Develop Bugs

[Q] Unable to flash Stock ROM

I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks

Is it supposed to use T999 firmware?

Only odin flash T999L firmware. I dont see it released yet at samsing-updates.com though.
Maybe samfirmware.com? I can look later.
Sent from my SGH-T999 using xda premium

re: sure fix
newidforu said:
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Click to expand...
Click to collapse
Why not reflash the stock ODIN flash rom and make sure it all works ok for you, that will tell you exactly what the problem is.
If the stock rom is working properly, then there is only one thing left which is the culprit and that is the CM10/AOKP/AOSP
or PORTED roms which many people seem to like flashing.
The CM10/AOKP/AOSP and ported roms are excellent if you are a developer or if you like to do a lot of experimentation with your phone.
So the thing to do now is reboot your phone to recovery mode, do a "Factory Reset", "Wipe Cache", "Wipe System" and "Wipe Dalvik".
When that's done Open Odin and put the stock rooted T999 Tmobile Jellybean 4.1.2 into Odin's PDA slot, go into download mode
and once you see Odin is connected to the phone start the flash. Have patience for the phone to boot after its done flashing.
Here is the stock rooted Odin flash T999 Tmobile Jellybean 4.1.2 rom that you can download if you like: T999_UVDMD5
Official JB Firmware - Latest JB 4.1.2 Firmware
My suggestion to you is to only flash Samsung T999 Tmobile stock based Jellybean 4.1.1 or 4.1.2 roms in the future.
But who am I to say whats best..... This is just my personal opinion...... Which usually is not worth a dime. LOL

Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am a newbie. I thought the T999 was the same as the T999L. That would explain why Odin doesnt flash stock T999 onto my device. Can anyone here post a link to the stock SGH-T999L ROM?

Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.

newidforu said:
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
Click to expand...
Click to collapse
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.

Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I used Odin to flash Clockwork Mod recovery first. I did not like Clockwork Mod's interface and reflashed with TWRP. I had no problems to gain root with either of these methods. I also tried Cyanogenmod stable 10.0.0 and then 10.1 RC2 without any problems. As far as I can tell, all apps work except for the camera. One word of caution though. As you can see from my posts, I am new and dont know what I am doing. I might have just gotten lucky since my device is still unbricked. I had only one "scary" moment during the entire process. I used TWRP to wipe my phone clean and was stuck with no OS install file. ADB sideload did not work since it could not recognize the device at that point. Luckily, I had a micro SD card lying around and was able to put in a new OS install file using my laptop and then TWRP was able to handle it.

tsticge aye
faytx1 said:
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Click to expand...
Click to collapse
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414

newidforu said:
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
Click to expand...
Click to collapse
Here is the cameradata folder from the T999L.
http://d-h.st/Ciy
Good Luck!

How did you get Cyanogenmod installed on the t999l every time i try it aborts with status 7

Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app

Beefstew said:
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You reverted to stock on the T999L? please exspain how that was done

Re flashed stock ROM using Odin. I believe I got the file from Samsung's website, but I'm not positive of that. I do know its huge, over 1 gig. If you need help with the re flash I know there are already how to's on here about that, so I won't go into it here.
Sent from my SGH-T999 using xda app-developers app

You must be using a T999 as your sig indicates, not a T999L. Am I correct?
Sent from my SGH-T999 using xda premium

Don't I feel like a tool now. Yes Doc, plain old t999 here. Now that I read back through the whole thread here I see that I was being a bit redundant. Now I will return to my closet under the stairs.
Sent from my SGH-T999 using xda app-developers app

No worries! We all do stuff like that from time to time!
Sent from my SGH-T999 using xda premium

T999L - Pull Recovery before Rooting??

Hey Guys,
I know it is probably not possible, but in case it is, I wanted to post the question.
I have been working with MotoDefier for a few days now learning about the new model S3 (SGH-T999L). Because there is no firmware available for download yet, we are trying to find a way to either pull the stock recovery before rooting, or figure a way to root without flashing CWM or TWRP first.
The ultimate goal here is to pull all of the parts that are included in firmware updates, and create the firmware from there. This way, if anyone runs into problems, they will be able to Odin back to stock.
Moto has already tried several different rooting methods, including CF-AutoRoot, and has had no luck so far. So if anyone has any ideas on how we can get this done, please do share!
Thanks!
Doc

This may be out of place but perhaps the 999l is closer recovery to the s4? I don't know. But have you tried to pull it with the paid version of the s3 toolkit?
I wish I could help. Sorry Doc
Sent while sleeping in chair.

Doesnt the toolkit flash recovery though? Ive never actually used it. Ill look into it though, thanks.
As far as it being closer to the S4, im just not sure. I do know you can root by flashing the T999 CWM or TWRP, then superuser. Plus.from what I see the overall layout is the same as the original T999.
Thanks for the reply!
Sent from my SGH-T999 using xda premium

I don't have an answer for your question, but wouldn't the only way be through flashing an insecure kernel (exploit)? Then you could push SU and you would have your recovery. But then you lose the kernel.
Can't you download the firmware through Kies? I know it's not on sammobile, but I would think that Kies would be able to restore the factory image. The prospect of Kies not being able to do this is ridiculous. If that's the case, it's even more useless than I previously thought.

Aerowinder said:
I don't have an answer for your question, but wouldn't the only way be through flashing an insecure kernel (exploit)? Then you could push SU and you would have your recovery. But then you lose the kernel.
Can't you download the firmware through Kies? I know it's not on sammobile, but I would think that Kies would be able to restore the factory image. The prospect of Kies not being able to do this is ridiculous. If that's the case, it's even more useless than I previously thought.
Click to expand...
Click to collapse
I was actualy thinking the same thing about the kernel. Just sent a PM to one of the guys who already rooted to see if they would pull the boot.img for me. Im not worried about losing the kernel, as I will still have the original copy after setting it to insecure.
Moto already tried getting the firmware through kies, but it didnt work. We figure that its because there is no publicly released firmware to begin with. As to the uselessness of Kies......completely!
.......I was just thinking, when you flash CM, it flashes its own kernel with it, right? (Its been a long time since Ive messed with CM, sorry). If thats the case, i wont be getting the kernel from the guy I PM'd.
Does anyone else have the new model T999L? If so have you rooted yet, or do you plan to? If so, please PM me if you are willing to help us out with this.
And by all means, hit me with any other ideas you guys may have!

Yes, it flashes it's own battery hog kernel.

Well, I hope I dont jinx anything by announcing too early, but I think we got it!
It appears that using the motochopper exploit did the job. It was originally created for a Motorola device, but as it turns out it will work on a number of Qualcomm based devices.
I got the info from the S4 forums.
It appears the main thread is in the ATT forum here:
http://forum.xda-developers.com/showthread.php?t=2252248
Here it is reposted in the Tmobile S4 forum:
http://forum.xda-developers.com/showthread.php?t=2258633
Just wanted to share in case anyone's interested in taking a look.
Note: it looks like the latest updates may have been patched against this exploit. Just fyi.
Sent from my SGH-T999 using xda premium

I love you Doc. (Hetero)
Sent while sleeping in chair.

Lol!
Be sure to hit thanks when you see MotoDefier. He took all the risk and did all the hard work! I mostly just helped with ideas and such. (Most of which didnt work!)
Ill be working tonight and tomorrow on getting some sort of flashable firmware put together so you guys have a way back to stock if need be.
Also I have a deodexed rom based on the T999L almost ready in case anyone wants to mess with it. Just got to double/triple check my work and test first. There are a few differences from the original T999 so im curious to see if any of it is noticeable while its running.
Let the fun begin!
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Doesnt the toolkit flash recovery though? Ive never actually used it. Ill look into it though, thanks.
As far as it being closer to the S4, im just not sure. I do know you can root by flashing the T999 CWM or TWRP, then superuser. Plus.from what I see the overall layout is the same as the original T999.
Thanks for the reply!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
What I meant was pulling files from device without pushing anything to it. I believe this is an option within the toolkit, not sure if paid version required. Hmmm.
Sent from my Transformer Prime TF201 using xda premium

What I was getting at, was that we didnt want to use the toolkit because it flashes recovery. And I could be mistaken, but Im pretty sure the toolkit requires you to root first, then it can pull system firmware for you. Either way though, we got what we needed. I am uploading files now and will post shortly.
Note that most of what I am doing is currently untested. I do not have a T999L, and I dont want to take the chance of flashing certain parts of the T999L to it. I am confident that it will work, or i wouldnt release any of it, but just for full disclosure.....!

I dont believe it needs root and it wont do anything you dont want it to do unless you tell it to do it. All of that aside, I wasnt trying to pimp the toolkit, I just thought it might work, but as I have little knowledge about that which I am talking, I'll just defer to you fellows as you seem to know a thing or two about a thing or two.
:screwy:
Sent while sleeping in chair.

I have the T999L, I used the Toolkit to flash TWRP and then updated it to 2.5.0.0 from Doc's page, I then flashed SuperSU 1.30, wiped Cache and Dalvik, then rebooted. Bam, Rooted. But it not 100%, ROM Manager doesn't seem to have root, but Adfree Android, TiBackup and ES File Explorer. I'm going to uninstall ROM Manager and then reinstall to see if that helps.
Thanks again to DocHoliday77 for his help.
EDIT: I found out why ROM Manager was failing, BusyBox was not installed. I installed it and everything works.

T999L Roms

As of right now i can install any Rom from the T999 that does not require the new boot loader upgrade but i get a status 7 when i try to install the newer roms is there any boot loader for the T999L that supports the Roms

Edit the update script of the zip files to remove the bootloader asserts.

Aerowinder said:
Edit the update script of the zip files to remove the bootloader asserts.
Click to expand...
Click to collapse
How would i do that

There are lines in the with in the roms.zip
meta-inf>com>google>android>updater-script>
assert(getprop("ro.bootloader") =="t999.......) and the three other bootloaders it checks for.
I'm guessing you can remove these lines and rezip and it will flash, but I am not going to do so, and don't plan on trying... I can remove those lines and rezip it for you to try and flash and see how it goes. I would put 20$ down that it won't harm the phone but not 600 (new) or 180 (insurance) lol.

Until someone else tries i will wait

I edit lines in there when roms fail to install cause they are specific to att, just incase anyone else really wants it, just post and let me know. I'm off til Thursday so I have time at some point each day to do so. if anyone with more knowledge wants to confirm let me know, so that there is more comfort to this.

If you could edit it out that would be nice and upload the new package that would be nice

Bray90820 said:
If you could edit it out that would be nice and upload the new package that would be nice
Click to expand...
Click to collapse
I'll work on it in a little bit. Got to do one for an att rom I wanna try anyways. What rom did you wanna try?

Cyanogenmod 10.1 RC4

Wait are you going to be editing the rom or the bootloader

Updater Script in the .zip for the rom.

I was actually looking for the bootloader so i could install whatever rom i wanted

Bray90820 said:
I was actually looking for the bootloader so i could install whatever rom i wanted
Click to expand...
Click to collapse
Ohhhhh not possible yet. And if I remove those and it installs fine, you may still run into errors cause the CM team asks for people to be on the latest bootloaders to have it run no issues.
I'm sure your phone will be apart of the CM/AOSP builds soon enough.

Well I do have RC2 on it right now

That was before all the changes. My personal favorite

I Guess i'll just wait then

Bray90820 said:
Well I do have RC2 on it right now
Click to expand...
Click to collapse
How did you install this? Did you edit the updater-script or did it just flash over?
I'm using TWRP on a T999L and am looking to go custom ROM with CM10.1, but am trying to find more info. I know that I can always go back since @DocHoliday77 & @MotoDefier got the stock ROM all squared away: http://forum.xda-developers.com/showthread.php?t=2308514

DJ_SpaRky said:
How did you install this? Did you edit the updater-script or did it just flash over?
I'm using TWRP on a T999L and am looking to go custom ROM with CM10.1, but am trying to find more info. I know that I can always go back since @DocHoliday77 & @MotoDefier got the stock ROM all squared away: http://forum.xda-developers.com/showthread.php?t=2308514
Click to expand...
Click to collapse
The d2tmo has been updated tir the T999L and the latest nightly is fully working without any modifications needed

Awesome!! Thanks, I was thinking that I might have to flash the ROM then flash the T999L modem. What date are you using? Any issues?
Sent from my SGH-T999L using xda app-developers app

DJ_SpaRky said:
Awesome!! Thanks, I was thinking that I might have to flash the ROM then flash the T999L modem. What date are you using? Any issues?
Sent from my SGH-T999L using xda app-developers app
Click to expand...
Click to collapse
No issues on june 18th

[Q] Brand new sprint gs3

I recently bought, and finally rooted my sprint sph-l710. I have flashed two roms, hyperdrive, and moar roms. My problem is that i cant flash anything else, only those two roms. Is there a fix?

bigchuq said:
I recently bought, and finally rooted my sprint sph-l710. I have flashed two roms, hyperdrive, and moar roms. My problem is that i cant flash anything else, only those two roms. Is there a fix?
Click to expand...
Click to collapse
What do you mean you can't flash anything else? When you flash, are you wiping everything clean each time before flashing ROMs or are you dirty flashing?

tkepk181 said:
What do you mean you can't flash anything else? When you flash, are you wiping everything clean each time before flashing ROMs or are you dirty flashing?
Click to expand...
Click to collapse
yes, i'm wiping everything, whenever i try to install any other rom i have some type of error. i'm new to this so please excuse my noobness. i've tried to flash a stable cm10, among others with no luck.

Do you have the md4 boot loader?
Sent from my SPH-L710 using xda app-developers app

The new S3 have been modded by Sprint /Samsung and require a modded recovery in order to mount storage. The other issue is that you can not flash an aosp style rom. You should be able to flash any TW rom but it won't allow aosp roms to flash. None of the developers have a new S3 so until someone gets one ir someone volunteers one this won't be solved.
Remember search is your best friend, Have a great day!

IDontKnowMang said:
Do you have the md4 boot loader?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I believe so, but i'm not sure is that @ the end of the build number? If so, yes

bigchuq said:
I believe so, but i'm not sure is that @ the end of the build number? If so, yes
Click to expand...
Click to collapse
If your getting a status 7 error that is the bootloader error flash this in recovery it will update all your firmware and bootloader. http://db.tt/Qt6NcH0a
After flashing this make sure you reboot the phone then try going back into recovery and flashing the rom you want.
Remember search is your best friend, Have a great day!

Is this still a legit fix even after the 4.3 upgrade?
I just tried this and now my phone wont even power on.

[Q] Remove Knox Security//

Hello s3 users i just upgraded to this phone and it came with 4.1.2 so i rooted it of course and next thing you know my 3yr old somehow updated phone to 4.3:crying::confused i still have root but if i uninstall knox security will it jack my phone up or brick it also is the bootloader locked or not on this model just need clarfication.or do i just use xda member cLogic instructions and reroot and remove knox..

I'm not too sure but if I recall correctly this doesn't stop you from rooting. Anyone else care to chime in with your expertise? @DocHoliday77
Edit : upon reading the thread by cLogic I'm sure this works. It sounds logical, and his method makes sense and others have posted in the thread. Make sure you follow the instructions properly.
Sent from my Nexus 5 using XDA Premium 4 mobile app

Bootloader is not locked, and the easiest way to get rid of knox imo is to flash the root66 firmware. There are flashable scripts out there that do so as well, but ive never used em so I dont know how thorough they are.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Bootloader is not locked, and the easiest way to get rid of knox imo is to flash the root66 firmware. There are flashable scripts out there that do so as well, but ive never used em so I dont know how thorough they are.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
If i just use the Knox removal zip in twrp i will work?? Also i can flash roms then right
Sent from my SGH-T999 using XDA Free mobile app

No need to use any removal method if your going to flash a rom. Afaik all roms already have it removed. But if you want to remain on your current build but remove knox, yes flash the removal as per instructions where you find it. (I think theres one in AT&T forums that might be easier to find).
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
No need to use any removal method if your going to flash a rom. Afaik all roms already have it removed. But if you want to remain on your current build but remove knox, yes flash the removal as per instructions where you find it. (I think theres one in AT&T forums that might be easier to find).
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Root T999 (variants) on android 4.3 AND remove knox
:good:

Forgot about that one! Thanks! It is old though so as I said before I dont know if itd be a complete removal on NC2 firmware. It should be fine, but no guarantees.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Forgot about that one! Thanks! It is old though so as I said before I dont know if itd be a complete removal on NC2 firmware. It should be fine, but no guarantees.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
ok..so i uninstalled with knox removal zip.Im running 4.3 ota rooted twrp 2.6.3 can i install any t999 rom or only 4.3+ up because i seen somewhere on here you cant install older builds because the bootloader on 4.3 dont play well with older builds

You can flash older roms just fine. As for if they'd be better or worse on 4.3 firmware I'm not sure. Should be ok though, depending on how old you want to go. The further back, the more likely it is you might see some issues, but not many have done this so I can't say for sure.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
You can flash older roms just fine. As for if they'd be better or worse on 4.3 firmware I'm not sure. Should be ok though, depending on how old you want to go. The further back, the more likely it is you might see some issues, but not many have done this so I can't say for sure.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Well im not trying to go too far back just 4.1.2 roms like liquid smooth,cm,etc..Thanks for being patient..

That should be fine.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
That should be fine.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Thanks:good:..One more thing,ok im running stock 4.3 rooted build uvuenc2 t999 twrp recovery 2.5.0.0 i read that i cant restore backup with twrp do i overwrite twrp with cwm to backup or what also while backing up in twrp do i backup boot,cache or just system,data,etc..

System - rom
Boot - kernel
Data - (apps, settings, etc)
I use twrp 2.7.0.0 and have no issues. Haven't used cwm in several years. Yours is very old though. If you dont update it it will probably give you problems.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
System - rom
Boot - kernel
Data - (apps, settings, etc)
I use twrp 2.7.0.0 and have no issues. Haven't used cwm in several years. Yours is very old though. If you dont update it it will probably give you problems.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
ok..whats going on i done tried 3 or more versions of twrp and i cant install cm10,11 etc..install failed getprop(ro.bootloader) error updating binary in zip.t999UVDLJC/T999UVDMD5/T999UVUEMJC/T999VVLDLL1/T999LUVAMB7/T999VVLDMF2/T999VVLUEMK5/T999LUVUBMK4.whats does this mean..

WelfareBaby said:
ok..whats going on i done tried 3 or more versions of twrp and i cant install cm10,11 etc..install failed getprop(ro.bootloader) error updating binary in zip.t999UVDLJC/T999UVDMD5/T999UVUEMJC/T999VVLDLL1/T999LUVAMB7/T999VVLDMF2/T999VVLUEMK5/T999LUVUBMK4.whats does this mean..
Click to expand...
Click to collapse
CM still hasnt bothered to update their updater-scripts to include the latest firmware builds. You will have to manually edit the script and either delete ALL "assert" lines, or add your firmware build to it.

DocHoliday77 said:
CM still hasnt bothered to update their updater-scripts to include the latest firmware builds. You will have to manually edit the script and either delete ALL "assert" lines, or add your firmware build to it.
Click to expand...
Click to collapse
Well i also tried to flash a different rom using twrp 2.7.0 t999 4.3 and got the same error??and also where could i find a good editing script tried 7zip but it came with malware so had to delete.I really like cm and want to try.

Use Notepad++ for editing the script. Get it here: http://notepad-plus-plus.org/
Get 7-zip from here: http://7-zip.org
Not sure where you got yours if it says its malware. I've been using it for years with zero issues and believe it can be trusted. Just extract the contents of the rom, find the updater-script in the meta-inf folder tree and edit with notepad++. Also delete the signatures if they are present (3 files in the meta-inf folder). Some roms have them, some dont. CM probably does.
There are many roms out there that have not been updated to include the latest firmware builds. You more than likely got another one like it.

DocHoliday77 said:
Use Notepad++ for editing the script. Get it here: http://notepad-plus-plus.org/
Get 7-zip from here: http://7-zip.org
Not sure where you got yours if it says its malware. I've been using it for years with zero issues and believe it can be trusted. Just extract the contents of the rom, find the updater-script in the meta-inf folder tree and edit with notepad++. Also delete the signatures if they are present (3 files in the meta-inf folder). Some roms have them, some dont. CM probably does.
There are many roms out there that have not been updated to include the latest firmware builds. You more than likely got another one like it.
Click to expand...
Click to collapse
..Finally was able to remove asserts and flash cm10.2 up and running really smooth you deserve all credit up until yesterday i never used 7zip or notepad 2 thanks for all the help and patience Docholiday77 cheers..have a beer on me or a soft drink..

WelfareBaby said:
..Finally was able to remove asserts and flash cm10.2 up and running really smooth you deserve all credit up until yesterday i never used 7zip or notepad 2 thanks for all the help and patience Docholiday77 cheers..have a beer on me or a soft drink..
Click to expand...
Click to collapse
No problem at all! I'm glad I could help!