Viper - T-Mobile Samsung Galaxy S 4

How can I install viper for those who installed it on top of a stock rom? I'm using a stock i9505 rom and I can't figure out how to get it functioning right, even by following the steps on the viper forum.
Sent from my GT-I9505 using XDA Premium 4 mobile app

Tyler.Boston1 said:
How can I install viper for those who installed it on top of a stock rom? I'm using a stock i9505 rom and I can't figure out how to get it functioning right, even by following the steps on the viper forum.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Do not forget install busy box in a rooted device, after install viper fx go to settings>sound>music fx and select viperfx.
i have been able to install viper on stock 4.2, infamous rom 4.2, i905 custom roms, darthstalker 4.2 roms, 4.3 roms, etc. What is your issue?

When I edit the build prop, select viper for music fx, install the super high driver, and enable the equalizer after reboot with all my choice settings, none of the settings changed one bit of the sound. I don't know how to make it work, I put the bass frequency to its highest with my high end headphones (i used to test if changes would stick) and I heard no difference in sound quality. How can I fix it so it works? The only rom I used that had it built in and working is the minions rom.
Sent from my GT-I9505 using XDA Premium 4 mobile app

Related

ics kernels for sense (fix miui v4 video playing) **update

fix miui v4 video problems
here are ics kernels included in viper rom (chinese ota kernel) and tazz's rom (leak kernel) to be used in other sense ics roms.
I actually made these to work with miui v4 as those have garbled video.
Any other rom which needs kernel updated can use this without any problems.
All credits should go to nitsuj17, tazzpirate and microdroid. All I did was extract kernel and hardware drivers from their roms and make a kernel update pakage.
flashing these kernels will fix garbled video problem in miui. both f these have working wifi and data. tested. these will not wipe data but make a backup just in case.
there's no point of flashing these kernels for a viper user. but tazz user may flash viper kernel to fix occasional wifi drop issue
flash only one.!! either tazz's one or viper one
thanks. :good: :laugh:
new version added. people having problems can try flashing that
Any one still having problems with these kernels just flash this boot.img from 4ext recovery after flashing the kernel zip fie.
http://d-h.st/Yvd - boot.img
http://d-h.st/b0A - new repacked viper kernel
fen0m said:
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
Click to expand...
Click to collapse
feel free to hit thanks button if i helped.
Is it need to flash both files???wish to use with kamals miui..
Sent from my Incredible 2 using xda app-developers app
rijujeevan said:
Is it need to flash both files???wish to use with kamals miui..
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
of course not just flash either viper or tazz one.
I recommend to use viper.
*Macrodroid
Thank you for your contribution!
TA4S
I'm familiar with Viper's kernel since I've used viper rom but how does it differ from the one Tazz used? Is it just the Viper one having the wifi fix or is there more? Better yet is there even a reason to use Tazz's over Viper's?
I flashed the viper kernel over Miui and it gets stuck at the white HTC screen. Anyone else?
Sent from my Nexus 7 using xda app-developers app
Me to. I'm using the miui version right before the newest one tho
Using 1130 build
Sent from my pac
fen0m said:
Me to. I'm using the miui version right before the newest one tho
Using 1130 build
Sent from my pac
Click to expand...
Click to collapse
Me to, but only because I couldn't get the newest one to boot.
Sent from my ADR6350 using xda app-developers app
thenaut said:
I flashed the viper kernel over Miui and it gets stuck at the white HTC screen. Anyone else?
Click to expand...
Click to collapse
In what build???
I'm using it in 2.21.21 without any issues.
But I couldn't check it on cdma though!!
Im on gsm. But that shouldn't matter anyway.
Sent from my HTC Incredible 2 using xda app-developers app
thenaut said:
Me to, but only because I couldn't get the newest one to boot.
Click to expand...
Click to collapse
Newer one added in miui op download it and flash viper kernel
Sent from my HTC Incredible 2 using xda app-developers app
blaqbird said:
I'm familiar with Viper's kernel since I've used viper rom but how does it differ from the one Tazz used? Is it just the Viper one having the wifi fix or is there more? Better yet is there even a reason to use Tazz's over Viper's?
Click to expand...
Click to collapse
I think only viper kernel has fixed WiFi drop issue. Tazz kernel hasn't fixed it. And tazz kernel has some graphic driver issues so some items doesn't render properly in some games.
Sent from my HTC Incredible 2 using xda app-developers app
Here's a screen shot of my miui 2.12.21 running viper kernel.
Sent from my HTC Incredible 2 using xda app-developers app
casseer15 said:
Here's a screen shot of my miui 2.12.21 running viper kernel.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
updated****!!!!
please try and provide feedback
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
fen0m said:
What I had to do to get this to work:
Boot the newest miui 12 21 I think
Open 4ext recovery CONTROL app
Select flash boot image.
Flash the new viper kernel in op
Camera looks great and hd recording is good.
Video playback is working well
Hope this helps someone
Sent from my supercharged viper miui
Click to expand...
Click to collapse
Thanx.
I'll add this to op
Sent from my HTC Incredible 2 using xda app-developers app
Happy new Year Everyone
casseer15 said:
fix miui v4 video problems
here are ics kernels included in viper rom (chinese ota kernel) and tazz's rom (leak kernel) to be used in other sense ics roms.
I actually made these to work with miui v4 as those have garbled video.
Any other rom which needs kernel updated can use this without any problems.
All credits should go to nitsuj17, tazzpirate and microdroid. All I did was extract kernel and hardware drivers from their roms and make a kernel update pakage.
flashing these kernels will fix garbled video problem in miui. both f these have working wifi and data. tested. these will not wipe data but make a backup just in case.
there's no point of flashing these kernels for a viper user. but tazz user may flash viper kernel to fix occasional wifi drop issue
flash only one.!! either tazz's one or viper one
thanks. :good: :laugh:
new version added. people having problems can try flashing that
Any one still having problems with these kernels just flash this boot.img from 4ext recovery after flashing the kernel zip fie.
http://d-h.st/Yvd - boot.img
http://d-h.st/b0A - new repacked viper kernel
feel free to hit thanks button if i helped.
Click to expand...
Click to collapse
Had someone been tried any of these kernel on ArcticICSed for the HTC Droid Incredible 2 ROM, Please let me know!!
thanks! :fingers-crossed:
I tried viper kernel on tazz rom and it worked. So I think these kernels will work on any Rom as long as its a vivow, sense based ics rom.
Sent from my HTC Incredible 2 using xda app-developers app
casseer15 said:
I tried viper kernel on tazz rom and it worked. So I think these kernels will work on any Rom as long as its a vivow, sense based ics rom.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Using this on MIUI, good work. Now all I need is to stop the radio from disconnecting for a few seconds when WIFI connects and I will be 100% content, until I get the itch to flash again, that is. Thanks again
Sent from my HTC Incredible 2 using xda app-developers app
thenaut said:
Using this on MIUI, good work. Now all I need is to stop the radio from disconnecting for a few seconds when WIFI connects and I will be 100% content, until I get the itch to flash again, that is. Thanks again
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
you're welcome. glad i could help.
:good:

Poweramp FC on TW 4.3

Anyone have any luck getting Poweramp to work properly on their S3 while using a leaked TW 4.3 ROM? It will open for about 30 seconds then FCs. It has happened on both leaks. And Poweramp worked fine on CM 4.3.
I tried all the usual fixes: Permissions, clear data, install from Play Store, restore from ROM Toolbox, fresh wipe and clean ROM install.
VolcanicSkunk said:
Anyone have any luck getting Poweramp to work properly on their S3 while using a leaked TW 4.3 ROM? It will open for about 30 seconds then FCs. It has happened on both leaks. And Poweramp worked fine on CM 4.3.
I tried all the usual fixes: Permissions, clear data, install from Play Store, restore from ROM Toolbox, fresh wipe and clean ROM install.
Click to expand...
Click to collapse
Is poweramp changed to support 4.3 ?
It works on 4.4. Probably just a bug in the leak.
Sent from my Nexus 5 using Tapatalk
Are you using saranhai's or TLS' Rom? Or have you flashed any mods such as reboot mod, sound mod, xposed, etc?
I just installed to test and verify and it seems to be running perfectly for me. (I'm using the paid/licensed version if it makes a difference)
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Are you using saranhai's or TLS' Rom? Or have you flashed any mods such as reboot mod, sound mod, xposed, etc?
I just installed to test and verify and it seems to be running perfectly for me. (I'm using the paid/licensed version if it makes a difference)
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
First off... Thanks for the leak!
Second... Thanks for confirming that Poweramp works on 4.3 (I use the paid version too).
Right now I am using Saranhai's Slim version of the UVUEMJC ROM. I also tried it on TLS's UVUEMJ4 ROM. I haven't made any changes to this ROM at all (on TLS's I had changed a lot with the Wanam module). Though I do believe that the Xposed Mod is pre-installed on Saranhai's ROM.
I installed the ROM (full wipe), let it sit for 5-10 minutes, setup my Google account, rebooted, then installed my most used apps. I will try to download the stock version of Saranhai's ROM to give that a shot.
Thanks so much for the fast replies!
No problem. If xposed is built into saranhai's Rom, you may want to try the deodexed Knox free version from my thread. It has no mods and only Knox type stuff removed.
Sent from my SGH-T999 using Tapatalk
Also using the paid version on docs stick deodexed mjc with no issues and I am using xposed also.
Sent from my SGH-T999 using XDA Premium 4 mobile app

Galaxy S4 Volume Mod

This will make your rooted Galaxy S4 volume level much high or slightly high user preference.
Step 1. Download the file and extract it.
Step 2. Pick which you want there 3 zip files, Loud, Slightly and Normal.
Step 3. Put it on your sdcard or on phone and boot your device in recovery with clockwork or any other recovery.
Step 4. Install and enjoy.
I tested 100x times Work Good.
Only been tested in stock rom.
Let me know how it's working for you.
Credit goes to : sbreen94
for these files (snd_soc_msm_2x_Fusion3_auxpcm and snd_soc_msm_2x_Fusion3)
All I did was extracted those files from hyperdrive rom and make a updater-script to install it on recovery.
I flashed loud and it caused my phone to continuously freeze. When opening play music, everything would freeze. Had to reflash ROM, wipe cache and fix permissions and I'm good again.
I also accidently thanked. Definitely not on purpose.
Sent from my GS4 using xda app-developers app
DevinQuigley said:
I flashed loud and it caused my phone to continuously freeze. When opening play music, everything would freeze. Had to reflash ROM, wipe cache and fix permissions and I'm good again.
I also accidently thanked. Definitely not on purpose.
Sent from my GS4 using xda app-developers app
Click to expand...
Click to collapse
Please explain what rom where you using? when you flash the loud mod.
I only tested on Stock Rom. and work perfectly.
Has anyone figured out if this works on aosp roms? If I don't get a response by the time my backup finishes then I will just try it myself.
That's probably the best way to see if it works for you. Post your results so the Dev knows what happened.
I just installed the loud zip and it made a huge difference. So far so good, I'm running the Infamous Rom.
Any one tried this on cm KitKat?
Edit: I just tried to flash this thru recovery and it doesn't seem to work on CM/KitKat/aosp base roms. The installation kept aborting.
Sent from my SGH-M919 using XDA Premium 4 mobile app
makavelicruz said:
Any one tried this on cm KitKat?
Edit: I just tried to flash this thru recovery and it doesn't seem to work on CM/KitKat/aosp base roms. The installation kept aborting.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2293133
this works fine but the issue I had is I lose the "Ok Google" when I say it doesn't respond I like that feature but check it out if your willing sacrifice the listen command
Would this work on 4.3
Sent from my SGH-M919 using Tapatalk 2
rg75 said:
Would this work on 4.3
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
+1
Sent from my SGH-M919 using XDA Premium 4 mobile app
I will try...
Any news if it will work on 4.3?..
??
egren58 said:
Any news if it will work on 4.3?..
??
Click to expand...
Click to collapse
Works on my sph 720 on 4.3
works on i9506
madtork said:
Works on my sph 720 on 4.3
Click to expand...
Click to collapse
Hi, this mod work on Galaxy S4 i9506??
i have been searching for kernels,mod,etc... and there isnt anything...
Works on 4.4.2?
Sent from my SGH-M919 using xda app-developers app
Just how much louder does it make it? And will it work with X louder module and CM's DSP manager?
Going to try it on CM11 Android 4.4.4
It works!!!
Thank you!
Smrkulja said:
It works!!!
Thank you!
Click to expand...
Click to collapse
What ROM are you on?
DSDONE said:
What ROM are you on?
Click to expand...
Click to collapse
Stock T-Mobile 4.4.2

note 2 dn3 rom

I already installed dn3 v3.1.1 on my note 2 n7105. version 3.2 is avaliable to download showed in ota update. i click download but get error message "there was an error download". How to fix it? Where to download dn3-3.2-lte firmware? link plz...
https://www.dropbox.com/s/xlq9yv1mv45g3fk/dn3-3.2-lte(ditto-note3)_3.2.zip
Make sure you are on stock kernel when you flash it. You can change your kernel after it has installed
Sent from my GT-N7105 using XDA Premium 4 mobile app
thanks Alot
:laugh::laugh::laugh::laugh::laugh:
Thanks alot for the file i have been searching it for along time
keep your good work
Why should i flash a kernel , What are the advantages i get (im a noob please help me)
and if its a must can you give me a link
something is wrong with the update zip, it's only 338KB in size. Shouldn't be in bigger than that?
It's only really a sound pack so that's why it's small. Some people need a custom kernel on this rom to get wifi working as wifi won't work with this rom on a 4.1.2 bootloader. A custom kernel gives you options to undervolt and over clock. It can also give you options to increase volume ,modify screen calibration and increase charging rates. Devil kernel also gives you the option to dual boot 2 different roms.
Sent from my GT-N7105 using XDA Premium 4 mobile app

Dropzone thing and xposed installer on rooted stock rom

So I'm using a custom rom.
But the thing I don't like about custom roms is that the stock Huawei Camera app is not working properly.
I used a custom rom because in the stock rom, I can't use pie control because of the dropzone thing. I also cannot use xposed installer. I already updated/installed the latest framework but it still can't use any modules.
Any idea how to solve these problems? I can't search anything about these (or maybe I was not searching deep enough?)
Advanced thanks for those who can help :thumbup:
Sent from my SM-P600 using XDA Free mobile app

Categories

Resources