Hello, I've tried to root my phone by various method available but in vain..
After I did it with CF root and Odin, I got security message on the phone when trying to open superSU (unrespond close).
Also, when verify the root access through rood checker, it says wasn't root properly..
Please help..anyone able to do it?
I've already increase my binary count to 2 and knox to 1. :/
See my phone details attached..
Thanks
Cypher_SGN2 said:
Hello, I've tried to root my phone by various method available but in vain..
After I did it with CF root and Odin, I got security message on the phone when trying to open superSU (unrespond close).
Also, when verify the root access through rood checker, it says wasn't root properly..
Please help..anyone able to do it?
I've already increase my binary count to 2 and knox to 1. :/
See my phone details attached..
Thanks
Click to expand...
Click to collapse
As far as it goes I think after rooting it with CFroot you should update the SuperSU from the Playstore.
Success
hagba said:
As far as it goes I think after rooting it with CFroot you should update the SuperSU from the Playstore.
Click to expand...
Click to collapse
nice..I finally succeeded to root my phone!
Going for DN3 rom..
Thanks!
Fail to intall DN3
hagba said:
As far as it goes I think after rooting it with CFroot you should update the SuperSU from the Playstore.
Click to expand...
Click to collapse
Hello, I was trying to update my note 2 with DN3 kitkat rom today.. But didn't work! :/
I rooted the phone. I got correct root access.
Then followed the instruction to flash the ROM.
After reboot, I could hear the welcome sound(new) and saw the samsung animated logo..then it stuck there. I waited for some 15mins, but nothing happened, only the animated samsung logo.
I saw an issue in TWRP.. saying there was a problem with permission. I don't know what was it. I tried to fix permission, but it failed.
After nothing worked, now I am in the process of recovery from kies.
Perhaps I didn't have the right step by step guide; from rooting the phone to flashing it. :/
If someone could please help, would be great!.. I really want to flash my phone for the DN3 custom rom.
Thanks.
Why do you need to root when flashing custom rom? It is already prerooted. You only need recovery.
madman_cro said:
Why do you need to root when flashing custom rom? It is already prerooted. You only need recovery.
Click to expand...
Click to collapse
As per rooting instruction, it is mentioned that the device must be rooted before flashing a custom rom from stock rom.
While installing the recovery the device is rooted or another way that I tried was to root by CFroot first, which was successfully done then I got the super user access to install a recovery like TWRP,,
Cypher_SGN2 said:
As per rooting instruction, it is mentioned that the device must be rooted before flashing a custom rom from stock rom.
While installing the recovery the device is rooted or another way that I tried was to root by CFroot first, which was successfully done then I got the super user access to install a recovery like TWRP,,
Click to expand...
Click to collapse
+1
Sent from my GT-N7100 using XDA Premium 4 mobile app
As far as i know for latest 4.4.2 stock roms,
Try to flash philz advance recovery(md5.tar) through odin & then flash su.zip from recovery.
Done.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Related
|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here.
If you have not updated to 4.4, go here.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Edit:
Here is some potentially useful info for root method #1 from ansonantonym.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery then flash SuperSu and the Knox Remover
4) Reboot
5) Download SuperSu from the Play Store
6) Open SuperSu and update the binary when prompted
7) Reboot
8) Enjoy rooted 4.3/4/4
Downloads:
Odin
TWRP (Odin flashable tar)
SuperSu (v1.65)
SuperSu (v2.01)
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
Please be sure to thank Chainfire, Dees_Troy, and Kaito95.
*****
Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jeremyds45 said:
Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.
upndwn4par said:
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.
Click to expand...
Click to collapse
Ah it is so nice to have root again... Thank you so much for putting up with a noob.
Crazy events of a noob that lead me to root
Installed ota 4.3
Tried to root and install superuser by odin and then custom recovery to flash
Root didn't happen because of knox
Could only get to CWM custom recovery if it was right after odin and battery pull?...
Flashed the script to remove knox, which did remove knox
Tried the same root method as above and no root access
Tried supersu and then updating in play with no success
Changed security update settings etc nothing
Reset delvik, cache, permissions, etc nothing
Different root method and files for odin, and custom recovery stuck
Used files from this thread, went into custom recovery and flashed supersu
Installed supersu from play store...
Updated the binary using custom recovery
Rebooted...
ROOT access, all root applications work fine and root sticks even after reboots
I never messed with cf auto root method
THANK you guys for your time effort and sharing, helps noobs out like me a lot!
Sweet! I've missed root since I upgraded using the OTA file you provided. Looking forward to much other great things coming from you
Thank You
upndwn4par said:
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here. Make sure you understand the risks and uncertainties described in the OP.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery and flash SuperSu.
4) Flash the Knox Remover
5) Reboot
6) Download SuperSu from the Play Store
7) Update the binary when prompted
8) Reboot
8) Enjoy 4.3
Downloads:
Odin
TWRP (Odin flashable tar)
UpdateSuperSu
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
*****
Click to expand...
Click to collapse
Method two absolutely worked. Thank you so much. I was scared to flash TWRP but knowing you did it gave me the courage. Have full root and happy
questions about this root
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.
THANKS!!!! your a lifesaver didn't know how much longer i could take without root
Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??
bkong said:
Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??
Click to expand...
Click to collapse
use the TWRP method worked perfected for me
Thanks
PimpMyPC said:
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.
Click to expand...
Click to collapse
The second method worked great. I believe (and the way that worked for me) that you use your custom recovery to flash the knox script, not using Odin and pda. I don't think it removed anything other than knox, there is a different script for removing knox and att bloatware. Should still be able to factory reset... But can't guarantee that.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Root & Knox
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????
tailgunner9 said:
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????
Click to expand...
Click to collapse
Those settings are just for granting device administrator privileges. If unchecked, Knox is still doing it's thing, just not at an administrative level.
Yes, it is safe to try and root.
I have Android Device Manager as admin. That way if I ever lose my device I can just log in to the Play Store and locate and / or wipe the device.
To do this just flash the recovery.img file using odin and clicking the pda button correct?
Is there a way to freeze Knox instead of deleting it in the event I would want to go back to full stock?
After you are rooted, use an app like Titanium Backup(pro) or My Backup pro. Both will freeze it.
Root
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks
tailgunner9 said:
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks
Click to expand...
Click to collapse
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.
indymx said:
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.
Click to expand...
Click to collapse
Thanks indymx, may get the nerve up to try it on my AT&T S3. Let me know if you run into any problems. Guess Rom Manager and other programs that require Root are working Ok and you have rebooted few times to be sure it keeps Root?? Have Happy Thanksgiving.
I have recently rooted my phone i think gone through all the steps on galaxys4root.com. When I was done I tried to update su binary and it said installation failed.then tried to go on titanium backup and it said rom is not rooted .ok i got su app to update but it now saying there is no su binary installed and super su cannot install it . This is a problem But the phone says it is rooted so do I need to re root the phone
Thanks for any help
willdoe said:
I have recently rooted my phone i think gone through all the steps on galaxys4root.com. When I was done I tried to update su binary and it said installation failed.then tried to go on titanium backup and it said rom is not rooted .ok i got su app to update but it now saying there is no su binary installed and super su cannot install it . This is a problem But the phone says it is rooted so do I need to re root the phone
Thanks for any help
Click to expand...
Click to collapse
I think the steps on galaxys4root.com may be outdated or used properly on an older version of Android. Try CF Auto-Root: http://forum.xda-developers.com/showthread.php?t=2294005
Vigz said:
I think the steps on galaxys4root.com may be outdated or used properly on an older version of Android. Try CF Auto-Root: http://forum.xda-developers.com/showthread.php?t=2294005
Click to expand...
Click to collapse
do i have to unroot the phone first or anything i should do before cf auto root right now i have cwm recovery and super su down loaded on it
willdoe said:
do i have to unroot the phone first or anything i should do before cf auto root right now i have cwm recovery and super su down loaded on it
Click to expand...
Click to collapse
No. However, CF Auto-Root will flash stock recovery. If you want to install custom ROMs, simply re-flash CWM Recovery.
willdoe said:
do i have to unroot the phone first or anything i should do before cf auto root right now i have cwm recovery and super su down loaded on it
Click to expand...
Click to collapse
ok thanks a bunch one more question what steps should i follow to re-flash cwm recovery
willdoe said:
ok thanks a bunch one more question what steps should i follow to re-flash cwm recovery
Click to expand...
Click to collapse
I am guessing here but please correct me if i am wrong cf auto root gives me root then i should follow galaxy s4root.com instrutions on how to install cwm recovery
willdoe said:
I am guessing here but please correct me if i am wrong cf auto root gives me root then i should follow galaxy s4root.com instrutions on how to install cwm recovery
Click to expand...
Click to collapse
Once you are rooted you have to choose which recovery you want. Twrp is the most compatible with most Roms out there. To get cwm you need to install ROM manager from the market. The option to flash recovery will be inside. If you want twrp download goo manager and the option to flash will also be in the app. Good luck!
Sent from my SGH-M919 using xda app-developers app
mrzhadow said:
Once you are rooted you have to choose which recovery you want. Twrp is the most compatible with most Roms out there. To get cwm you need to install ROM manager from the market. The option to flash recovery will be inside. If you want twrp download goo manager and the option to flash will also be in the app. Good luck!
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
You can also get either TWRP or CWM as a Tar file that can be flashed in Odin.
You can also download the .img files and flash either with Flashify.
There are a lot of ways to flash recoveries. Each with specific advantages for specific situations.
Ok thanks a bunch to all of ya in my situation I am just trying to get root on my phone it is a t-mobile S4 its running 4.2.2 it seemed easy enough on galaxyS4root.com I think I guessed wrong so I will definitely try cf auto root though I am not done trying yet so again thanks for your time
willdoe said:
Ok thanks a bunch to all of ya in my situation I am just trying to get root on my phone it is a t-mobile S4 its running 4.2.2 it seemed easy enough on galaxyS4root.com I think I guessed wrong so I will definitely try cf auto root though I am not done trying yet so again thanks for your time
Click to expand...
Click to collapse
That website you tried seems to have borked you all up. Cut your losses with methods from there and start over with the CF Auto Root method. it will work perfectly in 30 seconds.
Ya I was pretty aggravated lastnight but got up this morning used cf autoroot and so far so good super su has binary installed titanum back has root its going good so far thanks again for yalls help
Hello,
I've tried to root my Galaxy Note 2 GT N7100 (KitKat 4.4.2) [original, NO custom ROM or CWM]
with
CF-Auto-Root-t03g-gtn7100.tar.md5
via ODIN
as shown in several tutorials.
All seemed passed ok, nothing obviously went wrong, SuperSU appears in the app drawer.
BUT
If started, SU has been be stopped, Root Checker says, the system is very slow and the phone is NOT rooted (properly).
Updating SU via PlayStore is NOT possible, only to deactivate.
Counter is on 1, Triangle away and other system apps don't work, because the phone isn't really rooted
Wipe data also is changing nothing.
So I've now a NON-rooted phone with the counter on 1, updates via OTA were denied, by reasons seen above.
What can I do? Could 'GalaxyNote2Root' be an option?
THX!
KitKat 44.2
BasisBand: N7100XXXUFND3
Kernel: 3.031-1552758
Build: KOT49H.N7100XXUFNE1
Try to flash CWM via Odin
THX
mustafa_1994emad said:
Try to flash CWM via Odin
Click to expand...
Click to collapse
--------
Ohh, THX for you fast reply!
Does
openrecovery-twrp-2.7.2.1-t03g.img
match?
Or alternative: cwm6-root-note2, but this is old (2008)
I tried rooting my N7105 LTE last night and think I am having the same problem mate, hopefully someone can help!
Most important question: Why do you want to root your device?
If you want to run custom roms, forget about root cause you only need a custom recovery (best the recommended one for the rom) flashed with Odin.
Then you can flash any rom you want through this recovery and most of them are pre-rooted, so :good:
Only if you want to be rooted with stock rom I will try to guide you.
THX
Androidwizzard said:
Most important question: Why do you want to root your device?
...
Click to expand...
Click to collapse
Only to prevent KNOX to deny access to the external card and run some apps, which need SU-rights, e.g. Titanium- / efs- Backup and so one.
At last to make TC working again. This app makes the phone freezing (superSU cannot start and hangs).
Thanks for yor reply.
One way to do it:
Flash custom recovery through Odin and afterwards latest SuperSu.
After bootup the app will deactivate Knox.
EDIT: I have not tested, cause I make my own rooted base-roms, so I hope it will work for you.
I can provide you such a base
mustafa_1994emad said:
Try to flash CWM via Odin
Click to expand...
Click to collapse
Yessssssss! Success!
1.
openrecovery-twrp-2.7.2.1-t03g.img (TeamWin) flashed via ODIN 3 (v3.09)
2.
update-superSU.zip loaded (installed) via CWM
3.
KNOX deactivated (superSU)
4.
triangle away
And good is it!
Thanks for all help! --> @Androidwizzard! & @mustafa_1994emad: Your Thanks Meters had been increased with 1
phalanx41
phalanx41 said:
Yessssssss! Success!
1.
openrecovery-twrp-2.7.2.1-t03g.img (TeamWin) flashed via ODIN 3 (v3.09)
2.
update-superSU.zip loaded (installed) via CWM
3.
KNOX deactivated (superSU)
4.
triangle away
And good is it!
Thanks for all help! --> @Androidwizzard! & @mustafa_1994emad: Your Thanks Meters had been increased with 1
phalanx41
Click to expand...
Click to collapse
link for update supersu.zip pls -_-
Hi friendly xda android enthusiasts. I have, after many issues, finally rooted my gt-n5110 using odin and cf-auto. Workered without a hitch. Odin passed, tab rebooted, and BAM, "superSU has stopped working". I immediately navigated myself over to the playstore to reinstall SuperSU and for the first time i have ever seen it wouldnt allow me to. It only gave me a choice to open. No update no uninstall. Going into my apps list it was not present on downloads but was available on device list. Clucked it and no option to uninstall, only to force stop or turn off. So it is incorporated as a system with no access to it. This has me stumped. I have only seen old threads with answers to this and they are temp fixes. Need to know what i can do to fix this on a permanent basis and if someone could help me understand how and why this issue occured it would give me a better understanding and possibly prevent further issues. Thanks in advance guys.
Try the flashable version in this post after you install a custom recovery with odin.
ramjet73
ramjet73 said:
Try the flashable version in this post after you install a custom recovery with odin.
ramjet73
Click to expand...
Click to collapse
This may be a very stupid question but i have to be sure. As i stated the odin DID pass the auto root and tab rebooted. But along with the superSU error i ran root checker and was unable to obtain root. Im assuming its because supersu is not embedded. So with that said is it still ok to attempt to flash a recovery to the tab?
mattdiehl83 said:
This may be a very stupid question but i have to be sure. As i stated the odin DID pass the auto root and tab rebooted. But along with the superSU error i ran root checker and was unable to obtain root. Im assuming its because supersu is not embedded. So with that said is it still ok to attempt to flash a recovery to the tab?
Click to expand...
Click to collapse
Yes. Recovery is independent of whether or not you are rooted. You can install it from Android using tools like Flashify once you are properly rooted, but Odin works fine as long as you have a version of recovery in that format.
Flashing SuperSU from a custom recovery once it is installed should fix the superuser problems you are having.
ramjet73
ramjet73 said:
Yes. Recovery is independent of whether or not you are rooted. You can install it from Android using tools like Flashify once you are properly rooted, but Odin works fine as long as you have a version of recovery in that format.
Flashing SuperSU from a custom recovery once it is installed should fix the superuser problems you are having.
ramjet73
Click to expand...
Click to collapse
Doing now. Thankyou. Fingers crossed.
I had the same issue on my 5110. The flashable root only worked for me until I rebooted, then it would lose root. What ultimately worked for me was to unroot with Kingo. Then with USB debugging enabled, re-rooted with Kingo (which took around 10 min).
Sent from my AT&T Galaxy Note 3 using Tapatalk®
andygev35 said:
I had the same issue on my 5110. The flashable root only worked for me until I rebooted, then it would lose root. What ultimately worked for me was to unroot with Kingo. Then with USB debugging enabled, re-rooted with Kingo (which took around 10 min).
Click to expand...
Click to collapse
If flashing SuperSU from recovery doesn't result in a successful rooted system someone should let @Chainfire know. I've never had a problem rooting a stock ROM that way but let's see what @mattdiehl83 reports.
ramjet73
OS X
ramjet73 said:
If flashing SuperSU from recovery doesn't result in a successful rooted system someone should let @Chainfire know. I've never had a problem rooting a stock ROM that way but let's see what @mattdiehl83 reports.
ramjet73
Click to expand...
Click to collapse
Not near pc. Only have OS X available now. Can anybody walk me through using OS X to flash?
mattdiehl83 said:
Not near pc. Only have OS X available now. Can anybody walk me through using OS X to flash?
Click to expand...
Click to collapse
The recovery? I don't know if there is an OS X version of Odin.
ramjet73
ramjet73 said:
The recovery? I don't know if there is an OS X version of Odin.
ramjet73
Click to expand...
Click to collapse
I am wondering what flashing tool to use with OS X. Odin is for windows. I know of heimdall but that requires ALOT to flash anything. Wondering if there is another odin like tool for OS X
You could try this: http://forum.xda-developers.com/showthread.php?t=2598203
Sent from my AT&T Galaxy Note 3 using Tapatalk®
done.
Hi guys sorry for the delay in update. I ended up using VM ware and it allowed to operate as windows on OS X. I installed TWRP, went into the file manager in TWRP and removed the superSU, i then flashed superSU and rebooted. Once back to the tablet i went and restored services to superSU and went into the play store. And finally the playstore gave me the option the update the superSU. And then the rest was all normal installation of superSU. Hope this thread helps anybody dealing with these issues.
Glad you got it working. :good:
This post in the CF-Autoroot thread might be helpful as well.
ramjet73
there is a easy way to fix it!
download supersu 2.02 and install ta da and it works
2.01 does not work with n5110 well if you flash cf auto root
hmmmm.....
Bordo_Bereli51 said:
there is a easy way to fix it!
download supersu 2.02 and install ta da and it works
2.01 does not work with n5110 well if you flash cf auto root
Click to expand...
Click to collapse
Tada..your a genius. Oh wait i believe i stated it didnt have that option it was disabled. Yes i decided scarcasm would be fitting due to the fact it says ALL OVER xda to please read before you post.
mattdiehl83 said:
Tada..your a genius. Oh wait i believe i stated it didnt have that option it was disabled. Yes i decided scarcasm would be fitting due to the fact it says ALL OVER xda to please read before you post.
Click to expand...
Click to collapse
I read all the post and didnt found something
YOU DONT NEED TO DELETE SUPERSU 2.0.1
Install 2.02 apk and go to supersu, then to settings and push to /system
This is the easiest way. the one you found: go to recovery delete that and this. download supersu 2.0.2 apk and install it not the recovery zip i mean the APK! i didnt say the flashable supersu zip.
oh wait, yes you are a intelligent boy, you know everything.
mattdiehl83 said:
I am wondering what flashing tool to use with OS X. Odin is for windows. I know of heimdall but that requires ALOT to flash anything. Wondering if there is another odin like tool for OS X
Click to expand...
Click to collapse
That's a bit of a dilemma.
Unfortunately Samsung does not support using fastboot and bootloader mode (they call it download mode) so that standard SDK tool Google provides for Windows, Linux and MAC OS X isn't applicable. Your best bet would be to find a Windows PC that you can use to flash the recovery with Odin since that is the most common and best documented method.
Edit: NVM, somehow I responded to an old post of yours.
ramjet73
Hey, everyone. It's been a long time since I've rooted my phone. I ended up hard bricking it and getting a new one. (I tried using ROM Manager to update my Clockwork Mod and it downloaded and installed, and when it said it needed to restart the device, I accepted, and that was the last time I was able to use the phone).
Anyway, I got it replaced and I haven't rooted it. It's been about 8 months or so and I've decided I want to root my phone again. However, after doing a little research, I saw that rooting is now different when the device is running 4.4.2. I want to be able to run CyanogenMod and flash nightlies and whatnot. Is it safe for me to root my phone and flash CyanogenMod? If so, could someone direct me step by step to doing it? It's been so long and I don't want to brick another phone.
tl;dr -> havent rooted a phone in almost a year, kinda forgot how. SPH-L710 running 4.4.2. is it safe? how do i do it? i want cyanogenmod
markopolomp said:
Hey, everyone. It's been a long time since I've rooted my phone. I ended up hard bricking it and getting a new one. (I tried using ROM Manager to update my Clockwork Mod and it downloaded and installed, and when it said it needed to restart the device, I accepted, and that was the last time I was able to use the phone).
Anyway, I got it replaced and I haven't rooted it. It's been about 8 months or so and I've decided I want to root my phone again. However, after doing a little research, I saw that rooting is now different when the device is running 4.4.2. I want to be able to run CyanogenMod and flash nightlies and whatnot. Is it safe for me to root my phone and flash CyanogenMod? If so, could someone direct me step by step to doing it? It's been so long and I don't want to brick another phone.
tl;dr -> havent rooted a phone in almost a year, kinda forgot how. SPH-L710 running 4.4.2. is it safe? how do i do it? i want cyanogenmod
Click to expand...
Click to collapse
you wont brick it by rooting but here is 3 methods
1. first and mostly recommended flash Philz recovery for the D2Lte in Odin just make sure your on the latest one then root your stock rom with the option under Philz settings called Re-root(SuperSU)
2. you can use any recovery and flash the SuperSU zip from Chain fire
3. you can just use TowelRoot for the actual rooting process then download SuperSU and BusyBox from the PlayStore
method 2 implies that you already have a recovery installed
method 3 will give you root but no recovery
6th_Hokage said:
you wont brick it by rooting but here is 3 methods
1. first and mostly recommended flash Philz recovery for the D2Lte in Odin just make sure your on the latest one then root your stock rom with the option under Philz settings called Re-root(SuperSU)
2. you can use any recovery and flash the SuperSU zip from Chain fire
3. you can just use TowelRoot for the actual rooting process then download SuperSU and BusyBox from the PlayStore
method 2 implies that you already have a recovery installed
method 3 will give you root but no recovery
Click to expand...
Click to collapse
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
markopolomp said:
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
Click to expand...
Click to collapse
Towelroot is super easy to use, its a one click method.
You can find a full guide for the S3 here
Pretty simple to do though,
Download the TowelRoot apps from http://towelroot.com.
Enable Unknown sources on your phones, normally this option located on Settings > Security.
Install the downloaded app (tr.apk).
Now run the app, just tap the “make it ra1n” button to start rooting.
Let the app perform the root job, wait for about 15 seconds and your phone will restart automatically.
As soon as the phone is turned on, update SuperSU to v1.99r4 or newer.
vagabond007 said:
Towelroot is super easy to use, its a one click method.
Pretty simple to do though,
Download the TowelRoot apps.
Enable Unknown sources on your phones, normally this option located on Settings > Security.
Install the downloaded app (tr.apk).
Now run the app, just tap the “make it ra1n” button to start rooting.
Let the app perform the root job, wait for about 15 seconds and your phone will restart automatically.
As soon as the phone is turned on, update SuperSU to v1.99r4 or newer.
Click to expand...
Click to collapse
In my case, TowelRoot didn't work due to Samsung Knox secure boot locks the recovery rom. You can't either go to recovery mode at all or read your phone internal storage/external SD storage from TWRP. I flashed CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 and it would get SuperSU installed to your phone. The SuperSu stopped working when disabling Knox.
Alternatively, I tried to downgrade to the 4.04 or 4.1.2 stock rom by Odin, but failed. So far, I don't have any way to root my phone and install CM11. Any suggestions will be appreciated.
wuyiL said:
In my case, TowelRoot didn't work due to Samsung Knox secure boot locks the recovery rom. You can't either go to recovery mode at all or read your phone internal storage/external SD storage from TWRP. I flashed CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 and it would get SuperSU installed to your phone. The SuperSu stopped working when disabling Knox.
Alternatively, I tried to downgrade to the 4.04 or 4.1.2 stock rom by Odin, but failed. So far, I don't have any way to root my phone and install CM11. Any suggestions will be appreciated.
Click to expand...
Click to collapse
that's why you go with the first option i gave.....
6th_Hokage said:
that's why you go with the first option i gave.....
Click to expand...
Click to collapse
Here here. And, you'll learn how to use Odin and philz. Very very valuable (imo) ?
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2
markopolomp said:
Is there a video of how to root doing this from start to finish? I'm just too nervous to do it on my own without visuals lol
Click to expand...
Click to collapse
Have you figured that out?