Develop Bugs

How to get 2e recovery

he guys well i was going to install darky's rom until i saw that u needed 2erecovery if ur on froyo witch i am. iv heard about odin but u need the three button combo which i dont!!! sooo i need to know how to get 2erecovery
Sent from my GT-I9000 using XDA App

TheKoomba2010 said:
he guys well i was going to install darky's rom until i saw that u needed 2erecovery if ur on froyo witch i am. iv heard about odin but u need the three button combo which i dont!!! sooo i need to know how to get 2erecovery
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
just get 3btn combo working! it is easy...then
flash cf-root or hardcore's kernel with odin.....

http://forum.xda-developers.com/showthread.php?t=788108
Instructions (long)
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached CF-Root-JPx-vX.X.zip
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select CF-Root-JPx-vX.X.tar
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot
- Done (if it took you more than 30 seconds, you need practise!)

If you are on a JPx FW then all i did was flash the speedmod kernel via odin which has CWM recovery and 2e on it.
Place Darkyy's rom on your SD card
Boot into recovery and install the Darkyy zip.
The entire process should take about 10 minutes.

TheKoomba2010 said:
he guys well i was going to install darky's rom until i saw that u needed 2erecovery if ur on froyo witch i am. iv heard about odin but u need the three button combo which i dont!!! sooo i need to know how to get 2erecovery
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hi TheKoomba2010;10993474. Unrar the attachment below and use root explorer to copy the recovery from the file to system/bin. Make sure you backup the recovery from the system first (just in case). Then copy all the content in the xbin from the file and paste in the system/xbin and reboot. Good luck.

Thanks angiogram! it worked. Now I have 2e recovery.

angiogram said:
Hi TheKoomba2010;10993474. Unrar the attachment below and use root explorer to copy the recovery from the file to system/bin. Make sure you backup the recovery from the system first (just in case). Then copy all the content in the xbin from the file and paste in the system/xbin and reboot. Good luck.
Click to expand...
Click to collapse
Wow, does this really work???
I have been looking something simple to enable 2e recovery, but all I could find was flashing kernel methods.

am i supposed to delete the contents of the xbin folder? phone didnt boot into recovery mode after following steps just stuck on Galaxys GT-I9000 screen

help with cwm6 needed before flashing cm9

hi all....total Android noob here...
after a lot of research and some 'should i or shouldn't i' episodes, i've successfully rooted my wonder in order to flash to cm9. along the way i've discovered that it is 'desirable' to have cwm 6 installed first.
from what i understand, there are 2(?) ways of doing this...either via stock recovery in the ADB(?) shell or via ODIN...
ODIN *seems* to be the preferred method though. but here lies my problem.....i can't get it to work...i've found several links to download odin, and several links to download cwm 6.....also several different sets of instructions as to how to actually do it.....
it would really help if i had one set of downloads for odin and cwm 6 and one set of step by step, clear, precise, tried and tested instructions....
i've also tried nandroid backup as a 'partial' alternative to cwm 6, but it's not compatible with my phone.
additional info (if needed).....
os version - gingerbread 2.3.5
carrier - 3UK
kernel version - 2.6.35.7-perf-I8150XXK18-CL604835
[email protected] #3
many thanks in advance.....
Keith

Here is the way to flash CWM6 using Odin, if you wanna flash CWM5 just use the md5&ops files for CWM5, which you may need to find them somewhere
1. Download Odin & Ancora.ops & recovery-clockwork-6.0.1.2-ancora.tar.md5
2. Enable USB Debugging in Setting-Application- Development
3. Open Odin.
- Select the ops file, and enable one package in options
- then load the md5(recovery-clockwork-6.0.1.2-ancora.tar.md5) file with the One Package button.
- put ur phone it into download mode, first turn off phone, then hold Volume Down + Home + Power Button for a while.
- Phone will turn on and show some screen, then you plug in usb cable (it may look for the driver through Windows Update so please enable your computer's Internet connection).
Get the files (please find Odin from somewhere else): http://forum.xda-developers.com/showthread.php?t=1446593
Good luck and sorry for my bad English~

THESE STEPS NEEDS ROOT & BUSYBOX, DOESN'T NEED PC & ODIN..
FOR BEST RESULT, UPDATE YOUR SUPERUSER.APK, SU BINARY, AND BUSYBOX
-go here http://www.mediafire.com/?6wkwiko5gmqhuyr link by acro68 the author of W's CM9 and who made CWM possible to our device
-download and extract it..
-put the recovery.img in /mnt/sdcard
-download "Terminal Emulator" by Jack in market (FREE OF COURSE)
-open it then type "su" and click enter
-allow root access..
-then type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13" then click enter <~ THAT IS "0" (ZERO) not "O" word..
-then some text will show in bottom
-exit terminal.. check the recovery by turning off the device then turn on with volume up botton, home button, and power button pressed together.. until "Galaxy W" screen shows up, release the power button only.. then you will enter CWM
-navigate with up (up) n down (down) vol button and home keys (select) and power (back) and click "reboot system now" to reboot
HAPPY FLASHING
*I'm not responsible if your phone bricked*

thank you both for your responses....greatly appreciated....
i thought i'd try IvanKurnia's method first as i thought it looked the easiest
it worked first time i'm happy to report........
i can finally feel a dose of CM9 goodness coming on.....yaay..lol

keithross39 said:
thank you both for your responses....greatly appreciated....
i thought i'd try IvanKurnia's method first as i thought it looked the easiest
it worked first time i'm happy to report........
i can finally feel a dose of CM9 goodness coming on.....yaay..lol
Click to expand...
Click to collapse
You are always welcome...Glad to hear that...Good luck to your CM9 ^^ Now we got more choices of CM9 since quite a number of people had ported AOKP and some other builds to it

MyDeSTiNaTe said:
2. Open Odin.
- Select the ops file, and enable one package in options
- then load the md5(recovery-clockwork-6.0.1.2-ancora.tar.md5) file with the One Package button.
- put ur phone it into download mode, first turn off phone, then hold Volume Down + Home + Power Button for a while.
- Phone will turn on and show some screen, then you plug in usb cable (it may look for the driver through Windows Update so please enable your computer's Internet connection)
Click to expand...
Click to collapse
did you forget to add -enable the "USB Debugging" on Setting-?
if you're gonna flashing stock rom with ODIN, you're not gonna need USB Debugging setting..
but if recovery, you need it..

IvanKurnia said:
did you forget to add -enable the "USB Debugging" on Setting-?
if you're gonna flashing stock rom with ODIN, you're not gonna need USB Debugging setting..
but if recovery, you need it..
Click to expand...
Click to collapse
Oh yea, thanks for reminding, I always enabled it so I forgot to mention that

Hi,
how can I know if CWM6 is compatible with my kernel?
Thanks a lot.
Model code: GT-I8150
Android version: 2.3.6
Version base band: I8150XXKL3
Kernel version: [email protected] #3
Build version: GINGERBREAD.XXLA2

as far as I know, recovery has it's own kernel..

Hi all...installed CM9 last night...all went well....
Have noticed that there's no Task Manager or Media Player Apps....is it just that I'm looking right at them and not recognizing them for what they are, or are they not included in the build?....if they're not included, which 3rd party apps would you recommend for use instead?.....
Also, for information, I had ONE minor glitch occurrence when using the camera.....as follows...
Started camera app..
Changed from primary to secondary (self portrait) camera...
Changed the exposure setting to +2....
App force closed.....
Apart from that, no other issues to report.....
A big thanks to everybody involved for taking the Galaxy W and producing such a fantastic alternative to 'stock'.....
PS......will cm10 be ported to the W?....lol...(got the Modding bug now . )
Sent from my GT-I8150 using xda app-developers app

Hi again....can confirm that the force close camera issue (as described above), is a continuing problem on all increments of exposure compensation setting. With that in mind, is there a 3rd party camera app available that has the same functionality as the installed app but without the gimmicks?......
As mentioned before, CM9 really is a welcome step up from the 'stock' OS, so if the camera issue is the only issue with CM9, it's still worth 'taking that leap'.....
Once again, many thanks for the work put in on this....Keith
Sent from my GT-I8150 with CM9 using xda app-developers app

better you post that on "CyanogenMod 9 bug report & discussion thread" by THE-E.. so then the bug will added to the list
CM9 very good right if there weren't any bugs..

IvanKurnia said:
THESE STEPS NEEDS ROOT & BUSYBOX, DOESN'T NEED PC & ODIN..
FOR BEST RESULT, UPDATE YOUR SUPERUSER.APK, SU BINARY, AND BUSYBOX
-go here http://www.mediafire.com/?6wkwiko5gmqhuyr link by acro68 the author of W's CM9 and who made CWM possible to our device
-download and extract it..
-put the recovery.img in /mnt/sdcard
-download "Terminal Emulator" by Jack in market (FREE OF COURSE)
-open it then type "su" and click enter
-allow root access..
-then type "dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13" then click enter <~ THAT IS "0" (ZERO) not "O" word..
-then some text will show in bottom
-exit terminal.. check the recovery by turning off the device then turn on with volume up botton, home button, and power button pressed together.. until "Galaxy W" screen shows up, release the power button only.. then you will enter CWM
-navigate with up (up) n down (down) vol button and home keys (select) and power (back) and click "reboot system now" to reboot
HAPPY FLASHING
*I'm not responsible if your phone bricked*
Click to expand...
Click to collapse
It worked great, thanks a lot!
I would just suggest to add the following step BEFORE flashing CWM6, in order to have a backup of the existing recovery image:
dd if=/dev/block/mmcblk0p13 of=/sdcard/mybackup.img

[.::MDT::.] said:
It worked great, thanks a lot!
I would just suggest to add the following step BEFORE flashing CWM6, in order to have a backup of the existing recovery image:
dd if=/dev/block/mmcblk0p13 of=/sdcard/mybackup.img
Click to expand...
Click to collapse
yes.. add it.. don't forget to access root first by typing "su"

IvanKurnia said:
yes.. add it.. don't forget to access root first by typing "su"
Click to expand...
Click to collapse
Actually it worked for me even without typing "su" before...

[.::MDT::.] said:
Actually it worked for me even without typing "su" before...
Click to expand...
Click to collapse
what?! without typing "su" you will not be able to access root..
eh, did you have your USB Debugging enabled? maybe because of it..

Moving CWM6 backups to PC
Hi guys, I have a question here. How can I move my backups I created using CWM6 to a PC so I can free up my internal sd space? I don't think those folders on clockworkmod\backup are full backups because the blob folder is much larger.
I'm using Samsung Galaxy W I8150, CWM 6.0.1.2, CM9 Alpha7.

buruguduy said:
Hi guys, I have a question here. How can I move my backups I created using CWM6 to a PC so I can free up my internal sd space? I don't think those folders on clockworkmod\backup are full backups because the blob folder is much larger.
I'm using Samsung Galaxy W I8150, CWM 6.0.1.2, CM9 Alpha7.
Click to expand...
Click to collapse
just copy or cut the "clockworkmod" folder, to prevent file corrupt, rar or zip it.. if want to restore, copy or cut back to your SD..
safe backup

IvanKurnia said:
just copy or cut the "clockworkmod" folder, to prevent file corrupt, rar or zip it.. if want to restore, copy or cut back to your SD..
safe backup
Click to expand...
Click to collapse
did you already tried it? if i cut it manually from my phone, is there a risk CWM would be corrupted? sorry noob here..

buruguduy said:
did you already tried it? if i cut it manually from my phone, is there a risk CWM would be corrupted? sorry noob here..
Click to expand...
Click to collapse
have already and safe.. BUT:
-make sure your USB Cable is still in good condition.. if you are not sure, DO NOT MOVE CABLE WHILE COPYING FILES..
-you had fast enough PC.. DO NOT COPY FILES WHILE LAGGING
-NO VIRUS ON YOUR PC..
-make sure NO SOFTWARE BLOCKING YOUR PHONE DRIVER..
-if you backup to external sd, BETTER USE CARD READER TO COPY THOSE FILES TO PC
-IF ZIPPING OR RARING FILES, DP NOT COMPRESS LIKE CRAZY (COMPRESS NORMAL OR JUST STORE -without compression-)
-always reject/unmount removeable drive TO PREVENT CORRUPT FILES ON YOUR SD, USB, OR ETC..
safe backup

[Recovery] CWM Recovery v5.5.0.4 (Fixed) For Micromax A90

How to install clockworkmod recovery:
Edit: Fixed install zip from sdcard bug
Method 1: Needs root
The first method is preferable for those who have root access on their Micromax A90. Those who do not have a rooted device should follow Method 2 instead.
1. Download cwmr_v5.5.0.4 (fixed).zip and unzip/extract it. After extracting move both the files to the root directory of your SD card.
2. Install mu7577.apk and run it. After that give the program root permissions if asked and tap Recovery Update.
3. Select recovery.img from SD card then tap the ok button.
4. Now you can reboot to recovery.
Congrats!
Method 2: SP Flash Tool method, root not required
1. Download MTK6575 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download cwmr_v5.5.0.4 (fixed) + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted cwmr_v5.5.0.4 (fixed) + scatter folder and select MT6575_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (without battery inserted) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.

dear brother are you tested it ! please post some screenshot here with A90.

BHARDIK said:
dear brother are you tested it ! please post some screenshot here with A90.
Click to expand...
Click to collapse
Yes bro I have tested it!
I will post the screenshots soon

please also post here STOCK ROM full firmware , because if we failed then we need to restore i try custom recovery maybe 10 times always failed then need to go service center for restore. if you add stock firmware then we no need to worry about any experiment.

Presently I also don't have the stock rom or stock dump of micromax a90, I am currently running a self modded rom.
Follow this guide http://forum.xda-developers.com/showthread.php?t=1981107 to make a dump/backup of rom
Sent from my A90 using xda app-developers app

i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?

BHARDIK said:
i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?
Click to expand...
Click to collapse
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app

THANX
The guide is great....CMW installed in minutes...thanx a lot...waiting for custom rom

airjordanthehacker said:
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?

BHARDIK said:
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?
Click to expand...
Click to collapse
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app

hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !

Is there any Jellybean custom ROM for the A90?

No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!

BHARDIK said:
hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !
Click to expand...
Click to collapse
thanks!

BHARDIK said:
No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!
Click to expand...
Click to collapse
Has anyone tried flashing ROMs of similar devices like Karbonn A18?
Sent from my Galaxy Nexus using Tapatalk 2

provide URL please
Please provide URL Please?

Micromax Stock Rom & Flasher site FTP or otherwise please!
Can anyone post or tell me where I can get Micromax Stock Rom & Flasher from their site or otherwise please? I'd like to reflash to stock state instead of just removing CWM.

airjordanthehacker said:
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
Hi, it woks with NGM Legend ? (mtk 6575 phone)

Still no sign of any custom ROM?
Anyway, which device has a similar config as the A90. I'll try flashing it's custom ROM.

Custom Rom ICS 4.0.6
Dear All,
See my thread here for Custom Rom
My mobile is - NXG Phablet.
Its specifications match to A90.
Check - ics 4.0.6 custom rom in my thread and download.
but use your A90 ics 'boot.img'.. means, replace your 'boot.img' in the downloaded file and rezip and flash through CWM recovery.
after boot it will come in Russian language. (because it is for Star N8000 - russian forum). so change language to english in settings. also , default launcher is SPB shell - Russian version. so install another launcher and use.
Rom is very good.
check here in CUSTOM ICS area.
http://forum.xda-developers.com/showthread.php?p=32932373
Happy Testing.

Remove Bloatware from you pc Via Moborobo **requires root**

*******This way of uninstalling bloatware has been tested only on Samsung Galaxy S3 Stock Rooted firmware. I am not responsible for any damaged devices!!!!!!!!!!!!!!!!!*********
**Read all the threat please**
1. Root your phone (in case you haven't http://forum.xda-developers.com/showthread.php?t=1957273 )
2. Download the Moborobo software and install it http://www.moborobo.com/
3. Disable kies
4. Connect your phone with your pc and start Moborobo
5. Enable USB debugging in the Developers options of your phone (Settings->Developer Options->USB debugging)
6. Follow the instraction in the program to connect your phone with Moborobo.
7. Once you have done with that go to apps on Moborobo and then go to System Apps
8. There you will se all the apps that are installed on the phone except the apps that you have installed.
9. Check the apps that ypu want to uninstall (Please follow this guide for the apps safe to remove https://docs.google.com/spreadsheet/ccc?key=0AqTvctlW89DtdC1qVUlLeVFTV3ZOdUtDclpBdVRQOUE&pli=1#gid=0 )
10. At the begining if your phone asks to give administration access to moborobo click yes and make sure that is always yes.
11. Once the uninstaling of the apps has finished reboot you phone.
12. Now all the apps that you do not want to your phone has gone.
**If you want to uninstall the apps that you have installed follow step 7 but go to User Apps.
***If you want all these apps back and return to complete stock***
Follow the link in step 1 to reset the flash counter.
Make a back up of your contacts , photos, etc just in case.
Download the correct firmware of your device and flash it via ODIN.
This will unroot your phone, custom recovery will be replaced with the stock one and all your mods will return to stock.
After that wait for phone to restart.
If you get into Bootloop just press Vol UP + home + power at the same time until Samsung Galaxy SIII logo appears.
Make a full wipe data/ Factory reset and restart your phone.
Hit Thanks if did a good work

It seems a bit complicated..
You can do the same without pc with a simple file manager by erasing the apk in /system/app, or using titanium...

Striatum_bdr said:
It seems a bit complicated..
You can do the same without pc with a simple file manager by erasing the apk in /system/app, or using titanium...
Click to expand...
Click to collapse
That's true but there are people who afraid to erase an apk feom the directory.

jprentzas said:
That's true but there are people who afraid to erase an apk feom the directory.
Click to expand...
Click to collapse
Then they should freeze them with titanium backup. There is literally 0 benefit of removing them. You can't reclaim space. At least with titanium you can defrost the frozen apps if some done wrong.
Sent from my GT-I9300 using Tapatalk 2

rootSU said:
Then they should freeze them with titanium backup. There is literally 0 benefit of removing them. You can't reclaim space. At least with titanium you can defrost the frozen apps if some done wrong.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Ok then. You are right. I will remove the threat then. Thank you!!

jprentzas said:
Ok then. You are right. I will remove the threat then. Thank you!!
Click to expand...
Click to collapse
maybe you should've made a post about some useful moborobo features than this

[Tutorial][GUIDE][HOW TO][ROOT][STOCK][ROM] Everything Galaxy Y GT S5360T & Arabic

[Tutorial][GUIDE][HOW TO][ROOT][STOCK][ROM] Everything Galaxy Y GT S5360T & Arabic
Basically this thread is for all Galaxy Y (Galaxy Young) GT-S5360T, i needed to do a lot with this mobile, so I am sharing it all here;
Flash Arabic Stock ROM to AU/NZ Galaxy Y GT-S5360T Devices
This device is only intended for AU, NZ & Israel so only the Israeli ROM comes with Arabic.
You can't use Odin with SamMobile.com Firmware, you need an Odin flashable ROM.
Thanks to Doky73 for his S5360 Flashable Firmware Packages.
You can use any one of ROMs intended for S5360, that will work fine with no problem at all, but only three titled Arabic
But if you are like me, needs everything to be perfect and wanna see your correct model name on boat screen download the Israeli ROM Doky converted to Odin for me from here
https://hotfile.com/dl/228117046/fb0ea97/S5360T_JKLC2_PCLLC1_JJLC1_wipe_by_SplitFUS2.zip.html and unzip it, to get three .tar.md5 files.
note that this will WIPE your data
And download Odin 3.07
If you don't have Samsung Kies installed on PC, then you must download & install Samsung USB Driver or Softpedia
Backup all your data since this is a WIPE ROM that will erase all your data, so you can restore them later, copy images & music and use Super Backup for Contacts & SMS
Make sure you batter is at least 75%
1 - Shutdown your device
2 - Boot your mobile in download mode by pressing all together Volume Down + Home + Power Buttons
once you see the Yellow warning screen, release the buttons
3 - Select continue by pressing Volume Up
4 - Now you see "Downloading" line below the android logo, connect your mobile to PC
If you have any other device connected to any COM port, please disconnect
5 - Open Odin & wait till it reads your mobile, then you will see any of the ID:COM boxes highlighted in Yellow or Pink for newer Odin versions
6 - Now this is Important, ONLY check the Auto Reboot and F. Reset Time, uncheck any other box
7 - Files:
in PDA section: browse for the PDA file (in this case: PDA_S5360T_JKLC2.tar.md5)
it will take few seconds to confirm integrity of the file
in Phone section: browse for the Modem file (in this case MODEM_S5360T_JJLC1.tar.md5)
in CSC section: browse for the CSC file (in this case CSC_S5360T_PCLLC1.tar.md5)
NO pit file/No bootloader
8 - Click Start, wait for Odin to give you green light "PASS" and phone restarts
9 - When phone shows home screen, disconnect from PC & setup your device
10 - Congratulations
Root your Galaxy Y GT-S5360T
Using Universal GingerBread ROOT the only worked fro me with S5360T ROM
Make sure you batter is at least 75%
1 - Download Universal_GingerBread_ROOT_v8 from
http://www.4shared.com/zip/oZK3JRkf/Universal_GingerBread_ROOT_v8.html
OR
https://docs.google.com/file/d/0B1N4S4lFfOgUM21PNDhJMVU5TEE/edit?pli=1
And press Ctrl+S to download file
2 - Copy the file to your SD Card's root folder (put it outside every folder)
3 - Shutdown your device
4 - Boot your mobile in Recovery mode by pressing all together Volume Up + Home + Power Buttons
5 - Go to "update from SD card" with Volume buttons to move up & down, and hot Ok with home button
6 - Locate ZIP file and choose it with Home button
7 - Follow on screen instructions
8- IF asked to add SUser, press OK
9 - When you see successfully rooted your phone, Choose Reboot/Restart
10 - To confirm ROOTing, install Root Checker
Remove System Apps from Galaxy Y GT-S5360T
To reduce space, memory, and remove apps like Yahoo Finance & Jewish Calendar - in case you installed Israeli ROM
Install Link2SD from Play Store, it needs Root, so if not rooted, go to above Step.
Once Installed, open it, Super User will ask to grant root access, press Yes & remeber
To reduce space/or having applications so slow
Choose the application, go to actions, clear cache
You can also clear Data, but that will delete all user data like in Facebook, it will remove your logins, in Gmail will remove your Synced emails.
To remove app:
Choose any application, Go to Actions, Clear Data then open actions again to uninstall.
What else would you like to do with your Phone?

There is an iraqi rom
sent from my UNLOCKED gt-s5360 using the XDA app

Titanium Backup is better than Link2SD in removing system app.
Sent from my little beast using xda-app

Well, I use ROM TOOL BOX; it is much better than any root app. Its an All-in-one app.

yousef8824 said:
There is an iraqi rom
sent from my UNLOCKED gt-s5360 using the XDA app
Click to expand...
Click to collapse
Can you plz provide a link to this ? I only found those on SamFirmware!

luqman98 said:
Titanium Backup is better than Link2SD in removing system app.
Sent from my little beast using xda-app
Click to expand...
Click to collapse
I adore TBU, and I am using the PRO version myself, but Link2SD is smaller, lighter, simpler for beginners. That's why I install for my friends who wants to remove system apps

MRiddleR said:
Flash Arabic Stock ROM to AU/NZ Galaxy Y GT-S5360T Devices
Click to expand...
Click to collapse
Fantastic!!! Thank you thank you thank you.
I bricked my TNZ Galaxy y gt5360t (New Zealand), and after some fiddling, this ROM got it all up and running again!!!:good:
I had used the UK rom from another post but the phone wouldn't find the sim after I loaded it, where as this one finally works; I have sim and 3g up and running again!!! :laugh:
Now to try and redo deleting bloat ware with out messing anything up........... thanks to the guys who run this forum too if you ever come across this post. Stoked!

Can you please tell me procedure to update gt-s5360(india) ??
Sent from my GT-S5360 using xda app-developers app

bhojraj said:
Can you please tell me procedure to update gt-s5360(india) ??
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
check if you can find a proper firmware @ samfirmware.com first, I can't find one for India.