Develop Bugs

[Q] How to return to stock ROM and Recovery Galaxy Grand i9082

I recently root my Galaxy Grand (thanks to chotu222) and flashed it with k2wl's ROM and are working great.
However, I want to know how can I revert this to its original recovery and ROM that is same as brand new. Just in case for warranty purposes.
I hope someone can help me and guide me.
Thanks!

jadjad said:
I recently root my Galaxy Grand (thanks to chotu222) and flashed it with k2wl's ROM and are working great.
However, I want to know how can I revert this to its original recovery and ROM that is same as brand new. Just in case for warranty purposes.
I hope someone can help me and guide me.
Thanks!
Click to expand...
Click to collapse
just download the firmware from sammobile.com/firmware
flash through odin3 3.04
u get ur stock rom and recovery.

k2wl said:
just download the firmware from sammobile.com/firmware
flash through odin3 3.04
u get ur stock rom and recovery.
Click to expand...
Click to collapse
I have rooted the phone with CWM.
Tried to revert back to stock ROM.
But I am stuck at setup connection in Odin.
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
After this it fails.
Do you have any solution for this.
Does this mean the firmware is locked?
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
Do you have any solution for this

mr_coimbatore said:
I have rooted the phone with CWM.
Tried to revert back to stock ROM.
But I am stuck at setup connection in Odin.
Odin v.3 engine (ID:6)..
File analysis..
SetupConnection..
After this it fails.
Do you have any solution for this.
Does this mean the firmware is locked?
Later I upgraded a custom rom - XXAMD6 on baseband ZNMAMB3.
But the problem now is Radio is switched off. So the mobile is not active.
When I try to make a call it says Flight mode is activated. But really flight mode is switched off.
Do you have any solution for this
Click to expand...
Click to collapse
Before flashing u have to factory reset the phone..
wipe cache and dalvic cache then try again...
Sent from Gt-I9082

rejocie001 said:
Before flashing u have to factory reset the phone..
wipe cache and dalvic cache then try again...
Sent from Gt-I9082
Click to expand...
Click to collapse
Thanks Rejocie.
I did wipe cache, factory reset and dalvic cache.
Result is same.
Still could not flash anything with Odin.

mr_coimbatore said:
Thanks Rejocie.
I did wipe cache, factory reset and dalvic cache.
Result is same.
Still could not flash anything with Odin.
Click to expand...
Click to collapse
Check kies software is running background... If yes,, disable it first.. And also check all the drivers are properly installed.
Sent from Gt-I9082

rejocie001 said:
Check kies software is running background... If yes,, disable it first.. And also check all the drivers are properly installed.
Sent from Gt-I9082
Click to expand...
Click to collapse
I did uninstall Kies and tried (with installing drivers again). But negative result

mr_coimbatore said:
I did uninstall Kies and tried (with installing drivers again). But negative result
Click to expand...
Click to collapse
This one happens to me also at that the data is corrupted... Re download data again and check any issues with usb cable...
Sent from Gt-I9082

rejocie001 said:
This one happens to me also at that the data is corrupted... Re download data again and check any issues with usb cable...
Sent from Gt-I9082
Click to expand...
Click to collapse
I downloaded 3 versions of firmware (India, China and Turkey). But all there failed through Odin. Changed 3 different cable not result.
Also tried to push the modem file through Odin, which also fails.

mr_coimbatore said:
I downloaded 3 versions of firmware (India, China and Turkey). But all there failed through Odin. Changed 3 different cable not result.
Also tried to push the modem file through Odin, which also fails.
Click to expand...
Click to collapse
Please tell me the procedure for installing the rom. Something somewhere is wrong.
Sent from Gt-I9082
---------- Post added at 05:26 PM ---------- Previous post was at 05:22 PM ----------
mr_coimbatore said:
I downloaded 3 versions of firmware (India, China and Turkey). But all there failed through Odin. Changed 3 different cable not result.
Also tried to push the modem file through Odin, which also fails.
Click to expand...
Click to collapse
I think phone boot loader is locked or what. Don't download China firmware. It's totally different all other firmwares.
Sent from Gt-I9082
---------- Post added at 05:27 PM ---------- Previous post was at 05:26 PM ----------
You have to ask experts for this solution....
Sent from Gt-I9082

k2wl said:
just download the firmware from sammobile.com/firmware
flash through odin3 3.04
u get ur stock rom and recovery.
Click to expand...
Click to collapse
Hi, can you please elaborate on this?. In ODIN do I point to the firmware file directly under the PDA section and flash?. Or do I need to extract the firmware file and point to PDA, Bootloader, CSC etc separately to the extracted files?. Please help and explain your suggestion in some more detail. I have rooted and installed CWM. I wish to go back to the stock Android Recovery. I already know the process to UNROOT. Thanks in advance for your help.

Extract the single tar.md5 file and flash thru ODIN
Sent from my GT-N7000 using xda app-developers app

help needed
Me also face the same problem
while flashing through odin the message show that like below
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Kindly help
bongski55 said:
Extract the single tar.md5 file and flash thru ODIN
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse

thanks
Finally i got pass and succeed to install stock rom.. after restart the system and reinstall the kies
Thanks
ebemrlonely said:
Me also face the same problem
while flashing through odin the message show that like below
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Kindly help
Click to expand...
Click to collapse

if still have any issues then :
1. Make sure you should >50% battery
2. Please have enabled USB debugging (All apps > Settings > Manage Applications > Development > USB Debugging – check box)
3. Ensure you have backed up your important data.
4. Install USB drivers on your PC from here.
!!! Press THANKS If Helped !!!

flight mode is on
After installing custom rom Samsung Galaxy Grand Duos i9082 , it is saying flight mode is on. yurn off flight mode to make call.please help ..
i tried with differenr ROMs still same issue.

move your question to new thread brother
asitpanda said:
After installing custom rom Samsung Galaxy Grand Duos i9082 , it is saying flight mode is on. yurn off flight mode to make call.please help ..
i tried with differenr ROMs still same issue.
Click to expand...
Click to collapse
you are in middle of others question, you should move your question to new thread i hope so!!!!

[Q] Can't flash stock rom through Odin, phone only boots in download mode. Help!

I tried to get help through reddit to no avail. My GS3 can only start up in download mode and nothing else works. I have the proper drivers installed on my computer, yet every time I try to flash a stock rom (which I've made sure are for the T-999 model) Odin fails at the NAND write start! part. I tried using the GS3 Toolkit to flash a stock rom but it says I need USB debugging enabled, which I can't enable because my phone doesn't start up in anything but download mode. What do I do?

Pakarido said:
I tried to get help through reddit to no avail. My GS3 can only start up in download mode and nothing else works. I have the proper drivers installed on my computer, yet every time I try to flash a stock rom (which I've made sure are for the T-999 model) Odin fails at the NAND write start! part. I tried using the GS3 Toolkit to flash a stock rom but it says I need USB debugging enabled, which I can't enable because my phone doesn't start up in anything but download mode. What do I do?
Click to expand...
Click to collapse
What was the last thing you did before this happened? Any idea what caused it to not be able to boot normally? How about recovery? Can you get that?
Are you using the USB cable that came with the phone? Try other cables?

DocHoliday77 said:
What was the last thing you did before this happened? Any idea what caused it to not be able to boot normally? How about recovery? Can you get that?
Are you using the USB cable that came with the phone? Try other cables?
Click to expand...
Click to collapse
I have this problem after unrick phone by JTag, can not flash stock rom on T999 after repair boot vby Jtag.
Odin Log:
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> aboot.mbn
<ID:0/017> NAND Write Start!!
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

DocHoliday77 said:
What was the last thing you did before this happened? Any idea what caused it to not be able to boot normally? How about recovery? Can you get that?
Are you using the USB cable that came with the phone? Try other cables?
Click to expand...
Click to collapse
I was trying to get CWM on the phone but it didn't work, and I was stuck with only being able to boot in download mode. I have tried other cables and other computers, no luck. I can't get into recovery mode, only download.

How did you attempt to install cwm? Try flashing only recovery in Odin.
Sent from my SGH-T999L using XDA Premium 4 mobile app

DocHoliday77 said:
How did you attempt to install cwm? Try flashing only recovery in Odin.
Sent from my SGH-T999L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My phone is T999 hard bricked but after repair boot loader by jtag phone able to boot up into Download mode only.
Not able boot into recovery, i tried Flash stock firmware with pit file, it is fail the Odin log said like that.
I tried to flash TWRP succeed but still can not go into TWRP to flash custom rom.
I tried to flash stock kernel and stock recovery after succeed with Odin phone still like that.
Only Boot into Download mode. can not go into recovery or TWRP or OS.
T-Mobile lock bootloader T999 via OTA update like I337 with OTA MF3 update ?
Thanks for help.

DocHoliday77 said:
How did you attempt to install cwm? Try flashing only recovery in Odin.
Sent from my SGH-T999L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Forgive me, I'm new but what do you mean flash only recovery? Please specify.

nguyento1986 said:
My phone is T999 hard bricked but after repair boot loader by jtag phone able to boot up into Download mode only.
Not able boot into recovery, i tried Flash stock firmware with pit file, it is fail the Odin log said like that.
I tried to flash TWRP succeed but still can not go into TWRP to flash custom rom.
I tried to flash stock kernel and stock recovery after succeed with Odin phone still like that.
Only Boot into Download mode. can not go into recovery or TWRP or OS.
T-Mobile lock bootloader T999 via OTA update like I337 with OTA MF3 update ?
Thanks for help.
Click to expand...
Click to collapse
Please just post in the thread you created. No need to post the same thing here too.
Pakarido said:
Forgive me, I'm new but what do you mean flash only recovery? Please specify.
Click to expand...
Click to collapse
You said you tried to install cwm. Cwm is a custom recovery. How did you try installing it? I suggested trying to flash it in Odin by itself.
First, please tell me where you got the cwm recovery, and how exactly did you try to install it?
If your inability to boot normally started after trying to get cwm, ill need to know where you got it and how you tried installing it if I am going to be able to help. Please include a link to the file and any instructions you used.
Sent from my SGH-T999L using XDA Premium 4 mobile app

DocHoliday77 said:
Please just post in the thread you created. No need to post the same thing here too.
You said you tried to install cwm. Cwm is a custom recovery. How did you try installing it? I suggested trying to flash it in Odin by itself.
First, please tell me where you got the cwm recovery, and how exactly did you try to install it?
If your inability to boot normally started after trying to get cwm, ill need to know where you got it and how you tried installing it if I am going to be able to help. Please include a link to the file and any instructions you used.
Sent from my SGH-T999L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried to flash it in Odin, and then it broke. I cant link because I'm a new user but if you copy paste this into Google "CF-Root 6.4 — It’s the New Samsung Galaxy S3 Root Package, Includes CWM 5.5, SuperSU and CWM Manager App" it's the first result, the website is theandroidsoul.com.

Pakarido said:
I tried to flash it in Odin, and then it broke. I cant link because I'm a new user but if you copy paste this into Google "CF-Root 6.4 — It’s the New Samsung Galaxy S3 Root Package, Includes CWM 5.5, SuperSU and CWM Manager App" it's the first result, the website is theandroidsoul.com.
Click to expand...
Click to collapse
Ohh boy!
Did you not read the entire page there? This is mentioned in the main body and also in large italic letters immediately following the article,
"This hack and the guide below are compatible only and only with Galaxy S3, model number i9300. It’s not compatible with other devices. Check your device’s model number in: Settings » About phone."
That is the international model. Ours is not an I9300. Ours is SGH-T999. Flash anything for the I9300/I9305 and you are destined for a hard brick. Yours, while not a total brick due to the fact you can get into download mode, is pretty much in the same boat as the other guy who posted in this thread and started his own. Basically, you probably flashed cwm recovery to a non-recovery partition, and system apps to a non-system partition. The trick is figuring out what partitions you overwrote. Probably ones that are not included in the stock firmware.
You need to find out what partitions hold the System and Recovery on the I9300. (ex. on our phones, System is on mmcblk0p14 and recovery is on mmcblk0p18). if their system is on p7, for example, then you would have flashed apps to our boot/kernel partition. If their Recovery is on p2, then you would have flashed CWM to our SBL1 partition which is not available in the stock firmware. It is possible to also mess up the partion layout this way as well.
If I get the time tonight, I will try to look up some of this for you and the other guy, but I may not be able to help much with this as I've never had to actually perform this kind of fix. I know what needs to be done, just not positive I know how to go about it. I can make very educated guesses, but with stuff like this, if I guess wrong, it could end up a little worse!
I suggest you take the info I just gave to you and do a lot of research. If you want guaranteed results, go to www.mobiletechvideos.com and see what they offer. They are the only ones I have ever seen anyone on this forum report using, and everyone who did was always very happy with their service. There are other shops you can find online that do this type of work, but Ive not seen any others mentioned around here. Not sure about prices either, so its up to you to research all of that type stuff.
In all honesty, I would look into a repair service to see what they can offer price-wise. If its cheap enough, I would seriously consider using them.
Good Luck man! If I can come up with anything, Ill let you know. And if you want me to try to help with actually fixing it after we have more info, I can do my best, but keep in mind you may have to wait until I am freed up enough to focus on it and I will not promise any kind of positive results! Others may reply with more info during the day tomorrow too, so you may also want to wait to see if anyone else has anything to add.

DocHoliday77 said:
Ohh boy!
Did you not read the entire page there? This is mentioned in the main body and also in large italic letters immediately following the article,
"This hack and the guide below are compatible only and only with Galaxy S3, model number i9300. It’s not compatible with other devices. Check your device’s model number in: Settings » About phone."
That is the international model. Ours is not an I9300. Ours is SGH-T999. Flash anything for the I9300/I9305 and you are destined for a hard brick. Yours, while not a total brick due to the fact you can get into download mode, is pretty much in the same boat as the other guy who posted in this thread and started his own. Basically, you probably flashed cwm recovery to a non-recovery partition, and system apps to a non-system partition. The trick is figuring out what partitions you overwrote. Probably ones that are not included in the stock firmware.
You need to find out what partitions hold the System and Recovery on the I9300. (ex. on our phones, System is on mmcblk0p14 and recovery is on mmcblk0p18). if their system is on p7, for example, then you would have flashed apps to our boot/kernel partition. If their Recovery is on p2, then you would have flashed CWM to our SBL1 partition which is not available in the stock firmware. It is possible to also mess up the partion layout this way as well.
Click to expand...
Click to collapse
Jesus I'm lost. I have no idea how to even start going about this. I would greatly appreciate if you can offer any help in your free time, and thank you very much for what you've given me already. Please don't forget about me :crying:

Help! N7105 cant wipe cache or install

Hello everyone.
Phone Samsung Galaxy note 2 gt n7105 T mobile UK
So this morning my phone was working fine and while i was playing a game my phone literally just went dead, black screen and then stuck on galaxy note II screen.
So booted into recovery which is Philz touch 4 (had it on there for a few months so cant be more specific)
And i figured i would just do a wipe and reinstall.
But now i cant wipe cache just get error formatting /cache!
So i thought i would try just reinstalling a rom, i was using Jedi x2 rom previously so i went to try installing that, and it started to install then goes blank and reboots back to galaxy note II screen.
rebooted into recovery to check log and i get this.
I : Checking for extendedcommand & OpenRecveryScript..
I ; Skiping execution of extendedcommand. file not found
I : Using /data/media for /sdcard
w : Failed to mount /dev/block/mmcblk0p16 )invalid argument)
I :Skipping execution of OpenRecoveryScript, file not found
E : Cant't open /Cache/recovery/log
E : Cant't open /Cache/recovery/log
E : Cant't open /Cache/recovery/last_lo
E : Cant't open /Cache/recovery/log
So i thought i would just try and install stock rom via odin which failed
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
So now i dont know what to do, is my phone dead?
Please help, i tried to find info on the forums which lead me to try a few of the steps i have tried already and now im really stuck

Was your phone on updated bootloader ?
I notice your phone is N7105 what stock rom did you try to flash ?
Sent from my SGH-T889 using xda app-developers app

Can you attach screenshot with device reboot in download mod?
Sent from my SM-N900 using xda premium

dr.ketan said:
Can you attach screenshot with device reboot in download mod?
Sent from my SM-N900 using xda premium
Click to expand...
Click to collapse
I have no way of taking a screen shot but ill type what it says there.
ODIN MODE
Product name : GT-N7105
Custom binary download: yes (17 counts)
Current binary: custom
System status : custom
(next 2 lines are in dark grey)
Knox warrenty void: 1
RP SWREV: A2

ciphercodes said:
Was your phone on updated bootloader ?
I notice your phone is N7105 what stock rom did you try to flash ?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Bootloader i think was fairly new, i dont know how often they update them (thats if you mean the philz touch thing?)
As for the rom, i got the lastest from SamMobile but they are classed as EE and not Tmobile ones so its possible thats why i have an issue?
Im a bit of a noob with the way Samsung and roms work. Was no problems with my old HTC.

You will have to download the exact firmware for your device N7105 and flash it using odin.
Sent from my SGH-T889 using xda app-developers app

ciphercodes said:
You will have to download the exact firmware for your device N7105 and flash it using odin.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Well i thought i already had what i needed, and since then i have tried a couple older versions too.
Unless im not even getting the correct roms/firmware.
I just get
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In odin.

nollington said:
Well i thought i already had what i needed, and since then i have tried a couple older versions too.
Unless im not even getting the correct roms/firmware.
I just get
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
In odin.
Click to expand...
Click to collapse
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
You can also try to flash the using ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.

ciphercodes said:
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
Try ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
Click to expand...
Click to collapse
I dont know anything about KIES to be honest.
Ill look for a download of an older odin and try that.
As for the Roms on sammobile, i have been using the UK ones but the ones for EE since EE took over t mobile / orange. It seems thay are the only ones available

So i just found this thread on Kies
http://forum.xda-developers.com/showthread.php?t=2261153
Is this what i should try? i dont want to try it without knowing its what i should be doing.

nollington said:
So i just found this thread on Kies
http://forum.xda-developers.com/showthread.php?t=2261153
Is this what i should try? i dont want to try it without knowing its what i should be doing.
Click to expand...
Click to collapse
Yes.
Remember if your phone can go in to download mode then it can still be recovered, just need to find the right firmware.

ciphercodes said:
Yes.
Remember if your phone can go in to download mode then it can still be recovered, just need to find the right firmware.
Click to expand...
Click to collapse
Ok well so far i cant get odin to install anything. I either get an error after NAND as mentioned previously, or it gets stuck on set up connection.
Possibly a ROM/Firmware issue? but i have tried 3 different ones from sammobile all for EE UK as i cant find specific tmobile anymore.
As for what my phone can do at the moment.
It can boot into Philz touch but will reboot if you do anything like format cache/system/factory reset etc.
And can also put it into download mode with menu + volume down + power.
So i guess ill try that KIES thing and then see what happens.
If you have any other advice for me i would appreciate it.
And also thank you for your help so far

nollington said:
Ok well so far i cant get odin to install anything. I either get an error after NAND as mentioned previously, or it gets stuck on set up connection.
Possibly a ROM/Firmware issue? but i have tried 3 different ones from sammobile all for EE UK as i cant find specific tmobile anymore.
As for what my phone can do at the moment.
It can boot into Philz touch but will reboot if you do anything like format cache/system/factory reset etc.
And can also put it into download mode with menu + volume down + power.
So i guess ill try that KIES thing and then see what happens.
If you have any other advice for me i would appreciate it.
And also thank you for your help so far
Click to expand...
Click to collapse
Since you were using Philz recovery did you take a full back up ? If yes, can you try to restore it ?
If Philz is not responding as it should then try flashing Philz via ODIN.

ciphercodes said:
Since you were using Philz recovery did you take a full back up ? If yes, can you try to restore it ?
If Philz is not responding as it should then try flashing Philz via ODIN.
Click to expand...
Click to collapse
I had made a back up previously (a few months ago) and tried to install that via philz but it wouldnt even read the file.
Also tried to reflash philz via odin and it fails.
And currenctly im having issues with KIES finding my device. It just doesnt seem to want to connect to it.

So i also just saw this while trying to get a backup to work.
E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p13
Error formatting /system!
Im guessing something is pretty corrupt since i cant format cache or system

nollington said:
I had made a back up previously (a few months ago) and tried to install that via philz but it wouldnt even read the file.
Also tried to reflash philz via odin and it fails.
And currenctly im having issues with KIES finding my device. It just doesnt seem to want to connect to it.
Click to expand...
Click to collapse
ok if your trying to install via the KIES software you need to be i download mode not recovery . once your in recovery mode should start seeing your device and start installing drivers or drivers might already be installed and it will ask you for device model number and serial number and will download the current OS and install . i had the same issue as you did and recover my phone via KIES hope this helps

MERK77 said:
ok if your trying to install via the KIES software you need to be i download mode not recovery . once your in recovery mode should start seeing your device and start installing drivers or drivers might already be installed and it will ask you for device model number and serial number and will download the current OS and install . i had the same issue as you did and recover my phone via KIES hope this helps
Click to expand...
Click to collapse
I have been in download mode but KIES wont connect to my phone it just sits on connecting to device for about 10 mins and then says to reboot the device. And then does the same again.
Even tried a different cable and that didnt make any difference.

ciphercodes said:
Your phone is on the 4.3 bootloader, do not try to flash older 4.1.x firmwares they are going to fail.
Did you try emergency recovery using KIES ?
You can also try to flash the using ODIN v 1.85.
I see that stock ROMS for N7105 on sammobile are region specific, I am not sure if flashing a ROM of incorrect region with fail but try to download the one for your region.
Click to expand...
Click to collapse
I flashed an EE firmware 4.3 over H3G 4.1.2 using old Odin. Works fine but you lose all internal data
Sent from my GT-I9100 using XDA Premium HD app

Im thinking it is a storage problem.
Since im having issues with cache,storage,data formatting.
I read on a thread somewhere i could have to install some .PIT?
Is there anyway to do a kind of full wipe with odin or anything? and then be able to reinstall everything such as partitions?
Those could be really noob things to ask, but im not really much of a "pro" with the phone side of things, just thinking along the lines of regular storage systems being corrupt.

nollington said:
Im thinking it is a storage problem.
Since im having issues with cache,storage,data formatting.
I read on a thread somewhere i could have to install some .PIT?
Is there anyway to do a kind of full wipe with odin or anything? and then be able to reinstall everything such as partitions?
Those could be really noob things to ask, but im not really much of a "pro" with the phone side of things, just thinking along the lines of regular storage systems being corrupt.
Click to expand...
Click to collapse
The last ODIN log you posted shows that it failed while flashing sboot.bin which is the bootloader. I think that was when you tried to flash the older firmwares.
Here is the PIT file for N7105 but I cannot assure if it work or not as I have a different phone SGH-T889.
http://forum.xda-developers.com/showthread.php?t=2137008
I do not think the partition table is messed. I still think flashing the correct firmware via ODIN should get this fixed.
Few other things to try:
You can also flash CF-Autoroot for N7105, it comes with stock recovery and then you can wipe data and perform a factory reset from there.
http://download.chainfire.eu/255/CF-Root/CF-Auto-Root/CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip
You can try flashing TWRP or CWM via ODIN and use then wipe the cache.

Galaxy Note II Stuck on System in Odin

<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
My Galaxy Note II has been stuck on this for a while. I was trying to recover it via kies but it never worked so i tried out the Odin and this happened..
Please show me to any tutorial or post below a tutorial.

Katrxc said:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
My Galaxy Note II has been stuck on this for a while. I was trying to recover it via kies but it never worked so i tried out the Odin and this happened..
Please show me to any tutorial or post below a tutorial.
Click to expand...
Click to collapse
You working???
Lots of info is missing for anyone to help you....
Who is your network carrier? What did you try to flash? What version of ODIN....
If you are on ATT this may help
http://forum.xda-developers.com/showthread.php?t=2589891

Redownload the rom file. The cheesy sites developers use to host their roms are sketchy at best, and at worst they give you an incomplete file.

rangercaptain said:
Redownload the rom file. The cheesy sites developers use to host their roms are sketchy at best, and at worst they give you an incomplete file.
Click to expand...
Click to collapse
But he's using ODIN.... So he's flashing firmware.

Every ROM is firmware amigo. If the firmware is in a zip file set up for TWRP or CWR, good. If its in the tar format we use Odin3.
If you look inside the zip file it has a tar file in it.

rangercaptain said:
Every ROM is firmware amigo. If the firmware is in a zip file set up for TWRP or CWR, good. If its in the tar format we use Odin3.
If you look inside the zip file it has a tar file in it.
Click to expand...
Click to collapse
:
Uh yea,,,,
Senior Member
Thanks Meter 682
Posts: 1,584
Join Date: Sep 2010
I may be slightly familiar with the process and the difference.
I was pointing out the fact that it is failing while flashing with ODIN...
So your comment that
"The cheesy sites developers use to host their roms are sketchy at best, and at worst they give you an incomplete file."
was probably not relevant in this case, since 99.969% of the free ROMs that devs freely build and graciously host on free sites, are not flashed in ODIN.

Only 682? Thats pretty weak amigo. Since 2010? You're so new you glow! I don't know what your malfunction is.
Samsung is a ROM/firmware developer. And Samfirmware.com (or whatever its called) is a sometimes spotty site.
The advice is still the same:
1. Redownload
2. Use the factory cable
3. Use the powered usb port
4. Use another version of Odin3.

rangercaptain said:
Only 682? Thats pretty weak amigo. Since 2010? You're so new you glow! I don't know what your malfunction is.
Samsung is a ROM/firmware developer. And Samfirmware.com (or whatever its called) is a sometimes spotty site.
The advice is still the same:
1. Redownload
2. Use the factory cable
3. Use the powered usb port
4. Use another version of Odin3.
Click to expand...
Click to collapse
No problem here slick. Yep having a life is rough.
I guess I would have to agree that a download of the stock ROM firmware from sammobile.com (which is not actually associated with the ROM/firmware developer Samsung) (http://www.sammobile.com/about-us/) would be a good idea, and then flash via ODIN.
Vice a download of a Dev ROM that perhaps an XDA developer posted on a cheesy site, which I mistaken thought you were implying.
That is why I posted the simple glowing statement, but it's an ODIN flash. Didn't expect a ROM flash 101 class.

Attack the OP's problem, not members who contribute solutions.
All you have done here was try to show everyone you're the smartest guy in the room.
Run along now.

rangercaptain said:
Attack the OP's problem, not members who contribute solutions.
All you have done here was try to show everyone you're the smartest guy in the room.
Run along now.
Click to expand...
Click to collapse
Respectfully, that's what I was trying to do, by asking questions. Like what were they trying to flash.
Then you jumped in and suggested to redownload, Without ensuring they were even flashing the right thing.
I have seen you give out great advice. That's why this seemed odd.

99% of the times a flash fails in Odin3 or recovery its because of a file error. If it was the wrong file for the phone it would flash and brick or it would stop immediately. But since he got most of the way through the process, I concluded correct file but likely corrupt download.
But you already know this.
---------- Post added at 01:49 PM ---------- Previous post was at 01:44 PM ----------
I actually made up the 99%, but its most of the time.

[Q] S3 will not get past Samsung Animation

My girlfriend installed an OTA update and after install, it got past the Samsung screens then goes black and seemingly turns off. I have tried flashing several stock and rooted roms from XDA verified developers. I tried initially flashing CF-Auto-Root, it flashed successfully but no change in symptoms. The other stock ones I've tried same up as invalid or failed the flash. Any other ideas on this? Any help is appreciated.

Are you running the latest TWRP or CWM? What errors are you getting when the custom ROM fails?

I had two galaxy s3's AT&T both got an update
yesterday both got stuck in ATT logo boot loop
saying updating then failed but, recovery is unable
to launch the only thing usable was odin mode.
There is no stock firmware to fix it. I would bet
its the same issue.

audit13 said:
Are you running the latest TWRP or CWM? What errors are you getting when the custom ROM fails?
Click to expand...
Click to collapse
When trying to flash the rooted version, I'm getting this
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Should I check the 'Nand Erase All' option within Odin?

nightsbird said:
I had two galaxy s3's AT&T both got an update
yesterday both got stuck in ATT logo boot loop
saying updating then failed but, recovery is unable
to launch the only thing usable was odin mode.
There is no stock firmware to fix it. I would bet
its the same issue.
Click to expand...
Click to collapse
Sounds like AT&T goofed their update

***UPDATE***
After a lot of work, I not got it to boot, but now it's saying there's no sim card in it. Is this a modem issue?

What rom did you install? The aboot.mbn error tells me you were flashing a rom in Odin that was trying to downgrade the bootloader which cannot be done.
What modem and bootloader are on your phone?

audit13 said:
What rom did you install? The aboot.mbn error tells me you were flashing a rom in Odin that was trying to downgrade the bootloader which cannot be done.
What modem and bootloader are on your phone?
Click to expand...
Click to collapse
Honestly, I'm unsure on either. Is there a way I can figure out what bootloader I have? If I can figure that out I think I can get it from there.

I just got same problem todat. I have been using stock 4.3 room rooted. Now I can't pass samsung animation . I can enter only to download mod. I'm gonna try install another room by odin.
---------- Post added at 07:06 PM ---------- Previous post was at 06:16 PM ----------
So right now I can't even stand in download mod Deveci keep restarting him self even in the download mod. If there is anyone who got deal with it before please help us.

***UPDATE***
After a lot of work, I not got it to boot, but now it's saying there's no sim card in it. Is this a modem issue?
What did you do to get it to boot?

Dante411 said:
Honestly, I'm unsure on either. Is there a way I can figure out what bootloader I have? If I can figure that out I think I can get it from there.
Click to expand...
Click to collapse
I would install the latest philz for the d2lte and cm10.2 to see if the sim
is detected.

audit13 said:
I would install the latest philz for the d2lte and cm10.2 to see if the sim
is detected.
Click to expand...
Click to collapse
I'll see what I can find. Link?

I still can't pass the animation. it's restrarting even in download mod so I can't try anything by odin, what should I do guys?

Dante411 said:
I'll see what I can find. Link?
Click to expand...
Click to collapse
Link to Philz: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
CM11: https://download.cyanogenmod.org/?device=d2lte

audit13 said:
Link to Philz: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
CM11: https://download.cyanogenmod.org/?device=d2lte
Click to expand...
Click to collapse
The Philz link didn't work. Also that cyanogenmod link, is that supposed to be a custom recovery or is that just the mod?
EDIT: Just kidding, the link worked now
***UPDATE***
While trying to install the cm-11-20141120-NIGHTLY-d2lte.zip
Finding update package....
Opening Update Package....
Installing update....
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E:Error in /storage/sdcard1/cm-11-20141120-NIGHTLY-d2lte.zip
Any ideas on what that 'incompatible data' would be?
*******UPDATE*******
Nevermind, just wiped cache and it worked. Booting..
While installing CyanogenMod it came up with 'Insert SIM card'. This SIM has been tested in another phone and is working in another phone. Note that it does not explicitly tell me that I am not on a wireless network or that SIM is missing other than the initial setup. Does CyanogenMod flash a modem with it's package?

dcr4m said:
I still can't pass the animation. it's restrarting even in download mod so I can't try anything by odin, what should I do guys?
Click to expand...
Click to collapse
I would try flashing the two things he recommended. that seems like it would get you past boot. However it sounds like your phone may be in a slightly different situation since mine is not rebooting in recovery/download mode.

Cm11 does not flash a modem or bootloader.
What bootloader is on your phone?

audit13 said:
Cm11 does not flash a modem or bootloader.
What bootloader is on your phone?
Click to expand...
Click to collapse
I've been asked this before and I'm not sure how to figure that out. If you tell me how I'll certainly figure it out.

Can you boot into cm11 or any rom? If you can and your rom is rooted, download and install the samsung info app from the play store, run it, and make note of the modem and bootloader.

audit13 said:
Can you boot into cm11 or any rom? If you can and your rom is rooted, download and install the samsung info app from the play store, run it, and make note of the modem and bootloader.
Click to expand...
Click to collapse
I'm having issues downloading anything in Cyanogenmod. Doesn't have the google play store installed.