Develop Bugs

New Update Message

Today I received the new update message, last time it tried to install it itself after 3 times postponed. But for for reason it failed. Is it because the phone is rooted ?
What if AT&T release the Jelly bean update in the future and I want to install it. How do I fix the update error message? Do I need to un-root the phone first ?

benzso63 said:
Today I received the new update message, last time it tried to install it itself after 3 times postponed. But for for reason it failed. Is it because the phone is rooted ?
What if AT&T release the Jelly bean update in the future and I want to install it. How do I fix the update error message? Do I need to un-root the phone first ?
Click to expand...
Click to collapse
+1. I also have stock LEM firmware and I am rooted(everything is stock though). When I try to update to LG1 via OTA, it downloads the update and reboots in CWM and fails to update. When I plugin via Kies to update, it times out.
Is there any way to update to LG1 when you are rooted?

AlwaysNoob said:
+1. I also have stock LEM firmware and I am rooted(everything is stock though). When I try to update to LG1 via OTA, it downloads the update and reboots in CWM and fails to update. When I plugin via Kies to update, it times out.
Is there any way to update to LG1 when you are rooted?
Click to expand...
Click to collapse
Correct me if I'm wrong but it should work if you have the stock recovery - which in your case you don't but not necessarily in the OP's case. Unless the OP wasn't perfectly clear.
Maybe you need to go back to stock first?

saj222 said:
Correct me if I'm wrong but it should work if you have the stock recovery - which in your case you don't but not necessarily in the OP's case. Unless the OP wasn't perfectly clear.
Maybe you need to go back to stock first?
Click to expand...
Click to collapse
Is there any way I can remove CWM and go back to stock recovery? I rooted my phone using this easy guide http://galaxys3root.com/galaxy-s3-r...gh-t999sgh-i747sph-l710-fail-proofnoob-proof/

I am not worry about the minor update from AT&T, we all expect to get Jell Bean soon. Just want to make sure we can download the update and install it properly without any errors. So should we go stock? What will be the steps? Download the stock firmware and use Odin flash it back?

I wouldn't worry about the official update. Usually in a day or two of official release, there will be an official firmware in package in the development section.

Did you mean we can just download the custom jelly bean firmware and install it as custom rom instead of the official one from AT&T? I think that make sense.
mrhaley30705 said:
I wouldn't worry about the official update. Usually in a day or two of official release, there will be an official firmware in package in the development section.
Click to expand...
Click to collapse

When its released, yes. That's one reason there are threads just for stock firmware.

Requesting Stock Koodo 4.1.2 update with root injected.

Hey folks. Just heard the 4.1.2 update is out. I am requesting for the stock koodo 4.1.2 with root injected into it. Preferably a flashable zip I can use through recovery. Seeing as I cant update through kies or OTA. Thanks guys. I hope I put this in the right spot and sorry for any duplicate threads in advance. I haven't seen anyone else send out a request yet on this matter.

Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Reidicus said:
Hey folks. Just heard the 4.1.2 update is out. I am requesting for the stock koodo 4.1.2 with root injected into it. Preferably a flashable zip I can use through recovery. Seeing as I cant update through kies or OTA. Thanks guys. I hope I put this in the right spot and sorry for any duplicate threads in advance. I haven't seen anyone else send out a request yet on this matter.
Click to expand...
Click to collapse
If it's actually up, it hasn't been uploaded here just yet. That being said, you could backup your stuff and update with http://www.sammobile.com/firmwares/ (go check if the firmware is out for SGH-747m).
It won't be pre-rooted but you can root after flashing it. Also, Odin is usually needed to flash stock.

Reidicus said:
Hey folks. Just heard the 4.1.2 update is out. I am requesting for the stock koodo 4.1.2 with root injected into it. Preferably a flashable zip I can use through recovery. Seeing as I cant update through kies or OTA. Thanks guys. I hope I put this in the right spot and sorry for any duplicate threads in advance. I haven't seen anyone else send out a request yet on this matter.
Click to expand...
Click to collapse
Stock with root injected is good if you don't want to trigger the flash counter incured by using a custom recovery. If it is a zip you will trigger the flash counter. The stock root injected would need to be done with odin or heimdall.
if you just want root then pulled the firmware from sammobile and then just root it.
Someone is bound to put up a rooted stock zip soon. are you rooted now ?

Yes I am. I originally used Odin to to do so. I found someone on here that had the koodo 4.1.1 with root already added.
Send from my awesome stock rooted I-747M from koodo.

Just to inform you, the flash counter was triggered using root66_KDO_I747MVLDLK4 through odin. It changed from official Samsung to custom and the counter to 1. This allows me to update through kies but not OTA. I want to use OTA so I can keep root. Here is what ive been trying...
Installed Triangle Away and reset the counter to 0 and back to Official Samsung SGH-I747M. I can now go into software update and perform an update. But now instead of saying my phone has been modified, it just does an endless searching for updates. My plan was to use voodoo root keeper but its pointless now if I cant even see that update.
Ohhh well. I can go back to stock and update that way (which I will eventually do) but I absolutely need root as I use my phone for ARliberator, OBD2, and much more.
I will keep searching and hoping I can find a way to update to 4.1.2 to keep root or just be patient and wait for someone to make a stock rooted version I can install through odin or flash recovery.

Reidicus said:
Just to inform you, the flash counter was triggered using root66_KDO_I747MVLDLK4 through odin. It changed from official Samsung to custom and the counter to 1. This allows me to update through kies but not OTA. I want to use OTA so I can keep root. Here is what ive been trying...
Installed Triangle Away and reset the counter to 0 and back to Official Samsung SGH-I747M. I can now go into software update and perform an update. But now instead of saying my phone has been modified, it just does an endless searching for updates. My plan was to use voodoo root keeper but its pointless now if I cant even see that update.
Ohhh well. I can go back to stock and update that way (which I will eventually do) but I absolutely need root as I use my phone for ARliberator, OBD2, and much more.
I will keep searching and hoping I can find a way to update to 4.1.2 to keep root or just be patient and wait for someone to make a stock rooted version I can install through odin or flash recovery.
Click to expand...
Click to collapse
It's just as easy to flash the update and then root. There are guides all over the stickies for it.

OK, I went ahead and updated with kies, then used CF autoroot with odin and now im upgraded with root. Now I feel like an idiot.... It seems so simple now and easy to do. I just made a bigger deal out of it than it was. Kept all my existing apps and info on the phone too. But made a backup just in case. You may now close this thread. Thanks!

[Q] Trying to downgrade from 4.4.2 (Cyanagenmod 11) to 4.1.2 stock (T999UVDMD5)

As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?

huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.

Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.

Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?

Yes you can go back to 4.3 Stock.

Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.

huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk

serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.

Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747

You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk

nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.

Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.

nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.

[Q] Stock Note 2 Issues

I will do whatever it takes to see if my data is still there. Then I need to get my warranty replacement.
I have a completely stock Note II (AT&T SGH-i317) that I believe is at 4.3 Jelly Bean I317UCUBMK6 (or ***MJ4, I don't know the difference). OTA firmware updates have never worked for my phone since I took it out of the box. Samsung/AT&T have no download link to an official 4.3 that I could use with ODIN to reflash[?] my phone.
I have had connector and battery issues for a while and suddenly last week my phone just hung at the AT&T carrier screen when I turned it on. I tried recovery mode>clear the cache and rebooting to no avail. In recovery it had told me it was unable to mount the EFS. I also saw online that there were, in fact, old leaked roms (4.3) from before 4.3 was released. Can I "flash"[?] to one of these from 4.3 not-leaked official? Again, not trying to lose any data...
I also saw this thread and didn't know if it would help:
http://forum.xda-developers.com/showthread.php?t=2589891
Thanks and I will seriously buy you a beer or other preferred beverage/donation if you can help.

Were you rooted when this happened or want to be rooted cuz if you download a stock att rom and flash though odin it should keep everything you have on there

terpin32 said:
Were you rooted when this happened or want to be rooted cuz if you download a stock att rom and flash though odin it should keep everything you have on there
Click to expand...
Click to collapse
That's the thing though--I attempted to use ODIN with the stock 4.1.2 ROM and it failed. Then I remembered I had 4.3 installed. I can't find a stock AT&T ROM for 4.3 anywhere!

talonreaper said:
That's the thing though--I attempted to use ODIN with the stock 4.1.2 ROM and it failed. Then I remembered I had 4.3 installed. I can't find a stock AT&T ROM for 4.3 anywhere!
Click to expand...
Click to collapse
That's y the 4.1.2 wont boot download this and flash this via odin
http://d-h.st/DGZ

Help me downgrade my galaxy s3 i747

Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks

mango man said:
Hi all.
Two weeks ago I got this device (sgh i747) was rooted and was stock 4.1.1. I installed cwm and made A backup of stock room. And flash AOKP custom kitkat rom. Now I want to downgrade back to stock. or if I cannot downgrade please suggest me a stable lollypop rom.
Things I have!
1:- rooted cwm installed (sgh i747)
Backup of stock rom 4.1.1
Please help .
Thanks
Click to expand...
Click to collapse
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.

Thanks for a very helpful reply. I m going to follow your instructions. Will soon replay. Thanks again.

dawgdoc said:
If you are still on the original bootloader and modem you should be able to revert to stock 4.1.1 by simply restoring the backup from your recovery. Before you attempt to do so verify that you are indeed on the 4.1.1 bootloader. This can be done with the Phone Info *Samsung* app by VndNguyen (?sp) from the playstore or by a couple of terminal emulator commands:
Code:
getprop ro.bootloader
getprop | grep version.baseband
If you do not already have terminal emulator installed, it may have come with the ROM, you can get it from the Playstore. It may also be a part of CWM recovery, it is part of TWRP I know for sure.
If it turns out you are on a newer bootloader and modem then go with a stock ROM that matches the bootloader and modem on the phone. To run a lollypop rom you will need to be on at least the NE4 bootloader and modem.
Click to expand...
Click to collapse
Okay got Samsung phone info app.
Boot loader version -------I747UCDLK3
Baseband version -----I747UCDLK3
And please explain LATEST NE4 BOOT LOADER.
Thanks

You are currently running the LK3 bootloader and modem. If I am not mistaken that's a pretty old one (original?). You will have to update to NE4 or newer firmware before you can flash any of the newer roms. They will not boot in the older ones.
Your firmware is actually the only one available for download so I recommend flashing it via Odin and factory resetting. Then update using the Software Update option in Settings > About Device.
You can download your LK3 firmware here: http://www.sammobile.com/firmwares/database/SGH-I747/
You may have to run Software update several times to fully update.
That is probably the safest and easiest course you can take.
After that, flash the latest custom recovery of your choice, then flash the rom you want.
Sent from my SGH-T999 using Tapatalk
---------- Post added at 12:17 PM ---------- Previous post was at 12:13 PM ----------
BTW, after flashing the LK3 firmware, you might want to consider using the free Sim unlock method. (Should be pretty easy to find).
Once you update past 4.3 you can no longer use it. It will allow the device to be used on other carriers networks, which can be beneficial if you ever want to sell it or switch carriers.
Sent from my SGH-T999 using Tapatalk

What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)

dawgdoc said:
What DocHoliday77 suggests is probably the safest method to get what you want. After each update the system will force you to wait 24 hours before you can make the next update. That would be three days to get to NE4, the first 4.4.2 release by AT&T, which you need to run lollipop ROMs. If you want to update to the current release (NJ2) that would be two additional days.
You can shortcut the required waiting period by manually advancing the system date after each update.
In addition to not allowing you to use the free unlock, once you take the 4.3 bootloader it prevents you from downgrading bootloaders. Newer bootloaders do the same, downgrading will be a thing of the past. (I never took the official 4.3 bootloader until the stagefright scare came along and I went from my older custom ROM to a new release.)
Click to expand...
Click to collapse
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks

mango man said:
1:- Okay I fully understood what I have to do to flash lolly pop . But confused a little bit . If I have original boodloader than it should be easier to restore my stock 4.1.1 . Backup (still not clear) .
2:- I am out of USA. The device in unlocked. I am using ZONG sim on it. So the question is can I still update the device via OTA.
Thanks
Click to expand...
Click to collapse
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.

I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk

dawgdoc said:
When you say original bootloader I don't know which you have. My i747 came with 4.1.1 but before I could get it out of the clerk's hands they had taken the OTA to change it from DLK3/4.1.1 bootloader and stock rom to MG2/4.1.2 bootloader and stock rom. Even more confusing I have read reviews that state the SGS3 was originally released with android 4.0.4.
If your original bootloader was older than 4.3 (MJB) AND you have never upgraded to MJB or newer, then you can safely return to stock 4.1.1.
To get OTAs you need to be on the stock ROM, at least you do in the USA. I don't know if that holds true elsewhere.
Click to expand...
Click to collapse
DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thanks men for quick response.
now I m fully confused. Don't know what to do. because I don't want to stuck on this battery enemy rom. (Aokp kitkat. Custom rom )
I am not clear about boootader version (PHONE INFO SAMSUNG APP SAYS ITS i747ucdlk3 ) but I know when got this thing. It was android 4.1.1 . Which I have back a backup. As per I am out of att network and I can't get OTA,s so I don't need to revert to 4.1.1 backup. I think I have to find out 4.3. For my device. So kindly please inform me if some one knows about . Iwill be very thankful to u people.
Again thanks

DocHoliday77 said:
I can confirm the S3 was originally shipped with 4.0.4! We were updated pretty quickly though.
As for the OTA'S, you do have to be full stock, not rooted. But you also have to be on AT&T network.
I don't know how far back the OTA'S are hosted around here, but enewman17 has several threads that provide the more recent ones. Hopefully someone will have the older ones. If I am not mistaken, you will have to update incrementally once you reach 4.3. (it's probably safe to jump straight to a 4.3 build if you can find the right firmware for it. But don't hold me to that as I am not 100% certain.
I'll look to see if I can find something you can use too.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this while searching online. Please tell me if it is helpful for.me.
http://androidromupdate.com/att-samsung-galaxy-s3-sgh-i747-odin-stock-firmware/

Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yup! I think it is. Will try . Thanks

mango man said:
Yup! I think it is. Will try . Thanks
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)

DocHoliday77 said:
Never been to that site, but it looks OK to me. Nice find in fact! All the usual firmware sites stopped getting the AT&T firmware a while back.
Anyway, just to clarify, LK3 is 4.1.1. UCDLK3 is just the build number.
If you want to get fully updated, I suggest Odin flashing the MJB (4.3) firmware. Then flash each of the OTA's until you are updated to where you want to be. (I would fully update, but that'll be up to you.) The OTA'S are intended to be flashed from stock recovery, but there is another option if you want to try it. Mobile Odin is an app by chainfire. It does require you to be rooted, but it will flash the OTA. Read his thread here on xda to learn more. It's one of my favorite apps tbh! Once you learn how to use it it makes flashing quite easy.
So my recommendation would be this:
Flash MJB with Odin.
Root using Towelroot (easiest root ever)
Install Mobile Odin and flash the OTA'S.
I hope that clears things up a bit!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)

mango man said:
Update:- I am stock 4.1.1 now . I restored the device from custom AOKP kit kat rom using the stock 4.1.1 backup which I have made via CWM recovery. The device is running perfectly.
*****tried to run OTA but it says ur. Device in up to date . Means I cant get any OTA up date . So the question is can I get any custom lollypop rom using this older bootloader. ? (LK3)
Click to expand...
Click to collapse
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.

dawgdoc said:
To be able to run a lollipop rom you will need to update bootloader and modem. Update them together, this is important once you reach the 4.4.2 level of bootloader and modem that you will need to run lollipop roms. Once you reach 4.4.2 you will brick your phone if the bootloader and modem versions are not the same.
Before starting to flash any of the files you need to get you up and running on lollipop, I strongly suggest you download all you need from start to finish. Store the files you will need in the upgrade process either on an external sdcard or on the root of your internal sdcard. I haven't used CWM Recovery on my SGS3 since shortly after rooting it, I have been using TWRP since then, and I don't recall all of the capabilities of CWM recovery. If the CWM version you have will not let you flash from an external sdcard you will need to store the files you will use on the root of the internal card to be able to flash them. It will be easier to do this before you start, unless you are comfortable with pushing files from a computer using adb.
BEFORE DOING ANYTHING I AM SUGGESTING read enough that you thoroughly understand what I am saying. After reading, ask questions for clarification. Be sure you have no doubts.
Decide if you intend to install a rom along with the bootloader and modem at each upgrade; or if you are going to install updating only bootloader and modem until you get them to them point that you can run a lollipop ROM. Since you said you can not do OTA updates, either way will work. Whichever you decide, you can not skip directly to the bootloader and modem you need for lollipop.
If you are installing bootloader and modems without the rom:
From the stock 4.1.1 rom and bootloader you can go straight to 4.3 bootloader and modem, skipping the 4.1.2 (MG2) version. I have personally done this with no ill consequences. After 4.3, install the first bootloader and modem version for 4.4.2, that is NE4. Lollipop will run with the NE4 bootloader. As DocHoliday stated, you can go on the the current bootloader and modem. After NE4 is NJ1. After NJ1 you come to the current bootloader and modem, which is NJ2
If you plan to install the full ROM at each step.
The page you linked to should work if all of the downloads are available. Go from 4.1.1 to 4.3 to 4.4.2 (NE4). If you want the newer versions (NJ1 or NJ2) do them in sequence, do not skip any that are mentioned. Read the instructions on your linked page carefully. If you want NJ1 and then NJ2 they can be found in threads by enewman17, as can NE4 and maybe 4.3. I didn't provide the links so that you will hopefully read the pages carefully after searching and before downloading. Be sure you understand what you are downloading to flash and how it should be used.
Click to expand...
Click to collapse
Thanks **** I need to be extra careful before taking any step. I am going to collect all relesed OTA,s. By now I onky need the links for ota. Thanks

Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Flash MJB and NE4 from the site you linked to above. Then use enewman17's thread for the NJ1 and NJ2 updates. He also has NE4, in case you want to get all the OTA'S from him. (Downloads will be a lot faster) They've all been used many times. I'll try to post a direct link in a few...
Sent from my SGH-T999 using Tapatalk
---------- Post added at 09:48 PM ---------- Previous post was at 09:39 PM ----------
NE4
http://forum.xda-developers.com/gal...are-update-t2808654/post53984772#post53984772
NJ1
http://forum.xda-developers.com/showthread.php?t=2941792
NJ1 and NJ2
http://forum.xda-developers.com/showthread.php?t=2985006
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I got this site having all ota, s . And is linked to the enewman17.
www.androidayos.com/samsung-galaxy-s3-stock-firmware-2/

Lol, I guess they thought they had to provide it somehow! It's a shame they didn't at least acknowledge enewman17 in their article there, but at least they direct linked to his thread.
Anyway, good luck! And if you have any other questions come up, let us know.
Sent from my SGH-T999 using Tapatalk