[Q] problem with the boot loader - Galaxy Note II Q&A, Help & Troubleshooting

Hey guys .. at first I tried to upgrade my Android from 4.1.2 to 4.3 using odin
And it crached and the phone can't opened and says need to connect to the recovery mode in Kies but it doesn't recognise when I connected it
And when I tried to install the software again and no response ...
Please help me
Thank you

If you can still go into download mode,try using another version of odin.

Related

samsung galaxy s3 will not boot up (soft brick)

hey
my samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
I had the same message on my s2. I just odined stock ROM and was good to go
Sent from my SGH-T999 using Tapatalk 2
5AL3H said:
hey
my samsung galaxy s3 GT-i9300 will not boot up ,only shows the samsung logo
after trying to ROOT my device the problem came in
i tried flashing stock firmware using odin nothing works
and after trying to flash the firmware my samsung has gone even worse it now says " FIRMWARE UPGRADE ENCOUNTERED AN ISSUE PLEASE SELECT RECOVERY MODE IN KIES AND TRY AGAIN
i cannot get into recovery because it do not not work!!
The only thing that works is download mode
HELP ME PLEASE
Click to expand...
Click to collapse
Okay first you're in the wrong forum, so I'm assuming you tried to root with the wrong rooting method because you have a gt-i9300...go check out the international S3's forums and maybe you can find an answer there?

Samsung Galaxy Gio bootloop after flashing stock ROM via Odin

Hello all,
Today I decided to go back to stock ROM via Odin.
I was using Milestone 6 based on new cm9. I did a factory reset via settings.
Then turned off my mobile and went to download mode.
Odin recognized my mobile and started the flashing process.
It showed pass message after 5 mins.
Now my mobile is bootloop. Samsung logo just keeps appearing again and again.
I tried to access recovery but I cant access it.
What am I supposed to do.
Any help would be highly appreciated.
Thank you
Hi
I was have like your problem (the same!!)
So what I do is firstly flash the 2.3.3 via Odin, then I flash again the 2.3.6 via Odin
When I flash 2.3.6 without flash firstly 2.3.3 , it dosent work ... the samsung logo repeat it selfs ...
That's what I do..... if some one haves easy way plz help us?!!!!
Sent from my GT-S5660 using Tapatalk 2
Thanks it worked I am not flashing to 2.3.6 and will stick to 2.3.3
pranjaldixit said:
Thanks it worked I am not flashing to 2.3.6 and will stick to 2.3.3
Click to expand...
Click to collapse
'Well it's fine to stick with your 2.3.3 and if you want to go to 2.3.6 you dont have to use odin, just go to samsung's official padge, search for your phone, install samsung kais and brchause you tawe rhe official android rom for Gio you will be soon notified that a higher wersion of android is awailable, so you can update to the latest version with kais :good:

firmware upgrade encountered an issue. please select recovery mode in kies & try agai

firmware upgrade encountered an issue. please select recovery mode in kies & try agai
Hello friends i just bought my s4 sgh-919 and root then, after i want to install a custom recovery and make this
http://www.tech-recipes.com/rx/4100...w-to-install-a-custom-recovery-twrp-or-oudhs/
but now my s4 can't boot and say: firmware upgrade encountered an issue. please select recovery mode in kies & try again
please help me, how i can repair this, i have one day with my phone and i don't know what to do
:crying::crying:
jotashadow said:
Hello friends i just bought my s4 sgh-919 and root then, after i want to install a custom recovery and make this
http://www.tech-recipes.com/rx/4100...w-to-install-a-custom-recovery-twrp-or-oudhs/
but now my s4 can't boot and say: firmware upgrade encountered an issue. please select recovery mode in kies & try again
please help me, how i can repair this, i have one day with my phone and i don't know what to do
:crying::crying:
Click to expand...
Click to collapse
All else fails, you can always download a stock .tar and revert back to stock. http://forum.xda-developers.com/showthread.php?t=2258628 is a pretty good How-To. Just substitute the OUDHS recovery .tar for whichever one you want to use.
THANKS
Thank you so much to every one finally i can solved my problem with my s4, now root again and put a custom recovery
:laugh::laugh:
I need help. ASAP
ok heres the deal I upgraded to 4.3 via wifi on the phone then i rooted using cf autoroot which was supposedly knox undetectable, it wasnt my knox is now 0x1, and i restored my data,cache, and boot that i had from 4.2.2 and then it went to a black screen when booting with the led functioning. so i flashed to stock using odin and it worked but wifi sound and sd card did not work so i tried to upgrade via kies thinking it would solve my problem, it didnt it crashed at 43% and put me in firmware encountered issue mode so i went to download and flshed 4.2.2 stock multiple times but no success with wifi or sound please help. it is all stock i erased all memory and retored to stock. 4.2.2 stock Bell Canadian i337m. Please help.
This solution worked for me - http://missingtricks.net/firmware-upgrade-encountered-issue-solution-samsung/

[SOLVED] Samsung Grand Duos I9082 stuck in startup loop

I have Flashed my Samsung Galaxy Grand Duos (i9082) running 4.1.2 with Resurrection Remix 4.4.2. Everything went smooth there was no error at all.
After flashing my phone is stuck in Startup loop(Screenshot 1). I am able to go in Download Mode and Recovery Mode, but when I connect my phone to my PC in download mode and run ODIN 3.07 it does not show my phone (Screenshot 2).
Any help much appreciated.
I don't think I brick it or did I?
Grim_R3apeR said:
I have Flashed my Samsung Galaxy Grand Duos (i9082) running 4.1.2 with Resurrection Remix 4.4.2. Everything went smooth there was no error at all.
After flashing my phone is stuck in Startup loop(Screenshot 1). I am able to go in Download Mode and Recovery Mode, but when I connect my phone to my PC in download mode and run ODIN 3.07 it does not show my phone (Screenshot 2).
Any help much appreciated.
I don't think I brick it or did I?
Click to expand...
Click to collapse
Rr needs 4.2.2 jellybean official as a base its based on 4.2.2 bootloader and u flashed over 4.1.2 results a bootloop so all you can do is in Stock recovery wipe data and cache uninstall kies and re install then connect yo phone kies will detect it in download mode after pushing vol up Connect yo i9082 odin will detect it for sure then flash latest 4.2.2 firmware and enjoy any custom rom! [emoji6]
Sent from my GT-I9505 using Tapatalk
Thank You!
Sulaimanshariff said:
Rr needs 4.2.2 jellybean official as a base its based on 4.2.2 bootloader and u flashed over 4.1.2 results a bootloop so all you can do is in Stock recovery wipe data and cache uninstall kies and re install then connect yo phone kies will detect it in download mode after pushing vol up Connect yo i9082 odin will detect it for sure then flash latest 4.2.2 firmware and enjoy any custom rom! [emoji6]
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Thank you so much mate. I followed the exact steps and it did work for me.
Appreciate your Help :cyclops: :highfive:
Pls edit and add (SOLVED) to ur OP & Title.

[SOS] only download mode, read please

Hi, sorry for my english.I ll try to explain my situation:
1 flash cf-root with odin, it work ok
2 flash twrp with odin and then (my friend suggest me) flash newest bootloader with odin beacouse he want install a newest mod.
Now phone stuk on galaxy note 2 logo at startup.
But there is a big problem, i can go only in download mode and when i try to flash a stock rom odin stops at system.img and don t go...
I tried with kies too but it stops to work at the same
Any idea?
Thank you all
I tried other usb cable and other odin version and all work...

Categories

Resources