Related
So I'm currently running Cyanogenmod version 10.2.0 .. Android 4.3.1.
I've updated to the newest version of TWRP.
I factory wipe, then try to install a different ROM.. for example I've tried PA & AOKP.
Every time I try this it fails within 1 second and I have to restore a backup and go back to Cyanogenmod.
EDIT: I have a T-Mobile Galaxy S3
I have attached an image of when I get an error when I try to flash.
UPDATE:
Alright so I was able to get past that error by going into advanced wipe and selecting "System". Now when I flash I get a new error. I am attaching a new picture.
You need to give more info on the error
Sent from my SGH-M919 using Tapatalk
serio22 said:
You need to give more info on the error
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm at work now. I'll post and update with the error later.
Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app
spartan268 said:
Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Mine is T-Mobile. I'm still at work til 2AM EST. I'll probably post my error tomorrow.
Alright guys, I attached a screenshot (picture lol) of my phone and the error I am getting when I try to flash different ROMs. Any help?
Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.
Shallwhat said:
Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.
Click to expand...
Click to collapse
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.
Noobiologist said:
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.
Click to expand...
Click to collapse
I've tried flashing multiple ROMS.. Slimbeam.. AOKP.. ParanoidAndroid.. I've downloaded from GOOManager and I've also downloaded from external links and put on my external SD card. Nothing works. Like I said in the OP I am running Cyanogenmod 10.2.. Android 4.3.1. I'm using the Ktweaker kernel.
I updated my TWRP from Goomanager and it only updated to 2.5.5.0. How do I get it to update to 2.6.3.1?
So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.
Same problem happened to me last night, I tried to install the modem again but the same error keep coming up.
To everyone with issues updating recovery. Goo has a openrecovery script issue. Your best bet is to flash latest Recovery using Odin. You may choose to use Mobile Odin if you feel like it.
Can't restore anything except Kitkat
I keep getting the same error, except I can't flash or restore any rom that isn't kitkat (all the kitkat roms are buggy so i want 4.3 back). I reflashed twrp 2.6.3.1 with odin but its still not letting me flash anything.
Also if it helps I can't copy anything from the internal SD to the external SD using twrp file manager.
Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3
I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?
Nothing will flash except Kitkat
Perseus71 said:
Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3
Click to expand...
Click to collapse
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something
Shallwhat said:
So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.
Click to expand...
Click to collapse
Did odin flash of the most current recovery take care of your issue?
Hastily spouted for your befuddlement
GodLik3 said:
I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?
Click to expand...
Click to collapse
What was the specific error message when flashing ?
QuatroQuatro said:
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something
Click to expand...
Click to collapse
What is your TWRP Version ? Also what is your Bootloader version ? (No its not the baseband)
My bootloader is T999UVUEMJC
My baseband is uvuemjc
TWRP is version 2.6.3.1 (I've also tried 2.6.3.0)
I think it got updated bootloader/baseband when I odin flashed stock tw 4.3 (the only jellybean ROM that works)
I also made a backup of my 4.4, but it wouldn't let me restore even that.
You have been talking about 2 different things.
1. Flash a New Rom - Either Touchwiz or AOSP. $.3 or newer.
2. Restore a Rom - I think you are talking about a Nandroid Restore.
If you are referring to Point 1 as "Restore Rom" then you need to change terminology in order to help us understand your problem correctly. Re-Flashing a rom that you used to have is still Flashing not "Restore".
With that UVUEMJC Bootloader, you can completely forget about flashing previous Touchwiz Firmwares such as UVDMD5 or UVDLJC. If you tried them, you WILL brick your phone. If you tried Custom Touchwiz Roms based on those 2 firmwares, it may or may not work.
Now if you are trying to flash a AOSP Rom, either 4.3 or Kitkat 4.4, and you do have latest TWRP, (2.6.3.1), please specify the error message in detail.
You must do Factory Reset and Wipe Dalvik + Cache in the Recovery before flashing the AOSP Roms.
I've been successfully running paranoid android 3.99 d2att rc2, android 4,3... i want to flash pacman rom 4.4.3 d2lte nightly.
I've updated cwm rom manager to the latest i could find v5.5.3.0 recovery set up 6.0.4.7
i tried going into script and deleting everything from behind mount. I've been on google for hours and still cant figure out why i keep getting status error 7
factory whipe/ reset , formatting system, data, ect... im lost pleas help lol.....galaxy s3 sgh-i747 canada virgin
also i don't know if its a related issue but only my older backup works, the newer ones I've made say md5 mismatch but the older one does what i need so it doesn't matter
Dmosavy said:
I've been successfully running paranoid android 3.99 d2att rc2, android 4,3... i want to flash pacman rom 4.4.3 d2lte nightly.
I've updated cwm rom manager to the latest i could find v5.5.3.0 recovery set up 6.0.4.7
i tried going into script and deleting everything from behind mount. I've been on google for hours and still cant figure out why i keep getting status error 7
factory whipe/ reset , formatting system, data, ect... im lost pleas help lol.....galaxy s3 sgh-i747 canada virgin
also i don't know if its a related issue but only my older backup works, the newer ones I've made say md5 mismatch but the older one does what i need so it doesn't matter
Click to expand...
Click to collapse
should i switch from cwm to twrp? would it make a difference
Dmosavy said:
should i switch from cwm to twrp? would it make a difference
Click to expand...
Click to collapse
i finally figured it out for anybody having the same issue... update recovery to philz touch cwm... now it all works
Dmosavy said:
i finally figured it out for anybody having the same issue... update recovery to philz touch cwm... now it all works
Click to expand...
Click to collapse
twrp is not a bad idea tho imo. touch part of philz cwm is awkward at best and begging for a fatal mistake in other words touching the wrong thing and poof there goes (fill in the blank). While recovery is no place to play around in and the same can happen using twrp, the overall features one being the customizable lockscreen timeout far outweigh cwm. plus whats up with the oddball multi zip flash folder thing on philz? not discrediting his work its more than i couldve done, just saying i feel team win makes a better product if you will. just my two cents.
Hey Guys,
I just got a new Samsung Galaxy S3 SGH-I747 in the mail and I immediately started to install Cyanogenmod. I have installed it on two S3's in the past, but this time I had no idea about the new bootloader problems after Android 4.3 (I think?). I got CWM touch installed with no problems via Odin, but when I tried to use the Unified Android Toolkit thing to root and stuff I got stuck in a boot loop. The phone would not boot past the Samsung logo, not the animated one with the purple light, but the one that shows the phone model.
I have tried everything I could think of and all that I tried to google for the past couple hours to no avail. I stupidly did not make a backup of my stock ROM, and I couldn't find a stock 4.4.2 ROM except this one that says it is stock but with root. I flashed that ROM and then it booted past the Samsung logo and the animated one, but is now stuck on the AT&T logo. I looked up that problem and couldn't find any real information on that problem except one thread where it said I should install Kies and let it do the Firmware Upgrade and Initialisation option. That failed and then my phone would only turn on straight to download mode.
I reflashed CWM and that worked so I thought that if I tried to install Cyanogenmod 11 it might work because that ROM is 4.4.1 or higher (Again, I think?). Now it's back into the loop where it makes it past the samsung stuff but then gets stuck on the AT&T logo. Is there anything I can do?
Thanks,
Jemimacakes
Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?
audit13 said:
Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?
Click to expand...
Click to collapse
Yes, I have tried clearing stuff in both CWM and stock recovery. Im not sure about the Dalvik one though, unless that is cleared when you do factory reset and clear cache I didnt do it. I can try flashing CM10.2 ( which I would prefer to have over 11), but my understanding is that my boot loader will not let me install anything that uses any lower versions of android, but I'll give it a shot and let you know.
Ok guys,
I tried to install Cyanogenmod 10.2 and when I put it on my sd card and tried to install it with CWM It threw and ton of errors that look like this.
assert failed: getprop("ro.bootloader") == "I747UCDLK3" || getprop("ro.bootloader") == "I747UCDMG3" || etc etc.
Im not super experienced with programming, but im guessing that CM10.2 can find any bootloader it can use? Im not sure what my bootloader is if that is the case, but I can boot into recovery so I must have something, right?
Anything I can do?
Thanks
Jemimacakes
You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?
Hey,
I did have the latest version of CWM, but I tried it on TWRP and got the same errors
audit13 said:
You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?
Click to expand...
Click to collapse
Hey,
I have now tried both custom recoveries and gotten the same errors on both, and I made sure I had the latest version of each. Can I flash the firmware from 4.3 and then install CM10.2? Will that work? I really don't want to hard brick my phone.
EDIT: I installed ADB to find out what my bootloader was, and it returned that I had the NE4 version. Is there a way to get the MJB version safely so I can install 10.2?
At this point I just want it to boot up to anything, so if that is easier to do than get CM to work then im completely open.
You cannot go back to MJB from NE4.
How did you try to install CM the first time? Did you use the install manager or a custom recovery?
The last time I installed CM on a i747 was back when the phone was on 4.1.1. The second phone I installed it on was the international version of the phone, also on 4.1.1. I used a custom recovery both times. I bet if I would have used the new installer on this phone it would have worked, but I was trying some other stuff because I was curious and ended up breaking it.
IT BOOTED!
I reflashed the stock firmware + root, reinstalled stock recovery and wiped everything I got it to boot into its stock ROM. From this point, where do I go? Will the CM installer work or will it just brick it again?
Thanks
Jemimacakes
I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.
audit13 said:
I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.
Click to expand...
Click to collapse
Which version of CM11 should I get. On the site I see that the last version of CM11 for the I747 (d2att) was released on feburary 16, is this one based on 4.4.2?
EDIT: Also, I should copy CM11 to both the internal and external storage? Why is this?
You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.
audit13 said:
You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.
Click to expand...
Click to collapse
Alright, but I have the at&t version of the phone. Are they both compatible with one another?
EDIT: OK, correct me if im wrong, but my new understanding is that CM now has releases for general versions of phones, so the most recent update of CM for my phone is the d2lte, not d2att?
Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.
audit13 said:
Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.
Click to expand...
Click to collapse
Hello again,
Thanks a ton Audit, my phone is up and running with the latest cyanogen nightly! A recap for anyone who might come across with a similar problem.
1. I installed a ROM using an older version of android onto a phone with the new bootloader (NE4), softbricking it.
2. I installed the stock ROM + root from this link using Clockworkmod
https://www.androidfilehost.com/?fid=23501681358550126
3. Installed the stock Recovery from this link and did wiped my data and both caches
https://www.androidfilehost.com/?fid=23681161096070493
4. I rebooted the phone and waited at the AT&T logo for a while, and it booted up normally!
5. I installed the most recent version of Philz Touch Recovery for the d2lte, made a nandroid for safety, and then install the latest nightly of CM11 for the d2lte.
6. It works!
Thanks again to Audit for helping me out!
Jemimacakes
I'm glad it all worked and I was able to help in some way.
It's great that you posted your solution in case it helps other people in a similar situation.
I think i'm in a similar place - a few questions. You used cwm to install the stock ROM? I thought you needed to use odin. Also, why did you need to install the stock recovery (and did you just flash the .zip in cwm)? Also, that stock rom you linked to is 4.4, right? Would that work if I was on 4.3?
Before flashing anything, I suggest you confirm your bootloader and modem. Flashing the wrong combination of modem and bootloader could hard brick your phone.
If your phone does not boot, try flashing Philz Touch for the d2lte and flash the latest cm11. Hoepfully, this will get your phone running so you can confirm the bootloader and modem. CM11 does not flash a modem or bootloader.
Maybe it's me missing something, I downloaded and installed PA 5.1, build from 20th May which I do not think is an Alpha that I would need to factory reset to do an OTA over.
However today OTA popped up with a update to the 28th May build, the upgrade seems to work but the phone then will not boot up instead I get the initial S3 screen twice with a blank screen in between then it drops in to recovery?
Think I am doing the update right i.e. download in OTA app, click install, phone reboots in to recovery runs install, reboots -- then in theory it should boot back up but at this point I have the above loop and back to recovery...
The recovery that I an using is Philz recovery - added it a couple of nights ago to install the original build of 5.1 and Gapps so that seems to work, there no errors with the OTA as its installed, the caches are being cleared first by the install script everything looks fine until the phone tries to boot back up. Have tried it 3 times now downloading a new copy of the OTA each time in case of corruption and restoring from a good backup on each failure.
Any ideas appreciated?
... and thank you in advance
paped said:
Maybe it's me missing something, I downloaded and installed PA 5.1, build from 20th May which I do not think is an Alpha that I would need to factory reset to do an OTA over.
However today OTA popped up with a update to the 28th May build, the upgrade seems to work but the phone then will not boot up instead I get the initial S3 screen twice with a blank screen in between then it drops in to recovery?
Think I am doing the update right i.e. download in OTA app, click install, phone reboots in to recovery runs install, reboots -- then in theory it should boot back up but at this point I have the above loop and back to recovery...
The recovery that I an using is Philz recovery - added it a couple of nights ago to install the original build of 5.1 and Gapps so that seems to work, there no errors with the OTA as its installed, the caches are being cleared first by the install script everything looks fine until the phone tries to boot back up. Have tried it 3 times now downloading a new copy of the OTA each time in case of corruption and restoring from a good backup on each failure.
Any ideas appreciated?
... and thank you in advance
Click to expand...
Click to collapse
Well, i'm on I9300 and all i can tell you is that i have the same exact problem with the same release, so you're not alone.
I was hoping this new release would work since the one of the 20 may didn't, but this one won't even boot.
I guess I9300 doesn't get love anymore...
You are not alone in this. It is happening with me too since the stable build of 28th May. I tried the on on June 12th too ...but even that is failing as well
How come it is a stable build when it has a bug like this and crashes the phone? Are we making a mistake? Does it require a different kernel or what can I do to make it work?!
~ Manthravadi
I'm stuck with this I have tried the last 3 ota updates with CWM, TWRP and Philz recovery all fail as above. Even tried downloading the full versions and doing a clean install with gapps and they fail. Could be a kernel issue but cannot find anything that states a dependency, is the kernel not part of the download like in a Linux OS? As never upgraded a kernel separately, how would you do that, is it another zip file, any ideas where to get it from?
paped said:
I'm stuck with this I have tried the last 3 ota updates with CWM, TWRP and Philz recovery all fail as above. Even tried downloading the full versions and doing a clean install with gapps and they fail. Could be a kernel issue but cannot find anything that states a dependency, is the kernel not part of the download like in a Linux OS? As never upgraded a kernel separately, how would you do that, is it another zip file, any ideas where to get it from?
Click to expand...
Click to collapse
I actually got it working finally a few days back.
You need to install boeffla kernel version 4 alpha 3 in order get the latest pa rom up and running. Go to boeffla-kernel website. In downloads select the device GT-I 9300. You will find CM12.1 NG version which is not yet stable. In that select version 4 alpha 3. Alpha 6 is latest but does not work too :/ Download Alpha 3 .. a .zip file which can be flashed using TWRP or Philz or CWM.
Wipe cache/dalvik-cache → flash boeffla → flash pa latest → flash pa gapps latest for 5.1
~ Manthravadi
Sent from my GT-I9300 using Tapatalk
I also have problem but thankfully when I did the steps above, it did finally boot but now I have another problem. My S3 boots properly and I can use it for a while then after a few mins it suddenly reboots with boot animation and all and I dunno what to do. It just keeps rebooting after a certain amount of mins.
@Aledresin: glad that I was able to help you. I am not experiencing any such issues at the moment. When the next PA build is released, try to flash it with boeffla 4 alpha 6.
Afaik ..some memory issues were fixed in alpha 6 and as you are using alpha 3..perhaps you are experiencing those issues.
~ Manthravadi
Sent from my GT-I9300 using Tapatalk
Manthravadi said:
I actually got it working finally a few days back.
You need to install boeffla kernel version 4 alpha 3 in order get the latest pa rom up and running. Go to boeffla-kernel website. In downloads select the device GT-I 9300. You will find CM12.1 NG version which is not yet stable. In that select version 4 alpha 3. Alpha 6 is latest but does not work too :/ Download Alpha 3 .. a .zip file which can be flashed using TWRP or Philz or CWM.
Wipe cache/dalvik-cache → flash boeffla → flash pa latest → flash pa gapps latest for 5.1
~ Manthravadi
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Do you happen to have a copy/mirror of "boeffla-kernel-4.0-alpha3-CM12.1-NG-i9300.recovery.zip"
I've been searching for a few days and can't find it anywhere. The official boeffla site no longer hosts this file and a lot of i9300 users need it to run the latest Paranoid OTA.
EDIT: Found it! It's available here: http://boeffla.df-kunde.de/sgs3/boef...load/Test/old/
Thanks to user Hawaiihemd for the info.
paped said:
Think I am doing the update right i.e. download in OTA app, click install, phone reboots in to recovery runs install, reboots -- then in theory it should boot back up but at this point I have the above loop and back to recovery...
Click to expand...
Click to collapse
I had a very similar problem and found that if I let it automatically reboot after flashing, then I was stuck just rebooting to recovery. If I manually shut down after flashing and manually booted, then everything worked fine. You may have the same thing happening here. I also used PhilzTouch and like it a lot. Thanks to the devs!
So my E980 will not turn wifi on with a custom ROM. I have tried probably 10 different roms and many different android version numbers with no change. The switch is greyed out and will not turn on at all. I have the following installed:
CM12-20150625-Snapshot-YNG4NAO09M
WildKernel
I believe Mack's modem
Gapps
Nothing will fix this. I have read where other people have installed stock Kernels to fix their issues but will doing that cause a problem because I am on android version 5.x+? Everything seems to work ok on the phone other than wifi and I really need that.
Have you tried to flash CM over full stock 4.1 without custom modem? All CM based roms recommended install is: flash stock 4.1 kdz through Lg Flash Tool 2014 cse flash, then root, then freegee + cwm, then CM. And only if something is wrong then patches.
Yeah that's how I have been doing it actually. I only started doing there kernels and stuff yesterday morning. I did find that blisspop v3.6 actually had working WiFi on my phone but it had other weird issues. It would randomly reboot and then go into reinstalling the ROM and it would also randomly shut my cellular data connection off by itself. Like I could watch it turn the switch off and on ine settings app. Those coupled with really bad battery life made me flash back to stock 4.1.2.
Then after flashing back to stock I went on and did the ota update to 4.4.2 but that caused issues with the screen not coming back on after making a phone call without doing a power cycle. I would love to run a custom ROM but none I have found are stable and only one has most all the stock features working in it.
Did you use recommended recovery version? Try upgrading from stock 4.1 directly to BlissPop using latest Philz Touch or TWRP 2.8.6.0 modified? Personally i prefer this recovery: https://www.androidfilehost.com/?fid=95916177934554356 for my E988. It can flash and backup modem and EFS.
xermit said:
Did you use recommended recovery version? Try upgrading from stock 4.1 directly to BlissPop using latest Philz Touch or TWRP 2.8.6.0 modified? Personally i prefer this recovery: https://www.androidfilehost.com/?fid=95916177934554356 for my E988. It can flash and backup modem and EFS.
Click to expand...
Click to collapse
The recovery part has always confused me. Thus far I have been downloading FreeGee Free off the playstore and using it to install CWM. I tried TWRP once but the interface wouldn't work right on my device. Some of the onscreen buttons would do different things than their label said (like Reboot would take me to a different screen, not Reboot) and the slider bar at the bottom wouldn't work.
How do you install the recovery using that Zip file? And could that be causing me problems?
Noggles10 said:
How do you install the recovery using that Zip file? And could that be causing me problems?
Click to expand...
Click to collapse
I'm installing it from recovery just like another zips (ROMs etc)
Problems? Theoretically, yes, if you flash recovery that isn't compatible with your device