FEATURES FOR 4.2.2:
Code:
-Built from CM10.1 sources
-Built using Linaro 4.7.4 toolchain
-Overclocked to 1620Mhz
-Underclocked to 270Mhz
-faux sound is here
-Undervolted and support for user undervolting
-Added Governors
+intellidemand
+badass
+wheatley
+smartassH3
+asswax
+smartmax
-Added IO Schedulers
+sio
+tripndroid
+fifo
-thalmus hot plugging (mpdecision is disabled by default for 4.2.2)
-fast charge support
-frandom support
FEATURES FOR 4.3:
Code:
-Built with latest CM10.2 sources
-latest linux 3.4.65
-Compiled with Linaro 4.8.2
-Overclocked to 1620Mhz
-Underclocked to 270Mhz
-fast charge support
-faux sound support
-CM cherrypick to prevent battery drain (thanks for finding it pwncake)
-Added Governors
+intellidemand
+badass
+wheatley
+smartassH3
+asswax
-Added IO Schedulers
+sio
+tripndroid
+fifo
-thalmus hot plugging
-frandom support
-undervolting and user undervolting (minimum is 900, anything below this won't change anything)
-modified colors (sort of like trinity but my modifications)
-gpu OC to 480
This rom currently supports the Trickster Mod App - get it here https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=en
This rom is meant for AOSP 4.2.2 and 4.3 depending on which download you grab and what ROM you use. Do not mix the kernel, you assume the risks of your stupidity if you don't read the OP.
PM me if you need any help starting up your own kernel
BDownloads for 4.3:
BionicSheep2v0.7.1_RC2
BionicSheep2v0.6.0_RC1
BionicSheep2v0.5.5
BionicSheep2v0.5.1
Downloads for 4.2.2:
BionicSheepv0.3.8_RELEASE_6
READ THIS PLEASE:
Everyone, sorry to disappoint but this kernel is now dead. Due to a serious serious issue with the git client, me trying to delete 1 repo caused the deletion of my kernels repo instead. There will be no builds anymore, I would have to start from scratch and I do not remember every line of code I have changed for the past 4 months.
My sincerest apologies to you guys, I am still shocked myself right now, I can't believe it did that.
I will keep downloads up for now but I doubt the kernel will work bug free into the future without keeping up with driver updates and such. If there are any GPL concerns from any mods here on xda, please let me know and I will take the links down. I had source up until it got deleted. Thanks for the help, experience, and the times guys. You made this kernel a wonderful learning experience for me. Look out for my app in the next few months guys, its my new project if git doesn't screw me on that too.
My settings:
Gov: asswax
IO: row
Read ahead: 1024
Voltages: (stock, I pick them in the first place )
GPU: 480
Powersaving: 0
Mpdecision: its gone so enabling it does nothing
Sources:
https://github.com/BionicSheep/android_kernel_samsung_d2.git
Special thanks to:
ahagersr - for getting me started up and giving me hours of reading material
stratatak7 - for helping with packaging and voltage fixes
gideonX - for his patience and willingness to answer my nooby questions
pwncake193 - for helping me with 4.3 sources and kernel start up for it (send him thanks guys)
ktoonsez - for his patience and willingness to answer my nooby questions
imoseyon - fastcharge
TripNRaVeR - for his IO scheduler
faux123 - for his awesome sound support
the community - help in general
Changelog
Code:
10.07.2013 RC2
-fix all the bugs!
10.06.2013 Experimental Release
-Hopefully fixed random reboots (you tell me)
-Linux 3.4.65 updates
-cm updates
-clock changes
-GPU overclocking to 480, if you think its useless, don't tell me, just turn it off, my testing proves otherwise
-updates deadline scheduler to have 0ms latency (credits to imoseyon)
10.03.2013 Release Candidate
-cm updates
-asswax tunables adjusted to personal preference. Ramps up slower but also ramps down slower, also focuses on lower
clocks at screen up and deep sleep. Check the git if you're curious
-Linaro 4.8.2 instead of 4.7 used to compile
-Latest linux 3.4.64
-378 clock changed back to 384 (so much more stable and battery friendly)
-voltage adjustments
[COLOR="Red"]This is probably my last build for this phone, when the Nexus 5 comes out I will probably get it and sell my gs3, so if the
price is less than $350, this will be it guys. Thanks for testing as I made my first kernel. I learned a lot! If any huge issues
present themselves I will obviously update it.
4.2.2 is being worked on, but my tester has to get back to me on the latest build (I run 4.3 personally) and then I will upload!
[/COLOR]
09.25.2013
-cm updates
-bluetooth updates
-basically update the everything
-linux updated to 3.4.61 (x.62 will be implemented soon hopefully
-modified clocks a bit to try and get better stability
-sorry updates have been slow (school and all), I am planning on getting a nexus 5 on release so prepare for a potential stop on this kernel for the gs3 when that happens (sorry)
08.23.2013
-tweaked sheep colors a bit and colors look whiter than ever!!
-voltage tweaks (again)
-smartmax governor added(info on it [URL="http://forum.xda-developers.com/showpost.php?p=38193047&postcount=6943"]here[/URL])
08.22.2013
-trying to fix various bugs
-linux 3.4.59 update
08.20.2013b(4.3)
-torch is done! Finally figured out what was going wrong
08.20.2013(4.3)
-linux 3.4.58 updates
-latest cm sources
-fixed torch
-bionicsheep colors should be implemented on boot (no yellow tint)
-voltage tweaks
08.15.2013(4.3)
-rebased from cm so latest drivers and merges
-linux 3.4.57 updates
-upped voltages on overclock so this should fix reboots for some people
-code clean ups
-modified screen colors, its like trinity but my tweaks.
I tried to make colors less saturated and cool the colors
(to enable for now just switch the screen temp (to any option)
in the advanced settings and lock your device,
I will enable on boot if you guys like it)
-so with new drivers this build tends to produce graphical
glitches on older versions of ROMS (pwncakes latest build has been
tested and works)
-old versions of the kernel also no longer play nice with new versions of ROMS
08.12.2013(4.3)
-fixed reboots for some people (I wasn't able to get it to reboot so
hopefully this works for you guys, let me know if it doesn't)
-undervolting finally is here and stable!
-user undervolting is back (min is 850 so going lower is pointless)
-it seems smoother than normal
08.11.2013(4.3) Part 2
-forgot to include frandom module in last build its here now
-you should see some performance improvements especially if you
use things like the crossbreeder mod
08.11.2013(4.2.2)
-frandom support
-clock changes
08.11.2013 (4.3)
-faux sound has returned
-Stable underclocking to 270 (whooooo)
-Stable overclocking to 1620 (WHOOOO)
-frandom support
-easter egg
-mpdecision disabled and removed on boot
-latest cm sources merged
08.10.2013 (4.3) Part 2
-think I fixed hot plugging (confirmed)
08.10.2013 (4.3)
-rebased with latest cm sources
-added thalamus auto hot plugging and double checked its working
-added governors:
+asswax
+wheatley
+badass
+smartassh3
+intellidemand
-added IOSched:
+tripndroid
+fifo
+sio
08.09.2013 (4.2.2)
-fixed hot plugging so that it actually shuts down the second core
-mpdecision is removed since hot plugging works now so you don't have to change a thing
08.06.2013 (4.2.2)
-thalamus hotplugging
-fifo scheduler
-easter egg (you will see when you boot)
08.05.2013
-initial 4.3 build
08.03.2013
-Fixed user voltage scaling
-[COLOR="Red"]Faux Sound[/COLOR] support for those who were asking for it
08.02.2013
Added some governors and IO schedulers per request:
-smartassH3 Governor
-asswax Governor
-wheatley Governor
-tripndroid IO Scheduler
08.01.2013
-Initial Release
Give me an hour or two and I'll post some feedback
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
crashpsycho said:
Give me an hour or two and I'll pohavest some feedback
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man. Much appreciated. Like I said, let me know if you have any requests
Downloading this shiz right now. Yay for new kernels. :highfive::good:
So it looks like if you flash over Ktoonz the tweaker box will stay there which is fine.... I must say coming from any reboot I've never seen where a kernel loads up widgets and everything so fast... nice work on that
Responce wicked fast, deep sleeps better than my snoring wifey,
Small querks I've noticed upon flash there is a lag switching pages and responce is slow I've noticed that you can get SOD I'm running at 15xx to 16xx to test high CPU, and that once SOD is in.place Battery Pull require. But works very well
Request, savage zen& zen, Wheatley, smartassh3, Lionheart would be great but very stable kernel so far Big Props!
Edit : running Liquid smooth 2.9
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
crashpsycho said:
So it looks like if you flash over Ktoonz the tweaker box will stay there which is fine.... I must say coming from any reboot I've never seen where a kernel loads up widgets and everything so fast... nice work on that
Responce wicked fast, deep sleeps better than my snoring wifey,
Small querks I've noticed upon flash there is a lag switching pages and responce is slow I've noticed that you can get SOD I'm running at 15xx to 16xx to test high CPU, and that once SOD is in.place Battery Pull require. But works very well
Request, savage zen& zen, Wheatley, smartassh3, Lionheart would be great but very stable kernel so far Big Props!
Edit : running Liquid smooth 2.9
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
When you first flash, you will have lag for a minute or two but then after that it is gone. Idk if I can fix this, but I will look into it. Hmmmmm, haven't gotten any sleep of death yet. What governor are you running? I would recommend asswax since it is just the smartest in my opinion. Also what was your minimum clock? This could cause SOD. Thanks for the help and I will have those governors for you on the next build (shouldn't be long, hell I might be up tomorrow morning)
EDIT: I will try raising the voltages on my underclock and see if that works. For future reference I run this on CM just for smoothness, but I will try testing on LS when I get a chance
aeppacher said:
When you first flash, you will have lag for a minute or two but then after that it is gone. Idk if I can fix this, but I will look into it. Hmmmmm, haven't gotten any sleep of death yet. What governor are you running? I would recommend badass since it is just the smartest in my opinion. Also what was your minimum clock? This could cause SOD. Thanks for the help and I will have those governors for you on the next build (shouldn't be long, hell I might be up tomorrow morning)
EDIT: I will try raising the voltages on my underclock and see if that works. For future reference I run this on CM just for smoothness, but I will try testing on LS when I get a chance
Click to expand...
Click to collapse
His device may not be able to handle UV. I've been booted for almost 30 minutes now with no issues. I've left it stock so far so I will change to badass and see if it happens. So far though smooth as hell.
For reference, I am on Carbon 1.8 Stable.
phoenix2217 said:
His device may not be able to handle UV. I've been booted for almost 30 minutes now with no issues. I've left it stock so far so I will change to badass and see if it happens. So far though smooth as hell.
For reference, I am on Carbon 1.8 Stable.
Click to expand...
Click to collapse
Glad you like, any requests welcome, I want to make this a bit of a rom for the community
aeppacher said:
Glad you like, any requests welcome, I want to make this a bit of a rom for the community
Click to expand...
Click to collapse
As the above poster requested, savagezen is nice. Not sure if it's been ported to 3.4 yet though. Asswax is also nice.
As for IO Sched, there is an awesome one for a T-Mobile kernel to check out. tripndroid iosched by TripNRaVeR. Very smooth with no noticeable drain.
Link to the kernel is here: http://forum.xda-developers.com/showthread.php?t=2301896&page=4
aeppacher said:
When you first flash, you will have lag for a minute or two but then after that it is gone. Idk if I can fix this, but I will look into it. Hmmmmm, haven't gotten any sleep of death yet. What governor are you running? I would recommend badass since it is just the smartest in my opinion. Also what was your minimum clock? This could cause SOD. Thanks for the help and I will have those governors for you on the next build (shouldn't be long, hell I might be up tomorrow morning)
EDIT: I will try raising the voltages on my underclock and see if that works. For future reference I run this on CM just for smoothness, but I will try testing on LS when I get a chance
Click to expand...
Click to collapse
actually my setting were at 1512-1620 intellidemand/sio for testing, UV ive never had any problem and i didnt change the voltage setting , does this kernel support FastCharge ran Fastcharge toggle on trickster and it didnt stick for some reason, so far ive left everything the same 918-1620 with interactive/row and no issues, but ill keep testin
phoenix2217 said:
As the above poster requested, savagezen is nice. Not sure if it's been ported to 3.4 yet though. Asswax is also nice.
As for IO Sched, there is an awesome one for a T-Mobile kernel to check out. tripndroid iosched by TripNRaVeR. Very smooth with no noticeable drain.
Link to the kernel is here: http://forum.xda-developers.com/showthread.php?t=2301896&page=4
Click to expand...
Click to collapse
I'll get right on that
aeppacher said:
I'll get right on that
Click to expand...
Click to collapse
You da man. :highfive::good:
crashpsycho said:
actually my setting were at 1512-1620 intellidemand/sio for testing, UV ive never had any problem and i didnt change the voltage setting , does this kernel support FastCharge ran Fastcharge toggle on trickster and it didnt stick for some reason, so far ive left everything the same 918-1620 with interactive/row and no issues, but ill keep testin
Click to expand...
Click to collapse
hmmm :/ fast toggle working here with trickster mod. Make sure the phone is unplugged. Then toggle fast charge on. And then you should be able to plug it in. Fast charge won't work if its plugged in.
crashpsycho said:
So it looks like if you flash over Ktoonz the tweaker box will stay there which is fine.... I must say coming from any reboot I've never seen where a kernel loads up widgets and everything so fast... nice work on that
Responce wicked fast, deep sleeps better than my snoring wifey,
Small querks I've noticed upon flash there is a lag switching pages and responce is slow I've noticed that you can get SOD I'm running at 15xx to 16xx to test high CPU, and that once SOD is in.place Battery Pull require. But works very well
Request, savage zen& zen, Wheatley, smartassh3, Lionheart would be great but very stable kernel so far Big Props!
Edit : running Liquid smooth 2.9
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Check out the new update! Added some of your requests (wheatley and smartassh3)
phoenix2217 said:
As the above poster requested, savagezen is nice. Not sure if it's been ported to 3.4 yet though. Asswax is also nice.
As for IO Sched, there is an awesome one for a T-Mobile kernel to check out. tripndroid iosched by TripNRaVeR. Very smooth with no noticeable drain.
Link to the kernel is here: http://forum.xda-developers.com/showthread.php?t=2301896&page=4
Click to expand...
Click to collapse
I added tripndroid and asswax
Holy crap. You're a machine. Flashing this right now. :thumbup:
Sent from my SGH-I747 using xda premium
Looks great! I'll flash this soon. Glad to see you made so much progress.
Sent from my SAMSUNG-SGH-I747
Thanks for sharing your work with us!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Does this have faux sound support?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
x10user2011 said:
Does this have faux sound support?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Not yet man, I'll take that as a request though. If I can figure out how to implement it, I will surely do so
Related
Updated to V0.10
Code:
[B][U]v0.10[/U][/B]
- uppatched to 2.6.35.14
- reverted my unreleased changes of the disabling of samsung debugging, it breaks lo power mode and causes SOD's
- Misc config tweaks
- Misc compiler tweaks
[B][U]v0.08[/U][/B]
- Up patched to 2.6.35.13 source
- merged some changed with Da_G's skyrocket source to fix cpu1 hot-plugging
this shiould solve issues of users having min clock stuck at 384mhz and/or max
stuck.
- fixed vdd_tables, system tuner will be supporting my kernel in up coming releases for this
system tuner, should no longer cause issues. as the hotplug fix solved this
[B][U]v0.06[/U][/B]
- Found tome Carrier IQ **** in tty consoles, removed it
sneaky sneaky...
- patched for call recording <--- DERP apparently it works with out my patch LOL
[B][U]v0.05.6[/U][/B]
- redid source tree from scratch
- Switched on OTG config options again (had them shut off)
- Battery issues resolved
- minor tweaks to autogrouping
- set kernel HZ to 300 for a smoother more responsive feel
- minor tweaks to lag free and smartass
- undervolts have been tested stable by many users and are in this release
[B]- PLEASE UNINSTALL SYSTEM TUNER AND CLEAR DALVIK CACHE THIS RELEASE[/B]
[B][U]v0.05.2[/U][/B]
- loosened up lag free so its not so twitchy at low freqs and ramping up and down constantly
- undervolted all freqs a fair bit
- added smartassv2 back in *Please TEST, i think i have solved the hang at max freq on wake*
- probably forgetting something else i messed with
[B][U]v0.05[/U][/B]
- sourced a multiprossesor service that actually wasnt ****ed and added to kernel
- turned on multi prossesor service and set it to shut off the second core on screen off
or when not needed, and only turn back on when needed
- Patched in BLN *thanks to romanbb*
- Patched services.jar to allow bln to notify you for most notifications from apps now
eg: gtalk, mms, sms app and ect..
- spiffy new boot logo ;)
[B][U]v0.04.1[/U][/B]
- removed smartassv2, its useless in its semi-working state, causing battery drain. I will figure out what its up to.
[B][U]v0.04[/U][/B]
- Lowered stock voltages a bit to get some better battery
- Fixed (i think) smartassv2 ramping up to max clock and then neglecting to ramp back down on wake from sleep
- Recommend using lagfree :)
[B][U]v0.03.2[/U][/B]
- fixed scheduler settings for new min freq, causing me SOD's on screen wake with notification
[B][U]v0.03.1[/U][/B]
- disabled 192MHz in the clock table so users cannot select it and cause a sleep of death situation.
- Default min freq now 384MHz
[B][U]v0.03[/U][/B]
- added in BFQ scheduler if users choose to use it you can use system tuner or other favored apps to change from CFS
- Added SmartassV2 and Iterative schedulers
- Tweaked SmartassV2 for our device
- Added ability to change voltage on the cpus with vdd_tables
[B][U]
v0.02:[/U][/B]
- 1.8ghz lag fixed ;)
- Autogrouping of scheduler added
- lagfree cpu scheduler added, with fully working sysfs interface to edit settings not set by default but recommended! its TITS!
- optimized build flags
- removed sysfs for vdd tables, we have not got it working yet. no worries you shouldn't need it yet ;)
- kernel compression changed for much faster boot times
[U][B]v0.01[/B][/U]
CK3+ Patch Set (Thanks to fellow Team Synergy member Ziggy471 for backporting)
OC 1.8 (Thanks to Romanbb's source tree)
Global UV Tables (Thanks to Romanbb's source tree)
All Debug shut off except samsung debugging (needed)
LZMA compressed
Carrier branded boot splash removed
init.d support
Voltage Control
You can control it via shell/init.d scripts as follows
To over volt ALL frequencies by 10000 uv:
Code:
echo "+10000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_table/vdd_levels
To under volt ALL frequencies by 10000 uv:
Code:
echo "-10000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_table/vdd_levels
To set a specific frequency (ie 1.8 GHz) with a specific voltage (ie 1.25 volts) ]
Code:
echo "1836000 1250000" > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels
Use SetCPU as a gui or sysfs to control CPU freq
DOWNLOAD
CWM FLashable zip:
V0.10
Here
Call Recording app by skvalex
http://dl.dropbox.com/u/44644505/CallRecorder_v.1.0.27_alpha_build05.apk
The app is offered on XDA for free but you can promote his work by Buying it in the MARKET
Trial of full version ( has more features )
http://forum.xda-developers.com/showpost.php?p=19345181&postcount=750
SOURCE
V0.10
http://www.androidfilehost.com/.mrx/
Whoa thats a first, Im first thanks for your work and welcome.
haha thanks
Question: Does this matter that its for the Telus T989D? Will this work for both phone versions? Not a noob, but a noob question sorry. Confused a bit.
Sooo, this is exactly the same as jugs? Just compiled by you?
Sent from my SGH-T989 using Tapatalk
jmercil said:
Question: Does this matter that its for the Telus T989D? Will this work for both phone versions? Not a noob, but a noob question sorry. Confused a bit.
Click to expand...
Click to collapse
should work on tmobile or telus
mikeyinid said:
Sooo, this is exactly the same as jugs? Just compiled by you?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
no, its based off a compleetly different source tree (as the verry first sentense in my post says), i have stripped all debugging possible, its using ck3+ patch sets not bfs 404 and my stock voltages and clock tables differ.
its also a few mb smaller then juggs and has all boot animations stripped from the ramfs
what did you set stock clock to? i'll be the guinea pig and try it out for tmobile user
-Mr. X- said:
should work on tmobile or telus
no, its based off a compleetly different source tree, i have stripped all debugging possible, its using ck3+ patch sets not bfs 404 and my stock voltages and clock tables differ.
its also a few mb smaller then juggs and has all boot animations stripped from the ramfs
Click to expand...
Click to collapse
Thanks for the response. You answered alot more than just my questions I'm sure. I thought for v0.2 roman used the same source. Idk
Is this uv'd as much as jugs v0.1? My phone runs like a champ at 1.8 on that and battery is excellent so that is the voltage I'd like to stick with if possible
Sent from my SGH-T989 using Tapatalk
G1_enthusiast said:
what did you set stock clock to? i'll be the guinea pig and try it out for tmobile user
Click to expand...
Click to collapse
the stock clock is 1.5 like factory.
mikeyinid said:
Thanks for the response. You answered alot more than just my questions I'm sure. I thought for v0.2 roman used the same source. Idk
Is this uv'd as much as jugs v0.1? My phone runs like a champ at 1.8 on that and battery is excellent so that is the voltage I'd like to stick with if possible
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
romanbb uses the drivers only from the T989D source i use the whole tree as it contains less debug code.
-Mr. X- said:
should work on tmobile or telus
no, its based off a compleetly different source tree (as the verry first sentense in my post says), i have stripped all debugging possible, its using ck3+ patch sets not bfs 404 and my stock voltages and clock tables differ.
its also a few mb smaller then juggs and has all boot animations stripped from the ramfs
Click to expand...
Click to collapse
Thanks for the reply!
-Mr. X- said:
the stock clock is 1.5 like factory.
romanbb uses the drivers only from the T989D source i use the whole tree as it contains less debug code.
Click to expand...
Click to collapse
Actually I merged all the changes
Sent from my SGH-T989 using Tapatalk
Romanbb said:
Actually I merged all the changes
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
That's what I thought
Thanks for the new option Mr. X
Sent from my SGH-T989 using Tapatalk
kind of sluggish...
Romanbb said:
Actually I merged all the changes
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Ah didn't know
Thanks for the looksee at your source tree btw
mikeyinid said:
That's what I thought
Thanks for the new option Mr. X
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
No probs, just fiigured it post whhat i personally make and run
G1_enthusiast said:
kind of sluggish...
Click to expand...
Click to collapse
Can't say i'm having this, i've been running these builds all day. aside from adding more changed and testing i didn't need to reflash because of performance issues.
G1_enthusiast said:
kind of sluggish...
Click to expand...
Click to collapse
Are you using ondemand gov? There's something not right about ondemand in this source. Gonna need to be re-worked.
Sent from my SGH-T989 using Tapatalk
mikeyinid said:
Are you using ondemand gov? There's something not right about ondemand in this source. Gonna need to be re-worked.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Ive been using on-demand exclusively @ 1.7GHz and have had zero issues. Although i don't put any faith in quadrant scores i was getting 4500+
I'm going to be working with Ziggy471 on lagfree and smartass v2 govs soon and see if i can get them to cooperate better with dual core setups.
-Mr. X- said:
Ive been using on-demand exclusively @ 1.7GHz and have had zero issues. Although i don't put any faith in quadrant scores i was getting 4500+
I'm going to be working with Ziggy471 on lagfree and smartass v2 govs soon and see if i can get them to cooperate better with dual core setups.
Click to expand...
Click to collapse
I get 3400 Max and some lag using ondemand with jugs. At 1.8. So Idk if its just my phone but ondemand isn't playing nice.
Sent from my SGH-T989 using Tapatalk
mikeyinid said:
I get 3400 Max and some lag using ondemand with jugs. At 1.8. So Idk if its just my phone but ondemand isn't playing nice.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
its the clock rate, 1.8 kicks the **** out of my device too so i stick with 1.7
i tried increasing the vdd but it didn't help much, if at all and i was not satisfied with wasting the voltage for 100mhz. with 1.8 2d accel really suffers too in quad i experienced.
-Mr. X- said:
its the clock rate, 1.8 kicks the **** out of my device too so i stick with 1.7
i tried increasing the vdd but it didn't help much, if at all and i was not satisfied with wasting the voltage for 100mhz. with 1.8 2d accel really suffers too in quad i experienced.
Click to expand...
Click to collapse
OK. That makes sense. Ill clock it down to 1.7 and see if that makes a difference. Thanks for the feedback
Sent from my SGH-T989 using Tapatalk
mikeyinid said:
OK. That makes sense. Ill clock it down to 1.7 and see if that makes a difference. Thanks for the feedback
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
no prob
10 char
SG-NS-ICS Kernel
Here is what's included in the kernel:
Tweaks:
- Boot @ 1.1Ghz Overclock (Bus 220MHZ)
- 1320 Mhz overclock
- Undervolted to maximize battery life
- Kernel updated to 3.0.22 (new)
- Cold colors
- Cpuidle backport from 3.2 Kernel
- Ext4 and IO tweak backports from 3.2 Kernel
- CIFS Module built-in
- init.d support
- USB On the GO! Build5
- Wifi PM_FAST for faster screen off download speed and compatibility
- Increased refresh rate --> ** Only in HIGH_HZ version **
Governors:
- Ondemand
- Conservative - Default
- Performance
- Lazy
- Smartassv2
- Lulzactivev2
IO Schedulers:
- CFQ - Default
- Noop
- Deadline (tweaked for flash devices)
- VR
- Simple IO
Mods:
- Voodoo Sound V10
- BIGMEM for more available memory
- Backlight Notification
- Backlight Dimmer
- Battery Life Extender
- TouchWake
- Custom voltage
Rules and FAQs
Read before downloading
(Note: I don't wanna be rude, I just want to keep this thread clean...)
Q: What settings do you recommend? What governor? What IO Scheduler?
A: I recommend the default settings. This is why it there by default!
Click to expand...
Click to collapse
Q: My phone as rebooted on its own or is stuck on a reboot loop.
A: There are 3 reason why your phone may reboot on its own:
1. Your phone does not handle the Undervolt of the kernel
Flash the stock voltage add-on. (NO I will not make the kernel with stock voltage by default)
2. Your phone cannot handle the Overclock of the kernel
Use another kernel, Sorry...
3. There is a bug in the kernel and I should fix it:
Post the /proc/last_kmsg output as a ZIP in the thread. BUT, before posting make sure the last_kmsg contains the mention "Kernel panic", if not, don't bother posting this because your problem is related to point 1 or 2...A kernel Panic looks like this:
Code:
[ 4079.850240] Kernel panic - not syncing: Fatal exception
[ 4079.850307] Backtrace:
[ 4079.850504] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
[ 4079.850568] r7:00000005 r6:d6b3a600 r5:c0707990 r4:c0741068
[ 4079.850905] [] (dump_stack+0x0/0x1c) from [] (panic+0x7c/0x1a8)
[ 4079.851022] [] (panic+0x0/0x1a8) from [] (die+0x1a4/0x1d8)
Click to expand...
Click to collapse
Q: Why did you remove feature X?
A: Because I think it sucks
* This is my personal opinion and I am allowed to have it
Click to expand...
Click to collapse
Q: Can you add feature X?
A: Depends. Before asking that question, check the changelog.
If it was removed, NO.
* If you have a really good reason why you think a feature should come back from the dead, you can defend your case by PM.
If it's a new feature that I may not know about, just let me know of the feature and I'll consider it.
If its a new shinny CPU governor or IO scheduler, NO the ones that will remain do the job perfectly...
Click to expand...
Click to collapse
Q: What does feature X do?
A: Please try Google or Wikipedia before asking this. The answer is at the tip of your finger tips
Click to expand...
Click to collapse
DownloadsStable Kernels:
SG-NS-ICS_27022012.zip
SG-NS-ICS_27022012_HIGH_HZ.zip
SlimSG_08032012_FS.zip (FileSync Enabled - Safer)
SlimSG_09032012_NoFS.zip (FileSync Disabled - Faster)
Experimental:
* None *
Kernel Add-ons: **Flash in CWM after the kernel.
SG-NS-ICS_StockVoltageMod.zip (new)
SG-init.d-installer
Old kernels:
SlimSG_29022012.zip
SG-NS-ICS_05022012.zip
SG-NS-ICS_05022012_HIGH_HZ.zip
SG-NS-ICS_31012012.zip
SG-NS-ICS_31012012_HIGH_HZ.zip
SG-NS-ICS_14012012.zip
SG-NS-ICS_14012012_HIGH_HZ.zip
SG-NS-ICS_17012012.zip
SG-NS-ICS_17012012_HIGH_HZ.zip
Apps:
Manage this kernel with NSTOOLS. Thx arifhn!
To get USB-OTG working you need USB Host Controller app installed. Thx sztupy!
Thanks to ezekeel, supercurio, morfic, franciscofranco, sztupy, reddv1 and koush which made this kernel possible.
kernel source
Change log:
SlimSG_09032012_NoFS.zip
- Removed FileSync (Faster IO)
- Kernel 3.0.23
- Bring back UV
SlimSG_08032012_FS.zip
- Enabled FileSync (Safer IO)
- Kernel 3.0.23
- Bring back UV
SlimSG_29022012.zip
- Release Slim version of SG kernel. This version is whatever setting I'm running at the moment and everything else removed...
SG-NS-ICS_27022012.zip and SG-NS-ICS_27022012_HIGH_HZ.zip
- Kernel Update to 3.0.22
- Fixed SmartassV2 Sysfs Interface
- Fix in Custom Voltage
SG-NS-ICS_05022012.zip and SG-NS-ICS_05022012_HIGH_HZ.zip
- Kernel Update to 3.0.19
- Use PM_FAST power saving method for WIFI to get Higher throughput and better compatibility.
SG-NS-ICS_31012012.zip and SG-NS-ICS_31012012_HIGH_HZ.zip
- Removed useless Governors
- Removed useless IO Scheduler
- Tuned down conservative and ondemand for better battery life
- Kernel upgrade to 3.0.18
- Updated USB-OTG to Build5
SG-NS-ICS_24012012-NoFSYNC.zip and SG-NS-ICS_24012012_HIGH_HZ-NoFSYNC.zip
- Added V(r) IO Scheduler
- Tweaked deadline IO for flash devices
- Tweaked conservative governor
- IO backport from 3.2
- ext4 backport from 3.2
- ext4 tweaks
- optimized sha1, memcopy, string libs
- TCP tweaks
- Added USB-OTG
- and more ...
SG-NS-ICS_17012012.zip and SG-NS-ICS_17012012_HIGH_HZ.zip
- New CPU Governors: Lagfree, MinMax, Smartassv2, InteractiveX and Lulzactivev2
New Add-on 17012012
- Change boot script to use stock voltage instead of Undervolt. *Requires busybox to be installed
SG-NS-ICS_14012012.zip and SG-NS-ICS_14012012_HIGH_HZ.zip
- Removed GPU OC since it doesn't do anything
- Made init.d support built-in
* Note: You need to have busybox installed for init.d to work. Look for the busbox installer app in the market.
New Add-on 13012012
- Adds init.d support to the kernel
SG-NS-ICS_12012012.zip and SG-NS-ICS_12012012_alternate.zip
- Kernel 3.0.17
- Experimenting with GPU Overclock (now at 250Mhz instead of 200Mhz)
SG-NS-ICS_11012012_alternate.zip
- Include increased refresh rate
- Should have more washed out colors
SG-NS-ICS_11012012.zip
- Back to cold colors
- Remove increase refresh rate, cause colors to look washed out
- Still has the 1320 Mhz
SG-NS-ICS_10012012.zip
- Added Test Voodoo color with green flicker fix
- Added 1320Mhz overclock
SG-NS-ICS_09012012.zip
- Updated kernel to 3.0.16
- Added Cpuidle backport from 3.2 kernel
SG-NS-ICS_06012012.zip
- Remove readahead because it was causing slow down in the UI
- Adjusted OnDemand governor to make it snappier
- Fix to cpufreq to make it more statble
- Added Simple IO scheduler
- Made colors 8500K instead of 6500K
** Note: This kernel is a lot faster than previous ones
SG-NS-ICS_04012012.zip
- BLN
- BLD
- BLX
- TouchWake
- Custom Voltage
- CIFS
- Adjusted Ondemand governor default values
SG-NS-ICS_03012012.zip
** Initial Release **
- 1.1Ghz Overclock
- UV
- Lazy governor
- BFQ v3r1 IO Scheduler
- Voodoo Sound V10
- BIGMEM
- Kernel 3.0.15
- 65 FPS
- 1024K Memory Readahead
Awesome Kernel !!!
But I would love to see the 100% charge mod.
jalexishg said:
Awesome Kernel !!!
But I would love to see the 100% charge mod.
Click to expand...
Click to collapse
It's there .... 100% Battery Mod - commit log
Solid kernel!
Gonna try this out right now.
Edit: Voltages must be too low for my phone. Getting reboots.
Oh man. I just got settled with this stock kernel. Now this new kernel comes. lol I hate having the crack flash urge.
astaccz said:
Oh man. I just got settled with this stock kernel. Now this new kernel comes. lol I hate having the crack flash urge.
Click to expand...
Click to collapse
It's better than stock
Better battery life and faster!
downloading now, no sense trying to resist feeding my crack flashing addiction...
sent from my ns4g running aosp oicsv43 via xda app
steve.garon said:
It's there .... 100% Battery Mod - commit log
Click to expand...
Click to collapse
Not working with NSTools, only showing 96% try to move it to 100% and stay stuck on 96%, any idea ?
I cant resist it either. Flashed it gonna let it settle in and check the performance once I fully charge it again.
Any thoughts on the comparison of CFQ and BFQ?
Nice!!!!
Sent from my Nexus S 4G using xda premium
Could not adjust colors via voodoo
°•neXus S4G•°
jalexishg said:
Awesome Kernel !!!
But I would love to see the 100% charge mod.
Click to expand...
Click to collapse
wow....But anyways thanks for bringing your goodness to us NS4G users Steve. I look forward to using this as my daily driver kernel now
jalexishg said:
Not working with NSTools, only showing 96% try to move it to 100% and stay stuck on 96%, any idea ?
Click to expand...
Click to collapse
100% battery mod is a cosmetic fix. BLX will never go over 96%. If you do go over 96%, you'll damage your battery...
FL0OD said:
Could not adjust colors via voodoo
°•neXus S4G•°
Click to expand...
Click to collapse
I'm using a cold color mod instead of voodoo colors. Voodoo color was never actually an 100% completed project. Because of the green flicker issue, voodoo color was not included in the kernel. Pawitp from team hacksung seems to be working on an alternative to voodoo color for the GalaxyS. I might try that in future release...
I'm aiming for a really stable kernel. Only features that I know work and that work well will go in.
Breaks USB tether
This kernel breaks USB tether. I am using CM 9 alpha 19 with Glados 2.7. Switched back to Glados and USB tether works again.
Downloaded and flashed. Seems to be running good. Showing benchmark scores only slightly behind other kernels running 1300/1400mhz.
Thanks for posting this up. I like it!
DaytonaDU said:
This kernel breaks USB tether. I am using CM 9 alpha 19 with Glados 2.7. Switched back to Glados and USB tether works again.
Click to expand...
Click to collapse
Good to know... I've never tried USB tether. I'll check that out for next release.
steve.garon said:
Good to know... I've never tried USB tether. I'll check that out for next release.
Click to expand...
Click to collapse
USB tether works for me kinda of slow but it works
Sent from my Nexus S 4G using xda premium
simonb255 said:
USB tether works for me kinda of slow but it works
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Wifi hotspot is far better than USB tether IMHO... I'll test both later.
Hi guys, i've been working on a better kernel for our W, but i didnt create a thread for it. Im doing this now:
*** For ICS roms ***
Here is the changelog (all my kernels are compiled with linaro toolchain):
--------------------v1-------------------- STABLE
-added smartassV2 governor
-added interactivex governor
-added lazy governor
-added lulzactive governor
-added lionheart governor
-added ondemandx governor
-added intellidemand governor
-added smartass governor
-added lagfree governor
-added the Stochastic Fair Blue (SFB) network scheduler
-added SIO scheduler
-enabled CFQ scheduler
-enabled BFQ scheduler
-added SLQB memory allocator
-zram support active
-added jrcu
--------------------v2--------------------
-enabled kernel debugger
-added bfs scheduler
-reverted to tiny_RCU
-removed useless governors
--------------------v2.2--------------------
-rewrote overclock support
--------------------v2.3--------------------
-undervolted cpu
-undervolted components (maybe some major battery life improvements)
-minor fixes
--------------------v3.0-------------------- IN TEST
-completely new kernel based on arco and castagnaIT sources.
-undervolted (if someone get crashes, tell me)
-overclocked (up to 2ghz)
-probably better battery life and performance with BFS
-added some new battery friendly governors
-BFS brought some major performance improvements and smoothness (5000+ on antutu)
****** I'm uploading an pre-undervolted version and a stock volted one. ******
****** New v3.0 stock version up to 2GHZ ******
****** Reference voltages attached ******
If you want to tweak BFS scheduler try setting values (1-300) on /proc/sys/kernel/rr_interval
PLEASE GIVE FEEDBACK.
Obs: tell me if bluetooth, gps, fm, wifi and any other component are working fine.
BFS version only this time.
OBS:Im still trying to find a way to make BLN mod work for our phone.
Please give me feedback and suggestions. Thanks
i'm currently use your v1 kernel, can i flash the new one directly?
or i need to do some wipe first?
terifish said:
i'm currently use your v1 kernel, can i flash the new one directly?
or i need to do some wipe first?
Click to expand...
Click to collapse
Yea i'm a bit worried about this as well.
I'm using V1 now and it's so great that I'm afraid to upgrade to V2.
Does it improve battery life? For me is the most important thing about a kernel. =)
....
Ok, I installed V2. I'm using smartass as CPU Governor. On V1, everything was ok.
I realized that boot on V2 takes too much time (stuck on black "Samsung Galaxy W" screen) although it boots.
My phone just did a random reboot. It never happened before. I just opened Phone, Messaging, WhatsApp and it rebooted. =| And now it turns on and reboot itself again without opening a single app.
I'm going back to V1. =)
Great job, by the way!
forfivo said:
Hi guys, i've been working on a better kernel for our W, but i didnt create a thread for it. Im doing this now:
Here is the changelog (all my kernels are compiled with linaro toolchain):
--------------------v1--------------------
-added smartassV2 governor
-added interactivex governor
-added lazy governor
-added lulzactive governor
-added lionheart governor
-added ondemandx governor
-added intellidemand governor
-added smartass governor
-added lagfree governor
-added the Stochastic Fair Blue (SFB) network scheduler
-added SIO scheduler
-enabled CFQ scheduler
-enabled BFQ scheduler
-added SLQB memory allocator
-zram support active
-added jrcu
--------------------v2--------------------
added minfree tweak (lowmemorykiller)
sdcard readahead tweaked
added vr io scheduler
removed kernel debugger (performance improvement?)
added savagedzen governor
added smoothass governor
added brazillianwax governor
added scary governor
add and enable cleancache and frontswap
included tweaks in kernel
add real video
added 2 way call recording
added bfs scheduler
reverted to tiny_RCU
many other codefixes (check on github)
Click to expand...
Click to collapse
When i lock the screen, it reboots
Is this for Gingerbread or ICS?
Sent from my GT-I8150 using xda app-developers app
Ok, I installed V2. I'm using smartass as CPU Governor. On V1, everything was ok.
I realized that boot on V2 takes too much time (stuck on black "Samsung Galaxy W" screen) although it boots.
My phone just did a random reboot. It never happened before. I just opened Phone, Messaging, WhatsApp and it rebooted. =| And now it turns on and reboot itself again without opening a single app.
I'm going back to V1. =)
Great job, by the way!
jinghuanpang said:
When i lock the screen, it reboots
Click to expand...
Click to collapse
yes, yes, yes, i've checked this out, it's true! flashing over v1 w\o wiping anything
exactly the same problem like in my efforts!
please tell me how, when it's fixed..
reverting to v1 and goin to my classes..
Thanks for ur great work on improving our ICS kernel !!
here the question, the new kernel has reboot bugs, :crying:
now still no way fix it rite ..?
Woohooo... said:
Thanks for ur great work on improving our ICS kernel !!
here the question, the new kernel has reboot bugs, :crying:
now still no way fix it rite ..?
Click to expand...
Click to collapse
Brother, give him some time. In fact he just uploaded today and it is normal there are bugs.
Flashing V2, but reverting back to V1. About long time to boot I think it because too many governors, and i/o, you should remove few standard governors like powersave, ondemand, interactive (since there is interactiveX and ondemandX) then smartass, because smartassv2 is included, noop, and other standard i/o. Just my silly thought btw sleep of death occured to me, so strange in v1 this is not occured, I think this is because kernel debugger thing and celancache/frontswap so I flash back to v1
Sent from my GT-I8150 using Tapatalk 2
hey buddy may i know what is the best governor out there? i'm looking for no lag at all because i use golauncher XD.
kemaro30 said:
hey buddy may i know what is the best governor out there? i'm looking for no lag at all because i use golauncher XD.
Click to expand...
Click to collapse
I current use smartassv2 with the sio i/o and its been great in both performance and battery, it also feels smoother as well.
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Brian_SGW_CM9 said:
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Are you flashing from v1 or from just the arco kernel?
Also might I suggest trying to flash v1 since its been reported to be more stable than v2 is.
kernel v2 isn't stable for now, I suggest you using v1
Brian_SGW_CM9 said:
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Brian, just flash the zip file. I suggest to have a back up using CWM prior flash using CWM. Once flashed just reboot.
Sent from my GT-I8150 using xda app-developers app
terifish said:
i'm currently use your v1 kernel, can i flash the new one directly?
or i need to do some wipe first?
Click to expand...
Click to collapse
Yes, but to be sure go to cwm and do a CACHE wipe.
joaocadide said:
I'm using V1 now and it's so great that I'm afraid to upgrade to V2.
Does it improve battery life? For me is the most important thing about a kernel. =)
....
Ok, I installed V2. I'm using smartass as CPU Governor. On V1, everything was ok.
I realized that boot on V2 takes too much time (stuck on black "Samsung Galaxy W" screen) although it boots.
My phone just did a random reboot. It never happened before. I just opened Phone, Messaging, WhatsApp and it rebooted. =| And now it turns on and reboot itself again without opening a single app.
I'm going back to V1. =)
Great job, by the way!
Click to expand...
Click to collapse
I'll install whats app and simulate your scenario. Tell me more info about your rom, governor, io scheduler, cpu frequency; wifi, bluetooth, gps status; I'll test it here and post my observations later. Thanks buddy
PolyDroid said:
Is this for Gingerbread or ICS?
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
I really dont know if it'll work on gingerbread. Wait for more feedback here. I can check this, but im focused on the kernel development now. Thks
jinghuanpang said:
When i lock the screen, it reboots
Click to expand...
Click to collapse
This doesnt happen with me. Can u post more details about your rom, governor,io scheduler, cpu frequency? Was your wifi, bluetooth,gps or any other thing turned on? Were you using any application when it happended? Because i've disabled FSync, and its known to be causing issues. I have to check whats the problem. Thanks
dimaka1256 said:
yes, yes, yes, i've checked this out, it's true! flashing over v1 w\o wiping anything
exactly the same problem like in my efforts!
please tell me how, when it's fixed..
reverting to v1 and goin to my classes..
Click to expand...
Click to collapse
Dimaka , can u post more details about your rom later. I need to know which governor,io scheduler, cpu frequency you were using. And if your wifi, bluetooth,gps or any other thing was turned on. Were you using any application when it happended? Thanks
Woohooo... said:
Thanks for ur great work on improving our ICS kernel !!
here the question, the new kernel has reboot bugs, :crying:
now still no way fix it rite ..?
Click to expand...
Click to collapse
Just flash v1 temporarily unitl i find out whats happening. Dont need to worry.
hotheabilly said:
Flashing V2, but reverting back to V1. About long time to boot I think it because too many governors, and i/o, you should remove few standard governors like powersave, ondemand, interactive (since there is interactiveX and ondemandX) then smartass, because smartassv2 is included, noop, and other standard i/o. Just my silly thought btw sleep of death occured to me, so strange in v1 this is not occured, I think this is because kernel debugger thing and celancache/frontswap so I flash back to v1
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
, its not my intention to keep all these governor and io schedulers. Just added them test battery and performance. I just need more feedback so i remove the bad ones. I intend to do exactly what you say...Ill look into the problems today. And hotheabilly, please post more details about your rom, governor,io scheduler, cpu frequency. And if you were using wifi, bluetooth,gps or any other thing. Were you using any application when it happened? Thanks
kemaro30 said:
hey buddy may i know what is the best governor out there? i'm looking for no lag at all because i use golauncher XD.
Click to expand...
Click to collapse
Some are saying that smartassV2 and lazy with SIO are the best relation battery/performance.
LittleDoggy said:
I current use smartassv2 with the sio i/o and its been great in both performance and battery, it also feels smoother as well.
Click to expand...
Click to collapse
I agree with you. Thanks for the feedback. I intend to make a lightweight kernel, but first i want to implement all requested features and later we start to burn the extra fat...ahahah
Brian_SGW_CM9 said:
Okay then do I need to wipe cache of something for installing v2? I am from Arco's kernel.
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
I recommend it, but i'm not sure if its really necessary. I would do it to be certain. Thks
forfivo said:
I agree with you. Thanks for the feedback. I intend to make a lightweight kernel, but first i want to implement all requested features and later we start to burn the extra fat...ahahah
Click to expand...
Click to collapse
No problem, I really don't mind with its current size as of this moment and it doesn't really feel clunky unless you start having all CPU governors in there then yea...:good:
How do i install this Kernel? Just flash it with CWM?
Welcome to Elite Kernels. One is for Sense based 4.4.3 roms, one for GPE 4.4.4 roms, & one for AOSP 4.4.4 roms. There are two variations of sense, one with OC/UC and one with stock clock slots.
I originally started this kernel , Brymaster5000 now maintains this thread.
Additional Features are as follows:
- CPU OC and UC 162-2106
- ROW, SIO, ZEN, FIOPS, and VR schedulers
- OnDemand, Performance, Power Save, Intelliactive, Intellidemand, Intellimm, Optimax, Smartmax, and Lionheart Governors
- Max Screen Off CPU Frequency
- Advanced TCP Congestion controls
- Fast Charge
- GPU OC/UC with steps of 128, 200, 320, 400, 450, and 487
- Faux Sound Control
- User Space Voltage control
- Thermal Control by crpalmer
- Intelliplug HotPlug alternative
- Screen Wake options: Sweep2Wake, DoubleTap2Wake, Logo2wake, pocket detection,flick2wake, pick2wake and Logo2Menu
- Cpu stats enabled
- FS encryption disabled to allow system r/w
- Many performance patches to memory management and fs control
- ZRAM/ZCACHE/Swap
- LZ4 Compression
- Kexec Hardboot
- Linaro 4.9.2 arm cortex a15 with 02 optimization
- Simple GPU governor
Elite Lunar Kernel for Sense 4.4.3
Sense 443 - OLD Gestures (no xposed):
OC/UC - Elite_Kernel-12_31_2014
StockClock - Elite_Kernel-12_31_2014-stockclk
Sense 443 - NEW Gestures (xposed):
OC/UC - Elite_Kernel-12_31_2014-gest
StockClock - Elite_Kernel-12_31_2014-gest-stockclk
Elite Lunar Kernel for GPE 4.4.4
OC/UC - Elite_Lunar_GPE_Kernel-08_26_2014
StockClock - Elite_Lunar_GPE_Kernel-08_26_2014-stock_clk
Elite Kernel for AOSP - CM based ROMs
Elite-AOSP_kernel-11_17_2014
Elite Kernel - stock with wake features only
Elite_m7_Kernel-11_08_2014
Please notify me if you are going to use this kernel in your ROM
Sense 4.4.3 Source
GPE 4.4.4 Source
CM 4.4.4 Source
XDA:DevDB Information
Elite Lunar Kernels, Kernel for the Verizon HTC One
Contributors
buckmarble, brymaster5000
Source Code: https://github.com/Buckmarble/Elite_Lunar_kernel
Kernel Special Features: S2W, L2M,DT2W,OC,UC, Fast Charge, Custom Voltage, Performance Tweaks
Version Information
Status: Stable
Created 2014-01-02
Last Updated 2014-12-31
Reserved
Change Log
01/02/2014
- added faux gamma control
- SLIMbus freq tweaks to give max audio potential. Compliments zeroinfinity audio mod very well
01/04/2014
- reverted faux gamma control
01/08/2014 to 01/11/2014
- added fstrim support to updater
- enabled SElinux security at the kernel level NOTE: selinux stays will still report disabled if the ROMs ramdisk is insecure.
01/26/2014
-Disabled Perf-Lock
Reserved
Thanks for posting a thread on your kernels. FYI, your download links need tweaked.
Yes, a big thanks to @hawknest for coming to me to get kit Kat sense booting. You guys wouldn't have it right now if he did not start this excursion. It was fun and challenging to get it to work without proper source.
And even more thanks to @buckmarble for his know how. I wouldn't have been able to do this on my own.
Sent from my ecliptic one.
download links are fixed
I have used both of these kernels in the past couple weeks and have had great luck along with literally all day battery life and a benchmark of 28951!
Thanks for all your hard work and for providing it to the verizon HTC One community
eyetek said:
I have used both of these kernels in the past couple weeks and have had great luck along with literally all day battery life and a benchmark of 28951!
Thanks for all your hard work and for providing it to the verizon HTC One community
Click to expand...
Click to collapse
I am happy to hear you are enjoying it! On a side note we have been seeing benchmarks upward of 31500 on the over clock version.
Awesome finally a custom kernel for GPE Running great so far for me, Im on Joel's GPE ROM. Noticed a small issue on the OC version, max CPU clock doesnt seem to stick, tried via trickster and shell, it keeps reverting to the max 2.1ghz, I was trying to set it a bit lower to 1.9ghz.
SellswordShev said:
Awesome finally a custom kernel for GPE Running great so far for me, Im on Joel's GPE ROM. Noticed a small issue on the OC version, max CPU clock doesnt seem to stick, tried via trickster and shell, it keeps reverting to the max 2.1ghz, I was trying to set it a bit lower to 1.9ghz.
Click to expand...
Click to collapse
use the lock frequency feature in trickster right above the frequency selections to make them stick.
Sorry to be that guy but anyone have some recommended settings? I'm on the gpe overclocked version.
I flashed this last night on the Viper rom. Turned on smartmax governor and can already see a big improvement in battery life. Thanks to all involved.
Sent from my HTC6500LVW using Tapatalk
To the kernel Dev(s) this is running great on hawks sprint ROM thanks!! I also have a question about the kernel. Is it possible to add this feature because I use zeroinfinity sound mod and this is suppose to compliment it...
poondog said:
Overclocked slimbus to max. This is as high as it goes, its 100% stable in testing with no negative impacts. Brings improvements all around for audio playback etc (thx to @ZeroInfinity and me )
.Some generic function optimizations (for faster kernel, better battery.. overall improvements to the code, from CAF)
.Add USB Fast Charge (Flar, Motley, Chad Froebel for original mod)
What is this slimbus OC about?
It will really start to take advantage of the hardware of this phone, as well as the audio improvements in the ERA sound mod. Hopefully it will open the door to more stuff that was previous restricted
Thanks! Have fun
Click to expand...
Click to collapse
Cj719 said:
To the kernel Dev(s) this is running great on hawks sprint ROM thanks!! I also have a question about the kernel. Is it possible to add this feature because I use zeroinfinity sound mod and this is suppose to compliment it...
poondog said:
Overclocked slimbus to max. This is as high as it goes, its 100% stable in testing with no negative impacts. Brings improvements all around for audio playback etc (thx to @ZeroInfinity and me )
.Some generic function optimizations (for faster kernel, better battery.. overall improvements to the code, from CAF)
.Add USB Fast Charge (Flar, Motley, Chad Froebel for original mod)
What is this slimbus OC about?
It will really start to take advantage of the hardware of this phone, as well as the audio improvements in the ERA sound mod. Hopefully it will open the door to more stuff that was previous restricted
Thanks! Have fun
Click to expand...
Click to collapse
can you link me to the mod?
Click to expand...
Click to collapse
Any chance of you including faux's gamma control?
Sent from my HTC6500LVW using Tapatalk
fatmando2 said:
Sorry to be that guy but anyone have some recommended settings? I'm on the gpe overclocked version.
Click to expand...
Click to collapse
I prefer battery savings and responsiveness, so using smartmax governor with row scheduler, -25000 under volt (this can probably go lower). OC min freq set to 216000. Heres some knowledgeable guesses I am testing out for the governor:
awake_ideal_freq = 486000
boost_freq = 1728000
ramp_up_step = 400000
suspend_ideal_freq = 378000
touch_poke_freq = 1728000
trying to lower the idle sleep frequencies, but boost up faster and higher when you are using the phone (touching button / screen)
see governor source comments if you want to learn more about the parameters https://github.com/Buckmarble/elite.../drivers/cpufreq/cpufreq_smartmax.c?source=cc
edit: been stable across a variety of use for me so far, hopefully will also see battery savings later, if you notice any trouble let me know
Bout Damn time lol
Sent From My Dark EclipticONE
I've been running 12/30 for a few days oc , no issues fast and battery efficient . Could you add a few features such as faux sound and color control?
axeldiks1 said:
I've been running 12/30 for a few days oc , no issues fast and battery efficient . Could you add a few features such as faux sound and color control?
Click to expand...
Click to collapse
faux sound already in it. Read OP. I will look into the color control and i am looking into a few other mods as well
http://forum.xda-developers.com/showthread.php?p=49047610
Sent from my HTCONE using xda app-developers app
===>INTRODUCTION<===
This is my personal kernel based off of ASKP. I cherry-picked a lot of custom commits from many big kernels. I'm new in development, so, any help whatsoever (commits, suggestions, logs, etc etc) would be greatly appreciated
releases will be as frequent as possible, as I'm gone for 7 hours of my day during weekdays.
****FEATURES****
using A.S.K.P as the base<- you get all the features of A.S.K.P+ more
linux kernel 3.101 WITH the Con kalivas patchset for improved performance
L3 cache overclock (116MHZ)
custom RAM OC setup (333MHZ/400MHZ/466MHZ)
gpu oc interface (307/384/512)
optimized CRC32 computing algorithem
optimized square root interger library
custom voltage setup,modified by me personally taking inspiration from the voltage's of other kernels,everything from the GPU voltage to the screen regulator has been tweaked
CPU overclock up to 1.7GHZ
multiple governors i have personally added (this is ALWAYS changing considering what jhonny/grarak/faux/bsmitty/Amperific/boype do to their governor,or what i personally decide to do)
some new IO schedulers have been added
EXFAT is added, 1.2.5 source from dorimanx
updated RWSEM to linux 3.14
numerous enhancements to SLUB including a update to the 3.3 version
MMC software updates/enhancements
GPU side enhancements
HUGEMEM setup (this is a arguement from me personally,the gnex is only a 720P phone,you cannot utilize 1080P with out screen,so even if this is a retarded and dirty hack,i want to use the extra available ram)
ALL kernel logging has been disabled for a increase in speed
Kernel SamePage merging has been updated to linux 3.6 standards with faux's check page patch for improved performance and efficiency
memory Compaction updates for better performance
modified screen colors
imsoyen's SmartReflex 1.5 tuning interface
updated thermal framework drivers from faux & omapzoom
updated android binder.c from omapzoom's 3.8 branch that bsmitty discovered
updated logger from poondog,linux 3.9
graphite and link time optimizations including -o3 and hard float point with NEON with the latest linaro 4,9.1 toolchain from christopher83,compiled with graphite ops on gpu code along with -o3
zcache,zsmalloc and zram updated to linux 3.11 from mpokang kernel with faux's setup for zram
many misc enhancements from AK kernel
many misc OMAP enhancements
the latest WIFI drivers WITH a working hotspot
a modified anykernel zip package that will install a new HOSTAPD binary for working wifi hotspot and new meda_profiles.xml to fully disable 108PTHIS KERNEL USES VERY HIGH CLOCK SPEEDS WITH VERY LOW VOLTAGES,I BUILD THIS KERNEL THROUGH A "PERSONAL" SETUP,IF YOU GET SOD'S/ FREEZES,PLEASE UP YOUR VOLTAGES ON "MPU" BY 25 UNTIL THEY STOP :3
IF YOU'RE GOING TO USE A HOTPLUG GOVERNOR, FOR ALL THAT IS HOLY DO NOT USE MULTICORE POWER SAVING WITH IT. THIS CAUSES ISSUES AND NO BUG REPORTS ARE ALLOWED IF YOU HAVE HOTPLUG WITH MCPS
BUILDS:http://patty.mbqdevelopment.com/Kernels/ASKP Remix/ <- the numbers are going to be in order,the bigger the better XD (thanks to mbq for the generous hosting site,or as i like to call him,"big brother" thanks man :good: )
-------------------------------------------------------------------------------------------------------------------------
ALL CREDITS TO THE FOLLOWING
bsmitty83 <- i seriously use all of his commits that i possibly can,go thank him when you get the chance and try his kernel!
franciscofranco<-franco is franco. you all know what he can do.
amperific<i used his kernel for a base,without him,this wouldnt be here :good: give the original a shot when you get the chance!its much cleaner
grarak<lots of his fixes,and thanks to him ive learned alot
Ezekeel<ezekeel. nothing else needed.
tFrost<his great Rom Directory app that can download kernel updates (http://forum.xda-developers.com/gal...ctory-3-14-t2681305/post51078192#post51078192)
burstlam<i use his backports all through the kernel
edoko<alot of his air kernel stuffs helped this kernel alot
faux123<its faux.
ak<he has ALOT of code in this kernel.
imoseyon<interactive x
metalspring<his toolchain is bomb :good:
morfic<color controls
boype<its boype,nothing less to say.
aosp<mr smarty pants
pianistaPL (he wrote most of the original OP for me)
milojoseph (he told me to make the thread)
MBQ_ (his music takes headaches away) ((https://soundcloud.com/mbq-1)) (((he re-wrote the OP for me for spelling fixes and organization)))
poondog (used alot of his stuff for memory)
jhonnyx<-i use every commit of his that works
you! the users! for testing and adding ideas!
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna/
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone[/CENTER]
good to know you're working on a kernel! keep it up!
jhonnyx said:
good to know you're working on a kernel! keep it up!
Click to expand...
Click to collapse
thanks man,means alot! really do appreciate the support!
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
@aosp you're a veteran
Sent from my Galaxy Nexus using xda app-developers app
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
ahmadairfan said:
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
Click to expand...
Click to collapse
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
pianistaPL said:
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
Click to expand...
Click to collapse
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
aosp said:
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
Click to expand...
Click to collapse
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
pattyboi:) said:
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
Click to expand...
Click to collapse
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
pattyboi:) said:
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
Click to expand...
Click to collapse
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
DR3W5K1 said:
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
Click to expand...
Click to collapse
thanks man,the support really does mean the world for me
pianistaPL said:
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
Click to expand...
Click to collapse
thats true man,ill prob talk to some of them tonight & thank you for giving it a shot
if you guys want,theres a latest build without early suspend,testing to see if it has anything to do with screen wake delay,its up on dropbox as i type
pattyboi:) said:
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
Click to expand...
Click to collapse
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
ahmadairfan said:
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
Click to expand...
Click to collapse
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
pattyboi:) said:
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
Click to expand...
Click to collapse
I can make good OP in few minutes Will back
---------- Post added at 03:37 PM ---------- Previous post was at 03:20 PM ----------
Test OP:
INTRODUCTION
This is my personal kernel based of ASKP Kernel. I cherry-picked a lot of custom commits. I'm new in development so every help from developers and users will be great.
FEATURES
ASKP Haste+ as base
graphite and lto optimizations
metalsprings custom toolchain - Linaro 4.7.4
dirtyv commits
rcu updates
intelliplug
pvr governor's
zRAM
high perfomance sound
slight regulator undervolt
oc up to 1.6 ghz
smart reflex class 3 only (the switches in trickster dont work because you cannot adjust sr class 3)
some schedulers i use
some govs i use/like
fastcharge
eco mode
screen specific controls of course
updated thermal drivers
ion updates
700mb ram for user
voltage controls
exfat suppourt
ALL DOWNLOADS
https://www.dropbox.com/sh/z43idai19erzu2n/1NZ69_Jeo3
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALL credits go to:
bsmitty83
franciscofranco
amperific
grarak
Ezekeel
burstlam
faux123
ak
imoseyon
metalspring
morfic
boype
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone?page=1
pattyboi:) said:
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
Click to expand...
Click to collapse
Firsties kill the vmsplit stock is optimal even boype knows
defconfig: 3G/1G vmsplit (tuna default) · ecf4b67 · boype/kernel_tuna_kk44 · GitHub - http://goo.gl/PXCfEo