Dead spot comes and goes - Verizon Droid Incredible 2

I've been running different Chillybean ROM's for about a week now and I have a vertical dead spot right in the middle of the screen about 1/4 inch wide from top to bottom that comes and goes. Sometimes it works, sometimes it doesn't. Does that mean it's software or hardware related? Any idea for running some tests? Thanks all!

Related

To those with signal problems - try this please.

Hi all,
like some I've been having poor signal and not entirely sure if it's software or hardware. But I encountered something apple-esque earlier with my one x.
When holding the phone normally, i.e. resting in the palm of my hand with my finger and thumb round, I get around 1 bar, this rises a little outside.
When holding the phone from the speaker with my thumb and index finger, i get nearly full signal! Also by holding the edges at the base of the phone results in improved signal for me.
Can those who have issues try this out and see it it works? If not, I guess it must be my handset.
lol if this is just a death grip issue
twistedh said:
Hi all,
like some I've been having poor signal and not entirely sure if it's software or hardware. But I encountered something apple-esque earlier with my one x.
When holding the phone normally, i.e. resting in the palm of my hand with my finger and thumb round, I get around 1 bar, this rises a little outside.
When holding the phone from the speaker with my thumb and index finger, i get nearly full signal! Also by holding the edges at the base of the phone results in improved signal for me.
Can those who have issues try this out and see it it works? If not, I guess it must be my handset.
Click to expand...
Click to collapse
This happens with mine...its the lower left corner that you must avoid covering.
twistedh said:
Hi all,
like some I've been having poor signal and not entirely sure if it's software or hardware. But I encountered something apple-esque earlier with my one x.
When holding the phone normally, i.e. resting in the palm of my hand with my finger and thumb round, I get around 1 bar, this rises a little outside.
When holding the phone from the speaker with my thumb and index finger, i get nearly full signal! Also by holding the edges at the base of the phone results in improved signal for me.
Can those who have issues try this out and see it it works? If not, I guess it must be my handset.
Click to expand...
Click to collapse
well i have another problem when i try to call some one the signal drops to none and never go back !
i have to restart to get the signal back
i think it's a hardware problem.
can someone email htc with the problem ?
Now apple will sue HTC for copyright infringement on the signal bug. Sheesh...
Sent from my HTC One X using Tapatalk

yellow screen tint/spot FIX!

1) go to display settings and set sleep to never turn off and brightness to full
2) install 'dead pixel detect and fix' from market
3) open 'dead pixel detect and fix' select colors, custom then a nice bright yellow
4) once your screen is bright yellow put on charge and leave for the night
I'm unsure if this fixed my problem or just a coincidence that my screen got better over night anyway but I thought I would share to see if it helps anyone else.
djpoe said:
1) go to display settings and set sleep to never turn off and brightness to full
2) install 'dead pixel detect and fix' from market
3) open 'dead pixel detect and fix' select colors, custom then a nice bright yellow
4) once your screen is bright yellow put on charge and leave for the night
I'm unsure if this fixed my problem or just a coincidence that my screen got better over night anyway but I thought I would share to see if it helps anyone else.
Click to expand...
Click to collapse
This sort of trick helped me solve flickering but only temporarily.. I think yout problem will come back as well
Sent from my GT-N7000 using xda premium
It had been 2 days and is still good. I read up that a lot of one x's have the same problem, yellow smudges appears about 3 days after purchase but suppose to fade after about 2 weeks. So I don't think it will return this is just to speed things up a little.
I thought that it was due to hardware, but maybe not so much?
Well ill try to work on it for few days on full brightness, maybe it will reduce the glue grain, I noticed its on all one Xs they just vary in intensity
Sometimes pixels get stuck at a colour and flashing the area between different colours really fast can fix it.
Sent from my HTC One X using xda premium
Unfortunately my screen is yellow at the bottom and every pixel app I find has the menu bar there. What I did do though was leave chrome on the settings page and it did help to reduce it., however I've just been playing some fruit ninja. My phone got hot the touch screen stopped working correctly and the yellow is back worse than before
I am trying this now and will let it run overnight.
I currently have 2 yellow spots on the top of my screen. Hoping this will make them go away faster.
chris_lyon82 said:
Unfortunately my screen is yellow at the bottom and every pixel app I find has the menu bar there. What I did do though was leave chrome on the settings page and it did help to reduce it., however I've just been playing some fruit ninja. My phone got hot the touch screen stopped working correctly and the yellow is back worse than before
Click to expand...
Click to collapse
My yellow blobs was at the top of the screen, so the black menu bar at the bottom wasnt a concern for me. I am currently using tripndroids cm9 build that takes the black bar away and gives you full resolution use. Only attemp cm9 if your boot loader has allready been unlocked, so you can still replace your phone if things dont improve.
for anyone using cm9 they dont have the option to turn display sleep off completly, so i would recomend downloading an app callled 'screen on' that does the job from the market.
The yellow tint/spot isnt a hardware fault. It comes from poor manufacturing processing. If you squeeze hard on the edge of the screen for prolonged time, the yellow tint/spot appears. Once the pressure on the screen is normalized, the tint/spot will be gone. However, there is a chance that prolonged pressure will cause permanent damage, it is wise for you guys NOT to put your H1X into your jeans pocket!
Sent from my HTC One X using XDA
treebill said:
Sometimes pixels get stuck at a colour and flashing the area between different colours really fast can fix it.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
That can be achieved by just clicking fix on the dead pixel app, when i attempted this for about 2 hours i never saw any changes as after just trying a constant yellow i instantly saw that my screen got brighter, whiter and the yellow smudges on top of my screen started to fade. I compare to my partners one x to check for improvements.
Any luck?
Sent from my HTC One X using XDA
I do hope that this solution help you with that problem.. however there must be a reason why HTC help support keeping my HOX at their location , as far as I know they waiting for new battery as well as NEW LCD..according to that information must be smth wrong with LCD... (yellow dots of course)
So I need to switched back to my HP pre 3 for a while..
Hi i have the same problem with my HOX, my HOX is perfect except for the blue spot when i turn my screen brightness to full and use a black wallpaper you can see the blue spot, i dont know what i must to do because it is my second HOX and it took me 2 weeks to get a replacement unit from virgin if any body in here has experience with htc australia service centre please let me know thanks (i did try to use the app but no luck)
Sent from my HTC One X using Tapatalk 2
Alright -
I let it run for like 12 hours last night.
My yellow spots are about 75 percent gone!!!!
I am going to let it run again tonight and will give another update.
For those of you will yellow spots I would suggest giving this a shot. So far it seems to be working for me. Although I will keep an eye on it to see if it comes back or gets worse again.
Thanks!
any idea if this deals with the glue grain too?
I don't think the color really matters - what metters is that it is left alone AND getting warm.
I guess if you put a book on top of it while running a 3D game, 90% of the spots will be gone momentarily, but as soon as you start using it they will creep back because it is a lamination problem and not a screen problem...
And for those who claim their spots "disappeared" after a week - yes, they did disappear for me one day, but were back once I started using it heavily.
the spots problem will not appear for those who have a flawlessly fit screen
this is why i advice those with lamination issues to get rid of the phone, lamination issues = spots, uneven whites and chance of dust get in
Does anyone have any further evidence that this works? I've got a very light yellow haze/spot in the bottom right hand corner of my screen which I'm not too happy about.
Hoping that it does work because I don't really want to go through the hassle of acquiring a replacement. I will do if the problem is terminal though.
Thanks.
I don't have the yellow spots. But the top part of my screen has a yellow tint. This is my second phone and its perfect apart from this. Only had it a couple of days though so I'll give it time to see if it will fade.
I can only do a swap once more and I don't want to end up with a worse phone and have to send it away for repair.
Dilemma!
Sent from my HTC One X using XDA

[Q] Is my Incredible 2 overheating?

Hello all,
I purchased a used Verizon HTC Incredible 2. I've been playing around with the phone and everything seems to be functioning, but after 10-15 minutes of use (basically when the screen it on while I'm playing games) I noticed that the lower portion of the phone seemed to feel a lot hotter than the rest of the phone. There is definitely a difference in temperature between the upper half and the bottom half of the phone.
As I said before everything is functioning as it should, but there is a little quirk that I noticed. On the bottom of the phone there are 4 shortcuts (home, menu, etc.) When I have it in the vertical position I can see a faint image of what the icon should look like when I go into the horizontal position. I've included a picture (the best I can do) to illustrate what I am talking about. My assumption is that this is the cause of the 'overheating' because both lights are on. Maybe it this isn't even the cause of my so call problem. I'm just afraid that this issue may cause issues in the future.
Edit - So I can't seem to post links...
Downloaded OS Monitor, this app is telling me that my battery temperature is 38.1* C or 100.58* F
I have noticed this on mine for the first time yesterday. Extreme heat on the bottom right side of the phone. Everything works ok except yesterday I also updated my PRL and it changed. Ever since I have been having LOTS of jumps to 1x data where I always have 3g. Not sure if the problems are related.
Our phones can tolerate up to 115F then the notification led will blink orange and green.
It is normal for the phone to produce more heat when put under stress.
ie: games
Sent from my Incredible 2 using xda premium
This phone is like an ice cube compared to the Rezound, lol.

Ghost touches

Anyone else getting the ghost touch problem?
I couldn't work out what was causing this on my phone so I enabled show touches in the development menu and it shows.
It goes from 2 to 3 spots on the left hand side of the screen.
It's not a major problem but happens at least 3 times a day and won't snap out of it unless I put the phone back into sleep a couple of times.
Do you think maybe scratches on the screen cause this?
TIA
Is your phone connected to a charger when this occurs? It might be it, since im experiencing the same thing since htc desire hd.
miHah said:
Is your phone connected to a charger when this occurs? It might be it, since im experiencing the same thing since htc desire hd.
Click to expand...
Click to collapse
No. Can happen at anytime. Quite random.
It takes a few on and offs with the sleep button to stop it.
Can't get off the lock screen until it goes away because I can't move the unlock slider.
Very annoying.
I had the same problem - the first day i got my hox. With and without the charger (with charger a litte bit more often i think).
I pushed the complete left side of the screen (top) carefully and now it works well. No more ghost touches ^^.
\/\/iLLow said:
I had the same problem - the first day i got my hox. With and without the charger (with charger a litte bit more often i think).
I pushed the complete left side of the screen (top) carefully and now it works well. No more ghost touches ^^.
Click to expand...
Click to collapse
Ok. Once I pushed around the screen edges, the left side has some play and moves maybe a mm with a slight creak.
I push it in but still that little bit of play on the left side.
It's quite impossible to show the service centre the problem because its so random but now I can show them this.
Cheers.
I hope you'll get a new "perfect" hox and i'll not have the same problem later :fingers-crossed:

Galaxy tab s 8.4 t-700 lcd screen issues

Hi, maybe someone have encouter similar issue and have and could comfirm if there could be anything else i could do except replacing whole lcd+touch, which cost pretty much same as new unit
My my screen is showing some weird artefacts on screen, at first there is not much but its getting worse after few muniutes of use. If i lock and unlock the device i show white light bleed on left side of the screen (first picture) then if i lock again, wait for a while it disappears, but some artefacts and color pixel start to show on left side (second pic). After a while some strong white lines apear, always in the some spot, but if i put down the device for few minutes it desappers. Reattaching battery didn't help, i guess thats not the case. Could this be a faulty LCD connector? Or the screen is dying.. ? Definitly not a software bug, i just upgraded to 6.0 and even in bootloader mode while upgrading there were those two lines (last pic)
What screen brightNess do you use. It's recommended to use 20% to avoid screen burn in
dksohum7 said:
What screen brightNess do you use. It's recommended to use 20% to avoid screen burn in
Click to expand...
Click to collapse
Hmm.. since i usually use the tablet in bright locations its probably set to higher then 50%, at least..
There is one more thing, after like 10 minutes of use, almost all the above issues stops, only thing that stays is the "burned like" vertical stripes, barely visible, on about 2/3 of the screen.
I does not make the table unusable but its quite annoying...
could this be affect of screen burn in ?
i think its just a bad screen from a begining cuz i have tab s 8.4 for almost 2 years now and i gave it to my brother for a year and he was in Tenerife...temperatures there are high so i doubt its a screen burn since my tablet is still ok even after one year at Tenerife with probably brightnes always on 100%...just sharing my xperiance cheers guys

Categories

Resources