Hey guys,
ONLY FLASH ON P1000 devices!!!
The official CM11 nightly builds are up and running. Get the official CM11 latest nightly here: http://get.cm/get/cFj
It has the latest commits and the recovery at boot works fine. Art is working fine, but you need to repartition your tab first.
1. Flash the ZIP from recovery as usual. Upgrade from previous CM versions is automatic.
2. Reboot into system. Setup the device and reboot back into recovery.
3. Flash the gapps found here: Banks GApps or official CM11 GApps (some users seem to encounter FCs with official GApps)
4. Reboot into system.
5. Profit???
Thanks to all of the CyanogenMod team, our official device maintainer (cdesai) and terenceng for his awesome work on the P1000 CM11 builds.
Cheers,
C.
Thanks cheatman!
Awsome...
Sent from my GT-P1000 using xda app-developers app
Welcome to the KitKat builders' party
Just make sure to flash gapps before switching to ART mode. Flashing them after the switch generates FCs in all gapps (at least for me).
Cheers,
C.
EDIT - actually I didn't have enough cache MB hence even the small little 17MB gapps failed on ART. Minimum cache needed is 256MB or more would be better. See update post http://forum.xda-developers.com/showpost.php?p=48429528&postcount=370
Thanks cheatman, before today's release I was on 6th_Dec_release, no wonder my gapps couldn't work after ART!!!! Thanks again. on 6th_Dec_version whatsapp, titanium wouldn't install after ART. Anyway old news now, hope this post helps some others too.
cheatman said:
Just make sure to flash gapps before switching to ART mode. Flashing them after the switch generates FCs in all gapps (at least for me).
Cheers,
C.
Click to expand...
Click to collapse
been using the nightly from 8th December, everything good so far, no bugs. I am yet to test data, as I currently don't have a SIM for this tab. It's my daily driver for now. Thanks to terenceng and storm for being faster than the CM team, and to cdesai for maintaining the nightlys
Video recording is not working for me.
hi, I've successfully upgraded to 4.4 with no problems (without gapps) and running dalvik, however the moment I install gapps downloaded from the link above via recovery, there are plenty of FC errors popping up regarding gapps. any chance the gapps are faulty?
klcow said:
hi, I've successfully upgraded to 4.4 with no problems (without gapps) and running dalvik, however the moment I install gapps downloaded from the link above via recovery, there are plenty of FC errors popping up regarding gapps. any chance the gapps are faulty?
Click to expand...
Click to collapse
Don't know if they are faulty, as i haven't tested them, but if they are recommended in the first post, the problem probably isn't in the gapps. Anyways, i've been using banks gapps and haven't had any major problems, and they are working smoothly in CM 11 nightlys
nhecas said:
Don't know if they are faulty, as i haven't tested them, but if they are recommended in the first post, the problem probably isn't in the gapps. Anyways, i've been using banks gapps and haven't had any major problems, and they are working smoothly in CM 11 nightlys
Click to expand...
Click to collapse
alright then, back to the wipe and reset to see if it fixes things. :\
Thanks for letting me know. I updated the OP to reflect your feedback. I've not had any issues with the official GApps and I'm using ART.
Maybe that's a factor? I'll keep testing.
Cheers,
C.
cheatman said:
Thanks for letting me know. I updated the OP to reflect your feedback. I've not had any issues with the official GApps and I'm using ART.
Maybe that's a factor? I'll keep testing.
Cheers,
C.
Click to expand...
Click to collapse
Don't think these are "official". There are still no gapps for CM 11/4.4 in goo.im
Check your sources! The official CM11 GApps can be found here: http://wiki.cyanogenmod.org/w/Gapps
The linked version is the one with ART working and hangouts buggy. Also, if you check out my post-to-thanks ratio, you'll know I'm not BS-ing you
Cheers,
C.
will try this out!
maybe we can get some screenshots at 1st page? ^^
i noticed i have 98Mb of cache partition, and i have fast charge, apparently fast charge bars me from using adb commands, it doesnt recognise that tab in command prompt (adb), although debuging mode is on, how can i disable fast charge?
DroidTalk said:
i noticed i have 98Mb of cache partition, and i have fast charge, apparently fast charge bars me from using adb commands, it doesnt recognise that tab in command prompt (adb), although debuging mode is on, how can i disable fast charge?
Click to expand...
Click to collapse
i think you have my kernel(of course with humberos commits). If you have a rom with sgt7 features, then go to System settings, more..(below device), advanced, usb and set fast charge to off... Or it's a MIUI rom?
storm31 said:
i think you have my kernel. If you have a rom with sgt7 features, then go to System settings, more..(below device), advanced, usb and set fast charge to off... Or it's a MIUI rom?
Click to expand...
Click to collapse
i have CM10 nightly on my device, and i've replaced the original kernel with humberto's kernel. i have the advanced option under Device, but there's no USB tab there. i have Buttons,Radio,TV,WiFi,Viberation
Can't find fast charge toggle
there's no sys/kernel/fast_charge either. dont know what to do.
DroidTalk said:
i have CM10 nightly on my device, and i've replaced the original kernel with humberto's kernel. i have the advanced option under Device, but there's no USB tab there. i have Buttons,Radio,TV,WiFi,Viberation
Can't find fast charge toggle
Click to expand...
Click to collapse
then flash my rom above, disable fast charge (my rom has this setting) and select other rom if you want...
Video recording is not working
please fix this
Related
This build of CM10 will only keep up with what is actually merged into the code for CM10. Primarily this was made because of how infrequent the building goes with the official nightlies, but now i continue on regardless of anything...
Code:
We are not responsible if you brick your phone, for any bugs in the rom,
or if your cat decides to eat your phone because its now full of awesome.
This build is very much identical with the official build, u can switch from official and my build without any fear of having to wipe your phone.. the only difference is that i have the build script change the cyanogenmod version to more reflect like a nightly
I'll start build in the evenings, probably take a little bit depending on how much is new and the real wait is me actually uploading it.. (I have terrible upload speeds!)
Known Issues:
None
Instructions:
Download rom
Go to recovery
Wipe rom if coming from another rom, u dont have to wipe if ur coming from official nightly
Flash rom
Flash gapps, this u dont have to do every time just when u first come to the rom (the rom backs up gapps)
Boot into rom
???
Profit!
Current and older builds can be found here: http://code.google.com/p/team-keyblade/downloads/list
Latest GAPPS: official gapps
Aternate gapps that will sync gallery to picasa if you need this, but you will lose some CM features in camera and other apps. First gapps link is recommended by Cyanogenmod and kalimichoaz(official Maguro cm dev): alternate gapps
To all people saying thanks: Your welcome!! =^_^=
Reserved just in case...
First......
Two...I respect your work.
aish_varya said:
First......
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh::laugh::laugh::silly:
sorry, but you just said you are responsable for our devices? in the case we brick it..... correct the op.
What's the difference with other nightlies?
Madflapjack said:
sorry, but you just said you are responsable for our devices? in the case we brick it..... correct the op.
Click to expand...
Click to collapse
Fixed...Sorry for the typo. I appreciate you pointing out the error of my ways. I love how peacefully and kindly you did it too.
He4dShOt said:
What's the difference with other nightlies?
Click to expand...
Click to collapse
All this is, is stock CM10. No additions, no themes and no additional tweaks. We build this because before there are nightlies, the builds are few and far between. We will build on a daily basis so whatever is merged into the CM code will be in our Rom. It is interchangeable with the "Official" CM10 Rom and can be flashed with just a cache and dalvick cache wipe if coming from the "Official" CM team build.
Please let me know if you have any problems with Google + and Google Talk Force Closing. I just found out that I am having this problem and am trying a full wipe with the latest GAPPS. If you are having this problem we will find a different GAPPS that will work.
Camera not working... First it freezes asking if I want to close it. Then a FC. Talk keeps dying as well ...
Sent from my Galaxy Nexus using Tapatalk 2
Skype also fails to log in. Keeps saying it force closed and asking me if I want to try again.
Sent from my Galaxy Nexus using Tapatalk 2
GPS is not working. Talk force closing. G+ seems ok
I'm having the same problems guys and gals. I'll try to have a working build tmrw. Everything works great but those few things.
Sent from my Nexus 7 using xda premium
New build at link in OP. GPS, gtalk, G+ and camera all working now. Please let me know if you find anymore bugs. I have tested themes, camera, gtalk, phone, messaging and gps. It should work great!
Today's build is up. Use link in OP. There's been a lot of work since yesterday's build. Sorry for the lack of a changelog, but you can check the commits here: http://review.cyanogenmod.com/#/q/status:merged,n,z
So if I install this I won't have to wipe all my apps and settings to upgrade when the official cm10 is released? That's my biggest concern... I hate having to redo all my settings! I don't know how so many people are okay with switching roms so much when you have to do that. Gets very tiresome...
I just want to run something I can stick with that continues to get updates without me having to worry about doing another full wipe in the future
Sent from my Galaxy Nexus using xda app-developers app
colonelcack said:
So if I install this I won't have to wipe all my apps and settings to upgrade when the official cm10 is released? That's my biggest concern... I hate having to redo all my settings! I don't know how so many people are okay with switching roms so much when you have to do that. Gets very tiresome...
I just want to run something I can stick with that continues to get updates without me having to worry about doing another full wipe in the future
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
yep! that's one of the reasons we do pure cm10 builds.. no wiping!
Sent from my Galaxy Nexus using Tapatalk 2
Changelog
8/7/12
Trebuchet: AppWidgetResizeFrame: Allow resizing to any size
Trebuchet: Preferences: Auto-rotate screen
Trebuchet: CM Preferences Category
Trebuchet: Preferences: Grid Size
kernel: offline charging fix
I use rafael salas version of cm10,but his rom does not contain trebuchet launcher,could you please share trebuchet launcher?
Thanks in advance.
Sent from my Galaxy Nexus using Tapatalk 2
Is this ROM still active? I just started using it on my sprint nexus but there doesn't seem to be much activity here.
Hi Guys,
As you have requested, please find below the build of OmniRom for Nexus S 4G.
What works :-
Almost Everything.
What Doesn't work :-
1. WiMax.
2. You tell me.
Needs Testing :-
1. Torch ( Need to wait for around a min or so for it to start turning on the torch, need to look further into this issue. )
The Usual Warnings, and cautionary lines..
Sincere thanks to :-
1. OmniRom Team
2. Codeworkx
3. Google
4. Linus
Use the latest CWM, or TWRP from my other thread.
Build 12:-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQENExEZnRVUThTRVU/edit?usp=sharing
Changelog :- Repo Synced - Android 4.4.4. Partially working torch.
Build 11:-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEWWFfQnVaSUhXaTg/edit?usp=sharing
Changelog :- Repo Synced - Android 4.4.3.
Build 10:-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEQXVZemoyOTdpUHc/edit?usp=sharing
Changelog :- Repo Synced.
Build 9 :-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEbXRESlhYbDNtUUk/edit?usp=sharing
Changelog :- Repo Synced.
Build 8 :-
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEb0RCdDJHZjUxcmM/edit?usp=sharing
Changelog :- Repo Synced.
Build 7 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEbnhya2NZUFJEUlE/edit?usp=sharing
Changelog :- Repo Synced. Included some jit preference as per google's low ram device settings. Try and see, if you don't like the outcome, delete it from build.prop.
Build 6 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEYmJIZ0xDQWcxLWs/edit?usp=sharing
Changelog :- Repo Synced.
Build 5 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEX3Q2ZzVPZG9XMlk/edit?usp=sharing
Changelog :- Repo Synced, zRam On. Incase of issues with flashing kernel, flashboot boot image.
Build 4 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEa3lGR2lVQmVvR2M/edit?usp=sharing
Changelog :- Repo Synced.
Build 3 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEbUxudG5YczA0SDQ/edit?usp=sharing
Changelog :- Repo Synced.
Build 2 :
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEN1oycDFBLVQ4dVk/edit?usp=sharing
Change log :- Latest omni commits; transparent status bar.
Build 1
Download :- https://drive.google.com/file/d/0B9X29cIkNoQEUHRpcXdTbnlKM3c/edit?usp=sharing
Change log :- 1st Build. Repo synced.
Gapps (4.4 ) :- http://forum.xda-developers.com/showthread.php?t=2012857
Do let me know if there are any problems with the build. Been using the same build for some time.
Hit Thanks !
GApps 4.4 link is broken, can you please fix that
Can we use this GApps
(parandroid's gapps-full for 4.4.2 on Crespo 4G)
amitabhr said:
GApps 4.4 link is broken, can you please fix that
Can we use this GApps
(parandroid's gapps-full for 4.4.2 on Crespo 4G)
Click to expand...
Click to collapse
Sorry, Fixed.
Regarding PA Gapps, did'nt try, go ahead and test it !
PA gapps are what I use and they flashed fine for me.
Sent from my Nexus S 4G using xda app-developers app
I got everything running and all is well but I get this error message when trying to use the default launcher.
Sent from my Nexus S 4G using xda app-developers app
Looks like Google now isn't activated..
Sent from my Nexus S using XDA Premium 4 mobile app
Thanks for the reply. I have Google now running but if I click the launcher icon it gives me that error. Not sure if there is a setting I'm missing....
Sent from my Nexus S 4G using xda app-developers app
danger_doom said:
Thanks for the reply. I have Google now running but if I click the launcher icon it gives me that error. Not sure if there is a setting I'm missing....
Sent from my Nexus S 4G using xda app-developers app
Click to expand...
Click to collapse
It might be due to the Google Experience Launcher. My experience of installing PA ( which replaces Stock Launcher ) stuck at black screen with Notification bar working. It seems GEL has a problem with our device though am not sure if thats the same problem you are facing.
Hence, i shifted towards Banks GAPPS or PA which does not replace Stock Launcher.
Thank you for bringing OmniRom to the NS4G!
Sorry if I'm bothering you with this. I get the same error prompts in your omnirom too. I did a clean install (using Philz Touch Advanced CWM). I think it's a setting that is specific to these 4.4 roms vs the 4.3 ones. When I run the 4.3 roms from Slim roms or Hellycat, I don't get these errors prompts.
ERROR PROMPTS: "Unfortunately, the process com.android.phone has stopped."
ABOUT MY PHONE:
- no data plan.
- wifi-only device.
I PM'd you the logcat from this new omni build. I did an ADB logcat from bootup again. Please copy my logcats to your notepad or something. I will delete them off my dropbox by tomorrow, since I assume you do not need me to keep these files and links. I hope these logcats will help you with your builds. Thanks again for the time and effort you spend on these roms!
playdoc said:
Thank you for bringing OmniRom to the NS4G!
Sorry if I'm bothering you with this. I get the same error prompts in your omnirom too. I did a clean install (using Philz Touch Advanced CWM). I think it's a setting that is specific to these 4.4 roms vs the 4.3 ones. When I run the 4.3 roms from Slim roms or Hellycat, I don't get these errors prompts.
ERROR PROMPTS: "Unfortunately, the process com.android.phone has stopped."
ABOUT MY PHONE:
- no data plan.
- wifi-only device.
I PM'd you the logcat from this new omni build. I did an ADB logcat from bootup again. Please copy my logcats to your notepad or something. I will delete them off my dropbox by tomorrow, since I assume you do not need me to keep these files and links. I hope these logcats will help you with your builds. Thanks again for the time and effort you spend on these roms!
Click to expand...
Click to collapse
Hmm, interesting.. do you have at least Mobile Network. Nevertheless, if you are using it as wifi only,
Add the same in build.prop.
ro.carrier=wifi-only
And disable the following lines for good measure.
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=4
Send me the logcat after you try this.
adityaxavier said:
Hmm, interesting.. do you have at least Mobile Network. Nevertheless, if you are using it as wifi only,
Add the same in build.prop.
ro.carrier=wifi-only
And disable the following lines for good measure.
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=4
Send me the logcat after you try this.
Click to expand...
Click to collapse
Thank you! This works on this OmniRom build! No more error prompts!
Oddest thing about flashing this Rom though. I was able to successfully flash this OmniRom, after I first flashed your CM11 AOSP one (from this thread). I did a "clean to install a new rom" option in Philz Touch Recovery, of course. However, if I tried to install OmniRom after previously having Helly Rom, or even factory original (with root), I get stuck on the boot screen animation. I was able to recreate each of these scenarios at least twice. I'm probably making a newbie mistake somewhere. Thanks again for all your hard work with these Roms!
playdoc said:
Thank you! This works on this OmniRom build! No more error prompts!
Oddest thing about flashing this Rom though. I was able to successfully flash this OmniRom, after I first flashed your CM11 AOSP one. I did a "clean to install a new rom" option in Philz Touch Recovery of course. However, if I tried to install OmniRom after previously having Hellycat, or even factory original (with root), I get stuck on the boot screen animation. I was able to recreate each of these scenarios at least twice. I'm probably making a newbie mistake somewhere. Thanks again for all your hard work with these Roms!
Click to expand...
Click to collapse
Same EXACT situation here. I tried the Philz Recovery, different gapps, tried going from Hellybean etc but I can't get Omni past the boot screen. I will keep trying though. I REALLY want to get this past boot screen
Edit ....my NS4G is still fully active too so I can test everything. If someone can please post a link for the gapps that worked for you that would be great...unless the ones in OP are what those of you that have it running used. I tried the P.A full stock 4.4.2 and ones in OP but this was around 20 min after this thread went up. Thanks!
Sent from my HTC One using Xparent Gray Tapatalk 2
I'm a real minimalist with the GApps. I only installed Banks' GApps 4.4.2 Core, and just install a few other Google apps (i.e., Gmail) via Playstore.
I also install from zip, at recovery, the SuperSU update v1.86 (see: SuperSU thread), because I find I get errors with the baked-in Superuser in some Roms.
Another problem I have while using this OmniRom, is that this launcher keeps losing some (3 or 4) of the apps I put on the desktop/homescreens. It's repeatedly the same apps. (EDIT: Fixed with flashing the Rom again, after a clean install.)
JohnCorleone said:
Same EXACT situation here. I tried the Philz Recovery, different gapps, tried going from Hellybean etc but I can't get Omni past the boot screen. I will keep trying though. I REALLY want to get this past boot screen
Edit ....my NS4G is still fully active too so I can test everything. If someone can please post a link for the gapps that worked for you that would be great...unless the ones in OP are what those of you that have it running used. I tried the P.A full stock 4.4.2 and ones in OP but this was around 20 min after this thread went up. Thanks!
Sent from my HTC One using Xparent Gray Tapatalk 2
Click to expand...
Click to collapse
Try flashing pa modular full, that's the one am using. And format system partition before you flash omnirom.
playdoc said:
I'm a real minimalist with the GApps. I only installed Banks' GApps 4.4.2 Core, and just install a few other apps via Playstore.
I also install from zip, at recover, the SuperSU update v1.86, because I find I get errors with the baked-in Superuser in some Roms.
Another problem I have while using this OmniRom, is that this launcher keeps losing some (3 or 4) of the apps I put on the desktop/homescreens. It's repeatedly the same apps.
Click to expand...
Click to collapse
KitKat has the weird habit of automatically changing home screen pages on installation of new app instead of using the current one. If that's not it then can help you cause it never happened to me.
I was stuck on boot animation, after using Philz Touch (Advanced CWM Touch 6.0.4.5), and using "clean to install new Rom", sometimes combined with "clean cache, clean dalvik" for good measure. So, for experimentation purposes, I then used the CWM 6.0.4.3 Non-Touch, from Rom Manager app installation, then flashed this OmniRom again. After a long boot animation of the "Omni" symbol, the Rom successfully went to the homescreen.
EDIT: Unfortunately, same bootloops happen with NonTouch CWM 6.0.4.3. Again, the only time I got past boot animation is if I first flashed adityxavier's CM11 Unoffical 4.4.2 AOSP rom, then clean data/factory reset, clean cache, clean dalvik, then flashed OmniRom (wait for it, the boot animation takes a while).
To DEV:
- launcher losing my apps --> fixed with re-flashing of the Rom.
New issues:
(1) I have been getting distorted graphic rendering at times. It especially happens with some SuperSU prompts, and also some of the times I go to the Settings > Performance section. I'll try to logcat for you next time this happens, to catch these graphic rendering issues (assuming logcat will log these too).
(2) Issues with stock android email app, and Gmail app, not updating with any new email notifications, nor any new emails, using Banks' GApps (EDIT: Fixed with the 4th or 5th reinstall of the Rom.)
Could someone tell me how to add widgets to the lockscreen?
Sent from my Nexus S 4G using XDA Premium 4 mobile app
jcruz767 said:
Could someone tell me how to add widgets to the lockscreen?
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Press your "menu" hardkey, or longpress an empty space on the homescreen, there should be a "widgets" option from there, to add widgets to the homescreen.
EDIT: No Lockscreen widget option, that I know of, yet. Will post again if I find it.
I tried it on the lock screen and nothing came up
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Finally got this to boot up, but WiFi doesn't seem to scan any networks. Any ideas?
Sent from my Nexus S 4G using XDA Premium 4 mobile app
Hello! I'll be posting pure AOSP builds whenever there are new versions of android released (providing I have the time).
If you choose to use these builds, please ensure you have unlocked your bootloader and have custom recovery installed. I have also noticed that TWRP seems a little wonky at this point, so in order for me to flash it correctly, I had to wipe, then restart recovery, then flash. Hope that's not the case for everyone else.
3/18/15
Added ability to change DPI.
3/15/15
No longer messes with recovery at all. Bluetooth working, data does not force encrypt.
3/13/15
Android 5.1.0_r1 (LMY47D)
This release will wipe your recovery. If anyone needs this changed let me know and I will build another.
1/3/2015
Android 5.0.2_r1 (LRX22G)
Data is now encryptable, meaning your unencrypted data should stick going forward.
Included my own build of stock kernel with Linaro 4.9.3 toolchain.
Fixed bluetooth (thanks Lollipopalooza/Craig)
No longer need to re-flash recovery.
12/6/2014
Android 5.0.1_r1 (LRX22C)
You will need to install separate gapps
You will need to re-flash your custom recovery after you install (you all let me know if I should change this or not, I think I will on future builds)
I am not responsible for anything that happens to your device or to you, yourself while flashing this.
Latest DL Links will be in post #2.
XDA:DevDB Information
Pure AOSP Flounder, ROM for the Nexus 9
Contributors
gchild320
ROM OS Version: 5.0.x Lollipop
Based On: AOSP
Version Information
Status: Stable
Created 2014-12-06
Last Updated 2015-01-03
Downloads
3/18/15
https://www.androidfilehost.com/?fid=95916177934543409
3/15/15
https://www.androidfilehost.com/?fid=95916177934541983
3/13/15
5.1 - https://www.androidfilehost.com/?fid=95916177934540786
1/3/14
Flounder Android 5.0.2_r1 build LRX22G https://www.androidfilehost.com/?fid=95864024717074545
Future FAQ if necessary (let's hope not).
Thank you!!!!
Will test it tomorow
I hope cm12 will build on arm64 soon
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
mpmilestogo said:
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
Click to expand...
Click to collapse
I didn't realize that there were two versions of twrp...I used the one from twrp website.
gchild320 said:
I didn't realize that there were two versions of twrp...I used the one from twrp website.
Click to expand...
Click to collapse
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
USBhost said:
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
Click to expand...
Click to collapse
Hell yes checking this out tomorrow.
build
Awesome !!!! Been waiting for this. How did u build? Last week since their are little options for roms decided to build one on my own and i did a repo sync to Google source but when i did lunch flounder wasn't listed in the build options ?
Flounder still isn't listed just lunch it anyway
Made a video running the ROM. Works very well!!
https://www.youtube.com/watch?v=kVQW-PMepn0
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Hiro Nakamura said:
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
Click to expand...
Click to collapse
belair56 said:
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Click to expand...
Click to collapse
Well i don't think it's 64bit version or is it ?
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
From what I understand the apps themselves need to be optimized for 64 internally. These are all Google apps so they are if Google did so. As you update from the play store you don't choose if you're running 64bit or not.
As always I can be wrong.
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
This is actually a great question.
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
omvir said:
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
Click to expand...
Click to collapse
Adaptive brightness is working flawlessly. Maybe you had a bad download or flash.
gchild320 said:
Flounder still isn't listed just lunch it anyway
Click to expand...
Click to collapse
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
jlokos said:
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
Click to expand...
Click to collapse
I manually changed it to work with official twrp... Not sure why twrp is calling it volantis instead of flounder but that's why. Also, to get anything to flash in twrp at the moment, I have to reboot recovery after wiping. Hope this helps.
I'm uploading a build of CyanogenMod 12 for the t0lteatt I've built. This build is still very alpha, so not everything will work as expected, but much of the basic functionality is there and this may be capable of being a daily driver for those who have to live on the bleeding edge. I'm not sure how long I'll work on keeping the build updated, but it looks like I'll be working on it for now. Hope y'all like it.
Known Issues:
Battery life may be shorter than normal (Turning off Adaptive Brightness will greatly help with battery life)
Netflix and other DRM protected apps do not work.
Media sharing services, such as Snapchat, may not work or may have issues.
Twitch may not work.
Bluetooth can be sorta glitchy.
And much, much more (As stated, this build is very alpha, so issues can be expected)
Instructions:
Download ROM here: https://www.androidfilehost.com/?w=files&flid=22696
Download GAPPS here: http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Reboot into recovery
Full wipe: Wipe cache, dalvik, wipe data/factory reset, clean to install a new rom, format system.
Flash ROM downloaded above.
Flash GAPPS downloaded above.
Reboot into system.
Let the system rest for a bit and settle in. (It seems the system can be a bit temperamental if you try to use it too soon... At times.)
If things don't work after letting the ROM settle, you may need to reboot a couple of times for everything to work properly.
Enjoy the lollipop goodness!
I would like to give thanks to the following:
sbrissen, DerTuefel1980 and all other contributors (I know I'm missing a lot, but they're the only ones I can think of right off hand, so I appologize to anyone who deserves mentioning for not mentioning y'all by name, and swear yall have my deepest respect) for their contributions to developing and maintaining the t0lte and related device trees that eventually allowed lollipop to be built for our device.
Ivan_Meler for the original camera fix http://forum.xda-developers.com/galaxy-note-2/orig-development/cyanogenmod-12-alpha-1-n7100-t2949644
mr.nth.na.vn for his work-around to get sbrissen's i605 build to work correctly on t0lte.
Voyebanm for his posts and links which helped me to find the answers I needed.
fkfmfz for his gps fix that I have baked into the ROM and miji2 for cleaning up the fix.
And all the developers, maintainers and contributors of CyanogenMod in their pursuit of advancing and freeing all our android based devices.
If you would like to read more about the development of CyanogenMod, you can find extra information at the following links.
CyanogenMod: http://www.cyanogenmod.org/
CyanogenMod Wiki: http://wiki.cyanogenmod.org/
CyanogenMod Source: https://github.com/CyanogenMod
CyanogenMod Code Review: http://review.cyanogenmod.org/
Other threads on XDA I found useful:
CM12 for T0LTE by Voyebanm: http://forum.xda-developers.com/galaxy-note-2-att/development/cm12-t0lte-t2967836
[Rom] [alpha] [Unofficial] CM12.0, malir3p2 [20141214] by DerTuefel1980: http://forum.xda-developers.com/gal...rom-cyanogenmod-12-0-malir3p2-build1-t2958358
[12/12]{CM12-Unofficial} T0lte-Everything Almost Work+Incall by mr.nth.na.vn: http://forum.xda-developers.com/gal...05/rom-10-12-14-cm12-unofficial-data-t2969067
[ROM][I605]Cyanogenmod 12.0 [12/12/14] by sbrissen: http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
Have a good one!
AzraelsKiss said:
I'm uploading a build of CyanogenMod 12 for the t0lteatt I've built. This build is still very alpha, so not everything will work as expected, but much of the basic functionality is there and this may be capable of being a daily driver for those to have to live on the bleeding edge. I'm not sure if I'll work on keeping the build updated, but it's always a possibility. Hope y'all like it.
Known Issues:
GPS may not work (GPS Test does not see any satellites, but navigation still seems to work, so I don't know)
Battery life may be shorter than normal
Camera issues (see below)
And much, much more (As stated, this build is very alpha, so issues can be expected)
Instructions:
Download ROM here: https://www.androidfilehost.com/?fid=95857557620392172
Download GAPPS here: https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
Reboot into recovery
Full wipe: Wipe cache, dalvik, wipe data/factory reset, clean to install a new rom, format system.
Flash ROM downloaded above.
Flash GAPPS downloaded above.
Reboot into system.
Skip initial setup.
Go to Settings > Language & input > Current Keyboard.
Check on "Hardware".
Setup Wifi, APN, Google account, etc in Settings.
If you have problems with camera (no back camera/Can't connect to camera):
Download Google Camera from the Play Store.
Download Terminal Emulator (Terminal Emulator for Android) from the Play Store.
Open Terminal Emulator
Type: su
Press Enter
Type: sh etc/init.d/80cfw
Camera may now work (Sometimes, the camera may, again, not connect, but should start working again after a reboot)
Enjoy the lollipop goodness!
I would like to give thanks to the following:
sbrissen, DerTuefel1980 and all other contributors (I know I'm missing a lot, but they're the only ones I can think of right off hand, so I appologize to anyone who deserves mentioning for not mentioning y'all by name, and swear yall have my deepest respect) for their contributions to developing and maintaining the t0lte and related device trees that eventually allowed lollipop to be built for our device.
Ivan_Meler for the camera fix http://forum.xda-developers.com/galaxy-note-2/orig-development/cyanogenmod-12-alpha-1-n7100-t2949644
mr.nth.na.vn for his work-around to get sbrissen's i605 build to work correctly on t0lte.
Voyebanm for his posts and links which helped me to find the answers I needed.
And all the developers, maintainers and contributors of CyanogenMod in their pursuit of advancing and freeing all our android based devices.
If you would like to read more about the development of CyanogenMod, you can find extra information at the following links.
CyanogenMod: http://www.cyanogenmod.org/
CyanogenMod Wiki: http://wiki.cyanogenmod.org/
CyanogenMod Source: https://github.com/CyanogenMod
CyanogenMod Code Review: http://review.cyanogenmod.org/
Other threads on XDA I found useful:
CM12 for T0LTE by Voyebanm: http://forum.xda-developers.com/galaxy-note-2-att/development/cm12-t0lte-t2967836
[Rom] [alpha] [Unofficial] CM12.0, malir3p2 [20141214] by DerTuefel1980: http://forum.xda-developers.com/gal...rom-cyanogenmod-12-0-malir3p2-build1-t2958358
[12/12]{CM12-Unofficial} T0lte-Everything Almost Work+Incall by mr.nth.na.vn: http://forum.xda-developers.com/gal...05/rom-10-12-14-cm12-unofficial-data-t2969067
[ROM][I605]Cyanogenmod 12.0 [12/12/14] by sbrissen: http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
Have a good one!
Click to expand...
Click to collapse
Thanks for the hard work! I got navigation but no gps lock but not an issue, camera fix worked for me. The only issue I had was no screen rotation. I flashed a sensor fix and all is good. Here is the link for the sensor fix: https://mega.co.nz/#!1xkSxTDJ!o8DQkNT6UvjNoxfgoxjNq2UnZz_6bO3ivYwMmvRv7dc
I am using this as my daily driver and I am grateful for everyone's time and hard work for giving our phones new life!
Shrek77 said:
Thanks for the hard work! I got navigation but no gps lock but not an issue, camera fix worked for me. The only issue I had was no screen rotation. I flashed a sensor fix and all is good. Here is the link for the sensor fix: https://mega.co.nz/#!1xkSxTDJ!o8DQkNT6UvjNoxfgoxjNq2UnZz_6bO3ivYwMmvRv7dc
I am using this as my daily driver and I am grateful for everyone's time and hard work for giving our phones new life!
Click to expand...
Click to collapse
Thanks for posting the sensor fix. I had forgot all about someone mentioning flashing it to fix proximity sensor issues as well. I don't seem to have the sensor issues myself, so it just slipped my mind. I'm glad ya liked the build. Have a good one!
This is fantastic! Did you port this from the N7100? Was it difficult? Anyone else noticing any major issues?
greddy91 said:
This is fantastic! Did you port this from the N7100? Was it difficult? Anyone else noticing any major issues?
Click to expand...
Click to collapse
This is built from CyanogenMod source with a couple of cherry picks of commits by sbrissen in code review. Many, many other, much more intelligent than me, people worked their arses off to get the t0lte and related device trees brought up for lollipop. All I did was build it with the t0lteatt specific information already coded for CM-11.0. Glad you're enjoying the ROM.
Have a good one!
everything works perfectly
AzraelsKiss said:
I'm uploading a build of CyanogenMod 12 for the t0lteatt I've built. This build is still very alpha, so not everything will work as expected, but much of the basic functionality is there and this may be capable of being a daily driver for those to have to live on the bleeding edge. I'm not sure if I'll work on keeping the build updated, but it's always a possibility. Hope y'all like it.
Known Issues:
GPS may not work (GPS Test does not see any satellites, but navigation still seems to work, so I don't know)
Battery life may be shorter than normal
Camera issues (see below)
And much, much more (As stated, this build is very alpha, so issues can be expected)
Instructions:
Download ROM here: https://www.androidfilehost.com/?fid=95857557620392172
Download GAPPS here: https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
Reboot into recovery
Full wipe: Wipe cache, dalvik, wipe data/factory reset, clean to install a new rom, format system.
Flash ROM downloaded above.
Flash GAPPS downloaded above.
Reboot into system.
Skip initial setup.
Go to Settings > Language & input > Current Keyboard.
Check on "Hardware".
Setup Wifi, APN, Google account, etc in Settings.
If you have problems with camera (no back camera/Can't connect to camera):
Download Google Camera from the Play Store.
Download Terminal Emulator (Terminal Emulator for Android) from the Play Store.
Open Terminal Emulator
Type: su
Press Enter
Type: sh etc/init.d/80cfw
Camera may now work (Sometimes, the camera may, again, not connect, but should start working again after a reboot)
Enjoy the lollipop goodness!
I would like to give thanks to the following:
sbrissen, DerTuefel1980 and all other contributors (I know I'm missing a lot, but they're the only ones I can think of right off hand, so I appologize to anyone who deserves mentioning for not mentioning y'all by name, and swear yall have my deepest respect) for their contributions to developing and maintaining the t0lte and related device trees that eventually allowed lollipop to be built for our device.
Ivan_Meler for the camera fix http://forum.xda-developers.com/galaxy-note-2/orig-development/cyanogenmod-12-alpha-1-n7100-t2949644
mr.nth.na.vn for his work-around to get sbrissen's i605 build to work correctly on t0lte.
Voyebanm for his posts and links which helped me to find the answers I needed.
And all the developers, maintainers and contributors of CyanogenMod in their pursuit of advancing and freeing all our android based devices.
If you would like to read more about the development of CyanogenMod, you can find extra information at the following links.
CyanogenMod: http://www.cyanogenmod.org/
CyanogenMod Wiki: http://wiki.cyanogenmod.org/
CyanogenMod Source: https://github.com/CyanogenMod
CyanogenMod Code Review: http://review.cyanogenmod.org/
Other threads on XDA I found useful:
CM12 for T0LTE by Voyebanm: http://forum.xda-developers.com/galaxy-note-2-att/development/cm12-t0lte-t2967836
[Rom] [alpha] [Unofficial] CM12.0, malir3p2 [20141214] by DerTuefel1980: http://forum.xda-developers.com/gal...rom-cyanogenmod-12-0-malir3p2-build1-t2958358
[12/12]{CM12-Unofficial} T0lte-Everything Almost Work+Incall by mr.nth.na.vn: http://forum.xda-developers.com/gal...05/rom-10-12-14-cm12-unofficial-data-t2969067
[ROM][I605]Cyanogenmod 12.0 [12/12/14] by sbrissen: http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
Have a good one!
Click to expand...
Click to collapse
Everything works perfect , just one little bug ... My contacts from google dont displey when someone calls nor are the showing up in messaging app. Any ideas
And the camrea is working front and back
Tried to get the camera to work sadly I couldn't. Other than that and some graphical glitches on chrome beta(which is probably just not completely ready for lollipop) everything is running great.
I tried to install this an it gets stuck in bootloop.
try ...
mtech5 said:
I tried to install this an it gets stuck in bootloop.
Click to expand...
Click to collapse
Try installing CM 11 First and going through the set up then boot into recovery and install cm12 have fun
Hit thanks if it helped
Joshua Mr PC Repair said:
Try installing CM 11 First and going through the set up then boot into recovery and install cm12 have fun
Hit thanks if it helped
Click to expand...
Click to collapse
What I ended up doing was I was able to boot the rom for the 7105 so I installed it then dirty flashed this one over it. Runs like a charm.
mtech5 said:
What I ended up doing was I was able to boot the rom for the 7105 so I installed it then dirty flashed this one over it. Runs like a charm.
Click to expand...
Click to collapse
Look for the Lolipop shift kernel and install it , it fixes fron and rear camrea
After I did the dirty flash the camera works without doing anything extra.
Got a quick question for you guys. I have flashed this on my note 2 and have an unofficial CM12 I am working on flashed on my Note 4.
I however cannot figure out why Netflix will not work on either build. It is not a lollipop issue, because it works on my tablet, it seems to be an issue on CM12 only.
Would love to know if you guys have a solution, or know what might be missing from the build, so I can bring it back over to the CM12 note 4 thread. Thanks!
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
ShrekOpher said:
Got a quick question for you guys. I have flashed this on my note 2 and have an unofficial CM12 I am working on flashed on my Note 4.
I however cannot figure out why Netflix will not work on either build. It is not a lollipop issue, because it works on my tablet, it seems to be an issue on CM12 only.
Would love to know if you guys have a solution, or know what might be missing from the build, so I can bring it back over to the CM12 note 4 thread. Thanks!
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
Netflix just updated , try it again , i just updated mine and seems to be working ,
Joshua Mr PC Repair said:
Netflix just updated , try it again , i just updated mine and seems to be working ,
Click to expand...
Click to collapse
So this is the error I am getting.
Any ideas
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Everything seems to be working just fine, except for after a few hours it starts rebooting when the screen is turned off. Manually or automatically.
Full charge .. Seems radio is killing my battery
ShrekOpher said:
So this is the error I am getting.
Any ideas
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah other build have the issue .. ROM still work in progress beta
Sent from my GT-N7105 using XDA Free mobile app
I will try this later tonight and see how it is... I just upgraded to the z3. The front speakers were what made me get it... Lol. I will still lurk here once in a while.
Okay... Did a new build... This should fix some soft reboots, the first boot setup keyboard issue, some of the camera issues and maybe a few other issues. https://www.androidfilehost.com/?fid=95863780491132977
There's over 200 downloads for the first build, so it seems a fair few have given it a try. Thank y'all for that. Just keep in mind, this is still an alpha stage ROM, so there will still be issues and errors, but hopefully, they'll be few enough to make it usable. Have a good one!
CyanogenMod 11 with crDroid additions for Xiaomi MiPad
!! IMPORTANT !!
xep.8800.org will be temporarely down from 29.03.15 for couple of weeks so it would be great if somebody do mirror of latest buld and post link here. Thx!
About:
Source built CM except proprietary blobs and binary kernel from stock MIUI rom.
This is not a port from another binary rom.
Click to expand...
Click to collapse
What's working:
It seems everything working for now..
Click to expand...
Click to collapse
Not working/Bugs:
"Wi-Fi region code" setting is broken. Do not touch it or it will break your wi-fi.
you tell me.. testing in progess..
Click to expand...
Click to collapse
Instructions:
1. Install CWM Recovery
2. Do Full Wipe If coming from another ROM
3. Flash ROM
4. Flash Google Apps (my recommendation is to install minipal gapps due to /system partition size limits)
5. Reboot
Click to expand...
Click to collapse
Multirom Instructions:
1. Install TWRP Multirom Recovery
2. Reboot into TWRP and install multirom-20150205-v30-UNOFFICIAL-mocha.zip
3. Click "Advanced->Multirom" and flash your desired second rom.
4. Return to the installed roms listing, click fresh installed rom and click "Remove boot.img" (Due to closed kernel sources kexec-hardboot is not implemented so we need to remove boot.img)
5. Reboot. Select your desired rom from multirom menu
Click to expand...
Click to collapse
Downloads:
cm-11-20150327-UNOFFICIAL-mocha.zip
CWM
Multirom:
TWRP_multirom-v2.8.4-mocha.zip
multirom-20150205-v30-UNOFFICIAL-mocha.zip
I don't know if it is actually compiled with TEGRA optimizations but have created CWM flashable zip with stock bionic libraries. You can flash it on top of CM installation:
tegra_bionic.zip
Changelog:
15.02.15
* apply qcom bionic optimization
* build.prop dalvik etc tweaks
02.02.15
* Reboot to recovery fixed
* Recents view proportion fixed
26.01.15
* Synced with CM repo
* have enabled Display mirroring (miracast) though it does not work with my EZ dongle, sound is ok but screen is black. May be it'll work with another dongles...
21.01.15
* Update to the latest kernel from stock MIUI
20.01.15
* Sleep issue fixed
* Adopt nvcplsvc for CM & implement Performance Profile selection
18.01.15
* Synced up with CM repo.
* Added USB Mass Storage mode for external sd. Though it does not work along with ADB Debug enabled, need to be switched off when using UMS mode.
17.01.15
* Switch to CM's audio_effects and make Dirac plugin work. Equalizer crash fixed.
Click to expand...
Click to collapse
Links:
http://github.com/cyanogenmod
http://github.com/cristianomatos
https://github.com/faust93
Click to expand...
Click to collapse
I take no responsibility for what this may or may not do to your device.
Do not forget to click Donate button! It makes me work harder!
Thanks Pumbaster for your work!
My device doesn't seem to go to sleep...
WakeLockDetector shows Android System --> ConnectivityService as the main issue. BetterBatteryStats shows the same...
I tried turning location services off, froze Mobile Data and Mobile Network Configuration in Titanium Backup but that doesn't help. No checking if the same wakelock appears with wifi off...
Anyone with any clue? Or the same problem?
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Krystanos said:
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Click to expand...
Click to collapse
I used pico gapps myself and the june version is way smaller then the december version, then again I actually did try the december version as well and it seemed to work fine. So not sure, apart from the size...
About TWRP vs CWM, not sure. Guess it also should work with TWRP but haven't tried... CWM is needed for True Dual Boot, but that seems bugged anyway.
By me too. Battery drain is to much, device don't go to sleep...
zolikaDB said:
By me too. Battery drain is to much, device don't go to sleep...
Click to expand...
Click to collapse
Yeah, seems to be a common issue.
My device only goes to sleep when wifi is turned completely off. When I have it set to turn off when display is off I still get the wakelocks. I also have set the scanning for open wifi to off, location services turned off, etc.
For now I flashed back to the 0114 version as that one is working fine here...
If I can share some logs or anything, I'd be more then happy to!
@dagrim1: I hope, Pumbaster make new, fixed build
I Encounter Graphical Glitches with 3rd Party Browsers (Opera and UC Browser)
Chrome works fine so far. Also heavy Battery drain an 17/1
@faust93: what is with battery drain?
Did a very dirty try or replacing frameworks.jar but that didn't work...
Saw some wifiStateTracker errors and that and ConnectivityService seemed to be part of the framework, that's why I gave it a shot. 0118 still has the deespleep/wakelock issue btw...
I don't really care about dual boot. MIUI has so much limits. Once I go to CM, I don't think I'll be able to come back to MIUI...
But I'll stick to CWM, just in case...
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
dagrim1 said:
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
Click to expand...
Click to collapse
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
zolikaDB said:
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
Click to expand...
Click to collapse
I don't believe it's integrated in 0118, think that fixes some sd stuff...
I am currently running the 0118 build (with the wpa_supplicant.bin file replaced manually) and seems to be working pretty fine. Had some video issues with a certain app (video jumping a bit, stuttering) but think I fixed that with 'disable hardware overlay' in developer options.
Without the replaced .bin I also had a problem with turning off and on wifi. It would work when booting, but if I turned it off I couldn't turn it on again... The replaced .bin also fixes that. Now checking if antutu finishes it's run...
@dagrim1: hope, Pumbaster fix this problem!
Just another small question: full wipe will delete the /data partition too right ? So the ROM zip file will be deleted too ? Or am I missing something ?
Thanks.
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
jastonas said:
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
Click to expand...
Click to collapse
Unfortunately I tried to install CWM with fastboot and it failed to install... No specific error message.
I have seen a port of TWRP for MiPad. Have you tried this one, or the standard one?
How I wish I could just flash CM on my MiPad...