I'm running the Eragon v6.7 rom - fantastic work by Skeleton.
I use the Elephone smart view cover and have 2 SIM's fitted.
I've become aware of what may be a small (but inconvenient) bug and wonder if anyone else has experienced this...
Phone is in standby and the screen is off.
Incoming call is received and phone rings. Display remains off - i.e. nothing visible in the round clock window.
I open the cover - display wakes up but still no call is displayed.
I unlock the screen using the fingerprint scanner.
When screen unlocked the incoming call is shown in the notification area at the top of the screen.
Should not the incoming call wake the phone and enable me to see which SIM and from whom the call is from?
Is there a setting somewhere I'm missing?
Does anyone running a stock ROM know if the issue/problem is there also?
By the way, if the screen is still active, i.e. the clock is visible in the smart view case window then the incoming call displays showing caller and which SIM.
Any comments appreciated.
Thanks
Mike
HI everyone...
Got a bit of an odd one here, hoping someone can help.
For some reason, when the screen on my Sprint S6 is off, any SMS notifications get cut off (or I don't get them at all). I am expecting both an audio and/or vibration notification. If I turn my screen on, I will get the full notification as expected.
I thought maybe this was a problem with the DOZE settings, but I disabled YAATA from Battery Optimization, and it didn't fix anything.
Then I thought maybe it was a YAATA problem, so I went back to the standard built-in SMS app. Same results... either a cut-off, or no, notification when the screen is off, and a full notification when the screen is on.
Anyone have any suggestions on something else I could look at?
(For the record, I'm running stock, non-rooted Sprint S6...)
Much appreciated!
OK, after this has bothered me for MONTHS... I post here, and then figure it out.
I also have Glimpse Notifications installed on my phone. I just opened the app, and saw the following:
"Android Marshmallow sometimes cuts off notification sounds when the display turns on. In this case select Delay Screen On in the Extras menu."
... which, oddly enough fixed it.
I'll leave this here rather than delete it in case it helps others in the future.
Hello people
I am facing the following issues in my phone which is running OxygenOS 3.2.1.
1. Push notifications not coming until the phone is unlocked again
2. Alert slider causing the phone to go completely silent.
To add to the misery I was using my wifi on 2.4 GHz band but when I tried to connect to 5GHz band it does not connect and the error shows wifi connection failure. All my other devices are connected successfully to this band even my 4 year old Nexus 4 but Oneplus 3 does not seem to connect for a single time
This is really becoming disappointed for me bow after push notification and alert slider issues.
The range of 2.4 GHz wifi is not even half of what my Nexus 4 used give me.
I am using ASUR WRT 68u router.
These are very basic features of a cellphone which are required on the very first moment.
I am Totally frustrated with this device as I can't use it for my daily life!!! I don't know if people in this forum are not having any such issues with their devices.
1. push notification can be blocked when the screen is locked (to avoid that other people can see SMS for example). In the "When device is locked" option, "show all notification content" should be selected if you want notification. Also the alert slider should be on the 3rd position, the position closed to the volume up button. If you want to use the middle slider position, you need to select some apps as priority apps for notification.
2. hmmm I think it's the purpose of the alert slider... especialy in the 1st position, the further to the volume up button.
It's strange you seems to misunderstand it as when you put in silent mode, it say "silent" on the screen. I put my phone in english to be sure, maybe the translation in your language is not accurate.
Anyway the slider mode can be customized in the alert slider options.
For wifi, it seems ok for me but I can't test 5GHz at the moment.
1. Not sure if I see this behaviour but if I do isn't botherimg me.
2. I know put slider to silent and it silences the phone, this is probably my favourite feature of the phone. Completely silence the phone without even taking it out of my pocket genius.
3. Sent on my 5ghz WiFi connection.
Le_Zouave said:
1. push notification can be blocked when the screen is locked (to avoid that other people can see SMS for example). In the "When device is locked" option, "show all notification content" should be selected if you want notification. Also the alert slider should be on the 3rd position, the position closed to the volume up button. If you want to use the middle slider position, you need to select some apps as priority apps for notification.
2. hmmm I think it's the purpose of the alert slider... especialy in the 1st position, the further to the volume up button.
It's strange you seems to misunderstand it as when you put in silent mode, it say "silent" on the screen. I put my phone in english to be sure, maybe the translation in your language is not accurate.
Anyway the slider mode can be customized in the alert slider options.
For wifi, it seems ok for me but I can't test 5GHz at the moment.
Click to expand...
Click to collapse
I think you misunderstood me. Here are your replies:
1. The push notification issue is a doze mode bug since the notifications do appear and the sound plays ok until the device enters into doze mode after which there is no notification and no connectivity maintained which causes the notifications to stop, once the phone is unlocked the notifications start to appear
2. Well I know the purpose of alert slider and I am talking about when the slider is is normal position i.e. downwards, sometimes the notification sounds disappear and there is complete silence, the slider has to be cycled again by moving upward then downward to fix the issue.
for the slider, wipe your phone completely, reset it in other words.
If your slider bug still there, contact oneplus customer service to replace your phone.
and your first problem seems to be related to the second one as it enter the silent mode on it's own.
Le_Zouave said:
for the slider, wipe your phone completely, reset it in other words.
If your slider bug still there, contact oneplus customer service to replace your phone.
and your first problem seems to be related to the second one as it enter the silent mode on it's own.
Click to expand...
Click to collapse
I have completely wiped off the phone and installed 3.2.1 from the signed flashable zip... the wifi issue is still there
I will check and update about the first two issues if they're solved... I have contacted customer support but they have not provided a satisfactory response yet.
When I upgraded to 3.2.1, I had the same issues as stated above AS WELL AS an issue with VoLTE that forced me to disable LTE in order to have a decent phone call. I reverted back 3.1.2 until OnePlus gets these issues ironed out. Overall, 3.1.2 has been much better for me.
I have installed freedomOS from xda and stock ROM again.. wifi issue is resolved but push notification and alert slider issues still persist in freedomOS as well as stock ROM.. I don't have VoLTE feature here so can't test
About the random silence, did you restore apps and settings from old phonethat had automatic disturb profiles? If so, reset and do not restore...
I'm not experiencing any of these issues, only issue is the random turn off
Many times after completing a call, moving the phone away from my ear, the clock alarm setup is displayed and I have clear it. Apparently somehow I am activating it during the call. For the life of me, I can not determine how it happens.
Anyone else experience the same, and if so, how do you prevent it from occuring?
TIA
mgp53 said:
Many times after completing a call, moving the phone away from my ear, the clock alarm setup is displayed and I have clear it. Apparently somehow I am activating it during the call. For the life of me, I can not determine how it happens.
Anyone else experience the same, and if so, how do you prevent it from occuring?
TIA
Click to expand...
Click to collapse
If you swipe down from the status bar to show the notifications panel then tap on the time, it will take you to the alarm panel for the clock app. Maybe something is keeping the screen active even though it's off for the call. The swipe or double tap to wake feature on some of the custom kernels can keep the screen active for touches even though the screen is off
I've just noticed while in call that the call Timer that's usually in the status bar next to the clock covering up notifications has gone! I've now got a floating button that you can expand as seen in the screen shot, never had this before. I had a notification saying the phone was displaying over the top of apps and allowed me to toggle it off, I did this but the clock timer never reappeared back in the status bar (maybe because I was still in the call)
I prefer it this way, I have seen other post complaining about the call Timer covering up notifications. Google must be listening.
Fyi, I'm in the Beta programme for the phone app.
Anybody else notice this?
Edit: rebooted my phone and made another call the timer is back... I'm confused now...