Develop Bugs

Samsung i780 PDA ok PHONE not ok!?

Hello ,
Can anybody help i have i780 and there was WM6.5 23412 and i tried to update it to 23420 or 23071 but with both of these rom i got problem with flashing PHONE with mirage but failing in 50-70 % depending the size of rom..
I have had done it before to and no problems wasnt then ,and right know i have only pda functions and in the version button in settings there is only PDA number PHONE is blank,
using windows 7 and virtual windows xp!
Can anybody tell what may go wrong?
I have tried different things but neither on them working!
Sry my bad english!

Man, just realised what are you doing.
You are trying to flash PDA part to PHONE
All ROM's that are cooked are only PDA part!
PHONE part stills untouch!
You have now to reflash PDA and PHONE from offical samsung firmware.
After that you flash ONLY PDA part from any new version found here.
Good luck!

Just for case:I just say that with wm6.5 all was working probably. after ja try phone side was writing filed , last thing what i was tried was PDA side over flash in it worked! BUT PHONE side of mirage fail writing!

arxxx86 said:
Just for case:I just say that with wm6.5 all was working probably. after ja try phone side was writing filed , last thing what i was tried was PDA side over flash in it worked! BUT PHONE side of mirage fail writing!
Click to expand...
Click to collapse
Ah thats simple. To flash phone part flasher changes usb state to cdma modem driver. So u need to install it first.
CDMA Modem Drivers:
XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970110&coflag=0
Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970108&coflag=0

failed!
Device name:6&22194588&0&1
EBoot version=01.35
Start downloading...
PHONE-Switching USB to PHONE...
PHONE-COM3 detected
PHONE-Attempting to open COM 3...
PHONE-Create COM 3 succeed...
PHONE-Opening COM 3 succeed...
PHONE-Waiting for erasing CODE area...
PHONE-Erasing CODE area complete...
PHONE-Writing failed at 69.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Man you make me smiling! I wrote about this mistake before!
Look where you have to flash new ROM's - it"s PDA part (not PHONE)
So now phone part is wrong, because you have flash it with pda bin.
Make nwo next procedure:
Open in "PDA" : WM6.5.. ..bin
Open in "Phone": phone.bin (find download link below)
Flash! After first boot make hard reset.
Good luck
Phone part http://www.mediafire.com/file/mnzyd2mzdi5/PHONE.rar. Dont forget to upack phone.bin from rar

thank you! It worked ! I understand i before wanted to but pda to phone part!
but firstly when i got that mobile there was wm6.0 then i upgrade it to 6.1 and then with bin fail 6.5 but i remembered that i put both wm6.5 bin to pda and phone part and then it worked... or i might done something differently
anyway big thanks to you

Thank You
I had the same Problem i had already flashed Samsung Official rom at the end But fails to write the Phone with official .bin for phone..its giving error at Exactly 50%..
Let me try Your method..Hope it works for me too..
Thanks in Advance

hi mate
I have tried Your method of only flashing the Phone.bin (as per attached Pic)
I think there is some serious problem with the flashing part or the tool ...
may be the new version of Multi Downloader has any option to revive the Phone ..
Currently My phone has NO Network.
Can You help me...

Try some solutions:
1. download with phone part from (link I provided before).
2. There can be another trouble with CDMA drivers or USB. XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970107&coflag=0 Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970109&coflag=0
Reinstall drivers. Connect USB to rear of PC not front. retry
3. download full upgrade (including upgadetool) XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970112&coflag=0 Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970111&coflag=0
4. If doesnt help- try to flash on another PC with XP or Win7(use XP drivers).

Heineken78,
thanks for your help. I made the same mistake - flashed the phone part - and had a bit of trouble finding out how the solve the problem. Your solution is very easy to implement and very effective.
Thanks a lot!

Odin help needed please

My friend just got an S4 Mini 19195 LTE The same as me on fleabay but it had a different Rom in it .. some overseas Rom
So we are trying to install the I9195XXUAMH2_I9195OXXAMH4_I9195XXUAMH2_ Rom for the UK Region
Flashing via ODIN (did this many times) but on his it comes up Fail when flashing xmit write fail or something...
Do I need a PIT File ?
It goes to recovery and Download with no issues
Tried with and without Sim and SD Card...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same thing happens with ODIN 3.07 / 3.09
Help please as soon as you can...

try reinstall the drivers

EwOkie said:
My friend just got an S4 Mini 19195 LTE The same as me on fleabay but it had a different Rom in it .. some overseas Rom
So we are trying to install the I9195XXUAMH2_I9195OXXAMH4_I9195XXUAMH2_ Rom for the UK Region
Flashing via ODIN (did this many times) but on his it comes up Fail when flashing xmit write fail or something...
Do I need a PIT File ?
It goes to recovery and Download with no issues
Tried with and without Sim and SD Card...
Same thing happens with ODIN 3.07 / 3.09
Help please as soon as you can...
Click to expand...
Click to collapse
You said "some overseas" ROM, then I think root is the way as it is region locked (as all new Samsung devices).

Got it connected it was something to do with PC as I was trying it with Windows 7 and works with no issues with XP
How do I do a clean install to flash stock rom as when i try it some files and folders are still present

Do hard reset before and after flashing.
Sent from my GT-I9195 using XDA Premium 4 mobile app

aspot72 said:
Do hard reset before and after flashing.
Sent from my GT-I9195 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks will try that I am trying to put I9195XXUAMH2_I9195OXXAMH4_I9195XXUAMH2_HOME.tar Rom to it
Am I better with a custom kernel or ??
As when i use this post HERE for Rooting
I encounter an error like this : unknown volume for path (sd/ext)
Sometimes the PC doesnt copy files over which i think something is wrong with partition

EwOkie said:
Thanks will try that I am trying to put I9195XXUAMH2_I9195OXXAMH4_I9195XXUAMH2_HOME.tar Rom to it
Am I better with a custom kernel or ??
As when i use this post HERE for Rooting
I encounter an error like this : unknown volume for path (sd/ext)
Sometimes the PC doesnt copy files over which i think something is wrong with partition
Click to expand...
Click to collapse
Custom kernel is better with some custom ROMs.
I am using W7 Ultimate and no problems at all.
I would suggest you to uninstall all Samsung stuff, clear PC cache and restart. Reinstall drivers connect your phone and let install drivers. Don't install KIES. Unplug phone from PC and do hard reset (either via Menu or Home+Vol Up+Power).Then turn off your phone and reboot to download mode, connect to PC wait for driver installation and when Odin shows/recognized phone proceed with flashing. It takes about 5 min.
My CSC showing TSI (???) but flashed generic UK(BTU) and generic German (DBT) ROMs without any problems.
I have used this ( I9195XXUAMH2_I9195OXXAMH4_BTU) from Sammobile.
Not sure about Samsung's region lock, but I think its just 3 regions : EMEA, Asia and Americas.

[Q] GT-N7100 Soft-Brick

Hey Guys
1- I'v rooted my GT-N7100 long time ago (couldn't remember the method but the developer said the methood doesn't make any alteration to your device, Just root privilege. even doesn't install CWM)
2- I'v installed CWM through "ROM Manager" android app last week.
3- Installed some 4.4.2 ROMs but all unstable, crashing in few minutes. (All the ROMs got good comment 'n I think there is a problem with my device!!)
- DN3 (Ditto Note 3) ROM
- JellyKatv4
- CM11 ROM for Galaxy Note 2
- BLUE LIGHTNING
4- Decided to flash official 4.3 firmware downloaded from: "http://www.sammobile.com/firmwares/3/?download=12202" through ODIN, but got "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“ message.
5- Decided to unbrick with ODIN, but every-time it fails (tried different ODIN versions 'n different USB ports)
6- Tried to do so with KIES, but it does not recognize the device (Stucks on connecting message, troubleshooting doesn't effect). Also tried "Tools> Firmware Upgrade and Initialization" option directly, It crashes in EVERY STEPS.
So if u have any Idea to fix this, please share!
Afshin

lazzara said:
Hey Guys
1- I'v rooted my GT-N7100 long time ago (couldn't remember the method but the developer said the methood doesn't make any alteration to your device, Just root privilege. even doesn't install CWM)
2- I'v installed CWM through "ROM Manager" android app last week.
3- Installed some 4.4.2 ROMs but all unstable, crashing in few minutes. (All the ROMs got good comment 'n I think there is a problem with my device!!)
- DN3 (Ditto Note 3) ROM
- JellyKatv4
- CM11 ROM for Galaxy Note 2
- BLUE LIGHTNING
4- Decided to flash official 4.3 firmware downloaded from: "http://www.sammobile.com/firmwares/3/?download=12202" through ODIN, but got "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“ message.
5- Decided to unbrick with ODIN, but every-time it fails (tried different ODIN versions 'n different USB ports)
6- Tried to do so with KIES, but it does not recognize the device (Stucks on connecting message, troubleshooting doesn't effect). Also tried "Tools> Firmware Upgrade and Initialization" option directly, It crashes in EVERY STEPS.
So if u have any Idea to fix this, please share!
Afshin
Click to expand...
Click to collapse
Verify you've correct drivers installed and a working USB cable. Have you tried flashing your phone under PDA Tab? With only 'Auto Reboot' checked.
Odin v3.07: https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNEs2NnDVm8eh5Fkl5x_eCDMptJLAg
Drivers: http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows

The sime thing to me
I instal philz recovery from odin
Thin instal wanam room fron recovery
After update to 4.4.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
أرسلت من SM-N9005 الخاص بي باستخدام تاباتوك

did you manage to recover your device? I have same problem and nothing helps to recover my handset What the screen displays on your device in DL mode? can you put your device into bootloader mode?

finally recoverd my phone
Went to an expert 'n he gave me a 4 file 4.3 firmware package 'n it works for me, but I feel the official 4.3 firmware is too slow on my device!?

Downgrade from 4.1.2 to 4.1.1

Hi, I'm on a rooted i747m http://i.imgur.com/u65sAbb.png from telus, I wanna switch carrier and feel like unlocking it myself. Apparently there a working method on 4.1.1 http://forum.xda-developers.com/showthread.php?t=2529200 but I'm stuck in the downgrading part . I get the same message on multiples versions of ODIN (1.85, 3.04, 3.07) :
Code:
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)" : aboot
and a red SECURE CHECK FAIL in my i747m.
I tried many different 4.1.1 firmware from different carriers (also 4.1.2 stock from telus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
) but I always get the same errors. I have no idea what I should do next.
any help is appreciated thanks

The aboot message leads me to believe you are trying to flash a bootloader that is not compatible with your phone.
Are you able to confirm the bootloader on your phone?

audit13 said:
The aboot message leads me to believe you are trying to flash a bootloader that is not compatible with your phone.
Are you able to confirm the bootloader on your phone?
Click to expand...
Click to collapse
Not sure how can I do that, I don't know any other way than check the phone system information
thanks

Install the Samsung Phone App from the Play store and run it. It will give you information about your phone.
If you have the terminal app on your phone, you could use that app to type in "getprop ro.bootloader".

i747mvldmf1 like my phone system information says

Looks like you should be able to flash the 4.1.1 firmware from sammobile.com using Odin.

audit13 said:
Looks like you should be able to flash the 4.1.1 firmware from sammobile.com using Odin.
Click to expand...
Click to collapse
it may look like so but I can't hence the reason why I posted this thread

What version of Odin are you using? You're putting the phone in download mode? Do you see the progress bar in download mode progress to 100%?

audit13 said:
What version of Odin are you using? You're putting the phone in download mode? Do you see the progress bar in download mode progress to 100%?
Click to expand...
Click to collapse
It says which ODIN version I've used and yes im im download mode but whatever Odin Mobile succesfully flashed 4.1.1. Thanks @Chainfire and thanks to you for trying to help me

Sorry, I missed the part where you mentioned the versions of Odin you used.
Were you able to unlock the phone? From what I remember, mobile Odin does not flash a bootloader.

audit13 said:
Sorry, I missed the part where you mentioned the versions of Odin you used.
Were you able to unlock the phone? From what I remember, mobile Odin does not flash a bootloader.
Click to expand...
Click to collapse
Yes with mobile odin I downgraded to 4.1.1 (telus not att as the unlock thread says) , unlocked the phone, flashed to 4.1.2, rooted it, recoverd my nandroid backup with latest clockworkmod recovery (i had an old version that couldnt restore 2gb+ backups), updated to 4.42 and rooted again the phone.

Glad you got it all sorted out

Odin Fails when trying to stock restore

Hello everyone,
Today I was attempting to revert back to stock on my sprint gs3 (in order to update the modem software version to nd8) using a one-click made by rwilco12. (Unfortunately, I am unable to provide the link, but it is on this website).
Essentially, it is an all-in-one .exe file which contains odin and the stock firmware combined. I followed all of the instructions, yet after I press "start", odin fails nearly 20 seconds later, with the phone (which is on download mode) saying, "Secure check fail : aboot".
As of this time, the phone is still connected to my computer and is still in download mode. Is it safe for me to attempt to restart the phone while it's still in download mode and try again? And, if not, is there a solution to the "secure check fail : aboot" problem?
Any help would be EXTREMELY appreciated! Thanks!

Yes you can unplug and restart. Try a different port, or cable.
Also, are you sure your phone isn't a triband?
If you're sure its not a triband, then you don't have to bother with one clicks. Plus nd8 is very old. You can try nj2 or oh1. Just get a clean version of odin and the .tar you need.

madbat99 said:
Yes you can unplug and restart. Try a different port, or cable.
Also, are you sure your phone isn't a triband?
If you're sure its not a triband, then you don't have to bother with one clicks. Plus nd8 is very old. You can try nj2 or oh1. Just get a clean version of odin and the .tar you need.
Click to expand...
Click to collapse
Thank you for your prompt response, I am now downloading the stock nd8 odin flashable tar.
As for the one click, I tried a different cable, port and computer, but all with the same results. I'm not sure if this is helpful or not, but here is a screenshot of the error the one click is giving me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, what is the "triband" version you referred to earlier? Is there a way to find out while still in download mode?
Thanks again your help.

The triband is model sph-l710t. The "t" at the end makes it triband. Different phone, different .tar.
Also, try this odin.

madbat99 said:
The triband is model sph-l710t. The "t" at the end makes it triband. Different phone, different .tar.
Also, try this odin.
Click to expand...
Click to collapse
Alright, thank you. It is definitely not a triband model, as download mode states it as "sph-l710" only. I will try that odin with the nd8 tar I just downloaded.
Thanks again for your help.

Also, on the odin that you pointed to, which of the buttons is the equivalent to the "pda" button from the older versions of odin?

neondev said:
Also, on the odin that you pointed to, which of the buttons is the equivalent to the "pda" button from the older versions of odin?
Click to expand...
Click to collapse
It's the AP button.

kozak6 said:
It's the AP button.
Click to expand...
Click to collapse
Thanks @kozak6 . appreciate that, guess I fell asleep at the wheel, lol.

I finally got it to restore! Thanks to everyone who helped!