Related
I have been running Xenon HD rom for some time now, but just recently, every time I try to update to the newest version when I reboot the system, it get stuck on the boot image. I end up pulling the battery and then a bunch of my apps are missing. I have never had this issue before. If I do a clean install, it loads just fine but I obviously have to reload everything. I would really like to not have to do a clean install every time when I am just updating the same rom. Any help would be greatly appreciated.
When you update a rom your boot screen will stay for a lounger amount of time because of the changes it made so wait a bit longer (5min) or try another recovery in my opinion TWRP is the best or maybe you could make a backup of your data before flashing it and the restore the data and there you go or you could also try using another rom if this problem stays and go back in 2 weeks to xenon hd and see if you have still the issue.
victor00100 said:
When you update a rom your boot screen will stay for a lounger amount of time because of the changes it made so wait a bit longer (5min) or try another recovery in my opinion TWRP is the best or maybe you could make a backup of your data before flashing it and the restore the data and there you go or you could also try using another rom if this problem stays and go back in 2 weeks to xenon hd and see if you have still the issue.
Click to expand...
Click to collapse
Yeah, I left my phone for 30min and it was still on the boot screen. Pardon my ignorance, but I am not familiar with TWRP. Right now I use ROM Manager. Is TWRP in place of ROM Manager? How do I get TWRP and load it?
Thanks for your help.
how old is the version you are running vs the age of the new one?
are they different android version?
Zepius said:
how old is the version you are running vs the age of the new one?
are they different android version?
Click to expand...
Click to collapse
Just their most recent release. I believe the previous version was 11.30.12 and I was updating to 12.8.12, so same version of Android.
you might have to wipe depending on what was changed between those 2 dates.
if you're having bootloop problems, you have to wipe.
rivman20 said:
Yeah, I left my phone for 30min and it was still on the boot screen. Pardon my ignorance, but I am not familiar with TWRP. Right now I use ROM Manager. Is TWRP in place of ROM Manager? How do I get TWRP and load it?
Thanks for your help.
Click to expand...
Click to collapse
TWRP is a recovery it is the best in my opinio because you don't have as many problems like you have with cwm you just flash TWRP after doing some research and then you flash and then you update your rom with you recovery
Any resolution to this problem? This has been reported in several threads (link 1, link 2, link 3, need I give more?)
I'm also experiencing the same problem. I installed Paranoid Android (per instructions here) and am now experiencing the same problem. After flashing, the phone continuously reboots. I am using an HTC One V (CDMA) from the US. I also flashed the JB 4.1.2 gapps with the ROM flash process.
When it boots, I receive two errors: "Unfortunately, android.process.acore has stopped working" and "Unfortunately, Contacts has stopped working". When I lock the screen, it reboots. When I try using it, it reboots after 30 seconds. If I just leave it alone, it reboots.
I have also tried several kernels with this same ROM (kernel that comes with the ROM, SuperSick [found here], and stock CM10) and they all just produced the same behavior.
I've looked all around. Some possibilities are: bad kernel, memory (RAM or otherwise) running out, bad install of ROM, or something no one has yet to define. I don't think its a bad kernel because this happens in 3 different ones. I don't think it's a memory issue because I lowered the CPU clockspeed and the phone has plenty of storage memory, and I've also flashed AOKP with the same results which rules out a bad ROM install.
I've wiped cache, system, data, and dalvik and followed all instructions as given to get a completely fresh installation. No avail. I realize that the One V isn't very popular, and there is only a limited amount of support for it but could anyone shed some light as to what the problem could be?? Perhaps some of the original devs who made the ROMs can help out us lowly fools who can't get it to work? I thank anyone in advance for being awesome and at least trying to help.
You may have to flash the old RUU. Look in the General subforum for a thread about phone rebooting after one minute.
sounds like you did the OTA update and have the new radio version, you need to RUU back to stock and dont get the OTA.
I'll try.
Thanks both of you! I will try flashing the RUU and I'll make sure to not install the OTA update. I'll post later with my results.
...
So... I flashed the RUU on the phone again. I again carefully followed instructions on how to flash ROMs (AOKP and Paranoid) and it simply doesn't boot. AOKP's ROM only starts up to a black screen. Paranoid boots to the boot screen animation and just hangs... I've used stock kernels, and tried the SuperSick kernel with both. No progress. Any other ideas?
Try the latest version of cm10 with the latest version super sick kennel. That's what I'm running. AOKP has a few versions that boot to a black screen. If you want AOKP use the latest stable version.
Awesome!
riggerman0421 said:
Try the latest version of cm10 with the latest version super sick kennel. That's what I'm running. AOKP has a few versions that boot to a black screen. If you want AOKP use the latest stable version.
Click to expand...
Click to collapse
Riggerman0421, thanks a ton for the suggestion!! It worked! Despite not being able to use the other roms, I think I can settle with using CM10.
htc one v
filoxo said:
Riggerman0421, thanks a ton for the suggestion!! It worked! Despite not being able to use the other roms, I think I can settle with using CM10.
Click to expand...
Click to collapse
Hey I am having the same problem as you with my htc one v. What did you do exactly to fix this?
lytesson said:
Hey I am having the same problem as you with my htc one v. What did you do exactly to fix this?
Click to expand...
Click to collapse
You have to RUU your device back to the original radio version; it was changed when you accepted the OTA update. That means that you're going to have to flash it to complete stock (no recovery, HTC Sense, booloader relocked, etc.) using the RUU. The forum I found that had all of the different RUUs was deleted unfortunately. You'll have to do careful research for the RUU for your specific device. I only know that Virgin Mobile in the U.S. uses the Sprint towers, so the RUU I used was titled "RUU_PRIMO_C_ICS_40A_Sprint_WWE_VM_1.08.652.6_Radio_1.00.00.0521_2_NV_VM_3.46_0503_PRL61008_release_262414_signed". Just a quick search on XDA and found this forum that has a download link to the RUU you would need for VM [CDMA] phone (read the comments); you can also look around yourself to make sure you have the right one.
You can find specific instructions on how to RUU your device at this awesome forum. It should only take, literally, 15-20 minutes.
After that is done, you will need to unlock your bootloader again and then you're ready to move on to bigger and better ROMs.
filoxo said:
You have to RUU your device back to the original radio version; it was changed when you accepted the OTA update. That means that you're going to have to flash it to complete stock (no recovery, HTC Sense, booloader relocked, etc.) using the RUU. The forum I found that had all of the different RUUs was deleted unfortunately. You'll have to do careful research for the RUU for your specific device. I only know that Virgin Mobile in the U.S. uses the Sprint towers, so the RUU I used was titled "RUU_PRIMO_C_ICS_40A_Sprint_WWE_VM_1.08.652.6_Radio_1.00.00.0521_2_NV_VM_3.46_0503_PRL61008_release_262414_signed". Just a quick search on XDA and found this forum that has a download link to the RUU you would need for VM [CDMA] phone (read the comments); you can also look around yourself to make sure you have the right one.
You can find specific instructions on how to RUU your device at this awesome forum. It should only take, literally, 15-20 minutes.
After that is done, you will need to unlock your bootloader again and then you're ready to move on to bigger and better ROMs.
Click to expand...
Click to collapse
So, this happend to my htc and I ruu'ed back to stock, after continunously trying to install roms with constant bootloops. I did the ota update again. So if I want to install a custom rom your saying DONT do the ota after ruu'ing then install one after rooting?
I've got a similar issue (virgin mobile HTC One V)
I currently have TWRP recovery installed, and I attempted to flash the jellybean CM10 as well as the AOKP rom, and I got as far as the unicorn and I actually manged to get the phone to boot to the main screen with all the icons, but it would constantly reboot after being on for maybe a minute
I tried flashing everything back to stock including restoring a backup I had previously taken with TWRP, but no luck
I also tried flashing the stock rom downloaded somewhere here on XDA and I even flashed the stock recovery, but all I got was constant rebooting.
it would get as far as the startup animation and then reboot indefinitely
I'm at a total loss here. I've seen a few links with some resources that look like they might have been helpful (like on this thread) but the links are dead, and I also read somewhere that HTC was putting the kibosh on a site that had some stock roms.
I'd prefer to get jellybean working on my phone, but ultimately, I just want a working phone.
I've followed the process of installing the rom - some instructions said to flash the boot img before flashing the rom, some say after
I've tried both methods
I went into recovery, mounted the usbmsd and copied the rom, and used recovery to install the rom after having cleared the cache, davlik cache and wiping the data (factory reset)
I also installed the gapps package after the rom, but I don't think that's critical to getting it to just boot.
The OTA update reboots were fixed in the latest 4.2 SickleKernels.
Sent from my One V using Tapatalk 2
bheadrick said:
I currently have TWRP recovery installed, and I attempted to flash the jellybean CM10 as well as the AOKP rom, and I got as far as the unicorn and I actually manged to get the phone to boot to the main screen with all the icons, but it would constantly reboot after being on for maybe a minute
I tried flashing everything back to stock including restoring a backup I had previously taken with TWRP, but no luck
I also tried flashing the stock rom downloaded somewhere here on XDA and I even flashed the stock recovery, but all I got was constant rebooting.
it would get as far as the startup animation and then reboot indefinitely
I'm at a total loss here. I've seen a few links with some resources that look like they might have been helpful (like on this thread) but the links are dead, and I also read somewhere that HTC was putting the kibosh on a site that had some stock roms.
I'd prefer to get jellybean working on my phone, but ultimately, I just want a working phone.
I've followed the process of installing the rom - some instructions said to flash the boot img before flashing the rom, some say after
I've tried both methods
I went into recovery, mounted the usbmsd and copied the rom, and used recovery to install the rom after having cleared the cache, davlik cache and wiping the data (factory reset)
I also installed the gapps package after the rom, but I don't think that's critical to getting it to just boot.
Click to expand...
Click to collapse
I think I'm having the same problem. The phone boots, gets as far as the "this build is for development purposes..." and then hangs for a few minutes and restarts, over and over. The flash with fastboot seemed to work fine and reported no errors.
EpicLordPhone said:
So, this happend to my htc and I ruu'ed back to stock, after continunously trying to install roms with constant bootloops. I did the ota update again. So if I want to install a custom rom your saying DONT do the ota after ruu'ing then install one after rooting?
Click to expand...
Click to collapse
Yes. Do NOT install the update if you want to flash another ROM onto your device. Use the RUU to get the device back to factory; this will restore the original radio version. Then go through the steps to unlock the bootloader, root, and flash your ROM as desired. There are other forums which explain the mentioned processes better.
BeyondExistence says that this is fixed with a "4.2 SickleKernel", but as far as I'm aware there are no JB 4.2 ROMs for the HTC One V. Maybe a little more information would be in order?
Bheadrick:
I'm not quite sure what you mean when you say you flashed the stock recovery. The One V doesn't have a recovery when everything is stock.
You will have to RUU your device back (have you read any of the posts in this and other forums??). The process will reinstall the stock rom, relock your bootloader, remove the recovery, etc.
I recommend that you use Paranoid android's rom with the latest SuperSick kernel. Its been my favorite and most stable build I've used.
Sent from my Nexus 7 using xda app-developers app
So I found what BeyondExistence might have been talking about (for those of you who care/are currently having the bootloop problem and would rather go with this route). Its called RhythmicRom. This is a 4.2.2 ROM and it has some cool things for users switching from Sense to a more-pure Android [Link here]. Its based off of CM10.1 for the One V and it includes the BeatsAudio app (which most ROMs don't, as far as I know).
The reason I think that this is worth mentioning is because whoever runs into this bootlooping problem can simply SKIP the RUU process and just move onto this ROM. Hit thanks if this helped!
Newest OTA update.
As some of you may have seen, there's an even newer OTA Update available through the stock ROM. As always, this will cause problems when you try to flash a different kernel, resulting in bootlooping (can anyone who has done the newest update confirm?). Anyway, I've also read that this update also updates your hboot (which, since I haven't and will not apply the update, don't know why it would impede you from flashing any other ROM/kernel but it does) and radio version.
I've looked for additional ROMs who try and make their builds compatible, but so far only RhythmicRom has done anything worthwhile (in my opinion). His latest v 1.3 build will be out soon, and I highly recommend it.
If you flashed both OTA updates, then please be sure to include that when making any post.
filoxo said:
As some of you may have seen, there's an even newer OTA Update available through the stock ROM. As always, this will cause problems when you try to flash a different kernel, resulting in bootlooping (can anyone who has done the newest update confirm?). Anyway, I've also read that this update also updates your hboot (which, since I haven't and will not apply the update, don't know why it would impede you from flashing any other ROM/kernel but it does) and radio version.
I've looked for additional ROMs who try and make their builds compatible, but so far only RhythmicRom has done anything worthwhile (in my opinion). His latest v 1.3 build will be out soon, and I highly recommend it.
If you flashed both OTA updates, then please be sure to include that when making any post.
Click to expand...
Click to collapse
I got my One V at the end of December and did the OTA update at the beginning of April. Last week, I decided to try messing with loading some different ROMs and have encountered all of the problems you've mentioned (e.g., boot-looping, inability to RUU back to stock). I have successfully gotten RhythmicRom to load using this OTA_support.zip (which has been incorporated into the regular release since I flashed it). I have also gotten the most recent version of PACman v22.1 to run (using the same kernel as RhythmicRom) without boot-looping, but the performance hasn't been great (browser crashes frequently and it seems like the launcher has to restart a lot). User demi_fiend has said that the PACman ROM will work using the CodefireX kernel from user BeyondExistence.
I had also tried to revert back to my stock CWM recovery, but it had the boot-loop problem too. However, demi_fiend has also informed me that you can revert to a stock backup by using the boot.img file that is located in the backup folder. I haven't had the chance to verify this, but I wouldn't be surprised if it were true.
It's a bit of a pickle being unable to revert back to previous radio versions, but there is hope that some of the devs will incorporate this issue into their new builds.
tallnproud said:
I got my One V at the end of December and did the OTA update at the beginning of April. Last week, I decided to try messing with loading some different ROMs and have encountered all of the problems you've mentioned (e.g., boot-looping, inability to RUU back to stock). I have successfully gotten RhythmicRom to load using this OTA_support.zip (which has been incorporated into the regular release since I flashed it). I have also gotten the most recent version of PACman v22.1 to run (using the same kernel as RhythmicRom) without boot-looping, but the performance hasn't been great (browser crashes frequently and it seems like the launcher has to restart a lot). User demi_fiend has said that the PACman ROM will work using the CodefireX kernel from user BeyondExistence.
I had also tried to revert back to my stock CWM recovery, but it had the boot-loop problem too. However, demi_fiend has also informed me that you can revert to a stock backup by using the boot.img file that is located in the backup folder. I haven't had the chance to verify this, but I wouldn't be surprised if it were true.
It's a bit of a pickle being unable to revert back to previous radio versions, but there is hope that some of the devs will incorporate this issue into their new builds.
Click to expand...
Click to collapse
Did you flash stock recovery and lock bootloader before running RUU?
Lsesp said:
Did you flash stock recovery and lock bootloader before running RUU?
Click to expand...
Click to collapse
I had flashed my stock recovery (although it was still boot-looping), and I did re-lock the bootloader before running the RUU.
I used the instructions found here.
Hi,
I have a GSM Galaxy Nexus, I bought it in November 2013. Here is a sequence of events I performed on my galaxy nexus:
1) Used Galaxy Nexus Toolkit V9.1.0 to install Android 4.1.2 (Build JZO54K)
2) Rooted and unlocked my phone (through a friend)
3) Installed Cyanogenmod 10.0 nightly in start of December using TWRP 2.2.2.0.
4) When 4.2.1 ROMs came out tried installing it using TWRP old version but then got to know updated version 2.3.* can directly install 4.1.2 ROM without using Galaxy Nexus Toolkit V10.0 so went for it. Meanwhile I used TWRP backup feature to save my Cyanogenmod and I recovered it later on when I didnt like 4.2.1 ROM.
5) Today, I decided to try 10.1 cyanogenmod a try. Downloaded yesterday's nightly and though it would be good to wipe cache/delvik cache and without even wondering what I am doing wiped internal storage and factory settings as well. After this I installed new nightly but when I restarted my phone the cyanogenmod circle just kept on moving for more than 5 minutes but the ROM didnt load. I knew I was in trouble.
6) I tried installing a rom but couldnt after which I had to used Galaxy Nexus Toolkit V9.1.0 to Flash Google Factory Stock ROM of 4.1.2.
7) I saved my TWRP rom recovery folder to the internal memory (tried putting them in TWRP folder or just main folder but it won't show up when I press recover in TWRP. I tried TWRP 2.2.2.0, 2.3.2.0 and even 2.4.1.0 but none would load the restoring files.
8) I treid the above TWRPs to install the new nightly as well but again after installation, it would just keep circling and the ROM wont load.
PLEASE HELP ME ......
Currently I have updated tp 4.2.2 Factory ROM as I got it as an update while I was on 4.1.2 factory rom.
Can you tell me how to bring the phone back to normal? I think the synchronization of root+unlock+TWRP has been broken.
Thanks.
There is no "synchronization" to break.
Follow one of the stickies in this section on how to properly root your device with adb and fastboot then follow the directions.
Then if possible move the contents of the old TWRP folder into the new one.
Toolkits are seriously the worst thing to happen to XDA. Nobody bothers to learn anything if there's a tool to do it for them then they wind up helpless if something goes wrong.
063_XOBX said:
There is no "synchronization" to break.
Follow one of the stickies in this section on how to properly root your device with adb and fastboot then follow the directions.
Then if possible move the contents of the old TWRP folder into the new one.
Toolkits are seriously the worst thing to happen to XDA. Nobody bothers to learn anything if there's a tool to do it for them then they wind up helpless if something goes wrong.
Click to expand...
Click to collapse
Can you let me know a useful like for that? I am thinking of installing Galaxy_Nexus_ToolKit_v10.1.0.exe and take a fresh start.
abulkhairi said:
Can you let me know a useful like for that? I am thinking of installing Galaxy_Nexus_ToolKit_v10.1.0.exe and take a fresh start.
Click to expand...
Click to collapse
I just explained what you should do. If you're going to insist on using a toolkit then I can't help you any further.
So, first off, just wanna say that I have a RIDICULOUS amount of experience with flashing roms. Literally over 100 different devices and 1000s of different flashes of my own devices on top of it. Quite familiar with this S2 as well and have customized them to all sorts of extents, but this one has me baffled. This phone refuses to run 4.2.2/4.3/4.4.x roms. Using the most up to date radio and the suggested TWRP (2.6.1.0) as well as CWM 6.0.44 and the newer TWRP: 2.6.3.0. Every time the phone will get to the set up screen, refreeze and boot. No issues running stock or stock based 4.1.2 roms. I've tried changing recoveries, wiping everything (/system, /data, /caches) repeatedly, Odin back to stock and redoing everything, switching kernels, wiping caches before rebooting and leaving it be, changing batteries, etc but nothing has worked. So far I've tried BlackLiquid 2.92 (4.2.2 stable), Awesome Audio rom (4.3), official CM11 (whatever the last build up was last night), and BeanStalk 4.4.2 (12/16) and all behave exactly the same - freeze on start up and reboot. This doesn't seem to be much of a widespread issue obviously, so just baffled and getting a bit frustrated as this should have been a 20 minute process that has turned into a few hours already. Since USB Debugging isn't on by default on newer roms, how would I even do a logcat to see if there is anything meaningful there? Any ideas?
Update: I have another S2. Performed same steps, same TWRP, same radio and rom, on same external SD card and that one booted right up like normal confirming that it is the phone itself, but what causes that?? Corrupted partitions?
I have the same problem, just format your internal and external sd card with just ROM file on your storage then try to install, than please inform me
Sent from my SGH-T989 using XDA Premium 4 mobile app
iamdofus said:
I have the same problem, just format your internal and external sd card with just ROM file on your storage then try to install, than please inform me
Sent from my SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope. No luck there (only tried Beanstalk so far, but exact same issue). Thanks for the suggestion though! Only using internal storage, no SD card, though thinking I might try that next...
Edit: Just to be thorough, I formatted internal storage via TWRP and my computer then readded the files and just tried to boot rom only and freezes before I can do anything.
Do you by chance have a refurbished s2?
The screen has been replaced by a friend of mine and he managed to mess up the soft keys with it, but everything else functions. That's actually why he sent it to me, so I could hook him up with Pie and all that kind of thing so the soft keys aren't an issue. What's your thoughts on the refurb side of it?
es0tericcha0s said:
The screen has been replaced by a friend of mine and he managed to mess up the soft keys with it, but everything else functions. That's actually why he sent it to me, so I could hook him up with Pie and all that kind of thing so the soft keys aren't an issue. What's your thoughts on the refurb side of it?
Click to expand...
Click to collapse
OK thanks for reply, I have one more solution give me. Some time I will give try that it worked for me.
Sent from my SGH-T989 using XDA Premium 4 mobile app
es0tericcha0s said:
Nope. No luck there (only tried Beanstalk so far, but exact same issue). Thanks for the suggestion though! Only using internal storage, no SD card, though thinking I might try that next...
Edit: Just to be thorough, I formatted internal storage via TWRP and my computer then readded the files and just tried to boot rom only and freezes before I can do anything.
Click to expand...
Click to collapse
ok lets stat it with this
1) download both the scripts of infamous wipe cache and infamous super wipe.
2) format your both SD card with PC (FAT32)
2) put both these wipe files and and your rom file ( i prefer try slimbean rom first)
3) Now in twrp 2.6.0.0- follow the steps
i) format your phone with twrp options
ii) again format your phone with infamous super file. (by going in to INSTALL ZIP file option in TWRP)
iii) than format with infamouse cache file (by going in to INSTALL ZIP file option in TWRP)
iv) install your rom and compatiable GAPPS zip file.
v) after installing or somewhere between procedure if twrp says something about supersu birnaries are not correct than click on DO . NOT FIX
vi) again format infamouse cache wipe.
vii) now FINALLY reboot the rom.
it should work, and it worked for me. if u sucessfully run the rom than you can eailsy run all the AOSP roms in this forum. Again If you try this please do tell me what happend.
Followed to a "T" and still in the same boat - freezes after bootup. I used those same steps before with another darkside wipe script (maybe older?) but yea, have already been down that road. I did downgrade to 2.6.0.0 and used Slim 4.3 because 4.4 is supposed to use the newer TWRP, just to be certain, but GRRR. I guess we're just gonna have to settle for a 4.1.2 rom and call it a day. :/
So here are the log output from the wipes:
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.SUPER.WIPE_recovery.log
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.CACHE.WIPE_recovery.log
I see some stuff at the bottom of those that might indicate something weird, but I am not adept at interpreting these, so just wondering if someone could point me to the right direction about the repair checks and what not listed on these. Thanks!
Edit 2: I did get a AOSP based 4.1.2 rom to boot with no problems! wtf... LoL
Last Edit:
Problem solved! I used basically the same steps I had been doing but once the AOSP 4.1.2 rom booted then now everything works like it should again. Have loaded a 4.3 and 4.4 rom successfully. Thanks for the help!
es0tericcha0s said:
So, first off, just wanna say that I have a RIDICULOUS amount of experience with flashing roms. Literally over 100 different devices and 1000s of different flashes of my own devices on top of it. Quite familiar with this S2 as well and have customized them to all sorts of extents, but this one has me baffled. This phone refuses to run 4.2.2/4.3/4.4.x roms. Using the most up to date radio and the suggested TWRP (2.6.1.0) as well as CWM 6.0.44 and the newer TWRP: 2.6.3.0. Every time the phone will get to the set up screen, refreeze and boot. No issues running stock or stock based 4.1.2 roms. I've tried changing recoveries, wiping everything (/system, /data, /caches) repeatedly, Odin back to stock and redoing everything, switching kernels, wiping caches before rebooting and leaving it be, changing batteries, etc but nothing has worked. So far I've tried BlackLiquid 2.92 (4.2.2 stable), Awesome Audio rom (4.3), official CM11 (whatever the last build up was last night), and BeanStalk 4.4.2 (12/16) and all behave exactly the same - freeze on start up and reboot. This doesn't seem to be much of a widespread issue obviously, so just baffled and getting a bit frustrated as this should have been a 20 minute process that has turned into a few hours already. Since USB Debugging isn't on by default on newer roms, how would I even do a logcat to see if there is anything meaningful there? Any ideas?
Update: I have another S2. Performed same steps, same TWRP, same radio and rom, on same external SD card and that one booted right up like normal confirming that it is the phone itself, but what causes that?? Corrupted partitions?
Click to expand...
Click to collapse
Interesting, so you're saying it's phone specific?
That begs to ask other questions now:
1. Where did this phone come from? is it a Tmobile version (SGH-T989) or AT&T (i-1900)?
2. You mentioned you got it from a friend; did it come rooted? unlocked? Or did you have to do that process yourself?
UltimaniumX said:
Interesting, so you're saying it's phone specific?
That begs to ask other questions now:
1. Where did this phone come from? is it a Tmobile version (SGH-T989) or AT&T (i-1900)?
2. You mentioned you got it from a friend; did it come rooted? unlocked? Or did you have to do that process yourself?
Click to expand...
Click to collapse
Yep, very much phone specific. Used same recovery, same rom zip and gapps off the same external SD card, to be certain. That one updated just like every other S2 I've done. And it's the Tmo version. The At&t models are i777 S2 or i727 S2 Skyrocket. The i9100 is international and has a physical home button. But the phone was not modified at all. No root, custom recovery, etc. I was only able to resolve it by first starting with an AOSP 4.1.2 rom and working my way up to 4.4. One of the weirder issues I've come across.
es0tericcha0s said:
Followed to a "T" and still in the same boat - freezes after bootup. I used those same steps before with another darkside wipe script (maybe older?) but yea, have already been down that road. I did downgrade to 2.6.0.0 and used Slim 4.3 because 4.4 is supposed to use the newer TWRP, just to be certain, but GRRR. I guess we're just gonna have to settle for a 4.1.2 rom and call it a day. :/
So here are the log output from the wipes:
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.SUPER.WIPE_recovery.log
https://dl.dropboxusercontent.com/u/9903887/INFAMOUS.CACHE.WIPE_recovery.log
I see some stuff at the bottom of those that might indicate something weird, but I am not adept at interpreting these, so just wondering if someone could point me to the right direction about the repair checks and what not listed on these. Thanks!
Edit 2: I did get a AOSP based 4.1.2 rom to boot with no problems! wtf... LoL
Last Edit:
Problem solved! I used basically the same steps I had been doing but once the AOSP 4.1.2 rom booted then now everything works like it should again. Have loaded a 4.3 and 4.4 rom successfully. Thanks for the help!
Click to expand...
Click to collapse
What did you exactly do? I flashed a 4.1.2 and then flashed a 4.3 based ROM and it didn't work. What recovery version did you use to flash the 4.3 ROM?
tpag02 said:
What did you exactly do? I flashed a 4.1.2 and then flashed a 4.3 based ROM and it didn't work. What recovery version did you use to flash the 4.3 ROM?
Click to expand...
Click to collapse
Sorry, I don't pay attention to the notifications on XDA very often. I don't usually browse the S2 forums unless needed because I have an N5, but anyway... The 4.1.2 rom you used, was it TW or AOSP type? I used 2.6.0 to wipe everything, then used cache and superwipe zips then 4.1.2 AOSP type rom then cache wipe zip again then after that booted, I was able to go back to 2.6.1 and flash a 4.3 via wiping, wipe zips, installing rom then cache wipe again. After that, repeated with a KK rom and now it loads roms just like it should. If you want more precise help, feel free to hit me up on Hangouts with my username: es0tericcha0s. Good luck! I know how frustrating it can be when it gets a little out of whack like this...
I'm in the same boat
Same here. I just bought a galaxy s2 from my friend (tmobile version) and I too get stuck in a bootloop no matter what rom I use. It boots up freezes then reboots 7 keeps doing that endelessly. I've even wiped using twrp & darkside then reflashed the stock rom in odin, but no luck. strangely it only happens on the cellular network, otherwise it works fine on wifi. But when I turn off the wifi and go to the cellular network I can't even turn on the wifi anymore and still stuck in this boot loop It's wierd and frustrating.
DennyTek said:
Same here. I just bought a galaxy s2 from my friend (tmobile version) and I too get stuck in a bootloop no matter what rom I use. It boots up freezes then reboots 7 keeps doing that endelessly. I've even wiped using twrp & darkside then reflashed the stock rom in odin, but no luck. strangely it only happens on the cellular network, otherwise it works fine on wifi. But when I turn off the wifi and go to the cellular network I can't even turn on the wifi anymore and still stuck in this boot loop It's wierd and frustrating.
Click to expand...
Click to collapse
Hmm. That's interesting... This is happening on the stock rom - where you turn on cellular data and it reboots? Definitely a different issue than the one I was having. Which stock rom were you flashing via Odin? Have you tried other versions of the stock rom and had the same problem?
TMO 4.1.2
es0tericcha0s said:
Hmm. That's interesting... This is happening on the stock rom - where you turn on cellular data and it reboots? Definitely a different issue than the one I was having. Which stock rom were you flashing via Odin? Have you tried other versions of the stock rom and had the same problem?
Click to expand...
Click to collapse
This was happening on any rom I used (Cm 10.2 stable, Cm 11 nightly, AOKP & Super Nexus 3.0 which is Android 4.3) I can't really speak for the stock rom (tmo 4.1.2) since I've never used it for more that 5 minutes, sigh but I'll try it and see if it gives me the same problem :/
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
yep
wikitiki said:
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
ya, well at least I am anyways
wikitiki said:
Are you guys flashing gapps if the ROM you're installing doesn't have it?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
I had tried with and without and did not make any difference.
DennyTek said:
This was happening on any rom I used (Cm 10.2 stable, Cm 11 nightly, AOKP & Super Nexus 3.0 which is Android 4.3) I can't really speak for the stock rom (tmo 4.1.2) since I've never used it for more that 5 minutes, sigh but I'll try it and see if it gives me the same problem :/
Click to expand...
Click to collapse
I just started working on a VZW S3 on T-Mobile service that has this issue. Happens on stock VZW 4.1.2, stock T-Mobile 4.1.2 rom, custom 4.1.2 T-Mobile rom, and stable CM 10.2. Weirdest thing... full wipes including /system inbetween each flash. Changed the modem too. Nothing helps. Pretty sure it's a bad board at this stage.
Cool beans, 0! Having this exact problem, will try your method for my s2, btw which aosp 4.1.2 did u use? Can I get a link? Thanks been having the problem for a few months now and just gave up haha, been super thirsty for that beanstalk kk build
One last thing can u also provide a link to the 4.3 that u used? I really want it to work and want to follow what u did to the , megabyte
Hi All
I've been having such trouble flashing custom ROMs on my Samsung Galaxy Tab Pro 10.1 WiFi SM-T520. I was sucessfully able to flash TWRP 2.8.7 via odin on the device. However, I've tried several ROMs (CM11, 12, 12.1, Unofficial Liquidsmooth) each with their own issues but whichever is able to be flashed always ends up with random startup reboots. I cannot for the life of me figure out why or what is the reason. If I flash back to stock Samsung firmware, everything is fine, works perfectly but no custom firmware.
CM12.1 out right hangs during install in TWRP. The only way I was able to install it is via Cyanogen Recovery which I flashed via odin then attempted to install the rom but even still ends up in random reboots during first bootup and a few times during optimizing apps.
Just a note, I have been doing full wipes (cache, data, system) prior to flashing the ROMs. I don't know what else to do. CM12.1 works really great and smooth but cannot use it because of these random reboots. Can anyone shed some light so I can have a successful flash?
ALSO, I would like to note one suspicion I have and that is my tablet came preloaded with KOT49H.T520UEUAOD1 (T520UEUAOD1_T520XARAOD1_XAR) Samsung Firmware Build. I wonder if perhaps something with this latest build shipped is causing my troubles but am not sure.
Thanks in advanced!
Try booting back to recovery immediatly after new rom flash and perform factory reset and it ahould fix it in most cases.
Sent from my LG-D800 using XDA Free mobile app
I tried the factory reset suggestion but unfortunately did not make a difference.
Are you restoring any backups after flashing? I have been having the same issue, since flashing back to stock. I didn't like stock so I went back to CWM 12.1, which worked flawlessly before. now having random reboots, and the longer I leave it on my system, it's takes longer and longer to wake each time. The only difference between now and the first time I flashed, is, this time I restored a backup! I to, wipe before and after flashing!
Mossey said:
Are you restoring any backups after flashing? I have been having the same issue, since flashing back to stock. I didn't like stock so I went back to CWM 12.1, which worked flawlessly before. now having random reboots, and the longer I leave it on my system, it's takes longer and longer to wake each time. The only difference between now and the first time I flashed, is, this time I restored a backup! I to, wipe before and after flashing!
Click to expand...
Click to collapse
No backup/restores involved for me. Are you still experiencing this issue with CM12.1 or was restoring the backup the problem in your situation?
I am wondering if perhaps the bootloader version that is based off of the latest official stock ROM that was released in April/May 2015 has something to do with my issues. Is there anyone that was on the latest stock Samsung ROM that has been able to successfully flash a custom ROM and use it in a stable way (short of minor CM bugs)?