Hi all, I have 4.1.1 XS phone that tried to be connected to Wifi network using below details:
EAP: TLS
Phase2: None
CA certificate: corporate certificate
User certificate: my personal certificate
Identity: my email
Anonymous identity: <blank>
Password: <blank>
But the wifi shows either Connecting or Authentication problem. Is there any solution for this?
Related
Most probably this is a stupid question for all of you out there, so please help me.
I got the following settings from Base Operator in Belgium but I can't find where I need to input this info.
The info which I got:
Homepage: http://wap.base.be
Type connection: passthrough (this is transalated from dutch:doorlopend)
Connection Security(transalated): off
Type: DATA
Number: +32486927927
IP port : for wap1:9201 wap2:5080
IP adress 172.031.198.037
verification type: Normal
Data Type: ISDN
Speed: 9600
user name: Base
Password: 1234
Where do I have to insert all that info so that I can get a wap connection with my Blue Angel.
P.S. Base does NOT have GPRS
Hi everyone,
I have an unlocked Rogers S621 that I am using here in the US with T-mobile. I cant seem to get MMS to work. Can anyone help?
Go to Start > Settings > Connections > GPRS
Create 3 GPRS profiles named "T-Mobile MMS" "T-Mobile Data" & "T-Zones" with following settings:
Connects to: WAP network
Access point: wap.voicestream.com
User name: (blank)
password: (blank)
Authent type: None
Prim. DNS: 0.0.0.0
Secon. DNS: 0.0.0.0
IP address: (blank)
then go to > Connections > Proxy
create a proxy profile named "T-Zones Proxy" with following settings:
Connects from: WAP network
Connects to: the internet
proxy(nameort): 216.155.165.50:8080
type: http
blank for user name and password
Now go to Start > Messaging
Scroll to MMS, while MMS is selected press Menu > Settings > Menu > MMSC Settings
Delete anything in here, then create new profile "T-Mobile MMS" with following:
Name: T-Mobile MMS
MMSC URL: http://216.155.174.84/servlets/mms
wap gateway: 216.155.165.50
port: 8080
connect via: wap network
max sendin size: 300k
wap version: wap 2.0
That's how I got wm6 rogers rom to work with my t-mobile dash
Thanks A Million Guy, Been Looking For This Fix
ayoraider07 said:
Go to Start > Settings > Connections > GPRS
Create 3 GPRS profiles named "T-Mobile MMS" "T-Mobile Data" & "T-Zones" with following settings:
Connects to: WAP network
Access point: wap.voicestream.com
User name: (blank)
password: (blank)
Authent type: None
Prim. DNS: 0.0.0.0
Secon. DNS: 0.0.0.0
IP address: (blank)
then go to > Connections > Proxy
create a proxy profile named "T-Zones Proxy" with following settings:
Connects from: WAP network
Connects to: the internet
proxy(nameort): 216.155.165.50:8080
type: http
blank for user name and password
Now go to Start > Messaging
Scroll to MMS, while MMS is selected press Menu > Settings > Menu > MMSC Settings
Delete anything in here, then create new profile "T-Mobile MMS" with following:
Name: T-Mobile MMS
MMSC URL: http://216.155.174.84/servlets/mms
wap gateway: 216.155.165.50
port: 8080
connect via: wap network
max sendin size: 300k
wap version: wap 2.0
That's how I got wm6 rogers rom to work with my t-mobile dash
Click to expand...
Click to collapse
Works like charm, perfect!
WOW thank you!
you're all very welcome.
going the other way
does anyone know how to go the other way on this? What I mean is that the saetting that you have given for the T-mobile MMS settings fit nicley into my phone, however, the settings that I got from rogers seem to be for a different service all together. Whats I have fro rogers is this
Rogers Media
Connect to : Internet
Access Point : Media.com
User : Media
Pass : Media
The problem is that the set up screen looks exactly like the one you guys are descrivbing in the T-mobile version and there is no where to actually put in this info...
hi!!! i got on my htc s621 the WM65_3VO.3.00.112509 ROM, everithing is allright but i can´t conect whith the internet by edge o gprs, in my operator they give me this configuration
connects to: the internet
access point : wap.clarochile.cl
user name: clarochile
password: clarochile
authentication type: none
primary DNS: 0.0.0.0
can somebody help me please......
hi frnds, i need gprs setting of Vodafone, m living in Punjab...
...
Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)
Access Point Settings:
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data
Bearer Settings:
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)
Access Point Settings:
Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9201
Data Bearer: Packet Data
Bearer Settings:
Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)
Rn
tell me in full details..
i can't understand where to fill these... thanks for reply...
..
start/settings/connections/connections/advanced/my isp/edit(do settings)/advanced(do ip address)/finish.
Hey all!
I just got a new email account from my university and they provided me some settings/server info but unfortunately i am unable to get my evo setup as exchange below is the info I have.. any suggestions on what info i need to input for
Exchange Server Name:
exchange domain name:
ser-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.2)
Outlook web application experience: Premium
User language: English (United States)
User time zone: (GMT-05:00) Eastern Time (US & Canada)
Exchange mailbox address: /o=ExchangeLabs/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Rood, Robery
Host address: https://bl2prd0103.outlook.com/owa
Version: 14.0.650.49
Host name: bl2prd0103.outlook.com
Exchange Client Access server name: BL2PRD0103CA006.prod.exchangelabs.com
Exchange Client Access server .NET Framework version: 2.0.50727.4927
Client Access server operating system version: Microsoft Windows NT 6.1.7600.0
Client Access server operating system language: en-US
Client Access server version: 14.0.650.0
Client Access server language: en-US
Client Access server time zone: (GMT) Monrovia, Reykjavik
Client Access server platform: 64bit
Mailbox server name: BL2PRD0103MB073.prod.exchangelabs.com
Mailbox server Microsoft Exchange version: 14.0.650.0
Other Microsoft Exchange server roles currently installed on the Client Access server:
Authentication type associated with this Outlook web application session:
Public logon: No
External POP setting:
Server name: pod51000.outlook.com
Port: 995
Encryption method: SSL
External IMAP setting:
Server name: pod51000.outlook.com
Port: 993
Encryption method: SSL
External SMTP setting:
Server name: pod51000.outlook.com
Port: 587
Encryption method: TLS
try using pod51000.outlook.com as your mail server
on your university computers, what domain do you usually sign into?
you may need to authenticate as DOMAIN\username along with adding that mail server