Huh. Just noticed the international version of the Optimus G is now officially supported by CM (via nightly builds):
get.cm/?device=e975
Does this mean we may be seeing the unofficial E971/E973 moving more toward the official side?
Edit: typos and grammar.
Sent through the magic of an LG Optimus G (E971) running RootBox 4.2.2.
Ive already tried the nigtly build, unlike the chad's version, official one doesnt work lol
To be honest it works, but screen showing nothing.
Is the CM team and chad working together? Or are these 2 completely different builds?
Tim4 said:
Ive already tried the nigtly build, unlike the chad's version, official one doesnt work lol
To be honest it works, but screen showing nothing.
Click to expand...
Click to collapse
What do you mean by that?
Gesendet von meinem GT-I9000 mit Tapatalk 2
haasgo said:
What do you mean by that?
Gesendet von meinem GT-I9000 mit Tapatalk 2
Click to expand...
Click to collapse
chad's version:
http://forum.xda-developers.com/showthread.php?t=2229806
It's very stable and nearly completely full-featured apart from phone, notification LED and some modem issues. I'm running it as my daily driver.
As for what Tim is saying, I'm assuming he wants to say that the official version is less complete than chad's version...
I mean on the nightly one, all i can see is nothing but just black screen.
I just found that tread on Google because I was looking for a working CWM for the E975. Does anybody has experience with that CWM?
http://donandroid.com/how-to-install-cm-10-1-on-lg-optimus-g-e975-1016
Edit: It works .
How's the battery life compared to stock rom?
i do not flash this rom dated April 14 by TWRP, why that?
Folowing Ricardo's post on Google + announcing the official CM10.1 for E975, I said give it a try.
I had installed the ClockworkMod from the Play Store (the premium version), I flashed the CWM touch recovery for E975 (in app payment), booted in recovery and installed the official CM10.1 zip.
Rebooted and... bootloop!
The Cyanogenmod logo was spinning but it would not start.
So I got my first softbrick with E975.
I had to reflash the official kzd, reroot, unlock bootloader.
For now I will stay with the official 4.1.2 stock ROM.
I hope that CM10.1 will work with the TWRP and then I'll give it a try.
Just use FreeGee to unlock, reboot and flash. Works everytime
Sent from my LG-E975 w. CM10.1 using xda premium
goodmamba said:
Folowing Ricardo's post on Google + announcing the official CM10.1 for E975, I said give it a try.
I had installed the ClockworkMod from the Play Store (the premium version), I flashed the CWM touch recovery for E975 (in app payment), booted in recovery and installed the official CM10.1 zip.
Rebooted and... bootloop!
The Cyanogenmod logo was spinning but it would not start.
So I got my first softbrick with E975.
I had to reflash the official kzd, reroot, unlock bootloader.
For now I will stay with the official 4.1.2 stock ROM.
I hope that CM10.1 will work with the TWRP and then I'll give it a try.
Click to expand...
Click to collapse
Did you do a factory reset from recovery? This step is very important otherwise you end with a bootloop. So you just had to reboot in recovery and wipe data or do factory reset and reboot.
The ROM is working 100%. Fully working 13 megapixel camera and very smooth.
The easiest way is:
Use FreeGee from Play Store and free your device (void your warranty)
Download RomManger from Play store and flash CWM recovery. Not TWRP !!!
Put the ROM on your Internal storage Download here: http://get.cm/?device=e975
Put Gapps for jb 4.2.2 (20120301) on internal storage Download here: http://goo.im/gapps
Reboot to recovery (Keep Volume up while rebooting and press the Volume down rocker two times and press Power button)
Select option “install zip from sdcard”
Then select “choose zip from sdcard”
Flash CM10.1 rom.
Flash Gapps package.
Go back to main screen in recovery
Important step !!! - Select FACTORY RESET in Recovery and press Power button - !!!
Reboot into system
Enjoy CM 10.1 on your LG OG E975
goodmamba said:
Folowing Ricardo's post on Google + announcing the official CM10.1 for E975, I said give it a try.
I had installed the ClockworkMod from the Play Store (the premium version), I flashed the CWM touch recovery for E975 (in app payment), booted in recovery and installed the official CM10.1 zip.
Rebooted and... bootloop!
The Cyanogenmod logo was spinning but it would not start.
So I got my first softbrick with E975.
I had to reflash the official kzd, reroot, unlock bootloader.
For now I will stay with the official 4.1.2 stock ROM.
I hope that CM10.1 will work with the TWRP and then I'll give it a try.
Click to expand...
Click to collapse
there shouldn't be a reason why CM10.1 from Ricardo won't work with TWRP, u should flash it, and gapps then reboot ur phone, ofc clear cache, dalvik cache and that
puma99dk| said:
there shouldn't be a reason why CM10.1 from Ricardo won't work with TWRP, u should flash it, and gapps then reboot ur phone, ofc clear cache, dalvik cache and that
Click to expand...
Click to collapse
I tried myself and it didn't work with TWRP. Wrong device id E975...
Best to read his Google+ Blog. So I found out myself.
After flashing CWM the ROM flashed fine. The ROM works fine. And I have 13 megapixel camera with focus.
Just delete the phone checking from update script
Are there any issues if you dirty flash from an unofficial 10.1 build to the official 10.1 nightly?
Yeah, it stucks at boot logo. For me at least.
Never dirth flash from another rom.
Thats a NO GO
Sent from your moms bed!
There is no reason for dirty flash anyway as you get all settings back from Google right after install? And if you make backups of your data omce in a while you loose nothing.
You should know, that old settings can screw with a new flash aswell. Then you will need to clear the old data from some apps ( like youtube ).
Thats why a total clean flash without saved data ( from google ) is the best
Then its also easier for a dev to find the right bugs, if there are some
Hey guys=)
So yesterday i installed (after an EFS Backup) a 4.3 Custom Rom (JoelDroid) on my Galaxy NOte 2 N7100. It was on a rooted 4.1.2.
The rom booted everythign looked fine. I also wiped Data/factory resetted my device before i install the rom. But when i have to configure it the first time, it always crashed. So i made a full wipe and flashed the rom again (Philz touch btw the newst version). But the same thing again.
So i decided to flash a new ROM. Full reset, resetted caches and so on and the same problem again. My device boots up correctly but after 1minute or so it freezes completly. Cant press any buttons and so on.
The last try for me was to install a CM 10.2 (Asylum) version. This one is working properly. Had 1 or 2 crashes, but now its working fine.
But i dont want to lose the stock features.
Can anybody help me pls? What did i wrong? what do i have to do to get a proper functional MI6 4.3 rom on my N7100?
Thank you very much
Greets Marco
Have tried any other 4.3 rom? Steps u are following are absolutely correct btw..
If u using philz then u should choose the option "clean install befire a new rom" and manually format system,data,cahe and preload..this is a clean install.
Sent from my AweSoMe ?♥Note2♥?
Thanks for your reply!
Yes i used the option clean for New installation and i used 2 other 4.3 Roms too AS i mentioned. But at least i know now that my procedure was correct. Should i try another Rom? Or should i flash back to stock 4.2.2 (if its possible) via Odin?
Sent from my GT-N7100 using xda app-developers app
ok it looks like that the Asylum CM 10.2 is also not working. Crashes after some time too (every 1-2 hours) :/ really need help guys!
EDIT:
Ok i installed Stock 4.1.2 ROM via ODIN and now everything's working fine again. I think i will stick to this for some time now (have a prerooted version so root still there)
Hi,
In my current baseband I am not able to get data services though I am getting data active symbol on signal bar. I am trying to flash different modes to get it working . here the problem is when I flash modem zip in recovery,it shows flash is successful.but when i reboot the phone, I could still see the old modem only. Tried cwm/twrp/ madmack's hacked recovery but same result.
Could you please help?
Is there any alternative way to flash recovery?
How can I restore my old ROM setup including baseband? As I tried to restore a backup with fully functional modem in it, restore is successful but modem is not the one that was backed up.
Sent from my LG-E980 using xda app-developers app
vnsriniwas said:
Hi,
In my current baseband I am not able to get data services though I am getting data active symbol on signal bar. I am trying to flash different modes to get it working . here the problem is when I flash modem zip in recovery,it shows flash is successful.but when i reboot the phone, I could still see the old modem only. Tried cwm/twrp/ madmack's hacked recovery but same result.
Could you please help?
Is there any alternative way to flash recovery?
How can I restore my old ROM setup including baseband? As I tried to restore a backup with fully functional modem in it, restore is successful but modem is not the one that was backed up.
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Hi, have you found a solution to this? I appear to be in the same boat.
I flashed this one without a problem
http://forum.xda-developers.com/showthread.php?t=2568336
I don't if it's related but first I installed stock kdz and afterwards cm10.2 and then the modem.
olorin said:
I flashed this one without a problem
http://forum.xda-developers.com/showthread.php?t=2568336
I don't if it's related but first I installed stock kdz and afterwards cm10.2 and then the modem.
Click to expand...
Click to collapse
Hi, That link you sent was for the E986. It's not going to mess up my E988? Also, will this work with North American networks?
Hello guys I just wanna inform you that there is something happening with the CM 11 4.4+ based ROMS
they deleted my Baseband and IMEI
I restored through KIES and got my Baseband and IMEI back but this thing keeps happening and I cannot figure out why?
It's painful procedure because I did this more then 10 times
First I had to Reflash everything through KIES which makes my phone as DEFAULT
then I had to ROOT and install the ROOTED Original 4.3 then I had to install Clockwork Mod with MOBILE ODIN in order for me to install different ROMS
after that I do FULL WIPE ALWAYS
Cache / Dalvik / Data / System even Internal Storage
I installed CM11 whatever ROM u choose:
http://forum.xda-developers.com/showthread.php?t=2453586 (tried this one no success)
Tried this one:
http://forum.xda-developers.com/showthread.php?t=2565259 again the same thing Bad baseband
Also this one:
http://forum.xda-developers.com/showthread.php?t=2493905 OMNI Rom (first installed older version everything was fine but when It updated to the latest OMNI I got the same Unknown Baseband and no DATA whatsoever)
so what the heck is going on? Please help me?
recovery might be the issue
I just had this problem yesterday. You wouldn't happen to be using TWRP recovery would you? I found that if I was using TWRP and Kit Kat AOKP I would have no service and my APN list would be empty. If I used Philz Custom recovery or CWM it would work fine.
I tried going downloading the newest 2.6.3.1 version of TWRP and it made my phone unable to boot. I had to flash another recovery via Odin in order to get back into my phone.
Just a thought.
I've had this issue as well and for some reason the latest nightlies don't play nice with my phone and recovery I'm using the latest official twrp for t0lte. Not t0ltetmo. I recently tried fishing the last multi window and I lost my microphone use. I have since reverted to a homemade build from January.. It seems to be the only thing that works.
Sent from my SGH-T889
Guys I used both CWM and TWRP both the latest versions... and this thing happen during both tries... I don't think it's the Recovery!
Hi,
Today i tried to flash Rin 1.7 Kernel for D855 and it was almost successful. After reboot, i notice that my network blink every second Oo.
I do some research and i found that my baseband is missing (unknown), my IMEI is still here. So i restore an old backup (stock ROM) and it didn't solve the problem. Then i return to recovery and retore the EFS onl and it was a fail.
I can't make any call since 3 hours. How i do to restore or flash my baseband ?
Firmware (V10L-EUR-XXX)
Thnk you
Biou_Pilgrim said:
Hi,
Today i tried to flash Rin 1.7 Kernel for D855 and it was almost successful. After reboot, i notice that my network blink every second Oo.
I do some research and i found that my baseband is missing (unknown), my IMEI is still here. So i restore an old backup (stock ROM) and it didn't solve the problem. Then i return to recovery and retore the EFS onl and it was a fail.
I can't make any call since 3 hours. How i do to restore or flash my baseband ?
Firmware (V10L-EUR-XXX)
Thnk you
Click to expand...
Click to collapse
Baseband is ok. Just restore a nandroid or flash a custom rom or what ever. And you will be ok.
tissot said:
Baseband is ok. Just restore a nandroid or flash a custom rom or what ever. And you will be ok.
Click to expand...
Click to collapse
Thank for your reply.
I did, i flashed my stock backup - Didn't work
I flash a fresh stock based Rom - Didn't work
I flash Carbon Rom - Didn't work (However, i can use the mobile network but the base still not showing up in settings...)
I don't know what to do now
Problem solved !
here the solution : http://forum.xda-developers.com/lg-g3/development/rom-lollipop-rooted-rom-skin1980-t2936022
hi
how did you solved which modem you used i get baseband unknown and imei null