hey i'm an owner of the GN 2 GN7100 the phone is working perfectly under 4.1.2, i rooted it with Odin (so the download mode is Odin version) and after i heard that the official 4.3 is rolling out from samsung i've done a a full factory reset to unroot it and there is no problem at all , but now the 4.3 european version is released , when i check for updates the phone askes me to dowload it , i download it normally but when the phone reboot and it starts to flash or extracting the new update it displays an error at 30% ,and the phone reboot to it normal state the 4.1.2 so now guy where is the problem ?? , sorry for the long post just wanted it to be detailed
djazeiry said:
hey i'm an owner of the GN 2 GN7100 the phone is working perfectly under 4.1.2, i rooted it with Odin (so the download mode is Odin version) and after i heard that the official 4.3 is rolling out from samsung i've done a a full factory reset to unroot it and there is no problem at all , but now the 4.3 european version is released , when i check for updates the phone askes me to dowload it , i download it normally but when the phone reboot and it starts to flash or extracting the new update it displays an error at 30% ,and the phone reboot to it normal state the 4.1.2 so now guy where is the problem ?? , sorry for the long post just wanted it to be detailed
Click to expand...
Click to collapse
Your best bet woukd probably be to download your update from sammobile.com and install it as per their instruction. Look into the repartition ing option.
tonylee000 said:
Your best bet woukd probably be to download your update from sammobile.com and install it as per their instruction. Look into the repartition ing option.
Click to expand...
Click to collapse
thaks , so" the repatitiong options " you said is it wipe partition ?? for sammobil i'll see later
djazeiry said:
thaks , so" the repatitiong options " you said is it wipe partition ?? for sammobil i'll see later
Click to expand...
Click to collapse
I said "look in to it", what I mean is that sam mobile say that if your upgrading stock make sure you DO tick the box but all the guides on here say avoid and DONT tick the box. Ive just flashed a rom with odin and did NOT tick the box but it was a dmg rom. I would not have thought the 4.3 roms need to alter any partition sizes so try it without repartitioning and if it has issues maybe try it with a repartition.
tonylee000 said:
I said "look in to it", what I mean is that sam mobile say that if your upgrading stock make sure you DO tick the box but all the guides on here say avoid and DONT tick the box. Ive just flashed a rom with odin and did NOT tick the box but it was a dmg rom. I would not have thought the 4.3 roms need to alter any partition sizes so try it without repartitioning and if it has issues maybe try it with a repartition.
Click to expand...
Click to collapse
thanks a lot dude , ok i will avoid to wipe patition , i will try to update with kies , i've tried for the third time always the same when it goes to 30% same error and the phone reboot again
djazeiry said:
thanks a lot dude , ok i will avoid to wipe patition , i will try to update with kies , i've tried for the third time always the same when it goes to 30% same error and the phone reboot again
Click to expand...
Click to collapse
Are you running stock? A custom rom? Jave you flashed a stock image? If you have flashed a stock image and its not tje correct one then this could be why it wont update. Try flashing a stock 412 image from the carrier that provided the phone or just go straiight for the 4.3 image, getting stock 4.3 installed on your phone will activate the efuse with knox and you wont be able to downgrade after
tonylee000 said:
Are you running stock? A custom rom? Jave you flashed a stock image? If you have flashed a stock image and its not tje correct one then this could be why it wont update. Try flashing a stock 412 image from the carrier that provided the phone or just go straiight for the 4.3 image, getting stock 4.3 installed on your phone will activate the efuse with knox and you wont be able to downgrade after
Click to expand...
Click to collapse
Tony i'm always under 4.1.2 the only thing i've done is rooting the phone via Odin that's all , even with kies there is an issue when downloading the update
if you have problem with kies,why dont you try flash with odin ?
djazeiry said:
Tony i'm always under 4.1.2 the only thing i've done is rooting the phone via Odin that's all , even with kies there is an issue when downloading the update
Click to expand...
Click to collapse
If its all the same as when you got it, then there shouldnt be any issues. If its under warranty id ask you carrier about a solution, if not id go sammobile.com and use them with odin.
sora9009 said:
if you have problem with kies,why dont you try flash with odin ?
Click to expand...
Click to collapse
yeah i'm thinking about it , or i will try a know free rom that's all
tonylee000 said:
If its all the same as when you got it, then there shouldnt be any issues. If its under warranty id ask you carrier about a solution, if not id go sammobile.com and use them with odin.
Click to expand...
Click to collapse
before i rooted it it was updating from OTA normally , but anyway i'll try some roms with know free, and thanks a lot for your help dude
tonylee000 said:
If its all the same as when you got it, then there shouldnt be any issues. If its under warranty id ask you carrier about a solution, if not id go sammobile.com and use them with odin.
Click to expand...
Click to collapse
tony i found that my custom download counter is set to one is that normal after rooting it with ODIN ?? maybe i need to set it to 0 with the triangle away app ?
djazeiry said:
tony i found that my custom download counter is set to one is that normal after rooting it with ODIN ?? maybe i need to set it to 0 with the triangle away app ?
Click to expand...
Click to collapse
My counter was set to 2 so I triangled away and turned off then flashed stock rom (pre rooted) and the counter was set to 1 but other bits had changed to official. I triangled away again with the new stock rom and recovery and triangle away worked this time, rebooting the phone which it didnt do before (I think) and when it rebooted it loaded a new screen id not seen before (in other words this time it was working properly - cant work correctly on custom roms I guess) after this time it reset everything properly. The option it gave me after it had reset the counters properly it gave me 2 options, 1 reboot, or 2 reboot into download mode which I chose no2. In download mode there were no counters or text or anything but after another reboot and then back into download mode the markers and counter were there all reset hope thats not too unclear :/
Oh dunno if rooting would cause that issue or not but maybe try unrooting before ota. The ota on my stock rom just searches and doesnt do anything. Upgrading to official 4.3 though I cannit recommend, I was going to upgrade to official 4.3 but I am not now, you cannot downgrade and my friend has a s4 and has upgraded his to official 4.3 mk9 (hes never rooted or anything that may tamoer with warranty) and hes quite annoyed with it, prooer laggy etc he wishes he hadnt bothered. I am hoping for arhd 20 to materialize but im noth bothering with the undowngradeable official now
---------- Post added at 11:02 PM ---------- Previous post was at 10:52 PM ----------
Do you have stock recovery? If you have custom recovery that will cause the counter to hit 1
---------- Post added at 11:07 PM ---------- Previous post was at 11:02 PM ----------
http://forum.xda-developers.com/showthread.php?t=2230250
This is the thread I used. I chose the dmg1 from july 13th, I couldn't install an earlier one without messing with the bootloader because ive already upgraded to dmg. i believe I chose the deodexed option
Tbh mate, ive ran 4.3 for a bit and apart from a few small cosmetic changes theres nothing there thats going to improve your phone so unless your buying a Galaxy Gear theres no real point to it imo. Kitkat wont be long, ill give that a go when it turns up
Oh yeah and triangle away is riskey - you could brick your phone so unless your actually sending it back, I wouldn't bother about the counter numbers
tonylee000 said:
My counter was set to 2 so I triangled away and turned off then flashed stock rom (pre rooted) and the counter was set to 1 but other bits had changed to official. I triangled away again with the new stock rom and recovery and triangle away worked this time, rebooting the phone which it didnt do before (I think) and when it rebooted it loaded a new screen id not seen before (in other words this time it was working properly - cant work correctly on custom roms I guess) after this time it reset everything properly. The option it gave me after it had reset the counters properly it gave me 2 options, 1 reboot, or 2 reboot into download mode which I chose no2. In download mode there were no counters or text or anything but after another reboot and then back into download mode the markers and counter were there all reset hope thats not too unclear :/
Oh dunno if rooting would cause that issue or not but maybe try unrooting before ota. The ota on my stock rom just searches and doesnt do anything. Upgrading to official 4.3 though I cannit recommend, I was going to upgrade to official 4.3 but I am not now, you cannot downgrade and my friend has a s4 and has upgraded his to official 4.3 mk9 (hes never rooted or anything that may tamoer with warranty) and hes quite annoyed with it, prooer laggy etc he wishes he hadnt bothered. I am hoping for arhd 20 to materialize but im noth bothering with the undowngradeable official now
---------- Post added at 11:02 PM ---------- Previous post was at 10:52 PM ----------
Do you have stock recovery? If you have custom recovery that will cause the counter to hit 1
---------- Post added at 11:07 PM ---------- Previous post was at 11:02 PM ----------
http://forum.xda-developers.com/showthread.php?t=2230250
This is the thread I used. I chose the dmg1 from july 13th, I couldn't install an earlier one without messing with the bootloader because ive already upgraded to dmg. i believe I chose the deodexed option
Tbh mate, ive ran 4.3 for a bit and apart from a few small cosmetic changes theres nothing there thats going to improve your phone so unless your buying a Galaxy Gear theres no real point to it imo. Kitkat wont be long, ill give that a go when it turns up
Oh yeah and triangle away is riskey - you could brick your phone so unless your actually sending it back, I wouldn't bother about the counter numbers
Click to expand...
Click to collapse
TONYYYYY !!!!! finally it works the update via KIES worked flawlessly ,no battery drain no lags as they said because i'm just using it for development , the phone now is updated to 4.3 and thanks a lot and a lot again for your answers
djazeiry said:
TONYYYYY !!!!! finally it works the update via KIES worked flawlessly ,no battery drain no lags as they said because i'm just using it for development , the phone now is updated to 4.3 and thanks a lot and a lot again for your answers
Click to expand...
Click to collapse
No problem, what did you change to make it work?
tonylee000 said:
No problem, what did you change to make it work?
Click to expand...
Click to collapse
i've done nothign just kept kies doing it job , there is anyway to remove KNOX ?
djazeiry said:
i've done nothign just kept kies doing it job , there is anyway to remove KNOX ?
Click to expand...
Click to collapse
You may need a knox free kernal, not sure. You can use Dr Ketans multitool v6 to root and remove knox if you have a custom recovery, or you can install the Xposed Installer (apk file) http://repo.xposed.info/module/de.robv.android.xposed.installer and then install 'wanam xposed' from the module list. Click to remove knox in the security section of wanam module but i fear that option is just a cosmetic one. If you decide to use a custom recovery, use philz recovery (flash the tar file from odin using the pda tab) but dont flash v6 (has issues), use v5.15
tonylee000 said:
You may need a knox free kernal, not sure. You can use Dr Ketans multitool v6 to root and remove knox if you have a custom recovery, or you can install the Xposed Installer (apk file) http://repo.xposed.info/module/de.robv.android.xposed.installer and then install 'wanam xposed' from the module list. Click to remove knox in the security section of wanam module but i fear that option is just a cosmetic one. If you decide to use a custom recovery, use philz recovery (flash the tar file from odin using the pda tab) but dont flash v6 (has issues), use v5.15
Click to expand...
Click to collapse
ok thanks tony, and everything in on stock version in my phone
Related
Sorry if this has been asked but i read several threads and still cant get a clear answer.....plus im a noob to androids.
Well i got my note 2 a few days ago and as soon as i got it i rooted it with galaxy note2 tool kit. and i been ok with it... but last night i got a popup saying there is a att software update for my phone.... i downloaded it from the phone and all went well, then it says press here to update software....did that and i get twerp or something that comes up that shows mount wipe install and all different kind of options that i know its a program i downloaded when i rooted, but what do i do on this screen??
by the way i am on android version 4.1.1
ndesent said:
Sorry if this has been asked but i read several threads and still cant get a clear answer.....plus im a noob to androids.
Well i got my note 2 a few days ago and as soon as i got it i rooted it with galaxy note2 tool kit. and i been ok with it... but last night i got a popup saying there is a att software update for my phone.... i downloaded it from the phone and all went well, then it says press here to update software....did that and i get twerp or something that comes up that shows mount wipe install and all different kind of options that i know its a program i downloaded when i rooted, but what do i do on this screen??
by the way i am on android version 4.1.1
Click to expand...
Click to collapse
you need to get stock recovery to flash OTA updates.
ndesent said:
Sorry if this has been asked but i read several threads and still cant get a clear answer.....plus im a noob to androids.
Well i got my note 2 a few days ago and as soon as i got it i rooted it with galaxy note2 tool kit. and i been ok with it... but last night i got a popup saying there is a att software update for my phone.... i downloaded it from the phone and all went well, then it says press here to update software....did that and i get twerp or something that comes up that shows mount wipe install and all different kind of options that i know its a program i downloaded when i rooted, but what do i do on this screen??
by the way i am on android version 4.1.1
Click to expand...
Click to collapse
just install TriangleAway and follow the instructions
yea u nee to use triangle away to trick ur system so it can recieve update via OTA
steps???
i downloaded triangle away app and ran the app to reset binary to zero, but i still get same result when i download system update on phone.....can some help a noob with a step by step
Why don't you flash updates through odin?
Reset the flash counter to zero.
Download the latest official stock rom and flash via odin.
Voila flash counter reset to zero, system status back to normal and latest out of the box stock rom
Sent from my GT-N7100 using Tapatalk 2
sorry to sound dumb....but
indigotheory said:
Reset the flash counter to zero.
Download the latest official stock rom and flash via odin.
Voila flash counter reset to zero, system status back to normal and latest out of the box stock rom
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
do i download the stock rom to the pc or the phone ota???
ndesent said:
do i download the stock rom to the pc or the phone ota???
Click to expand...
Click to collapse
Download to pc via pc odin
---------- Post added at 12:47 PM ---------- Previous post was at 12:38 PM ----------
wipe data and factory reset in stock recovery if your device status still 'modified'
ndesent said:
do i download the stock rom to the pc or the phone ota???
Click to expand...
Click to collapse
You can only get the samsung/Kies update if you have the stock rom and erhaps even set the system status to normal using triangle away. You must use Odin and flash the stock rom through your pc.
Sent from the Rabbit Hole
thanks guys
I found this http://www.techethon.com/update-att-galaxy-note-2-to-android-4-1-2-jelly-bean/ imma try it in a minute
Hey guys, how are you?
Sorry my bad english! But I need your help ...
I recently installed the Rom LiquidSmooth 4.2.2 Android 4.2.2 to test itself, not LiquidSmooth, found it very nice and everything. But back to the factory settings with the stock ROM 4.0.4 and I upgrade by Kies and pff, my phone can not do updates by Kies. Samsung tried my country (Brazil) but they can not support (or paying for and also not aware of devices outside) for my I747 ... I did the emergency recovery firmware and now it's on 4.1.1 but it still remains unrecognized by Kies (NOTE: It is recognized rather as SGH-I747, however, can not do updates or anything, just back of the device; NOTE 2: I bought it at AT & T in the United States and I can not take you there to support). The mesangem is: "Your device does not support firmware upgrade via kies".
After getting well pissed off with this bull****, or my **** (haha) decided to find out what was wrong and found that some of the things LiquidSmooth is still in the system, such as ringtones, facebook layout and stuff ... (Print the end of the topic) .
So I come here asking for help to you, to completely reset it and go back to having all functions and patterns of manufactures, so that in future I can sell it or give it to my mom and she does not get lost as I am today ...
Is there any way I can do this completely and return it to factory defaults?
attempts:
- I went back to stock rom several times and still the same thing;
- I tried the firmware recovery Kies and nothing;
- I tried several tutorials on the internet and nothing.
Can anyone help me?
I literally am going crazy because of it ...
Diego.
DiegoEvangelista said:
Hey guys, how are you?
Sorry my bad english! But I need your help ...
I recently installed the Rom LiquidSmooth 4.2.2 Android 4.2.2 to test itself, not LiquidSmooth, found it very nice and everything. But back to the factory settings with the stock ROM 4.0.4 and I upgrade by Kies and pff, my phone can not do updates by Kies. Samsung tried my country (Brazil) but they can not support (or paying for and also not aware of devices outside) for my I747 ... I did the emergency recovery firmware and now it's on 4.1.1 but it still remains unrecognized by Kies (NOTE: It is recognized rather as SGH-I747, however, can not do updates or anything, just back of the device; NOTE 2: I bought it at AT & T in the United States and I can not take you there to support). The mesangem is: "Your device does not support firmware upgrade via kies".
After getting well pissed off with this bull****, or my **** (haha) decided to find out what was wrong and found that some of the things LiquidSmooth is still in the system, such as ringtones, facebook layout and stuff ... (Print the end of the topic) .
So I come here asking for help to you, to completely reset it and go back to having all functions and patterns of manufactures, so that in future I can sell it or give it to my mom and she does not get lost as I am today ...
Is there any way I can do this completely and return it to factory defaults?
attempts:
- I went back to stock rom several times and still the same thing;
- I tried the firmware recovery Kies and nothing;
- I tried several tutorials on the internet and nothing.
Can anyone help me?
I literally am going crazy because of it ...
Diego.
Click to expand...
Click to collapse
How did you go back to stock? You'll get errors from kies and ota updates by remaining rooted.
By the sounds of it it just needs a proper wipe the unroot.
This video will get you back to 100% stock unrooted.
https://www.youtube.com/watch?v=WzydHUG7XZE&feature=youtube_gdata_player
Also check out this link. The second post has a paragraph on unrooting to go with the video. It also contains the proper links for all the files you'll need to do it.
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
How did you go back to stock? You'll get errors from kies and ota updates by remaining rooted.
By the sounds of it it just needs a proper wipe the unroot.
This video will get you back to 100% stock unrooted.
https://www.youtube.com/watch?v=WzydHUG7XZE&feature=youtube_gdata_player
Also check out this link. The second post has a paragraph on unrooting to go with the video. It also contains the proper links for all the files you'll need to do it.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
best unroot video ever.
OP, to accompany the video guide, you'll need:
- Triangle Away installed
- The official stock firmware for your device
- Odin installed on your PC
- Your Samsung USB cable, if possible
- Samsung drivers installed on PC
xBeerdroiDx said:
best unroot video ever.
OP, to accompany the video guide, you'll need:
- Triangle Away installed
- The official stock firmware for your device
- Odin installed on your PC
- Your Samsung USB cable, if possible
- Samsung drivers installed on PC
Click to expand...
Click to collapse
An shoot thanks. Forgot to link the thread. Was half asleep.
Sent from my SGH-I747 using xda app-developers app
Thanks for everything so far guys, but without success ... Still the same thing.
All I have to follow these steps before and still have the same problem.
Anything else? :/
I'll try again, maybe...
Thx a lot.
-----
TraingleAway not reset my phone and boot him, his reset counter and no more... is this the problem wrong?
DiegoEvangelista said:
Thanks for everything so far guys, but without success ... Still the same thing.
All I have to follow these steps before and still have the same problem.
Anything else? :/
I'll try again, maybe...
Thx a lot.
-----
TraingleAway not reset my phone and boot him, his reset counter and no more... is this the problem wrong?
Click to expand...
Click to collapse
Did you unroot?
You need to do that before anything else
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Did you unroot?
You need to do that before anything else
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah, but my TriangleAway is a v2.99 and not reset my device after reset the flash counter...
I reset manual.
Obs: this screen is not active...
Diego.
I tried the tip of the video, however, was the same thing ...
I'm looking for a fix to kies, but I do not think any status or anything ...
DiegoEvangelista said:
I tried the tip of the video, however, was the same thing ...
I'm looking for a fix to kies, but I do not think any status or anything ...
Click to expand...
Click to collapse
So when I went back to stock:
1. I just flashed a rooted stock firmware in odin
http://forum.xda-developers.com/showthread.php?t=1739426
(just so I was back on a 4.1.1 stock rom. I didn't want to odin from a custom rom)
2. Then used triangle away
3. Then flashed the stock unrooted 4.0.4 from here in odin
http://www.sammobile.com/firmwares/
(This gets rid of custom recovery)
4. Booted in stock recovery and then did a factory reset because you sometimes get a simple bootloop
5. Rebooted and I was back to stock.
I've noticed sometimes you have to switch the order around some to get it unrooted and the flash counter reset. Triablge away is for right before you unroot. You have to flash a stock .tar rom in odin to get rid of the custom recovery as well. It replaces the system, kernel, and the recovery.
hednik said:
So when I went back to stock:
1. I just flashed a rooted stock firmware in odin
http://forum.xda-developers.com/showthread.php?t=1739426
(just so I was back on a 4.1.1 stock rom. I didn't want to odin from a custom rom)
2. Then used triangle away
3. Then flashed the stock unrooted 4.0.4 from here in odin
http://www.sammobile.com/firmwares/
(This gets rid of custom recovery)
4. Booted in stock recovery and then did a factory reset because you sometimes get a simple bootloop
5. Rebooted and I was back to stock.
I've noticed sometimes you have to switch the order around some to get it unrooted and the flash counter reset. Triablge away is for right before you unroot. You have to flash a stock .tar rom in odin to get rid of the custom recovery as well. It replaces the system, kernel, and the recovery.
Click to expand...
Click to collapse
Thank you bro, but my problem is Kies. I can't upgrade for him.
He did not let me update or related ...
I've done everything, often ...
- Unroot flash rom;
- Factory reset in recovery and in phone;
- All things.
I do not know what else to do.
I can do the emergency recovery firmware but it keeps saying that my device does not support updates via kies.
DiegoEvangelista said:
Thank you bro, but my problem is Kies. I can't upgrade for him.
He did not let me update or related ...
I've done everything, often ...
- Unroot flash rom;
- Factory reset in recovery and in phone;
- All things.
I do not know what else to do.
I can do the emergency recovery firmware but it keeps saying that my device does not support updates via kies.
Click to expand...
Click to collapse
Are you sure you did the steps in the right order ? Kies won't do that unless you are still rooted or have a custom recovery. I
Kies has no use here to be honest but I know some people like to use it to upgrade from time to time or transfer data.
What exactly is the emergency recovery firmware ? (Your name for it might be different than mine)
hednik said:
Are you sure you did the steps in the right order ? Kies won't do that unless you are still rooted or have a custom recovery. I
Kies has no use here to be honest but I know some people like to use it to upgrade from time to time or transfer data.
What exactly is the emergency recovery firmware ? (Your name for it might be different than mine)
Click to expand...
Click to collapse
Y, bro. I followed all the steps... All right!
--
Recovery Emergency Firmware in Kies:
-> Tools
-> Firmware upgrade and initialization
-> Model
-> Serial Number
-> Download Mode in s3.
I tried all tutorials, but, not successful
More sugestions?
Diego.
Any other tips to reset the device completely and again be recognized by Kies?
:/
After my upgrade to official 4.3 update mk4 i root my phone and now is stuck only in this firmware. Please can anyone here help me to downgrade this one firmware and go again ack in release mj5????Please let me know how can i do that.When i tried to to this, odin stop work. An really sorry for my english.
tzelves said:
After my upgrade to official 4.3 update mk4 i root my phone and now is stuck only in this firmware. Please can anyone here help me to downgrade this one firmware and go again ack in release mj5????Please let me know how can i do that.When i tried to to this, odin stop work. An really sorry for my english.
Click to expand...
Click to collapse
Dis yu made a nandroid backup?, or an OFS backup?, couse the probems is the knox app and if yu¿ou have your backup you always can do a restore, the problem is the bootloader. or you can reflash the mk4 rom.
Jrincon_v said:
Dis yu made a nandroid backup?, or an OFS backup?, couse the probems is the knox app and if yu¿ou have your backup you always can do a restore, the problem is the bootloader. or you can reflash the mk4 rom.
Click to expand...
Click to collapse
i did not make a back up because i did not know that after update i would have problem with downgrade.this was a big mistake probably from me. after update i rooted my phone and now i can not downgrade to any other firmware except mk4. i just want to go back to mj5 or mi6 or anything else. i think dr ketan told something like this but only for mj5. have you got any other idea for mk4 my friend???because im ready to throw my phone from window....
~.~
tzelves said:
After my upgrade to official 4.3 update mk4 i root my phone and now is stuck only in this firmware. Please can anyone here help me to downgrade this one firmware and go again ack in release mj5????Please let me know how can i do that.When i tried to to this, odin stop work. An really sorry for my english.
Click to expand...
Click to collapse
just flash the bootloader of mj5 to ur phone in download mode via odin that wud help
here is the link to bootloader
http://forum.xda-developers.com/attachment.php?attachmentid=2387666&d=1384258512
myk1709 said:
just flash the bootloader of mj5 to ur phone in download mode via odin that wud help
here is the link to bootloader
http://forum.xda-developers.com/attachment.php?attachmentid=2387666&d=1384258512
Click to expand...
Click to collapse
i ve tried this and even now dont work..it seems like knox dont let me do nothing.i think that first i have to put away the knox security which it shows 1. how can i do this? i know that i was made a big mistake to let my phone take the official update but now i have to make it all like before. i ve changed about 100 custom roms and this isi the first time that i stuck in this stupid knox security. and again sorry for my english.
tzelves said:
i ve tried this and even now dont work..it seems like knox dont let me do nothing.i think that first i have to put away the knox security which it shows 1. how can i do this? i know that i was made a big mistake to let my phone take the official update but now i have to make it all like before. i ve changed about 100 custom roms and this isi the first time that i stuck in this stupid knox security. and again sorry for my english.
Click to expand...
Click to collapse
ok go to sammobile.com get the firmware for ur phone and u can downgrade to that by flashing it with odin i suggest go to 4.1.2 n then try a custom rom
myk1709 said:
ok go to sammobile.com get the firmware for ur phone and u can downgrade to that by flashing it with odin i suggest go to 4.1.2 n then try a custom rom
Click to expand...
Click to collapse
if you do that, won't you be stuck at the 4.1.2 for the rest of your phone life ?
Sent from the corner of this rounded earth.
myk1709 said:
ok go to sammobile.com get the firmware for ur phone and u can downgrade to that by flashing it with odin i suggest go to 4.1.2 n then try a custom rom
Click to expand...
Click to collapse
I did this twice but still nothing. I guess that have to wait for someone of developers to find a way to throw knox warranty away to do after this whatever i want again. Thanks for your trying to help me my friend. But i still want to throw my phone from window
tzelves said:
I did this twice but still nothing. I guess that have to wait for someone of developers to find a way to throw knox warranty away to do after this whatever i want again. Thanks for your trying to help me my friend. But i still want to throw my phone from window
Click to expand...
Click to collapse
Do you have in download mode warranty void line and if so is it 0 or 1?
I think if you have warranty void line in download mode and it is 0/0 you should wait for a work arround or else you'll loose your warranty even if you flash an official rom (4.1.2 foe exemple) with odin because it will trigger your knox warranty counter!
Don't throw it out the window...it's a good phone
As i know if you flash to a stock rom early to the last version you can lost your IMEI and the problem here is precicely the bootloader and NFS directory, allways is necesary made a nandroid backup, As i read the only option is flash the Stock rom and then try recover the phone and still in MK4 rom, Sorry i don´t see anoter option.
mk4 update.
Hi. Hey i flash the mk4 from sammobile and works perfect, but i find that wifi gets a little weak and some time you trhing to do something and a shild appears that says that weathever got block for the pho es safety. Now, all this is because the knox thing i belive, so wath i did is: i went to root explorer app , system, app, make your on root explorer you change it to "o/r" because you need to delete some stuff, look for every thing that says knox on it , long press to wen you see the menu pop up and hit delete. Delete all those that says knox and you will be fine. I just did. Good lock..
mk4 update.
Hi.i need a little help here. I got the mk4 from sammobile and rooted with stock recovery. Everything looks good but the air command is not working. Pen works fine like allways but the air update that should come with 4.3 is not working. There is a y mod for this that i can flash? Thanks. Also i delete everything that said knox, now my wifi works percect. Thanks
hi .,,. !!
i am new to rooting
recently i rooted my note 2 ., but as official update has been released , now i want to update my phone to official jb 4.3 but i cant as it says that my device is modified,.,.
please help me i getting jb 4.3 update,,. my binary count is 5
can anyone telll proper unroot guide and getting warranty back ,.., both ,.,. i have researched a bit and found that tingle away is highly risky
i dont want to loose my phone,.,.
i am extremely scared,.,.
please help !!!
why the hell you root at first if you scared to take the risk.
since you already root, just instal triangle away..and reset the counter..then flash stock rom..thats all
there so many guide out there..just search for it.
btw, flashing with odin is more risky than reset the counter with triangle away.
sora9009 said:
why the hell you root at first if you scared to take the risk.
since you already root, just instal triangle away..and reset the counter..then flash stock rom..thats all
there so many guide out there..just search for it.
btw, flashing with odin is more risky than reset the counter with triangle away.
Click to expand...
Click to collapse
oh man .,,.,. why are you scaring me..,.,,. and i am scared because this is may first expensive phone,.,. i don't want to loose it.
btw thnks for reply ... and please answer one more question ,..,
i know that triangle away works on rooted phone and resets counter but if i reset my counter to 0 and then flash stock rom, would'nt it sets my counter to 1 as i have flashed my phone ?? and then i have to root my phone again .,.,n triangle stuff again and again ???
i am confused.,,.
vari217 said:
oh man .,,.,. why are you scaring me..,.,,. and i am scared because this is may first expensive phone,.,. i don't want to loose it.
btw thnks for reply ... and please answer one more question ,..,
i know that triangle away works on rooted phone and resets counter but if i reset my counter to 0 and then flash stock rom, would'nt it sets my counter to 1 as i have flashed my phone ?? and then i have to root my phone again .,.,n triangle stuff again and again ???
i am confused.,,.
Click to expand...
Click to collapse
do not worry mate..flashing official rom will not raise the counter
sora9009 said:
do not worry mate..flashing official rom will not raise the counter
Click to expand...
Click to collapse
thnx for your super fast reply friend.,., !!
one more thing i have Philz recovery will it be a problem ??
and if i have change it to stock recovery ,,., than when ?? i mean before triangle way or after trangle away but before flashin stock rom ?
vari217 said:
thnx for your super fast reply friend.,., !!
one more thing i have Philz recovery will it be a problem ??
and if i have change it to stock recovery ,,., than when ?? i mean before triangle way or after trangle away but before flashin stock rom ?
Click to expand...
Click to collapse
1st use the triangle away..after done reset, triangle away will give you option to reboot or go to download mode.You click go to download mode and then flash stock rom.
If you choose reboot,the counter will raise again.
sora9009 said:
1st use the triangle away..after done reset, triangle away will give you option to reboot or go to download mode.You click go to download mode and then flash stock rom.
If you choose reboot,the counter will raise again.
Click to expand...
Click to collapse
and what about Philz recovery ??? how to go back to stock recovery ,..,
as i have read that if you have custome recovery than your binery count will remain 1 and not come to 0 !!
ouhh forgot to tell you if you have custom kernel like perseus installed, you can reset directly in the application itself.
if not,the application will take you to triangle away special mode..something like that..then you can reset it there
---------- Post added at 02:15 PM ---------- Previous post was at 02:14 PM ----------
vari217 said:
and what about Philz recovery ??? how to go back to stock recovery ,..,
as i have read that if you have custome recovery than your binery count will remain 1 and not come to 0 !!
Click to expand...
Click to collapse
when you flash stock rom, your custom recovery will be overwrite with the stock recovery..thats why i recommend you to flash stock rom.
sora9009 said:
ouhh forgot to tell you if you have custom kernel like perseus installed, you can reset directly in the application itself.
if not,the application will take you to triangle away special mode..something like that..then you can reset it there
---------- Post added at 02:15 PM ---------- Previous post was at 02:14 PM ----------
when you flash stock rom, your custom recovery will be overwrite with the stock recovery..thats why i recommend you to flash stock rom.
Click to expand...
Click to collapse
ohh k
now i got it ,.,. i just give it a shot .,, and let you know
thanks for giving your valuable time !! thanks once again ,..,
vari217 said:
ohh k
now i got it ,.,. i just give it a shot .,, and let you know
thanks for giving your valuable time !! thanks once again ,..,
Click to expand...
Click to collapse
you are welcome and good luck friend.
sora9009 said:
you are welcome and good luck friend.
Click to expand...
Click to collapse
i have un rooted my device and updated to jb 4.3.,,,. but now the main problem is that ,.,. it dosent have air command for which i was updating !!.,.,.
is there any odexed rom which have air command and other note 3 features ??
vari217 said:
i have un rooted my device and updated to jb 4.3.,,,. but now the main problem is that ,.,. it dosent have air command for which i was updating !!.,.,.
is there any odexed rom which have air command and other note 3 features ??
Click to expand...
Click to collapse
no
and since you already flash official 4.3..u can't either downgrade to 4.1.2 or flashing any custom rom,kernel and recovery without triggered the knox..
if you said you wanna note 3 features before, i will recommend you DN3 rom..thats why make a research 1st mate,,do not blindly flashing.
sora9009 said:
no
and since you already flash official 4.3..u can't either downgrade to 4.1.2 or flashing any custom rom,kernel and recovery without triggered the knox..
if you said you wanna note 3 features before, i will recommend you DN3 rom..thats why make a research 1st mate,,do not blindly flashing.
Click to expand...
Click to collapse
ohh man....
so now I cant have note 3 features...ummmmm:
And what do you mean by trigring knox... I thought the official 4.3 is having note 3 features...
read it here
http://omegadroid.co/wanted-knox-void-warranty-0x1/
if samsung put note 3 features in note 2, who gonna buy note 3..since note 2 more cheaper now.
sora9009 said:
read it here
http://omegadroid.co/wanted-knox-void-warranty-0x1/
if samsung put note 3 features in note 2, who gonna buy note 3..since note 2 more cheaper now.
Click to expand...
Click to collapse
By raeding the provided link.. I concluded that if I try to install custome recovery or firmware then my warrenty will go for eber... right...?? But this mean I can install custom roms... right??
vari217 said:
By raeding the provided link.. I concluded that if I try to install custome recovery or firmware then my warrenty will go for eber... right...?? But this mean I can install custom roms... right??
Click to expand...
Click to collapse
Yes u can man if warranty is not an issue for you
but before flashing rom read carefully every instruction on the page
http://forum.xda-developers.com/showthread.php?t=2504016
this is dn3 rom i have installed it very good one
vari217 said:
By raeding the provided link.. I concluded that if I try to install custome recovery or firmware then my warrenty will go for eber... right...?? But this mean I can install custom roms... right??
Click to expand...
Click to collapse
of course you can install custom rom..
its your phone, all the risk is responsible by you anyway.
I also want to return to stock after custom ROM too. I am a little scared of using Triangle away. Seems very complicated and I always mess somting up when flashing.
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmware i had was 4.4.2
Silvershot said:
I recently rooted my I9195 successfully. i then flashed a custom kernel i found here on the forum (kernel v1 or sth like that) then my phone wouldn go past the boot white logo screen. i then tried flashing other kernels but they were apparently wrong as some features of my phone didnt work. i finally found the right firmware for my phone and tried to flash it with odin but it failed and now my phone only shows this message where it says that the firmware update failed and i have to use kies in recovery mode.
so i use kies and try the install firmware thing that asks you to put in your model and serial number. i do that and it says the device doesnt support initialisation. tried on another computer and it said that serial number was invalid.. i was very careful when typing it etc.
help.. what do i do?
btw last firmwar i had was 4.4.2
Click to expand...
Click to collapse
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
S3miniFin said:
I think you should put original back and start over and read forum more howto.
You use ODIN to flash custom rom, why? ODIN is for original rom. With custom rom need use TWRP or other recovery boot.
Click to expand...
Click to collapse
I used ODIN for past phones to flash custom kernels and it worked fine. i said i flashed someone that isnt supposed to be supported. i have no idea. i am not an expert and i thought someone can provide with a fast fix since there will surely be someone to have experienced this issue.
anyone else?
bump! please help.. i dont have another phone and I need to get this fixed asap!
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Silvershot said:
check my attached image.. i cant flash anything with odin. it gives me error fused 2 > binary 1
Click to expand...
Click to collapse
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
S3miniFin said:
How about download-mode? Never seen ODIN-mode myself, so cannot understand what is going on there....
With download- mode i do all things with ODIN if need...
Click to expand...
Click to collapse
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
S3miniFin said:
You don't need root phone before new kernel or custom rom. And i believe you use wrong files for that and now phone wont boot.
Start over with original ROM. With that you can test is your phone ok. Then use ODIN for recovery kernel and custom rom. Also check this:http://forum.xda-developers.com/showthread.php?t=2678420
Click to expand...
Click to collapse
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Your phone has official 4.4.2 Rom and you are currently using it. If you have Wi-Fi issues, your can try to flash custom kernel (Silviu, alexax)
Sent from my GT-I9190 using Tapatalk
Silvershot said:
that works, and it says downloading like normally when you try to flash something with odin, but it fails and gives me this error again: sw rev check fail: fused 2 > binarz 1
the rom im trying to flash is the DBT one in germany.
I am choosing AP btw, and not the other flash options.
Click to expand...
Click to collapse
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Silvershot said:
i flashed one of those roms and i got my phone to boot. i have no wifi. i guess it was the last rom i flashed which was the wrong one.
i now tried the one which is supposed to be the correct rom but i land on the same error again. can someone help me find the correct stock rom?
here are the current device info. it seems that there is no official 4.4.2 rom for my phone. so i ****ed up lol.
Click to expand...
Click to collapse
For Wifi problem could help if boot phone again after first setup.
ok now it wont go past the flashing SAMSUNG logo. i went and bought a huawei g play mini today. no more time trying to revive the s4 mini.
if someone wants to give it a try let me know and i'll ship it to you.
I will try it!
Plz sent me a PN (i'm german)
Sent from my GT-I9195 using XDA Free mobile app
S3miniFin said:
But why you use F.Reset Time -option? Clear that and try again.
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
For Wifi problem could help if boot phone again after first setup.
Click to expand...
Click to collapse
i tried rebooting the phone but it still is as slow as before. it peaks on 27mbit when i start the speedtest but then drops down to 19 or sth..
actually the download speed seems to be the problem. not the upload. now i forgot the network and connected again and its even slower