[Q] Samsung Note II N7105T Broken - Galaxy Note II Q&A, Help & Troubleshooting

Hey All,
I have a current predicament on my hands.. I have a N7105T that I had rooted and I noticed my TWRP was out of date..So I decided to update it using an app I downloaded from the play store (Name has been lost to me) but it downloaded it and installed and updated..But I had presumed that something had gone wrong because It didn't reset on its own, so i reset it myself and after that it wouldn't load and was stuck on the boot screen (Where it tells you what phone you have)
I looked on here and found a solution, downloaded Odin and a restore TAR for my particular model..after that successfully worked I then decided to try and install a new rom on my phone...Well that was a bad idea, I did as was instructed wiped the data etc: clean installation..but for some reason it kept failing to install..
So now I cant even get into the Boot Manager and all its showing is that there was a problem with the firmware and to use Kies to fix it up, So I downloaded a stock rom from sammobile and followed the instuctions to load the rom onto my phone from another topic on this site...
It is now constantly failing when I try and use Odin to load the rom...It just hangs and then says failed in red.
I am stessing because I really need my phone and I know I should have just left it working but I like to try and experiment but unfortunately it has backfired on me.
I have the samsung drivers installed and I have one stock rom for my particular phone but I am in the process of downloading an older version.
My Provider is Telstra.
I hope I have provided enough info and not rambled on too much.
Regards
Justin

I had the same problem with you... I've learned that I shouldn't trust thing I don't download my self and read what it says.....
Anyways what I would suggest is go to twrp website and download the .tar of the recovery and use Odin to install it on to your phone and see if you can get into the recovery mode
(Volume down+power or volume up+home+power)
If that does the work install Kies onto your phone and under tools -》firmware upgrade and initialize (note you should only do this as your last resort since it'll put a boot loader that you won't want onto your phone
Gl
Sent from my SGH-I317M using Tapatalk

lil-devil said:
I had the same problem with you... I've learned that I shouldn't trust thing I don't download my self and read what it says.....
Anyways what I would suggest is go to twrp website and download the .tar of the recovery and use Odin to install it on to your phone and see if you can get into the recovery mode
(Volume down+power or volume up+home+power)
If that does the work install Kies onto your phone and under tools -》firmware upgrade and initialize (note you should only do this as your last resort since it'll put a boot loader that you won't want onto your phone
Gl
Sent from my SGH-I317M using Tapatalk
Click to expand...
Click to collapse
Ok...First I thank you for the help with Twrp
I have installed a stock rom from sammobile, I have got Twrp working but I have some problems atm
1. I cannot copy files onto my External SD Card
2. My Phone Memory is showing as Minus Storage
3. My Sim Card cannot be read from my phone.
Would you know of any fixes for these issues

Really wish I can help you but my best suggestion is to use Kies and do the firmware upgrade. ....
Sorry~
Sent from my SGH-I317M using Tapatalk

Related

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!
No recovery stuck on bootloop
im having the same issue could you post that dropbox link again
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?
louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
my friend 's L900 bricked too ,but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ? my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ? from Pit ? bootloader ?PDA ?PHONE ? or others ?
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ,but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ? my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ? from Pit ? bootloader ?PDA ?PHONE ? or others ?
Sent from my SPH-L900 using xda app-developers app
yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse
hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse
rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help
yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).
Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it

[Q] Stuck in Boot Loop

I'm new to Android and tried to flash a customer ROM and am now stuck in a boot loop. Any help will be appreciated and I'll try to explain myself the best I can.
1. I have a Bell Note 2 and rooted with the CF auto root process
2. I upgraded SuperSU after the root reboot and installed the reboot checker. it said i was rooted.
3. I used titanium backup to backup candy crush
4. I installed ROM Manager and installed ClockWorkMod Recovery. My Note 2 wasn't supported, but I read that i could use the international version from the list so i did that. Everything said it was successful.
5. I downloaded the DN3 Rom from the forums here and transferred to my SD card.
6. I booted into CWM Recovery and did a backup from the options there.
7. Then I chose to install a customer rom and searched for the zip file on my microSD card.
8. The DN3 splash screen came up and took me through some install screens. I chose everything for the SGH-i317M options during the install.
9. it rebooted and loops between the samsung note II splash screen the CWM recovery 6.0.4.3 screen for a second and continues to loop between the two.
I can't get to the CWM recovery screen. if i try it just keeps looping. I'm sitting in the odin mode screen now and i think i need to install a stock rom. Can anyone point me in the right direction to at least get it working? then i'll need to see what i did wrong. thanks.
So i'm in odin mode and found a stock rom to reinstall. it gets to Modem, then fails so i'm not sure if i grabbed the wrong one. I believe i can install a rom through odin now that i can get to odin mode, is that right? but i can't really find any roms around to load cause all the ones i fond are zip files. Do i need to find an MD5/tar file? and where would i find them?
Try sammobile.com
Thanks for the reply. I tried that but the share for the firmware was no good. I ended up resolving it through Keis emergency firmware update.
AntonovichNS said:
Thanks for the reply. I tried that but the share for the firmware was no good. I ended up resolving it through Keis emergency firmware update.
Click to expand...
Click to collapse
That's good you figured it out yourself...:thumbup:
That's what I was going to recommend to you...
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk

Problems downgrading from 4.3

Hello! I have been flashing roms/kernels for awhile now. I have tried probably 12-15 different roms and beanstalk has been my favorite for awhile now.
Anyway, i decided to revert back to stock so i could update and try stock 4.3. First thing i did was flash stock 4.1.1(i think thats what version it was) firmware with odin. Everything went fine and phone booted up and worked perfectly. So i proceeded to update via software update in the settings menu. My phone updated flawlessly and before i knew it i was on stock unrooted 4.3. Needless to say I did not like the changes, so i decided to go back to the older version.
So, i flashed the stock 4.1.1 firmware with odin again and it was a pass. I then tried to turn my phone back on and it would hang at the samsung logo. So i figured i would restore my old beanstalk backup. I tried to restore it and there was an error. So i rebooted my phone and it hanged on the samsung logo again, only this time there is that little blue cyanogenmod guy there like it used to be when i was running beanstalk. I tried flashing different stock firmwares and now they all fail with odin. I rebooted into recovery and did a data wipe many times and i still cannot boot or flash anything with odin.
I can still get into cwm recovery and download mode. Im thinking that the older stock rom i flashed caused problems because i was on 4.3. Something wrong with the bootloader maybe?
Any help or advice to get this fixed would be great. I still feel there is hope because i can reboot into recovery and download mode.
well nvm, my phone is really screwed now. I read another post and it said to flash a boot image file. I flashed the file and tried to reboot and now the phone wont come on and i cant get into recovery or download mode. =-( now i officially have a paper weight
be there... done that
scorey03 said:
Hello! I have been flashing roms/kernels for awhile now. I have tried probably 12-15 different roms and beanstalk has been my favorite for awhile now.
Anyway, i decided to revert back to stock so i could update and try stock 4.3. First thing i did was flash stock 4.1.1(i think thats what version it was) firmware with odin. Everything went fine and phone booted up and worked perfectly. So i proceeded to update via software update in the settings menu. My phone updated flawlessly and before i knew it i was on stock unrooted 4.3. Needless to say I did not like the changes, so i decided to go back to the older version.
So, i flashed the stock 4.1.1 firmware with odin again and it was a pass. I then tried to turn my phone back on and it would hang at the samsung logo. So i figured i would restore my old beanstalk backup. I tried to restore it and there was an error. So i rebooted my phone and it hanged on the samsung logo again, only this time there is that little blue cyanogenmod guSD there like it used to be when i was running beanstalk. I tried flashing different stock firmwares and now they all fail with odin. I rebooted into recovery and did a data wipe many times and i still cannot boot or flash anything with odin.
I can still get into cwm recovery and download mode. Im thinking that the older stock rom i flashed caused problems because i was on 4.3. Something wrong with the bootloader maybe?
Any help or advice to get this fixed would be great. I still feel there is hope because i can reboot into recovery and download mode.
Click to expand...
Click to collapse
I would first download a fresh version of a rom and the corresponding version of GAPPs and on your computer. Transfer you files onto you misco SD card via the SD card slot on the computer. Boot your phone into recovery and flash them from the /sdcard1 option. Should flash successfully. Then reboot. I always keep spare ROM versions on my removable card for such emergencies. Also, keep a current ROMbackup there as well. Good luck.
Walknmemfs said:
I would first download a fresh version of a rom and the corresponding version of GAPPs and on your computer. Transfer you files onto you misco SD card via the SD card slot on the computer. Boot your phone into recovery and flash them from the /sdcard1 option. Should flash successfully. Then reboot. I always keep spare ROM versions on my removable card for such emergencies. Also, keep a current ROMbackup there as well. Good luck.
Click to expand...
Click to collapse
i tried doing this http://forum.xda-developers.com/showthread.php?t=2549068
but thats not working either. cant get the phone to do anything. wont come on in download mode, recovery...wont come on at all.
debrick
scorey03 said:
i tried doing this http://forum.xda-developers.com/showthread.php?t=2549068
but thats not working either. cant get the phone to do anything. wont come on in download mode, recovery...wont come on at all.
Click to expand...
Click to collapse
hey try another debrick image if you want i can email the one the worked for me,after going in download mode flash cyanogenmod 11 forget about downgrade or stock 4.3 you are stuck just like me your phone wont reboot without the sd card so you gona have to flash modem and bootloader manually here is wher to get it bootloader = http://www.androidfilehost.com/?fid=23212708291681451 modem= http://www.androidfilehost.com/?fid=23212708291681456 put both zip files in the internal storage rebot to recovery remove debrick sd card then flash both zip files wipe cache and dalvin and try to reboot it worked for me .
xjunior said:
hey try another debrick image if you want i can email the one the worked for me,after going in download mode flash cyanogenmod 11 forget about downgrade or stock 4.3 you are stuck just like me your phone wont reboot without the sd card so you gona have to flash modem and bootloader manually here is wher to get it bootloader = http://www.androidfilehost.com/?fid=23212708291681451 modem= http://www.androidfilehost.com/?fid=23212708291681456 put both zip files in the internal storage rebot to recovery remove debrick sd card then flash both zip files wipe cache and dalvin and try to reboot it worked for me .
Click to expand...
Click to collapse
i've tried 3 different debrick images and still cant get the phone to go into download mode. and yes i would appreciate it if you could send me the one that worked for you. thanks man
image
scorey03 said:
i've tried 3 different debrick images and still cant get the phone to go into download mode. and yes i would appreciate it if you could send me the one that worked for you. thanks man
Click to expand...
Click to collapse
download the image here and unzip it then burn with win32diskimager , drive.google.com/file/d/0B4b7I4izs-CwdWFUdFQ2YTNZSU0/edit?usp=sharing remove the battery put it back hold home power and volume down at the same time .
---------- Post added at 07:53 PM ---------- Previous post was at 07:32 PM ----------
scorey03 said:
i've tried 3 different debrick images and still cant get the phone to go into download mode. and yes i would appreciate it if you could send me the one that worked for you. thanks man
Click to expand...
Click to collapse
assuming you have the [email protected] galaxy s3
download the image here and unzip it then burn with win32diskimager , drive.google.com/file/d/0B4b7I4izs-CwdWFUdFQ2YTNZSU0/edit?usp=sharing remove the battery put it back hold home power and volume down at the same time .it wont work for other models [email protected] only but the process is the same only need to find the right file for your phone.
that one didnt work either
scorey03 said:
that one didnt work either
Click to expand...
Click to collapse
It's kind of been a known issue since the day the OTA came out that downgrading the bootloader from the one that comes with 4.3 will hard brick your device. No known fix.

[Q] HELP! I cannot boot or enter Recovery

Ok so today I tried to flash TWRP on my Note II today through the GooManager app from the Play Store, it went well and then asked to reboot. After the reboot it is stuck on the SAMSUNG Galaxy Note II screen in all white, with a black background. I know I should try to flash the stock firmware with Odin but when in download mode (which it can enter but not the Recovery or OS) it is not detected. I have tried on a Windows XP, Vista and 7 computer with no luck on each. I have downloaded Heimdall for my Mac and again it is not detected. I have read that there could be an eMMC problem or something like that but I was working just fine like two minutes ago. Again it will not boot into either the Recovery or OS after sitting there for minutes, I can upload a photo if need be but I dont think its that hard to imagine. Oh I was on OmniRom the release the one before the one released yesterday with CWM. I wanted to update but since i was on CWM i needed to flash TWRP and it was not downloading for whatever reason so i went with the app method, which has worked before on my Xperia X10 so i was semi confident, anyway I'm rambling now... Again if anyone would be able o help me I will buy you a beer! wait I can't I'm underage, well when I turn 21 I'll buy you a beer!
Thanks!
Yoshi5005 said:
Ok so today I tried to flash TWRP on my Note II today through the GooManager app from the Play Store, it went well and then asked to reboot. After the reboot it is stuck on the SAMSUNG Galaxy Note II screen in all white, with a black background. I know I should try to flash the stock firmware with Odin but when in download mode (which it can enter but not the Recovery or OS) it is not detected. I have tried on a Windows XP, Vista and 7 computer with no luck on each. I have downloaded Heimdall for my Mac and again it is not detected. I have read that there could be an eMMC problem or something like that but I was working just fine like two minutes ago. Again it will not boot into either the Recovery or OS after sitting there for minutes, I can upload a photo if need be but I dont think its that hard to imagine. Oh I was on OmniRom the release the one before the one released yesterday with CWM. I wanted to update but since i was on CWM i needed to flash TWRP and it was not downloading for whatever reason so i went with the app method, which has worked before on my Xperia X10 so i was semi confident, anyway I'm rambling now... Again if anyone would be able o help me I will buy you a beer! wait I can't I'm underage, well when I turn 21 I'll buy you a beer!
Thanks!
Click to expand...
Click to collapse
Your phone was on OMNI ROM with CWM recovery, you installed TWRP via goo manager and since then it's not booting up, right ?
I think the easiest option now is to flash stock via ODIN. Did you ever connect your phone using USB ?
Are you trying with the cable that came along with this phone ? I know samsung drivers can get messy, try installing KIES it will automatically install the appropriate drivers, then exit KIES and start odin with Admin right(right click-> Run as Administrator).
If you have a full back-up and if Odin works try flashing CWM first via ODIN and the reboot in to recovery and restore your backup.
ciphercodes said:
Your phone was on OMNI ROM with CWM recovery, you installed TWRP via goo manager and since then it's not booting up, right ?
I think the easiest option now is to flash stock via ODIN. Did you ever connect your phone using USB ?
Are you trying with the cable that came along with this phone ? I know samsung drivers can get messy, try installing KIES it will automatically install the appropriate drivers, then exit KIES and start odin with Admin right(right click-> Run as Administrator).
If you have a full back-up and if Odin works try flashing CWM first via ODIN and the reboot in to recovery and restore your backup.
Click to expand...
Click to collapse
I tried installing Kies, closing it with Task Manager and then using both Odin v3.07 and v1.8.5. With both they never detected my phone, and in Heimdall it still does not recognize my phone. And yes that is exactly what happened.
Oh and Windows finally said something and it said that the usb device connected cannot be recognized...
Sorry fixed it!
Yeah so... The USB cable I was using was broken or whatever so I changed it and yeah its detected, thanks anyway!
Glad to know it's fixed.
Sent from my SGH-T889 using xda app-developers app

[Q] TWRP & No Os On my Samsung Galaxy S3 HELP!

I have Samsung At&T Galaxy S3. I bought it used and it worked fine for days until I dropped it and cracked the screen, However it still worked fine until it died. I plugged it in and went to turn it on and it took me to the Team Win recovery. When I try to go to recovery and then reboot it tells me there is no os installed and asks me if I want to install Super SU. If I go to install it takes me to the Odin downloading mode but that is it. Phone is Bricked and stays at the S III screen. HELP is there any hope for me!? I also tried to follow a forum that instructed the rooting of the phone using ODIN. I tried to use the link but couldn't and then I tried Chain fires way but still after 4 hours NO luck, could be me but I am as "Noob" as they come with this apparently. Can someone please help me!?
What ROM was the phone running before it was dropped? You could copy a custom ROM to a micro SD card and try flashing it from recovery.
Don't worry, your phone is not bricked.
Well, if it happened out of the blue like that, there is a possibility of a hardware problem.
Do as audit13 said and flash a ROM via recovery, preferably the same as what was on it before.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Previous ROM
audit13 said:
What ROM was the phone running before it was dropped? You could copy a custom ROM to a micro SD card and try flashing it from recovery.
Don't worry, your phone is not bricked.
Click to expand...
Click to collapse
I was running I believe the Jelly Bean 4.3...SO I bought the phone from a person. They did not mention it having TWRP or anything else. It I think had something called Super SU too...not sure what that is. I have tried to flash in ODIN. nothing. I have also tried to flash a rom using an SD card it was the kit kat 4.4.4 but it says failed each time. I don't know what to do...
Super SU
DocHoliday77 said:
Well, if it happened out of the blue like that, there is a possibility of a hardware problem.
Do as audit13 said and flash a ROM via recovery, preferably the same as what was on it before.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Click to expand...
Click to collapse
So I bought the phone from another person who failed to mention anything not stock about the phone! It came with I believe the jellybean 4.3 and something like super su. What is super SU? I have tried to flash the kit kat 4.4.4 to the phone with an sd card but it always says failed...I don't understand! I have been going out of my mind and reading and trying a but nothing is working!
SuperSU is part of your root access. Its an app that helps to manage root access from your other apps.
When the flash fails does it give you an error message? Try flashing again, but after it fails do not reboot. Go back to the Advanced menu and choose copy log to SD. Then attach the recovery.log here.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Unsure
DocHoliday77 said:
SuperSU is part of your root access. Its an app that helps to manage root access from your other apps.
When the flash fails does it give you an error message? Try flashing again, but after it fails do not reboot. Go back to the Advanced menu and choose copy log to SD. Then attach the recovery.log here.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yes I get an error message. Ok so I suppose I am still trying to grasp at the entire concept of all of this! So let me start here: I bought the phone as I said and it seemed fine. It didn't however have all the normal Google apps etc. and I wasn't sure why. 2 days later after purchase I dropped the phone. Screen cracked but for the rest of the day it worked fine. It died, I plugged it in at home and when I tried to turn it on it went straight to TWRP. I messed with the phone in recovery NOT understanding what I was doing and I think I may have wiped/deleted the Super SU off my phone, I don't know if it is rooted or anything anymore if it was rooted in the first place. I believe it was running Jellybean before this mess and since then I have tried to do multiple things to it including installing a ROM on an SD with gapps and flashing in TWRP but always get an error message. I did just try installing UPDATE-SuperSu back onto the flashing using an Sd and that installed but still couldn't flash a rom. I still cannot get past the Samsung S III screen and still the phone says no OS. So I suppose is there a way to start from scratch so...someone that can walk me through this. I am dying and DON'T want to spend the money the Phone stores want to fix my phone! I don't have a carrier like Sprint etc. I was using the phone with a sim card for straight talk. Please if I can try this I will! Thanks again for all your help...
Try flashing the MJB firmware via Odin on your computer. That should restore your device to fully working stock, provided there isnt a hardware problem.
Factory reset in recovery, then reboot download mode. Plug into your computer and run Odin v3.09. Click the AP button and select the firmware you downloaded. Should be a .tar.md5 file. Then click start.
You can get odin from my sig if needed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Try flashing the MJB firmware via Odin on your computer. That should restore your device to fully working stock, provided there isnt a hardware problem.
Factory reset in recovery, then reboot download mode. Plug into your computer You can get odin from my sig if needed.and run Odin v3.09. Click the AP button and select the firmware you downloaded. Should be a .tar.md5 file. Then click start.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
So, I tried to do what you said but when I extract the files there is no tar md5 file, if I don't extract I can't see any of the MJB firmware. I don't know what I doing wrong...
Highlight/select all of the files at once. Then right click and extract. It should combine them all into the one.
If you're still having trouble with it, I'll try to do it for you. Been meaning to do this anyway to make things a little easier for folks. But it'll probably be at least Sunday night or Monday before I can do anything. (Funeral/family stuff has me tied up all weekend).
Sent from my SAMSUNG-SGH-I747 using Tapatalk
DocHoliday77 said:
Highlight/select all of the files at once. Then right click and extract. It should combine them all into the one.
If you're still having trouble with it, I'll try to do it for you. Been meaning to do this anyway to make things a little easier for folks. But it'll probably be at least Sunday night or Monday before I can do anything. (Funeral/family stuff has me tied up all weekend).
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
So I have tried SO many things now I can't even remember. I have tried flashing roms via SD card, I have tried to re-root the phone by flashing Super SU from an SD card no luck...I have tried to factory reset using the instructions you posted but upon extracting there is no tar md5 file. lots of others but not that one. My download screen says:
ODIN MODE
PRODUCT NAME: SGH I747
CUSTOM BINARY DOWLOAD: YES (2 COUNTS)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUAULCOM SECUREBOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER RP SWREV: 2
When I try to reboot my phone in TWRP it says, "NO OS" installed are you sure you wish to continue.
I will slide the deal towards yes/reboot and then it will say, "Your phone is not rooted do you wish to install Super SU" I will slide to install and it will go to download mode and look like the above. That's it. No successful flashing via SD or Odin...I am pooped. By the way I appreciate your time, and I am so sorry for your loss.
Still No Luck
DocHoliday77 said:
Highlight/select all of the files at once. Then right click and extract. It should combine them all into the one.
If you're still having trouble with it, I'll try to do it for you. Been meaning to do this anyway to make things a little easier for folks. But it'll probably be at least Sunday night or Monday before I can do anything. (Funeral/family stuff has me tied up all weekend).
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I don't know what happened but I thought I had responded to this, I know its late but please accept my deepest condolences.
As for my phone I have tried EVERTHING I can think of, everything you have suggested as well and nothing is working. I Can download ODIN, I can download files and Md5. tar files but it always says failed...I don't know what to do or anything. I have been working on this for almost 2 months now. I need help, there is no cell phone repair here that can flash software except ONE company and they have a bad reputation...I want to start from scratch here because I am So turned around. I have tried so much I am just confused...If you can help me at all, step by step perhaps then I could get you the answers you need to help me. Really thank you for the time you have already given me.
I suggest using CWM to flash anything. I had issues with TWRP and Philz Touch worked perfectly. I have recommended it to other that had no OS on their phone and they were able to get their phone up and running on a custom ROM.
http://forum.xda-developers.com/showpost.php?p=55897607&postcount=2
I apologize for not responding before. Been hard to keep up with everything lately.
Try as audit13 suggested and flash cwm or philz recovery with Odin. Then reboot recovery and flash a rom. Hopefully one of those will work where twrp failed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Categories

Resources