Related
A bit of caution when picking out screen protectors
I had to cut the edges on my AT&T screen protectors due to the nature of the soft back which when pressure is applied to the front causes lifting on the screen protector's 4 corners. The dimensions are fine but the radius is too small for the corners causing them to protrude ... just cut them a little but I would have preferred to have 100% perfect screen protectors instead of half assed ones from AT&T ... why am I not surprised.
sentinel79 said:
A bit of caution when picking out screen protectors
I had to cut the edges on my AT&T screen protectors due to the nature of the soft back which when pressure is applied to the front causes lifting on the screen protector's 4 corners. The dimensions are fine but the radius is too small for the corners causing them to protrude ... just cut them a little but I would have preferred to have 100% perfect screen protectors instead of half assed ones from AT&T ... why am I not surprised.
Click to expand...
Click to collapse
I purchased the same protector. I have the same issue as well. Makes it look really cheap with the corners sticking up.
I had that, plus since I am opening mine a LOT for hacking, the bottom looks like crap.
Looks like I am going to replace the protector within a week of getting the phone.
Just wrap the whole phone in plastic wrap with the back off. Then slip it on.
Bad idea most likely, but it would be funny if it worked well.
same issue. Trimmed the corners. It doesn't look that great, but doesn't peel up when i hit the corner on something. I'm on the third protector already. First one i screwed up the orientation and got dust under it when fixing. second peeled up when i hit one of the corners.
must be those poor quality screen protector. there us not much of an option atm. i would rather get a HTC HD mini screen protector and punch a hole on it.
I just had Ghost Armor put on my iPhone 3G (which I'm handing to my daughter when my Aria comes in). It's pretty nice, but the Aria isn't showing up on their website yet. And you would only really want to get the screen done, since you open up the phone to get to the battery and the SD Card.
Yep, I cut them carefully and used the scotch tape method to get perfect placement.
-------------------------------------
Sent via the XDA Tapatalk App
sentinel79 said:
Yep, I cut them carefully and used the scotch tape method to get perfect placement.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Can you elaborate on the "scotch tape method"?
I ordered invisible gadget guard from amazon. Havent put it on yet, but that packaging sure makes it look impressive.
Before separating the films I placed tape to use as handles to apply the protector flat (instead of holding it).
Then after layed down on the screen pulled up and slid tape underneath to attract any particles which cause bubbles. Slide with sticky side face up so it pulls from the protector's sticky film (rarely do the particles stick to the screen itself).
Sent from my HTC Liberty using XDA App
Has anybody noticed the quality of these are not that great?
Have had on for 3 days. There are a LOT of scratches on the protector itself. I usually keep phone in jean pockets with a wallet.
Anybody plan on trying the Amzer ones, although I have heard their quality may be dubious too for the n1.
Shad0wguy said:
I ordered invisible gadget guard from amazon. Havent put it on yet, but that packaging sure makes it look impressive.
Click to expand...
Click to collapse
I ordered this, and it shipped today. I got my 8 GB card in the mail today, too. I kind of wished I had gotten a 16 GB card, since my whole music collection is about 8 GB. But I may pick up another 8 GB as my "backup film roll" at a later time.
Donatron said:
I purchased the same protector. I have the same issue as well. Makes it look really cheap with the corners sticking up.
Click to expand...
Click to collapse
I can't believe I didn't figure out this solution earlier. Obviously, trimming the excess on the corners would solve the issue, but I wasn't comfortable using a razor blade to make the trims. But just 5 minutes ago, it occurred to me to use a nail clipper (while already installed on the phone, and the back plate removed). Worked perfectly, was super easy, and did no damage to the phone.
Yeah that didnt occur to me either. I used small crafting scissors.
Sent from my HTC Liberty using XDA App
Same thing happened to me, just on the bottom corners though, but as soon as I put my case on it covered up those bubbles, cant even see it. Quality of the protector seems to be decent. I used a universal one prior and it was ****!
I ordered the stealth guard though for the phone (full body protection) just now so when that comes I'll let you guys know how that works out as well.
I used the Invisible Gadget Guard that someone else mentioned (got it off ebay though, not amazon, it's the exact same one however). The quality of it is definitely top notch, I've had it on for a little over a month now and it has no scratches/marks that are visible without actually looking for them and even then there are minimal and very minor ones. My one complaint with it is the top two corners did start to peel a bit, I ended up peeling it up a tad and cutting them (with difficulty, this thing is tough!) and reapplying that part and I haven't had a problem since! I do have a few blemishes down the left side due to my clumsiness during the initial applicaton, but the case covers it for the most part
i tried the invisisheild and did not like the rubbery feel, got at t sheild it is a hard plastic and fingers slide much better, yes i had to trim but no big deal there. all you have to do is put the protector on the phone with back cover off, then take a new sharp razor blade at about 50 degree angle to the edge of glass and trim excess off. 3 months now and have not lifted any corners. these are much better than the rubber vinly covers that tend to stretch and need trimming as well.
So, screen sizes getting bigger seems to be making it more and more difficult to apply a screen protector without getting any stray cat hairs or dust in between it and the screen. How do you guys do it, or do you just put up with a bit of dust?
I just got a wet application screen protector today since that was the last kind of protector I successfully applied to a phone (long ago), but that was a no go. It seemed fine until I was done and realized that somehow, from some where, a bunch of hairs got under the protector. I tried to use some tape to get them off but it didn't work, and then I dropped the protector and things just got worse from there.
This was in the bathroom after taking a steamy shower as I have read over and over that it's supposed to get most of the crap out of the air.
How do you guys do it? I have looked it up several times, but I just don't get how these people have such an easy time of it.
I use painters tape after I clean the screen (before applying of course) to make sure no other dust or hairs are on the screen. Use a can of air to blow away crap in your work area also.
Sent from my Galaxy Nexus using xda premium
I'm really really good at applying screen protectors (wet application) because I started using Invisible Shield when they first came out about 10 years ago.
The trick is to not use their solution, as they only give you like a tiny vial of solution.
1. Get a plastic cup (I use one of those red beer-pong cups), fill it with warm water to the top, put 2 drops of dish detergent in, swirl your finger in it. That is your solution.
2. Remove the protector from the backing, dip the entire thing into the cup, place it on your screen. You should be able to easily move the protector around the screen to adjust positioning. If you cant, take it off, dip the whole thing in the solution again, and put it on the screen again. Yes, your device will get very wet, but do not worry... it's not a problem at all (I've done this to tons, and I mean tons, of phones/cameras/gps, etc...) Don't worry.
3. Once you're happy with the positioning, use a credit card to squeegee out the water in between. Adjust positioning again to make sure it's perfect, squeegee again. Squeegee a few more times, make sure you've gotten as much water out as possible. If your device has rounded corners (such as the back of the note 2 cover), after you squeegee out all the water the corner will still stick up. Put your finger on each corner for a few seconds, maybe 20-30 seconds if necessary. It will stick.
4. Done. It will be invisible, you will not notice a thing on your phone.
Kobe_No_Means_No said:
I'm really really good at applying screen protectors (wet application) because I started using Invisible Shield when they first came out about 10 years ago.
The trick is to not use their solution, as they only give you like a tiny vial of solution.
1. Get a plastic cup (I use one of those red beer-pong cups), fill it with warm water to the top, put 2 drops of dish detergent in, swirl your finger in it. That is your solution.
2. Remove the protector from the backing, dip the entire thing into the cup, place it on your screen. You should be able to easily move the protector around the screen to adjust positioning. If you cant, take it off, dip the whole thing in the solution again, and put it on the screen again. Yes, your device will get very wet, but do not worry... it's not a problem at all (I've done this to tons, and I mean tons, of phones/cameras/gps, etc...) Don't worry.
3. Once you're happy with the positioning, use a credit card to squeegee out the water in between. Adjust positioning again to make sure it's perfect, squeegee again. Squeegee a few more times, make sure you've gotten as much water out as possible. If your device has rounded corners (such as the back of the note 2 cover), after you squeegee out all the water the corner will still stick up. Put your finger on each corner for a few seconds, maybe 20-30 seconds if necessary. It will stick.
4. Done. It will be invisible, you will not notice a thing on your phone.
Click to expand...
Click to collapse
Will this work with SGP Ultra Crystal screen protector? or are they only the non-water applyable?
Can't speak specifically for the sgp but I've been using the wet application method on all my dry application protectors for some time across at least 5 different phone models with no issues. Much easier to apply accurately than dry
Sent from my SGH-T889 using Tapatalk 2
degeneration said:
So, screen sizes getting bigger seems to be making it more and more difficult to apply a screen protector without getting any stray cat hairs or dust in between it and the screen. How do you guys do it, or do you just put up with a bit of dust?
I just got a wet application screen protector today since that was the last kind of protector I successfully applied to a phone (long ago), but that was a no go. It seemed fine until I was done and realized that somehow, from some where, a bunch of hairs got under the protector. I tried to use some tape to get them off but it didn't work, and then I dropped the protector and things just got worse from there.
This was in the bathroom after taking a steamy shower as I have read over and over that it's supposed to get most of the crap out of the air.
How do you guys do it? I have looked it up several times, but I just don't get how these people have such an easy time of it.
Click to expand...
Click to collapse
I read some where that you should apply it in a bathroom and before you start get a spray bottle and put water in it. A couple sprays in the air before... No dust works for me
Sent from my SGH-T889 using XDA Premium
Well I just got 2 more cheap protectors in the mail, the first one I tried to get perfect, and each time I tried to get rid of a piece of dust it would get worse. The second one I have one bubble and I gave up. Fine. I have a bubble... oh, and they are cheapo reflectors, and supposed to be matte... so now my screen looks pretty horrible. Sigh. Whatever, my screen is protected. I will get an SGP later and figure something out in the mean time... maybe take them to a tmo store since they did it for me last time and it came out perfect somehow. I think my house is just too dusty, and there's no way to change that. I live in the desert, I have cats, the place is old. Sigh.
omg just did both of the note 2's and it took about 30-40 minutes, ridiculous, but afterwards looks nice till today i had the damn T-Mobile protector on it lol i got tired of seeing T-Mobile =P
Here's the trick for me. I got in the bathroom turn on the shower for a good few minutes. (Hot water) because the humidity in the air will get rid of most of the dust. Then you apply your screen protector by 1st.
Positioning it first without taking off the adhesive side (to know where the edges should be)
2nd.
You must not use a credit card to squegee out bubbles that'll scratch the screen, if you are put a microfiber cloth over the credit card so you'll be pushing down with the cloth not the card
Sent From the Van Down by the River
phreshjoker said:
Here's the trick for me. I got in the bathroom turn on the shower for a good few minutes. (Hot water) because the humidity in the air will get rid of most of the dust. Then you apply your screen protector by 1st.
Positioning it first without taking off the adhesive side (to know where the edges should be)
2nd.
You must not use a credit card to squegee out bubbles that'll scratch the screen, if you are put a microfiber cloth over the credit card so you'll be pushing down with the cloth not the card
Sent From the Van Down by the River
Click to expand...
Click to collapse
Well i did it at my dining table and i regretted doing so because I ended up getting a few particles underneath, but all you need to do at that point is take any type of sticker (mine came with 2 stickers which were called Dust Removal stickers, but its truly a regular sticker lol) so I had to use that several times, but the final result is great
I ended up ordering the SGP Ultra Crystal and also ordered MobC from amazon (http://www.amazon.com/gp/product/B009M7TZYO/ref=oh_details_o00_s00_i00) which ended up coming in first, so I am still waiting for the SGP but honestly i do regret ordering them because the MobC are freakin great, crystal clear, and i have no regrets of putting it on!
Kobe_No_Means_No said:
I'm really really good at applying screen protectors (wet application) because I started using Invisible Shield when they first came out about 10 years ago.
The trick is to not use their solution, as they only give you like a tiny vial of solution.
1. Get a plastic cup (I use one of those red beer-pong cups), fill it with warm water to the top, put 2 drops of dish detergent in, swirl your finger in it. That is your solution.
2. Remove the protector from the backing, dip the entire thing into the cup, place it on your screen. You should be able to easily move the protector around the screen to adjust positioning. If you cant, take it off, dip the whole thing in the solution again, and put it on the screen again. Yes, your device will get very wet, but do not worry... it's not a problem at all (I've done this to tons, and I mean tons, of phones/cameras/gps, etc...) Don't worry.
3. Once you're happy with the positioning, use a credit card to squeegee out the water in between. Adjust positioning again to make sure it's perfect, squeegee again. Squeegee a few more times, make sure you've gotten as much water out as possible. If your device has rounded corners (such as the back of the note 2 cover), after you squeegee out all the water the corner will still stick up. Put your finger on each corner for a few seconds, maybe 20-30 seconds if necessary. It will stick.
4. Done. It will be invisible, you will not notice a thing on your phone.
Click to expand...
Click to collapse
degeneration said:
So, screen sizes getting bigger seems to be making it more and more difficult to apply a screen protector without getting any stray cat hairs or dust in between it and the screen. How do you guys do it, or do you just put up with a bit of dust?
I just got a wet application screen protector today since that was the last kind of protector I successfully applied to a phone (long ago), but that was a no go. It seemed fine until I was done and realized that somehow, from some where, a bunch of hairs got under the protector. I tried to use some tape to get them off but it didn't work, and then I dropped the protector and things just got worse from there.
This was in the bathroom after taking a steamy shower as I have read over and over that it's supposed to get most of the crap out of the air.
How do you guys do it? I have looked it up several times, but I just don't get how these people have such an easy time of it.
Click to expand...
Click to collapse
For with app screen protectors...exactly as Kobe mentioned. Couple of drops / 1 part dish washing liquid to 5 parts water (distilled water if your tap water has too much minerals)...just so the solution is slippery enough for the application process. Run your finger nail down the edge of the credit card / tool your going to use to ensure there are no nicks / sharp edges that will damage / crease your wet app screen protector.
Steamed bathroom also helps.
I recommend dry applications for flat surface...wet applications for curved surfaces.
With dry app screen protectors, those clear / ultra clear packs off of eBay usually work well. The only issues I have seen is that the adhesive may get weak over time (if you need to lift protector to remove dust then press down again) and initial cutouts maybe hard to see from pics. Eventually these dry app screen protectors fall to 3/5/? packs per <$1 ???
Position the dry app screen protector then apply / remove film. There will probably be dust, pet hair, etc. Lift up one corner / side / section at a time and slide the shipping tape between the screen protector and screen (sticky side of shipping tape against sticky side of screen protector)...then press dry screen protector down on the shipping tape which will also press against the screen. Carefully lift the corner / section of the screen protector...then flip the shipping tape over and slide back under between the screen protector and screen (sticky side of shipping tape now facing screen) if needed. Usually the particle is on the sticky screen protector side, but sometimes it maybe stuck to the screen side. The idea is to use a shipping tape with strong enough adhesive to remove the particle without ripping off / damaging the screen protector adhesive. Painting tape adhesive maybe too weak in removing any dust / pet hairs...UPS grade shipping tape maybe too strong...I like Staples equivalent shipping / packing tape...it has just enough adhesive strength to remove any dust / pet hairs.
Hope some of this helps.
What works for me:
http://forum.xda-developers.com/showthread.php?t=1988725
Got my spigen... I am probably never buying from anyone else. Well, I dunno, but from the packaging to the application I felt like I was using quality. I thought I had ordered the ultra crystal but I actually went for ultra oleophobic for some reason... and I am crossing my fingers that the surface tension changes after some use (doubt it) but it does do what it says, finger prints do not stick. However the down side is the s pen doesn't feel nice against it (it did feel really nice against the crappy matte protector, felt like a pencil on paper, but I couldn't stand the rainbow effect, maybe I will try a spigen matte in the future). Any way, I used the "hinge" technique I saw somewhere online and it worked pretty well. Got 3 pieces of dust under the screen (1 on the screen, 2 on the bezel) and I used some scotch tape to life the protector and one of the included dust removal stickers to quickly take care of the problems.
the protector is FREAKING INVISIBLE! right now the screen is off and I can see reflections, and I can barely make out where the protector ends.
Thanks for everyone who gave me their tips and tricks, I finally have a screen protector on my note that I am happy with.
Also, for those people going naked, it doesn't affect my screen but I saw I already have 2 minute scratches on my screen. I keep my phone in my pocket on its own, and somehow I managed to scratch the screen already (got on release day). I have wasted a bunch of cash getting a screen protector on that I was happy with, and I might spend more in the future, but at least I know that if anything terrible happens I can replace the little piece of plastic instead of forever having to deal with a scratch.
EDIT: playing around with it some and then wiping it off, I already am fine with how the S pen feels. I think it was actually sticking to whatever they used to apply the outer layer of protection that you remove after applying the protector. A little bit more drag then on the naked glass, but I like that I can now get more of a tactile response of my writing. I am hooked on Spigen.
I do all my screen protectors at the dinning room table in about 2 mins with perfect results every time. I attached a few screenies but they really don't do it justice. It is insanely hard to get a good picture of something clear when using a flash. the specks of dust that are noticable are on top of the protector not underneath. I'm using the spigen oleophobic and love them.
i just installed my glas.tr nano yesterday. i have no major bubble issues, but i do seem to be having one minor issue along the top left edge of the screen. i have several very small bubbles all clustered together. it almost looks like there's a lack of adhesive in that particular area. i won't be able to get any photos until later this evening as i'm at work right now, but i'll be sure to toss up some shots as soon as i'm able.
i've squeegee'd the living crap out of the spot to no avail. now perhaps i just need to give it another day or two to settle, but something tells me this cluster of bubbles isn't going to clear up on it's own.
i'm curious as to whether or not anyone else has been experiencing issues with the glas.tr nano?
namurt said:
i just installed my glas.tr nano yesterday. i have no major bubble issues, but i do seem to be having one minor issue along the top left edge of the screen. i have several very small bubbles all clustered together. it almost looks like there's a lack of adhesive in that particular area. i won't be able to get any photos until later this evening as i'm at work right now, but i'll be sure to toss up some shots as soon as i'm able.
i've squeegee'd the living crap out of the spot to no avail. now perhaps i just need to give it another day or two to settle, but something tells me this cluster of bubbles isn't going to clear up on it's own.
i'm curious as to whether or not anyone else has been experiencing issues with the glas.tr nano?
Click to expand...
Click to collapse
i've placed an order for the, Spigen GLAS.tR NANO SLIM Glass Screen Protector yesterday.
is it the updated version of the glass that u are using?
yeah, that would be great if you could post some pictures of your display.
If you look closely at the N5's glass under reflection, you can tell that the glass is not flat. There are minor curves on the glass.
The glass protectors are designed with adhering to a piece of flat glass in mind; the minor bumps on the glass may cause the protector to not adhere properly.
You may try to use a clamp to hold the protector in place for a while for the adhesive to settle.
timothyung said:
If you look closely at the N5's glass under reflection, you can tell that the glass is not flat. There are minor curves on the glass.
The glass protectors are designed with adhering to a piece of flat glass in mind; the minor bumps on the glass may cause the protector to not adhere properly.
You may try to use a clamp to hold the protector in place for a while for the adhesive to settle.
Click to expand...
Click to collapse
Not sure I agree with this. My glass.t is on with ZERO bubbles. You have to be extremely careful when putting them on however, it's very difficult not to get dust trapped underneath during application.
se1000 said:
Not sure I agree with this. My glass.t is on with ZERO bubbles. You have to be extremely careful when putting them on however, it's very difficult not to get dust trapped underneath during application.
Click to expand...
Click to collapse
How un-flat the glass is is different on every phone; it's like those hand-made glassware. Your phone's glass probably is relatively flat so the protector adheres very well.
I have this same issue with clusters of bubbles in the black areas but its with the Nillkin Tempered glass protector (They are all relatively the same thing). Is yours on centered and all or is it a little off?
@Mythos123 - i'm not aware of there being an "updated" version of the tr nano. i know there were signifcant bubble issues with the t and tr slim, but it's my understanding that the issue was corrected before spigen pushed out the nano line.
@timothyung and @se1000 - i suppose uneven glass could be the culprit, but i'm moreso inclined to believe it's an issue with the protector itself. of course, a picture is worth a thousand words, and i'll get a few pics posted as soon as i'm able, but this doesn't look like the protector is just not hitting the glass due to unevenness. it looks like the edge doesn't have enough adhesive to keep the protector stuck down.
@Nocturnal86 - it's on as perfectly straight as i can manage to get it, and i'm very OCD.
just in general, it looks like the protector has a tough time adhering near edges. even the speaker grille cut-out doesn't look stuck down all that well to me, although i do have one piece of dust there that i need to deal with.
namurt said:
@Mythos123 - i'm not aware of there being an "updated" version of the tr nano. i know there were signifcant bubble issues with the t and tr slim, but it's my understanding that the issue was corrected before spigen pushed out the nano line.
@timothyung and @se1000 - i suppose uneven glass could be the culprit, but i'm moreso inclined to believe it's an issue with the protector itself. of course, a picture is worth a thousand words, and i'll get a few pics posted as soon as i'm able, but this doesn't look like the protector is just not hitting the glass due to unevenness. it looks like the edge doesn't have enough adhesive to keep the protector stuck down.
@Nocturnal86 - it's on as perfectly straight as i can manage to get it, and i'm very OCD.
just in general, it looks like the protector has a tough time adhering near edges. even the speaker grille cut-out doesn't look stuck down all that well to me, although i do have one piece of dust there that i need to deal with.
Click to expand...
Click to collapse
sorry for the misunderstanding, what i meant was that the t and tr slim got updated.
give it a day or two, perhaps the problem fixes itself...hopefully...
sorry guys, but forget the pics. :/
the OCD in me just wouldn't let the bubbles go so i tried to remove and re-apply the protector. totally should've snapped photos first, doh!
anyway, the re-application was a double-edged sword. i fixed bubbles along one edge, but then introduced new bubbles along a different edge. i think maybe i'm just getting dirt on the edges with my fat fingers since this nano is so damn slim, hah! i may order another after a few months, but i think i'm going to stick with the one i've got for now. it feels great, and the screen is beautiful.
damn, looks like it's hard putting this thing on without getting any kind of issues...
what is the best way, any pro tips?
Sent from my Galaxy Nexus
Mythos123 said:
damn, looks like it's hard putting this thing on without getting any kind of issues...
what is the best way, any pro tips?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Run the shower for 20-30 minutes to get alot of steam built up, use a couple of pieces of tape on one side so you can do the hinge method of application and get your fingertips sufficiently wet so that you don't leave any fingerprints on the adhesive side of the screen protector should you accidentally touch it. The steam in the air in the bathroom will eliminate most dust from getting in and as long as you really make sure the screen is OCD clean with no dust particles, you should come out with a beautiful perfectly centered application.
Watcher07 said:
Run the shower for 20-30 minutes to get alot of steam built up, use a couple of pieces of tape on one side so you can do the hinge method of application and get your fingertips sufficiently wet so that you don't leave any fingerprints on the adhesive side of the screen protector should you accidentally touch it. The steam in the air in the bathroom will eliminate most dust from getting in and as long as you really make sure the screen is OCD clean with no dust particles, you should come out with a beautiful perfectly centered application.
Click to expand...
Click to collapse
for the love of god and all that is holy, why didn't i do this?
i'm gonna get another glas.tr nano and follow these instructions to the letter. i know i just messed mine up as a result of user error. :/
Watcher07 said:
Run the shower for 20-30 minutes to get alot of steam built up, use a couple of pieces of tape on one side so you can do the hinge method of application and get your fingertips sufficiently wet so that you don't leave any fingerprints on the adhesive side of the screen protector should you accidentally touch it. The steam in the air in the bathroom will eliminate most dust from getting in and as long as you really make sure the screen is OCD clean with no dust particles, you should come out with a beautiful perfectly centered application.
Click to expand...
Click to collapse
This.
Just installed my glas.tr nano, and other than one small piece of dust I carelessly allowed to get trapped between it and the screen, it is literally perfect. I ran the shower, and used the hinge technique, but I don't think I ran the shower long enough.
Someone said in one of these threads 'feels better than the naked screen', and I agree. The naked nexus 5 screen feels a bit sharp at the edge, the tr nano has a similar nice felling to the naked nexus 4 screen, which I always kept naked because any screen protector ruined that nice feel.
Sent from my Nexus 5 using Tapatalk
This version rocks, no bubbles and the feeling us perfect
VIVAN las Tapas
I have to have it perfect, but i always end up with dust/dirt bubbles, or it`s not aligned correctly.
I would pay to mine fitted perfect, why does somebody not set up a business fitting them.
Phone shop`s should offer the service for a small fee.
I usually buy a cheap pack or 6-10 as i throw a lot away, or still end up not having one fitted.
John.
Tinderbox (UK) said:
I have to have it perfect, but i always end up with dust/dirt bubbles, or it`s not aligned correctly.
I would pay to mine fitted perfect, why does somebody not set up a business fitting them.
Phone shop`s should offer the service for a small fee.
I usually buy a cheap pack or 6-10 as i throw a lot away, or still end up not having one fitted.
John.
Click to expand...
Click to collapse
For dry applies, look up the hinge method on Youtube, it makes applying screen protectors a breeze, and gets things perfect every time the first time. As far as dust goes, I recommend shining a LED flashlight around the screen, and using a piece of tape to spot remove every last bit of dust just prior to peeling the screen protector's 1st side up.
For wet applies, I find that I get better results by not using any soap, and just using water by itself. Less chance of it appearing cloudy or hazy after it dries. The key is to use liberal amounts of water to keep the protector sliding.
Every time I install one I screw it up so I finally gave up and just started picking them up at the AT&T store and let them do it. Ordered a mime ghost glass a while back and was heading down to the AT&T store to see if they would install it, but stopped at Radio Shack on the way there and those guys were more than willing to install it for me also. The guy said the mime is much easier to install because its more solid and not like those flimsy cheap ones you buy elsewhere. Seems most places that sell them aint got no problem installing them if they aint all tied up with other stuff.
Thats the problem. the cheap ones do not stick as well as the ones from good companies such as Spigen, MediaDevil, martin fields
glass protectors are the thing now, MIME feather glass from the USA is the best
Tinderbox (UK) said:
I have to have it perfect, but i always end up with dust/dirt bubbles, or it`s not aligned correctly.
I would pay to mine fitted perfect, why does somebody not set up a business fitting them.
Phone shop`s should offer the service for a small fee.
I usually buy a cheap pack or 6-10 as i throw a lot away, or still end up not having one fitted.
John.
Click to expand...
Click to collapse
I would use the hinge method for placement, as far as the dust/dirt try the shower method. Run the shower for five minutes with the door closed on hot (allows steam to form). Turn off shower and allow the steam to settle (2-3) minutes, this pulls the dust and dander out of the air. Then apply the screen protector to the handset.DO NOT leave the handset in the bathroom while the rooms fills with steam or when it is settling. I did not believe this method would work but I have used it on my Rezound, Droid X, Nexus 7 tablet and my HTC One with dust/hair free installs.
I used to be clumsy at it, but now I fit mine flawlessly. I have done it with 3 phones and 2 tablets and all of them were bubble free. My rule, keep the device under a light so you can see the dust particles or anything else clearly. Wipe it with micro fiber (or use alcohol wipes if the surface is smudgy). Use a scotch tape to remove the dust particles, small strokes, even in the areas which look clean. It takes 2 minutes to cover the whole device. Align the screen protector across the edges and work your way down, making sure the sides align and are in straight line. You will get bubbles which you can then remove using a credit card by wiping them towards the edges. Works for me everytime.
I work at a cellphone store and whenever someone buys a screen protector we install them for free glass or plastic:laugh:
what I find is the easiest method of applying a film screen protector and worked for me for 2 years whilst working in a vodafone store is the following:
1) ensure the screen is clean of dust, a good cloth in a relatively clean environment does the job, if not do it near a boiling kettle.
2) before peeling off the first layer line the screen protector up along the top of the handset, where you would like it begin. (for the htc one, it would be just below the top speaker grill),
3) peel back the first layer only slightly, line and up press down adhesive side with the top of the handset, easiest done with the top of the handset facing away from you. (benefit of this is, you've pulled the whole thing off and it's less likely to catch dust if only a small part of the protector is visible to wilderness.
4) with the top of the protector adhered to your screen, swivel the phone around so the top is closest to you without letting the protector move from it's position,
5) from here, it is a simple task of taking a piece of cardboard or hard paper and gently push forward from the top, whilst slowing peeling back the bottom plastic until you're at the bottom.
6) you may have some small bubbles right on the bottom edge of your protector, just use your thumb or the paper to gently squeeze them out.
Works for me 90% of the time. Also depends somewhat on the quality of the protector. But I would recommend a Glas.Tr or MIME type protector.
I love that dust remover that came with the mime. I covered the whole screen, ripped it off and put the glass one on in less than a second.
I bought mine from mobilefun.com. Don't remember exactly which, but it was one of the "premium" ones (not cheapest). From a 5-pack I got it perfect on the 4th try! Be patient and read the insructions carefully (which I didn't before the 3rd try) hehe ...
OK, i read no instructions apart from which tab to pull of first on the protector, i cleaned the screen with the included cloth, no steamy room or anything, it took me five attempt's to get the protector in the right place and there were bubbles galore, but i managed to get them all out, no dust underneath that i can see so i wasted no screen protectors i still have two left.
John.
Three things are recommended, dust removing sticker, microfiber cloth and a room with heated vapor such as a bathroom, after you have showered(dont take device in during shower).
I got some cheap matte ones from eBay... They are truly awsome and fit the whole screen(you must be pro master on fittin screen protectors)
http://www.ebay.com/itm/35084675949...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
My secret for fitting perfectly is to hold your screen down after wipin all the dust while getting the protector ready itself... Once I put it on without any dust under ir, I press it very hard and move it in direction where I need if not correctly positioned... When its just sticked on, you can still move it slighty - thats all it takes to get those 0,1mm right
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”)Shock Resistant
Compliant with a military standards test (MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”). Device may not perform as tested in all conditions. Test performed in controlled environment. Do not attempt.
Click to expand...
Click to collapse
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
From dbrand
Robot 077 (dbrand)
Apr 13, 15:55 EDT
Hey ######!
Thanks for reaching out. Unfortunately, we have no plans to support the LG G8 ThinQ, as there is simply not enough demand to justify adding it to our portfolio at this time. Sorry about that. Let us know if there is anything else we can help with, and have a great day!
Signed,
A Robot
Click to expand...
Click to collapse
screen protector
https://www.youtube.com/watch?v=9EDYQG6Q7JY
i found this to be a good review of the BodyGuardz Pure Arc Curved Tempered Glass Screen Protector for the G8 ThinQ
i thought it was a shill channel looking at other reviews, but he seems to hate this. it fits GREAT, but only has adhesives on the sides and has a visible dot matrix.
on top of that, he says there is an unnatural hollow feel to it due to the adhesive not being full screen. i imagine this will negatively affect the oled speaker.
this is a $50 screen protector that AT&T is giving away as a part of a promotion.
skins... not much out there and only dbrand has responded (with a NEVER).
the Invisible Phone Guard screen protector was OK and visibility was good, but i found the sound to be very slightly muffled as if it is dampening a certain high frequency.
i'm keeping the back on until i find a decent skin.
this film seems like it will blemish easily. it certainly gets dirty easily. pics here...
Having this phone for a few days now and the OP was not lying about how slippery this phone is. A case or skin is a definite must have!
Ordered a Ringke Fusion X.
Sent from my LM-G820 using Tapatalk
I ordered this case - https://www.ebay.com/itm/273759783563 - I should be getting it later today, I'll post about how well it works.
No sooner did I post this than it came in the mail. Fits on easy, stays on snugly. It's matte rubber without feeling like you're holding a car tire. I had one for my Nexus 6P I really liked and this feels equally good.
This thing is indeed incredibly slippery. I think I'm just going to be extra careful about where I put it down (it's not too slippery in my hands I find, just on certain surfaces), I hate hiding the slick design of the phone with a case. This is also the first phone I've had in a very long time where the camera doesn't bulge out the back, which I really appreciate and don't want to diminish with a case.
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
Well there are a number of skins now at the varies skin sites though I personally skipped them and simply put the phone into an Otterbox Defender case.
I used a cheap curved glass screen protector ( was like $9) and some loca glue (like $10) to make a DIY full adhesive whitestone kit.
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
stamos*bp said:
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
Click to expand...
Click to collapse
I have not had that issue and I am using a Supershieldz screen protector however my brother who is using an Iphone 7 recently had that issue with one due to a screen protector he picked up at Walmart though it resolved once he removed it.
It's amazing to watch this phone slowly creep off of my wireless charger, which has a rubbery grippy surface! My case arrives today...
I'm using slickwraps for the back of my phone and I like it. I would say they are slightly less precise than dbrand, but still great quality. If people would like photos, please let me know.
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Huge Thanks!
Weston
You may want to think about giving the Skinomi Full Body Skin a try. It definitely keeps my phone from slipping off of surfaces, giving the phone a bit of a plastic-rubber feel while still letting the beauty of the phone show through. The back protector doesn't interfere with any cases and offers a bit of mental relief for those times you want to carry your phone without a case.
Dude, I had my g8 for 2 days. Was in. The washroom and the phone was on a roll of toilet paper (the flat side, obviously haha) and got a notification. Before I knew it the phone slid off and landed on the bottom right corner, heard an alarming "tink" sound but didn't think anything of it. A few mins later I saw a small crack, then I looked again and realized that there were multiple cracks on the screen. Ended up getting it replaced by my carrier, I said it was damaged in shipping. Point is that this phone is a glass cannon: it's very powerful for specs but it will have a broken screen if you sneeze on it the wrong way. This is one of the massive downsides to the new gorilla glass. Sure it's scratch resistant but with the wrong amount of pressure it will get destroyed :/
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
I've dropped this thing so many times because it's so slippery. Seems like every other week I hear it jump off a table a few minutes after I leave the room.
I have a crack on 3 corners, but nothing across the screen. My case (which I tend to take off when connecting it to things such as controllers or some USB cables) almost hides the cracks.
However, these are more like small missing chunks of glass on the corners. I've never had such a fragile phone. I tried super glue on the corners to keep it from spreading, but eventually just went to town on the corners with silicone conformal coating that I had sitting around. It seems to be working great and keeps the little shards coated and sort of glued in there. I kind of prefer this to replacing the screen as replacements have only gone down slightly to around $150 shipped from China and I know I'll just end up breaking that one.
There's always been one or two deal breakers with all of my LG phones and that's why I kept going to a different manufacturer as soon as I could. I hate to say it but after this, I'm never going back to LG again no matter what cool unique feature they're wooing me with.
I basically used this phone with a broken screen for 5 months. Replacements are still $150 (better than $200 back when it broke). It dropped approximately 1.5ft face down onto a clay tile floor and front screen has cracks all over. It almost looks somewhat inverted now as if the screen was designed to have tension. Well I went and got a note 10+ and man it is great to have a real phone again. Doesn't have some of the edgy LG stuff that I really loved and theres no headphone jack... but bigger/brighter screen that isn't broken is so nice to have. Good luck with your screens guys.... I'll replace mine when the price is reasonable and either go back to using it or put it on ebay.
Jaa-Yoo said:
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Click to expand...
Click to collapse
I have reached the same conclusion about the screen not being flat enough to utilize a hard glass protector even if you avoid the very curved edge portions. I tried the curved, glued only on the edge types first but that always had a weird optical effect and wasn't very ruggedly glued on, none in the middle. Why? I haven't tried using whitestone glue yet.
So the suggested one sounds interesting. https://www.amazon.com/Ringke-Compa...dge-Application/dp/B07NHMBNLH#customerReviews
I think I'll watch the videos first.
I also found these but yes a firm, solid piece of glass is a no go IMHO. Not a fan of these new case designs for all the new phones. Why de do dat?
https://www.amazon.com/dp/B07QQD2BCG/ref=cm_sw_r_cp_apa_i_MkrHDb48GTKZN
https://www.amazon.com/gp/product/B07QB9MN28/
Still hoping for a solution. I had great luck with Spigen Crystal screen protector SGP10855 for my LG G3 which is hard but I believe would be flexible enough if it skipped the curved edges but they don't make anything like that?
UPDATE: After watching the LG G8 video on YouTube I decided to go with the Rinke.
I'll report back. This will be 4th type attempted.
I put it on this morning. It is pretty easy to get this on with good alignment and no bubbles.
Two things.
1. If you watch the YouTube instructions the place where the dust dust cleaning sticky backing splits in half does leave a slightly perceptable crease in the soft protector. Maybe it will smooth out with time? It did not with the squeegee.
2. It's soft so you can possibly nick with your fingernails and it's also easy to lift an edge ever so slightly during final finishing so be careful.
I see no installation flaws but it also isn't a hard glass but then those do not install properly even when undersized because the screen is not level as you get near the edges as far as 1/4" away. The film eliminates this issue but will it protect and stay on.
We shall see.
I sell a lot of these devices and it is even hard to photograph them on a smooth surface because they will start around on my table. Put it in a case, the screens are expensive.