[Q] Rom Galaxy W no space left on sd card - Samsung Galaxy W I8150

Hi everyone ,
i cannot install this ROM on my galaxy w recovery mode
because of this message " E:short write of /tmp/sideload/package.zip (no space left on device) "
i cannot use Odin because kies doesn't see the phone.
the ROM installed is CyanogenMod 10.2 - Alpha 4 - 20131123 (4.3.1)

elabaseey said:
Hi everyone ,
i cannot install this ROM on my galaxy w recovery mode
because of this message " E:short write of /tmp/sideload/package.zip (no space left on device) "
i cannot use Odin because kies doesn't see the phone.
the ROM installed is CyanogenMod 10.2 - Alpha 4 - 20131123 (4.3.1)
Click to expand...
Click to collapse
Do a full wife before you install new ROM.
For installation, first, make sure you got your ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
install ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory! Credit to Arsradu

select "wipe data / factory reset" i did that but i this line
.
.
.
1." go to "mounts & storage" and format /system."
2. under the same menu, format /sdcard not there.

i installed CMW
it works i don't know what to say thank you
:good::good::good::good:

elabaseey said:
i installed CMW
it works i don't know what to say thank you
:good::good::good::good:
Click to expand...
Click to collapse
NP bro, glad it worked

No space left
Hi
I have a Galaxy i9000 with Gingerbread XWJVI
I have CWM recovery 2.5.1.2
ROM Manager 5.5.3.7 (if I select "New start with recovery" it end with ...verification failed...)
If I restart in Manual mode (loud+start+menu)
then problem with...no space left on device.... message after wiping cache, data/factory reset and trying to "apply update from sdcard"
Sorry but I do not know where to find this:
...go to "mounts & storage" and format /system. This is extremely important!
....under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
I suppose mnt/sdcard but I do not see any /system and what do you mean with format ?
What am I doing wrong ?
thanks

dec0der said:
Do a full wife before you install new ROM.
For installation, first, make sure you got your ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
install ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory! Credit to Arsradu
Click to expand...
Click to collapse
Thank you so much. Solved my space problem with CM 11! :good::good::good:

Related

[U8650] ClockworkMOD v5.0.2.7 for Huawei

- Unrar "Huawei U8650.rar ClockworkMod 5.0.2.7."
2 - Turn off your cell phone battery 5sec, so put in again and enter fastboot mode: (VOL- and POWER simultaneously for 25sec)
3 - Connect mobile phone to the PC.
4 - Execute: "ClockworkMod 5.0.2.7 (Bootloader-Volum DOWN + POWER)"
5 - Run "reboot" (even DO NOT take the cable)
6 - You are now in ClockworkMod 5.0.2.7
(if windows do not find the drivers, look them in the folder "Drivers for Huawei U8650")
This should of been posted in the dev section on XDA,just giving you some advice
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
Mr.Highway said:
This should of been posted in the dev section on XDA,just giving you some advice
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
Click to expand...
Click to collapse
Thx for the advice.
CWM 5.0.2.7 ignoring ext partition?
Hi everybody. I have installed CWM v5.0.2.7 on my SONIC U8650 smartphone. I'm having a slight problem with this recovery (same occurred with previous version 4.0.1.4). It's not saving the ext partition that I have on the sd card. When I perform a backup through CWM, it skips the saving of sdext as this partition is not being found. Also, with previous CWM version 4.0.1.4, there was an option to manually mount the partition (just in case it is not found at the time of backup) in the "Mounts and storage" option. This option is no longer present in CWM 5.0.2.7 so I can't manually mount the partition (whether this would let CWM recognize the partition and make a proper backup of it). In the end I'm not able to have sdext fully backed up (I resorted at doing a manual backup on my notebook with LINUX with partimage) along with all the other partitions such as /system, /data, /cache etc etc. I therefore wonder if this is a bug and if there's a way to get around this.
I have another smartphone with CWM v5.0.2.3 installed and on this one the backup of the sd-ext partition does work (and it is ext4, not ext3). I wonder if on this 5.0.2.7 version for SONIC, ext3 partitions would be recognized or not.
P.S.: The CWM 5.0.2.7 I installed was taken from here. And this is the installation guide. Is this the same CWM as the one posted here?
EDIT: I have flashed even this version posted here and still the same problem.... it desn't backup my sd-ext partition. It does backup boot_image, recovery_image, system, data, android_secure, cache but not sd-ext (no sd-ext found).
LBTRAVA said:
Hi everybody. I have installed CWM v5.0.2.7 on my SONIC U8650 smartphone. I'm having a slight problem with this recovery (same occurred with previous version 4.0.1.4). It's not saving the ext partition that I have on the sd card. When I perform a backup through CWM, it skips the saving of sdext as this partition is not being found. Also, with previous CWM version 4.0.1.4, there was an option to manually mount the partition (just in case it is not found at the time of backup) in the "Mounts and storage" option. This option is no longer present in CWM 5.0.2.7 so I can't manually mount the partition (whether this would let CWM recognize the partition and make a proper backup of it). In the end I'm not able to have sdext fully backed up (I resorted at doing a manual backup on my notebook with LINUX with partimage) along with all the other partitions such as /system, /data, /cache etc etc. I therefore wonder if this is a bug and if there's a way to get around this.
I have another smartphone with CWM v5.0.2.3 installed and on this one the backup of the sd-ext partition does work (and it is ext4, not ext3). I wonder if on this 5.0.2.7 version for SONIC, ext3 partitions would be recognized or not.
P.S.: The CWM 5.0.2.7 I installed was taken from here. And this is the installation guide. Is this the same CWM as the one posted here?
EDIT: I have flashed even this version posted here and still the same problem.... it desn't backup my sd-ext partition. It does backup boot_image, recovery_image, system, data, android_secure, cache but not sd-ext (no sd-ext found).
Click to expand...
Click to collapse
Hi dude:
If you wanna sd-ext on your sd card you must follow (exactly) this easy steps.
1- Full format in FAT32 your SD card with Mini Partition 7 (windows) or gparted (linux); per example: Primary FAT32
2- put your sd card into your phone and get into recovery menu.
---go to "mounts and storage" and format this parts:
---/boot
---/cache
---/data
---/sdcard
---/system
3- Go to the beggining of recovery menu and select:
..."wipe data/factory reset"...(say YES)
..."wipe cache partition"...(say YES)
Go to ...advanced ..."wipe Dalvik Cache"...(say YES)
...go back...
5- Go to...advanced...partition SD card (say 512Mb to ext and64Mb to swap)
...go back...
...go to...mounts & storage... mount USB storage...
... conect the phone via USB and pass your favourite ROM to the cellular
6- select "unmount"
7- Go to "Go Back"
8- Select "install zip from sdcard"... "chose zip from sdcard" and select your ROM
10- Say YES and wait untill your ROm is installed
Congratz, now you have your U8650 with custom ROM and ext partition with swap
P.S. I know the steps are some tedious think but, it works at 110% man
Greetings from spain
Please help! Huawei u8652 (At&t Fusion)
Am stuck here with an At&t fusion which a friend purchased a not long ago. He set it up with a lock pattern but unfortunately his colleague took it up and tried more than 5times. Now the phone is asking for the gmail account used to set it up. Which he did not change when he got it. I would like you to give a step by step guide to get the cwm on it in other to flash it with custom rom. The menu can't be accessed so I thought your method would be the best.
klurosu said:
Hi dude:
If you wanna sd-ext on your sd card you must follow (exactly) this easy steps.
1- Full format in FAT32 your SD card with Mini Partition 7 (windows) or gparted (linux); per example: Primary FAT32
2- put your sd card into your phone and get into recovery menu.
---go to "mounts and storage" and format this parts:
---/boot
---/cache
---/data
---/sdcard
---/system
3- Go to the beggining of recovery menu and select:
..."wipe data/factory reset"...(say YES)
..."wipe cache partition"...(say YES)
Go to ...advanced ..."wipe Dalvik Cache"...(say YES)
...go back...
5- Go to...advanced...partition SD card (say 512Mb to ext and64Mb to swap)
...go back...
...go to...mounts & storage... mount USB storage...
... conect the phone via USB and pass your favourite ROM to the cellular
6- select "unmount"
7- Go to "Go Back"
8- Select "install zip from sdcard"... "chose zip from sdcard" and select your ROM
10- Say YES and wait untill your ROm is installed
Congratz, now you have your U8650 with custom ROM and ext partition with swap
P.S. I know the steps are some tedious think but, it works at 110% man
Greetings from spain
Click to expand...
Click to collapse
Sorry for the late reply and many thanks for the tip. I have been using the SONIC so far without the need to restore the system which works fine, so it was not urgent and therefore I kept it as it was, never tried again to overcome the problem. Only a question: does this procedure (different from the one I used) let the system correctly generate the backup of /sdext partition in CWM? Because I don't see why it would work with this procedure and not with my current sdext partition, which I created using gparted on a linux notebook.
Easy as pie, thank you.
Upgrading, Modifying and Unlocking > [U8650] ClockworkMOD v5.0.2.7 for Huawei
I've been having similar problems with creating/saving the partitions. I used a procedure like yours and managed to get the partitions created.
But your write hits it on the head......thanks.
klurosu said:
Hi dude:
If you wanna sd-ext on your sd card you must follow (exactly) this easy steps.
1- Full format in FAT32 your SD card with Mini Partition 7 (windows) or gparted (linux); per example: Primary FAT32
2- put your sd card into your phone and get into recovery menu.
---go to "mounts and storage" and format this parts:
---/boot
---/cache
---/data
---/sdcard
---/system
3- Go to the beggining of recovery menu and select:
..."wipe data/factory reset"...(say YES)
..."wipe cache partition"...(say YES)
Go to ...advanced ..."wipe Dalvik Cache"...(say YES)
...go back...
5- Go to...advanced...partition SD card (say 512Mb to ext and64Mb to swap)
...go back...
...go to...mounts & storage... mount USB storage...
... conect the phone via USB and pass your favourite ROM to the cellular
6- select "unmount"
7- Go to "Go Back"
8- Select "install zip from sdcard"... "chose zip from sdcard" and select your ROM
10- Say YES and wait untill your ROm is installed
Congratz, now you have your U8650 with custom ROM and ext partition with swap
P.S. I know the steps are some tedious think but, it works at 110% man
Greetings from spain
Click to expand...
Click to collapse
Worked for me, thanx.
Now running Fundowsky 4.1.1 Rom
klurosu said:
- Unrar "Huawei U8650.rar ClockworkMod 5.0.2.7."
2 - Turn off your cell phone battery 5sec, so put in again and enter fastboot mode: (VOL- and POWER simultaneously for 25sec)
3 - Connect mobile phone to the PC.
4 - Execute: "ClockworkMod 5.0.2.7 (Bootloader-Volum DOWN + POWER)"
5 - Run "reboot" (even DO NOT take the cable)
6 - You are now in ClockworkMod 5.0.2.7
(if windows do not find the drivers, look them in the folder "Drivers for Huawei U8650")
Click to expand...
Click to collapse
It's a really simple guide but download link is broken, please help
useless download link
download link doesn't work anymore
PLZ change it.

Galaxy Pocket S5300 MAK-DROID Help Needed

Hello guys, couple days back I quit smoking so i had some spare time and I thought I could improve my 1st android phone. Well, I am smoking this very moment and I have a very nice paperweight on my desk.
ROM: t=1873652
I've tried installing the ROM, but it didn't work. I've done everything exactly as in the tutorial, but I got stuck.
So I got past these steps:
* Download the CWM for pocket from here
* Copy update.zip into your internal memory
* Go to recovery mode (Vol-up + Home + Power)
* Choose apply Update from SD card
* Select update.zip file
* Wipe data factory reset,
* Wipe Cache data
but then I tried installing the ROM itself from the SD card I got the error "E:Can't mount /sdcard/"
I can't cancel the installation or boot my system, I don't have a data cable, although I have a card reader if that helps. My android was on the S5300XXLF5 stock firmware and I am using CWM v5.0.2.8. Oh and everytime I try to reboot the device from CWM menu it just freezes all I'm seeing is the console with the "Rebooting..." at the bottom of it.
What should I do now? I want to either get this ROM working or just getting my phone to work with any firmware - any help would be greatly appreciated, thanks in advance.
update1
I get an error even before that, it pops up during "Data Factory Reset" procedure:
E: format_volume: make_extf4fs failed on /dev/block/mmcblklp2
Formatting /sdcard/.android_secure...
Error mounting /sdcard/.android_secure!
Skipping format...
Data wipe complete.
oh and BTW, CWM getting stuck in the "rebooting..." stage is a perk of this build apparently...
Where did you get your ROM? Did you download the Mak-Droid ROM?
Copy the zip file to your sdcard. After you get the CWM running, you proceed to installing your new ROM. Read the instructions carefully.
And if you are stuck in rebooting, if you read the instructions- it tells you to manually reboot by pressing the power button. After this reboot, it will go back to the original MOD the you reboot again.
This should work for you...
I had the same experience. Just manually reboot the phone.
It is stated on the instructions that the reboot option on CWM for galaxy pocket doesn't work as of now.
Sent from my GT-S5300 using xda app-developers app
cubion said:
Where did you get your ROM? Did you download the Mak-Droid ROM?
Copy the zip file to your sdcard. After you get the CWM running, you proceed to installing your new ROM. Read the instructions carefully.
And if you are stuck in rebooting, if you read the instructions- it tells you to manually reboot by pressing the power button. After this reboot, it will go back to the original MOD the you reboot again.
This should work for you...
Click to expand...
Click to collapse
i have followed all the instructions carefully and i believe i meet all the requirements.. the FW is S5300XXLF5 but i encounter a different error.. it says:
installing update...
E:Error in /tmp/sideload/package.zip
(status 2)
Installation aborted.
HELP??
did you use cwm?
try to wipe cache and data after flashing then proceed to installing makdroid..lets see if everything will be fine now..
leonard1928 said:
did you use cwm?
try to wipe cache and data after flashing then proceed to installing makdroid..lets see if everything will be fine now..
Click to expand...
Click to collapse
The cwm is the update.zip right?? If it is, i already used it..
.Update from sd card
.chose update.zip
.data wipe
.cache wipe
.update from sd card
.chose the makdroid.zip
Here comes the error
:'(
Video clip
erikkk07 said:
The cwm is the update.zip right?? If it is, i already used it..
.Update from sd card
.chose update.zip
.data wipe
.cache wipe
.update from sd card
.chose the makdroid.zip
Here comes the error
:'(
Click to expand...
Click to collapse
Suggestion: Maybe someone that flashed with makdroid successfully can make a short video clip and post it on youtube
You just have problem with your sd... Just buy a new one...
CWM E:Can't mount /sdcard/
* Download the CWM for pocket from here
1. Copy update.zip into your internal memory
2. Go to recovery mode (Vol-up + Home + Power)
3. Choose apply Update from SD card
4. Select update.zip file
5. Wipe data factory reset,
6. Wipe Cache data
7. Install from SD card
8. Choose GT-S5300_MAK-DROID.zip & install
* Please wait
9. Reboot system now (Hold the power key for restarting the phone)
10. Again restart system now
* Done (Thanks for read & follow carefully)
Click to expand...
Click to collapse
I got my problem in step #7 when i click the install from SD card it has an error and it says "E:Can't mount /sdcard/", I also tried to go in Mount and Storage Menu i click the mount/sdcard and it has also an error saying "Error Mounting Sdcard" any help please
dashboard07 said:
I got my problem in step #7 when i click the install from SD card it has an error and it says "E:Can't mount /sdcard/", I also tried to go in Mount and Storage Menu i click the mount/sdcard and it has also an error saying "Error Mounting Sdcard" any help please
Click to expand...
Click to collapse
use for internal sd card
dont use ext sd card ( micro sd )
because this phone doesnt have fully compatible with CWM yet
hope helps =)
place your zip file in sdcard bro,not at ext sdcard
and try to flash it properly and right way
the files paced in sdcard/phone memory
1.update.zip(root)
2.cwm
3.deodex(if needed)
4.custom rom
Enjoy the mak-droid rom:good:
Clear dalvik cache too
Sent from my GT-S5300 using xda app-developers app
If you applied update.zip after that - 1)put the file on the root (I.e when you open my files the first page that appears)
2)reboot to cwm
3)wipe data/factory;wipe cache partition;and go to advanced and select wipe dalvik cache
4)now go back and select install zip from sdcard
5)choose the file and select yes
6)wait installing....completed
7)reboot
Wait 2-5 min to load the rom and then enjoy..
Sent from my GT-S5300
Please can someone help I just rooted my phone and while flashing with vm00.zip I can't backup galaxy pocket stock rom. It says error /data.
Sent from my GT-S5300 using xda app-developers app
Maybe your memory is not enough try after clearing your memory or try other version
.:beer:
Sent from my GT-S5300 using xda app-developers app

[Q] Galaxy Gio bricked need help !

Hi all,
I got sick of Android 2.3.3 on my Samsung Galaxy Gio so I decided to root it and install CM 10.2. I followed a trusted root precedure and ended up with my Galaxy Gio beeing rooted. Then I went on to installing Clockworkmod (again using a trusted method).... I followed the guide exactly, but the only problem I ran into was that I didn't have a "root" section/folder on my SD card... So I just put it into the card with all the other files (not into any folder) . I ended up with "Superuser" installed and I then installed "Rom Manger" and gave it superuser permitions. Then I went on to installing the ROM (again following a guide) . I transfered CM 10.1 ( for my device) and gapps 10.1 and put them into the SD card. I entered into recovery mode but for some reason I didn't enter itno Clockwork MOD ( I noticed no change in the recovery esthetics, but I carried on anyway...) I went onto part 8. - Backup and Restore but didn't see that option so I skipped it.. (I know I should've stopped here :crying: )... ) so I went onto part 9. - Wipe Data/ factory reset so I did that and then went onto "apply update from sdcard". I selected CM 10.1 but it "aborted" so I tried again and then again and in the end ( after no succes) I decided to "reboot system now" but after multiple tries I never got past the Galaxy Gio "loading screen" . Then I got really frustrated and tried to undo things by randomly flashing gapps, CM 10.1, the Update.zip (which I used for the rooting) and then I wiped the Cache... All leeded to nothing and now my device is bricked Please give me some advice
Thanks !
First thing: Keep calm.
Second: It's not bricked
So: You havn't installed CWM Recovery, right? Put the update.zip(clockwork mod recovery zip file) onto your sd card -> run up recovery mode on your phone -> choose "apply update.zip"(or sth like this) and select the update.zip -> since you followed up guides you know that you need to format your phone's partitions to ext4 format so you probably have "ext4formatter.zip" file from our MMB team, install it using "install zip from sd card" in recovery -> restart recovery -> "wipe data/factory reset", choose "wipe data/factory reset" -> find "format system" command and use it too -> choose "install zip from sd card" again and flash CM rom -> wipe data again -> done, should work.
A6ekAK said:
First thing: Keep calm.
Second: It's not bricked
So: You havn't installed CWM Recovery, right? Put the update.zip(clockwork mod recovery zip file) onto your sd card -> run up recovery mode on your phone -> choose "apply update.zip"(or sth like this) and select the update.zip -> since you followed up guides you know that you need to format your phone's partitions to ext4 format so you probably have "ext4formatter.zip" file from our MMB team, install it using "install zip from sd card" in recovery -> restart recovery -> "wipe data/factory reset", choose "wipe data/factory reset" -> find "format system" command and use it too -> choose "install zip from sd card" again and flash CM rom -> wipe data again -> done, should work.
Click to expand...
Click to collapse
Hi. The real problem here is that I can't "install zip from sd" - I just don't have the option in the recovery and Clockwork mod recovery didn't boot up I just can't do it.. And I don't have an "ext4formatter,zip"
Please read this topic: http://forum.xda-developers.com/showthread.php?t=1421650
Download version 5.0.2.7
After installing cwm just flash rom, it MUST work - otherwise you're doing something wrong.
Got it !
A6ekAK said:
Please read this topic: http://forum.xda-developers.com/showthread.php?t=1421650
Download version 5.0.2.7
After installing cwm just flash rom, it MUST work - otherwise you're doing something wrong.
Click to expand...
Click to collapse
Thnx allot man finally worked !!:good:
I have the same problem.
Afterlife737 said:
Thnx allot man finally worked !!:good:
Click to expand...
Click to collapse
I really don't know how to install those files when i can't open recovery mode and my PC don't recognize the phone.

[Q] Problem with flashing a rom.

Hey guys, i'm a beginner that wanna to flash a rom to my galaxy w. From http://forum.xda-developers.com/show....php?t=2780150 , the instruction given was
Use latest CWM
Wipe data/factory reset
Format system
Format Sdcard0
Install the ROM
Install gapps
but then in my recovery page, i only have wipe data and wipe cache option, don have format system and format sdcard option, how?
tanchinyan said:
Hey guys, i'm a beginner that wanna to flash a rom to my galaxy w. From http://forum.xda-developers.com/show....php?t=2780150 , the instruction given was
Use latest CWM
Wipe data/factory reset
Format system
Format Sdcard0
Install the ROM
Install gapps
but then in my recovery page, i only have wipe data and wipe cache option, don have format system and format sdcard option, how?
Click to expand...
Click to collapse
Check in mounts and storage.
Harakhti said:
Check in mounts and storage.
Click to expand...
Click to collapse
Thanks, btw I needed to put the rom zip file inside the sdcard in order to install, but after i format the sdcard0, the zip file wont be wipe out?
tanchinyan said:
Thanks, btw I needed to put the rom zip file inside the sdcard in order to install, but after i format the sdcard0, the zip file wont be wipe out?
Click to expand...
Click to collapse
It will be. You can mount the phone in mass storage mode with "Mount USB storage" to copy the zip over after, however. Most people here use an external SD (sdcard1).

I cant flash rom

I did not update since i buy. It is 2.3.6 gt8160.
http://forum.xda-developers.com/galaxy-ace/ace-2-develop/rom-cyanogemod-13-sergeyl-t3277418 i like this rom, i want to install but i am not sure about steps. I tried a lot of things but now it is staying on a screen in recovery mode.
FÄ°rstly i need root.
so i tried this http://forum.xda-developers.com/showpost.php?p=27610432&postcount=31
are there any ways because i couldnot manage with this.. After
3) Switch off the phone and enter to download mode ("Vol Down + Home + Power").
Wait until the driver will be installed and Odin will recognize the phone!
it stays in downlading please dont turn off targe.t
After root, i want to install CWM because i know it from my previous phone. i used it. to install it, i will use this
http://forum.xda-developers.com/showthread.php?t=2141395
is it correct? after root , i should do this.
and after those 2 installations, i can flash rom
http://forum.xda-developers.com/galaxy-ace/ace-2-develop/rom-cyanogemod-13-sergeyl-t3277418
with those steps. RighT?
1. Download CM13 and GAPPS files
2. Copy the zips in the external memory card
3. Boot in CWM or TWRP recovery
4. For CWM: Select "Wipe Data / Factory Reset" - "Wipe cache" - "Wipe Dalvik"
5. Choose "Install Zip from external storage"
6. Select CM13 file
7. Choose "Install Zip from external storage"
8. Select GAPPS file
9. Go back to the root of the CWM, and select "reboot system now"
10. Done! First boot takes a while, be patient
11. Ignore message about SD card after CM13 first boot:
Formatting SDcard as internal storage will ruin it (don't format / encrypt)
Please give me suggestions if i am doing wrong.

Categories

Resources