Related
Hi All
For the last couple of months my desire has had an intermittent problem with the touch screen. All of a sudden it decides you're trying to pull down the "notifications" screen when you're just touching the touch screen, sometimes it also decides you're trying to hold and drag when you're just tapping the screen, sometimes it simply stops responding. These problems are usually solved by tapping the top button and putting the phone on standby then tapping it again and waking it up - although sometimes it then won't let you drag down the screen unlock until you repeat the on/off standby procedure a couple of times. The problem varies on connecting my phone to my computer.
Given that in between these instances the touch screen works as normal I'm guessing it shouldn't be a hardware issue, but the intervals between these problems appear to be getting shorter (either that or I'm just getting more annoyed by it recently). I've had a quick search of the forums and haven't immediately found anyone having this precise problem. Is it likely a question of trying factory reset and if that fails sending it for repair?
Thanks in advance
Similar issues. Don't think this is hardware.
Sent from my HTC Vision using xda premium
Gotta know more about the phone first. Is there a custom rom? Have you tried flashing to stock?
Dukenukemx said:
Gotta know more about the phone first. Is there a custom rom? Have you tried flashing to stock?
Click to expand...
Click to collapse
I'm having same problem, mine started couple weeks after I installed cm7.2, I tried another rom, no luck
Its definitely not software. I've tried froyo, gb stock with s-on and no root. I've been on ics roms cm7 roms but this problem occurs on all. I'm giving mine for service today.
Sent from my HTC Vision using xda premium
Well since the OP didn't respond here's my suggestions. If you think it's software then just flash to a stock rom. You should find a number of them lying around the forums, and instructions on how to flash. This will mean your phone is unrooted and will need to be rooted, as well as taking care of installing a recovery and etc. This should correct anything wrong with the software.
Otherwise you busted the digitizer, which is actually very cheap to buy on Ebay. You will have to take the phone apart which can be time consuming.
strawmetal said:
Its definitely not software. I've tried froyo, gb stock with s-on and no root. I've been on ics roms cm7 roms but this problem occurs on all. I'm giving mine for service today.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Hello,
Any luck with the Tocuh Input, is your phone back from service? I am also facing the same issue....
I had this problem on my G2 a while back. It was a hardware problem so I ordered a new touchscreen and replaced it myself.
Sent from my Nexus 7 using xda app-developers app
htc desire z touchscreen details
Whiskey_Tango said:
I had this problem on my G2 a while back. It was a hardware problem so I ordered a new touchscreen and replaced it myself.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Hello Whiskey_Tango / Others,
Can you please let me know the details of the touchscreen component that you ordered for your G2? My HTC desire Z touch screen has also gone bad (unresponsive at multiple points) and I feel that changing the hardwre should do the trick.
If possible, let me know the touchscreen specs (model / part number) as well as any online website from where I can order it !
Many Thanks !!
From eBay search for HTC g2 digitizer
Be careful to get the one for the vision not for the magic
should be about $20
Sent from my Nexus 7 using xda premium
demkantor said:
From eBay search for HTC g2 digitizer
Be careful to get the one for the vision not for the magic
should be about $20
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Thanks for the quick response. Before coming here, I had a mobile service shop take a look at my handset and he had mentioned that for HTC desire z, the "touch screen" comes with the "display" attached to it. Did he meant the digitizer only or (digitzer + LCD screen) or he was simply trying to rip me off ?
I am very sure that there is nothing wrong with the display on my handset, its only the touch functionality that is not working properly.
Which one of the following do I need to search on EBay?
gultek.eu/htc-spare-parts/digitizer-touchpad/desire-z.html
or gultek.eu/genuine-parts/lcd-modules/htc/desire-z-hd3.html
or both?
Thanks again in advance !!
You need just the digitizer, if you're doing it yourself it takes about an hour if you've never done it before, don't buy the lcd if you don't see a flaw in it.
Some people sell the whole front chasis with lcd, digitizer, front bezel all connected for ease of replacement. May be easier but you will only shave of 30min tops and spend 3x as much
Sent from my HTC Vision using Tapatalk 2
yeah this happens to my G2 a lot. I got my phone fixed a while back (2-3 months ago) becuase the colors on my screen were screwed up and the ear piece was broken. i took it in and he replaced a couple of cables. it worked fine but now sometimes the screen is just having a straight up seizure. it flips through pages so fast and it goes from page 1-2 and back and forth and then the virtual keyboard presses multiple keys and just its crazy. i feel like the guy that fixed my phone didnt plug in a cable all the way. but yeah thats my problem. i dropped my phone the other day and ever since my phone hasn't gone into a seizure lol
Hi, did you solve your problem? I have the same with my desire Z. It click alone in several place on my screen.
And I ask me if the problem don't come from the lcd digitizer control instead of the touch screen digitizer
strawmetal said:
Its definitely not software. I've tried froyo, gb stock with s-on and no root. I've been on ics roms cm7 roms but this problem occurs on all. I'm giving mine for service today.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Hi, did u fixed your phone? can you tell me what was the problem.. even my phone is acting crazy.. wil that be fixed if i change the screen digitizer?
ahmedrzvi said:
Hi, did u fixed your phone? can you tell me what was the problem.. even my phone is acting crazy.. wil that be fixed if i change the screen digitizer?
Click to expand...
Click to collapse
Yes replacing the digitizer did fix my problem. And a year later the replaced digitizer started giving problems. So I ordered 2 extra digitizers off ebay. Both of them turned out to be duds. Surprisingly the second digitizer(which I replaced a year ago) fixed itself.
I think Im having the same problem,
bottom part of screen (including the home, menu, back, search buttons) aren't functioning half the time,
is there any service manual, or link to information as to what I need to tear apart on my DZ?
should this be enough? EBAYLINK
what do I need to replace the digitizer?
Today is a very sad day for me somehow my new htc one x's capaticive buttons stopped working i restarted and even factory resetted and they are not working anymore
my previous htc hd2 was stopped digitizer working too. How unlucky i am.
I guess I neet to install CWM and using on screen button
which rom do you reccomend? ı used to install couple roms to hd2 but i havent tried with one x
thank you all
Factory reset will only reset it to the rom you have flashed. Have you tried flashing the correct ruu for your phone? When you say it's new, how new? New enough to return to where you got it for replacement?
Sent from my HTC One X using Tapatalk 2
Yes this happened to me two days ago as well my buttons light up but that it so I looked everywhere for a fix but no luck now I'm on icsCOLDJELLY 3.2.1 AOKP so now I can use my phone not to sure if I did something wrong when I flashed ANDROID revolution 12 or maybe the firmware
Sent from my HTC One X using xda premium
I have installed icecoldjelly but then I had problem with mobile network :s
capacitive buttons stopped working
my htc one x touch sensitive buttons have stopped working like a week ago, i then installed the coldjellybean by which i got that onscreen buttons after 2 days the buttons started working n i thought of selling the set but as i was going to make a deal with a person that day the problem appeared again, i dont have the warranty left and the screen replacement is quite not an option. Is there any trick that i can work on to make them work again.
ZOHAIBAR said:
my htc one x touch sensitive buttons have stopped working like a week ago, i then installed the coldjellybean by which i got that onscreen buttons after 2 days the buttons started working n i thought of selling the set but as i was going to make a deal with a person that day the problem appeared again, i dont have the warranty left and the screen replacement is quite not an option. Is there any trick that i can work on to make them work again.
Click to expand...
Click to collapse
it could be just the digitizer and on ebay you can find it quite cheap.
fireblade said:
it could be just the digitizer and on ebay you can find it quite cheap.
Click to expand...
Click to collapse
i took the phone to my local market n came to know that the their isnt any separate capacitive buttons cable, it is embedded within the lcd, so if i have to order then whole complete lcd + digizer + module, and i checked the online purchase price is almost the same price the local market ppl are offering that is near 60 dollars.
Just that i am not sure why does the buttons stopped working and if somehow why they started working n now have again stopped ;(
ZOHAIBAR said:
i took the phone to my local market n came to know that the their isnt any separate capacitive buttons cable, it is embedded within the lcd,
Click to expand...
Click to collapse
not sure what you mean.. look at this: http://www.ebay.com/itm/New-Touch-S...865?pt=LH_DefaultDomain_0&hash=item4d02ec98e9
anyway it happened to me with another phone that a portion of the digitizer stopped working for a few days, then it started working again and then it stopped for good and had to replace it.
fireblade said:
not sure what you mean.. look at this: http://www.ebay.com/itm/New-Touch-S...865?pt=LH_DefaultDomain_0&hash=item4d02ec98e9
anyway it happened to me with another phone that a portion of the digitizer stopped working for a few days, then it started working again and then it stopped for good and had to replace it.
Click to expand...
Click to collapse
hmmm, well actually i was reading all the other threads with this issue and came upton this
Code:
http://forum.xda-developers.com/showthread.php?t=1696552
Which shows "DO NOT try to replace the screen by yourself" and i can see that on my set that its rather v hard to do this thing instead everyone says to buy the whole module as it is very complex thing to do.
ZOHAIBAR said:
hmmm, well actually i was reading all the other threads with this issue and came upton this
Code:
http://forum.xda-developers.com/showthread.php?t=1696552
Which shows "DO NOT try to replace the screen by yourself" and i can see that on my set that its rather v hard to do this thing instead everyone says to buy the whole module as it is very complex thing to do.
Click to expand...
Click to collapse
it is hard to separate the digitizer from the lcd but it's doable and nothing like the iphone digi+lcd that uses an epoxy adhesive. so if you are carefull (or have someone skilled doing it for you) you wont break the lcd and you'll save quite some money. it's true though that the new digitizer wont stick to the lcd as well as a "genuine combo digi+lcd" and you will notice dust building in between the two. my advice, if you know someone that is skilled enough, try get the digitizer off without breaking the lcd and if you manage that then buy the new digitizer. otherwise since you said that changing the whole digi+lcd is not an option you can always try sell your one x as damaged or use it as an expensive paperweight.
best of luck mate, i hope you solve it one way or another.
fireblade said:
it is hard to separate the digitizer from the lcd but it's doable and nothing like the iphone digi+lcd that uses an epoxy adhesive. so if you are carefull (or have someone skilled doing it for you) you wont break the lcd and you'll save quite some money. it's true though that the new digitizer wont stick to the lcd as well as a "genuine combo digi+lcd" and you will notice dust building in between the two. my advice, if you know someone that is skilled enough, try get the digitizer off without breaking the lcd and if you manage that then buy the new digitizer. otherwise since you said that changing the whole digi+lcd is not an option you can always try sell your one x as damaged or use it as an expensive paperweight.
best of luck mate, i hope you solve it one way or another.
Click to expand...
Click to collapse
haha that paperweight thing made my day... well thanks for the advice but i think i am going to wait until it gets ok by itself as it happened before until then icecoldjelly rom would be a temporary solution for the onscreen buttons. Thanks anyway
Well almost all HTC desire devices have an overheating problem causing them to reboot every time we use them.
Well I tried something that actually worked!
You need to have the required skills in order to do this
You need :
1:a clean soft brush(tooth brush recommended)
2:Tools to disassemble the HTC desire
3isassembly manual
4:Electric contact cleaner
Procedure :
1: Disassembly your HTC desire and just unplug only the mainboard and the upper board (that includes the camera)
2: CAREFULLY open the metallic box located to the main board (the one that is under the display and has the CPU inside)
3: use the electric contact cleaner and spray everything inside that box
4: CAREFULLY use the tooth brush to clean it from inside by making soft movements !!
5: wait for 5 minutes for the electric contact cleaner dissapears
6: Do the same in the camera mainboard but don't open anyone metallic box , just from the top
7: Start assembling the HTC desire
8: Test it and write down if it worked
Note : a friend of mine told me that you don't have to open the metallic box that protects the CPU,just use the electric cleaner and be sure that you have sprayed everything ! And this guide is tested on 4 HTC desires with the same problem all of them 100% success !
WARNING: USE THIS GUIDE AT YOUR OWN RISK ! I AM NOT RESPONSIBLE FOR ANY KIND OF DAMAGE!
I personally tested it as I said on 4 HTC desires and it worked !
Just test it and write it.I was looking for 1 year how to solve this problem and I believe I found the solution.
Sent from my HTC Desire using xda app-developers app
Screenshots on how to do it will come soon
Sent from my HTC Desire using xda app-developers app
Hello,
This is the thread I was looking for since I got one HTC Desire with the message “repair it and take it, or throw it into trash”. Luckily for me, that was only few weeks ago, therefore I didn't suffered like other proud Desire owners.
I can power-on the phone but it will stuck on HTC logo or it will do reset loop (several times) finishing with 7 vibrations and HTC logo.
It was failing on RUU updates because of radio; then I decided to freeze phone (only device without battery, sd card and sim). After that, I was able to update the phone...freeze it again, s-off it...freeze it again...flash it with custom rom...freeze it....etc.
I was planning to apply some thermal compound inside and maybe cut some pieces for better airflow but Your solution seems great.
Is there any news about those 4 repaired phones? Are they still alive and performing well?
short update:
mine doesn't work after the procedure from first post.
however, it will still come alive (for the short time) after freezing. :/
Interesting post. is overheating a common problem on the desire?
My phone seems to crash every so often and sometimes gets really bad and doesnt wanna start up as mentioned above so am thinking whether its a overheating issue rather than software/hardware
sol01 said:
Interesting post. is overheating a common problem on the desire?
My phone seems to crash every so often and sometimes gets really bad and doesnt wanna start up as mentioned above so am thinking whether its a overheating issue rather than software/hardware
Click to expand...
Click to collapse
When your phone doesn't want to boot, put it in the freezer for 5 minutes. If it then boots normally, it's an overheating issue.
approve - this works, btw if anyone have any another questions then ask
Worked for me.. Problem Solved. Thankyou
Screenshots
nikosdd said:
Screenshots on how to do it will come soon
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Are these screenshots likely to appear anytime soon? thanks:fingers-crossed:
any pictures yet?
box ????
"CAREFULLY open the metallic box located to the main board
(the one that is under the display and has the CPU inside)"
I have disassembled the phone. There is a metal box on the back of the main board (directly behind the
sim card and sd cards slots) though it appears to be completely sealed. I do not see how it could be opened
and/or how the contact cleaner can get in to do anything.
I am missing something ? Anyone ?
thanks and best regards
neddy
I did this last night, and same result... the phone keep restarting... its 100% a overheat problem cause here are +2°C and when i operate the phone outside , is working without any problem, but when im in the house at +25 the phone start acting weird...(restarting)...
---------- Post added at 01:05 PM ---------- Previous post was at 12:55 PM ----------
sorry for double post but just want to add that something... the second time i opened the phone, ive put some thermal paste (processor paste ) on top of black cip's, but same result... the phone keep restarting... other ideas???
I tried this
and had no luck. I think it may be absolute tosh. we were promised photos of the procedure...
we are still waiting for them
Not working for me too... bad news problem not solved - we need new motherboard... i will sale the phone for spare parts....
When I read the titel of the postig i feel so lucky but as i read the rest of the postings...
The desire is such a great phone but the heat problem su**s.
Hope someone will find a sollution that works for all of us.
Guys im really sorry for not posting screenshots but my HTC Desire died a few weeks ago(water xD) and im not an owner.. But 5 phones that i have repaired them with this way are working perfectly!
-zox- said:
Hello,
This is the thread I was looking for since I got one HTC Desire with the message “repair it and take it, or throw it into trash”. Luckily for me, that was only few weeks ago, therefore I didn't suffered like other proud Desire owners.
I can power-on the phone but it will stuck on HTC logo or it will do reset loop (several times) finishing with 7 vibrations and HTC logo.
It was failing on RUU updates because of radio; then I decided to freeze phone (only device without battery, sd card and sim). After that, I was able to update the phone...freeze it again, s-off it...freeze it again...flash it with custom rom...freeze it....etc.
I was planning to apply some thermal compound inside and maybe cut some pieces for better airflow but Your solution seems great.
Is there any news about those 4 repaired phones? Are they still alive and performing well?
Click to expand...
Click to collapse
I totally disagree with your opinion to apply thermal compound and cut some pieces. Thermal compound works for pc and in case you apply this,think that the hot will still remain inside and maybe get worse.Also cutting pieces will result for your phone to fail,cause all this are made to protect all those that they include
other solution
For users that are EXPERIMENTAL ONLY! you can try this
Follow all the steps in post #1 but when you reach to the cpu chipset,use a heat gun for about 30 second with distance up to 10cm(maybe more).Do whatever is needed to be sure that heat will not touch the other chipsets. This solution have 40-60% Success- Failure. In case of failure, (I DONT HAVE RESPONSIBILITY!) the phone will be dead for ever. If you have free time and this phone for test then do it otherwise better not
Also i will try to find an HTC Desire to take screenshots ...
pacattosul said:
I did this last night, and same result... the phone keep restarting... its 100% a overheat problem cause here are +2°C and when i operate the phone outside , is working without any problem, but when im in the house at +25 the phone start acting weird...(restarting)...
Click to expand...
Click to collapse
I can confirm this. With environmental temperatures below +18°C my phone works perfectly.
Mine's never had a overheat problem.... Anyway, thanks if it ever becomes a problem for me.
Swyped from my P3110 running SlimKat from the XDA Premium HD app!
Hello i would like if someone can guide me what should i do my HTC one x screen cracked 2 months ago .. i brought it were i purchasd the it .. i paid for the new screen but it took a lots of time to get the new screen .... so i brought it somewhere else where i could the Screen with touch panel,so i may use the phone quickly...they test the new screen but they said that it show blank screen :/ and they say it maybe a motherboard issues what should i do? is their anyway to fix it ? last time i saw a post on different HTC one x screen :/ i have the international version
virus_boy_18 said:
Hello i would like if someone can guide me what should i do my HTC one x screen cracked 2 months ago .. i brought it were i purchasd the it .. i paid for the new screen but it took a lots of time to get the new screen .... so i brought it somewhere else where i could the Screen with touch panel,so i may use the phone quickly...they test the new screen but they said that it show blank screen :/ and they say it maybe a motherboard issues what should i do? is their anyway to fix it ? last time i saw a post on different HTC one x screen :/ i have the international version
Click to expand...
Click to collapse
Screen repair is a complicated thing on HTC ONE X... I had the same problem, but not with the blank screen, just with different kinds of screen.. So, my advise is, if your motherboard wasn't defective before the screen repair, there are possibilites to be a different screen.. look, there are three screen producers for HTC.. maybe you got the wrong one... try to buy a screen from another HTC ONE X.. it's difficult to find, but the best way to have a original and functional screen! Good luck man..
Regards from BRazil
Rafael Cardoso said:
Screen repair is a complicated thing on HTC ONE X... I had the same problem, but not with the blank screen, just with different kinds of screen.. So, my advise is, if your motherboard wasn't defective before the screen repair, there are possibilites to be a different screen.. look, there are three screen producers for HTC.. maybe you got the wrong one... try to buy a screen from another HTC ONE X.. it's difficult to find, but the best way to have a original and functional screen! Good luck man..
Regards from BRazil
Click to expand...
Click to collapse
how do i know which screen am using ?
virus_boy_18 said:
how do i know which screen am using ?
Click to expand...
Click to collapse
You need to verify the color of your flat.. but, there's an easy way to look for it, without need of disassembly.. I'll search for it..xda has a forum with the explanation..
Regards from Brazil
Rafael Cardoso said:
You need to verify the color of your flat.. but, there's an easy way to look for it, without need of disassembly.. I'll search for it..xda has a forum with the explanation..
Regards from Brazil
Click to expand...
Click to collapse
if you are going to fix it yourself, or a repair shop? look at the lcd flex cable there is numbers on is. just look for the screen that matches with the old one. also, buy the lcd and digitizer as one assembly. good luck
Hi guys!
I have a F180L (converted on a E975), my phone never fell from any distance, or had any kind of impact, BUT...Since I updated to last version o Carbom ROM, I've got a issue on my screen...
There are random touches on my down-left corner of the screen. It's completely random, while the charger is plugged, or not. But it only happens when an app is opened, while in homescreen (even on google now cards) everything is ok...
I've already flashed another rom, the AOKP Android L release 11, the problem still here...I installed a screen tester app, and this corner is not recognizing when I touch.
What can I do? Is there any kind of fix for it?
It's really annoying (mainly while typing)...
Thank you for any help!
I guess its time for a replacement.
Made some research on other forums and found some people with the same problem, but on other devices...On Nexus 4 and Xioami (mostly)...They solved this by replacing the battery...I'll try to do that this week...
But any other tip about can help...
it might be a kernel issue
if u have jolla kernel try changing the kernel first
I have also the ghost touching on my E975.
Tried to do a scan with antivirus with no luck.
For instance it's hard to dial number, because there are ghost touches often.
It's like on tihs video, but I have touches even more often:
http://www.youtube.com/watch?v=EHFtafL-HKc
I'm on stock KitKat 4.4.2 ROM.
Any ideas about the issue?
smoke2 said:
I have also the ghost touching on my E975.
Tried to do a scan with antivirus with no luck.
For instance it's hard to dial number, because there are ghost touches often.
It's like on tihs video, but I have touches even more often:
http://www.youtube.com/watch?v=EHFtafL-HKc
I'm on stock KitKat 4.4.2 ROM.
Any ideas about the issue?
Click to expand...
Click to collapse
I also had this problem and I sent it to service center (Still in warranty period). They replaced my phone touch screen and the problem is solved.
artit said:
I also had this problem and I sent it to service center (Still in warranty period). They replaced my phone touch screen and the problem is solved.
Click to expand...
Click to collapse
Thanks.
It's relatively common issue, hope it will not appear again...
Sorry to resurrect this thread but I seem to have a problem with my screen, not with the ghostly touches but my screen has like one part of it not responsive to touches especially the keyboard. While typing in portrait mode I can't type in the letters x and d and the whole line of the screen above those letters can't respond to my touches. The others are OK though. Anyone else having the same problem or is it just me? Already flashed different ROMs but same problem
So...I didn't manage to get a new battery to perform a test yet...Maybe I'll do that until the end of this week, and post the results here...
About the kernel...Mine is "3.4.0 [email protected]" ...
Going to update to new Kevin's L ROM and see what will happen...Hope I can help u, guys...
I had the same problem as well, unfortunately my phone was just out of the warranty period so I couldn't get a repair or replacement. I tried everything to do with the software and firmware at first to see if that was the issue(no luck). I noticed when my phone was either hot from heavy usage or charging, it was at its worst..couldn't even put my lock pattern in without it spazzing out. After almost throwing my phone at a wall numerous times I decided to get a new digitizer (easily bought online at reasonable prices). Watched a tutorial on Youtube and replaced it successfully and haven't had a problem since.
kayotic321 said:
I had the same problem as well, unfortunately my phone was just out of the warranty period so I couldn't get a repair or replacement. I tried everything to do with the software and firmware at first to see if that was the issue(no luck). I noticed when my phone was either hot from heavy usage or charging, it was at its worst..couldn't even put my lock pattern in without it spazzing out. After almost throwing my phone at a wall numerous times I decided to get a new digitizer (easily bought online at reasonable prices). Watched a tutorial on Youtube and replaced it successfully and haven't had a problem since.
Click to expand...
Click to collapse
That's exactly the SAME situation the occurred today, almost threw at a wall...when data is on heavy usage, it gets worse...I'll try this, but I seriously thinking about to get a new Moto G...'cause this digitizer gonna take a long time to arrive at my country
Thanks for ur information, dude!
So tried the touchscreen test and found out it was like a whole strip of screen that got affected. It was okay just a few days ago though,
dashcsn said:
That's exactly the SAME situation the occurred today, almost threw at a wall...when data is on heavy usage, it gets worse...I'll try this, but I seriously thinking about to get a new Moto G...'cause this digitizer gonna take a long time to arrive at my country
Thanks for ur information, dude!
Click to expand...
Click to collapse
Yeah no problem and thats unlucky. I've got the Korean variant and wasn't ready to wait weeks to get my new digitizer either from Asia. I managed to find a european version that arrived next day and included front housing aswell (although modifications were needed a bit for the internals to fit). Yeah the Moto G look great but it seems to be more of a downgrade from your current handset right?
Sent from my LG-F180L using XDA Premium mobile app
kayotic321 said:
Yeah no problem and thats unlucky. I've got the Korean variant and wasn't ready to wait weeks to get my new digitizer either from Asia. I managed to find a european version that arrived next day and included front housing aswell (although modifications were needed a bit for the internals to fit). Yeah the Moto G look great but it seems to be more of a downgrade from your current handset right?
Sent from my LG-F180L using XDA Premium mobile app
Click to expand...
Click to collapse
Where did you get the eu one? My screen has been like that for a long while, I have learned to live with it, but would love to change it.
thanks
hh0829 said:
Where did you get the eu one? My screen has been like that for a long while, I have learned to live with it, but would love to change it.
thanks
Click to expand...
Click to collapse
I live in the UK I managed to find one here on ebay. I know you can get some from Italy , Spain and I'm positive there some in US aswell. Search "E975 housing or digitizer" depending on what your after. Do be careful as some replacements screens lack the LG logo or a bad quality. Im would give direct link but im not sure about the forum rules on that are. If your still unsure do PM me your country and I'll PM you back an appropriate link.
Hope I helped.
Sent from my LG-F180L using XDA Premium mobile app