Related
Anyone seen anything like that?
Sent from my GT-N7000 using XDA App
ekerbuddyeker said:
Anyone seen anything like that?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
the cases with the stands arent available yet.
but the next best thing is the samsung flip cover. it replaces the back cover of the galaxy but adds a leather cover for the screen.
Souai said:
the cases with the stands arent available yet.
but the next best thing is the samsung flip cover. it replaces the back cover of the galaxy but adds a leather cover for the screen.
Click to expand...
Click to collapse
I got one of those it came free with my phone. It does look very good but i gotta say it offers no real protection. It doesnt cover the metal sides and the fact that it cant be 'locked' onto the screen means theres a good chance it will flip open if you drop ur phone and the screen can still be damaged. It makes taking photos extremely inconvenient too.
I now have 2 of those flip covers sitting on my desk gathering dust, the other one came free with my gf's white note.
This is sort of like an ipad cover/stand thingy
ebay item: 250935866665
Not enough posts to put a link in...
really expensive
That wouldn't even work. The magnets and sensors in the iPad are what lets the awesomeness happen. The Note doesn't have either
louisbiker said:
This is sort of like an ipad cover/stand thingy
ebay item: 250935866665
Not enough posts to put a link in...
Click to expand...
Click to collapse
why does it have mickey mouse ears
GALAXYNOTE said:
I got one of those it came free with my phone. It does look very good but i gotta say it offers no real protection. It doesnt cover the metal sides and the fact that it cant be 'locked' onto the screen means theres a good chance it will flip open if you drop ur phone and the screen can still be damaged. It makes taking photos extremely inconvenient too.
Click to expand...
Click to collapse
Well, neither would an iPad2-style smart cover, which is what the OP was asking about!
For me, the flip case is perfect because what I want a case for is simple to protect the screen when I put the phone in my pocket. Impact protection is doesn't figure into my personal requirements because I consider the additional bulk to be an unacceptable trade off for the protection that it would offer in the very rare event that I drop the device. YMMV of course!
The thing I like about the flip cover, other than the fact that it adds almost no bulk to the device, is that I find myself holding the Note one handed much like I would a paper back book, with my thumb on the inside of the cover, 3 fingers behind the device and cover, and my little finger resting on the edge of the bottom of the note.
I also find the cover a great stabiliser when taking photos in landscape as I flip the cover down and use it as part of my "grip". It works to a lesser degree in portrait too, though to start with it does feel a little more cumbersome.
Regards,
Dave
Absolutely, I love how the flip actually makes the Note a lot easier to hold safely. I'm actually happy to have it out while walking around, whereas I've been afraid I'd drop it on the pavement without the flip. I'd pay good money for an app that would switch it on and off when the proximity/light sensors see the case open or close, that would be great...
victorlht88 said:
not true. i am sure its possible for developers to use the light/proximity sensor to lock/unlock the phone or maybe using some app.
http://forum.xda-developers.com/showthread.php?t=1125946
Click to expand...
Click to collapse
This really works but specially the locking option. if i close the flip cover it actually turn off.
wish it would be the same on how unlocking it with just opening the flip cover.
very nice findings
rockysiccion said:
This really works but specially the locking option. if i close the flip cover it actually turn off.
wish it would be the same on how unlocking it with just opening the flip cover.
very nice findings
Click to expand...
Click to collapse
Yes but what if your hand drifts over the prox sensor? sounds annoying...
foxmeister said:
The thing I like about the flip cover, other than the fact that it adds almost no bulk to the device, is that I find myself holding the Note one handed much like I would a paper back book, with my thumb on the inside of the cover, 3 fingers behind the device and cover, and my little finger resting on the edge of the bottom of the note.
Click to expand...
Click to collapse
I do use it the same way
Does anyone who has owned this case for a bit have any opinion on it? How is the quality and such?
Sent from my SCH-I535 using xda app-developers app
No protection for the bottom part of the tablet. Closing the case does not ensure the screen is actually protected as the part the screen is covered with can slide off of it. Dumped it quickly.
Szadzik said:
No protection for the bottom part of the tablet. Closing the case does not ensure the screen is actually protected as the part the screen is covered with can slide off of it. Dumped it quickly.
Click to expand...
Click to collapse
I do agree with some of the comments above however it is my case of choice. I sold a quality noreve leather case and stuck with the original Samsung book cover case as my daily driver with a solution to full protection using another protective case along with it.
See my comments with pictures on the following thread:
http://forum.xda-developers.com/showthread.php?t=1923176&highlight=original+book+cover
HasC said:
I do agree with some of the comments above however it is my case of choice. I sold a quality noreve leather case and stuck with the original Samsung book cover case as my daily driver with a solution to full protection using another protective case along with it.
See my comments with pictures on the following thread:
http://forum.xda-developers.com/showthread.php?t=1923176&highlight=original+book+cover
Click to expand...
Click to collapse
You compromise portability by using two of those together. Check the one that was made by Samsung for Galaxy Tab 10.1 with a flap over the bottom part of the device and see how you could avoid using two cases instead of one.
Thank you for your feedback! Where do you get the fancy pen? I really like the thin form of the case. Can see it really well in your pictures.
Sent from my SCH-I535 using xda app-developers app
Szadzik said:
You compromise portability by using two of those together. Check the one that was made by Samsung for Galaxy Tab 10.1 with a flap over the bottom part of the device and see how you could avoid using two cases instead of one.
Click to expand...
Click to collapse
Yes indeed it was a compromise however the weight of the two together was roughly the same as the leather case I had so for me did not matter. This setup gives me reassuarnce that even after a hard drop, the tablet should be safe whilst transporting as it is whilst on the move, that I am more likely to drop it. Once it it is in the office or at home, it is kept on the desk or on my bed without much risk of dropping and then I have the lightest and practical cover for my specific needs.
I have also purchased another bag that has a secure slot for any 10" tablet with padding around it and is used when I need to carry more than just my tablet with me and similarly when I take the tablet out, it is usually at a desk, this also eliminates the need for me to carry the second housing.
At the time of me buying my case, the one with the securing flap was not available otherwise I probably would have purchased that one instead. Having said that, I still probably would have bought a secondary case for transporting as the Samsung ones are too thin for real protection but are the most practical in my opinion.
The moral here is, if you are considering buying one of these thin cases, it is advisable to consider a second protective case or buy a fully protective leather / pu case that is adequately padded with the downside of it making the tablet feel a lot heavier.
gophy said:
Does anyone who has owned this case for a bit have any opinion on it? How is the quality and such?
Click to expand...
Click to collapse
I currently have the White GALAXY Note 10.1, and I had a faux leather case (generic) from Amazon, and gave it about 2 months of use.
After that I decided to risk my money and bet on the official book cover (in white, as well).
I must say it is extremely durable and gorgeous. It has, somehow, a corporate look, it's extremely thin and the back is well protected.
The cover, on the insides, has a thin and soft veil-like texture, and it sort of acts as a screen cleaner, each time you lift up the front part of the cover. (only applies to naked screen).
All in all, it's durable, I have the white for 2 months now and it's still the same pristine white as it was when it came in the box.
It's resistant and the writing position just works (no Steve Jobs quote intended).
If you have doubts, well, I recommend it!
official Samsung case is good looking, nice design, ****y quality and protection - mine is getting bubless by time on margins - squeezing it does remove them but wtf?! I recommend looking for something else !
I have been using the case for abouta week. I also havea screen protector on the tablet.
pros:
Very light weight
Feels good
Offers several viewing angles, when it works. See cons
Cons:
Magnets are not very strong and don't always hold it in the more up upright position.
Does not positively close, so it can expose your screen in a bag or back pack..
That said, I've been trying other solutions and none seem quite right. I have a gel case thatI bought to bulk up the tab to fit in a cheap cardboard folio usb keyboard case I have left over from another tablet. Although not very elegant, I thinkI will use it for travel as I can use the keyboard on airplanes, it provides extra protection, andI can remove three tablet with the gel case for just walking around. Just need a sturdy OTG and this set up is still less expensive than the official Samsung cover, unless you snag one of the 34.00$ deals from Amazon.
I've also tried the BT keyboard cover. Someone just needs to make one, who had actually useda tablet. Put the same clips in both sides so you don't have one that interferes with the space bar, make the shift and cap keys smaller so the keys can geta bit bigger and fall under you fingers, providea deeper trough so the tab is steadier and the back rest can be redesigned to help with that. I'm sure ZAGG will figure it out.
Finally because of the cons of the Samsung, I am thinking of ordering one of the knock offs that has the flap that closes on the back like the one for the tab10. I think I've seen it where the while thing, flap included, rolls like the iPad cover.
Finally, Samsung needs to work out the magnet thing, offer a smart cover, which should at least be possible with the phone variants.
I guess the simple answer to you question is mixed feelings about the official cover.
Sent from my GT-N8000 using Tapatalk HD
deecee52 said:
I have been using the case for abouta week. I also havea screen protector on the tablet.
pros:
Very light weight
Feels good
Offers several viewing angles, when it works. See cons
Cons:
Magnets are not very strong and don't always hold it in the more up upright position.
Does not positively close, so it can expose your screen in a bag or back pack..
That said, I've been trying other solutions and none seem quite right. I have a gel case thatI bought to bulk up the tab to fit in a cheap cardboard folio usb keyboard case I have left over from another tablet. Although not very elegant, I thinkI will use it for travel as I can use the keyboard on airplanes, it provides extra protection, andI can remove three tablet with the gel case for just walking around. Just need a sturdy OTG and this set up is still less expensive than the official Samsung cover, unless you snag one of the 34.00$ deals from Amazon.
I've also tried the BT keyboard cover. Someone just needs to make one, who had actually useda tablet. Put the same clips in both sides so you don't have one that interferes with the space bar, make the shift and cap keys smaller so the keys can geta bit bigger and fall under you fingers, providea deeper trough so the tab is steadier and the back rest can be redesigned to help with that. I'm sure ZAGG will figure it out.
Finally because of the cons of the Samsung, I am thinking of ordering one of the knock offs that has the flap that closes on the back like the one for the tab10. I think I've seen it where the while thing, flap included, rolls like the iPad cover.
Finally, Samsung needs to work out the magnet thing, offer a smart cover, which should at least be possible with the phone variants.
I guess the simple answer to you question is mixed feelings about the official cover.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
I ordered two knockoffs for wife and I. When it gets in from China, official covers go back to Best Buy. They offer virtually no protection and are so not worth the $50 each I paid for two.
I have a question to book cover owners: is it possible to rest your wrist on the tablet while taking notes when book cover is in the position like on the attached screen shot? Or your hand is to heavy and you and the magnet will slip of the back?
I would say that that position is ideal for typing and not the best position for resting the palm on especially if you are heavy handed as it's not really designed for taking heavy loads.
Sent from my GT-N8000 using Tapatalk HD
That's not good to hear - that case was next on my shopping list :/
I'm looking for a case that could handle my wrist when taking notes in a position like on the previous screen shoot, probably I will take a look at this one: puro case unfortunately it looks like no one from xda forums is using this one :/
One thing I notice with this case is that it does not cover the camera. I really like that. If you pick it up please review it!
gramm said:
That's not good to hear - that case was next on my shopping list :/
I'm looking for a case that could handle my wrist when taking notes in a position like on the previous screen shoot, probably I will take a look at this one: puro case unfortunately it looks like no one from xda forums is using this one :/
Click to expand...
Click to collapse
Sent from my SCH-I535 using xda app-developers app
gophy said:
One thing I notice with this case is that it does not cover the camera. I really like that. If you pick it up please review it!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This case does in fact cover the camera when folded back.
Does it? Do you have a picture of that?
ReggieTee said:
This case does in fact cover the camera when folded back.
Click to expand...
Click to collapse
I can confirm that yes when the case is folded the back camera is covered. In order to take a picture with back camera you would need to hold up the flap while pushing the on screen capture. Not as difficult as it sounds but you look stupid doing it. I mean if your taking pictures in public with your tablet you look like a tool already so it shouldn't bother you to much. Ill get a picture on here soon.
Sent from my GT-N8013 using xda premium
Do they add much bulk?
Do they make the buttons a bit harder to press (hopefully as my pocket turns on the phone too much now)
Is the rubber robust, or will it stretch/split
That kind of thing.
techguyone said:
Do they add much bulk?
Do they make the buttons a bit harder to press (hopefully as my pocket turns on the phone too much now)
Is the rubber robust, or will it stretch/split
That kind of thing.
Click to expand...
Click to collapse
How do you know when the phone turns on in your pocket?
I use tasker to set profiles,one of them makes a noise when the phone unlocks. Believe me I know when my pocket unlocks my phone.
techguyone said:
Do they make the buttons a bit harder to press (hopefully as my pocket turns on the phone too much now)
Click to expand...
Click to collapse
I don't have this problem since I use a case. I do use Gravity Screen though to turn off my phone if I face the screen downward or flip the phone upside down. I put the phone in my pocket head first, and if at all the power button is hit, the app will immediately turn it off due to the orientation.
I bought this case the day it came out. When I receive it, I will post some pictures and possibly make a short video review. Depending on how many pages this thread gets I'll either update this post or make a new one.
I'm also very interested in this case, and I hope that the grip gets better as it suggests.. Motorola could have done better when they designed the rear shell!
Got my black Grip Shell and a glass screen protector in the mail last night
So far I'm really impressed. I really like the grip shell.
billbradford said:
So far I'm really impressed. I really like the grip shell.
Click to expand...
Click to collapse
From where?
mjjferreira said:
From where?
Click to expand...
Click to collapse
Direct from Motorola. Arrived yesterday.
billbradford said:
So far I'm really impressed. I really like the grip shell.
Click to expand...
Click to collapse
Can you please post a few more pictures from different angles? Also, is the back of the shell the same slippery material as the stock back cover?
Thanks!
I would assume not.
Sent from my XT1034 using XDA Premium 4 mobile app
got my grip shell yesterday, still waiting for the phone to come today. will try to post some pics tonight once i get the phone.
here are some pics:
What is the material of the back cover like? Is it like a grippy, soft touch plastic or is it the same kind of slippery plastic as the default back?
Its the same as the default back
Sent from my Nexus 5 using XDA Premium 4 mobile app
I just ordered the moto g with a royal blue grip shell. I hope I don't regret my choice of color.
That looks damn nice. Guys do you know whether Motorola ships it internationally Or not?
How can I buy it if I'm in Asia ?
Sent from my XT1033 using Tapatalk
The grip is good ? its better than shell stock ?
I waiting for europe shipping ...
Thinking about getting it but what are the measurements with the gripp shell on the phone? Looks a bit wider/taller/thicker.
How is the button feel when they are covered like that?
It's slightly wider, but not much to notice any difference. The buttons respond well. I don't think it adds any thickness at all since its pretty much the same back shell with a bumper attached.
Sent from my XT1032 using XDA Premium 4 mobile app
Des the shell go over the stock shell or does it require the stock shell to come off first?
More questions
Is the rubber able to be peeled off the sides of the screen? And is it nicely glued on to the plastic?
Bought this case new from ebay knowing about its few problems being reported like the proximity sensor, call problems, and audio issues, but still preferred this over the lifeproof simply for its protection. When i first received it, my initial reaction was "wow, its here, and its HUGE!" But i carefully disassembled it and clean it out just in case, water tested it (passed), dried it off, and finally put my phone in its new suit of armor. It really made the phone huge, and i mean huge, but i honestly dont mind the added bulk because of its substantial protection and it still feels very comfy in hand and doesnt hinder the phones functionality at all. Speaker for music also plays very loudly and crystal clear unlike other reviewers have stated. I think its a great case to buy and kind of essential if you have a very physically active life. Now to the cons (although their aren't many): Unlike many other reviewers of the white version have stated, i dont have call proximity issues, only thing that happens related to proximity is when i turn the phone over to face down while playing music, it pauses, but thats expected because i had that motion option enabled. Next, phone calls work fine and i hear people just fine, but the caller on the other end may have a problem hearing you sometimes. But it rarely happens and most times they can hear you. Easy fixes are bluetooth and earphones. Lastly, the home button definitely requires more pressure to press and the menu/back "buttons" are a little harder to get to but you'll get used to it. Thats the only thing "wrong" with this case honestly and its still excellent to have. I would highly recommend it. If you dont mind a little bulk, get it. Again, great great case :good:
I have a brand new one in original packaging from otterbox if anyone wants, contact me through dm or 6785162209
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing. There are many surface scratches on the screen which you can only see if you look at it while the screen is off under a super, super bright light. Doesn't affect the image quality at all. Outside frame (the gray part) is a little cracked in few places. Not a big deal.
Runs flawless on CM 10.2.1. Undervolted almost 100mV across the board.
I used to be OCD, but decided to save my health instead.
Aftcomet said:
Personally speaking, at that kind of bulk, I'd rather shove in a 7200mAh Anker. Protection is nice and all but severely handicaps the phone IMO. If you like bulk, might as well triple your battery life.
Furthermore, if it does get scratched/cracked/broken, it's fairly easy to replace (for most members here). For example, you can swap the camera lens for a few bucks if it does get scratched.
I've had my GS3 for almost two years now. Been completely nude the whole time. No screen protector, nothing.
Click to expand...
Click to collapse
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
bogdaryl said:
I personally liked the armor series for my S3. I only stopped using mine due to needing to put my phone in my pocket and the armor didn't quite fit the bill. I use my lifeproof nud for daily use at work but when out playing around or working at the house I still use my armor series. And you definitely can't beat the otterbox warranty.
Click to expand...
Click to collapse
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
aybarrap1 said:
I myself looked for waterproof. I too believe as you do and went naked on previous phones. But now with a toddler and my part time job in swimming pool service, waterproof was the selling point.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Fair enough. I suppose we don't always have ideal circumstances to our liking.
NexusS4gFreak said:
The only thing that makes me take mines off from time to time are the back and menu buttons but once i have it on it rarely comes off. And yea otterbox has great customer service imo. I love my case
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-T999 using xda app-developers app
Aftcomet said:
Fair enough. I suppose we don't always have ideal circumstances to our liking.
Click to expand...
Click to collapse
LOL...I love my phone being slim and I can live with scratches. But after a few near misses with my toddler son and getting soaked a couple of times on the job, I decided I would have to give in. Bring without my phone even for a day would screw up my schedule. Amazing how much I depend on it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
D00ky said:
I've also bought this case and it turned out to be just what I was looking for. Before I've had Griffin survivor which would be good enough for me except two things, it was not that easy to remove (I prefer naked S3 while not in a hostile environment) and it scratched my S3. After the latter happened I've immediately sold it.
But the reason to post is for everyone with menu/back/home buttons problem. After a proper inspection I've found out that the back cover of the case doesn't give enough support for installed phone. If the phone is fully pushed into the case there is approximately 1.5mm gap between the phone and the back cover. So after first push on menu/back/home button even if the phone is inserted all the way in to the case, the phone backs up a little and that gap moves from the back to the front. In order to solve this problem I've ordered 1.5mm thick silicone sponge to fill the gap between the phone and the back cover. One thing that bothers me about this is that waterproofness of the case might be broken if 1.5mm thick sponge is too much and even bigger problem is how test waterproofness as I don't want to sacrifice my phone. I'll report any pros or cons about my modification. If it solves this problem I'll post some pictures of modification.
Click to expand...
Click to collapse
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
For everyday protection sure it may be good, but when it comes to 10ft drop, water, being hit, stomped on, and numerous other things, the armor case is the best.
monnaliza said:
I've had the Acase Superleggera Pro Dual Protection Case on my S3 since I bought it and I love it. I've dropped it so many times and not noticed any difference in performance. And it's not super bulky like the other 2 layer cases. It's also less than $10 at Amazon these days.
Click to expand...
Click to collapse
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
NexusS4gFreak said:
I tested its waterproof function without phone first and then finally just did it repeatedly with the phone and it hasnt failed me yet, hopefully never. And also ive noticed this gap, i wouldnt recommend filling it because it may compromise as u stated
Click to expand...
Click to collapse
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
D00ky said:
As I've said if not in hostile environment in my case this is mostly dusty air and greasy surfaces, I prefer my S3 naked. So Otterbox Armor is needed.
I tried with 1.5 mm foam and it was just a little too much. Now I am waiting for 1mm which I think it should work. As I've already said, in my case waterproofness is not really needed but I wouldn't like to brake it. Will report again.
Click to expand...
Click to collapse
I finally got 2mm foam as 1mm is hard to get. 2mm foam goes into gaps between ribs on the rubber on the back cover of the case. So this just might do the trick as the case closes ok.
The for the review, I have an Otterbox Defender and love it to death, but I've been thinking of buying one of these.
i have the Acase Superleggera Pro Dual Protection Case on my S3 and it is great!
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
DMF1977 said:
Just got my new otterbox armor today!! Love it so far! Any way to tell if it's legit and not a fake? Lol... Paranoid I guess?
Click to expand...
Click to collapse
Not sure but I think that there's no fakes around. Enjoy it.
D00ky said:
Not sure but I think that there's no fakes around. Enjoy it.
Click to expand...
Click to collapse
Thanks!! But I'm sure there are plenty of fakes around...
I finally got my Voia CleanUP case from Voia.
Was really looking forward to this case, with the quick-open cover and the slick looks that were offered on the website: http://www.voia.co.kr/goods/view?no=362
However after using it for a while I'm extremely disappointed with it, and I feel the quick cover/quick open feature isn't all that useful and somewhat gimmicky. Here's a quick review.
General Notes:
- The transaction was quick and easy, even from Korea. Very nice job by Voia here.
- I've posted an album of the phone installed in the case here: http://imgur.com/a/rJSLJ
Pros:
- Very nice looking case, really like the "brushed metal" look on the front of it.
- Fairly slim, keeps the bulk of the phone down
- The Quick-Open feature is somewhat nice, but also a con. The case doesn't seem to utilize the second screen function any differently than without it, but turning the phone on and off with the flip of the cover is pretty cool. I guess.
- Phone fits snugly and easily in the case
Cons
- The quick-open flap doesn't stay closed, flush with the phone (see photos). This was the most frustrating part for me because it actually makes the phone kind of a pain to just pick up and use since you'll be fumbling with the partially opened cover.
- The Quick-cover feature to turn the phone off and on is pretty poorly implemented. Flipping the case closed to turn off the phone is actually quite nice. However turning it on, especially if you use fingerprints, is a pain. When I open the case I flip the cover all the way back behind the phone. However this completely blocks the fingerprint sensor. So instead you have to flip the case open half way with one hand and use your other hand to put in your fingerprint. I'm not too sure there is much Voia could have done here, but this makes the phone fairly inconvenient to use
- The corner bumpers are just hard plastic. While it offers better than no protection at all, any fall from even a marginally significant height will not be cushioned by the hard plastic. If you drop the phone on the left side where the spine of the cover is, there is absolutely no protection at all. If you're looking for good drop protection for your new V20, I wouldn't go with this
- The volume buttons.... this one doesn't make sense to me. When the case is closed the volume buttons are covered by the spine of the cover. You can still use them, but you have to sort of guess where they are. When the case is open they're, oddly enough, even harder to get to as the folded spine of the cover blocks your thumb from getting right to them. You'll see in the photos.
Overall for about $25 this case was a huge let down. It does more to make the phone inconvenient to use than convenient. I'm going to get in touch with Voia to see about getting a refund. Maybe somebody else will have a different experience.
I've got this case as well & have never been a huge fan of this style of case as it is,at least not for a daily driver:
All cases such as this seem to get in the way of usability one way or the other.
I use mine for those times when I leave the house & know I won't be using the phone much at all,the main benefit being while in-pocket,the front flap serves to protect the phone from other items in my pocket (keys/etc...).
It's a well-crafted case & I don't have the problem with the front flap staying partially open as you do (perhaps check that the phone is fully seated in the case,I had this problem at 1st).However,those looking for bullet-proof protection a la Otterbox should look elsewhere,as this style of case isn't built to withstand anything more than minor bumps/drops/etc....
I recommend this case for those that use this type of case,but,with reservations,as you noted regarding using the fingerprint scanner.
ZeppelinJ0 said:
I finally got my Voia CleanUP case from Voia.
Was really looking forward to this case, with the quick-open cover and the slick looks that were offered on the website: http://www.voia.co.kr/goods/view?no=362
However after using it for a while I'm extremely disappointed with it, and I feel the quick cover/quick open feature isn't all that useful and somewhat gimmicky. Here's a quick review.
General Notes:
- The transaction was quick and easy, even from Korea. Very nice job by Voia here.
- I've posted an album of the phone installed in the case here: http://imgur.com/a/rJSLJ
Pros:
- Very nice looking case, really like the "brushed metal" look on the front of it.
- Fairly slim, keeps the bulk of the phone down
- The Quick-Open feature is somewhat nice, but also a con. The case doesn't seem to utilize the second screen function any differently than without it, but turning the phone on and off with the flip of the cover is pretty cool. I guess.
- Phone fits snugly and easily in the case
Cons
- The quick-open flap doesn't stay closed, flush with the phone (see photos). This was the most frustrating part for me because it actually makes the phone kind of a pain to just pick up and use since you'll be fumbling with the partially opened cover.
- The Quick-cover feature to turn the phone off and on is pretty poorly implemented. Flipping the case closed to turn off the phone is actually quite nice. However turning it on, especially if you use fingerprints, is a pain. When I open the case I flip the cover all the way back behind the phone. However this completely blocks the fingerprint sensor. So instead you have to flip the case open half way with one hand and use your other hand to put in your fingerprint. I'm not too sure there is much Voia could have done here, but this makes the phone fairly inconvenient to use
- The corner bumpers are just hard plastic. While it offers better than no protection at all, any fall from even a marginally significant height will not be cushioned by the hard plastic. If you drop the phone on the left side where the spine of the cover is, there is absolutely no protection at all. If you're looking for good drop protection for your new V20, I wouldn't go with this
- The volume buttons.... this one doesn't make sense to me. When the case is closed the volume buttons are covered by the spine of the cover. You can still use them, but you have to sort of guess where they are. When the case is open they're, oddly enough, even harder to get to as the folded spine of the cover blocks your thumb from getting right to them. You'll see in the photos.
Overall for about $25 this case was a huge let down. It does more to make the phone inconvenient to use than convenient. I'm going to get in touch with Voia to see about getting a refund. Maybe somebody else will have a different experience.
Click to expand...
Click to collapse
Agree with all your remarks. I've emailed Korea to see if they are changing the design at all. For me the biggest drawback is the cover not closing. If I put the phone down face down all the time to keep the case closed there's no point in having the window for the second screen. Will post if I get any satisfaction.
Sent from my Pixel C using Tapatalk
I have the Spigen case, but was considering this one. I wish it would close completely. I would be sold! Thanks for the review. Please keep us updated as to whether they are changing the design.
Sent from my LG-LS997 using Tapatalk
I also have the case.
The pros are the fact that the color actually matches (Titan in my case), It protects more than 80% of the screen when the door is closed and recesses the rear camera so putting it on a table will not scratch it.
I don't have an issue at all with the case door opening. As a matter of fact, I've had a spigen quick view case for my S4 which clipped close and it was a slight pain in the ass.
I like how the view hole doesn't block the camera. I at times wonder if they should have put a hole for the finger print as it is really annoying to open the phone and slip your right hand behind to access the fingerprint scanner. I also don't like how the volume buttons are blocked.
I'm happy with it over any of those worthless cases that only protect the back of the phone.
Also bought this case and is my favorite so far.
I found the following:
Although the cover didn't close all the way initially it now does. The binder side seems to stretch slightly with use until it's flush. Enough time in the pocket and it will become flush.
I wish it had a felt lined inside cover instead of just hard plastic
This case matches the contours really well and you can still enjoy the phone's design.
I really like having all the port side exposed so that cable and headphone blockage isn't an issue.
Joediver53 said:
Agree with all your remarks. I've emailed Korea to see if they are changing the design at all. For me the biggest drawback is the cover not closing. If I put the phone down face down all the time to keep the case closed there's no point in having the window for the second screen. Will post if I get any satisfaction.
Sent from my Pixel C using Tapatalk
Click to expand...
Click to collapse
Just received full refund from Korea. Told me to keep the case. I'd definitely buy it again if they fix the fit.
Sent from my Pixel C using Tapatalk
I have had the case about a week. Mine stays closed... perhaps a screen protector binding?
Very well made but yes you need to remember to use the fingerprint sensor with your right hand while opening. I find myself using the dot password more like I did on my g3 with the same type case. About ready to take a gromit hole punch and make a hole for my finger sensor : )
The materials are very slippery both closed and open. the one on my g3 was not nearly as slippery. Thinking of ideas to solve this that are clean.
I do like the protection for the front as I am hard on screens and dont like protectors.
It is also very thin which i like but as others mentioned not much protection. i dropped my g3 with a similar case several times. Some damage on the corners but the screen always survived. The case cracked on 3 corners : )
I switched to a tpu type case for a trip to Disneyland in case of dropping it but the thickness was a real pain. Jury is still out ...
Thanks to the OP for the review on this case (and for the heads up since I didn't know about this one yet) because I think I'll have to check it out, but I just a couple quick questions for anyone who might know.
How long did shipping take for you guys who have yours already? Also I bought a cheap flip case the day I got mine from Amazon and it's actually not as bad as I thought it would be, but does anyone know it it's possible to have the screen unlock when you flip it open but still be able to use your fingerprint everywhere else? Everytime I flip it open I have to put my pin number in (which I'd rather have it go straight to the screen) but if I want to disable it it also disables my fingerprint, does it anyone know if there's a way around that?
Sent from a ridiculously modified ColecoVision
Important update. Due to the hard plastic around the viewing window, it can cause scratches on your screen. I have a rectangular mark on the screen that can't be removed. This is a VERY STUPID move on the maker's part. How idiotic can a designer be?
esqueue said:
Important update. Due to the hard plastic around the viewing window, it can cause scratches on your screen. I have a rectangular mark on the screen that can't be removed. This is a VERY STUPID move on the maker's part. How idiotic can a designer be?
Click to expand...
Click to collapse
Ok now damn that would certainly be one hell of a deal breaker imo! Sorry to hear about that with your phone and I hope you don't take this the wrong way because I'm definitely not trying to say you're mistaken or anything (I don't even have the case so I couldn't argue without what you're saying even if I could to), but I'm just wondering can anyone else who has this case also confirm this?
Sent from a ridiculously modified ColecoVision