Related
I had a question about a charger - I'm interested in getting a second charger for the Vibrant. I see that the charger that comes with the Vibrant says it has an output of 5.0V and 0.7A.
If I have an old LG charger that has an output of 5.1V and 0.7A, would that work. Could it damage the battery in my Vibrant, in anyway.
Thanks.
Not sure about your old charger, but it should work. Try it out at your own risk though.
I did want to comment on the chargers for the Vibrant. The phone seems to want a lot of current to charge properly. I was using an older 5V 500mA charger that served me well with my G1 and older BB Pearl. I had the Vibrant on it and it wouldn't charge fully. I also noticed the same thing when I would hook-up the vibrant to my notebook (typically 500mA max per port).
The good news is that there are a lot of cheap 5V 1A chargers on eBay. Just make sure to check a charger's spec before buying one.
$1.75 wall charger - http://cgi.ebay.com/US-AC-Power-USB...er_MP3_Player_Accessories&hash=item4aa03f4b9a
I also bought 5V 1A car chargers and mini USB to micro USB adapters so that I can use my old USB to mini USB cables when I am on the go.
$2.40 car charger - http://cgi.ebay.com/1000mA-1A-USB-C...er_MP3_Player_Accessories&hash=item4399e189d1
Charge only $1 - http://shop.ebay.com/i.html?LH_BIN=...r&_dmpt=PDA_Accessories&_trksid=p3286.c0.m301
Charge + Data $2 - http://shop.ebay.com/i.html?_nkw=mi...adapter&_osacat=0&_trksid=p3286.c0.m270.l1313
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Vegastouch said:
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Click to expand...
Click to collapse
Tried my old charger .. it works but is really slow compared to the one that came with the Vibrant. Probably going to end up purchasing an extra one for when I travel.
Personally I don't mind something charging slower when I travel as long as I'm getting more power to the phone than I'm using of course.
Monoprice has 1000mA
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The extra 300mA will not damage the phone. Most smart phones require 700mA-1A to charge properly. But be careful, cheapo charger has potential to fry your phone. Anytime I buy a charger from ebay or cheap vendor, I plug it in to my old MP3 player for a week before I use it with my newer devices.
I have the same one that you see on monoprice. I've been using it for almost 2 years with no problem at all, YMMV tho.
I'd recommend this one. Looks identical to the charger that comes with my 3GS. Works well, I use it every day at work for more than 6 months now. Again, YMMV.
http://www.dealextreme.com/details.dx/sku.26446#open full view
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
the max charge rate for a Li-ion battery is 1C. So you could charge at up to 1500mA.
I ordered that exact charger a few days ago.
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The amperage rating only tells you the *maximum* possible output. The device (your phone) controls the current draw. As long as the voltage matches (5v), you can use a charger with any amperage rating which is 700mA (0.7A) or higher.
(Note that this only applies to chargers that your phone plugs into. You have to be more careful with the self-contained spare-battery chargers (where you remove the battery from the phone and put it into the charger). But those are normally battery-specific anyway.)
Also, you *might* risk damaging the battery through long-term usage of a charger that can't supply at least the minimum amperage (such as the sfsilicon's 500mA transformer). The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
MV10 said:
.......
. The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
Click to expand...
Click to collapse
that might explain why my laptop wouldn't always charge to 100% - first few times it did, and i'd find the notification msg when i'd close the laptop, but last few times it didn't
learn something every day
as i use the vibrant tethered every nite while browsing (which is when it was charging), any problem with finishing the charge with the samsung wall charger? ie interrupting the charge when i take it off the laptop?
I see that the wall charger for the Galaxy Nexus outputs 5V and 1A. Unfortunately, none of the extra chargers I'd like to use as additional chargers have this output. Some of them are 5.1V, and some of them all put out under 1A.
From what I understand, using a charger w/ a higher voltage could potentially damage the phone. I know that this unlikely considering it's only an extra .1V in my case, but I don't want to risk it.
As for the amps, I believe that using lower amps isn't dangerous, but may result in charging taking longer than normal.
Are these two assumptions correct? Also, does anyone know of any cheap chargers that put out 5V/1A? If you put in "phone charger" in Amazon, the second hit is a Samsung OEM charger that puts out 5V/0.7A, but I'd rather get one that is going to be an exact match.
700-800mah are fine and acceptable for charging. But if wanting to play games on a charger and still get some kind of charge, go with a 1000 mah charger. 1000 mah charger is also best to use while using mhl so you can hopefully not lose battery charge while streaming video over hdmi.
Sent from my samsung gt i9250 which is in the wrong country.
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Micro-Travel-Charger-M540/dp/B002HJBM04
http://www.amazon.com/Samsung-Travel-Charger-Adapter-MicroUSB/dp/B0049IE70I
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
alee said:
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
Click to expand...
Click to collapse
it's.. 24 bucks ... for a charger..
lol fml
Dmw017 said:
it's.. 24 bucks ... for a charger..
lol fml
Click to expand...
Click to collapse
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
alee said:
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
Click to expand...
Click to collapse
...you say it folds too huh :/ ....
but for that price, i wonder if there are any samsung chargers that are just as good if not better..
that is Apple, after all
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Dmw017 said:
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
Click to expand...
Click to collapse
Same one.
Good question on whether it's putting out a full 1A. I guess what I do is check the charge times tomorrow with a few different 1A chargers to see if it measures up.
I use this for home:
http://www.amazon.com/Cellet-Charger-Retractable-Cable-myTouch/dp/B004XVM1T0
And this for the car:
http://www.amazon.com/Griffin-Powerjolt-Dual-Universal-Micro/dp/B0042B9U8Q
Both are dual-USB and put out 1amp. Charges my GNEX and iPhone 4 (work) at the same time without issues.
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I've read that the wall charger drops the battery down to 90ish % after it hits 100% and just goes between the two levels until you unplug your charger
While a USB charge is slower and charges your device up to a "fuller" charge
...I may be unfathomably wrong though
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
man that little Apple charger is so damn cute ... lol , ill probably end up buying it once the 1A volt charge is confirmed
edit: just bought it lol, oh well.. it will probably maybe more or less somewhat possibly work like it should at 1A :}
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I'm not an expert on the subject but I was under the impression that cycles (charge + discharge) were a bigger factor on battery life than something like this. The longer a current is running through the battery (charge or discharge) is detrimental to it's life span.
Leaving a laptop plugged in all the time ruins its battery is my source on this one. I would say it's because it has a constant charge running through the battery.
qreffie said:
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That takes a lot longer vs plugging it into the wall
rashad1 said:
That takes a lot longer vs plugging it into the wall
Click to expand...
Click to collapse
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
[hfm] said:
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
500mA is the max before the PC will disable the port. So your actually get less current.
There are some ports, depending on the motherboard that have a option of outputting more power for charging devices, and also have the port powered when the computer is off. But a normal usb 2.0 port is limited to 500mA max per spec... so a normal usb 2.0 port charging a phone is drawing less then 500mA, or it would get and over current condition and disable the port.
I design electronics and work with USB and batteries often, so let me clear some stuff up in no particular order:
- PC ports are limited to 500mA so will only ever output a max of 500mA
- You can use a wall charger that outputs 1000mA but on most devices the data pins on the micro USB need to be shorted to tell the phone it can try to draw more than 500mA. This is true for HTC devices for example. That means if you get a cheap charger that doesn't short the data pins, when you plug your standard micro-usb cable into it, it will still only charge your phone at 500mA.
- The charging controller is actually in the phone. It decides based on temperature (there's a sensor in the battery), current, voltage across the battery (current charge) and characteristics of the type of battery to figure out how much current to allow into the battery. Although its true that a 500mA charger may have different affects than 1000mA chargers, there usually is very little perceivable difference. Which is (slightly) better really depends on the charging controller and how it decides when to stop charging.
- When the battery is full, the phone continues to 'trickle charge' for a period of time. This isn't a bad thing. Overcharging a Lithium battery can be extremely dangerous, so normal charging occurs at a high speed and then slows down at a safe limit below the 'true' 100%. After that the phone continues to trickle charge to top up the battery. This is the reason you read in phone manuals you should charge the phone for 8 hours or overnight for its first charge.
- When charging at 500mA, the battery does not get as hot. This usually means you get closer to the true 100% before 'trickle charging' starts. With a 1000mA charge the battery heats up a lot more so charging may switch to trickle much sooner. Here's an example with made up figures.
Lets say you charge your battery with a 500mA charger, and it takes 2 hours. When the phone shows 100% it may actually be at 99%, and trickle charging. Leaving it for another 30 mins may take it to its full capacity.
Now, lets say you charge your battery with a 1000mA charger, and it takes 1 hour. When the phone shows 100% it may actually be at 98%, and trickle charging - It stopped sooner because the battery was hotter. Leaving it for another 30 mins may take it to full capacity.
Conclusion.. the 500mA charger took 2.5 hours, while the 1000mA charger took 1.5 hours. However if you unplugged both when the phone showed 100%, the 500mA charged battery may last longer, and so you think the 500mA somehow resulted in a more thorough charge!
At the end of the day, it doesn't matter which you use. the absolute charge cycles is what counts. Charge to 100%, then dont charge till its 0 for best battery care. Constantly plugging into a charger or dock all day on and off is bad. But having said that, your phone is there to be used, so a sensible balance of the two is the best bet.
Thank you so much for the detailed response, kam187. Would you recommend avoiding using a 5.1V charger, considering the phone came with a 5V charger?
Sent from my Galaxy Nexus using Tapatalk
I wouldn't use it. The 0.1v probably won't make any difference, but it may not be regulated. Chargers with these odd values sometimes don't have any regulator inside them. That could damage your phone as the voltage could shoot up and down as the current draw changes.
Just search amazon/ebay for any MicroUSB charger, and pick one from a reputable manufacturer like Motorola, HTC, Samsung etc. Since all phones now use MicroUSB, there's loads of these chargers around from previous phone models etc.
Here's just one I saw on amazon.com:
http://www.amazon.com/Samsung-Trave...E70I/ref=sr_1_3?ie=UTF8&qid=1322808220&sr=8-3
In the meantime I got inspired by some threads in which people claimed that 2A (amp) charger will make it faster to charge up my note then original 1A charger. I bought original Samsung 2A charger for Samsung galaxy tab and tried that out and I must say that during the first week or two the charging time decreased from around 2.5 - 3 hours into something around 1h 40-50 min.
Later on everything returned to standard 3 hours though, charging with 2A charger is almost identical to 1A charger so from my experience there is no added value with this approach (unless ICS will make a change, or some custom rom).
For anyone interested I enclosed picture where in the top row you may see charging with 1A charger after 1h50min, 2h40min (both just random pics), then when this app (https://market.android.com/details?id=net.whph.android.battery) said it is 100% and the last picture is when galaxy note (Android) system said it is 100% (green battery icon). In the bottom row there is the same scenario with 2A charger. I am on the stock rom 2.6.35.7-N7000XXKKA.
Im not sure but I think you need a kernel that allows more than 1A charging for the 2A charger to work.
EarlZ said:
Im not sure but I think you need a kernel that allows more than 1A charging for the 2A charger to work.
Click to expand...
Click to collapse
I guess so, what makes me slightly uncertain is that initially, charging time was around 2 hours ...
This is an interesting thread. I'd like to get more information about 2A chargers and whether they really make a difference.
Also I heard that when plugged to a TV (using the MHL cable) the phone may actually consume the battery more, even when plugged to the charger simultaneously. therefore if 2A chargers charge faster, it may also solve this problem.
Qvp said:
This is an interesting thread. I'd like to get more information about 2A chargers and whether they really make a difference.
Also I heard that when plugged to a TV (using the MHL cable) the phone may actually consume the battery more, even when plugged to the charger simultaneously. therefore if 2A chargers charge faster, it may also solve this problem.
Click to expand...
Click to collapse
I actually have both, micro USB to USB and micro USB to MHL cables. Wasn't able to test them for a longer time as they sometimes work and sometimes don't, especially mhl cable shows videos for like 30 seconds and then there is a lost signal message on my TV, then it wakes up, then it is gone again ... I could fiddle wit it, but will rather wait for ICS upgrade and then will return to it again.
Sent from my SGN
Iphone charger
I am using the iPhone charger. It is a 2A and so far I see an improvement in the battery life. With the original charger (and BB one) the battery reading was 2100mAh . Now is 2600mAh. I don't know why or how.
Also I see a sightly improvement in how the battery lasts for normal use. I get around 18hours
antonioeram said:
I am using the iPhone charger. It is a 2A and so far I see an improvement in the battery life. With the original charger (and BB one) the battery reading was 2100mAh . Now is 2600mAh. I don't know why or how.
Also I see a sightly improvement in how the battery lasts for normal use. I get around 18hours
Click to expand...
Click to collapse
the iPhone charger is 1a... Only the ipad charger is 2a
Sent from my Galaxy Nexus
What we need is someone with 2 notes with dead batteries and plug the original charger 1a on one and a 2a charger on the other and see which one gets fully charged first! Maybe its me but I can definitely see a difference between the original and the one I'm using (playbook charger 1.8a)
Sent from my Galaxy Nexus
big samm said:
What we need is someone with 2 notes with dead batteries and plug the original charger 1a on one and a 2a charger on the other and see which one gets fully charged first! Maybe its me but I can definitely see a difference between the original and the one I'm using (playbook charger 1.8a)
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I did it, and while not with 2 notes side by side, you can have a look at the pictures at the 1st post, the time and charging rate shows its pretty same on the stock rom whether you use 1A or 2A charger. (Although it was very different first one or two weeks, after that battery get used to 2A charger and charging is as slow as with 1A ...)
antonioeram said:
I am using the iPhone charger. It is a 2A and so far I see an improvement in the battery life. With the original charger (and BB one) the battery reading was 2100mAh . Now is 2600mAh. I don't know why or how.
Also I see a sightly improvement in how the battery lasts for normal use. I get around 18hours
Click to expand...
Click to collapse
How did you measure the current in mAh or what app did you use? Thanks.
My bad. I am using the iPad chargers. not iPhone . Those are 2A. To verify I am using battery pro monitor.
Here is a screenshot.
Sent from my GT-N7000 using XDA
SGN stock batt with ipad charger?
Hi, I see some of you are using 2A/ipad charger to charge you SGN. My question is, will there be any side effects on that could harm the stock batt in short or long run?
FYI, atm, I have an ipad charger for home and car and i intend to just use the same charger to charge all devices including my SGN. Im not looking for a fast charging option, but just a hassle free and conveniences.
I appreciate if you could give suggestion on a dual port charger (for home and car) where I can charge my devices simultaneously at one time.
No harm as long as the volatage output from your charger is 5v. This is what pushes the current to ur device. Higher it goes more it pushes.
However the current that the charger provides decides how fast it can charge. This will also depend on the device. If the device is manufactured to charge at 1 amp and u use a 2 amp charger then it will only use 1amp. If however u use a 750mah charger it can only use 750mah and charge slowly.
@Taptalk-GalaxyNote
Just wondering because I don't want to mess up my battery but would rather not have to buy another car charger if I don't have to.
fatmando2 said:
Just wondering because I don't want to mess up my battery but would rather not have to buy another car charger if I don't have to.
Click to expand...
Click to collapse
I would use it personally, but hopefully someone in the know can give a better answer.
I would compare the amp against the charger.
if it's less which most car chargers are, than you are ok..
only prob. you'd have is if a charger was putting out too much amp and toast the battery.
my 2 cents
take with grain of salt.
I believe it's actually the other way around. You can use a more powerful charger on a device that requires less, because the device will only draw the power it needs.
However don't use a charger that doesn't have enough power to charge the device, as the device could draw more power than the charger can provide and you risk catching the charger on fire.
This is how MacBook chargers work anyway. For example you can use an 85 watt charger to charge a 45 watt MacBook but you should not use a 45 watt charger to charge an 85 watt MacBook. (I have a few MacBooks that's why I used that reference).
I would assume cell phone chargers are the same concept.
Sent from my HTC One.
josh995 said:
I believe it's actually the other way around. You can use a more powerful charger on a device that requires less, because the device will only draw the power it needs.
However don't use a charger that doesn't have enough power to charge the device, as the device could draw more power than the charger can provide and you risk catching the charger on fire.
This is how MacBook chargers work anyway. For example you can use an 85 watt charger to charge a 45 watt MacBook but you should not use a 45 watt charger to charge an 85 watt MacBook. (I have a few MacBooks that's why I used that reference).
Click to expand...
Click to collapse
Yep. A device will only pull the current that it needs, so high-powered PSUs on low-current devices is fine and dandy. The only difference in electrical output that would fry the phone would be voltage, but since all USB chargers "are supposed to" put out 5VDC, you're safe.
As for using chargers with less than sufficient current, I can only speak to my experience. Personally, I've never had an issue charging any of my more beefy devices (Nexus 7, Galaxy Nexus, or HTC One) off of an old 500ma charger that came with my Galaxy S (or a car charger with that same output, for that matter). The devices just charge slower. The PSU gets noticeably warm, but I'd never say it got hot to the point where the threat of combustion was even remotely possible. And as for the comparison to the MacBook charger, you're talking a difference of 40 watts, whereas these little USB chargers have a difference of maybe 2.5 watts (from the 500ma to 1A models). Not a lot of power there, really.
That said, if I were to buy a new one, I'd definitely get a charger that has the output spec to match or exceed the device's OEM charger.
I have been using the Moto charger (both USB and car, borrowed from previous Razr Maxx) and they both work great. No issues.
Your phone will regulate the power so you will have nothing to worry about with almost any charger. I plug my phone into my tablets charger all the time which is 2.1a and have never had a problem. My HTC DNA was the only one that had an issue, it would say it's not the proper charger and it's enabling slow charging. Long story short, you should have no issues
hi. the battery charger that i got with my LG optimu G Pro is ****. its just now that i checked that i have been deceived
its chinese copy and its only 0.2A charger...
now i know the reason why my phone charges soooo slow...
anyways. i think Note 3 and iPad air charger are 2A and 2.4A. so can i use iPad or Note 3 charger to charge my phone? will that be ok?
any one here using that?
thanks
Use OEM LG charger with 1.2 output. I am using LG G2 OEM charger and it charges very fast! But not sure it's compatible completely
Sent from my LG E988
If youre tech savy you can make your own,you just need a switchmode 5v regulator (they usually put out up to 3 amps) and you put a resistor across the data pins (i think 100 ohm) and itll charge the phone as fast as it can safely charge. I made my own charger for the car and the phone gets fully charged in about an hour and a half. (With screen on and playing Bluetooth music). Other wise if you buy a charger, get as many amps as you can. Atleast 1.5+ . and to make the phone charge in AC mode if it only says USB you need a resistor across the data pins.
Thats funny... my G Pro came with a 1.8a LG charger, my G2 came with a 1.2a.
Yeah you'll be fine. The "extra" amperage in the charger is available capacity that your phone can draw from, it will regulate itself but that can also depend on the charger and how they pin the USB. Its different than if you have extra volts (like a 10vdc charger which would provide too high of a voltage and damage electronics). I usually charge all my phones at when I get home with my wife's iPad charger super fast. Likewise you can use your LG charger to charge the iPad but will be slower since it has less amp capacity to supply. Part of the reason they provide the bigger charger is to sustain battery level while using the device (It should be large enough that the battery doesn't drain while your using the device while plugged into the charger).
Most computer USB ports typically provide .5a of power and will be your slowest charging option, at best you get a newer laptop with "high capacity" ports and it provides only 1.0a.
I've been using an iPad 1st gen charger with GPro since day one, been working flawlessly for 4 months now. Charges fast.