Related
This is basically an FYI, for those, like me, who didn't know.
I was on omega v5.2, and had (1) in the flash counter (due to flashing CF root via ODIN).
-I Used triangle away to reset
-And I ended up on:
Custom bin: No
Current bin: Sam official
System status: Official
Whilst being on Omega v5.2.
I then went ahead and flashed, via CWM Omega 6.0 and still retained the same (as above) status.
Here is a video of what I mean:
Hope this helped!
-Dubbed
Most know this already but thanks for the video for those who might not know :good:
jonny68 said:
Most know this already but thanks for the video for those who might not know :good:
Click to expand...
Click to collapse
No problem.
Out of interest, how do most know it?
I mean was it similar on the S2?
I wonder why your phone reacts so quickly when you press the home button - are you using a different launcher?
Sent from my GT-I9300 using xda premium
_stefans_ said:
I wonder why your phone reacts so quickly when you press the home button - are you using a different launcher?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I'm using Zeam launcher - for the home button lag - disable the home button when pressed for S-voice.
I also got transitions & pop-ups set to 0.5x rather than 1x (in dev options under settings)
So if the phone get damaged/bricked and i sent it off to Samsung, they wont know that i had a custom rom on it when it was damaged/Bricked ?
Dmxnet said:
So if the phone get damaged/bricked and i sent it off to Samsung, they wont know that i had a custom rom on it when it was damaged/Bricked ?
Click to expand...
Click to collapse
pretty much yeah
As long as you can't get the device to boot, neither will they, and if they get it into download mode - hey presto your "official" even though you're on a custom rom
Hey
Nice idea, can you pls make an 'how to' for this ?
Greetz
kLONkRIEGER90 said:
Hey
Nice idea, can you pls make an 'how to' for this ?
Greetz
Click to expand...
Click to collapse
by "how to" what do you mean?
kLONkRIEGER90 said:
Hey
Nice idea, can you pls make an 'how to' for this ?
Greetz
Click to expand...
Click to collapse
Posted how to Triangle Away .
http://forum.xda-developers.com/showthread.php?t=1494114
jje
THX but i mean how he do it after the triangle, did he just flash the Omega 6 and the CWM on it an that was it ?
kLONkRIEGER90 said:
THX but i mean how he do it after the triangle, did he just flash the Omega 6 and the CWM on it an that was it ?
Click to expand...
Click to collapse
In the OP it was written:
I was on omega v5.2, and had (1) in the flash counter (due to flashing CF root via ODIN).
-I Used triangle away to reset
-And I ended up on:
Custom bin: No
Current bin: Sam official
System status: Official
Whilst being on Omega v5.2.
I then went ahead and flashed, via CWM Omega v6.0 and still retained the same (as above) status.
Thus yes.
Mine says the following
Custom bin: No
Current bin: Samsung official
System status: Custom
why is status showing custom, should it not say official?
ahac85 said:
Mine says the following
Custom bin: No
Current bin: Samsung official
System status: Custom
why is status showing custom, should it not say official?
Click to expand...
Click to collapse
No idea - it should be official, if on stock etc.
TotallydubbedHD said:
No idea - it should be official, if on stock etc.
Click to expand...
Click to collapse
well im on a stock deodexed rom, but im guessing no matter what rom it should say official?
ahac85 said:
well im on a stock deodexed rom, but im guessing no matter what rom it should say official?
Click to expand...
Click to collapse
its because you're on deodexed....
Doesn't matter - unless you send it in for warranty.
so will any custom rom show system status as custom, because the video in the first post states hes using a custom rom and his system status is official? and any official samsung firmware it change it back to official.
EDIT: just flashed insecure kernel to bump up the binary counter to +1 and now used triangle away and its reporting:
Custom bin: No
Current bin: Samsung official
System status: Offical.
It appears there may have been an issue when trying to reset it with triangle away.
ahac85 said:
so will any custom rom show system status as custom, because the video in the first post states hes using a custom rom and his system status is official? and any official samsung firmware it change it back to official.
EDIT: just flashed insecure kernel to bump up the binary counter to +1 and now used triangle away and its reporting:
Custom bin: No
Current bin: Samsung official
System status: Offical.
It appears there may have been an issue when trying to reset it with triangle away.
Click to expand...
Click to collapse
there wasn't any issue...you were on a deodexed rom, and thus why it was set as custom.
Now you reset it, it's fine.
In terms of flashing -again depends how you flash it....watch the video I explain everything in it.
Apologies for being a total noob on this topic.
From what you've explained flashing via ODIN increments counter and flashing via CWM doesn't?
kinnyfaifai said:
Apologies for being a total noob on this topic.
From what you've explained flashing via ODIN increments counter and flashing via CWM doesn't?
Click to expand...
Click to collapse
basically yes - but if flashing a stock rom = no.
Hello All,
I have been using Illusion 4.2.2 and want to go to 4.3.
I have been facing the following issues -
1) After upgrading to the latest cwm (6.0.3.8), I tried flashing PA 4.3. With a clean wipe and format system, it gave me a status 7 error (installation aborted).
One of XDA members redirected me to this - http://forum.xda-developers.com/showthread.php?t=2321310. I followed this and following is the screenshot of what I have after upgrading the bootloader : (Below jpg which says "Just after upgrading bootloader)
2) I could now flash the rom but when I rebooted after flashing , I don't have root access and neither do I see any att network / data . Following are the screenshots -
(Just after flashing 4.3 Page 1/2 and No root access after flashing 4.3).
ND
_ND_ said:
Hello All,
I have been using Illusion 4.2.2 and want to go to 4.3.
I have been facing the following issues -
1) After upgrading to the latest cwm (6.0.3.8), I tried flashing PA 4.3. With a clean wipe and format system, it gave me a status 7 error (installation aborted).
One of XDA members redirected me to this - http://forum.xda-developers.com/showthread.php?t=2321310. I followed this and following is the screenshot of what I have after upgrading the bootloader : (Below jpg which says "Just after upgrading bootloader)
2) I could now flash the rom but when I rebooted after flashing , I don't have root access and neither do I see any att network / data . Following are the screenshots -
(Just after flashing 4.3 Page 1/2 and No root access after flashing 4.3).
ND
Click to expand...
Click to collapse
Some roms you have to turn on root access; should be in the install post. Are you running the right rom for your device?
thepoetlives89 said:
Some roms you have to turn on root access; should be in the install post. Are you running the right rom for your device?
Click to expand...
Click to collapse
I eliminated that possibility because the same thing happened with two different roms (PA 4.3 and Illusion 4.3). I am on ATT and this phone is a ATT phone , and I am flashing all roms within this thread
_ND_ said:
I eliminated that possibility because the same thing happened with two different roms (PA 4.3 and Illusion 4.3). I am on ATT and this phone is a ATT phone , and I am flashing all roms within this thread
Click to expand...
Click to collapse
I know with illusion you have to ::Settings -> Developer options -> Root access to apps and/or adb. to get root access. Where are you getting basebands from? The latest is I747UCDMG2 but I747UCDLK3 should work too. Get them from HERE
thepoetlives89 said:
I know with illusion you have to ::Settings -> Developer options -> Root access to apps and/or adb. to get root access. Where are you getting basebands from? The latest is I747UCDMG2 but I747UCDLK3 should work too. Get them from HERE
Click to expand...
Click to collapse
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
_ND_ said:
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
Click to expand...
Click to collapse
some more research told me that I have lost my imei number. I remember taking a backup of my efs folder the first time I rooted my phone a year back. Can anyone help me restore my network using that backed up folder ?
_ND_ said:
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
Click to expand...
Click to collapse
Baseband is Here. I would suggest MG2 baseband as it is more compatible with 4.3 than older than LK3. Get it from the link i just gave you and follow instructions on the page. Only use odin for reverting back to STOCK.
thepoetlives89 said:
Baseband is Here. I would suggest MG2 baseband as it is more compatible with 4.3 than older than LK3. Get it from the link i just gave you. ^^ and flash through recovery. Only use odin for reverting back to STOCK.
Click to expand...
Click to collapse
I tried the MG2 but the baseband still shows up as Unknown in About
_ND_ said:
I tried the MG2 but the baseband still shows up as Unknown in About
Click to expand...
Click to collapse
Huh thats weird. The only thing i can think of is something is wrong with the rom or you are flashing a non d2att rom.
thepoetlives89 said:
Huh thats weird. The only thing i can think of is something is wrong with the rom or you are flashing a non d2att rom.
Click to expand...
Click to collapse
I suspected that but since a lot of people are already using that rom and I made sure I am downloading d2att , those things are eliminated.
I am thinking the 4.3 flashing erased my previous efs folder and that is why it cannot find my imei number anymore - resulting in no network.
_ND_ said:
I suspected that but since a lot of people are already using that rom and I made sure I am downloading d2att , those things are eliminated.
I am thinking the 4.3 flashing erased my previous efs folder and that is why it cannot find my imei number anymore - resulting in no network.
Click to expand...
Click to collapse
When you get imei back i would suggest a nvbackup to make sure you keep a good backup of your imei.
thepoetlives89 said:
When you get imei back i would suggest a nvbackup to make sure you keep a good backup of your imei.
Click to expand...
Click to collapse
I had a nvbackup but since I flashed a different of baseband , I was not able to recover.
Anyways, I flashed stock through odin and looks like I have my network back.
Any recommendation of which 4.3 rom will not cause this again ? Anyone ?
try updating roms from ics up to 4.3and update modem and bootloader.
Hi,
Have a Note II as an alternative phone. Apparently, the phone worked correctly until last month. It started to reboot, not too much, but it happened. Well, I tried to give a solution changing the ROM (when it started with the problem I was in 4.4.2 OmniROM). My first try was with Omega ROM, cause it was my first custom ROM when I bought the phone with 4.1.2 in, but the problem persist (maybe increment the number of reboots-freezes/day) so I changed it again to Android Revolution HD, but it only increment the reboots/freezes.
It seems that it's not a ROM installation problem or something like that, maybe it's a hardware problem, but I would like to hear your opinions about it.
Now the phone have:
TWRP recovery
Rooted
Android Revolution HD
I am thinking on put the stock ROM and bootloader with Odin. What do you think?
Thanks!
Could you enter recovery, format /system /data /cache and flash clean Omni > reboot >reboot to recovery >flash Gapps> reboot and observe without installing any apps. Until it freezes or reboots anyway.
My dad also has note 2,he had the same problem on many different roms.
He had to give it back to repair. They've replaced power button and something else, after that the phone seems normal.
Sent from galaxy n7105
mat9v said:
Could you enter recovery, format /system /data /cache and flash clean Omni > reboot >reboot to recovery >flash Gapps> reboot and observe without installing any apps. Until it freezes or reboots anyway.
Click to expand...
Click to collapse
Hi mat9v,
Thanks for your reply. I am in the office now, but I will try it as soon as I can. I thought on your suggestion too, so I will give a chance .
In case of it does not working, if I restore to stock ROM, will it restore the bootloader and recovery automatically too?
My actual bootloader if I am not wrong, is MJ5 bootloader (to fix the WiFi problems with custom ROMs in 4.3).
Thanks!
Edit:
jakuburban said:
My dad also has note 2,he had the same problem on many different roms.
He had to give it back to repair. They've replaced power button and something else, after that the phone seems normal.
Sent from galaxy n7105
Click to expand...
Click to collapse
Did you repair it even with custom ROM? Samsung does not accept it, right? Anyway, my phone is not in guarantee time.
Thanks!
Nah, of course I restored it to official 4.1.2 so everything was like new.
If You don't have guarantee, not good
Sent from galaxy n7105
pep0te said:
Hi mat9v,
Thanks for your reply. I am in the office now, but I will try it as soon as I can. I thought on your suggestion too, so I will give a chance .
In case of it does not working, if I restore to stock ROM, will it restore the bootloader and recovery automatically too?
My actual bootloader if I am not wrong, is MJ5 bootloader (to fix the WiFi problems with custom ROMs in 4.3).
Thanks!
Click to expand...
Click to collapse
Yes, it will overwrite both bootloader and recovery, unroot and so on. Be careful with KNOX and look for TriangleAway to reset flash status to factory.
jakuburban said:
Nah, of course I restored it to official 4.1.2 so everything was like new.
If You don't have guarantee, not good
Sent from galaxy n7105
Click to expand...
Click to collapse
Hope I can fix it by other way then . Thanks!
mat9v said:
Yes, it will overwrite both bootloader and recovery, unroot and so on. Be careful with KNOX and look for TriangleAway to reset flash status to factory.
Click to expand...
Click to collapse
Hm, could you explain me a bit? Sorry if my question is stupid.
Thanks a lot.
pep0te said:
Hope I can fix it by other way then . Thanks!
Hm, could you explain me a bit? Sorry if my question is stupid.
Thanks a lot.
Click to expand...
Click to collapse
If you want to return the phone to service center you mast be careful to maintain KNOX status 0 and Software status: Factory or they may refuse to fix the phone (warranty void by messing with software) - it's not such a big deal here in Europe but in US there are some stupid rules like that. So long as you remain on MJ5 bootloader you should have no problem with KNOX when you flash Samsung firmware but Firmware status: Modified vs Factory require using TriangleAway program to reset specific counters. Find it on Playstore and follow the link there to explanation on how to proceed.
mat9v said:
If you want to return the phone to service center you mast be careful to maintain KNOX status 0 and Software status: Factory or they may refuse to fix the phone (warranty void by messing with software) - it's not such a big deal here in Europe but in US there are some stupid rules like that. So long as you remain on MJ5 bootloader you should have no problem with KNOX when you flash Samsung firmware but Firmware status: Modified vs Factory require using TriangleAway program to reset specific counters. Find it on Playstore and follow the link there to explanation on how to proceed.
Click to expand...
Click to collapse
Hi mat9v,
Just fyi, I am from Europe . So this mean that I should check if Firmware status is "Modified" or "Factory" and KNOX = 0. In case of it is "Modified" (most probably right?) or KNOX = 1 or more, I must use TriangleAway to reset the counters.
That's okay, thank you all for your help . I will try and give my feedback asap!
pep0te said:
Hi mat9v,
Just fyi, I am from Europe . So this mean that I should check if Firmware status is "Modified" or "Factory" and KNOX = 0. In case of it is "Modified" (most probably right?) or KNOX = 1 or more, I must use TriangleAway to reset the counters.
That's okay, thank you all for your help . I will try and give my feedback asap!
Click to expand...
Click to collapse
You can't reset KNOX counter if you are on a bootloader newer than MJ5 (it's been tested that on MJ5 you can deal with it by flashing earlier firmware along with older bootloader). More info HERE
mat9v said:
You can't reset KNOX counter if you are on a bootloader newer than MJ5 (it's been tested that on MJ5 you can deal with it by flashing earlier firmware along with older bootloader). More info HERE
Click to expand...
Click to collapse
How can I check my bootloader? I am almost sure that is MJ5 but... better to check.
Thanks!
Edit:
The stock ROM I should install is the 4.3 I choose in sammobile, right? Spain country in my case.
http://www.sammobile.com/firmwares/3/?download=23362
Thank you.
pep0te said:
How can I check my bootloader? I am almost sure that is MJ5 but... better to check.
Thanks!
Edit:
The stock ROM I should install is the 4.3 I choose in sammobile, right? Spain country in my case.
http://www.sammobile.com/firmwares/3/?download=23362
Thank you.
Click to expand...
Click to collapse
To check bootloader install "Info" by Nag from Playstore and look in OS category.
Yes, but it will flash bootloader newer than MJ5 I think (MJ9 if my memory serves me right) and you may not be able to set KNOX to 0. Also you must play with TriangleAway before flashing stock 4.3 because it does not work on stock (root required).
Since you are in Europe, it should not matter too much (according to European law) so if someone makes any heat just say that it a law
mat9v said:
To check bootloader install "Info" by Nag from Playstore and look in OS category.
Yes, but it will flash bootloader newer than MJ5 I think (MJ9 if my memory serves me right) and you may not be able to set KNOX to 0. Also you must play with TriangleAway before flashing stock 4.3 because it does not work on stock (root required).
Since you are in Europe, it should not matter too much (according to European law) so if someone makes any heat just say that it a law
Click to expand...
Click to collapse
Amazing, alright now. Hope I can fix this usual problem...
Thanks for your complete and helpful answers!
mat9v said:
To check bootloader install "Info" by Nag from Playstore and look in OS category.
Yes, but it will flash bootloader newer than MJ5 I think (MJ9 if my memory serves me right) and you may not be able to set KNOX to 0. Also you must play with TriangleAway before flashing stock 4.3 because it does not work on stock (root required).
Since you are in Europe, it should not matter too much (according to European law) so if someone makes any heat just say that it a law
Click to expand...
Click to collapse
Hi again,
My bootloader (Info app) is:
Bootloader: N7100XXDLL7
I think this is the old (4.1.2) right?
Sent from my Nexus 5 using xda app-developers app
pep0te said:
Hi again,
My bootloader (Info app) is:
Bootloader: N7100XXDLL7
I think this is the old (4.1.2) right?
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yes, and it is probably the reason for Android Revolution problems. If I remember correctly it is a 4.3 rom and they have compatibility problems with older bootloaders - the results are random reboots and freezes (there is a lot about it in Phoenix rom thread). To comfortably use TW 4.3 rom it's best to update bootloader to MJ5. AOSP roms should not be affected though so I suppose that there was some other cause for this. You can flash 4.1.2 on this bootloader without issue, be mindful to safeguard data from your internal sdcard as you may loose them all.
I would advise testing standard 4.1.2 version and if everything works fine, flashing something new (with MJ5 bootloader for compatibility sake).
mat9v said:
Yes, and it is probably the reason for Android Revolution problems. If I remember correctly it is a 4.3 rom and they have compatibility problems with older bootloaders - the results are random reboots and freezes (there is a lot about it in Phoenix rom thread). To comfortably use TW 4.3 rom it's best to update bootloader to MJ5. AOSP roms should not be affected though so I suppose that there was some other cause for this. You can flash 4.1.2 on this bootloader without issue, be mindful to safeguard data from your internal sdcard as you may loose them all.
I would advise testing standard 4.1.2 version and if everything works fine, flashing something new (with MJ5 bootloader for compatibility sake).
Click to expand...
Click to collapse
Thanks. You suggest to flash 4.1.2 stock from sammobile right? I mean, it should install the same bootloader that I have now.
Thanks again!
Sent from my Nexus 5 using xda app-developers app
pep0te said:
Thanks. You suggest to flash 4.1.2 stock from sammobile right? I mean, it should install the same bootloader that I have now.
Thanks again!
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Yes, exactly.
mat9v said:
Yes, exactly.
Click to expand...
Click to collapse
Okay, I will do it then. Thanks a lot! :fingers-crossed:
mat9v said:
Yes, exactly.
Click to expand...
Click to collapse
Hey mat9v,
I am trying to reset the counter but it still shows "1" (before this, it showed "7"). Do you know why can't get to fully reset it?
Thanks!
pep0te said:
Hey mat9v,
I am trying to reset the counter but it still shows "1" (before this, it showed "7"). Do you know why can't get to fully reset it?
Thanks!
Click to expand...
Click to collapse
To fully reset the counter it has to be done in certain order. I do not remember exactly in which order the sequence of events should proceed but it went something like this:
- run triangle away
- reboot
- enter download mode (odin version)
- flash stock rom
If you reboot even once to custom rom (this I'm certain) or even custom recovery (I think) the triangle away effect will be gone and the count returns to 1 because it detects custom rom/kernel.
I have a custom 4.4.2 rom which I like. However, my phone shuts down by itself..
1 - Will wiping do any good? (and what should I wipe?)
2 - Should I install a stock rom?
2b - what and when should I wipe after installing from odin?
With thanks
Carmelious said:
I have a custom 4.4.2 rom which I like. However, my phone shuts down by itself..
1 - Will wiping do any good? (and what should I wipe?)
2 - Should I install a stock rom?
2b - what and when should I wipe after installing from odin?
With thanks
Click to expand...
Click to collapse
Very little information you give to help you out.
What is your current status concering latest firmware you flashed or updated to, bootloader eg.?
What CR are you on, under which circumstances your device shuts down?
how to I know about my bootloader? what is cr?
firmware is xxufnd3
it shuts down sometimes on its own, sometimes after a call ends.
Carmelious said:
how to I know about my bootloader? what is cr?
firmware is xxufnd3
it shuts down sometimes on its own, sometimes after a call ends.
Click to expand...
Click to collapse
Download phone info app for samsung from playstore and in there you'll see your bootloader version.Let us know which bootloader you are on.CR means custom rom. So which custom rom are you running?Also while replying click on "quote message in reply" at the bottom of the reply box so the person gets notified about it or else we might not visit this thread to check if you have replied to us or not and you'll be left wondering.
Androidwizzard said:
Very little information you give to help you out.
What is your current status concering latest firmware you flashed or updated to, bootloader eg.?
What CR are you on, under which circumstances your device shuts down?
Click to expand...
Click to collapse
singhpratik87 said:
Download phone info app for samsung from playstore and in there you'll see your bootloader version.Let us know which bootloader you are on.CR means custom rom. So which custom rom are you running?Also while replying click on "quote message in reply" at the bottom of the reply box so the person gets notified about it or else we might not visit this thread to check if you have replied to us or not and you'll be left wondering.
Click to expand...
Click to collapse
firmware is xxufnd3
bootloader n7100xxalj3
Phoenix 18.5 custom rom (also had same issues with 18.8)
Update: Already made wipe data and dalvik. Results gave me further issues.
my choices now are:
-stock rom
-very stable cr
-having the phone fixed at lab (\buy note 3)
Carmelious said:
firmware is xxufnd3
bootloader n7100xxalj3
Phoenix 18.5 custom rom (also had same issues with 18.8)
Update: Already made wipe data and dalvik. Results gave me further issues.
my choices now are:
-stock rom
-very stable cr
-having the phone fixed at lab (\buy note 3)
Click to expand...
Click to collapse
Bootloader is your problem since it's an old one phone is unstable. In my signature where it says version 4&5 click on it and search for MJ5 bootloader ( Knox free 4.3 bootloader ) and flash it using Odin there are instructions on that post on how to flash bootloader via Odin. Also another option you have is flashing Kitkat bootloader ND3 (Knoxed bootloader which voids warranty but you'd be able to charge your phone by turning it off unlike MJ5 you can't charge your phone by turning it off it will boot right back up but this bootloader will preserve your warranty ) So once you decide which modem you need according to if you want to preserve warranty or not your phone will be stable and ready to use like the rest of us . Good luck.
You'll find ND3 bootloader in that same version 4&5 FAQ link of mine .
Sent from my GT-N7100 using Tapatalk
Hallo,
I want to Install the global Rom in my Red Magic 6. But I cant Start the system Update( official way from Nubia). How I can Install the global Rom. The bootloader ist Lock any Help to unlock the Bootloader and flash the Rom.
Uniilo said:
Hallo,
I want to Install the global Rom in my Red Magic 6. But I cant Start the system Update( official way from Nubia). How I can Install the global Rom. The bootloader ist Lock any Help to unlock the Bootloader and flash the Rom.
Click to expand...
Click to collapse
You can install Global Rom by yourself using North America & Asia V4.12 ROM
pppwaung said:
You can install Global Rom by yourself using North America & Asia V4.12 ROM
Click to expand...
Click to collapse
But how?? I cant Start the Installation using the system Update. I tried to unlock the Bootloader but I coulden't
Uniilo said:
But how?? I cant Start the Installation using the system Update. I tried to unlock the Bootloader but I coulden't
Click to expand...
Click to collapse
No need to unlock. You can install Through the system tools directly.
1.Reset factory
2.Install rom 4.12
3.Reset factory again
4.enjoy Na Rom
pppwaung said:
No need to unlock. You can install Through the system tools directly.
1.Reset factory
2.Install rom 4.12
3.Reset factory again
4.enjoy Na Rom
Link example
Discover Popular Videos | Facebook
Facebook Watch is the place to enjoy videos and shows together. Find the latest trending videos, discover original shows and checkout what's going on with your favorite creators.
bit.ly
Click to expand...
Click to collapse
I can't Start the system Update. There ist an Software Problem hier.
Uniilo said:
I can't Start the system Update. There ist an Software Problem hier.
Click to expand...
Click to collapse
Please study the video that I have attached first. It is recommended to disconnect the network before installing the ROM.
bit.ly/2R9GaH0
Uniilo said:
Hallo,
I want to Install the global Rom in my Red Magic 6. But I cant Start the system Update( official way from Nubia). How I can Install the global Rom. The bootloader ist Lock any Help to unlock the Bootloader and flash the Rom.
Click to expand...
Click to collapse
wipe user data by factory recovery. It looks like you haven't skipped the ROM properly.
pppwaung said:
Please study the video that I have attached first. It is recommended to disconnect the network before installing the ROM.
bit.ly/2R9GaH0
Click to expand...
Click to collapse
The Link is not working
pppwaung said:
wipe user data by factory recovery. It looks like you haven't skipped the ROM properly.
Click to expand...
Click to collapse
Still not Working
Uniilo said:
ยังไม่ทำงาน
Click to expand...
Click to collapse
You can try to restore factory again. Are you using EU ROM to flash?
Uniilo said:
Hallo,
I want to Install the global Rom in my Red Magic 6. But I cant Start the system Update( official way from Nubia). How I can Install the global Rom. The bootloader ist Lock any Help to unlock the Bootloader and flash the Rom.
Click to expand...
Click to collapse
If you aren't able to get it to work try using "Shortcut Master" app (Download via Play Store) and try to launch the update settings with that.
pppwaung said:
You can try to restore factory again. Are you using EU ROM to flash?
Click to expand...
Click to collapse
I want to flash a EU Rom. But the Bootloder is locked und i cant unlock it via CMD
chocolote4444 said:
If you aren't able to get it to work try using "Shortcut Master" app (Download via Play Store) and try to launch the update settings with that.
Click to expand...
Click to collapse
What is the name of the schortcut, i schould start ?
Uniilo said:
What is the name of the schortcut, i schould start ?
Click to expand...
Click to collapse
Select "App Explorer"
Scroll down and click on "System Update"
Then tap on the LocalUpdate activity
chocolote4444 said:
Select "App Explorer"
Scroll down and click on "System Update"
Then tap on the LocalUpdate activity
Click to expand...
Click to collapse
I didn't Found the System Update.
I found the Localupdate activity on the Factory Test.
It's opend and i clicked on the rom, the Installation dosen't start. Did u know another way to install the rom on the phone like Flash it.
It might be a long shot, but you could try erasing app data of the system update app:
Settings -> App Info -> 3 dots in the upper right -> Show System
Then scroll down to System Update -> Storage -> Clear Cache + Clear User Data
Since I'm not sure if this will work at all, you might wanna try a reboot afterwards, if you still can't access the system updater.
Uniilo said:
Hallo,
I want to Install the global Rom in my Red Magic 6. But I cant Start the system Update( official way from Nubia). How I can Install the global Rom. The bootloader ist Lock any Help to unlock the Bootloader and flash the Rom.
Click to expand...
Click to collapse
I still have that problem, you managed to solve it?
i also have exactly the same problem! someone please help me, i am new to android stuff and i am desperate i attach a screen recording with my problem. how can i update my red magic 6 pro with the newest global EU rom if i cant access system updates? please and thank you!!
darclon888 said:
i also have exactly the same problem! someone please help me, i am new to android stuff and i am desperate i attach a screen recording with my problem. how can i update my red magic 6 pro with the newest global EU rom if i cant access system updates? please and thank you!!
Click to expand...
Click to collapse
I have the same problem, some one know how to solve it?
I have the same problem with Red Magic 6r