Hi,
I have a rooted Sprint GS3, running the stock ROM with just one or two root based apps. Do I need to unroot to accept the OTA update? If so, how do I go about doing that?
TheSapient said:
Hi,
I have a rooted Sprint GS3, running the stock ROM with just one or two root based apps. Do I need to unroot to accept the OTA update? If so, how do I go about doing that?
Click to expand...
Click to collapse
if you would like to run a 4.3 stock ROM, there are a couple in the development section that you can choose from without having to run the 4.3 boot loader that contains KNOX. That way you don't have to go through the unroot process to accept the OTA.
jdelano said:
if you would like to run a 4.3 stock ROM, there are a couple in the development section that you can choose from without having to run the 4.3 boot loader that contains KNOX. That way you don't have to go through the unroot process to accept the OTA.
Click to expand...
Click to collapse
Thanks. I think the preference is to accept the OTA. If we need to unroot, we'll do that if we can figure out how. Sorry for being a little vague. I'm trying to help someone else out.
ok, you can go here Restore to unrooted MD4 follow that and you're good to go
I was stock rooted with clockwork recovery.
Took the OTA without unrooting with no problems at all, just had to re-root when it was done.
dotNETProgrammer said:
I was stock rooted with clockwork recovery.
Took the OTA without unrooting with no problems at all, just had to re-root when it was done.
Click to expand...
Click to collapse
Really? I thought it was always a bad idea with a custom recovery. Maybe we will try it rooted as well. Thanks.
Every other time I've tried it would download, but just wouldn't flash the OTA.
This time, it did. Surprised me.
Re
I got the update notification today when i woke up and when i clicked the restart and install it went to recovery mode, i panicked and clicked reboot (honestly still dont know what to do),
and restarted the phone without updating
I'm running stock 4.1.2 with just 2 root apps (superuser) and tatanium backup, how can i update ?
thanks
mjkubba said:
I got the update notification today when i woke up and when i clicked the restart and install it went to recovery mode, i panicked and clicked reboot (honestly still dont know what to do),
and restarted the phone without updating
I'm running stock 4.1.2 with just 2 root apps (superuser) and tatanium backup, how can i update ?
thanks
Click to expand...
Click to collapse
Relax . You do not have to update. You do not have to lose Root. Check out THIS thread. It will explain a few things to you in detail about Updates, and how to stop the update nag. If you want to update to the latest TW 4.3 Stock Rooted, check out the thread HERE. Just make sure you read, and read again before doing anything. Also make sure to download the correct Rom. There are several versions on the thread.
prboy1969 said:
Relax . You do not have to update. You do not have to lose Root. Check out THIS thread. It will explain a few things to you in detail about Updates, and how to stop the update nag. If you want to update to the latest TW 4.3 Stock Rooted, check out the thread HERE. Just make sure you read, and read again before doing anything. Also make sure to download the correct Rom. There are several versions on the thread.
Click to expand...
Click to collapse
Thanks for the answer.
I actually want to update to stock 4.3, and I was trying to achieve that by getting the OTA update.
And i was wondering if i can still do that?
If I simply can't then I'll just go to CM instead of getting other rooms since I used to have them with my old HTC.
Thanks again
If you want completely Stock Rooted 4.3, it's the second link I posted for you. It's the Stock, Rooted, Factory Rom, with Knox removed. All done by CNexus . Just be sure to read before doing anything. As there are several versions posted. I would highly suggest going this route instead of taking the OTA update. Once you take the OTA you will have Knox, and a different bootloader.
TEAM MiK MikROMs Since 3/13/11
Thanks a lot man, I'm having a problem installing the ROM, I'm getting assert error (status 7) error when trying to install the odexed rom,
I have just updated my CWM to 6.0.4.5
Sorry I cant reply to the thread directly, need 10 posts to be able to do so.
MJ
edit: now it's stuck on boot loop
edit: I downloaded the original recovery rom and installed it from ordin, then updated phone through kies. it's all good now.
Related
Just got my S3. Should I take the initial OTA or will that make it harder for me to root?
I've done my initial homework by searching but I'm still a little unclear. I'm so accustomed to HTC with their OTAs changing Hboot and preventing s-off, etc. I found the guide on how to root but does the bootloader need to be unlocked?
This is my first Samsung device so please be gentle to this noob.
clankfu said:
Just got my S3. Should I take the initial OTA or will that make it harder for me to root?
I've done my initial homework by searching but I'm still a little unclear. I'm so accustomed to HTC with their OTAs changing Hboot and preventing s-off, etc. I found the guide on how to root but does the bootloader need to be unlocked?
This is my first Samsung device so please be gentle to this noob.
Click to expand...
Click to collapse
Your safe to take it, initial root process will be the same regardless. You'll most likely root flashing cwm recovery or a insecure kernel in odin so the system wont matter.only the vzw model has a locked bootloader. doesnt apply to us
If you are at n00b status i personally reccomend mskips toolkit found here:http://forum.xda-developers.com/showthread.php?t=1746680 ---guys a genius, has everything you need.
you can't OTA update a phone that's rooted or has CWM on it, so definitely update before you root.
Exactly, it will download but will fail on the install because CWM is installed. You must have the Samsung stock recovery installed in order to update. Depending on what ROM you are running, you can re-install stock recovery, install OTA update, re-install CWM, then root again. That is what I did, but I am running Rooted Stock.
BrandonEnr7 said:
Exactly, it will download but will fail on the install because CWM is installed. You must have the Samsung stock recovery installed in order to update. Depending on what ROM you are running, you can re-install stock recovery, install OTA update, re-install CWM, then root again. That is what I did, but I am running Rooted Stock.
Click to expand...
Click to collapse
Really the ota's don't matter ne way as the only important parts are the modems which can be dl'd here and applied in cwm anyway
Thanks fellas. My only concern was with the ability to root and staying unlocked after taking an OTA. I'm traumatized by the EVO 3D's OTA that updated the Hboot and was just a pain in the ass.
What's the current OTA address anyway?
BrandonEnr7 said:
Exactly, it will download but will fail on the install because CWM is installed. You must have the Samsung stock recovery installed in order to update. Depending on what ROM you are running, you can re-install stock recovery, install OTA update, re-install CWM, then root again. That is what I did, but I am running Rooted Stock.
Click to expand...
Click to collapse
All this time, whenever an OTA update is available, I have been unrooting my phone, returning back to stock, allowing the OTA update to run, then applying my root back. I have to think there's an easier way than that to allow my phone to update from 4.0.4 to 4.1.2. All I have is root and CWM, is there a stock 4.1.2 file that I am supposed to be flashing instead of my previous painstaking ways?
serstylz2 said:
All this time, whenever an OTA update is available, I have been unrooting my phone, returning back to stock, allowing the OTA update to run, then applying my root back. I have to think there's an easier way than that to allow my phone to update from 4.0.4 to 4.1.2. All I have is root and CWM, is there a stock 4.1.2 file that I am supposed to be flashing instead of my previous painstaking ways?
Click to expand...
Click to collapse
Checkout the android development section. There are Odin and zip flashable stock rooted updates you can use which are ever so much easier than unrooting and rooting again.
tkepk181 said:
Checkout the android development section. There are Odin and zip flashable stock rooted updates you can use which are ever so much easier than unrooting and rooting again.
Click to expand...
Click to collapse
Thanks.. just ran into this thread too http://forum.xda-developers.com/showthread.php?t=1904099
Gonna read around this evening
serstylz2 said:
Thanks.. just ran into this thread too http://forum.xda-developers.com/showthread.php?t=1904099
Gonna read around this evening
Click to expand...
Click to collapse
Just make sure that when you flash the LJ7 zip, you flash the following files IN ADDITION TO THE ROM
1. Team Epic Root from Recovery
2. Custom Recovery - download one of the recoveries found in the OP in billiard's thread. I'm a big fan of TWRP, but to each their own
If you just flash the zip, then all you're going to do is return your phone to stock with the stock recovery image.
Happy flashing!!!!
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
rtatum said:
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
Click to expand...
Click to collapse
I used MrRobinsons' root injected ROM which was UCAMA4 (I think) and left the recovery alone, used the root access app that I bought to keep root. I did not remove any AT&T apps and was able to update to UCAMC3 without any problems. And the app that I bought kept my root access.
CodeNameRedNeck said:
I used MrRobinsons' root injected ROM which was UCAMA4 (I think) and left the recovery alone, used the root access app that I bought to keep root. I did not remove any AT&T apps and was able to update to UCAMC3 without any problems. And the app that I bought kept my root access.
Click to expand...
Click to collapse
Well -ALL- I did was root, install clockwork recovery, and Super SU. So I'm wondering what I need to do to be able to install an OTA update now, because I currently cannot.
It is my understanding that you must leave the recovery stock. I have also read that you must leave the AT&T apps in there but I am not sure about that. So if you want the update go back to stock then update then change your recovery.
CodeNameRedNeck said:
It is my understanding that you must leave the recovery stock. I have also read that you must leave the AT&T apps in there but I am not sure about that. So if you want the update go back to stock then update then change your recovery.
Click to expand...
Click to collapse
Well it's been a while since I've messed with this, so I just need to find instructions on how to return to stock.
Edit: Found a thread to remove root and factory reset, but my OTA update still won't install.
Edit2: Goes to the AT&T Updating progress screen and fails at about 25% and then reboots and starts up as normal.
rtatum said:
So I rooted my Note II but I left the stock ROM on the phone, and AT&T just pushed a big OTA update. What steps do I need to be able to install an OTA update now? After a bit of research, it seems I need to unroot? I've just never had to do this before because I usually just use custom ROMs, but on the Note I wanted to leave the stock ROM in place.
Click to expand...
Click to collapse
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Npsacobra said:
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Click to expand...
Click to collapse
Me too. Whatever it is it isn't a major upgrade. . .
Npsacobra said:
I don't have a solution to your problem, but I am very curious which AT&T update you are referring to.
Click to expand...
Click to collapse
No idea, it's a ~65mb update that just came up yesterday for me. I was looking to reset my phone back to factory anyways lately, so I just decided to do it now on account of there being an update. Since it's not working anyways, I might just re-root and flash a custom ROM, but then I lose S-Pen functionality, but I don't use the pen much these days anyways.
The update has two possibilities...
Either it's the latest UCAMC3 update for UCAMA4.....or...
If updating from the UCAMA4 to C3....and the update has an interrupt...or errors....it "can" complete the update process and show a finished status...but will prompt the user again later and download the update again....minus the updater files placed to cache....because they already exist...
I've had this happen twice in so many months as I returned to stock for various reasons...
The file size is roughly 65 meg.....while the complete update is 68.86 meg..
Just take the update...as it's the UCAMC3 minus the updater...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Same problem here. I just made a thread asking on a fix. So I'll let u know if I get one. And I'll check back here to see if u do
Sent from my Motorola starTAC
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
eletendre84 said:
The 4.3 OTA installed a locked bootloader, which will prevent you from ODIN'ing back to a previous version. you can flash any ROM you would like from recovery, you CANNOT downgrade the bootloader. As of right now, if you have knox, you are stuck with it.
You are extremely lucky that you didn't brick your phone by using odin to flash a non-4.3 tar. I wouldnt try again.
My advice is, remain rooted with a custom recovery, and find a ROM to your liking, and flash that.
I have also heard that we cannot flash custom kernels on the knox (MK3) bootloader as well, but I havent verified that.
Click to expand...
Click to collapse
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
mentorkyrom said:
Thank you for the response. Is CyanogenMod an option then? If I go to CM could I flash back a stock 4.3 rom in the future?
As an added bonus question does CM allow wifi tethering?
Again thank you for the response.
Click to expand...
Click to collapse
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
eletendre84 said:
CM is certainly an option. In fact, its what i am running now. CM11 12-24. Runs great. You can always odin the stock mk3 tar and go back to stock unrooted, at any time.
in order to flash cm11 you MUST be on TWRP 2.6.3.1 or CWM 6.0.4.5 or newer or the assert check will fail.
not sure on the tethering, but im pretty sure it definitely works on cm10.2 and i think it does on 11 as well, but dont quote me on that.
Click to expand...
Click to collapse
Tethering is available on CM11 just like it was on 10.2; would strongly recommend latest Philz Touch Recovery over either TWRP or CWM though. Although it is based on CWM, it has proven to be pretty much the superior recovery option for flashing any Android build number, plus it is highly customizable.
Philz Touch Recovery
this is how to downgrade
mentorkyrom said:
So I'm by no means super knowledgable with this stuff but I've rooted a few phones, played around with CM on my old evo but for the most part I enjoy rooted stock.
I have Galaxy S3 Sprint 4.3 updated OTA from a rooted (4.1.2). When I took the OTA I lost root, no big deal I used Odin and flashed the CF auto root, it said it removed knox and I had root back. Cool!
In short 4.3 sucked, wanted to downgrade back so things like TrevE mod would work again and it wouldn't be so buggy. I tried to use odin to flash "KIES_HOME_L710VPBMD4_L710SPRBMD4_1130792_REV03_user_low_ship.tar.md5" but it gave me the "Use Kies Recovery and error occured" message.
So I then used odin and flashed TWRP and my phone booted.
I'm back on 4.3 rooted.
I've tried picking through the forums and interwebz for answers but I get mixed messages and info on international versions and what not.
I'm tired of trying to figure it out and really could use some help downgrading back to 4.1.2
Thanks,
Brandon
Click to expand...
Click to collapse
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
smuther22 said:
do a factory data reset then use odin auto root from computer ok...... after boot u will get a security message supersu will be unfortunately stopping this is ok..... then u will need to download the supersu.app to root of sd then manually install this will update it and now u can turn off knox and have root... then go to market and download odin mobile then flash your .tar file u want and you will be good to go 4.1.2 doesn't have knox and has a unlocked bootloader so have fun bro this method may work for other phones
Click to expand...
Click to collapse
Do you realize that this thread hasn't been used in a couple of months? I would assume the author has no more need of advice based on the inactivity. Also, once Knox is installed, it is on the phone to stay. PERIOD. NO DOWNGRADING POSSIBLE VIA ODIN. Custom ROMs of any build are fine via custom recovery, but any attempt to change the bootloader will trigger Knox and brick the phone. Dangerous info to be posting here, especially since someone else who doesn't know better might try this.
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Curtai said:
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Click to expand...
Click to collapse
You got some OTA updates to go to get to PJ1 but there's a better way. You could get the PJ1 stock tar from the stock tar thread in general forum and upgrade through Odin again.
OTA is sequential patch updates. Stock tar is full updates. I'd recommend factory reset before flashing the marshmallow update to save time on initial boot optimization.
To answer your question about stopping the updates, turn off auto update feature in Settings when you get to PJ1. Follow the ROM OP to install once you get to PJ1- however you choose.
Note: Since your bootloader is now updated beyond OB7, keep in mind you cannot use Odin to flash full tars OB7 or lower. You cannot downgrade the bootloader but it's still possible to run older ROMs. I only recommend full stock tars no older than OG5.
Sent from my SM-N920P using Tapatalk
samep said:
You got some OTA updates to go to get to PJ1 but there's a better way. You could get the PJ1 stock tar from the stock tar thread in general forum and upgrade through Odin again.
OTA is sequential patch updates. Stock tar is full updates. I'd recommend factory reset before flashing the marshmallow update to save time on initial boot optimization.
To answer your question about stopping the updates, turn off auto update feature in Settings when you get to PJ1. Follow the ROM OP to install once you get to PJ1- however you choose.
Note: Since your bootloader is now updated beyond OB7, keep in mind you cannot use Odin to flash full tars OB7 or lower. You cannot downgrade the bootloader but it's still possible to run older ROMs. I only recommend full stock tars no older than OG5.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
So, now I am on PJ1 and I don't know how to put TWRP on my phone, I want to put tx_dbs_tx's UN7 hybrid on my phone and I am having issues both finding and putting TWRP on my phone... and I can't find a download or anything for it...
I've downloaded 2 different versions of twrp and used odin to put them on but I think I am doing something wrong because it isn't booting into twrp
Curtai said:
I was rooted on OB7 with chainfire and the stock recovery image or whatever, it's been several years, well I used superSU and unrooted the phone and it still wouldn't let me do OTA. So tonight I downloaded the OF5 Rom and updated through Odin, Now it's telling me my device status is official and it's currently downloading the next update... The issue I am wondering about now is... Since it will OTA, I want to put UN7 on my phone and I don't want to update past PJ1, will it let me stop the updates?
Click to expand...
Click to collapse
and of course I was missing a step... nobody said uncheck auto reboot and it kept keeping the bootloader locked
got it done now and I managed to get the custom rom installed... or at least I think it's working
Curtai said:
and of course I was missing a step... nobody said uncheck auto reboot and it kept keeping the bootloader locked
got it done now and I managed to get the custom rom installed... or at least I think it's working
Click to expand...
Click to collapse
Oh your talking about installing twrp? Yeah you have to not let it reboot. And when is done pull battery and boot into recovery to get it to stick. Obviously you figured it out. But just saying. I think earlier versions you didn't need to do that but now you do.
Glad you got it going. How you like the Rom? Running smooth for me.
ROM is good
Well I obviously got it going and didn't read the first couple posts after the install and didn't notice the SMS issue so I had that problem and I can't find a lot of the menu options that I had with the OB7 original I've been running for about 18 months... It's pretty smooth now and I'm wondering how fast it will fill up my internal memory I like that it's almost 20 gigs free.. for a while I was running on less than 6 I need to find an efficient way to use my external SD card... Other than that the options are neat but it seems really bloated all the extra Google apps make me sick even though I never use them... I've got titanium backup and am freezing them and will probably uninstall them soon... I want a small ROM that I can customize myself or apps that are easily removed or whatever half the apps I don't want are in ROM which is a pain to remove or I just don't know how to unless I use TB
Wow that's a novel sorry but yeah that's my ramblings for the next week I guess... Now I'm gonna hit the rack...