Welcome to Elite Kernels. One is for Sense based 4.4.3 roms, one for GPE 4.4.4 roms, & one for AOSP 4.4.4 roms. There are two variations of sense, one with OC/UC and one with stock clock slots.
I originally started this kernel , Brymaster5000 now maintains this thread.
Additional Features are as follows:
- CPU OC and UC 162-2106
- ROW, SIO, ZEN, FIOPS, and VR schedulers
- OnDemand, Performance, Power Save, Intelliactive, Intellidemand, Intellimm, Optimax, Smartmax, and Lionheart Governors
- Max Screen Off CPU Frequency
- Advanced TCP Congestion controls
- Fast Charge
- GPU OC/UC with steps of 128, 200, 320, 400, 450, and 487
- Faux Sound Control
- User Space Voltage control
- Thermal Control by crpalmer
- Intelliplug HotPlug alternative
- Screen Wake options: Sweep2Wake, DoubleTap2Wake, Logo2wake, pocket detection,flick2wake, pick2wake and Logo2Menu
- Cpu stats enabled
- FS encryption disabled to allow system r/w
- Many performance patches to memory management and fs control
- ZRAM/ZCACHE/Swap
- LZ4 Compression
- Kexec Hardboot
- Linaro 4.9.2 arm cortex a15 with 02 optimization
- Simple GPU governor
Elite Lunar Kernel for Sense 4.4.3
Sense 443 - OLD Gestures (no xposed):
OC/UC - Elite_Kernel-12_31_2014
StockClock - Elite_Kernel-12_31_2014-stockclk
Sense 443 - NEW Gestures (xposed):
OC/UC - Elite_Kernel-12_31_2014-gest
StockClock - Elite_Kernel-12_31_2014-gest-stockclk
Elite Lunar Kernel for GPE 4.4.4
OC/UC - Elite_Lunar_GPE_Kernel-08_26_2014
StockClock - Elite_Lunar_GPE_Kernel-08_26_2014-stock_clk
Elite Kernel for AOSP - CM based ROMs
Elite-AOSP_kernel-11_17_2014
Elite Kernel - stock with wake features only
Elite_m7_Kernel-11_08_2014
Please notify me if you are going to use this kernel in your ROM
Sense 4.4.3 Source
GPE 4.4.4 Source
CM 4.4.4 Source
XDA:DevDB Information
Elite Lunar Kernels, Kernel for the Verizon HTC One
Contributors
buckmarble, brymaster5000
Source Code: https://github.com/Buckmarble/Elite_Lunar_kernel
Kernel Special Features: S2W, L2M,DT2W,OC,UC, Fast Charge, Custom Voltage, Performance Tweaks
Version Information
Status: Stable
Created 2014-01-02
Last Updated 2014-12-31
Reserved
Change Log
01/02/2014
- added faux gamma control
- SLIMbus freq tweaks to give max audio potential. Compliments zeroinfinity audio mod very well
01/04/2014
- reverted faux gamma control
01/08/2014 to 01/11/2014
- added fstrim support to updater
- enabled SElinux security at the kernel level NOTE: selinux stays will still report disabled if the ROMs ramdisk is insecure.
01/26/2014
-Disabled Perf-Lock
Reserved
Thanks for posting a thread on your kernels. FYI, your download links need tweaked.
Yes, a big thanks to @hawknest for coming to me to get kit Kat sense booting. You guys wouldn't have it right now if he did not start this excursion. It was fun and challenging to get it to work without proper source.
And even more thanks to @buckmarble for his know how. I wouldn't have been able to do this on my own.
Sent from my ecliptic one.
download links are fixed
I have used both of these kernels in the past couple weeks and have had great luck along with literally all day battery life and a benchmark of 28951!
Thanks for all your hard work and for providing it to the verizon HTC One community
eyetek said:
I have used both of these kernels in the past couple weeks and have had great luck along with literally all day battery life and a benchmark of 28951!
Thanks for all your hard work and for providing it to the verizon HTC One community
Click to expand...
Click to collapse
I am happy to hear you are enjoying it! On a side note we have been seeing benchmarks upward of 31500 on the over clock version.
Awesome finally a custom kernel for GPE Running great so far for me, Im on Joel's GPE ROM. Noticed a small issue on the OC version, max CPU clock doesnt seem to stick, tried via trickster and shell, it keeps reverting to the max 2.1ghz, I was trying to set it a bit lower to 1.9ghz.
SellswordShev said:
Awesome finally a custom kernel for GPE Running great so far for me, Im on Joel's GPE ROM. Noticed a small issue on the OC version, max CPU clock doesnt seem to stick, tried via trickster and shell, it keeps reverting to the max 2.1ghz, I was trying to set it a bit lower to 1.9ghz.
Click to expand...
Click to collapse
use the lock frequency feature in trickster right above the frequency selections to make them stick.
Sorry to be that guy but anyone have some recommended settings? I'm on the gpe overclocked version.
I flashed this last night on the Viper rom. Turned on smartmax governor and can already see a big improvement in battery life. Thanks to all involved.
Sent from my HTC6500LVW using Tapatalk
To the kernel Dev(s) this is running great on hawks sprint ROM thanks!! I also have a question about the kernel. Is it possible to add this feature because I use zeroinfinity sound mod and this is suppose to compliment it...
poondog said:
Overclocked slimbus to max. This is as high as it goes, its 100% stable in testing with no negative impacts. Brings improvements all around for audio playback etc (thx to @ZeroInfinity and me )
.Some generic function optimizations (for faster kernel, better battery.. overall improvements to the code, from CAF)
.Add USB Fast Charge (Flar, Motley, Chad Froebel for original mod)
What is this slimbus OC about?
It will really start to take advantage of the hardware of this phone, as well as the audio improvements in the ERA sound mod. Hopefully it will open the door to more stuff that was previous restricted
Thanks! Have fun
Click to expand...
Click to collapse
Cj719 said:
To the kernel Dev(s) this is running great on hawks sprint ROM thanks!! I also have a question about the kernel. Is it possible to add this feature because I use zeroinfinity sound mod and this is suppose to compliment it...
poondog said:
Overclocked slimbus to max. This is as high as it goes, its 100% stable in testing with no negative impacts. Brings improvements all around for audio playback etc (thx to @ZeroInfinity and me )
.Some generic function optimizations (for faster kernel, better battery.. overall improvements to the code, from CAF)
.Add USB Fast Charge (Flar, Motley, Chad Froebel for original mod)
What is this slimbus OC about?
It will really start to take advantage of the hardware of this phone, as well as the audio improvements in the ERA sound mod. Hopefully it will open the door to more stuff that was previous restricted
Thanks! Have fun
Click to expand...
Click to collapse
can you link me to the mod?
Click to expand...
Click to collapse
Any chance of you including faux's gamma control?
Sent from my HTC6500LVW using Tapatalk
fatmando2 said:
Sorry to be that guy but anyone have some recommended settings? I'm on the gpe overclocked version.
Click to expand...
Click to collapse
I prefer battery savings and responsiveness, so using smartmax governor with row scheduler, -25000 under volt (this can probably go lower). OC min freq set to 216000. Heres some knowledgeable guesses I am testing out for the governor:
awake_ideal_freq = 486000
boost_freq = 1728000
ramp_up_step = 400000
suspend_ideal_freq = 378000
touch_poke_freq = 1728000
trying to lower the idle sleep frequencies, but boost up faster and higher when you are using the phone (touching button / screen)
see governor source comments if you want to learn more about the parameters https://github.com/Buckmarble/elite.../drivers/cpufreq/cpufreq_smartmax.c?source=cc
edit: been stable across a variety of use for me so far, hopefully will also see battery savings later, if you notice any trouble let me know
Bout Damn time lol
Sent From My Dark EclipticONE
I've been running 12/30 for a few days oc , no issues fast and battery efficient . Could you add a few features such as faux sound and color control?
axeldiks1 said:
I've been running 12/30 for a few days oc , no issues fast and battery efficient . Could you add a few features such as faux sound and color control?
Click to expand...
Click to collapse
faux sound already in it. Read OP. I will look into the color control and i am looking into a few other mods as well
http://forum.xda-developers.com/showthread.php?p=49047610
Sent from my HTCONE using xda app-developers app
Related
SG-NS-ICS Kernel
Here is what's included in the kernel:
Tweaks:
- Boot @ 1.1Ghz Overclock (Bus 220MHZ)
- 1320 Mhz overclock
- Undervolted to maximize battery life
- Kernel updated to 3.0.22 (new)
- Cold colors
- Cpuidle backport from 3.2 Kernel
- Ext4 and IO tweak backports from 3.2 Kernel
- CIFS Module built-in
- init.d support
- USB On the GO! Build5
- Wifi PM_FAST for faster screen off download speed and compatibility
- Increased refresh rate --> ** Only in HIGH_HZ version **
Governors:
- Ondemand
- Conservative - Default
- Performance
- Lazy
- Smartassv2
- Lulzactivev2
IO Schedulers:
- CFQ - Default
- Noop
- Deadline (tweaked for flash devices)
- VR
- Simple IO
Mods:
- Voodoo Sound V10
- BIGMEM for more available memory
- Backlight Notification
- Backlight Dimmer
- Battery Life Extender
- TouchWake
- Custom voltage
Rules and FAQs
Read before downloading
(Note: I don't wanna be rude, I just want to keep this thread clean...)
Q: What settings do you recommend? What governor? What IO Scheduler?
A: I recommend the default settings. This is why it there by default!
Click to expand...
Click to collapse
Q: My phone as rebooted on its own or is stuck on a reboot loop.
A: There are 3 reason why your phone may reboot on its own:
1. Your phone does not handle the Undervolt of the kernel
Flash the stock voltage add-on. (NO I will not make the kernel with stock voltage by default)
2. Your phone cannot handle the Overclock of the kernel
Use another kernel, Sorry...
3. There is a bug in the kernel and I should fix it:
Post the /proc/last_kmsg output as a ZIP in the thread. BUT, before posting make sure the last_kmsg contains the mention "Kernel panic", if not, don't bother posting this because your problem is related to point 1 or 2...A kernel Panic looks like this:
Code:
[ 4079.850240] Kernel panic - not syncing: Fatal exception
[ 4079.850307] Backtrace:
[ 4079.850504] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
[ 4079.850568] r7:00000005 r6:d6b3a600 r5:c0707990 r4:c0741068
[ 4079.850905] [] (dump_stack+0x0/0x1c) from [] (panic+0x7c/0x1a8)
[ 4079.851022] [] (panic+0x0/0x1a8) from [] (die+0x1a4/0x1d8)
Click to expand...
Click to collapse
Q: Why did you remove feature X?
A: Because I think it sucks
* This is my personal opinion and I am allowed to have it
Click to expand...
Click to collapse
Q: Can you add feature X?
A: Depends. Before asking that question, check the changelog.
If it was removed, NO.
* If you have a really good reason why you think a feature should come back from the dead, you can defend your case by PM.
If it's a new feature that I may not know about, just let me know of the feature and I'll consider it.
If its a new shinny CPU governor or IO scheduler, NO the ones that will remain do the job perfectly...
Click to expand...
Click to collapse
Q: What does feature X do?
A: Please try Google or Wikipedia before asking this. The answer is at the tip of your finger tips
Click to expand...
Click to collapse
DownloadsStable Kernels:
SG-NS-ICS_27022012.zip
SG-NS-ICS_27022012_HIGH_HZ.zip
SlimSG_08032012_FS.zip (FileSync Enabled - Safer)
SlimSG_09032012_NoFS.zip (FileSync Disabled - Faster)
Experimental:
* None *
Kernel Add-ons: **Flash in CWM after the kernel.
SG-NS-ICS_StockVoltageMod.zip (new)
SG-init.d-installer
Old kernels:
SlimSG_29022012.zip
SG-NS-ICS_05022012.zip
SG-NS-ICS_05022012_HIGH_HZ.zip
SG-NS-ICS_31012012.zip
SG-NS-ICS_31012012_HIGH_HZ.zip
SG-NS-ICS_14012012.zip
SG-NS-ICS_14012012_HIGH_HZ.zip
SG-NS-ICS_17012012.zip
SG-NS-ICS_17012012_HIGH_HZ.zip
Apps:
Manage this kernel with NSTOOLS. Thx arifhn!
To get USB-OTG working you need USB Host Controller app installed. Thx sztupy!
Thanks to ezekeel, supercurio, morfic, franciscofranco, sztupy, reddv1 and koush which made this kernel possible.
kernel source
Change log:
SlimSG_09032012_NoFS.zip
- Removed FileSync (Faster IO)
- Kernel 3.0.23
- Bring back UV
SlimSG_08032012_FS.zip
- Enabled FileSync (Safer IO)
- Kernel 3.0.23
- Bring back UV
SlimSG_29022012.zip
- Release Slim version of SG kernel. This version is whatever setting I'm running at the moment and everything else removed...
SG-NS-ICS_27022012.zip and SG-NS-ICS_27022012_HIGH_HZ.zip
- Kernel Update to 3.0.22
- Fixed SmartassV2 Sysfs Interface
- Fix in Custom Voltage
SG-NS-ICS_05022012.zip and SG-NS-ICS_05022012_HIGH_HZ.zip
- Kernel Update to 3.0.19
- Use PM_FAST power saving method for WIFI to get Higher throughput and better compatibility.
SG-NS-ICS_31012012.zip and SG-NS-ICS_31012012_HIGH_HZ.zip
- Removed useless Governors
- Removed useless IO Scheduler
- Tuned down conservative and ondemand for better battery life
- Kernel upgrade to 3.0.18
- Updated USB-OTG to Build5
SG-NS-ICS_24012012-NoFSYNC.zip and SG-NS-ICS_24012012_HIGH_HZ-NoFSYNC.zip
- Added V(r) IO Scheduler
- Tweaked deadline IO for flash devices
- Tweaked conservative governor
- IO backport from 3.2
- ext4 backport from 3.2
- ext4 tweaks
- optimized sha1, memcopy, string libs
- TCP tweaks
- Added USB-OTG
- and more ...
SG-NS-ICS_17012012.zip and SG-NS-ICS_17012012_HIGH_HZ.zip
- New CPU Governors: Lagfree, MinMax, Smartassv2, InteractiveX and Lulzactivev2
New Add-on 17012012
- Change boot script to use stock voltage instead of Undervolt. *Requires busybox to be installed
SG-NS-ICS_14012012.zip and SG-NS-ICS_14012012_HIGH_HZ.zip
- Removed GPU OC since it doesn't do anything
- Made init.d support built-in
* Note: You need to have busybox installed for init.d to work. Look for the busbox installer app in the market.
New Add-on 13012012
- Adds init.d support to the kernel
SG-NS-ICS_12012012.zip and SG-NS-ICS_12012012_alternate.zip
- Kernel 3.0.17
- Experimenting with GPU Overclock (now at 250Mhz instead of 200Mhz)
SG-NS-ICS_11012012_alternate.zip
- Include increased refresh rate
- Should have more washed out colors
SG-NS-ICS_11012012.zip
- Back to cold colors
- Remove increase refresh rate, cause colors to look washed out
- Still has the 1320 Mhz
SG-NS-ICS_10012012.zip
- Added Test Voodoo color with green flicker fix
- Added 1320Mhz overclock
SG-NS-ICS_09012012.zip
- Updated kernel to 3.0.16
- Added Cpuidle backport from 3.2 kernel
SG-NS-ICS_06012012.zip
- Remove readahead because it was causing slow down in the UI
- Adjusted OnDemand governor to make it snappier
- Fix to cpufreq to make it more statble
- Added Simple IO scheduler
- Made colors 8500K instead of 6500K
** Note: This kernel is a lot faster than previous ones
SG-NS-ICS_04012012.zip
- BLN
- BLD
- BLX
- TouchWake
- Custom Voltage
- CIFS
- Adjusted Ondemand governor default values
SG-NS-ICS_03012012.zip
** Initial Release **
- 1.1Ghz Overclock
- UV
- Lazy governor
- BFQ v3r1 IO Scheduler
- Voodoo Sound V10
- BIGMEM
- Kernel 3.0.15
- 65 FPS
- 1024K Memory Readahead
Awesome Kernel !!!
But I would love to see the 100% charge mod.
jalexishg said:
Awesome Kernel !!!
But I would love to see the 100% charge mod.
Click to expand...
Click to collapse
It's there .... 100% Battery Mod - commit log
Solid kernel!
Gonna try this out right now.
Edit: Voltages must be too low for my phone. Getting reboots.
Oh man. I just got settled with this stock kernel. Now this new kernel comes. lol I hate having the crack flash urge.
astaccz said:
Oh man. I just got settled with this stock kernel. Now this new kernel comes. lol I hate having the crack flash urge.
Click to expand...
Click to collapse
It's better than stock
Better battery life and faster!
downloading now, no sense trying to resist feeding my crack flashing addiction...
sent from my ns4g running aosp oicsv43 via xda app
steve.garon said:
It's there .... 100% Battery Mod - commit log
Click to expand...
Click to collapse
Not working with NSTools, only showing 96% try to move it to 100% and stay stuck on 96%, any idea ?
I cant resist it either. Flashed it gonna let it settle in and check the performance once I fully charge it again.
Any thoughts on the comparison of CFQ and BFQ?
Nice!!!!
Sent from my Nexus S 4G using xda premium
Could not adjust colors via voodoo
°•neXus S4G•°
jalexishg said:
Awesome Kernel !!!
But I would love to see the 100% charge mod.
Click to expand...
Click to collapse
wow....But anyways thanks for bringing your goodness to us NS4G users Steve. I look forward to using this as my daily driver kernel now
jalexishg said:
Not working with NSTools, only showing 96% try to move it to 100% and stay stuck on 96%, any idea ?
Click to expand...
Click to collapse
100% battery mod is a cosmetic fix. BLX will never go over 96%. If you do go over 96%, you'll damage your battery...
FL0OD said:
Could not adjust colors via voodoo
°•neXus S4G•°
Click to expand...
Click to collapse
I'm using a cold color mod instead of voodoo colors. Voodoo color was never actually an 100% completed project. Because of the green flicker issue, voodoo color was not included in the kernel. Pawitp from team hacksung seems to be working on an alternative to voodoo color for the GalaxyS. I might try that in future release...
I'm aiming for a really stable kernel. Only features that I know work and that work well will go in.
Breaks USB tether
This kernel breaks USB tether. I am using CM 9 alpha 19 with Glados 2.7. Switched back to Glados and USB tether works again.
Downloaded and flashed. Seems to be running good. Showing benchmark scores only slightly behind other kernels running 1300/1400mhz.
Thanks for posting this up. I like it!
DaytonaDU said:
This kernel breaks USB tether. I am using CM 9 alpha 19 with Glados 2.7. Switched back to Glados and USB tether works again.
Click to expand...
Click to collapse
Good to know... I've never tried USB tether. I'll check that out for next release.
steve.garon said:
Good to know... I've never tried USB tether. I'll check that out for next release.
Click to expand...
Click to collapse
USB tether works for me kinda of slow but it works
Sent from my Nexus S 4G using xda premium
simonb255 said:
USB tether works for me kinda of slow but it works
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Wifi hotspot is far better than USB tether IMHO... I'll test both later.
[font=verdana,geneva,sans-serif]Nyan Kernel Tuna[/font]
By Marcusant
________________________________________________________________________________________________________
Info
________________________________________________________________________________________________________
Source: http://github.com/ma...t/Nyan-Tuna-JB/
Nyan Colonel was originally created for the Epic 4G as an effort to bring all of the features from other Hummingbird devices to the Epic. Now I have used my upgrade on a Galaxy Nexus and have been trying many different kernels and every one seems to have some features and be missing others. I have attempted to add as much features I can while still keeping the kernel lean and fast with great battery life. This does not require you to be some crazy linux enthusiast in order to modify, or charge you for an app capable of tuning it. It comes with the trickstermod app in order to tweak the kernel to your needs in case the preset settings don't fit your user type.
If you need help, feel free to gtalk me, I don't bite (most of the time): [email protected]
Also, if you feel I have helped, up my rep or even donate
________________________________________________________________________________________________________
Features
________________________________________________________________________________________________________
Bold = Default
CPU Governors
PegasusQ - A mix of performance and battery life that hotplugs the cpu at low use
Interactive - Boosts frequency based on load put on by the user. Modified to also boost on touch of the screen.
Ondemand - Basic scale on demand governor with no hotplugging
HotplugX - Ondemand modified to hotplug at low use and screen off
Wheatley - Basically ondemand (scales depending on demand) that is modified for performance
Lazy - Basically conservative (scales gradually depending on load) that is modified for performance
Schedulers
SIO - A mix of NOOP and Deadline made for flash memory, like the GNex has
BFQ - Currently experimental. For heavy IO load
CFQ - Attempts to distribute the disk fairly among processes
Deadline - Imposes a deadline on processes to prevent lack of resources
NOOP - Simplest scheduler. Good for flash memory.
CPU Frequencies (MHz)
230, 384, 729, 1030, 1228, 1305, 1420, 1536, 1612, 1728, 1804
GPU Frequencies (MHz)
Set by running: echo # > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
echo 0 = 308MHz
echo 1 = 384
echo 2 = 512
If you don't like using command lines, you can edit the gpu_oc file with es file explorer and change it from 0 to 1 or 2
Misc Features
Feature - Default Setting
Max Screen Off - 384000
Read Ahead Buffer Size - 2048
TCP Congestion Control - cubic
Wifi High Performance - off
Fast Charge - off
High Performance Sound - off
Vibrator Strength - 1400
Battery Life Extender - 100
FSYNC Control - off
Temperature Limit - 64
SmartReflex - All options ON
Voltage Control (too much to list, just screenshot before changing)
Gamma Control - -10
Contrast Control - 6
Color Settings - Default preset
Compiled with Linaro's GCC 4.7
Fixes, speed enhancements, security enhancements, Linux updates, and battery enhancements
________________________________________________________________________________________________________
Credits
________________________________________________________________________________________________________
Koush - "Any Kernel" on-phone boot.img repack
bigeyes0x0 - his free kernel mod app
Ezekeel - All of his fantastic mods and govs I used in Nyan
FranciscoFranco - Speed tweaks and other patches
Linux Contributers - A ton of patches from newer versions of Linux, etc.
Red Hat Linux Developers - A ton of patches
Imoseyon - Patches, governors, etc
Everyone else who I forgot
________________________________________________________________________________________________________
Changelog
________________________________________________________________________________________________________
Rel5
Improved responsiveness
Improved battery life
Updated net drivers
Fixed interactive lag
Added interactive touch boost
Updated to the latest 3.0.x kernel
Filesystem optimizations
Much more
[/LIST]
________________________________________________________________________________________________________
Downloads
________________________________________________________________________________________________________
Latest Version - http://marcusant.com...-Tuna-Rel5.zip
All versions (older/unreleased) - http://marcusant.com/nyankernel/tuna/
Great..new kernel.
Sent from my Galaxy Nexus using xda premium
I hate to do this, but... bump
Sent from my Galaxy Nexus using Tapatalk 2
looks very nice, definitely will try this. thanks.
great kernel!!!!
Always room for a new kernel. Thank you sir!
Galaxy Nexus HSPA+
i`m looking forward to a new build with PGM support!
Been running this kernel all day and its been working great. Can't wait for future updates to the kernel!
Sent from my Galaxy Nexus using xda premium
Really a smooth performer, people should really look in to this kernel needs to be more popular than it is ...
Let me try this
would you be so kind as to include trinity contrast?
Coming from other kernel such as franco/trinity, with their own ramdisks. Do I have to reflash my rom to get it's ramdisk before flashing this kernel? Or does it comes with it's own tweaked ramdisk?
Hate to do this also but bump, anyone can answer me?
Found my own answer after some search!
AnyKernel is a template for an update.zip that can apply any kernel to any ROM, regardless of ramdisk.
koush-AnyKernel. AnyKernel is a template for an update.zip that can apply any kernel to any ROM, regardless of ramdisk
been using this kernel for a day, meanwhile it looks pretty battery friendly. thaks for the good work.
un.droid said:
been using this kernel for a day, meanwhile it looks pretty battery friendly. thaks for the good work.
Click to expand...
Click to collapse
smooth in performance? like butter?
to be honest, ive never met a combination of JB+any kernel that wasnt smooth. so yeah, this kernel is smooth i say give it a try.
Took the plunge to flash it, don't really like it. No way to adjust colour setting? The default pre-set were well above the safety limit.
i like the default colors, they look real, not too saturated or faded.
un.droid said:
i like the default colors, they look real, not too saturated or faded.
Click to expand...
Click to collapse
Anyway to adjust the colors? Like via app? Or the kernel doesn't support color adjustment just yet?
Sent from my Galaxy Nexus using xda premium
kashix said:
Anyway to adjust the colors? Like via app? Or the kernel doesn't support color adjustment just yet?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
This kernel supports adjustment in almost everything. It's one of the most user friendly kernels out. Please read the OP and learn how to.....
Sent from my Galaxy Nexus using Xparent Red Tapatalk 2
Sorry but I've flashed it and tried adjustments with trickster. There's no options to adjust colors. I'm really sorry if I'm missing out anything.
Sent from my Galaxy Nexus using xda premium
FEATURES FOR 4.2.2:
Code:
-Built from CM10.1 sources
-Built using Linaro 4.7.4 toolchain
-Overclocked to 1620Mhz
-Underclocked to 270Mhz
-faux sound is here
-Undervolted and support for user undervolting
-Added Governors
+intellidemand
+badass
+wheatley
+smartassH3
+asswax
+smartmax
-Added IO Schedulers
+sio
+tripndroid
+fifo
-thalmus hot plugging (mpdecision is disabled by default for 4.2.2)
-fast charge support
-frandom support
FEATURES FOR 4.3:
Code:
-Built with latest CM10.2 sources
-latest linux 3.4.65
-Compiled with Linaro 4.8.2
-Overclocked to 1620Mhz
-Underclocked to 270Mhz
-fast charge support
-faux sound support
-CM cherrypick to prevent battery drain (thanks for finding it pwncake)
-Added Governors
+intellidemand
+badass
+wheatley
+smartassH3
+asswax
-Added IO Schedulers
+sio
+tripndroid
+fifo
-thalmus hot plugging
-frandom support
-undervolting and user undervolting (minimum is 900, anything below this won't change anything)
-modified colors (sort of like trinity but my modifications)
-gpu OC to 480
This rom currently supports the Trickster Mod App - get it here https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
This rom is meant for AOSP 4.2.2 and 4.3 depending on which download you grab and what ROM you use. Do not mix the kernel, you assume the risks of your stupidity if you don't read the OP.
PM me if you need any help starting up your own kernel
BDownloads for 4.3:
BionicSheep2v0.7.1_RC2
BionicSheep2v0.6.0_RC1
BionicSheep2v0.5.5
BionicSheep2v0.5.1
Downloads for 4.2.2:
BionicSheepv0.3.8_RELEASE_6
READ THIS PLEASE:
Everyone, sorry to disappoint but this kernel is now dead. Due to a serious serious issue with the git client, me trying to delete 1 repo caused the deletion of my kernels repo instead. There will be no builds anymore, I would have to start from scratch and I do not remember every line of code I have changed for the past 4 months.
My sincerest apologies to you guys, I am still shocked myself right now, I can't believe it did that.
I will keep downloads up for now but I doubt the kernel will work bug free into the future without keeping up with driver updates and such. If there are any GPL concerns from any mods here on xda, please let me know and I will take the links down. I had source up until it got deleted. Thanks for the help, experience, and the times guys. You made this kernel a wonderful learning experience for me. Look out for my app in the next few months guys, its my new project if git doesn't screw me on that too.
My settings:
Gov: asswax
IO: row
Read ahead: 1024
Voltages: (stock, I pick them in the first place )
GPU: 480
Powersaving: 0
Mpdecision: its gone so enabling it does nothing
Sources:
https://github.com/BionicSheep/android_kernel_samsung_d2.git
Special thanks to:
ahagersr - for getting me started up and giving me hours of reading material
stratatak7 - for helping with packaging and voltage fixes
gideonX - for his patience and willingness to answer my nooby questions
pwncake193 - for helping me with 4.3 sources and kernel start up for it (send him thanks guys)
ktoonsez - for his patience and willingness to answer my nooby questions
imoseyon - fastcharge
TripNRaVeR - for his IO scheduler
faux123 - for his awesome sound support
the community - help in general
Changelog
Code:
10.07.2013 RC2
-fix all the bugs!
10.06.2013 Experimental Release
-Hopefully fixed random reboots (you tell me)
-Linux 3.4.65 updates
-cm updates
-clock changes
-GPU overclocking to 480, if you think its useless, don't tell me, just turn it off, my testing proves otherwise
-updates deadline scheduler to have 0ms latency (credits to imoseyon)
10.03.2013 Release Candidate
-cm updates
-asswax tunables adjusted to personal preference. Ramps up slower but also ramps down slower, also focuses on lower
clocks at screen up and deep sleep. Check the git if you're curious
-Linaro 4.8.2 instead of 4.7 used to compile
-Latest linux 3.4.64
-378 clock changed back to 384 (so much more stable and battery friendly)
-voltage adjustments
[COLOR="Red"]This is probably my last build for this phone, when the Nexus 5 comes out I will probably get it and sell my gs3, so if the
price is less than $350, this will be it guys. Thanks for testing as I made my first kernel. I learned a lot! If any huge issues
present themselves I will obviously update it.
4.2.2 is being worked on, but my tester has to get back to me on the latest build (I run 4.3 personally) and then I will upload!
[/COLOR]
09.25.2013
-cm updates
-bluetooth updates
-basically update the everything
-linux updated to 3.4.61 (x.62 will be implemented soon hopefully
-modified clocks a bit to try and get better stability
-sorry updates have been slow (school and all), I am planning on getting a nexus 5 on release so prepare for a potential stop on this kernel for the gs3 when that happens (sorry)
08.23.2013
-tweaked sheep colors a bit and colors look whiter than ever!!
-voltage tweaks (again)
-smartmax governor added(info on it [URL="http://forum.xda-developers.com/showpost.php?p=38193047&postcount=6943"]here[/URL])
08.22.2013
-trying to fix various bugs
-linux 3.4.59 update
08.20.2013b(4.3)
-torch is done! Finally figured out what was going wrong
08.20.2013(4.3)
-linux 3.4.58 updates
-latest cm sources
-fixed torch
-bionicsheep colors should be implemented on boot (no yellow tint)
-voltage tweaks
08.15.2013(4.3)
-rebased from cm so latest drivers and merges
-linux 3.4.57 updates
-upped voltages on overclock so this should fix reboots for some people
-code clean ups
-modified screen colors, its like trinity but my tweaks.
I tried to make colors less saturated and cool the colors
(to enable for now just switch the screen temp (to any option)
in the advanced settings and lock your device,
I will enable on boot if you guys like it)
-so with new drivers this build tends to produce graphical
glitches on older versions of ROMS (pwncakes latest build has been
tested and works)
-old versions of the kernel also no longer play nice with new versions of ROMS
08.12.2013(4.3)
-fixed reboots for some people (I wasn't able to get it to reboot so
hopefully this works for you guys, let me know if it doesn't)
-undervolting finally is here and stable!
-user undervolting is back (min is 850 so going lower is pointless)
-it seems smoother than normal
08.11.2013(4.3) Part 2
-forgot to include frandom module in last build its here now
-you should see some performance improvements especially if you
use things like the crossbreeder mod
08.11.2013(4.2.2)
-frandom support
-clock changes
08.11.2013 (4.3)
-faux sound has returned
-Stable underclocking to 270 (whooooo)
-Stable overclocking to 1620 (WHOOOO)
-frandom support
-easter egg
-mpdecision disabled and removed on boot
-latest cm sources merged
08.10.2013 (4.3) Part 2
-think I fixed hot plugging (confirmed)
08.10.2013 (4.3)
-rebased with latest cm sources
-added thalamus auto hot plugging and double checked its working
-added governors:
+asswax
+wheatley
+badass
+smartassh3
+intellidemand
-added IOSched:
+tripndroid
+fifo
+sio
08.09.2013 (4.2.2)
-fixed hot plugging so that it actually shuts down the second core
-mpdecision is removed since hot plugging works now so you don't have to change a thing
08.06.2013 (4.2.2)
-thalamus hotplugging
-fifo scheduler
-easter egg (you will see when you boot)
08.05.2013
-initial 4.3 build
08.03.2013
-Fixed user voltage scaling
-[COLOR="Red"]Faux Sound[/COLOR] support for those who were asking for it
08.02.2013
Added some governors and IO schedulers per request:
-smartassH3 Governor
-asswax Governor
-wheatley Governor
-tripndroid IO Scheduler
08.01.2013
-Initial Release
Give me an hour or two and I'll post some feedback
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
crashpsycho said:
Give me an hour or two and I'll pohavest some feedback
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man. Much appreciated. Like I said, let me know if you have any requests
Downloading this shiz right now. Yay for new kernels. :highfive::good:
So it looks like if you flash over Ktoonz the tweaker box will stay there which is fine.... I must say coming from any reboot I've never seen where a kernel loads up widgets and everything so fast... nice work on that
Responce wicked fast, deep sleeps better than my snoring wifey,
Small querks I've noticed upon flash there is a lag switching pages and responce is slow I've noticed that you can get SOD I'm running at 15xx to 16xx to test high CPU, and that once SOD is in.place Battery Pull require. But works very well
Request, savage zen& zen, Wheatley, smartassh3, Lionheart would be great but very stable kernel so far Big Props!
Edit : running Liquid smooth 2.9
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
crashpsycho said:
So it looks like if you flash over Ktoonz the tweaker box will stay there which is fine.... I must say coming from any reboot I've never seen where a kernel loads up widgets and everything so fast... nice work on that
Responce wicked fast, deep sleeps better than my snoring wifey,
Small querks I've noticed upon flash there is a lag switching pages and responce is slow I've noticed that you can get SOD I'm running at 15xx to 16xx to test high CPU, and that once SOD is in.place Battery Pull require. But works very well
Request, savage zen& zen, Wheatley, smartassh3, Lionheart would be great but very stable kernel so far Big Props!
Edit : running Liquid smooth 2.9
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
When you first flash, you will have lag for a minute or two but then after that it is gone. Idk if I can fix this, but I will look into it. Hmmmmm, haven't gotten any sleep of death yet. What governor are you running? I would recommend asswax since it is just the smartest in my opinion. Also what was your minimum clock? This could cause SOD. Thanks for the help and I will have those governors for you on the next build (shouldn't be long, hell I might be up tomorrow morning)
EDIT: I will try raising the voltages on my underclock and see if that works. For future reference I run this on CM just for smoothness, but I will try testing on LS when I get a chance
aeppacher said:
When you first flash, you will have lag for a minute or two but then after that it is gone. Idk if I can fix this, but I will look into it. Hmmmmm, haven't gotten any sleep of death yet. What governor are you running? I would recommend badass since it is just the smartest in my opinion. Also what was your minimum clock? This could cause SOD. Thanks for the help and I will have those governors for you on the next build (shouldn't be long, hell I might be up tomorrow morning)
EDIT: I will try raising the voltages on my underclock and see if that works. For future reference I run this on CM just for smoothness, but I will try testing on LS when I get a chance
Click to expand...
Click to collapse
His device may not be able to handle UV. I've been booted for almost 30 minutes now with no issues. I've left it stock so far so I will change to badass and see if it happens. So far though smooth as hell.
For reference, I am on Carbon 1.8 Stable.
phoenix2217 said:
His device may not be able to handle UV. I've been booted for almost 30 minutes now with no issues. I've left it stock so far so I will change to badass and see if it happens. So far though smooth as hell.
For reference, I am on Carbon 1.8 Stable.
Click to expand...
Click to collapse
Glad you like, any requests welcome, I want to make this a bit of a rom for the community
aeppacher said:
Glad you like, any requests welcome, I want to make this a bit of a rom for the community
Click to expand...
Click to collapse
As the above poster requested, savagezen is nice. Not sure if it's been ported to 3.4 yet though. Asswax is also nice.
As for IO Sched, there is an awesome one for a T-Mobile kernel to check out. tripndroid iosched by TripNRaVeR. Very smooth with no noticeable drain.
Link to the kernel is here: http://forum.xda-developers.com/showthread.php?t=2301896&page=4
aeppacher said:
When you first flash, you will have lag for a minute or two but then after that it is gone. Idk if I can fix this, but I will look into it. Hmmmmm, haven't gotten any sleep of death yet. What governor are you running? I would recommend badass since it is just the smartest in my opinion. Also what was your minimum clock? This could cause SOD. Thanks for the help and I will have those governors for you on the next build (shouldn't be long, hell I might be up tomorrow morning)
EDIT: I will try raising the voltages on my underclock and see if that works. For future reference I run this on CM just for smoothness, but I will try testing on LS when I get a chance
Click to expand...
Click to collapse
actually my setting were at 1512-1620 intellidemand/sio for testing, UV ive never had any problem and i didnt change the voltage setting , does this kernel support FastCharge ran Fastcharge toggle on trickster and it didnt stick for some reason, so far ive left everything the same 918-1620 with interactive/row and no issues, but ill keep testin
phoenix2217 said:
As the above poster requested, savagezen is nice. Not sure if it's been ported to 3.4 yet though. Asswax is also nice.
As for IO Sched, there is an awesome one for a T-Mobile kernel to check out. tripndroid iosched by TripNRaVeR. Very smooth with no noticeable drain.
Link to the kernel is here: http://forum.xda-developers.com/showthread.php?t=2301896&page=4
Click to expand...
Click to collapse
I'll get right on that
aeppacher said:
I'll get right on that
Click to expand...
Click to collapse
You da man. :highfive::good:
crashpsycho said:
actually my setting were at 1512-1620 intellidemand/sio for testing, UV ive never had any problem and i didnt change the voltage setting , does this kernel support FastCharge ran Fastcharge toggle on trickster and it didnt stick for some reason, so far ive left everything the same 918-1620 with interactive/row and no issues, but ill keep testin
Click to expand...
Click to collapse
hmmm :/ fast toggle working here with trickster mod. Make sure the phone is unplugged. Then toggle fast charge on. And then you should be able to plug it in. Fast charge won't work if its plugged in.
crashpsycho said:
So it looks like if you flash over Ktoonz the tweaker box will stay there which is fine.... I must say coming from any reboot I've never seen where a kernel loads up widgets and everything so fast... nice work on that
Responce wicked fast, deep sleeps better than my snoring wifey,
Small querks I've noticed upon flash there is a lag switching pages and responce is slow I've noticed that you can get SOD I'm running at 15xx to 16xx to test high CPU, and that once SOD is in.place Battery Pull require. But works very well
Request, savage zen& zen, Wheatley, smartassh3, Lionheart would be great but very stable kernel so far Big Props!
Edit : running Liquid smooth 2.9
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Check out the new update! Added some of your requests (wheatley and smartassh3)
phoenix2217 said:
As the above poster requested, savagezen is nice. Not sure if it's been ported to 3.4 yet though. Asswax is also nice.
As for IO Sched, there is an awesome one for a T-Mobile kernel to check out. tripndroid iosched by TripNRaVeR. Very smooth with no noticeable drain.
Link to the kernel is here: http://forum.xda-developers.com/showthread.php?t=2301896&page=4
Click to expand...
Click to collapse
I added tripndroid and asswax
Holy crap. You're a machine. Flashing this right now. :thumbup:
Sent from my SGH-I747 using xda premium
Looks great! I'll flash this soon. Glad to see you made so much progress.
Sent from my SAMSUNG-SGH-I747
Thanks for sharing your work with us!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Does this have faux sound support?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
x10user2011 said:
Does this have faux sound support?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Not yet man, I'll take that as a request though. If I can figure out how to implement it, I will surely do so
Moved it into my Rom Thread
Vision Kernel for CyanogenMod 12.1
fast - smooth - battery friendly
Features
Hotplug
MpDecision (optimized)
IntelliPlug 4.0
Thermal
My own Thermal Driver (for this time but not the end)
CPU
Underclock CPU to 268MHz
Overlock CPU to 3072MHz (only OC Edition)
Hardlimit CPU Control 2.2 (only OC and NOC Edition)
CPU Boost (only AUX Edition)
MSM Turbo (like Intel Turbo Boost - only active if you use max freq from kernel)
Voltage Control
more CPU Governor
GPU
Underclock GPU to 166MHz (only OC Version)
Overclock GPU to 800MHz (only OC Version)
Simple GPU Algorithm
Adreno Idler
more GPU Governor
Idle down to 27MHz
Screen
Touch Control (DT2W, S2W)
LCD Notifier / State Notifier
FS and I/O
Dynamic Fsync
more IO Scheduler
Optimized EXT4
Power
Powersuspend 1.7
Fastcharge 1.2
Power effient workqueue
Arch Power
Sound
Faux Sound Control
MSM Ultrasound
Stereo call recording
Net
more TCP Cong
Misc
KSM
Kernel Mode NEON
Kali Nethunter Support
SELinux permissive
overall Optimizations
vfp Hardfloat
Sabermod 4.9.3 for A15 and graphite
more...
oc = CPU and GPU OC | noc = no OC | aux = no OC + with CPU Boost
Download
XDA:DevDB Information
Vision Kernel Rebased | fast - smooth - battery friendly, Kernel for the Samsung Galaxy Note 4
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium/android_kernel_samsung_trlte
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: 3.0
Stable Release Date: 2015-06-29
Created 2015-06-02
Last Updated 2015-07-05
Changelog
3.2
Thermal Driver update to make it cool
3.1
add my own Thermal Driver
remove IntelliThermal
remove CPU Boost - we have Hardlimit Control with Boost
some fixes
3.0
MSM Turbo added (like Intel Turbo Boost - only active if you use max freq from kernel)
LCD Notifier added
State Notifier added
Set Andreno Idler to use State Notifier Suspend and Powersuspend
Touch Control added (DT2W, S2W)
some KGSL Patches
2.0
fixed the CPU freq bootup problem
removed some boost features from samsung - i think Hardlimit Control can do this
mpdecision updated
I/O scheduler tuned a bit
faster wakeup from suspend (about 80%)
1.0
rebased with features above
Misc
How-To install
remove all bootup settings from Fauxclock
boot into recovery
install kernel
wipe cache (better to do this)
boot system
if system is fully started - restart it again
done
FAQ
How can i set the kernel features?
The recomend app is FauxClock. Other apps can have problems with cpu freq setting or other features.
Fauxclock isn't supported.
Install Fauxclock > Open and accept SuperSu > force close it > open again (if this isn't working, you need to fix permissions.)
Why i do this? ETA's?
It's only build for my own use, so i update it if i think i must do it. Please do not ask for ETA's.
Misc
Known bugs
If you found a bug, please submit it here.
Feature Requests
If you want to have a new Feature, please submit it here.
Reviews
If you like my work, please say THANKS and write a short review here.
Can't wait to test it out, nice work :good:
Can one OC on this kernel? Thanks!
iGordy101 said:
Can one OC on this kernel? Thanks!
Click to expand...
Click to collapse
no that's the only thing that never come into this kernel. the device is hot and fast enough.
Firstly, thanks for releasing this. Really appreciated.
Any chance of adding Kali Nethunter support? I do some pen testing and would love to be able to use it.
happytomato said:
Firstly, thanks for releasing this. Really appreciated.
Any chance of adding Kali Nethunter support? I do some pen testing and would love to be able to use it.
Click to expand...
Click to collapse
U need patch for cyanogenmod to use kali. So support is not useless.
Is this for qualcomm or exynos?
3473 said:
Is this for qualcomm or exynos?
Click to expand...
Click to collapse
Qualcomm.
Sent from my SM-N910F using XDA Premium 4 mobile app
Have the Kernel intelli thermal?
I didn't tweak anything (just installed the kernel) and my phone feels a lot smoother, thanks!
blackline2008 said:
Have the Kernel intelli thermal?
Click to expand...
Click to collapse
vision_0.29 has intelli_thermal 3.0
Thanks for it. ☺
EDIT
Hello, until now the kernel is running smoothly.
Only when I activate "GPU Thermal Control" the device reboots.
It doesnt work in aicp ROM
blackline2008 said:
Thanks for it.
EDIT
Hello, until now the kernel is running smoothly.
Only when I activate "GPU Thermal Control" the device reboots.
Click to expand...
Click to collapse
i look into it, the next days.
rafik25 said:
It doesnt work in aicp ROM
Click to expand...
Click to collapse
it is build with CM12.1 ramdisk. so the only rom that will work everytime is CM12.1. all other not supported by me. i build it for my own but thought i can share it with the community.
Interesting project, will download & see how it goes :beer:
Was mpdecision removed in favour of better battery life?
AuxXxilium said:
vision_0.29 has intelli_thermal 3.0
Click to expand...
Click to collapse
Intelli thermal causes a reboot on my phone when it gets hot enough to activate. I've never managed to make it work on note 4 though. This kernel sleeps so well. So much better than anything else. Great work. Keep it coming!
Sent from my SM-N910F using Tapatalk
notegalaxy said:
Intelli thermal causes a reboot on my phone when it gets hot enough to activate. I've never managed to make it work on note 4 though. This kernel sleeps so well. So much better than anything else. Great work. Keep it coming!
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
does it work or have you random reboots with intelli thermal?
notegalaxy said:
Intelli thermal causes a reboot on my phone when it gets hot enough to activate. I've never managed to make it work on note 4 though. This kernel sleeps so well. So much better than anything else. Great work. Keep it coming!
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
Bro what's your kernel configuration settings?
Hello everyone i would like to share with you my draft project.Its a CM based kernel for nougat roms.
Why release?
Because i wanted to share my work with community.The more toys we got,the more fun we have
Based on ?
Kernel is based on CM 14.1 kernel with some additions.
Kernel editor?
I do NOT include any editor to zip file yet.its just an image file inside a flashable zip.
Bugs?
Yea...surely got.u better tell me
Works on ?
It is supposed to work on every S4 variant that was able to run CM13/14.1 nightly rom.Also it should work on any CM based ROM
This kernel or alucard on JDCTeam roms?
Surely alucard.This kernel is made for fun and for test.Noone could be compared to grandmaster alucard
Features:
Based on CM kernel
Updated since Dec 8 of CM upstream
Built with pure linaro 4.9
3.4.110 kernel base
Swipe to Sleep feature
(Swipe from right(back) softkey to left(menu) softkey-horizontically)
Intelli-plug Hotplug, MPDecision disabled
Updated Interactive CPU Governor from @Temasek's Hlte kernel
Updated CPU boost driver from @Temasek's Hlte kernel
ROW I/O Scheduler set by default
CPU Voltage Control
Dynamic Fsync toggle (disabled by default)
Power Efficient Workqueues for powersaving
Reduced bcmdhd wakelock
Enabled Fast Charge
Add Overclock/UnderClock options
Disabled CRC
Default governorarkness
Multi Core power saving option(Disabled by default)
Enabled Async
GPU OC(ALREADY ENABLED.KEEP IN MIND TO CHANGE IT IF YOU WANT)
Decreased touch boost by half
Modified Ramdisk
Push cpu on boot
I/O schedulers:
noop
row
cfq
bfq
Governors:
Wheatley
userspace
smartassH3
powersave
ondemand
interactive
dancedance
conservative
badass
asswax
adaptive
abyssplug
darkness
performance
Click to expand...
Click to collapse
Thats all
Download:https://www.androidfilehost.com/?w=files&flid=139640
Sources:
Kernel:https://github.com/dkati/SideCore-CM-SGS4
Ramdisk:https://github.com/JDCTeam/android_device_samsung_jf-common/commits/opt-cm-14.1-sidecore
Thanks to:
alucard_24
xsynergy510x
ktoonsez
Googymax
Feel free to report me any bug .Keep in mind that i am not a kernel developer....But..our s4 is sadly dying....i want to give whatever i can to :highfive:
XDA:DevDB Information
[Kernel][7.1.x][CM/LineageOS based]SideCore-SGS4, Kernel for the Samsung Galaxy S4
Contributors
side
Kernel Special Features:
Version Information
Status: Beta
Created 2016-12-28
Last Updated 2019-01-20
Changelog:
[23-08][11-07]
Added tripndroid IO sched
Added exFAT driver
[23-12][09-07]
Fully rebased source code
Faux sound edits
Stability on some commits
Custom kernel adiutor fork
Built with Linaro TC specially made for S4-jf
Support GCC6
Big upstream merge
Disable OC/UC
Default governor is interactive
io sched to 1024
Reduced swappiness to 40
enable early_suspend and dynamic fsync,by default
Fix fast charge
Reduce sleep time timeout
Optimize KSM to gain battery life
TC Flags ( O3 and more)
Safetynet stuff
Allow undervolt
Intelliplug as default hotplug
Old changelogs
20170209 build
Add/Fix ZEN io scheduler
GPU OC edits
Build ramdisk with LZMA compression
f2fs edits from upstream
set touch boost ms to 10
Reduce CPU0 freq after boot
20161228
Based on CM kernel
Updated since Dec 8 of CM upstream
Built with pure linaro 4.9
3.4.110 kernel base
Swipe to Sleep feature
(Swipe from right(back) softkey to left(menu) softkey-horizontically)
Intelli-plug Hotplug, MPDecision disabled
Updated Interactive CPU Governor from @Temasek's Hlte kernel
Updated CPU boost driver from @Temasek's Hlte kernel
ROW I/O Scheduler set by default
CPU Voltage Control
Dynamic Fsync toggle (disabled by default)
Power Efficient Workqueues for powersaving
Reduced bcmdhd wakelock
Enabled Fast Charge
Add Overclock/UnderClock options
Disabled CRC
Default governorarkness
Multi Core power saving option(Disabled by default)
Enabled Async
GPU OC(ALREADY ENABLED.KEEP IN MIND TO CHANGE IT IF YOU WANT)
Decreased touch boost by half
Modified Ramdisk
Push cpu on boot
I/O schedulers:
noop
row
cfq
bfq
Governors:
Wheatley
userspace
smartassH3
powersave
ondemand
interactive
dancedance
conservative
badass
asswax
adaptive
abyssplug
darkness
performance
Click to expand...
Click to collapse
forgot to mention...
I DO NOT CARE
FOR BURNT DEVICES
FOR BRICKED STUFF
FOR BOOTLOOPS
IF YOUR PARENTS DO NOT LOVE YOU
flash it with your own risk!
Thx i will try today
Nice kernel, but you could reduce the frequency of gpu for the fourth step? 600MHz is too much because there is a lot of glitches and artifacts (on my s4) , and I was forced to use 360mhz. I think that was the optimal frequency to 500MHz. But I see a big potential in this kernel. Thanks for your work. Regards
Thanks for the initiative, the only kernel I found for s4 was on android 5.1.1. I'm very confident that you will do a great job. Testing here to give feedback
Yes i have problem with the 600mhz with the GPU... If i reduce ti 360 NP at all
Anyway love this kernel
Best governator?
Inviato dal mio Pixel XL utilizzando Tapatalk
Appreciate your work Side I'm gonna try it out tomorrow.
wow nice work mate.
yea OC on GPU is a bit strange...i think i know whats going on
Because of this kernel will flash a 7.1.1 rom just to try it so excited.
Tomorrow when I have a while I'll try it out in aosp jdcteam 7.1.1 to see how it works and if it does not break the bluetoh, thanks
luiwii said:
Tomorrow when I have a while I'll try it out in aosp jdcteam 7.1.1 to see how it works and if it does not break the bluetoh, thanks
Click to expand...
Click to collapse
its a kernel for CM mate Not aosp
side said:
its a kernel for CM mate Not aosp
Click to expand...
Click to collapse
ok , thanks , don't works in aosp
OMG great work @side, I congratulate you for your kernel: D, I'm really excited to try it , thank you very much for giving us this gift for all of us who still have the already forgotten s4, waxing ... thank you very much
Sorry for the bad english, i use google traductor :'v
I have bootloop when I do wipe cache and dalvik, any reason ?, I am in the AICP ROM 12/30/16
killer!os133 said:
I have bootloop when I do wipe cache and dalvik, any reason ?, I am in the AICP ROM 12/30/16
Click to expand...
Click to collapse
Is aicp actually a cm based rom?
Next update will also have aosp version
side said:
Is aicp actually a cm based rom?
Next update will also have aosp version
Click to expand...
Click to collapse
Yup, is based in CM
Hey @side, great work on the kernel, so far everything is running smoothly, I just had to change GPU clock to 360, 600 gave me RRs and artifacts. You have a typo in the thread, the kernel is 3.4.112 not 3.4.110.
david19au said:
Hey @side, great work on the kernel, so far everything is running smoothly, I just had to change GPU clock to 360, 600 gave me RRs and artifacts. You have a typo in the thread, the kernel is 3.4.112 not 3.4.110.
Click to expand...
Click to collapse
whoops...thanks for that mate