Samsung Galaxy Gio bootloop after flashing stock ROM via Odin - Samsung Galaxy Gio GT-S5660

Hello all,
Today I decided to go back to stock ROM via Odin.
I was using Milestone 6 based on new cm9. I did a factory reset via settings.
Then turned off my mobile and went to download mode.
Odin recognized my mobile and started the flashing process.
It showed pass message after 5 mins.
Now my mobile is bootloop. Samsung logo just keeps appearing again and again.
I tried to access recovery but I cant access it.
What am I supposed to do.
Any help would be highly appreciated.
Thank you

Hi
I was have like your problem (the same!!)
So what I do is firstly flash the 2.3.3 via Odin, then I flash again the 2.3.6 via Odin
When I flash 2.3.6 without flash firstly 2.3.3 , it dosent work ... the samsung logo repeat it selfs ...
That's what I do..... if some one haves easy way plz help us?!!!!
Sent from my GT-S5660 using Tapatalk 2

Thanks it worked I am not flashing to 2.3.6 and will stick to 2.3.3

pranjaldixit said:
Thanks it worked I am not flashing to 2.3.6 and will stick to 2.3.3
Click to expand...
Click to collapse
'Well it's fine to stick with your 2.3.3 and if you want to go to 2.3.6 you dont have to use odin, just go to samsung's official padge, search for your phone, install samsung kais and brchause you tawe rhe official android rom for Gio you will be soon notified that a higher wersion of android is awailable, so you can update to the latest version with kais :good:

Related

[Q] Updating firmware problem??

Hi guys, I've been trying for a lot of times to update the firmware of my galaxy w but it fails every time.. It keeps coming out with an error .
I am using CWM recovery and is there a way to revert back to the stock recovery so that I can update using the phone itself??!
Hi, you can flash the stock recovery using odin.
[HowTo] Flash a firmware with ODIN on Samsung Galaxy W(I8150)
In this thread u can find how to do it, and in post #3 there is the file for the stock recovery
The stock recovery is required to update the stock rom. It is also mentioned in the FAQ.
Here is how you flash the stock recovery. Scroll down to others.
EDIT: A bit to slow ;-)
greets
THE-E
Alright! Thanks guys! Appreciate the help alot!

[Q] Cant go to the stock Note II rom after flashing Leaked 4.1.2

Hellou guys this is the first time I actually opened a new thread since the day I sign up on this site.
I tried Leaked ROM from Samsung ( 4.1.2 ) and I didnt really like it. So I wanted to flash back to my stock rom which I downloaded from this site.
The problem is that after flashing back to stock rom I got stuck at "SAMSUNG" then I though that i bricked my phone and flashed back to the Leaked 4.1.2 With the Pit file otherwise it stucks at "Samsung" either.
So I still want my Stock Rom back and I think I need PIT file for my Stock Rom which isnt included in my Rar file for rom.
After flashing Leaked 4.1.2 I tried this rom: N7100XXALJ3 N7100MOTALJ2 - Download - Slovenia (Mobitel)
And Got stuck and the Samsung Logo then I tried to flash back the Leaked rom without the PIT file and got stuck at the Samsung Logo again.
Then i flashed Leaked rom again with the pit File and it works just fine But I want to go back to My Stock rom/Firmware or whaeva it is
I flashed these roms with the Odin V3.04
Sorr for my bad English I am Slovenian. (=
unreal1992 said:
Hellou guys this is the first time I actually opened a new thread since the day I sign up on this site.
I tried Leaked ROM from Samsung ( 4.1.2 ) and I didnt really like it. So I wanted to flash back to my stock rom which I downloaded from this site.
The problem is that after flashing back to stock rom I got stuck at "SAMSUNG" then I though that i bricked my phone and flashed back to the Leaked 4.1.2 With the Pit file otherwise it stucks at "Samsung" either.
So I still want my Stock Rom back and I think I need PIT file for my Stock Rom which isnt included in my Rar file for rom.
After flashing Leaked 4.1.2 I tried this rom: N7100XXALJ3 N7100MOTALJ2 - Download - Slovenia (Mobitel)
And Got stuck and the Samsung Logo then I tried to flash back the Leaked rom without the PIT file and got stuck at the Samsung Logo again.
Then i flashed Leaked rom again with the pit File and it works just fine But I want to go back to My Stock rom/Firmware or whaeva it is
I flashed these roms with the Odin V3.04
Sorr for my bad English I am Slovenian. (=
Click to expand...
Click to collapse
try mobile odin and flash cwm recovery put rom on phone then format system and cashes and data then try
sloppy1 said:
try mobile odin and flash cwm recovery put rom on phone then format system and cashes and data then try
Click to expand...
Click to collapse
I will try that. Once I download the needed files. will write back Tnx.
sloppy1 said:
try mobile odin and flash cwm recovery put rom on phone then format system and cashes and data then try
Click to expand...
Click to collapse
IT worked! Thank you again! ^_^ I needed to format system and data caches and I also wiped data and stuff.. Turned off the phone and flashed the STOCK rom via Odin and it bootet just fine everything works and Im happy with the stock rom. Now I see i have a counter 4. because I was rooting the phone. What does this counter mean? I mean will I be able to get new updates and stuff from Samsung now?
unreal1992 said:
IT worked! Thank you again! ^_^ I needed to format system and data caches and I also wiped data and stuff.. Turned off the phone and flashed the STOCK rom via Odin and it bootet just fine everything works and Im happy with the stock rom. Now I see i have a counter 4. because I was rooting the phone. What does this counter mean? I mean will I be able to get new updates and stuff from Samsung now?
Click to expand...
Click to collapse
triangle away will put ur flash counter to zero
Stock rom and omega
Hi guys,
can I flash note GT-N7100 ( JRO03C.N7100XXALIJ) with omega v7.3 firmware XXDLJ2? Thanks
space38 said:
Hi guys,
can I flash note GT-N7100 ( JRO03C.N7100XXALIJ) with omega v7.3 firmware XXDLJ2? Thanks
Click to expand...
Click to collapse
as long as ur rooted

[Q] update of stock rom led to recovery failure

Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
rezaasl2000 said:
Hi,
I just got my Galaxy S III and decided to root it. I had done it before. I made a mistake and it wouldn't reboot, so, I had to put the stock rom on the device again. I found the stock rom, which was a 4.0.4 version and flashed it with no problem. But, then, the automatic update installed the 4.1.1 version. Here is when the problem starts: after installation, when I try to go into the recovery mode to clear the cache, the android is dead with a read triangle above it. I don't know what to do since I want to flash a custom rom.
Oh, a small detail that might be important. The stock rom is flashed using ODIN, but the reboot process is so lengthy, I have to remove the battery and then clear the cache before it fully reboots. At this stage (still 4.0.4) there is no problem with recovery mode and everything is fine. It is only after the update to 4.1.1 that the problem starts.
Your helps are much appreciated.:angel:
Click to expand...
Click to collapse
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
hednik said:
So you can esily flash 4.0.4 with no hiccup but then you get the update (kies I assume) and it fails ?
Do you want to be rooted ?
if not just flash the stock 4.1.1 from Sammobile in Odin and update that way to avoid that Kies garbage
Click to expand...
Click to collapse
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
rezaasl2000 said:
Thanks for the reply. I do want to be rooted. Mine is an i747. Can you attach the link so I don't download the wrong one?
Click to expand...
Click to collapse
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
hednik said:
Find your carrier and flash one of these in Odin as they are pre-rooted.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
rezaasl2000 said:
Thank you so much for the reply. After purchasing my g3 from AT&T, I used the same link you just sent me to flash the device. But it didn't work even though I changed the USB port. It installs SuperSU, but the recovery fails. I will try it one more time before and report back to you.
thanks again.
Click to expand...
Click to collapse
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
rezaasl2000 said:
It failed again (dead android with a red triangle above it). I have checked the ODIN version, whether the md5 file was downloaded correctly. I'm very frustrated.
Click to expand...
Click to collapse
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
hednik said:
So you can't flash anything 4.1.1 or 4.1.2 ? That's odd that only 4.0.4 works. Does it fail with Kies too ?
What about just rooting using CF-auto root or casual and then flashing a rom ?
Click to expand...
Click to collapse
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
rezaasl2000 said:
Okay, so, this method didn't work either. I went back to the link you sent me with the pre-rooted version and flashed it. Now, it has the same problem (dead android with red triangle), but RootChecker says that I'm rooted. I don't know what difference that makes.
Any thoughts?
Click to expand...
Click to collapse
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
hednik said:
So cf auto root worked but you can't flash ? You need to install a recovery. Can you flash a custom recovery in Odin or mobile Odin ?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
So, I finally figured it out. I used the samsung galaxy s3 toolkit to install the stock firmware and then I updated it on the phone. Next, I went back to the toolkit and installed the most recent version of CWM on it and everything just worked beautifully. I have LiquidSmooth installed and it works just great.
thank you for the help hendik.
:good:

[Q] Soft Bricked Note 2 Verizon. HELP! URGENT!

I am not new to rooting and flashing rom however, I switched from my rooted GS3 running CM11 to the Note 2. I flashed the stock firmware (root66) and made the mistake of running the OTA 4.1.2 update which caused my note to be soft bricked. The phone boots to the samsung logo and freezes there. I flashed several stock firmware using odin that pass but when my phone reboots it freezes at the samsung logo. I can not access recovery mode, only downloading mode. I know its a way to fix this I'm just not sure how. Any suggestions?
MaddenMS6 said:
I am not new to rooting and flashing rom however, I switched from my rooted GS3 running CM11 to the Note 2. I flashed the stock firmware (root66) and made the mistake of running the OTA 4.1.2 update which caused my note to be soft bricked. The phone boots to the samsung logo and freezes there. I flashed several stock firmware using odin that pass but when my phone reboots it freezes at the samsung logo. I can not access recovery mode, only downloading mode. I know its a way to fix this I'm just not sure how. Any suggestions?
Click to expand...
Click to collapse
Easy peasy, flash philz v5.00.5 (not the latest) through odin then u should be able to access recovery, from recovery flash a custom ROM so u can get unstuck, then when everything is fine, flash a stock rom from sammobile and hopefully it should work.
With Regards,
Overdub
Smack the thanks if I helped.
Sent from my GT-N7100 using Tapatalk

[Q] my phone stuck at samsung logo......... help please!!!!!!

i used CWM-touch_i9082_chotu.tar for flashing and the roms, gapps-kk-201404-signed, probam_aosb_kk_1.3.7_i9082 for upgradind my rooted galaxy grand i9082 from android 4.1.2 to android 4.4.4. but at the end when i rebooted my phone it got stuck on samsung logo. however i can still go to download mode. what to do pls help!!!!!!!
manish12063 said:
i used CWM-touch_i9082_chotu.tar for flashing and the roms, gapps-kk-201404-signed, probam_aosb_kk_1.3.7_i9082 for upgradind my rooted galaxy grand i9082 from android 4.1.2 to android 4.4.4. but at the end when i rebooted my phone it got stuck on samsung logo. however i can still go to download mode. what to do pls help!!!!!!!
Click to expand...
Click to collapse
I THINK YOU MADE A MISTAKE YOU SHOULD BE ON 4.2JB TO FLASH KITKAT CUSTOM ROMS...
go to recovery mode and WIPE DATA AND REBOOT....
IF THIS DOESNOT WORK , FLASH STOCK 4.2.2 THROUGH ODIN AND THEN FLASH CUSTOM ROM..
wiping data is not woking. so finally you mean again i will have to use odin and flash by tar.md5 file and flash 4.2J rom and then again repeat for 4.4.4 rom. i just want to be sure if there is no risk.
And thanks for the rply
manish12063 said:
you mean again i will have to use odin and flash by tar.md5 file and flash 4.2J rom and then again repeat for 4.4.4 rom. i just want to be sure if there is no risk.
And thanks for the rply
Click to expand...
Click to collapse
Exactly .

Categories

Resources