After i push tacoroot when i try and use the line adb shell /data/local/tacoroot.sh --setup its suppose to put the phone into recovery but nothing happens and if i try to use the recovery command within this it also does nothing. only adb reboot actually reboots it but i need the other commands to work. any suggestions? I'm using the guide written by dets34 under development.
I'm on twrp 2.3.6.1 and can't flash any 4.3 ROM. Any fix? And twrp says no open recovery script for your device. I'm on a rooted stock 4.0.4
Sent from my SGH-M919 using xda premium
U need a newer twrp 2.6.1.0 would a be a good version to use. 2.6.3.0 has a few bugs
Sent from my SGH-T989 using Tapatalk
Ahh thank you
Sent from my SGH-M919 using xda premium
Is there a way to update via goo manager app? I tried to update by doing menu>install open recovery script. But it doesn't recognize my device. Anything I could do? I don't have an Android to USB cable handy.
Sent from my SGH-M919 using xda premium
'Murica said:
Is there a way to update via goo manager app? I tried to update by doing menu>install open recovery script. But it doesn't recognize my device. Anything I could do? I don't have an Android to USB cable handy.
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
You can update by grabbing the recovery IMG file from their site and use android terminal emulator to install it!
su
dd if=/sdcard/openrecovery-twrp-hercules-2.1.8.img of=/dev/block/mmcblk0p22 <- (this is for Hercules obviously)
And the "openrecovery..." Is the one you downloaded and place it in the root of sdcard make sure it's word for word and you should be good to go!
PhlexPlexico said:
You can update by grabbing the recovery IMG file from their site and use android terminal emulator to install it!
su
dd if=/sdcard/openrecovery-twrp-hercules-2.1.8.img of=/dev/block/mmcblk0p22 <- (this is for Hercules obviously)
And the "openrecovery..." Is the one you downloaded and place it in the root of sdcard make sure it's word for word and you should be good to go!
Click to expand...
Click to collapse
So I type 'SU' and hit enter. Than I copy and paste ' dd if=/sdcard/openrecovery-twrp-hercules-2.1.8.img of=/dev/block/mmcblk0p22' replacing ' openrecovery-twrp-hercules-2.1.8.img' with the name of my recovery and then replacing ' mmcblk0p22' with 'Hercules' and hitting enter?
Sent from my SGH-M919 using xda premium
'Murica said:
So I type 'SU' and hit enter. Than I copy and paste ' dd if=/sdcard/openrecovery-twrp-hercules-2.1.8.img of=/dev/block/mmcblk0p22' replacing 'openrecovery-twrp-hercules-2.1.8.img' with the name of my recovery and then replacing ' mmcblk0p22' with 'Hercules' and hitting enter?
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
No not quite, if you're using the phone that's appropriate for the forum you just copy and paste
Code:
su
dd if=/sdcard/openrecovery-twrp-hercules-2.1.8.img of=/dev/block/mmcblk0p22
And openrecovery-twrp-hercules-2.1.8.IMG with whatever your name of the IMG file is, so if it's openrecovery-twrp-hercules-2.6.1.0.img then that would replace it. The block mmcblk0p22 does not get changed or else your device will brick!
So to clarify:
The
Code:
dd if=/sdcard/openrecovery-twrp-hercules-2.1.8.img
is the path to where the img file for TWRP is. If you're downloading 2.6.1.0, and move the img file to the root of your SDcard, then it might be something like
Code:
dd if=/sdcard/openrecovery-twrp-2.6.1.img
Now the
Code:
of=/dev/block/mmcblk0p22
is where the img is going to be written to. From what I see, the last bit
Code:
mmcblk0p22
varies on the device and where the recovery installs. It's a different location for the Galaxy S4 compared to the T989 (also known as hercules).
Say if you were to rename the download to something easy to type out, like just recovery.img and placed in the root of the sdcard, then it would look like
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
Then you should be able to boot into recovery and it should be updated!
If something goes wrong, your device will brick, so make sure you download the right file. I flashed the .tar by accident on a friends phone, but Odin can easily fix it by flashing it with that.
Sorry for the short responses, I was on my phone when I was replying!
My kf2 was working fine but I ran out of room to install apps. I deleted unneeded apps still not enough room. I booted into twrp did a full wipe and now I can't side-load any roms to install. Twrp shows no OS installed. It will boot into twrp fine but nothing else. I have a fastboot cable. My computer recognizes my kf2 as an adb device but I can't seen to get anything to load. Some of the commands in KFFAID work but not all. I am trying to load cm11 and kitkat back. Any help would be appreciated.
James
getnby said:
My kf2 was working fine but I ran out of room to install apps. I deleted unneeded apps still not enough room. I booted into twrp did a full wipe and now I can't side-load any roms to install. Twrp shows no OS installed. It will boot into twrp fine but nothing else. I have a fastboot cable. My computer recognizes my kf2 as an adb device but I can't seen to get anything to load. Some of the commands in KFFAID work but not all. I am trying to load cm11 and kitkat back. Any help would be appreciated.
James
Click to expand...
Click to collapse
if sideload doesnt work then just do this, put the rom you want to flash and its gapps in the folder that adb is in, and run this while booted into twrp: adb push romnamegoeshere /sdcard/
then you can install the rom from inside twrp
didn't work
stunts513 said:
if sideload doesnt work then just do this, put the rom you want to flash and its gapps in the folder that adb is in, and run this while booted into twrp: adb push romnamegoeshere /sdcard/
then you can install the rom from inside twrp
Click to expand...
Click to collapse
Here is what happened. It said the device was not found. In the device manager it shows adb device under kindle fire.
Look on your task manager and kill every instance of adb.exe that you see and try again, I had that happen before when multiple instances were running. As long as it is in twrp then adb should work. If it continues to not work then uninstall the adb driver and if you see the MTP kindle device still there remove it as well, there might be a composite device that needs removing too, I find it a pita going between fastboot, recovery and whatever ROM os flashed if I use windows because of this, the drivers constantly have to be reinstalled when you change modes for me, hence why I avoid working with my kindle in windows and instead just use Linux. If you see any USB composite devices, check the hardware id's for a vid of 1949, if it has that then feel free to uninstall it. This may sound a bit complex, if you need more of an explanation just tell me.
Sent from my Amazon Kindle Fire HD using Tapatalk
No luck
stunts513 said:
Look on your task manager and kill every instance of adb.exe that you see and try again, I had that happen before when multiple instances were running. As long as it is in twrp then adb should work. If it continues to not work then uninstall the adb driver and if you see the MTP kindle device still there remove it as well, there might be a composite device that needs removing too, I find it a pita going between fastboot, recovery and whatever ROM os flashed if I use windows because of this, the drivers constantly have to be reinstalled when you change modes for me, hence why I avoid working with my kindle in windows and instead just use Linux. If you see any USB composite devices, check the hardware id's for a vid of 1949, if it has that then feel free to uninstall it. This may sound a bit complex, if you need more of an explanation just tell me.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
My computer only recognizes the kindle as an adb device in fastboot mode. I haven't been able to use any of the adb commands on it with any luck. It says device not found. This only shows in kffaid version 4.1.87-beta.
*facepalm* you don't use adb commands with fastboot, you use fastboot commands with fastboot. When it is in twrp it should have adb access though...
Sent from my Amazon Kindle Fire HD using Tapatalk
I think I have a driver issue. I forgot to thank you for your help. If I could send the zip rom and gapps I could get it back to where it was. Is there anyway to start all over from the original kindle OS at this point?
Thanks you
You coukd restore it in fastboot using kffa but it seems like unnecessary work. I would boot a ubuntu 13.10 live cd/usb and just attempt it from there since there won't be any driver issues.
Sent from my LG-P769 using Tapatalk
I tried Ubuntu 12.04 LTS and it was to much trouble. I will try Ubuntu 13.10. I will have to learn the commands to use it.
Thanks
getnby said:
I tried Ubuntu 12.04 LTS and it was to much trouble. I will try Ubuntu 13.10. I will have to learn the commands to use it.
Thanks
Click to expand...
Click to collapse
these commands should do the trick assuming the repos are all active in the downloadable section of the software updates control panel.
Code:
sudo apt-get update
sudo apt-get install android-tools-fastboot
and after that the fastboot command will work but keep in mind to give it superuser privis with sudo or it probably wont work, i had forgotten that recently on my own pc since i don't deal with fastboot too often. ex: sudo fastboot -i 0x1949 getvar product
I had to work all weekend. I tried to get access through ubuntu 13.10. I used the commands you provided (sudo apt-get update). This command worked fine. When I used this command (sudo apt-get install android-tools-fastboot) It said I had to enable universe. I did some research and got that working and tried to use this command again (sudo apt-get install android-tools-fastboot) then this one worked fine. Then I tried the last command with my kindle in fastboot mode flashing green light (sudo fastboot -i 0x1949 getvar product ). The message was cannot connect to otter-2 ... device. Same thing I have been getting all along.
I think when I wiped the system I cleared all the software to connect to any external device. I don't know if I can even get access to restore the original OS. If you haven't guessed by now I an a noob. I think you realized that with my adb commands with fastboot enabled. I got the impression you knew when I saw the *facepalm* comment the the beginning of you post. When my kindle is booted to twrp my computer does not recognize it. My computer will recognize as an adb device when in fastboot mode. My computer will recognize it as a kindle (with a yellow triangle in the device manager) when it is trying to boot with the white and blue logo. I don't know what to do at this point. Here is a screen shot with adb side load from twrp.
Interesting, seems that data didn't want to mount. Have you tried adb from Linux while in twrp? Just run "sudo apt-get install android-tools-adb" to install the command, if you can get adb access at least then I may be able to help fix this depending on what exactly is wrong. BTW I didn't exactly think you were a noon with that facepalm, I just see people get that misconception a lot about adb and fastboot commands. What exactly did that fastboot command report back, I was surprised it was an error when I saw otter2 in the error considering that was what that command was sort of supposed to report back.
Sent from my Amazon Kindle Fire HD using Tapatalk
Here is where I am. See below. Now where do I put the file in ubuntu so I can access it from the terminal window. I am running ubuntu from a live CD. I tried the push command but it says no such file or directory. I told you I was a noob!
[email protected]:~$ adb devices
List of devices attached
0123456789ABCDEF recovery
Since adb is in a system path must out it in the current directory you are CD'd into, if you left the terminal alone it should be in ~ (the home folder of the Ubuntu account) so photo the home folder and drop it in there and run "adb push filename /sdcard/"
Considering that /data doesn't want to mount and that /sdcard os technically in /data, that command might not work depending on what's going on. I reccomend seeing if you can first and if not goto the months and mount /cache if its not mounted already, and they pushing a twrp update into it to try to reflash twrp, its small enough I think it should fit into the cache, though I don't think a ROM would fit.
Sent from my Amazon Kindle Fire HD using Tapatalk
I installed ubuntu on my laptop with windows 7. It seems to work better. I put the files in the home folder and the user folder. I mounted the cache and ubuntu said instead of unable to mount it was unable to access kindle now. Here is the terminal window results.
[email protected]:~$ sudo apt-get install android-tools-adb
[sudo] password for user:
Reading package lists... Done
Building dependency tree
Reading state information... Done
android-tools-adb is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
[email protected]:~$ adb push cm-10.2-20130908-UNOFFICAL-otter2.zip /sdcard/
cannot stat 'cm-10.2-20130908-UNOFFICAL-otter2.zip': No such file or directory
[email protected]:~$
Um OK well the filenames are case sensitive in Linux so lookout for that. Also if it was in your home folder then it should have worked as long as you didn't CD anywhere else in the terminal first.
Sent from my Amazon Kindle Fire HD using Tapatalk
Problem Fixed
I fixed my problem. I had to restart my kindle into recovery mode and connect the fastboot cable to the computer and kindle before it booted into TWRP. At that point while booted into TWRP I used the push command in ebuntu terminal to sideload cm11 and gapps. After I loaded them I installed them with TWRP and rebooted. Now it is restored to where it was when I wiped it. I will not do the advanced wipe again.
adb push cm-11-20140202-NIGHTLY-otter2.zip /sdcard/
adb push gapps-kk-20131119.zip /sdcard/
Thanks for your help stunts513
Click to expand...
Click to collapse
Whenever I try to flash TWRP to my phone it says "error: more than one device or emulator". Can someone help?
tyboxer13 said:
Whenever I try to flash TWRP to my phone it says "error: more than one device or emulator". Can someone help?
Click to expand...
Click to collapse
I'd guess it is some problem with the adb server. Close all cmd and open a new one. Navigate to your adb/fastboot folder and enter the following:
adb kill-server
adb start-server
adb usb
adb devices
If it starts up again and all is fine it should show your device after the last command.
Btw. why is everybody using an all in one toolkit instead of learning to work with adb fastboot properly and doing it the old fashioned way: reading all that's needed to know and start off step by step.
Sent from my HTC One_M8 using XDA Free mobile app
OK, I had my kindle running cyanogenmod 11. I was having problems with some apps running on it, root was acting weird. Root checkers said it was rooted, but some apps that required root weren't installing right.
Fast forward, I thought perhaps I needed to flash the new version. I got into recovery to run it and flash it and this is the error I have.
So all the forums said, just wipe it then it will work. Of course now I have no OS on the thing. TWRP is fine, but I can't use the tablet.
So some other forums suggested it's either a mounting to E:\ problem or a rooting problems. I can get in to ADB, I've pushed many different roms over and they all have similar errors.
All of the Root tools I can find require you to come in the front door. TWRP fails when it goes to 'fix permission' and every time I reboot says , 'root is gone, swipe to fix' but it's not seeming to stick.
Any ideas on how to make sure I can mount the new rom and get this back up and running.
As I said, I've tried many roms, directly downloaded from CM website: Download:
cm-12.1-20160129-NIGHTLY-d2tmo.zip (284.96 MB)
sha1: e461a1dc263d927de3b6748d3b877310e7b1fd39
Download: cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2tmo.zip (286.1 MB)
sha1: bfb989917775ff190b8b795d93c1e439ccf8a514
I'm running TWRP 2.6.0.0 and have a binary ADB driver of 1.0.31. I can ping 4.2.2.2 so I'm pretty sure since the issue is coming from the device itself, and the way it's erroring reminds me of other permission problems I've seen in other devices that it's a root issue.
Is there a simple command line ADB tool or something that I can use to validate/set root?
Thanks!
kyleyarbrough said:
OK, I had my kindle running cyanogenmod 11. I was having problems with some apps running on it, root was acting weird. Root checkers said it was rooted, but some apps that required root weren't installing right.
Fast forward, I thought perhaps I needed to flash the new version. I got into recovery to run it and flash it and this is the error I have.
So all the forums said, just wipe it then it will work. Of course now I have no OS on the thing. TWRP is fine, but I can't use the tablet.
So some other forums suggested it's either a mounting to E:\ problem or a rooting problems. I can get in to ADB, I've pushed many different roms over and they all have similar errors.
All of the Root tools I can find require you to come in the front door. TWRP fails when it goes to 'fix permission' and every time I reboot says , 'root is gone, swipe to fix' but it's not seeming to stick.
Any ideas on how to make sure I can mount the new rom and get this back up and running.
As I said, I've tried many roms, directly downloaded from CM website: Download:
cm-12.1-20160129-NIGHTLY-d2tmo.zip (284.96 MB)
sha1: e461a1dc263d927de3b6748d3b877310e7b1fd39
Download: cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2tmo.zip (286.1 MB)
sha1: bfb989917775ff190b8b795d93c1e439ccf8a514
I'm running TWRP 2.6.0.0 and have a binary ADB driver of 1.0.31. I can ping 4.2.2.2 so I'm pretty sure since the issue is coming from the device itself, and the way it's erroring reminds me of other permission problems I've seen in other devices that it's a root issue.
Is there a simple command line ADB tool or something that I can use to validate/set root?
Thanks!
Click to expand...
Click to collapse
Your TWRP version is out of date. Flash the 2.8.7.0 image from this thread, reboot into TWRP and make sure your TWRP version is now 2.8.7.0, and try flashing CM12.1 after that.
Sent from my Amazon Jem using XDA Labs
monster1612 said:
Your TWRP version is out of date. Flash the 2.8.7.0 image from this thread, reboot into TWRP and make sure your TWRP version is now 2.8.7.0, and try flashing CM12.1 after that.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
HI! thanks for that advice. I wish I could. I've tried several methods, and although I can get into ADB shell, I can't access su:
besides kindle fire first aide and other batch files, I found some manual instructions:
http://forum.xda-developers.com/showthread.php?t=2277105
Here's what it tells me to do (among many other things): I realize this is just backing up stuff that doesn't exist etc, but it's indicative of the problems without having su.
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/boot of=/sdcard/stock-boot.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/recovery of=/sdcard/stock-recovery.img"
adb shell su -c "dd if=/dev/block/platform/omap/omap_hsmmc.1/by-name/system of=/sdcard/stock-system.img"
mkdir C:\KFHD8Backup
adb pull /sdcard/stock-boot.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-recovery.img/ [C:\KFHD8Backup]
adb pull /sdcard/stock-system.img/ [C:\KFHD8Backup]
but if I go into adb shell and type any commands, like just simple su:
I get /sbin/sh: su: not found
when I do whoami: I get root
but I get a funky prompt:
~#^[[61;5R
instead of a normal # root prompt.
So I'm kind of stuck because I can't really do anything without the su, and it says I'm root. So can I adb push over the files and mount the right drives or whatever to get it to recognize su. At that point I can install twrp, but i'm sure at that point my existing twrp will work too!
I can't seem to get it into fastboot mode either. When I adb devices it says I'm in recovery, not device and in TWRP it says no OS installed. So my only functioning loader is TWRP. (or however you put that more accurately).
I feel like with adb push working, I should be able to do something to get this back, but all the tools expect you to just push a button, not do it the hard way.
So long story short, if you can point me to a thread that tells me how to update TWRP or how to push SU over with ADB or anything that would be awesome. I"m not a complete turd at this, but I think I broke it using something like kingoroot instead of just using the bin4ry while I still had the cyanogenmod working somewhat. So I'm thinking that's why i got the funky prompt, and that's why my su is gone from where it should be.