my device. It just doesnt seem to want to connect to it.
So i also just saw this while trying to get a backup to work.
E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p13
Error formatting /system!
Im guessing something is pretty corrupt since i cant format cache or system
nollington said:
I had made a back up previously (a few months ago) and tried to install that via philz but it wouldnt even read the file.
Also tried to reflash philz via odin and it fails.
And currenctly im having issues with KIES finding my device. It just doesnt seem to want to connect to it.
Click to expand...
Click to collapse
ok if your trying to install via the KIES software you need to be i download mode not recovery . once your in recovery mode should start seeing your device and start installing drivers or drivers might already be installed and it will ask you for device model number and serial number and will download the current OS and install . i had the same issue as you did and recover my phone via KIES hope this helps
MERK77 said:
ok if your trying to install via the KIES software you need to be i download mode not recovery . once your in recovery mode should start seeing your device and start installing drivers or drivers might already be installed and it will ask you for device model number and serial number and will download the current OS and install . i had the same issue as you did and recover my phone via KIES hope this helps
Click to expand...
Click to collapse
I have been in download mode but KIES wont connect to my phone it just sits on connecting to device for about 10 mins and then says to reboot the device. And then does the same again.
Even tried a different cable and that didnt make any difference.
ciphercodes said:
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
You can also try to flash the using ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
Click to expand...
Click to collapse
I flashed an EE firmware 4.3 over H3G 4.1.2 using old Odin. Works fine but you lose all internal data
Sent from my GT-I9100 using XDA Premium HD app
Im thinking it is a storage problem.
Since im having issues with cache,storage,data formatting.
I read on a thread somewhere i could have to install some .PIT?
Is there anyway to do a kind of full wipe with odin or anything? and then be able to reinstall everything such as partitions?
Those could be really noob things to ask, but im not really much of a "pro" with the phone side of things, just thinking along the lines of regular storage systems being corrupt.
nollington said:
Im thinking it is a storage problem.
Since im having issues with cache,storage,data formatting.
I read on a thread somewhere i could have to install some .PIT?
Is there anyway to do a kind of full wipe with odin or anything? and then be able to reinstall everything such as partitions?
Those could be really noob things to ask, but im not really much of a "pro" with the phone side of things, just thinking along the lines of regular storage systems being corrupt.
Click to expand...
Click to collapse
The last ODIN log you posted shows that it failed while flashing sboot.bin which is the bootloader. I think that was when you tried to flash the older firmwares.
Here is the PIT file for N7105 but I cannot assure if it work or not as I have a different phone SGH-T889.
http://forum.xda-developers.com/showthread.php?t=2137008
I do not think the partition table is messed. I still think flashing the correct firmware via ODIN should get this fixed.
Few other things to try:
You can also flash CF-Autoroot for N7105, it comes with stock recovery and then you can wipe data and perform a factory reset from there.
http://download.chainfire.eu/255/CF-Root/CF-Auto-Root/CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip
You can try flashing TWRP or CWM via ODIN and use then wipe the cache.
Hi peoples of XDA I am in need of an authentic SM-900T 32GB PIT so I can revive my bricked note. I
Have unsuccessfully tried various sources but all of them seam to stem from the same sm9005 version and when I use odin the note rejects
the file and displays a Secure Check Fail in red letters on screen. This makes me believe a t-mobile pit will aid me in my mission of ressurrection.
Thanks to you all.
jub2k3 said:
Hi peoples of XDA I am in need of an authentic SM-900T 32GB PIT so I can revive my bricked note. I
Have unsuccessfully tried various sources but all of them seam to stem from the same sm9005 version and when I use odin the note rejects
the file and displays a Secure Check Fail in red letters on screen. This makes me believe a t-mobile pit will aid me in my mission of ressurrection.
Thanks to you all.
Click to expand...
Click to collapse
Have you tried just flashing the 4.3 or 4.4 tarball?
dragonstalker said:
Have you tried just flashing the 4.3 or 4.4 tarball?
Click to expand...
Click to collapse
Yeah I get a wierd error.
jub2k3 said:
Yeah I get a wierd error.
Click to expand...
Click to collapse
what version of odin are you using, what version of android and filename are you trying to odin, and what is the error?
dragonstalker said:
what version of odin are you using, what version of android and filename are you trying to odin, and what is the error?
Click to expand...
Click to collapse
I used V3 .04 and .07, and both of them give me a Secure Check Failed error in big red bold letters on screen.
I tried 2 seperate files . My_9005.pit & 9005.pit
An image of the error.
Error.
You need to use Odin v9 and the file is about 2.1 GB. Do a google search for the stock firmware and download that (sometimes it comes with Odin automatically) then hit the AP option and find your file.
---------- Post added at 07:41 AM ---------- Previous post was at 07:40 AM ----------
jub2k3 said:
Error.
Click to expand...
Click to collapse
I didn't look at your screen shot, I would first try flashing twrp recovery
Results= No Joy
This is the results of using v3.09 and flashing TWRP.
<ID:0/088> Added!!
<ID:0/088> Removed!!
<ID:0/051> Added!!
<ID:0/051> Odin v.3 engine (ID:51)..
<ID:0/051> File analysis..
<ID:0/051> SetupConnection..
<ID:0/051> Initialzation..
<ID:0/051> Get PIT for mapping..
<ID:0/051>
<ID:0/051> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Noobtoob posted a full how to, with pit included for both heimdall and odin. Check out his post and download from there. I don't want to post his work somewhere else.
http://forum.xda-developers.com/showthread.php?p=47887501 <<<< Original Thread
I bought the phone locally, knowing of the issue. The seller claimed that it worked fine before, but started having this No Singal issue recently. The model of my motherboard is G960F, and right now the android version that's on my S9 is Android Pi; SM-G960U1. My IMEI is there. I am not getting to flash anything because of Qualcomm Secureboot. Any advice given would be appreciated, thanks in advance.
xcodydoe said:
I bought the phone locally, knowing of the issue. The seller claimed that it worked fine before, but started having this No Singal issue recently. The model of my motherboard is G960F, and right now the android version that's on my S9 is Android Pi; SM-G960U1. My IMEI is there. I am not getting to flash anything because of Qualcomm Secureboot. Any advice given would be appreciated, thanks in advance.
Click to expand...
Click to collapse
huh? you cant flash anything in Odin?
youdoofus said:
huh? you cant flash anything in Odin?
Click to expand...
Click to collapse
Nope Says "FAILED" and something about secureboot
xcodydoe said:
Nope Says "FAILED" and something about secureboot
Click to expand...
Click to collapse
did you do a factory reset from recovery with a google account still logged into the phone or something?
youdoofus said:
did you do a factory reset from recovery with a google account still logged into the phone or something?
Click to expand...
Click to collapse
Nope, no google account here
EDIT: I believe it has something to do with the latest security patch and bootloader
xcodydoe said:
Nope, no google account here
EDIT: I believe it has something to do with the latest security patch and bootloader
Click to expand...
Click to collapse
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
youdoofus said:
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
Click to expand...
Click to collapse
Thank you, I'll try that and let you know.
youdoofus said:
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
Click to expand...
Click to collapse
I'm not getting to flash it with Odin. This is the error that I'm getting. http://prntscr.com/p0f5qa
Downloaded the firmware using Frija
youdoofus said:
that doesnt make sense unless youre trying to flash firmware with a bootloader revision prior to the last one that was flashed on your phone. Get the most recent firmware for your specific country here. Use the regular CSC file so that it will completely factory reset your phone and that should fix your issue. Let me know what happens after you flash that. And download it with the Frija tool. Not sure if i mentioned that tool already as i cant see the prior responses when replying and ive mentioned it several times today already lol
Click to expand...
Click to collapse
Tried exactly this and I'm getting this error http://prntscr.com/p2gu5t
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> skip file list for home binary
<ID:0/009> Home Binary Download
<ID:0/009> Total Binary size: 612 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cache.img
<ID:0/009> Complete(Write) operation failed.
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
xcodydoe said:
Tried exactly this and I'm getting this error http://prntscr.com/p2gu5t
<ID:0/009> Added!!
<ID:0/009> Odin engine v(ID:3.1301)..
<ID:0/009> File analysis..
<ID:0/009> skip file list for home binary
<ID:0/009> Home Binary Download
<ID:0/009> Total Binary size: 612 M
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> NAND Write Start!!
<ID:0/009> SingleDownload.
<ID:0/009> cache.img
<ID:0/009> Complete(Write) operation failed.
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you ever used Odin successfully on this computer before?
youdoofus said:
Have you ever used Odin successfully on this computer before?
Click to expand...
Click to collapse
Yeah, when the phone's Android version was at 8
xcodydoe said:
Yeah, when the phone's Android version was at 8
Click to expand...
Click to collapse
then redownload the 4 files, get a new copy of Odin, use a different cable and finally try a different computer if the first 3 didnt work
youdoofus said:
then redownload the 4 files, get a new copy of Odin, use a different cable and finally try a different computer if the first 3 didnt work
Click to expand...
Click to collapse
Can you link the latest version of Odin?
HTML:
xcodydoe said:
Can you link the latest version of Odin?
Click to expand...
Click to collapse
https://odindownload.com/