Which recovery should i use guys? U can see my current one below
CWM 6.0.1.2 non touch (Official) There should be no other choice!
rockstar_26 said:
CWM 6.0.1.2 non touch (Official) There should be no other choice!
Click to expand...
Click to collapse
THe thread don't say that its OFFICIAL, also the recovery says its CWM BASED. So was confirming
harsh.ea said:
THe thread don't say that its OFFICIAL, also the recovery says its CWM BASED. So was confirming
Click to expand...
Click to collapse
Also i asked something from u in this other thread http://forum.xda-developers.com/showthread.php?t=1903567&page=2 Please tell:fingers-crossed:
I've been using TWRP 2 forever, haven't had a single issue.
Sent from R'lyeh.
Clock work mod touch
Sent from my One V using xda app-developers app
I'm helping my friend install cyanogenmod on his sgh-i747m (telus), and we are having great difficulty. The phone is rooted, and TWRP 4.2.2 (or whatever's newest) is installed from the goomanager app. On everything he tries he gets a status 7 error. Phone is always wiped prior to flash, both internal and external memory have been tried, and the rom has been redownloaded several times. Even tried cm10 stable and PA 3.0.
Any suggestions? Could using cwm instead of twrp help? If so how do I replace twrp with cwm?
Going to sleep hoping there will be some suggestions in the morning. Thanks in advance.
Yeah try cwm. But that error usually means your on an outdated recovery. So make sure its the latest twrp
Sent from my SGH-I747 using xda app-developers app
Yeah, that's sounds like an outdated recovery issue. download rom manager and install cwm if you want to give that a shot.
LeonardLP said:
I'm helping my friend install cyanogenmod on his sgh-i747m (telus), and we are having great difficulty. The phone is rooted, and TWRP 4.2.2 (or whatever's newest) is installed from the goomanager app. On everything he tries he gets a status 7 error. Phone is always wiped prior to flash, both internal and external memory have been tried, and the rom has been redownloaded several times. Even tried cm10 stable and PA 3.0.
Any suggestions? Could using cwm instead of twrp help? If so how do I replace twrp with cwm?
Going to sleep hoping there will be some suggestions in the morning. Thanks in advance.
Click to expand...
Click to collapse
Yo can also get a status 7 if your phone is marked as a d2can. Some ROMs have a device check prior to flashing to prevent a brick. You have to install a recovery as a d2att and they'll flash.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Yo can also get a status 7 if your phone is marked as a d2can. Some ROMs have a device check prior to flashing to prevent a brick. You have to install a recovery as a d2att and they'll flash.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
^^^^^^true story
Flash a d2att recovery. TWRP latest is 2.4.2.0... So what you said seems right. If he got from too it will always flash the latest. Try to to find d2 art recovery. Its linked in the android development section under latest recoveries
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
hednik said:
Flash a d2att recovery. TWRP latest is 2.4.2.0... So what you said seems right. If he got from too it will always flash the latest. Try to to find d2 art recovery. Its linked in the android development section under latest recoveries
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The latest d2att TWRP just flash in recovery.
It's off the recovery thread.
http://forum.xda-developers.com/attachment.php?attachmentid=1700374&d=1359899101
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
The latest d2att TWRP just flash in recovery.
It's off the recovery thread.
http://forum.xda-developers.com/attachment.php?attachmentid=1700374&d=1359899101
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you, that recovery worked.
Hi
I have a Galaxy S3 SGH-I747M, which is already rooted and running 4.1.2. I just tried installing new ROMs on it via TWRP. First I tried Omni Rom kit Kat, then CM11, then CM 10.2, as well as 10.1. Every time it didn't work. I loaded the ROM and the corresponding GAPPS via SD card, wiped data, system, dalvik, cache, then tried installing from ZIP. I don't know why none of them worked. I read Omni ROM may not, and may only work on the ATT S3, but CM10 not working? I softbricked the phone a few times in the process, but was smart enough to back it up, and am currently at square one. Can someone help please?
I want CM11, or better yet Kit Kat!
Thanks in advance
Edit: I have the latest version of TWRP, 2.6. something
Sent from my Barnes & Noble Nook Tablet using Tapatalk
I had problems installing Roms too until I flashed the latest CWM.
Also, I don't recommend updating your ROM to stock 4.3 unless you have to.
I tried with CWM and got a status 7 error
Sent from my SGH-I747M using Tapatalk
jay_xander said:
I tried with CWM and got a status 7 error
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
What version of CWM are you using? You should be on 6.0.4.5.
I am using CWM 6.0.4.5
Sent from my SGH-I747M using Tapatalk
What errors are you getting during installation? You have a i747m or i747? The d2att is the i747 (i.e. s3 on AT&T)
I am getting status 7. I have the Rogers I747M, but the d2att I heard works for the M model as well.
Sent from my SGH-I747M using Tapatalk
Does the phone need to be unlocked? Does it have to do with the bootloader?
Sent from my SGH-I747M using Tapatalk
Under About Phone, what device do you have? Is it d2att?
I have SGH-I747M. Baseband version 4.1.2
Sent from my SGH-I747M using Tapatalk
So you're running a Bell or Rogers version of stock rooted 4.1.2?
I think so, pretty sure it's stock. Yes, it's rooted
Sent from my SGH-I747M using Tapatalk
jay_xander said:
I think so, pretty sure it's stock. Yes, it's rooted
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
I was on stock 4.1.2 and flashed to a stock 4.1.1, unlocked the phone using a free method and went back to stock 4.1.2.
I'm not sure why you're having problems. I flashed a stock 4.1.2 ROM from here for my Bell s3: http://forum.xda-developers.com/showthread.php?t=1739426
I then loaded Philz Touch Recovery and was able to flash Cyanfox, CM11, and Validus13 which are all based on 4.4.2.
I would avoid 4.3 bootloaders.
So it may be because the phone is locked? That seems to be the only difference between yours and mine. That and Philz touch recovery, but does the recovery program matter? I tried these ROMS with TWRP and CWM. Both latest versions
Sent from my SGH-I747M using Tapatalk
jay_xander said:
So it may be because the phone is locked? That seems to be the only difference between yours and mine. That and Philz touch recovery, but does the recovery program matter? I tried these ROMS with TWRP and CWM. Both latest versions
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
You mean carrier locked? That shouldn't make a difference.
Since you're on stock 4.1.2 and have never been on stock 4.3, you could also flash the 4.1.1 stock rom, carrier unlock your phone, flash Philz, and then try to flash a rom.
audit13 said:
I was on stock 4.1.2 and flashed to a stock 4.1.1, unlocked the phone using a free method and went back to stock 4.1.2.
Click to expand...
Click to collapse
You mean unlocked from the carrier? If you're saying being carrier locked is not relevant to flashing a new ROM, then the only difference is that you used Philz recovery. Man, I just want some KitKat already on my phone. The bootloader wouldn't have anything to do with this?
Sent from my SGH-I747M using Tapatalk
jay_xander said:
You mean unlocked from the carrier? If you're saying being carrier locked is not relevant to flashing a new ROM, then the only difference is that you used Philz recovery. Man, I just want some KitKat already on my phone. The bootloader wouldn't have anything to do with this?
Sent from my SGH-I747M using Tapatalk
Click to expand...
Click to collapse
If you're on stock 4.1.2, you should be fine. I had problems flashing with TWRP so I went with the latest release of Philz. I was able to flash 3 different KK ROMs.
Okay. I'm going to try Philz. Is there a good KK ROM you recommend? Also where can I find the Gapps for KK? I got it somewhere before, but I can't find it on goo
Sent from my SGH-I747M using Tapatalk
Which version of Philz do you use?
Sent from my SGH-I747M using Tapatalk
Get the tar or zip version from here. Tar can be flashed in Odin under PDA and the zip can be flashed from another custom recovery: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
More details and and installation instructions are here: http://forum.xda-developers.com/showthread.php?t=2201860
I like Cyanfox myself. You can download it from here: http://cyanfox-rom.com/downloads/?folder=d2att/
Gapps are here: http://cyanfox-rom.com/downloads/?folder=_gapps/
I'm using CWM 6.0.4.4
help me pls...
hellcowboy13 said:
I'm using CWM 6.0.4.4
help me pls...
Click to expand...
Click to collapse
Only with that information is not a big help. Anyway, the most recent one is CWM 6.0.4.5 http://forum.xda-developers.com/showthread.php?t=1446593
hellcowboy13 said:
I'm using CWM 6.0.4.4
help me pls...
Click to expand...
Click to collapse
Status 7 error usually connected to the CWM recovery version when flashing cm11 ROM. So, just update your current CWM recovery to the latest one (6.0.4.5) by arco as @ilusi0n_ said and it will be fine.
I understand that cm11 needs an updated recovery. Which one, and where can I get it. Thanks in advance!
TWRP 2.6.3.2: http://goo.im/devs/OpenRecovery/maguro/openrecovery-twrp-2.6.3.2-maguro.img
Or the newest CWM.
Sent from my Galaxy Nexus using XDA Premium HD app
I have toro, will the maguro recovery work?
Also, which cwm is the latest version? I downloaded cwm touch 6.0.4.3. Will that work to flash cm11?
(Bootloader is unlocked)
Mineturtle33 said:
I have toro, will the maguro recovery work?
Also, which cwm is the latest version? I downloaded cwm touch 6.0.4.3. Will that work to flash cm11?
(Bootloader is unlocked)
Click to expand...
Click to collapse
TWRP for Toro available separately: http://goo.im/devs/OpenRecovery/toro/openrecovery-twrp-2.6.3.2-toro.img
Latest CWM seems to be 6.0.4.7, but I heard 6.0.4.3 works. Trying won't hurt.
Sent from Google Nexus 4 @ CM11