Develop Bugs

|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |

|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here.
If you have not updated to 4.4, go here.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Edit:
Here is some potentially useful info for root method #1 from ansonantonym.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery then flash SuperSu and the Knox Remover
4) Reboot
5) Download SuperSu from the Play Store
6) Open SuperSu and update the binary when prompted
7) Reboot
8) Enjoy rooted 4.3/4/4
Downloads:
Odin
TWRP (Odin flashable tar)
SuperSu (v1.65)
SuperSu (v2.01)
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
Please be sure to thank Chainfire, Dees_Troy, and Kaito95.
*****

Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

jeremyds45 said:
Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.

upndwn4par said:
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.
Click to expand...
Click to collapse
Ah it is so nice to have root again... Thank you so much for putting up with a noob.
Crazy events of a noob that lead me to root
Installed ota 4.3
Tried to root and install superuser by odin and then custom recovery to flash
Root didn't happen because of knox
Could only get to CWM custom recovery if it was right after odin and battery pull?...
Flashed the script to remove knox, which did remove knox
Tried the same root method as above and no root access
Tried supersu and then updating in play with no success
Changed security update settings etc nothing
Reset delvik, cache, permissions, etc nothing
Different root method and files for odin, and custom recovery stuck
Used files from this thread, went into custom recovery and flashed supersu
Installed supersu from play store...
Updated the binary using custom recovery
Rebooted...
ROOT access, all root applications work fine and root sticks even after reboots
I never messed with cf auto root method
THANK you guys for your time effort and sharing, helps noobs out like me a lot!

Sweet! I've missed root since I upgraded using the OTA file you provided. Looking forward to much other great things coming from you

Thank You
upndwn4par said:
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here. Make sure you understand the risks and uncertainties described in the OP.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery and flash SuperSu.
4) Flash the Knox Remover
5) Reboot
6) Download SuperSu from the Play Store
7) Update the binary when prompted
8) Reboot
8) Enjoy 4.3
Downloads:
Odin
TWRP (Odin flashable tar)
UpdateSuperSu
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
*****
Click to expand...
Click to collapse
Method two absolutely worked. Thank you so much. I was scared to flash TWRP but knowing you did it gave me the courage. Have full root and happy

questions about this root
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.

THANKS!!!! your a lifesaver didn't know how much longer i could take without root

Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??

bkong said:
Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??
Click to expand...
Click to collapse
use the TWRP method worked perfected for me

Thanks

PimpMyPC said:
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.
Click to expand...
Click to collapse
The second method worked great. I believe (and the way that worked for me) that you use your custom recovery to flash the knox script, not using Odin and pda. I don't think it removed anything other than knox, there is a different script for removing knox and att bloatware. Should still be able to factory reset... But can't guarantee that.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Root & Knox
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????

tailgunner9 said:
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????
Click to expand...
Click to collapse
Those settings are just for granting device administrator privileges. If unchecked, Knox is still doing it's thing, just not at an administrative level.
Yes, it is safe to try and root.
I have Android Device Manager as admin. That way if I ever lose my device I can just log in to the Play Store and locate and / or wipe the device.

To do this just flash the recovery.img file using odin and clicking the pda button correct?

Is there a way to freeze Knox instead of deleting it in the event I would want to go back to full stock?

After you are rooted, use an app like Titanium Backup(pro) or My Backup pro. Both will freeze it.

Root
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks

tailgunner9 said:
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks
Click to expand...
Click to collapse
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.

indymx said:
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.
Click to expand...
Click to collapse
Thanks indymx, may get the nerve up to try it on my AT&T S3. Let me know if you run into any problems. Guess Rom Manager and other programs that require Root are working Ok and you have rebooted few times to be sure it keeps Root?? Have Happy Thanksgiving.

[Q] rooting SGH-T999 with Skipsoft

I've read as much as I can and I just need a little more help. I want to be able to root my T-Mobile Galaxy S3, SGH-T999.
1. Is there any other way to pull files from /data/data without rooting?
2. Can I just do a simple root and then later root with CWM or TWRP using another option?
3. I thought rooted was rooted, what is the need for "insecure boot"? Is that the only way to get a file image backup of my partitions?
4. None of the rooting options in the Skipsoft Android Toolkit wipe the device, correct?
5. Is the only way to be able to "recover" back to stock by installing a "custom recovery"?
All of the options include "custom recovery". What if I just want to root the device and install a custom recovery later? Or it custom recovery included in all the options so I can get back to stock if I mess up? Thanks!

I am not sure why you'd need to go to such extent.
By your question on Insecure Kernel, I assume, you have Stock 4.3 update. If so, please flash SuperSU Zip via Custom Recovery. You can Also flash Root66 of 4.3 (UVUEMJC ) to get Root as well. None of these methods are destructive and make you loose your data.
As to your other questions, /data/data should be accessible read only to Good File explorers such as ES File Explorer. My Backup Pro should be able to backup those files too. Insecure boot is needed to root as SELINUX Enforcing will not let you have Stable Root. Best Flash ATT Insecure Kernel Posted on this sub forum. I don't understand what you mean by "Recover to Stock".

can't do anything without root
I tried ES File explorer and 2 others, they show /data/data as blank. Most everywhere I've looked says you have to have root

In that case please post your Current Android version and what you see under Baseband. What step we take next depends on this information.

rooting galaxy
perseus71 said:
in that case please post your current android version and what you see under baseband. What step we take next depends on this information.
Click to expand...
Click to collapse
4.3, t999uvuenc2

fdecker said:
4.3, t999uvuenc2
Click to expand...
Click to collapse
Root 66 Will not work you will need Auto Root, CWM/TWRP and Update SuperSU for a complete root.
CF-Auto-Root-d2tmo-d2tmo-sght999.tar
openrecovery-twrp-2.7.0.0-d2tmo
UPDATE-SuperSU-v1.93
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0
For a suceed root and Knox remove.

Thanks!
jmberumenb said:
Root 66 Will not work you will need Auto Root, CWM/TWRP and Update SuperSU for a complete root.
CF-Auto-Root-d2tmo-d2tmo-sght999.tar
openrecovery-twrp-2.7.0.0-d2tmo
UPDATE-SuperSU-v1.93
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0
For a suceed root and Knox remove.
Click to expand...
Click to collapse
Thanks, this is great. I rooted the same model phone that was on OS 4.1.2 by uploading root66 with Odin and it worked in one step. I see now that root66 is not the way to go on the 4.3 phone just yet. I will follow your tips. I see too that I have to get rid of Knox and make sure the recovery partition does not get reset. Think I should put busybox out there too, or with TWRP and SuperSU do I have all I need?
Thank you very much for your help!

fdecker said:
Thanks, this is great. I rooted the same model phone that was on OS 4.1.2 by uploading root66 with Odin and it worked in one step. I see now that root66 is not the way to go on the 4.3 phone just yet. I will follow your tips. I see too that I have to get rid of Knox and make sure the recovery partition does not get reset. Think I should put busybox out there too, or with TWRP and SuperSU do I have all I need?
Thank you very much for your help!
Click to expand...
Click to collapse
I used the TWRP and SuperSU method no problems so far.

TWRP and SuperSU
jmberumenb said:
I used the TWRP and SuperSU method no problems so far.
Click to expand...
Click to collapse
I'll give that a try then.

busybox?
One last question: Would you load busybox as well?

fdecker said:
One last question: Would you load busybox as well?
Click to expand...
Click to collapse
Nah I wouldn't unless its required by your Rom or something.

4.4. KitKat for Wifi Note 10.1 2014 P600 Q&A

Hi guys I have some questions about the new Firmware and KitKat in general and you may have answers I'll try to update first post with your answers!
-Will I loose root when I flash through Odin? --> Yes
-Is the new firmware rootable, or is there a way to keep root when I upgrade from rooted 4.3?
-->For upgrade yes: If you are rooted on 4.3 you can restore root by flashing a custom recovery and flash superSU manually.
-->chainfire autoroot works but you need to update the superSU app through play store after flashing.
-Will KitKat restrict access to my SD card? -->Yes but fixable through an app or editing a file (needs root), there is already a thread about that.
-Can I still use flash with KitKat? How?
-->Yes, there is a hacked version see 2nd post for link.
-How is the touchscreen driver? Is the stuttering fixed? Do touch and hold actions still drop after ~23sec?
-->Pretty much fixed. To about the same state as the improved Kernel we had a while ago.
-Are there any apps that are not working (root apps too)?
-Gesture Controls? --> works
-Xposed framework app settings? -->works
-Is Hancom Office included or does it still work? --> not included but does still work.
Thats about what I can think of a the moment.

Hi,
If you are already rooted then all you have to do is re install TWRP and then flash SU zip then you have root.
For flash player, download hacked version here, it works I tested it on new software :
http://forum.xda-developers.com/go...e-how-to-play-flash-video-android-4-t2548001
Also, xposed works. Tested it on new software
Sent from my Note 2014 using Tapatalk

Chainfire's Auto Root does work, once you flash it thru odin and reboot, go to the Play store and update the app.
- Please update OP

Here's a question: I'm already rooted. Is flashing the stock KitKat image via Odin and rerooting the only way to upgrade?

starfall42 said:
Here's a question: I'm already rooted. Is flashing the stock KitKat image via Odin and rerooting the only way to upgrade?
Click to expand...
Click to collapse
If you are already rooted, I assume you have TWRP too. Just download this KitKat rom, full wipe and install.
http://forum.xda-developers.com/show....php?t=2720631

Itchiee said:
Chainfire's Auto Root does work, once you flash it thru odin and reboot, go to the Play store and update the app.
- Please update OP
Click to expand...
Click to collapse
Not for me I flashed a stock 4.4 kit kat on my tablet coming from root 4.3. I then flashed chainfire autoroot thru odin on the 4.4 and the superuser there only problem is it displays this ' There is no SU binary installed, and SuperSU cannot install this is a problem! I formatted my 4.3 before flashing it maybe thats why?

itachi30s said:
Not for me I flashed a stock 4.4 kit kat on my tablet coming from root 4.3. I then flashed chainfire autoroot thru odin on the 4.4 and the superuser there only problem is it displays this ' There is no SU binary installed, and SuperSU cannot install this is a problem! I formatted my 4.3 before flashing it maybe thats why?
Click to expand...
Click to collapse
Not sure... I installed KK on the tablet via Odin, then rebooted and setup, then rebooted into download mode and flashed auto root thru Odin.
Upon reboot I got an error selecting SuperSU, but once I updated it thru the Play Store its been fine.
Using ES Explorer I removed the items I don't need and removed all of the Knox stuff.
There are a few of us this worked for so I don't know what went wrong for you.
If you don't succeed then try again, and again, and again....Good luck.

Do I have to update to kitkat bootloader?

gcrutchr said:
Do I have to update to kitkat bootloader?
Click to expand...
Click to collapse
Not needed. The bootloader is same for 4.3 and 4.4

Itchiee said:
Not sure... I installed KK on the tablet via Odin, then rebooted and setup, then rebooted into download mode and flashed auto root thru Odin.
Upon reboot I got an error selecting SuperSU, but once I updated it thru the Play Store its been fine.
Using ES Explorer I removed the items I don't need and removed all of the Knox stuff.
There are a few of us this worked for so I don't know what went wrong for you.
If you don't succeed then try again, and again, and again....Good luck.
Click to expand...
Click to collapse
Thx for the response from what i can see you never fully wipe your data before installing 4.4 KK but i did so i believe i lost my root like that. So when i updated the supersu never carried over from 4.3

Srikar_NBK said:
Not needed. The bootloader is same for 4.3 and 4.4
Click to expand...
Click to collapse
Thanks.

Itchiee said:
Not sure... I installed KK on the tablet via Odin, then rebooted and setup, then rebooted into download mode and flashed auto root thru Odin.
Upon reboot I got an error selecting SuperSU, but once I updated it thru the Play Store its been fine.
Using ES Explorer I removed the items I don't need and removed all of the Knox stuff.
There are a few of us this worked for so I don't know what went wrong for you.
If you don't succeed then try again, and again, and again....Good luck.
Click to expand...
Click to collapse
man you're awesome thx a bunch I saw my mistake, I was using chain fire root except the one I had downloaded from a third party site wasn't exactly for my device. Went to chainfire official site got the autoroot bam im rooted at.
Rep + 1

How do you get hancom office?

-Will KitKat restrict access to my SD card? -->Yes but fixable through an app or editing a file (needs root), there is already a thread about that.
Click to expand...
Click to collapse
Sorry, but I cant find thread related to the issue .
What do you mean by `fixable through an app`? I`m not rooted and full stock.

Kit Kat SD Card Issue
clouds5 said:
Hi guys I have some questions about the new Firmware and KitKat in general and you may have answers I'll try to update first post with your answers!
-Will KitKat restrict access to my SD card? -->Yes but fixable through an app or editing a file (needs root), there is already a thread about that.
Click to expand...
Click to collapse
Is this the app you are referring to? http://forum.xda-developers.com/showthread.php?t=2684188

Still not out in Germany

I intend on rooting this tablet. Am I better off rooting 4.3 and then flashing KK update? Or is it possible to update to KK and then root?

supremekizzle said:
I intend on rooting this tablet. Am I better off rooting 4.3 and then flashing KK update? Or is it possible to update to KK and then root?
Click to expand...
Click to collapse
Both ways work equally well I was already rooted with 4.3 but either way has been confirmed working so it doesn't matter.

clouds5 said:
Both ways work equally well I was already rooted with 4.3 but either way has been confirmed working so it doesn't matter.
Click to expand...
Click to collapse
Thank you. So any guide I find on rooting 4.3 should be the same procedure as 4.4?

supremekizzle said:
Thank you. So any guide I find on rooting 4.3 should be the same procedure as 4.4?
Click to expand...
Click to collapse
Yes. Refer to this one
http://forum.xda-developers.com/showthread.php?t=2490805

[Q] How to root Galaxy note 2 N7100XXUENA3?

Hello, I've tried to root my phone by various method available but in vain..
After I did it with CF root and Odin, I got security message on the phone when trying to open superSU (unrespond close).
Also, when verify the root access through rood checker, it says wasn't root properly..
Please help..anyone able to do it?
I've already increase my binary count to 2 and knox to 1. :/
See my phone details attached..
Thanks

Cypher_SGN2 said:
Hello, I've tried to root my phone by various method available but in vain..
After I did it with CF root and Odin, I got security message on the phone when trying to open superSU (unrespond close).
Also, when verify the root access through rood checker, it says wasn't root properly..
Please help..anyone able to do it?
I've already increase my binary count to 2 and knox to 1. :/
See my phone details attached..
Thanks
Click to expand...
Click to collapse
As far as it goes I think after rooting it with CFroot you should update the SuperSU from the Playstore.

Success
hagba said:
As far as it goes I think after rooting it with CFroot you should update the SuperSU from the Playstore.
Click to expand...
Click to collapse
nice..I finally succeeded to root my phone!
Going for DN3 rom..
Thanks!

Fail to intall DN3
hagba said:
As far as it goes I think after rooting it with CFroot you should update the SuperSU from the Playstore.
Click to expand...
Click to collapse
Hello, I was trying to update my note 2 with DN3 kitkat rom today.. But didn't work! :/
I rooted the phone. I got correct root access.
Then followed the instruction to flash the ROM.
After reboot, I could hear the welcome sound(new) and saw the samsung animated logo..then it stuck there. I waited for some 15mins, but nothing happened, only the animated samsung logo.
I saw an issue in TWRP.. saying there was a problem with permission. I don't know what was it. I tried to fix permission, but it failed.
After nothing worked, now I am in the process of recovery from kies.
Perhaps I didn't have the right step by step guide; from rooting the phone to flashing it. :/
If someone could please help, would be great!.. I really want to flash my phone for the DN3 custom rom.
Thanks.

Why do you need to root when flashing custom rom? It is already prerooted. You only need recovery.

madman_cro said:
Why do you need to root when flashing custom rom? It is already prerooted. You only need recovery.
Click to expand...
Click to collapse
As per rooting instruction, it is mentioned that the device must be rooted before flashing a custom rom from stock rom.
While installing the recovery the device is rooted or another way that I tried was to root by CFroot first, which was successfully done then I got the super user access to install a recovery like TWRP,,

Cypher_SGN2 said:
As per rooting instruction, it is mentioned that the device must be rooted before flashing a custom rom from stock rom.
While installing the recovery the device is rooted or another way that I tried was to root by CFroot first, which was successfully done then I got the super user access to install a recovery like TWRP,,
Click to expand...
Click to collapse
+1
Sent from my GT-N7100 using XDA Premium 4 mobile app

As far as i know for latest 4.4.2 stock roms,
Try to flash philz advance recovery(md5.tar) through odin & then flash su.zip from recovery.
Done.
Sent from my GT-N7100 using XDA Premium 4 mobile app

[Q] Note 2 not rooted via cf autoroot

Hello,
I've tried to root my Galaxy Note 2 GT N7100 (KitKat 4.4.2) [original, NO custom ROM or CWM]
with
CF-Auto-Root-t03g-gtn7100.tar.md5
via ODIN
as shown in several tutorials.
All seemed passed ok, nothing obviously went wrong, SuperSU appears in the app drawer.
BUT
If started, SU has been be stopped, Root Checker says, the system is very slow and the phone is NOT rooted (properly).
Updating SU via PlayStore is NOT possible, only to deactivate.
Counter is on 1, Triangle away and other system apps don't work, because the phone isn't really rooted
Wipe data also is changing nothing.
So I've now a NON-rooted phone with the counter on 1, updates via OTA were denied, by reasons seen above.
What can I do? Could 'GalaxyNote2Root' be an option?
THX!
KitKat 44.2
BasisBand: N7100XXXUFND3
Kernel: 3.031-1552758
Build: KOT49H.N7100XXUFNE1

Try to flash CWM via Odin

THX
mustafa_1994emad said:
Try to flash CWM via Odin
Click to expand...
Click to collapse
--------
Ohh, THX for you fast reply!
Does
openrecovery-twrp-2.7.2.1-t03g.img
match?
Or alternative: cwm6-root-note2, but this is old (2008)

I tried rooting my N7105 LTE last night and think I am having the same problem mate, hopefully someone can help!

Most important question: Why do you want to root your device?
If you want to run custom roms, forget about root cause you only need a custom recovery (best the recommended one for the rom) flashed with Odin.
Then you can flash any rom you want through this recovery and most of them are pre-rooted, so :good:
Only if you want to be rooted with stock rom I will try to guide you.

THX
Androidwizzard said:
Most important question: Why do you want to root your device?
...
Click to expand...
Click to collapse
Only to prevent KNOX to deny access to the external card and run some apps, which need SU-rights, e.g. Titanium- / efs- Backup and so one.
At last to make TC working again. This app makes the phone freezing (superSU cannot start and hangs).
Thanks for yor reply.

One way to do it:
Flash custom recovery through Odin and afterwards latest SuperSu.
After bootup the app will deactivate Knox.
EDIT: I have not tested, cause I make my own rooted base-roms, so I hope it will work for you.
I can provide you such a base

mustafa_1994emad said:
Try to flash CWM via Odin
Click to expand...
Click to collapse
Yessssssss! Success!
1.
openrecovery-twrp-2.7.2.1-t03g.img (TeamWin) flashed via ODIN 3 (v3.09)
2.
update-superSU.zip loaded (installed) via CWM
3.
KNOX deactivated (superSU)
4.
triangle away
And good is it!
Thanks for all help! --> @Androidwizzard! & @mustafa_1994emad: Your Thanks Meters had been increased with 1
phalanx41

phalanx41 said:
Yessssssss! Success!
1.
openrecovery-twrp-2.7.2.1-t03g.img (TeamWin) flashed via ODIN 3 (v3.09)
2.
update-superSU.zip loaded (installed) via CWM
3.
KNOX deactivated (superSU)
4.
triangle away
And good is it!
Thanks for all help! --> @Androidwizzard! & @mustafa_1994emad: Your Thanks Meters had been increased with 1
phalanx41
Click to expand...
Click to collapse
link for update supersu.zip pls -_-