Develop Bugs

Can't install any 4.2.2 roms

I'm with Bell using the E973. Tried installing every 4.2.2 rom here and the same thing happens each time. Black screen after I reboot phone. Is there some sort of procedure aside from wiping data/reset/cache/davlik/system?
Btw, I'm rooted and unlocked. On 4.1.2 right now.

nagameno said:
I'm with Bell using the E973. Tried installing every 4.2.2 rom here and the same thing happens each time. Black screen after I reboot phone. Is there some sort of procedure aside from wiping data/reset/cache/davlik/system?
Btw, I'm rooted and unlocked. On 4.1.2 right now.
Click to expand...
Click to collapse
Which recovery?
Sent from my CM10.2 OGE973

Clockwork 6.0 something.

nagameno said:
Clockwork 6.0 something.
Click to expand...
Click to collapse
So you're
1.rooted
2.unlocked (with FreeGee??)
3.install recovery
4.download custom rom for E973 not E975
5.reboot into recovery
6.***make nandroid backup***
7.after backup, wipe cache-dalvik-data-system (DO NOT WIPE SDCARD)
8.factory/reset
9.flash downloaded custom rom
10.flash Gapps for correct Android version
And you're done.
Give us feedback :good:
Sent from my CM10.2 OGE973

JasonBourne.Qc said:
So you're
1.rooted
2.unlocked (with FreeGee??)
3.install recovery
4.download custom rom for E973 not E975
5.reboot into recovery
6.***make nandroid backup***
7.after backup, wipe cache-dalvik-data-system (DO NOT WIPE SDCARD)
8.factory/reset
9.flash downloaded custom rom
10.flash Gapps for correct Android version
And you're done.
Give us feedback :good:
Sent from my CM10.2 OGE973
Click to expand...
Click to collapse
I don't think I unlocked it with freegee. This was a while ago when I unlocked it. I download the E973 roms ONLY. Those instructions I have been following for all the 4.2.2 roms. None of them seem to want to boot after I restart from recovery. Only way I get back to working phone is if I reinstall the 4.1.2 rom I have backed up on my sd.

nagameno said:
I don't think I unlocked it with freegee. This was a while ago when I unlocked it. I download the E973 roms ONLY. Those instructions I have been following for all the 4.2.2 roms. None of them seem to want to boot after I restart from recovery. Only way I get back to working phone is if I reinstall the 4.1.2 rom I have backed up on my sd.
Click to expand...
Click to collapse
you must unlock with freegee before you can do anything. I was like you, until i actually read all the posts one by one and kept trying.
good luck!

[TUTORIAL] Flash CyanogenMod on TWRP

For CM11 Nightlies:
Find nightlies here:
http://download.cyanogenmod.com/?device=n1
If you're already on CM 10.2, just wipe cache and dalvik. Flash over your current build.
If you're coming from anything else, wipe cache, dalvik, data, and system. Then flash normally.
If you want gapps, you'll have to flash gapps as well.
No need for any modified files on nightlies. I assume that official stable builds will still be defaulted to flash on stock recovery though.
————————————————————————————————
CM 10.2 Information. Please do not use the following to flash CM11!
This is the method that I used to install CyanogenMod on TWRP.
I have tested this, and it is working perfectly on CM builds:
cm-10.2-WPPH47N-n1
cm-10.2-WPPH50O-n1
I will continue to test and update as new CM builds come out until CM flashes normally on TWRP
————————————————
First - Have TWRP as your recovery (2.6.3.1). Don't ask me how to do that.
Second - Backup your ROM! Just in-case something breaks, it's not my fault, and I'm not responsible.
————————————————
Now, we begin:
Download the newest CM build for the Oppo N1 from http://www.cyanogenmod.org/hardware/oppo-n1/#images
————————————————
After downloading your CM build from the above link, you'll need to follow these instructions to get setup for flashing in TWRP.
To modify your downloaded CM file, you can use either of the two methods below:
1: You can modify it yourself. It's actually very simple, just one line change.
2: I have attached an already modified updater-script to my post. You can use that and drop it into place (the file inside the zip, not the whole zip).[/b]
YOU ONLY NEED TO USE ONE OF THESE METHODS!
Method 1: To modify the file yourself:
First, open your CM zip that you have downloaded.
Navigate to the folder: META-INF\com\google\android\
Open the updater-script
Remove the first line only! You will remove:
Code:
assert(getprop("ro.product.device") == "N1" || getprop("ro.build.product") == "N1");
Do not remove anything else unless you know exactly what you're doing!
If you modified the file within the .zip, just save the file and it should save to the CM zip.
If you extracted the .zip, save the file and then go back and rebuild the zip.
Transfer over your newly modified CM.zip file to wherever you can find it on your phone (I drop it straight in the root folder).
——————————
Method 2: To download my pre-modified updater-script
Download my attached file (updater-script.zip)
Extract the file inside the zip (there's only one file)
Open your CM zip that you have downloaded.
Navigate to the folder: META-INF\com\google\android\
Simply copy your extracted updater-script from where you extracted it and drop it into the CM zip (It should save after)
Transfer over your newly modified CM.zip file to wherever you can find it on your phone (I drop it straight in the root folder).
————————————————
Reboot into TWRP:
Advanced Wipe ->
Wipe Dalvik Cache, Cache, and Data. ***DO NOT WIPE SYSTEM***
Then install your modified CM file. Please, remember, DO NOTE WIPE SYSTEM.
Reboot system! Done!
:victory:
I hope this all makes sense...
Basically you download the CM rom
Modify or copy the updater-script into the zip
Then you move the ROM to you phone
Then you go through the above area with wiping and flashing
* Pictures are attached
* Please let me know if there are any problems with this.
* Both versions of CM released so far have identical updater-script files. The .zip that I have attached will work on both builds.
* I will keep updating as needed
• Last updated: January 1, 2014

We're working on fixing TWRP so the asserts work properly.
https://github.com/omnirom/android_bionic/commit/4482d8513920d614e3799a214c5bad07b72580d2#diff-1 broke a lot of things.
https://github.com/omnirom/android_bionic/commit/ad76c85b9ca587084089d086f954158bc0eae905 allows flashing newer firmwares on older recoveries - but not the other way around.
The short-term fix is a TWRP build made from a 4.3 tree - this is 90% done.

@OP: Working with Entropy last night to squash this bug, I flashed his newly built TWRP and was able to go back to ColorOS or CM without issue. https://dl.dropboxusercontent.com/u/22964990/n1_twrp_43.img

Entropy512 said:
We're working on fixing TWRP so the asserts work properly.
Click to expand...
Click to collapse
That's fantastic. I'm glad to hear that it's being work on/working. I suppose fixing TWRP trumps fixing the ROM :highfive:

rayfin said:
@OP: Working with Entropy last night to squash this bug, I flashed his newly built TWRP and was able to go back to ColorOS or CM without issue. https://dl.dropboxusercontent.com/u/22964990/n1_twrp_43.img
Click to expand...
Click to collapse
BTW, I'd prefer that my personal dropbox not be directly linked. The same file is now an attachment to my post in the TWRP thread.

Harfainx said:
That's fantastic. I'm glad to hear that it's being work on/working. I suppose fixing TWRP trumps fixing the ROM :highfive:
Click to expand...
Click to collapse
i have some question can u help me :3
1. this download link is the file you already fix it right ?
https://www.4shared.com/download/UPP...N-N1_FIXED.zip - No wait - Direct download link - Full flashable ROM
Click to expand...
Click to collapse
so i just have to download and flash with TWRP. dont have to fix any else ?
2. This is CM10.2 rom official for N1 work with O-Touch in the back ?

kenjilolip0p said:
so i just have to download and flash with TWRP. dont have to fix any else ?
2. This is CM10.2 rom official for N1 work with O-Touch in the back ?
Click to expand...
Click to collapse
Correct, the very top link in the OP is the full ROM. You can download the full ROM and flash it in TWRP. It's already fixed and ready to go.
So far that has been the only ROM to come out from Oppo for CM. It contains most of the ColorOS features that work. "Knock" to wake (double-tap), screen off gestures, camera orientation, etc. I'm almost positive that the back touch-pad was working. I haven't been on CM in a little bit though. I'm still working on making changes to ColorOS, and updating as I go.

Harfainx said:
Correct, the very top link in the OP is the full ROM. You can download the full ROM and flash it in TWRP. It's already fixed and ready to go.
So far that has been the only ROM to come out from Oppo for CM. It contains most of the ColorOS features that work. "Knock" to wake (double-tap), screen off gestures, camera orientation, etc. I'm almost positive that the back touch-pad was working. I haven't been on CM in a little bit though. I'm still working on making changes to ColorOS, and updating as I go.
Click to expand...
Click to collapse
Camera orientation is handled by the camera HAL blobs.
CM does have back touchpad support but it's wonky (which is why omni hasn't merged it yet, we're still discussing whether to completely rearchitect it or just fix it.)

good work
Sent from my M045 using XDA Premium 4 mobile app

Except root it works
Hi,
I tried everything and it works. But the root is not working well. I tried installing SuperSu.zip as well as apk nothing works. Any thoughts ?
Francis.

fesar said:
Hi,
I tried everything and it works. But the root is not working well. I tried installing SuperSu.zip as well as apk nothing works. Any thoughts ?
Francis.
Click to expand...
Click to collapse
I lost root as well
and superSU files insatlled into TWRP didnt work ...
any ideas how to back root acces ?
apart of it
I cannot instal via TWRP CM10.2 (4.3) cm-10.2-WPPH50O-n1-signed.zip
I v got error message
what you are latest build on ?

nowy57 said:
I lost root as well
and superSU files insatlled into TWRP didnt work ...
any ideas how to back root acces ?
apart of it
I cannot instal via TWRP CM10.2 (4.3) cm-10.2-WPPH50O-n1-signed.zip
I v got error message
what you are latest build on ?
Click to expand...
Click to collapse
Go into SuperSU and remove it in the settings (unroot). That will get rid of all of the current SuperSU stuff.
Then flash SuperSU in TWRP.
To flash the unmodified CM, you can try the TWRP in post #3 of this thread HERE.
Or you'll have to remove the same line in the updater-script. The same method posted in the OP. Don't use the uploaded updater-script that I have there though. You'll need to change your own. It's a really simple fix. You don't have to extract all the files out. You can just modify the one file (I use Notepad++).
Sometime tomorrow I'll update the whole OP to include the newest CM version. I'm about to head out to our New Year's event, so I won't be available for the evening.
Enjoy the evening everyone. I wish you all the best! :good: :victory:

i have installed TWRP from #3 - not succes install CM newest version after this
i have unthick superSU and then install again via TWRP superSU.zip after that thick superSU on system android and no succes - root acces didnt come
happy new year
-------
I am a little dissapointed couse I downloaded CM ROM from OFFICIAL SITE http://www.cyanogenmod.org/hardware/oppo-n1/#images and I cannot install it SIMPLE on my device

OP updated! The newest release of CM has been added. I'll keep on top of it from now on, sorry about the delay.
I'm not going to host the CM builds anymore, since the modification is so small from the original CM build. Everyone flashing this should be capable of making the small change that's outlined in the OP.
:highfive:

@Harfainx
it is not a problem to me to delete first line from updater-script but what then ?
I have to zip ii normally or compile using special prgogram ?
why dedicated ROM from CM/OPPO site is not allow to simple install via TWRP ?
it shuld be so easy

nowy57 said:
@Harfainx
it is not a problem to me to delete first line from updater-script but what then ?
I have to zip ii normally or compile using special prgogram ?
why dedicated ROM from CM/OPPO site is not allow to simple install via TWRP ?
it shuld be so easy
Click to expand...
Click to collapse
After dropping the file in, just save the zip again. If you haven't extracted it, you shouldn't have to do anything special.
Also, CM can easily be installed on the stock recovery. Oppo doesn't control other recoveries.

Harfainx said:
After dropping the file in, just save the zip again. If you haven't extracted it, you shouldn't have to do anything special.
Also, CM can easily be installed on the stock recovery. Oppo doesn't control other recoveries.
Click to expand...
Click to collapse
okay , I will try it and confirm
I v got mac osx
under mac I unzip ROM , deleted first line from script then zip it , it doesent work .
but under windows - working good

Harfainx said:
Reboot into TWRP:
Advanced Wipe ->
Wipe Dalvik Cache, Cache, and Data. ***DO NOT WIPE SYSTEM***
Then install your modified CM file. Please, remember, DO NOTE WIPE SYSTEM.
Reboot system! Done!
Click to expand...
Click to collapse
What's wrong with wiping system?
You don't even wipe system if you go from ColorOS to CyanogenMod?
- Frank

cm11 nightlies are out and downloadable from cyanogenmod
Harfainx said:
After dropping the file in, just save the zip again. If you haven't extracted it, you shouldn't have to do anything special.
Also, CM can easily be installed on the stock recovery. Oppo doesn't control other recoveries.
Click to expand...
Click to collapse
Cm11 nightlies are out..
Do you think we can flash on twrp
If so what would you wipe...
I was thinking about using banks minimal.. 19 MB..
Please give the community tour thoughts and a step by step tutorial..
I would download the nightly from cyanogenmod and banks gapps.. Check md5 alla onmy phone
Reboot recovery and wipe all maybe even system except sdcard
Flash cyanogen then gapps then
Rewipe cache and dalvik
Reboot
I am on omni nightlies now.. Thanks in advance

where do you see nightlies for oppo n1 ?
edit:
ohhh I see
http://download.cyanogenmod.org/?device=n1
better later than never
I just lost hope for good support and sold my oppo n1
I didnt belive for good support having it from one month and non of help from CM team

Give me a hand will ya?

Currently running on AOKP OTA ver. 3.2
I would like to have someone who can guide me slowly step by step carefuly to whatever better option there is.
I been having lots of troubleshooting with phone not responding how it should and I have to keep rebooting to often.
I appreciate your help.
Thank you

Since you're running a custom rom, you could update your recovery to the latest CWM or TWRP and flash a different or updated rom.

Could you help me to do that?
Just guide me step by step.
Ok I already did a backup.

What custom recovery are you running? The first thing would be to get the latest img for your custom recovery and install it.
How did you root and install a custom recovery on your phone?

I am running AOKP OTA Ver. 3.2
That time I did it following a step by step guide with someone who was guiding me.
Hmm what else would you like to know?

That's the OS. What program did you use to backup your rom?

audit13 said:
That's the OS. What program did you use to backup your rom?
Click to expand...
Click to collapse
Oh…sure sure.
One I use is Team Win Recovery Project v2.4.1.0

You should update to the latest TWRP from here: http://teamw.in/project/twrp2/104
You can flash it using Odin. Make a full backup using the new TWRP. Find a rom you want to try, save it to the phone, and flash it using the ypdated TWRP. Don't forget to wipe the phone before changing ROMs.

audit13 said:
You should update to the latest TWRP from here: http://teamw.in/project/twrp2/104
You can flash it using Odin. Make a full backup using the new TWRP. Find a rom you want to try, save it to the phone, and flash it using the ypdated TWRP. Don't forget to wipe the phone before changing ROMs.
Click to expand...
Click to collapse
Ok So I delete the older TWRP get the new one.
Then back and wipe which of all the options?
And of course if I was using AOKP which I really liked, what will your recommend me?

Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.

audit13 said:
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
Click to expand...
Click to collapse
Ok perfect!
Thank you very much sir.
I will let you know when I'm done.

audit13 said:
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
Click to expand...
Click to collapse
Ok next is to find a nice rom, Any suggestions? (S3rx or SlimBean) keep in mind my device is an i747
Also do I use my computer to download the rom or should I use my phone directly?
I decided to go with Hyperdrive RLS16
Currently downloading it.
Will be flashing soon.

Harkadenn said:
Ok perfect!
Thank you very much sir.
I will let you know when I'm done.
Click to expand...
Click to collapse
Make sure to backup your apps with Titanium Backup.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

juanhbk1 said:
Make sure to backup your apps with Titanium Backup.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the warning.
Will do for the future.

Harkadenn said:
Ok next is to find a nice rom, Any suggestions? (S3rx or SlimBean) keep in mind my device is an i747
Also do I use my computer to download the rom or should I use my phone directly?
I decided to go with Hyperdrive RLS16
Currently downloading it.
Will be flashing soon.
Click to expand...
Click to collapse
You can download it directly to your computer and use Windows Explorer to copy it to a microSD card or directly to your phone. It's probably quicker to download a few to your computer and transfer them all at once so you can try different ones.
Have fun flashing ROMs.

audit13 said:
You can download it directly to your computer and use Windows Explorer to copy it to a microSD card or directly to your phone. It's probably quicker to download a few to your computer and transfer them all at once so you can try different ones.
Have fun flashing ROMs.
Click to expand...
Click to collapse
Ok as I extract the rom to my external sd card of my phone it's asking me many permissions such as:
"Do you want to copy Cesium.ogg to your device?
Your device might not be able play or view this file."
I said yes to skip all of the next warnings because every time i hit yes comes another warning.
Also strangely the rom took forever to download and the extraction is also taking way to long.
I didn't had to go through so much stuff by that time I downloaded AOKP rom. :/
Still extracting as I update this post... Something is not right...

I will have to cancel this.
It's stuck.

Do not extract the files. Just flash the zip.

audit13 said:
Do not extract the files. Just flash the zip.
Click to expand...
Click to collapse
Ah, to late I'm currently trying to find the right download link for Slim Bean rom.
Mind if you help me here?
My device is an I747.
UPDATE:
I believe is this one?
http://www.slimroms.net/index.php/d...o/6801-slim-d2att-4-3-build-2-2-official-1738
UPDATE!!
Yup it's done.
Thank you very much for your patience.
Quick question.
How do I restore all my phone data such as my contacts numbers and messages from the back up I did with the other rom?
Do I just restore the last backup and it should recognize the new rom?
UPDATE!
So it went back to where it was of course.
How should I back it all up and restore in the new rom?

Looks right. I have an i747m, not the i747.

Need help flashing cutom rom

Hey guys so i've had a rooted note 2014 for awhile now and want to get into custom roms. I'm on stock 4.4.2 and i'm trying to flash liquidsmooth but have a couple of questions. So on the installation guide it says
"First time installing LiquidSmooth to your Samsung Samsung Note 10.1 (2014), or coming from another ROM:
- Make sure you're running latest Recovery
- Copy GApps zip, SuperUser zip and Liquid ZIP to your internal SDCard
- Boot into Recovery
- Flash Liquid zip from internal SDCard
- Flash GApps zip from internal SDCard
- Reboot
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!"
It seems simple enough but how do I know if i'm running the latest recovery? Also is there any other things I need to do or know before I attempt this?

Dachank said:
Hey guys so i've had a rooted note 2014 for awhile now and want to get into custom roms. I'm on stock 4.4.2 and i'm trying to flash liquidsmooth but have a couple of questions. So on the installation guide it says
"First time installing LiquidSmooth to your Samsung Samsung Note 10.1 (2014), or coming from another ROM:
- Make sure you're running latest Recovery
- Copy GApps zip, SuperUser zip and Liquid ZIP to your internal SDCard
- Boot into Recovery
- Flash Liquid zip from internal SDCard
- Flash GApps zip from internal SDCard
- Reboot
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!"
It seems simple enough but how do I know if i'm running the latest recovery? Also is there any other things I need to do or know before I attempt this?
Click to expand...
Click to collapse
Hi. Did you flash TWRP? I rooted then used flashify to install TWRP 2.8.5.0. I have had success using TWRP 2.8.5.0 but for some people issues this version and the have to use 2.6.3.1.
LiquidSmooth maintainer for d2usc/vzw & p600

Orion116 said:
Hi. Did you flash TWRP? I rooted then used flashify to install TWRP 2.8.5.0. I have had success using TWRP 2.8.5.0 but for some people issues this version and the have to use 2.6.3.1.
LiquidSmooth maintainer for d2usc/vzw & p600
Click to expand...
Click to collapse
I actually just went ahead and put 2.8.6.0 on there with odin and flashed your rom and it worked out alright. Do you happen to know what problems people were having with 2.8.5.0? Great ROM btw

Dachank said:
I actually just went ahead and put 2.8.6.0 on there with odin and flashed your rom and it worked out alright. Do you happen to know what problems people were having with 2.8.5.0? Great ROM btw
Click to expand...
Click to collapse
Wiping data and cache mainly. And thank you.
LiquidSmooth maintainer for d2usc/vzw & p600

Cannot flash any type of ROM

Hello there, I am using the Find 7a with a TWRP recovery flashed. However, I cannot seemed to flash any type of ROM. When I install the custom ROM which is the CM12, the recovery seems to restart and the custom ROM is not flashed. Can anybody help me since I already wipe everything in my device. I'm okay to lose any data from the phone.
p/s I also have a backup using the twrp but still cannot managed to flash the backup

Have you tried a different rom? Nameless and omnirom have unified storage, marshmallow and are pretty well asop. Try them
Sent from my X9076 using Tapatalk

zakiamani97 said:
Hello there, I am using the Find 7a with a TWRP recovery flashed. However, I cannot seemed to flash any type of ROM. When I install the custom ROM which is the CM12, the recovery seems to restart and the custom ROM is not flashed. Can anybody help me since I already wipe everything in my device. I'm okay to lose any data from the phone.
p/s I also have a backup using the twrp but still cannot managed to flash the backup
Click to expand...
Click to collapse
Hi, did you solved your problem?

If it were me, I would try to redownload & reflash twrp or changing it with a newer version.
Maybe that will fix the problem. Cheers!