So, I flashed the supposed fix to get WiFi N without reading the entire thread...
http://forum.xda-developers.com/showthread.php?t=707218
After doing so, my WiFi just says "Error" when I try to turn it on. I then flashed the supposed fix on the last page of said thread, but nothing changed, I still get the error.
Can anyone help me or advise me on what I need to do in order to fix this? I'm running 2.2 with the latest OTA and rooted. I've tried wiping everything also.
Thanks. Also, thanks to the mod who responded to my reporting of that thread and locked it.
I need help I am on CM 10.2 and my signal is low since I flashed the ROM and WiFi doesn't connect at all and data works but soon as i go to the play store it says no connection. In have tried different ROMs and I have the same problem. Carbonrom I can access play store but if I try and install anything it says error. I am thinking its the modem I'm using madmacks modem on cm 10.2. Any help be much appreciated. I am afraid I will need to go back to stock and I'm not if that's going to help....
Update... Really now its just WiFi not connecting. Is there any way to just flash some type of WiFi driver? Or does anyone know of a WiFi fix?
Info Phone :
Galaxy note 2 n7100
Rom Ditto N3 4.4.2 RC2
Hi guys , i used Galaxy S5 Ultra Power Saving Mode, and got problem with wifi after restoring it in normal mode. And so my wifi network is not working anymore. Someone got this problem too, how i can fix the wifi?
I tried to reinstalling 4.4.2 rc dn3, but doing so nothing changed and still my wifi dont work, guys plz help me .
The icon of wifi dont show anymore, and it does not detect wifi networks. So the wifi si really death!
Solution that i tried to fix the wifi, but didnt work :
_Update
i now tried to back on 4.3 dn3 and still wifi dont work even in this release, i have same problem , so my wifi is really Death now :/, i really need help here to restore my wifi !!
_Update 2
As a suggestion i tried to flash both Dr.Ketan's Wifi patch and BL_MJ5_DN3 bootloader with odin, but nothing change. Still my wifi is death.
Normally when u put wifi on this show you the icon of wifi and try to scan a wifi spot. But instead in my situation even if i switch on wifi the icon dont show up and dont even try to scan the wifi. There are really a huge problem here...
_Update 3
As a suggestion i tried to change modem too, with the hurricane modem tool, and nothing changed... i tried all the list modem that are in the hurricane tool, but nothing. So i dunno what to do now, maybe i try to restore and old backup image of my stock rom, and see if it work... hope so.
Btw i tried to digit this code on my phone *#0011# and WIFI and its show me this http://imgbox.com/rWcLRuJd, hope this can help someone to resolve my problem...
_Update 4
Ok i tried to install s5mod v1.3 , and switching on ultra power saving mode and turning back and reboot, after still nothing change! Im really in crisis now, guys i need your help to fixing my wifi help me plz
So this is my first post ever, as I usually learn everything I need to know from reading and searching this is one I can't seem to find
The problem is Im running the super g2 zvc rom I am trying to usethe native hotspot as it says it works after the flash it worked great for netflix i rebooted the device and now it shows my ps3 connected but wont give me any internet connection, anyone know a fix for this?
Turn Hotspot on then update PRL. May have to do this every time
Sent from my LG-LS980 using XDA Free mobile app
beezar said:
Turn Hotspot on then update PRL. May have to do this every time
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Worked like a charm thanks a lot!!!!!
Same issue with hotspot using super g2 rom.
I tried updating PRL but my data still goes on and OFF. Is there another hotspot mod I can use with this rom? Any help would be appreciated.
As a bump to this thread, and to keep the forums tidy, I, too, am having issues with SuperG2
I flashed it and it worked beautifully but I was unable to get any data service. I tried updating PRL/Profile but that would not work. Kept giving me a network error.
That being said, I finally got data to work (beyond me, not sure how this happened but I did NOT get PRL/Profile to update) and was using it merrily until I began to restore some files I had backed up via Titanium.
I rebooted to get the data from these files to run smoothly but after a reboot I lost all connection. It told me that my service was disabled.
I reflashed the ROM but am back to square one - unable to updated my PRL/Profile and cannot get any data, even tho the LTE logo is at the top and spinning. WiFi tethering works and I can access the internet in this way, but not in any other way.
I am being forced to go back to stock =(
Any help would be appreciated.
XenoCyanide said:
As a bump to this thread, and to keep the forums tidy, I, too, am having issues with SuperG2
I flashed it and it worked beautifully but I was unable to get any data service. I tried updating PRL/Profile but that would not work. Kept giving me a network error.
That being said, I finally got data to work (beyond me, not sure how this happened but I did NOT get PRL/Profile to update) and was using it merrily until I began to restore some files I had backed up via Titanium.
I rebooted to get the data from these files to run smoothly but after a reboot I lost all connection. It told me that my service was disabled.
I reflashed the ROM but am back to square one - unable to updated my PRL/Profile and cannot get any data, even tho the LTE logo is at the top and spinning. WiFi tethering works and I can access the internet in this way, but not in any other way.
I am being forced to go back to stock =(
Any help would be appreciated.
Click to expand...
Click to collapse
Connect to wifi then update the profile and prl (can be done at home if you have wifi, or mcdonalds, or starbuck, or anywhere that has open wifi)
Similar Issue
Running SuperG2, comming from Milestone1. I cannot seem to get the WiFi tether to work on SuperG2. It worked great on Milestone1. I tried the update PRL while Wifi tether is active but to no avail. I'm not sure if it's related but my signal kinda sucks too. Where I normally get 4g now I only get 3g with sparatic 4g and I also loose my signal altogether at times. I have to activate airplane mode and then deactivate it to get my signal back. I would go back to Milestone1 but SuperG2 is the frontline. Need to keep moving forward. Any help is appreciated. Thanks.
[SIZE="4"I used the CF-Auto-Root and have been running C-Rom with the lean kernel for about a month or so. Originally after rooting back in January I used Cyanogen Rom Snapshot M5. Anyway ever since I rooted my phone I tripped the knox counter and it still pops up SELinux Reinforcing every time I reboot or turn on my note 3. I there a way to fix and reset this as I am not running stock Samsung Firmware so I have not tried triangle root yet. Also, I have not been able to use my NFC or connect to my WiFi at home although when I go to other places that have WiFi I can connect just fine. I was wondering if anyone else is having the same issue's I have read a lot of threads and still can't find a solution. If I need to unroot then re-root using another method. I tried the NFC fix and it said successful when I ran it through my recovery but it didn't do anything. I also tried to fix the app2sd card and have not been able to do so either. I was wondering if someone can help me out or point me in the right direction. Thanks![/SIZE]
NFC FIX
Please help I tried the NFC Fix that was recommended and it messed up my phone bad. It was for the Canadian Version and now I have to do a restore, but if someone could please tell me how to fix the NFC problem with the CF-Auto-Root and if there is a way to fix the unstable WiFi too that would be great thanks