Related
Please help me root and put cwm on my phone.
My current android version is 4.0.4 stock rom.
I am living here in the Philippines.
Hi slyzzz
you will need to revert your lu6200 back to gingerbread (stock firmware version 135), then follow the guide found on this forum to root and install cwm.
On stock 4.0.4 (i assume your are on software version of lu620161 (check your version under setting) you won't be able to root your phone depending on how you updated your phone.
n
I am now on 160. Could you give me the link to the thread? Cant actually find it.
slyzzz said:
Please help me root and put cwm on my phone.
My current android version is 4.0.4 stock rom.
I am living here in the Philippines.
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=1681886
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
For flashing the KDZ file you better use this version of updater, i already integrated the windows enabler in it. So no need to install / activate the windows enabler: https://www.dropbox.com/s/0x75ol8y4uwz69r/KDZ_FW_UPD_EN.rar
Make sure you are in USB debugging mode, or better close your phone... hold Volume up and power button. This get you into download mode and now you can start the update tool for flashing the KDZ file.
After install finished you root your phone: https://www.box.com/s/891052e09272fb345bc8
If root process finished you can bring CWM onto you phone: http://115.com/file/c26taagr#RecoveryNEW.zip
If all that is done, you should be able to flash any ICS custom ROM available for the moment.
Good luck and if you have more questions, let it out.
cannot download the KDZ
And here software KDZ:
http://www.mediafire.com/?wx6fr4v736wyutv
Click to expand...
Click to collapse
chuyennho184 said:
And here software KDZ:
Click to expand...
Click to collapse
THE KDZ file not the KDZ Installer
Karry025 said:
THE KDZ file not the KDZ Installer
Click to expand...
Click to collapse
You want to stock rom version 162. And here is the link:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGLU6200/ALGTBK/LU620162_00/LU620162_00.kdz
Click to expand...
Click to collapse
KDZ software is used to flash stock rom.
Need Engineer Version of 142
Cromson said:
Try this thread: http://forum.xda-developers.com/showthread.php?t=1681886
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
For flashing the KDZ file you better use this version of updater, i already integrated the windows enabler in it. So no need to install / activate the windows enabler: https://www.dropbox.com/s/0x75ol8y4uwz69r/KDZ_FW_UPD_EN.rar
Make sure you are in USB debugging mode, or better close your phone... hold Volume up and power button. This get you into download mode and now you can start the update tool for flashing the KDZ file.
After install finished you root your phone: https://www.box.com/s/891052e09272fb345bc8
If root process finished you can bring CWM onto you phone: http://115.com/file/c26taagr#RecoveryNEW.zip
If all that is done, you should be able to flash any ICS custom ROM available for the moment.
Good luck and if you have more questions, let it out.
Click to expand...
Click to collapse
Hey Man,
I have been reading your posts in the whole forum regarding LTE LU6200 ... I want to get my hands on Engineer version but I can't seem to understand the Chinese even with translation. The site ain't giving me direct link... I think i need to get register on the site which requires a Chinese phone number ... which I dont' have... is there any way you could share this on dropbox? etc? coz I can't/dont' know how to download from 115.com :S
aatish said:
Hey Man,
I have been reading your posts in the whole forum regarding LTE LU6200 ... I want to get my hands on Engineer version but I can't seem to understand the Chinese even with translation. The site ain't giving me direct link... I think i need to get register on the site which requires a Chinese phone number ... which I dont' have... is there any way you could share this on dropbox? etc? coz I can't/dont' know how to download from 115.com :S
Click to expand...
Click to collapse
Hi,
i will upload it tonight on another filehoster, since i'm really busy now.
Cromson said:
Hi,
i will upload it tonight on another filehoster, since i'm really busy now.
Click to expand...
Click to collapse
Thank you very much!
You can flash the ICS engineer version in order to get root: http://115.com/file/e79w9lmj#LU620042-00.kdz
Click to expand...
Click to collapse
so, if I flash this rom, then I no need to root,right ? so, please help make a other link, I can't download from this Chinese host. it's better if mediafire or other one.
Can somebody upload the CWM touch recovery image? I cant find it anywhere.
Could someone guide me how to unroot and restore my phone to factory. I have galaxy s3 t999. have tried many hours always hit a dead end.
edcantu9 said:
Could someone guide me how to unroot and restore my phone to factory. I have galaxy s3 t999. have tried many hours always hit a dead end.
Click to expand...
Click to collapse
Flash stock firmware with Odin.
Factory reset.
Aerowinder said:
Flash stock firmware with Odin.
Factory reset.
Click to expand...
Click to collapse
Hey thanks for the quick reply!
Yeah I followed this guide at a blogspot website.
It had me flash it with WICKED v10. It didn't work so now I just want it back to normal and I will purchase a sim unlock code from somewhere.
I followed another guide on youtube on how to get it back to stock which I followed.
For the most part it took off most of the Wicked stuff but on the lock screen it still says WICKED and there is an icon with utilities for it, So I am guessing it is not completely removed??
I tried using the phone reset function but still it remains??
Any advice would be greatly appreciated!!!
edcantu9 said:
Hey thanks for the quick reply!
Yeah I followed this guide at a blogspot website.
It had me flash it with WICKED v10. It didn't work so now I just want it back to normal and I will purchase a sim unlock code from somewhere.
I followed another guide on youtube on how to get it back to stock which I followed.
For the most part it took off most of the Wicked stuff but on the lock screen it still says WICKED and there is an icon with utilities for it, So I am guessing it is not completely removed??
I tried using the phone reset function but still it remains??
Any advice would be greatly appreciated!!!
Click to expand...
Click to collapse
Just out of interest, if you go to Menu > About Device, what does it say for Model Number, Android Version and Baseband Version? These will help determine the next steps.
Thanks.
Bass_Man25 said:
Just out of interest, if you go to Menu > About Device, what does it say for Model Number, Android Version and Baseband Version? These will help determine the next steps.
Thanks.
Click to expand...
Click to collapse
Model: SGH-T999
Version: 4.1.1
Baseband Version: T999LUVAMB7
Build Number: Wicked_v10_Tmobile
Thank you very much.
If you could get me pointed in the right direction that would be great!
edcantu9 said:
Model: SGH-T999
Version: 4.1.1
Baseband Version: T999LUVAMB7
Build Number: Wicked_v10_Tmobile
Thank you very much.
If you could get me pointed in the right direction that would be great!
Click to expand...
Click to collapse
Take a look at this thread: http://forum.xda-developers.com/showthread.php?t=1949687.
On the first post, you'll see the firmware under ***root66***. Click "Show Content" to get the listing of zip files. Under the T999 heading (not T999L), grab the zip file for T999_UVDMD5 - Official JB Firmware - Latest JB 4.1.2 Firmware.
Once you have that, scroll down to the second post - it will tell you how to flash that file via Odin (as well as download links in case you don't have Odin). This will return your phone to stock everything (including recovery) but with Root injected into it so you can flash a custom recovery after the reset. It will also upgrade you to Version 4.1.2.
Good luck.
--EDIT-- You'll need to go to the second post to the part entitled, "How to Flash the Stock Firmware" and the sub-heading "Using Odin".
edcantu9 said:
It had me flash it with WICKED v10. It didn't work so now I just want it back to normal and I will purchase a sim unlock code from somewhere.
I followed another guide on youtube on how to get it back to stock which I followed.
For the most part it took off most of the Wicked stuff but on the lock screen it still says WICKED and there is an icon with utilities for it, So I am guessing it is not completely removed??
I tried using the phone reset function but still it remains??
Click to expand...
Click to collapse
You followed the Wrong Guide. You follow the Root66 Thread. Since you don't even want your phone to be rooted, you may want to download the Stock firmware from Sammobile.
cantssp surface
Perseus71 said:
You followed the Wrong Guide. You follow the Root66 Thread. Since you don't even want your phone to be rooted, you may want to download the Stock firmware from Sammobile.
Click to expand...
Click to collapse
I did flash with ODIN the stock firmware but as stated it still says WICKED on lock screen and in apps there is a control panel for it. So it is still not all gone. Just want the phone as it came in box in first place. The link you gave me is very confusing. I know a lot about many subjects and can learn quickly, but right now I just need a guide that step by step tells me how to do it.
Bass_Man25 said:
Take a look at this thread: http://forum.xda-developers.com/showthread.php?t=1949687.
On the first post, you'll see the firmware under ***root66***. Click "Show Content" to get the listing of zip files. Under the T999 heading (not T999L), grab the zip file for T999_UVDMD5 - Official JB Firmware - Latest JB 4.1.2 Firmware.
Once you have that, scroll down to the second post - it will tell you how to flash that file via Odin (as well as download links in case you don't have Odin). This will return your phone to stock everything (including recovery) but with Root injected into it so you can flash a custom recovery after the reset. It will also upgrade you to Version 4.1.2.
Good luck.
--EDIT-- You'll need to go to the second post to the part entitled, "How to Flash the Stock Firmware" and the sub-heading "Using Odin".
Click to expand...
Click to collapse
I got the firmware you stated. unzipped it. stated firmware is invalid. any other suggestions?
edcantu9 said:
I got the firmware you stated. unzipped it. stated firmware is invalid. any other suggestions?
Click to expand...
Click to collapse
Odin says invalid firmware?
edcantu9 said:
I got the firmware you stated. unzipped it. stated firmware is invalid. any other suggestions?
Click to expand...
Click to collapse
When you unzipped, what did you get as output ?
[guide] install at&t kitkat e980 stock flash + root + recovery - complete wipe !
FOR AT&T LG E980:
Basically, from my experience I put together this guide for anyone who wishes to flash a complete stock AT&T KitKat from .TOT file and the root and add recovery.
All the steps are what I have gathered from around the forums, SO I WILL GIVE CREDIT FOR STEPS THAT ARE OUTLINED BY OTHERS. These people helped by their postings.
FLASHING TOT FILES:
1. The BEST - I think a lot of us can agree - thread for the LG E980 flashing with STOCK firmware is this by HYELTON http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1
STOP OVER THERE AND GIVE THE MAN SOME LOVE AND THANKS !!!!
.TOT files and .Kdz files for all versions can be found at Hyelton's thread above. Also, more details for flashing .TOT vs .Kdz files there. Below is some tips from my experience.
Here is the exact TOT file I used: http://www.mediafire.com/download/djjmck2eost77e3/BIN_LGE980AT-00-V20g-ATT-US-APR-28-2014+0.tot
SOME OF MY TIPS: FROM MY EXPERIENCES
2. The only hitch is getting LGFlash Tools and hacking it. I tried the links on Hyelton’s thread but some are now too new to be hackable. For example, one must find the reg key for the new version of LGTools he links to. Megalock.dll is hit-or-miss. There are other ways for sure but I did not bother further.
3. I found that lower versions of LG Flash Tool (v 1.4.1330R) works just fine.
EDIT: The latest version of LG Flash Tools is here http://www.mediafire.com/download/6g1uyoz2zsiqq1c/LG+Phone+Flash+Stuff.rar
And it contains the DLL to be used during flashing. I STRONGLY SUGGEST USING THIS. You MUST -MUST- TURN OFF INTERNET WHEN USING FLASH TOOLS. This pack contains the full software, and dll files. I have flashed using just this package >10 times at least while testing roms
a.Connect phone and let Windows install drivers. In my case, Windows 8 default were just fine.
b.Put your phone in download mode.
c.Connect it to your computer. In case of windows 8 the windows default drivers work fine.
d.Follow Hyelton’s steps.
EDIT: See posts #32and #33 in this thread. Do not go back to download. But wait for fastboot to install. See post #33 for this. Just wait patiently, the phone will reboot to full normal mode/setup screen, then the LG tools will say pass. BE VERY PATIENT.
ROOTING AND RECOVERY:
ROOTING:
THANKS TO jarari2:
1.This method here works just fine: http://forum.xda-developers.com/showthread.php?t=2699067
Simple bat file method. Turn ON USB Debugging before trying.
2.RECOVERY:
THANKS TO hoangnova AT http://lgviet.com/forum/threads/moi-thu-ve-lg-g-pro-4-4-2-root-recovery-kdz.14841/
** Download and move following file to phone.
** https://docs.google.com/file/d/0B4vSbKccbcIOV1NjMDlqWUdmVm8/edit?pli=1
OR
** https://onedrive.live.com/redir?resid=1F371A0EDB2BC3A6!107
** Run apk. Done.
You should have a full stock KitKat + Rooted + Recovery… Enjoy!!
If this guide helped you, you can buy me a beer/coffee or any such wonderful drink.
chappatti said:
FOR AT&T LG E980:
...
If this guide helped you, you can buy me a beer/coffee or any such wonderful drink.
Click to expand...
Click to collapse
The download on the google drive says it's non-existent.
Nice guide. Thanks!
jdk2 said:
The download on the google drive says it's non-existent.
Edit: Here's the file: http://forum.xda-developers.com/attachment.php?attachmentid=2715141&d=1398757138
Click to expand...
Click to collapse
THANKS ! Fixed !!
Where can I find the .TOT file?
ducktat said:
Where can I find the .TOT file?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=44983841&postcount=1
ducktat said:
Where can I find the .TOT file?
Click to expand...
Click to collapse
I decided to just link directly to the actual TOT file I used.....!
Link in OP.
Roots Perfectly
Upgraded to KK 4.4.2 via OTA and rooted follow the directions contained here and every worked perfectly! Thanks for gathering the information!
MDMTahiti said:
Upgraded to KK 4.4.2 via OTA and rooted follow the directions contained here and every worked perfectly! Thanks for gathering the information!
Click to expand...
Click to collapse
No Problem.
To do the OTA I guess you went back to complete stock ? Yeah, that is a good option too....! Only, it requires one extra flash (going back to stock!)
Just for info, can you please add the steps to your post.
Thanks.
Where to download AT&T kitkat upgrade ?
lchen5 said:
Where to download AT&T kitkat upgrade ?
Click to expand...
Click to collapse
In the OP and in my thread
hyelton said:
In the OP and in my thread
Click to expand...
Click to collapse
Hey, hyelton, thanks for visiting,,!
The steps
chappatti said:
No Problem.
To do the OTA I guess you went back to complete stock ? Yeah, that is a good option too....! Only, it requires one extra flash (going back to stock!)
Just for info, can you please add the steps to your post.
Thanks.
Click to expand...
Click to collapse
I went back to pure stock and no custom recovery, then did the 10p update - I found that the update to 10p would not work with other than stock recovery. I then just used the settings query for OTA update, downloaded and installed - all my programs and data were intact after the update, except apps requiring root would not run correctly. I then followed your steps to root. I still have the stock recovery at this point. KitKat runs great.
MDMTahiti said:
I went back to pure stock and no custom recovery, then did the 10p update - I found that the update to 10p would not work with other than stock recovery. I then just used the settings query for OTA update, downloaded and installed - all my programs and data were intact after the update, except apps requiring root would not run correctly. I then followed your steps to root. I still have the stock recovery at this point. KitKat runs great.
Click to expand...
Click to collapse
So when going back to complete stock the 10p, how did you keep apps, settings if you used odin.? Just interested in your procedure since obviously OTA on stock will retain programs and settings.
It just worked...
chappatti said:
So when going back to complete stock the 10p, how did you keep apps, settings if you used odin.? Just interested in your procedure since obviously OTA on stock will retain programs and settings.
Click to expand...
Click to collapse
Honestly, I don't know. I had been flashing lots of different ROMS and then went back the total day 1 stock. I then updated OTA to 10p a couple of months ago and rooted but did not flash a custom recovery. I then heard that 4.4.2 was available, checked via the about link and downloaded. All the apps and data stayed in place. I then rooted and have yet to flash a custom recovery. I'm sorry I can't give you more detail. But I can tell you that I seem to have better battery life, and I had to pair my phone to my car again. Good luck.
i miss network connection
hi, i follow your steps, and it worked, i have KK now on my e980.
but... sometimes i lost my network connection, and it returns in a minute or two
any ideas?
With the recovery installed from this thread. Can we flash non stock custom roms or just stock roms.
Sent from my HTC One using XDA Premium 4 mobile app
Problems flashing.
Hey! I can't flash the .TOT, the Flash Tool doesn't recognize port COM41, or any other. I go to device administrator, and there's my phone as port 41, but the Flashing Tool doesn't. Any ideas?!
Ink Rampant Wolf said:
Hey! I can't flash the .TOT, the Flash Tool doesn't recognize port COM41, or any other. I go to device administrator, and there's my phone as port 41, but the Flashing Tool doesn't. Any ideas?!
Click to expand...
Click to collapse
Here is the detailed thread for using Lg flash tool. Http://forum.gsmhosting.com/vbb/f17...flashv141-free-no-need-b2b-user-pass-1628819/
I guess you changed yiu computer date and time before using it as mentioned in OP??
Also what Rom are you coming from? Is your bootloader unlocked/lokified?
Can you guys help me out? I already rooted using towelroot. Is it possible to just install the apk for recovery without doing the other steps?
Sent from my Nexus 5 using Tapatalk
Jacob030 said:
Can you guys help me out? I already rooted using towelroot. Is it possible to just install the apk for recovery without doing the other steps?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I have not used towelroot ever. BUT, I do not see why you cannot add a recovery irrespective of root method. I have done this mtself.
Sent from my GT-N8013 using XDA Free mobile app
i have a samsung galaxy i747
that i have rooted running on 3.4.93 cyanogenmod
android version 4.4.3
i have recently received an unlock sim code i have been waiting on and every time i try to use it it will not work
and i am unable to access the secret menu any more i have tried to fix it to let me but it still wont so if anyone has any info on what i may be doing wrong or something for me to try that would be great thank u
You probably need to be running stock touchwiz.
DocHoliday77 said:
You probably need to be running stock touchwiz.
Click to expand...
Click to collapse
can u link me to a tut on how to install
imevilbob said:
can u link me to a tut on how to install
Click to expand...
Click to collapse
First you'll need to know which bootloaders you're on.
Get terminal emulator and type in:
Code:
su
getprop ro.bootloader
That will tell us which version you have to flash.
Stock firmwares can be found here or on sammobile.com
ok ok ok. i thought i was patient!
kudos,points,smilies, thanks and :beer:/:soda: to docholiday77 & BWolf56.
AND..... to ALL other helper-outers of us newbs!!
err on the side of kindness
BWolf56 said:
First you'll need to know which bootloaders you're on.
Get terminal emulator and type in:
Code:
su
getprop ro.bootloader
That will tell us which version you have to flash.
Stock firmwares can be found here or on sammobile.com
Click to expand...
Click to collapse
i have bricked my phone -.-
imevilbob said:
i have bricked my phone -.-
Click to expand...
Click to collapse
We're gonna need more info to help you.
Post everything you did.
BWolf56 said:
We're gonna need more info to help you.
Post everything you did.
Click to expand...
Click to collapse
i got a rom zip that was supposed to be the stock rom for my phone tried to install from the recovery mode then it seem like everything was going to work fine now the phone wont turn on
imevilbob said:
i got a rom zip that was supposed to be the stock rom for my phone tried to install from the recovery mode then it seem like everything was going to work fine now the phone wont turn on
Click to expand...
Click to collapse
Did you first check which bootloaders who had like I mentioned?
What version of "stock" did you flash?
Did you factory reset in recovery?
imevilbob said:
i got a rom zip that was supposed to be the stock rom for my phone tried to install from the recovery mode then it seem like everything was going to work fine now the phone wont turn on
Click to expand...
Click to collapse
Where did you get the ROM zip? Were you running a stock or custom recovery? What bootloader was on your phone? Are you sure the ROM was for your i747?
Similar issue, not bricked please advise
audit13 said:
Where did you get the ROM zip? Were you running a stock or custom recovery? What bootloader was on your phone? Are you sure the ROM was for your i747?
Click to expand...
Click to collapse
I have same basic question as OP. I am currently running CM 11 7/27 nightly. Bootloader is I747UCUEMJB. Custom Recovery is TWRP 2.7.0.0 I recently requested and received carrier unlock code from AT&T and have not been able to unlock. I am very happy with current state and would like to return as configured after change to enable unlock. After running TriangleAway, when booting into download, the following is listed:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECURE BOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 2
Advice as to how to proceed would be greatly appreciated.
wash23 said:
I have same basic question as OP. I am currently running CM 11 7/27 nightly. Bootloader is I747UCUEMJB. Custom Recovery is TWRP 2.7.0.0 I recently requested and received carrier unlock code from AT&T and have not been able to unlock. I am very happy with current state and would like to return as configured after change to enable unlock. After running TriangleAway, when booting into download, the following is listed:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECURE BOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 2
Advice as to how to proceed would be greatly appreciated.
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showthread.php?t=2722660
audit13 said:
This might help: http://forum.xda-developers.com/showthread.php?t=2722660
Click to expand...
Click to collapse
Thanks for your reply. I am currently exploring enewman17 guide to restoring. I will report with results.
wash23 said:
Thanks for your reply. I am currently exploring enewman17 guide to restoring. I will report with results.
Click to expand...
Click to collapse
Successfully restored to stock using guide at http://forum.xda-developers.com/showthread.php?t=2658486 by enewman17, Everything went smoothly except WiFi will not turn on.
Hi I am hoping I can find some answers here .
I flashed twrp to my s tab using odin and had no problems flashing it to the device.
After flashing I tried to enter recovery mode with vol up, home and power keys, I instead get brought back into download mode with an error of "could not do normal boot".
This is a Japanese docomo tablet and Im not sure if its the bootloader that is locked. I have tried other things such as CF Autoroot, Nexus root kit etc to unlock the bootloader with no success. Ping pong doesnt work as my rom is not supported. Ive been trying for 2 days to get both my S6 and my tablet unlocked and tring to get rid of the bloatware on these devices.
Any help will be greatly appreciated.
Which twrp did you flash?
I suggest you download the stock rom for your model.
At least you can get into download mode and recover.
ashyx said:
Which twrp did you flash?
I suggest you download the stock rom for your model.
At least you can get into download mode and recover.
Click to expand...
Click to collapse
I used the latest one from the twrp website klimtwifi. I then also tried your one in your thread but no luck.
I have been trying to get the stock rom and cant find it anywhere.
I have a docomo carrier branded device. I have a spare untouched tab here and wanted to backup the stock rom and flash it back to the one with problems.
Is there a tut I can get a link to that can show me how to do it without being rooted?
tegstar83 said:
I used the latest one from the twrp website klimtwifi. I then also tried your one in your thread but no luck.
I have been trying to get the stock rom and cant find it anywhere.
I have a docomo carrier branded device. I have a spare untouched tab here and wanted to backup the stock rom and flash it back to the one with problems.
Is there a tut I can get a link to that can show me how to do it without being rooted?
Click to expand...
Click to collapse
You can find the stock rom at sammobile and samsung-updates
ashyx said:
You can find the stock rom at sammobile and samsung-updates
Click to expand...
Click to collapse
Thanks for the info, managed to flash back and get into recovery.
If the bootloader is locked is there any chance of root or twrp at all?
tegstar83 said:
Thanks for the info, managed to flash back and get into recovery.
If the bootloader is locked is there any chance of root or twrp at all?
Click to expand...
Click to collapse
Root yes, custom recovery no. Are you sure you are bootloader locked?
What is your exact model version?
You can use Samsung phone info from the play store.
ashyx said:
Root yes, custom recovery no. Are you sure you are bootloader locked?
What is your exact model version?
You can use Samsung phone info from the play store.
Click to expand...
Click to collapse
The model version is SC-03G
Product code: SM-T707DTSEDCM
Bootloader : SC033GOMU1ANKD
Kernel: 3.4.0-3402897
Build date : TUE NOV 25 22:29.39 KST 2014
Also says "root existence: Yes"
Dont know what the last part means. Im guessing it means I can root the phone and get rid of carrier bloat?
I also have an S6 Hoping I can root/custom recover too
Root existence means your tablet is already rooted!
I'd double check by downloading root validator from play.
Is this a wifi only model as it's unusual for wifi models to have locked bootloaders?
ashyx said:
Root existence means your tablet is already rooted!
I'd double check by downloading root validator from play.
Is this a wifi only model as it's unusual for wifi models to have locked bootloaders?
Click to expand...
Click to collapse
This is a LTE version tablet.
I used root validator and it says that root unavailable "su/id/echo did not execute"
. .
ashyx said:
. .
Click to expand...
Click to collapse
??? Any clue on this?
tegstar83 said:
??? Any clue on this?
Click to expand...
Click to collapse
Have you tried kingroot posted on this forum.
ashyx said:
Have you tried kingroot posted on this forum.
Click to expand...
Click to collapse
gave both the android app and the computer version a go with no luck.
I rooted the SC 03G by link of @Tetsuri: http://wiki.tesuri.org/Android-SC03G-root
But after installed Xposed and edited something my TabS was bootloob =.=
Does anyone have stock firmware of SC 03G T707D (Docomo)??? I searched on Sammobile but does not have for T707D , just T707V only.
any solutions?
hellboy_ftu said:
I rooted the SC 03G by link of @Tetsuri: http://wiki.tesuri.org/Android-SC03G-root
But after installed Xposed and edited something my TabS was bootloob =.=
Does anyone have stock firmware of SC 03G T707D (Docomo)??? I searched on Sammobile but does not have for T707D , just T707V only.
any solutions?
Click to expand...
Click to collapse
There are only two firmwares listed here : http://samsung-updates.com/device/?id=SC-03G
I checked that link and it seems to be for the SC03GOMU1AOC2 version.
Im running the SC03GOMU1ANKD version. Do you know if this will work?
tegstar83 said:
There are only two firmwares listed here : http://samsung-updates.com/device/?id=SC-03G
I checked that link and it seems to be for the SC03GOMU1AOC2 version.
Im running the SC03GOMU1ANKD version. Do you know if this will work?
Click to expand...
Click to collapse
AOC2 is an update to ANKD so should work fine.
hellboy_ftu said:
I rooted the SC 03G by link of @Tetsuri: http://wiki.tesuri.org/Android-SC03G-root
But after installed Xposed and edited something my TabS was bootloob =.=
Does anyone have stock firmware of SC 03G T707D (Docomo)??? I searched on Sammobile but does not have for T707D , just T707V only.
any solutions?
Click to expand...
Click to collapse
That worked and given me root permissions now. knox is now tripped though.
Any apps or things I can be pointed at to allow me to remove bloat.
Also I wanted to know about firmware updates.
How will I be affected by installing OTA updates? There is an update in the system which auto downloaded and I still have the notification for it.
System app remover and titanium backup for bloat.
If you already have the ota then it may still install.
If not you can install it via odin.
May be we won't update new firmware by OTA after rooted. i checked by myself. Anyway do you know when we have Lollipop for TabS T707D, because T707V (Verizon) already have 5.0.1.
Thanks for the link @tegstar83 thought I searched on Bing found it, google have no clue ^^'
Any one know about docomo phonebook? It runs under com.android.contacts is it ok to delete/ uninstall that app?