I have a bad feeling I know the answer to this already, but I'm gonna hold my breath and see.
Original Kinle Fire, rooted with TWRP. I installed stock 4.3 modded for the Kindle Fire, but when booting it showed half of the word "ANDROID" on the screen and just hung there. So I flashed the stock Kindle Fire rom (update,zip). Then immediately after flashing it, I thought, hey I didn't try wiping the cache before flashing 4.3. So I wiped the cache and flashed 4.3. Rebooted and it was still hung on the boot screen, but now I have no TWRP to recover from. The kindle stock rom killed root access and custom bootloader. I hooked it up to the Kindle Fire Utility and it shows offline. So no ADB, no custom recovery... Anyone know a super magic trick?
*SOLVED*
Looks like I need a factory cable.
Related
Hi, first of all, sorry for my poor english
So i installed succesfully the root and twrp with the kindle fire utility, so i installed a custom ROM, but when i rebooted de KF, the triangle logo just disappeared and i could not get more in the twrp.
In a moment of madness, i tried to boot the twrp using goo manager, but when i rebooted the kindle fire was stuck at cyanogen mode, i am just desperate, please help me!!!!!!!!!!!
did you wipe fully before installing the rom? Go back (in kfu) and reinstall root ,fff ,twrp , this time wipe fully ,re install the rom , It will be long wait , be patient the cyangen wheel spins forever ,just wait it will load
I wanted to get 4.2.2 on my fire2, so I went throught the tutorials to root and install twrp recovery which worked great. I downloaded the CM10.1 sgt7 and gapps for the fire 2 in the dev section and proceeded to reboot into recovery. I wiped the system and flashed the rom and gaps, wiped cache/dalvik and hit reboot.
dreaded kindle fire boot loop. The only thing I can think is that the rom DL was corrupted. It really didn't take long to complete the flash in twrp, probably less than 10 seconds. I really should have checked the md5.
OK, so I get a fastboot cable online and it shows up today. I can't seem to locate a tutorial of how to restore with fastboot though... can someone point me to a link?
Thanks,
-J
miatawnt2b said:
I wanted to get 4.2.2 on my fire2, so I went throught the tutorials to root and install twrp recovery which worked great. I downloaded the CM10.1 sgt7 and gapps for the fire 2 in the dev section and proceeded to reboot into recovery. I wiped the system and flashed the rom and gaps, wiped cache/dalvik and hit reboot.
dreaded kindle fire boot loop. The only thing I can think is that the rom DL was corrupted. It really didn't take long to complete the flash in twrp, probably less than 10 seconds. I really should have checked the md5.
OK, so I get a fastboot cable online and it shows up today. I can't seem to locate a tutorial of how to restore with fastboot though... can someone point me to a link?
Thanks,
-J
Click to expand...
Click to collapse
Can you get into recovery?
Always factory reset when flashing a ROM that is completely different from the one already installed, or you will run into a bootloop.
I was able to get it back. Been running 422 for a few months. I had a bad Roman do from what I can tell. I was not able to get to recovery without restoring with a fastboot cable.
So I rerooted my Kindle with the new KFU and everything went fine. While wipe the device for a new Rom, the Kindle is now stuck wiping .android_secure.
Any help?
I got it figure
Hi all, I really tried searching everywhere in the forum to solve my issue and I couldn't find anything specific, so I'll try and explain what's happened to me:
This is the first time I tried to install custom roms in my kindle, so I instaled TWRP and FFF and went to install the Rom I downloaded. I had an error message and just couldn't install it... So I wen't to restore my stock backup and just couldn't either. I then tried to install the stock firmware and what happened is that it didn't install the stock firmware properly!
So I'm stuck at the boot logo image, with no OS and no TWRP, FFF, Root or anything... I connect the kindle to my pc (windows) and open kindle fire utility (0.9.9) and I get ADB Status: Online but Boot Status: Unknown... When I try to reinstall TWRP, KFU tries to reboot it in fast boot mode but gets stuck at waiting for device...
How the hell can I get access to my kindle so I can install TWRP again???
marcelotedeschi said:
Hi all, I really tried searching everywhere in the forum to solve my issue and I couldn't find anything specific, so I'll try and explain what's happened to me:
This is the first time I tried to install custom roms in my kindle, so I instaled TWRP and FFF and went to install the Rom I downloaded. I had an error message and just couldn't install it... So I wen't to restore my stock backup and just couldn't either. I then tried to install the stock firmware and what happened is that it didn't install the stock firmware properly!
So I'm stuck at the boot logo image, with no OS and no TWRP, FFF, Root or anything... I connect the kindle to my pc (windows) and open kindle fire utility (0.9.9) and I get ADB Status: Online but Boot Status: Unknown... When I try to reinstall TWRP, KFU tries to reboot it in fast boot mode but gets stuck at waiting for device...
How the hell can I get access to my kindle so I can install TWRP again???
Click to expand...
Click to collapse
I'm guessing you didn't factory reset in recovery before restoring the stock firmware? You need a factory cable.
same issue but I have twrp and fff on mine
When i got the kindle it had nipad ( everything was in chineese) and stock rom (english) installed. the stock rom kept having errors. I installed twrp and fff on the kindle. during the stock install I must have wiped the os some how. when I try to flash the rom it errors, see attached picture. now it won't go past the kindle fire logo unless i put it in recovery. Thank you for any help.
Today my brother clicked factory reset under settings in CM 11 and Kindle booted into TWRP. I've wiped and installed system like normal but it just boots back to TWRP. blue kindle fire 2 screen comes up while booting. then TWRP. I have 3 zips for different roms which i've used in the past and they work.
I have mounted system and installed the zips. nothing. anyone got any help for a guy?