Related
Is there a little more specific brake down of the rooting process (Laymen or lame man). How to place on the root sd drive and when I tried to open zip files, i was told they were invalid. I got them from this site.
http://forum.xda-developers.com/showthread.php?t=705113
helpful links
thanks for the help but the first link doesn't work
Which link? They work fine for me.
I got as far as step 23 in the 30 step process from XNeckFaceX but I don't see a option for select the USB-MS toggle, just the 6 wipe options. Should I have loaded the new rom flash first. I can't even power down or get out of the wipe menu. I am afraid if I remove the batt I could not reboot. What to do?
ADB FOR BEGINNERS, the rest are fine
Rockmeal said:
I got as far as step 23 in the 30 step process from XNeckFaceX but I don't see a option for select the USB-MS toggle, just the 6 wipe options. Should I have loaded the new rom flash first. I can't even power down or get out of the wipe menu. I am afraid if I remove the batt I could not reboot. What to do?
Click to expand...
Click to collapse
Hopefully by now you got through everything ok. If you are using Amon_Ra recovery, USB MS is on the main menu. Press both VolUP+DWN at the same time to go up a menu.
Rockmeal said:
ADB FOR BEGINNERS, the rest are fine
Click to expand...
Click to collapse
Sorry, I didn't know you were referring to my Sig. It's fixed now.
Try Simple Root Guide
Rockmeal said:
Is there a little more specific brake down of the rooting process (Laymen or lame man). How to place on the root sd drive and when I tried to open zip files, i was told they were invalid. I got them from this site.
Click to expand...
Click to collapse
It doesn't get any easier than the Simple Root Guide. Try that one if you have trouble with any others.
All you do is download one zip file and run the EXE (making sure you have .NET framework and HTC sync installed first), click each button for each step. And done.
webs05 said:
It doesn't get any easier than the Simple Root Guide. Try that one if you have trouble with any others.
All you do is download one zip file and run the EXE (making sure you have .NET framework and HTC sync installed first), click each button for each step. And done.
Click to expand...
Click to collapse
I did this method and it looks like it's fine but I can't use wireless tether. I get a message saying my phone is in an unknown state and to reboot (which of couse I did) but the problem persists.
gapoochi said:
I did this method and it looks like it's fine but I can't use wireless tether. I get a message saying my phone is in an unknown state and to reboot (which of couse I did) but the problem persists.
Click to expand...
Click to collapse
This usually means you need to enable USB debugging, step 2 didn't work, or you need to flash a custom ROM. To test root type "su" in a terminal. You should get "#" back. If you get that try enabling USB debugging or flashing a custom ROM. If you don't get that flash a custom ROM.
This is a guide for noobs
First things first, ask yourself am I using a T-Mobile Note II SGH-t889?
If you are not, stop now.
Now if your phone blows up, fires nuclear missiles, activates sky net, or becomes a nice pretty paperweight, I am not responsible. You are using this guide at your own risk.
That being said I have provided the exact methods I used to do this on me device and it works perfectly.
OK let’s begin.
First plug your phone into your computer.
-If you are getting an error message about a connection you must have windows xp SP3 or higher (vista, windows 7)
-you must also have the Samsung mobile phone drivers available here http://forum.xda-developers.com/showthread.php?t=961956
-you must also have windows media player 11 available on the Microsoft website.
Now that you have all this you should be able to explore the files on your phone, it will be under mobile devices.
Now on your desktop let’s make a new folder called System Folder, and in that Folder make two folders, one called ROM and one called KERNEL.
Now back on the desktop let’s make another folder called ODIN
SYSTEM FOLDER
-ROM
-KERNEL
ODIN
Let’s go over to the T-mobile note II XDA forum page http://forum.xda-developers.com/forumdisplay.php?f=1877
Now we’re going to go to the section called ORIGINAL ANDROID DEVELOPMENT
Download the KERNEL "peruses". http://forum.xda-developers.com/showthread.php?t=1960935
Download the one that says Perseus-alpha27.4-T889-CWM.zip (though the version number may change)
Put that file in the KERNEL folder (DO NOT UNZIP IT)
Download cwm6-recovery-n7100-121014.tar : http://www.mediafire.com/?mouxvj4og7azcow CWM md5: 67208cd19e82478af8591a83ca0a39b2 (the md5 is used to check your download, make sure you have no errors)
Put this file in the ODIN folder
Download CWM SUPERSU installable ZIP: http://www.mediafire.com/?w3i20sr6r58r8ah (put this in System Folder, DO NOT UNZIP)
SU md5 : 010b98d757544d7b2971574951c1d5e6
Download PC Odin: http://d-h.st/6Er put this into the Odin folder and unzip this one
Download Xquizit rom http://forum.xda-developers.com/showthread.php?t=1960950
Download the xquizit rom kitchen too.
Put these in the ROM folder, (DO NOT UNZIP)
This rom is straight forward, once you get the hang of flashing try other ROMs.
Now copy the System Folder to your phones external SD card.
Now open Odin and select the pda button and select the cwm6-recovery-n7100-121014.tar file in the Odin folder on desktop
Now switch off device and reboot in download mode by:
Press Vol down + Home +Power, and then, press Volume UP button in Warning Page to enter the Download Mode
Connect device to PC and wait till device successfully added to com port (it will turn light blue)
Hit ‘Start’ to flash
Once it flashed successfully, you can see 'PASS' in table above the ID: COM, you can disconnect device from PC
Now reboot into CWM by: Switch off device and press Vol Up + Home +Power hold about 5 second
Install SuperSu by selecting install zip from SD card, then select install zip from external SD card, then navigate to system folder and install the superuser.zip that is there.
Reboot.
Download Triangle Away from the play store or from http://forum.xda-developers.com/showthread.php?t=1494114
Run this and it will reset your flash counter to 0.
You have now achieved root.
Install titanium backup, and backup all of your user apps+data (USER APPS ONLY or just reinstall them all from the play store) (you can do this one by one or in a batch in the third tab if you have the paid version. (DO NOT BACKUP RED NAMED FILES, ONLY WHITE)
Download APN backup and restore from the play market
Open it, you will get an error, dismiss it and press the back button
Open titanium and find APN backup and restore, long press it and select to make it a system app.
Press home.
Open APN B&R. and dismiss the error, this time hit menu and disable the ICS check. Then press back and reopen it, NO ERROR
Now backup your APN settings.
Switch off device and press Vol Up + Home +Power hold about 5 second to go back into recovery
Go to the backup/restore section, and backup your current rom (do not skip this, we are about to erase your phone and if something goes wrong and you do not have this, pretty paperweight)
Now go back to the main menu
Wipe data and factory reset 3 times over, wipe cache 3 times over, now go to advanced and wipe dalvik cache 3 times over
now go back to the install zip from sd card menu and select the external sd card, navigate to system folder, and then Rom, then install the xqizit rom.zip file it will open aroma installer, it will give you options of what you want to do, you do not need to re wipe, install typical or custom to choose what apps you want, (svoice is removed unless you add it back under custom) then you want to install the 15 toggle mod.
Now once that is done, reboot the device, wait 10 minutes.
Now open the play store and update superuser
Download apn backup and backup the new tmobile apn with the wifi fix and titanium backup and restore your apps
You are now rooted and on a custom rom with multi window support. Hold down the back button to activate multi window.
Reboot into recovery
Install the perseas kernel zip from the kernel folder
Reboot the phone
Wait for the home screen
Reboot for good measure
You will want to put triangle away back on your device and run it again
You can download CPU control apps and over clock and under clock ECT.
You can change your boot animations; see my post under themes n apps for that.
Have fun and enjoy
Special thank to Dr.Ketan , Chainfire , Chenlu, simplelife, wild child, and any others I have forgotten to mention
Well I would say this needs a sticky...
But since we cant get anything stickied for no reason at all. It will just wander off into the forgotten realm of the tmobile note 2 forums in the dark cold depths of xda where no one cares to do anything to help organize this forum.
Not only do we have worthless posts repeated day after day to no end, and the same question asked repeatedly by the same user. The foreigners that dont have a clue. And trolling to no end. But a thread that could possibly help someone one day will just die along with 'help I bricked my phone' threads. What a shame...
Someone please sticky this
Sent from my SGH-T889 using Tapatalk 2
This snt fair to let this thread go into oblivion. Mods please sticky this guy actually spemt some time making something useful but you guys wont sticky it. Yet viirus comes on here and bilks money from the community and basically steals doing absolutely nothing to back up his promises and people treat me like crap.
But you guys loved him....this is messed up.
Do something positive for the community.
I was right the first time. Please just listen to me
Sent from my SGH-T889 using Tapatalk 2
Bump for your hard work.
This seems like a great tutorial and guide. The only thing missing might be pictures for the super noobs
I haven't tried this yet but i subbed for future reference
What about backing up the IMIE? Forgive me if it's in there it's just that I am very nervous about that. I am coming from the HTC Sensation and am not familiar with flashing Samsung phones. And from what I am understanding this issue is even new to those that have been flashing Samsung phones in the past
To be honest
I havr never backed up my imei
I only use sammy
I have never had a problem
Ill look into this for you though
Good point, better safe than sorry.
Sent from my SGH-T889 using Tapatalk 2
Thankyou for your kind words.
I made this for one particular person who was a bit afrade of rooting.
As always I share with the world for those who dont think to or are afrade to ask.
Sent from my SGH-T889 using Tapatalk 2
Don't wanna be a hater, but this guide is super drawn out. There is already plenty of guides that explain it much better, A for effort tho.
Yea its long but I mean where are the other guides? This forums a mess and theres no sticky thats what I was talking about
Sent from my GT-N7105 using Tapatalk 2
Thread closed
The stickies you all want regarding root already exist in the Development forum. Everything you need to know is contained in that thread.
[Tutorial][GUIDE][HOW TO][ROOT][STOCK][ROM] Everything Galaxy Y GT S5360T & Arabic
Basically this thread is for all Galaxy Y (Galaxy Young) GT-S5360T, i needed to do a lot with this mobile, so I am sharing it all here;
Flash Arabic Stock ROM to AU/NZ Galaxy Y GT-S5360T Devices
This device is only intended for AU, NZ & Israel so only the Israeli ROM comes with Arabic.
You can't use Odin with SamMobile.com Firmware, you need an Odin flashable ROM.
Thanks to Doky73 for his S5360 Flashable Firmware Packages.
You can use any one of ROMs intended for S5360, that will work fine with no problem at all, but only three titled Arabic
But if you are like me, needs everything to be perfect and wanna see your correct model name on boat screen download the Israeli ROM Doky converted to Odin for me from here
https://hotfile.com/dl/228117046/fb0ea97/S5360T_JKLC2_PCLLC1_JJLC1_wipe_by_SplitFUS2.zip.html and unzip it, to get three .tar.md5 files.
note that this will WIPE your data
And download Odin 3.07
If you don't have Samsung Kies installed on PC, then you must download & install Samsung USB Driver or Softpedia
Backup all your data since this is a WIPE ROM that will erase all your data, so you can restore them later, copy images & music and use Super Backup for Contacts & SMS
Make sure you batter is at least 75%
1 - Shutdown your device
2 - Boot your mobile in download mode by pressing all together Volume Down + Home + Power Buttons
once you see the Yellow warning screen, release the buttons
3 - Select continue by pressing Volume Up
4 - Now you see "Downloading" line below the android logo, connect your mobile to PC
If you have any other device connected to any COM port, please disconnect
5 - Open Odin & wait till it reads your mobile, then you will see any of the ID:COM boxes highlighted in Yellow or Pink for newer Odin versions
6 - Now this is Important, ONLY check the Auto Reboot and F. Reset Time, uncheck any other box
7 - Files:
in PDA section: browse for the PDA file (in this case: PDA_S5360T_JKLC2.tar.md5)
it will take few seconds to confirm integrity of the file
in Phone section: browse for the Modem file (in this case MODEM_S5360T_JJLC1.tar.md5)
in CSC section: browse for the CSC file (in this case CSC_S5360T_PCLLC1.tar.md5)
NO pit file/No bootloader
8 - Click Start, wait for Odin to give you green light "PASS" and phone restarts
9 - When phone shows home screen, disconnect from PC & setup your device
10 - Congratulations
Root your Galaxy Y GT-S5360T
Using Universal GingerBread ROOT the only worked fro me with S5360T ROM
Make sure you batter is at least 75%
1 - Download Universal_GingerBread_ROOT_v8 from
http://www.4shared.com/zip/oZK3JRkf/Universal_GingerBread_ROOT_v8.html
OR
https://docs.google.com/file/d/0B1N4S4lFfOgUM21PNDhJMVU5TEE/edit?pli=1
And press Ctrl+S to download file
2 - Copy the file to your SD Card's root folder (put it outside every folder)
3 - Shutdown your device
4 - Boot your mobile in Recovery mode by pressing all together Volume Up + Home + Power Buttons
5 - Go to "update from SD card" with Volume buttons to move up & down, and hot Ok with home button
6 - Locate ZIP file and choose it with Home button
7 - Follow on screen instructions
8- IF asked to add SUser, press OK
9 - When you see successfully rooted your phone, Choose Reboot/Restart
10 - To confirm ROOTing, install Root Checker
Remove System Apps from Galaxy Y GT-S5360T
To reduce space, memory, and remove apps like Yahoo Finance & Jewish Calendar - in case you installed Israeli ROM
Install Link2SD from Play Store, it needs Root, so if not rooted, go to above Step.
Once Installed, open it, Super User will ask to grant root access, press Yes & remeber
To reduce space/or having applications so slow
Choose the application, go to actions, clear cache
You can also clear Data, but that will delete all user data like in Facebook, it will remove your logins, in Gmail will remove your Synced emails.
To remove app:
Choose any application, Go to Actions, Clear Data then open actions again to uninstall.
What else would you like to do with your Phone?
There is an iraqi rom
sent from my UNLOCKED gt-s5360 using the XDA app
Titanium Backup is better than Link2SD in removing system app.
Sent from my little beast using xda-app
Well, I use ROM TOOL BOX; it is much better than any root app. Its an All-in-one app.
yousef8824 said:
There is an iraqi rom
sent from my UNLOCKED gt-s5360 using the XDA app
Click to expand...
Click to collapse
Can you plz provide a link to this ? I only found those on SamFirmware!
luqman98 said:
Titanium Backup is better than Link2SD in removing system app.
Sent from my little beast using xda-app
Click to expand...
Click to collapse
I adore TBU, and I am using the PRO version myself, but Link2SD is smaller, lighter, simpler for beginners. That's why I install for my friends who wants to remove system apps
MRiddleR said:
Flash Arabic Stock ROM to AU/NZ Galaxy Y GT-S5360T Devices
Click to expand...
Click to collapse
Fantastic!!! Thank you thank you thank you.
I bricked my TNZ Galaxy y gt5360t (New Zealand), and after some fiddling, this ROM got it all up and running again!!!:good:
I had used the UK rom from another post but the phone wouldn't find the sim after I loaded it, where as this one finally works; I have sim and 3g up and running again!!! :laugh:
Now to try and redo deleting bloat ware with out messing anything up........... thanks to the guys who run this forum too if you ever come across this post. Stoked!
Can you please tell me procedure to update gt-s5360(india) ??
Sent from my GT-S5360 using xda app-developers app
bhojraj said:
Can you please tell me procedure to update gt-s5360(india) ??
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
check if you can find a proper firmware @ samfirmware.com first, I can't find one for India.
I DO NOT TAKE CREDIT FOR THE WORK. I ONLY TRANSLATED THE SCRIPTS TO ENGLISH .
I AM NOT RESPONSIBLE IF YOU BRICK OR BREAK YOUR FUJITSU.
I have managed to find a bat file which will allow you to root your F-02E japanese phone.
I have also found a script to allow system R/W made by kikuhare
Steps Involved:
Make sure your phone has 100% charge.
Download the Root + System Mount
Extract the zip's to different folders.
Enable USB debugging under Menu > Settings > Developer Options.
Point to the folder where you extracted drivers from "usb_driver_F-02E_1.0.zip". Wait for drivers to install.
Make sure the phone is connected as PTP not MTP.
CMD into the folder "f-02e_oneclick_su_installer". It is inside the "Root + System Mount_1" files folder.
Run the runme.bat.
Download "Root Checker by joeykrim" from the Play Store.
Run the "Root Checker" app
Wait for the process to finish.
UPDATE System R/W
Connect phone to computer
Download the System Read Write Mounter_1.zip <<<<<< Only need to download if you did not download the "Root + System Mount_1.zip" file.
CMD into the "F-02E_system-mounter" It is inside the "Root + System Mount_1" files folder.
Extract the file and run the"START.bat"
Run everytime the system restarts to mount system as R/W.
Enjoy root .
NOTE: This method does not give full root permissions. You will still be able to underclock the CPU to some degree and use the CoreControl app to disable cores. I will have to run start.bat inside F-02E_system-mounter folder everytime the phone restarts to get system R/W
Drivers: usb_driver_F-02E_1.0.zip
Root Includes System Mount: Root + System Mount_1.zip
System R/W Mounter: System Read Write Mounter_1.zip
Screenshots:
Feel free to ask questions.
anaschillin said:
Hi, I have managed to find a bat file which will allow you to root your F-02E japanese phone. I do NOT take CREDIT for the work. I have merely found the zip. I have tested it and it works. I AM NOT RESPONSIBLE IF YOU BRICK OR BREAK YOUR FUJITSU.
Steps Involved:
Make sure your phone has 100% charge.
Extract the zip's to different folders.
Enable USB debugging under Menu > Settings > Developer Options.
Point to the folder where you extracted drivers from usb_driver_F-02E_1.0.zip. Wait for drivers to install.
CMD into the folder where you extracted the f-02e_oneclick_su_installer.zip files.
Run the runme.bat.
Download RootChecker from the Play Store. https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Reboot the phone.
Run the RootChecker app
Wait for te process to finish.
Enjoy root .
NOTE: This method does not give full root permissions. You will still be able to underclock the CPU to some degree and use the CoreControl app to disable cores.
Drivers:
http://www.4shared.com/zip/kGmw0Suu/usb_driver_F-02E_10.html?
Root: http://www.4shared.com/zip/D90h9kH2/f-02e_oneclick_su_installer.html?
Feel free to ask questions.
Click to expand...
Click to collapse
I havent even got the phone yet but are there any custom roms that work on this phone? Thanks
the-blind-bandit said:
I havent even got the phone yet but are there any custom roms that work on this phone? Thanks
Click to expand...
Click to collapse
No, not enough developers and interest for the phone outside Japan. I doubt anyone will be willing to put in effort as well
Oh well, but it is a very good phone, i think ill still get it though. I just wanted to know is half of it in Chinese even if you select english, i just heard this on youtube about another one of fujitsu's phones?
Sent from my Xperia T
the-blind-bandit said:
Oh well, but it is a very good phone, i think ill still get it though. I just wanted to know is half of it in Chinese even if you select english, i just heard this on youtube about another one of fujitsu's phones?
Sent from my Xperia T
Click to expand...
Click to collapse
Only Docomo and Fujistu apps are in Japanese. Everything else is in English.
Thats fine i suppose with root explorer i can delete those apps by deleting the apk in system app? Also if you have xposed app settings you can change the language per app would that also work?
Sent from my Xperia T
the-blind-bandit said:
Thats fine i suppose with root explorer i can delete those apps by deleting the apk in system app? Also if you have xposed app settings you can change the language per app would that also work?
Sent from my Xperia T
Click to expand...
Click to collapse
I have just frozen them, just incase if the phone needs the at somepoint. Xposed framework doesnt work as it need system R/W and the root method has not allowed system R/W mainly because the phone bootloader not unlocked. Secondly make sure you do not uninstall/disable the Phonebook and Phonebook Service provided by Docomo. Its key to allowing you to add and sync contacts.
So Xposed wont work at all then, thats a shame what about lucky patcher, does that need R/W?
Sent from my Xperia T
Improved the .bat file. Now you will have system R/W
Download the root file again and run it. Follow the steps starting at 10 if you have already rooted. :good:
Thanks
Sent from my Xperia T
anyone else besides the OP got their f02 rooted with this?
I may not be able to help any further. I have boot looped my phone. I cannot get it past the NTT Docomo screen. I think I know what is causing it but I cannot get the phone connected to the PC. I may need to send it into Fujitsu.
Good luck on fixing it
Sent from my Xperia T
I tried the following OP method didnt work for me
Thank! i just got the F-02e today. will try to root it.
btw, have you overcome a heating and self-shutting off prob on this phone?
anaschillin said:
Hi, I have managed to find a bat file which will allow you to root your F-02E japanese phone. I do NOT take CREDIT for the work. I have merely found the zip. I have tested it and it works. I AM NOT RESPONSIBLE IF YOU BRICK OR BREAK YOUR FUJITSU.
Steps Involved:
Make sure your phone has 100% charge.
Extract the zip's to different folders.
Enable USB debugging under Menu > Settings > Developer Options.
Point to the folder where you extracted drivers from usb_driver_F-02E_1.0.zip. Wait for drivers to install.
CMD into the folder where you extracted the f-02e_oneclick_su_installer-improved.zip files.
Run the runme.bat.
Download RootChecker from the Play Store. https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Run the RootChecker app
Wait for the process to finish.
UPDATE
Download ES File Explorer. Run it.
Press Menu then scroll down the list and click Root Explore.
Change the directory to root. (Meaning where you can see all system folders)
Look for system and hold the folder, then press more then properties.
Press Change in permissions.
Tick all the boxes at the bottom.
Enjoy root .
NOTE: This method does not give full root permissions. You will still be able to underclock the CPU to some degree and use the CoreControl app to disable cores. I have not been able to mount system as R/W and I had trouble installing BusyBox.
Drivers: usb_driver_F-02E_1.0.zip
Root: f-02e_oneclick_su_installer-improved.zip
Screenshots:
Feel free to ask questions.
Click to expand...
Click to collapse
anaschillin said:
I may not be able to help any further. I have boot looped my phone. I cannot get it past the NTT Docomo screen. I think I know what is causing it but I cannot get the phone connected to the PC. I may need to send it into Fujitsu.
Click to expand...
Click to collapse
i hope they can fix it immedietly, only you have work for this device (i hope any other)
question:
anyone have a stock rom for this device? may show me that's link?
Click to expand...
Click to collapse
Hi I am in the same situation, uninstall many applications in Japanese that I have the phone now in its box sirbe not all, send email to the seller took days with him and a solution is supposedly looking for me if I were to fix it passeth forums or sbrire a new post with the solution that would not be other than the original rom flaseo greetings
GattacaWroclaw said:
Hi I am in the same situation, uninstall many applications in Japanese that I have the phone now in its box sirbe not all, send email to the seller took days with him and a solution is supposedly looking for me if I were to fix it passeth forums or sbrire a new post with the solution that would not be other than the original rom flaseo greetings
Click to expand...
Click to collapse
You can reset the factory settings. Reboot the phone and hold the volume up, the phone will boot into recovery mode. You will be able to do a factory recovery.
armei said:
Thank! i just got the F-02e today. will try to root it.
btw, have you overcome a heating and self-shutting off prob on this phone?
Click to expand...
Click to collapse
I have not been able to overcome the issue. It is a design issue. Because it is waterproof phone the heat cannot disperse.
The only thing I have been able to do is keep the CPU frequency down to lower the time it takes for the phone to heat up.
garynsa said:
I tried the following OP method didnt work for me
Click to expand...
Click to collapse
What does it, when you run the root file?
Could you also tell your build number. Is it VR17xxx or VR16xxx?
[Tut]How To Systemless Root+Root+More!
This was fully tested on SM-G928A;Baseband:UCU2AOJ1 on 5.1.1
Just in case needed //SM-G928A\\ **Full Odin Restore G928AATT2AOJ1**
$<Download Mode & Odin Systemless Root Flash>
Requirements:
1.A Windows Computer
2.Your Phone Device SM-G92-0/5/8A
3.Odin 3.10.7
4.Kernel_Root_Android_5.1.1_AT&T_SamFirm.NET
5.USB Drivers(Most of the time if connect the phone to the computer using the usb cord that comes with the device it will install all of the drivers if your computer is connected to the internet.
____________________
Okay now assuming that everything has been required, we can begin.
Turn off your phone and open Odin with admin rights on the computer & connect your phone to the computer using the usb cable that comes with the phone.
On the phone now hold all of these following buttons down, Volume Down+Home Key+Power Soon after once you see the blue screen release those buttons and press the Volume Up key to enter Downloading Mode.
Now in Odin on the computer, it should have recognized your device now press the "AP" button and open up for example, "G928A_Kernel_Root_5.1.1_SamFirm.NET.tar.MD5" now just press start and sit back and relax and soon you will have Systemless Root!(Note your phone will reboot which is normal after the flash.
--------------------
#<Obtaining Root Access>
Requirements:
1.A Windows Computer
2.Your Phone Device SM-G92-0/5/8A
3.USB Drivers(Most of the time if connect the phone to the computer using the usb cord that comes with the device it will install all of the drivers if your computer is connected to the internet.
4.Flashed The Systemless Root
5.Kingo Root
6.Root Checker Cost $FREE
7.SuperSU Cost $FREE
8.BusyBox Cost $FREE
9.Developer Options (USB Debug)
____________________
Okay now assuming that everything has been required, we can begin.
Go into Settings>System>About Device & Enable Developer Options.(Keep tapping the "Build Number" category until it says Developer options have been enabled.
Connect your device with your usb that which comes with the phone on the computer. Open "Kingo ROOT" on your computer with admin rights, and once the program asks you to turn USB Debug on, go on your phone into Settings>System>Developer options and make sure it is enabled as well as usb debugging. Wait for kingo root to find your device and once found, it will ask you to either "Reroot,Root, or Remove Root, click "Reroot" then wait for it to start.(After it starts you should see on your phone the kingo root usb app pop-up and show the same thing you see on your computer)
After it is done it should confirm you have been rooted and will ask to donate.
Now you may exit out of the program on the computer and the phone and once out of the app and back on your phone, you will want to look in your app drawer for the kingo root "Superuser" and uninstall this. Then head on over to the playstore if haven't all ready and install "SuperSU" & "Busybox" if want to. Once have the SuperSU app open it and install the su binary updates with the "Normal" option not the recovery one since we don't have that.... & once done just press OK DO NOT REBOOT or you will bootloop and will have to use Odin to reflash your system of your phone to get it back working out of the box "state"
UPDATE Have a pc around and can still boot with root:
Yamaha169 said:
You can restart the device while rooted... but you have to have ADB to do so...
When you reboot ... you will get stuck at the ATT logo... at this point... plug your phone in to your pc...
Open up ADB (COMMAND WINDOW)
type in
ADB devices
until your device # appears in adb... (this can take a minute for your pc to find your phone) so don't panic
This means the phone is found...
From this point... type
ADB ROOT
ADB SHELL
YOU will now be inside the shell of the device with root permissions
Now type
setenforce 0
(MAKE SURE LOWERCASE just like seen. "setenforce 0" if do Setenforce 0 it won't be found.....)
This will set selinux to permissive ... allowing the phone to boot...
Someone with enough experience could probably create a selinux permissive stock kernel ... but I've contacted several developers with no response ...
Click to expand...
Click to collapse
Now open up the root checker app & click verify to see if you truly do have root.(You must grant root access so allow once it pops up.) Enjoy your root but never ever reboot.
UPDATE: How to Root If Possibly not allowing you to root!!!
Step one you will need to of downloaded "Android Studio
Step two you will now need to install all of the updates(Well that's what I did) inside the studio program.
Step three now locate 'program tools" which for me was located here: C:\Users\NameofComputer\AppData\Local\Android\android-sdk\platform-tools
Step four make a cmd.exe file to go in the platform-tools simply just clicking on the "start button" on windows and searching "cmd" then dragging the cmd file to the folder.(Rename it to something like ADB Root or something different than just cmd)
Step FIVE download the su binary which can be located HERE and place it in the "platform-tools" folder.
Step SIX now almost there. Open the cmd file(ADB Root.exe) and once opened, plug the phone into the computer with the cable that came with your phone.
Step Seven:^.^ now with the phone plugged in and the program start, type this command to make sure your device is found:
Code:
adb devices
and if found you will see your attached devices and if more than one or can't see your device, you can do
Code:
adb kill-server
command and it will restart adb.
Step Eight: MAGIC time lol now that your phone is connected and you can see it is indeed listed, type these commands as followed:
Code:
adb root
adb remount
adb push su /system/bin/su
adb shell
chown 0:0 /system/bin/su
chmod 6755 /system/bin/su
You don't really have to do the other commands after pushing su it's just for pre-caution.
Step Nine: Now do the following at the top and try to use the Kingo root once more and click root or reroot.
If this doesn't work try to press unroot and restart phone then try this again.
Also like down below I talk about if you did reboot before you unrooted, you can still unroot but sometimes it's tricky and it needs you to do the adb remount before will work so just remember that...
--------------------
$#$<UnRooting & Keeping Systemless Root So You Can Reboot & Reroot>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights)
3.SuperSU Cost $FREE
4.Root Checker Cost $FREE
____________________
This is very simple and easy to do, all you must do after every root and before every reboot is to go into "SuperSU" and go into the settings and scroll down until you see "Fully Unroot" and click that and once done verify with the root checker that you are indeed unrooted but still have adb shell and once done that you may freely reboot with no bootloop and then if want root once more just use "Kingo Root" on the computer to reroot once more.(I'm hoping someone will come out with an app that does the same thing and works so we don't need the computer anymore which would make it much easier..)
Edit/Update:
I found that if you maybe forgot to unroot before a reboot that you can still unroot without the need of going into odin and reflashing stock system just by connecting your phone to the computer via the usb that which comes with your phone and opening up Kingo Root and waiting for it to find your phone then click unroot and wait for it after you have unrooted and you will hear a sound which means it's fixed! So just force shutdown the device with pressing both: Volume Down+Home Button+Power then it will boot back up as normal!
-------------------- ____________________ -------------------- ____________________
~My Findings Through Long Research & Errors~:
<How to Fix Wifi Bug That Comes With Flashing Systemless Root>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights)
3.SuperSU Cost $FREE
4.BuildProp Editor Cost $FREE
____________________
On your phone open up the "BuildProp Editor".
click on the search button and search for "ro.securestorage.support=true" now once found change the =true to =false and save. Now you must reboot for it to take place but remember to UNROOT before you reboot.
Now doing this your wifi will stay connected and you no longer have to enter your password millions of times so it will be nicer to keep systemless root.
--------------------
<How to Enable AT&T Hotspot System FULLYApp>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Root Explorer Cost $3.99
4.NEW Modded TetheringProvision .apk Cost $FREE(Also can be found in this thread in attachments.
5.ADB Root cmd knowledge or Download SQLite Editor Cost $2.99
6.BuildProp Editor Cost $FREE
____________________
Okay my fellow members that stayed on 5.1.1 with me, this tut did once work but then at&t blocked me and it stopped working but now rejoice becase there is a bypass once more!!!
NEW WAY:
I'm not sure which worked so I'm gonna just tell you everything that I did...
1.I first rooted obviously
2.I found a new TetheringProvision.apk which I have uploaded down in the attachment and at the top.
3.I used adb root for this but this can also be done with sqlite editior so I'll explain both ways, first way will be the easy way the adb root...>>>
Step 1: Ensure you have the correct OEM drivers installed for your handset on the computer
Step 2: Download and install the necessary ADB drivers (v1.4.2)
Step 3: Enable USB debugging on your Android handset:
Go to Settings > About Device, and tap the build number 7 times or until you see 'You're now a developer' message.
Return to Settings > Developer options and use the toggle button to turn on USB debugging. Then tap OK button to accept the warning and continue.
Step 4:Connect your device to PC with original USB cable.
Step 5: Launch a command window on your Windows PC.
Step 6: Access ADB shell and run the following command:
adb shell now just type " settings put global tether_dun_required 0 " and enter.
________----------Now the sqlite way
Step 1:Go into sqlite editor and allow root rights...
Step 2: Locate "Settings Storage" and click on "Settings.db then click on "global"
Step 3:Locate tether_dun_required 0 and if not there add by clicking on the +
then fill out name as " tether_dun_required " >>And value as " 0 " and then save file and unroot then reboot.
Now then after all of that I downloaded the build.prop which I know you don't have to but it makes it easier for me to do so and probably for you too...
Step 1:Get build.prop editor from the playstore and open it to grant root rights.
Step 2:Click on the pencil icon on the top right where the search icon is.
Step 3: Scroll all the way down to an open line.(If not one make one.)
and put this in the line....>>> " net.tethering.noprovisioning=true " and then click the save button at the top right and then save it and unroot then reboot.
Then replacing the Tetherprovision.apk . >>>
Step 1: Download the NEW modded TetherProvision.apk at top or at bottom.
Step 2: get a root explorer and go to System/App/TetheringProvision
Step 3: Rename the actual TetheringProvision.apk to TetheringProvision.apk.bak
Step 4: in the same location, go into "arm64" and rename the TetheringProvision.odex to TetheringProvision.odex.bak
Step 5: Now locate the modded TetheringProvision.apk you've just downloaded and place it in System/App/TetheringProvision/ now should be two TetheringProvision, the TetheringProvision.apk.bak and the modded one, TetheringProvision.apk.
Step 6: change the property promissions of the tetheringprovision.apk to give it root rights by changing the promissions to look just like the actual one which is " rw-r--r-- "
Step 7: save and unroot then reboot!
Now youre wifi tether and usb should work!!! enjoy!
--------------------
<How to disable OTA & Security Notification>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Titanium Backup & Titanium Backup Pro License Cost $Free | $5.99
____________________
Open up titanium back with pro license and freeze these following apps:
1.SecurityLogAgent(This is that annoying notification that which comes with the systemless flash root that keeps annoying you to reboot and undo what you done.)
AT&T Software Update(This will make it so AT&T won't push any updates to your device anymore so no need to worry about installing an update ota and losing your root or something else like bootlooping.
And again, all of this sticks after you unroot and reboot!
___________________________________________
<How to Get Youtube RED (Sort of) FREE!>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.OGYoutube Cost $Free
Basically all you do here is download the modded sort of youtube app(OGYoutube) and install it then done! You now can download videos/music on the app and have access to run audio in the background plus NO ADS!!! (if there are I haven't seen any yet...)
Best part of this too since can't be used fttb, no need for XPOSED apk!
_____________________________
<How To Install Viper4android>
Requirements:
1.Your Phone Device SM-G92-0/5/8A
2.Root Access(Superuser rights & .SuperSU Cost $FREE)
3.Fast Reboot
4.Soft Reboot
5.Viper4Android V2.3.4.0
6.Audio_Effect.Config
7.Titanium Backup & Titanium Backup Pro License Cost $Free | $5.99
8.IRS Impulse Response Sample files
9.Root Explorer Cost $3.99
~~~~~~~~~~~~~
To Read the tuts yourself than rather follow my tut, you may do so by following This Link & This Link
~~~~~~~~~~~~~~~~~~
Alright, I decided to do my own detail tut to make it much easier so follow me and you'll have viper4android in no time : )
So let's get begin, download if not already, the busybox,SuperSU,TitaniumBackup,Fast reboot,Soft Reboot, & Root explorer. Now having all that done open up Busybox and allow it root rights and you may wait for it to research for a smart intall, or just press install. Once you installed it in the default location System/xbin, click on the will be installed to location and choose System/bin and install it there too.(Not sure why but that's what the tut called for.)
Now let's download the folders for viper4android, go ahead and download Audio_Effect.Config.zip file,IRS Impulse Response Sample files, & the Viper4Android V2.3.4.0 folder.
Now open up the root explorer and unzip all that which is zipped up.(Which is all of the files;Audio_Effect.Config.zip file,IRS Impulse Response Sample files.zip, & the Viper4Android V2.3.4.0 folder.zip
)
Now once all are extracted, we will begin putting what is needed where.
Let's start off with the ViPER4Android_FX_A4.x (The actual name of the folder) you're gonna want to long press it and copy this folder. Once done, you're gonna want to paste this folder in System>Priv-app and make sure to change the permission of the .apk to 0644 rw-r--r-- & the FOLDER to 0755 rwxr-xr-x(The folder should have the same permissions as the other folders in that location.) which is inside the folder to give it root access which is 0644;rw-r--r-- and if not sure what root permission should look like, refer to this link Or Google what it looks like, then save/press ok.
Now go back to where you extracted your folders, and this time copy the "audio_effects.conf and go to System>etc and find and rename the actual audio_effects.conf to audio_effects.conf.bak and then paste the copied modded audio_effects.conf here & DONT FORGET change the permissions to give it root rights.
Now after all is done, open the app "Titanium Backup Pro" and look for and freeze these following applications: 1.Adapt Sound 4.0 & SoundAlive 3.0 now open the app "Soft Reboot (Root) and click yes you want to do a soft reboot. Then once back up(If want you can click the "Fast reboot app" to quickly refresh the system) and running you should see the viper app inside your app drawer. Open it and install the update/software when ask you to and once done it should ask for you to reboot just click on ok and then go out and back to the "Soft Reboot (Root) then do another soft reboot.
Now almost DONE!!! Once back up and running again, go to your root explorer again where you extracted the folders and grab the folder of "ViPER4Android and move it to your device storage ex; Storage/emulated/0 (It's where the download folder is and dcim folder is.. Then finally, go toSettings>Device>Sounds and notifications>Sound quality and effects and toggle on all of the listings[NOTE YOU MUST PUT EARPHONES IN FOR THESE TOGGLES TO SHOW]; UHQ Upscaler|SoundAlive+|Tube Amp Pro now you're done enjoy viper4android via editing the settings in the app.
Edit
You need to download SELinux Mode Changer and give root rights and just click on permissive mode and all done. Also might need to use compatible mode in the Viper4Android settings.
I found that this mod works with Pandora and Youtube app but not with google music or the default music app and not sure how to fix that....
__________________________________0
This is some more quick finds which you don't need a tut for just information I'd like to share so you all know.
I found out that you can use Titanium Backup Pro Cost $5.99 and freeze anything you want such as bloatware and that annoying notification that appears every time you reboot if have systemless root installed "SecurityLogAgent" and as long as you UNROOT before you reboot, it is safe and everything you froze stays frozen.
Now I haven't tried uninstalling any system apps so I wouldn't advise doing that unless you wanted to but I don't see the point except to free space up since you can just freeze anything and does the same thing except for freeing space....
I haven't been able to unlock the bootloader in my research and errors which probably never gonna happen anytime soon....
I also never found an app that could root the device yet without a computer....
And yeah that's it! I just was so happy to find out all of this and just had to share it with xda members which are on the same boat as me that has been wanting some "freedom" which now can have a piece of it. : )
If found these tuts to be helpful, feel free to hit thanks button and if want donate.
AngelRyu said:
Just gonna get right to it and be fast.
Odin Flash Kernel for systemless root.
obtain root
Download SuperSU
After rooted download some sort of buildprop editor and search for " ro.securestorage.support=true" Now change =true to =false. and save!
Now go into the superSU app and fully unroot then reboot and also keep adb shell root!
So you fix the wifi bug plus keep the adb shell so you can obtain root once more! Now we just need some app that can give root access with 1 click without needing a pc and this would work for me until we can actually reboot with root without it bootlooping anyways.... I still can't find a wifi tether app or a method that works for the at&t hotspot app though...
Click to expand...
Click to collapse
Question for clarification.
So current method for rooting g928a is this systemless root.
Question 1, will it brick my phone with this root if i reboot, because i read somewhere on here that the phone will just keep on rebooting.
You mention using superSU app to unroot to reboot. So basically I have to unroot with superSU whenever I want to reboot then reflash again to get root?
fuzmik said:
Question for clarification.
So current method for rooting g928a is this systemless root.
Question 1, will it brick my phone with this root if i reboot, because i read somewhere on here that the phone will just keep on rebooting.
You mention using superSU app to unroot to reboot. So basically I have to unroot with superSU whenever I want to reboot then reflash again to get root?
Click to expand...
Click to collapse
Yes you must unroot to remove the su binary so the system acts like nothing has happen. I use kingo root for windows and it works every time with root all you need to do is hit "root" or it may say "reroot" and works every time. I have been playing with this a lot trying to do things to get it to reboot with root but have failed so far.... I wish someone with more experience would approach this so we could have an app to use at least so we not have to use pc every time to reroot until we get the ability to keep root and reboot.
Kingo root can be found here : https://www.kingoapp.com/android-root.htm
and this works after flashing the kernel from odin. This was the only way I actually found to be able to get root was with this because manually pushing su just didn't work for me....
Thanks for being much clearer on the instructions and idoit proof. I was worried about the bootloop and I thought there was no exit strategy on this expensive phone until you mention reflash. With your extensive tinkering on this, did your knox security trip up?
If this is the only possible way, maybe the community could make some sort of app that if we have to shutdown or reboot the phone specifically for g928a, it will safely unroot it for us.
TASKER?!
Anyone know if this still works after taking the latest OTA a few days ago?
The problem is this isn't root. I restart my phone several times a day. There is no point especially if I can't get a custom OS. However, thanks for making the instructions clear. And for anyone who doesn't understand systemless root, it's temp root. When you reboot dmverity sees the false file structure and tries to rewrite and reverse the changes, effectively removing root. On the Note 5 AT&T for temp root you didn't have to unroot before reboot as it wouldn't boot loop, it would just remove root and let you continue on. So something in this version must be getting farther in breaking past dmverity if it's causing the OS to bootloop.
tonys.94 said:
The problem is this isn't root. I restart my phone several times a day. There is no point especially if I can't get a custom OS. However, thanks for making the instructions clear. And for anyone who doesn't understand systemless root, it's temp root. When you reboot dmverity sees the false file structure and tries to rewrite and reverse the changes, effectively removing root. On the Note 5 AT&T for temp root you didn't have to unroot before reboot as it wouldn't boot loop, it would just remove root and let you continue on. So something in this version must be getting farther in breaking past dmverity if it's causing the OS to bootloop.
Click to expand...
Click to collapse
I was wondering if maybe we could place SU somewhere else so we might could trick it to reboot with root but haven't done it yet and or maybe keep SU on the sdcard/storage and use the terminal on the phone to push su to xbin every reboot but just hoping maybe can get root working without making the stupid thing bootloop.... Like I said I been doing a lot of dumb stuff with my phone because I have been so disappointed in this phone with not having wifi tether at the most really but now that got that I'm much happier but I'm still on the research of keeping root and being able to reboot.
I won't be updating until something maybe for sure comes along with 6.0 I can wait because my galaxy s4 I had stayed on stock version forever because was able to do everything so was no need to update really.... Anyways yeah lol maybe someone greater or maybe my playing around will work. WE can only hope...
Oh yeah, to the other guy NO it did not trip knox doing any of the things I've done. which I wouldn't care if could unlock the bootloader lol...
Edit:
I've done all I can think of and didn't work to keep root on a reboot except it did keep root without bootloop with a soft reboot...
I found out to maybe later will add tut up top but for now I'd like to tell you or whoever, if you do bootloop due to not being able to access the su unroot in time, you can still connect your device with Kingo Root in that bootloop and can unroot to save you from having to reflash every time... Might have to reboot as soon as you hear the found from the unroot though.
Oh and on a factory reset everything sticks excepts what was frozen becomes unfrozen just fyi...
Yeah, that's all I can find so I'm done with it hope someone can help later on but I'm just happy with wifi tether so much : )
So what all can we do with this root
Thank you for your hard work. it's very much appreciated!!!
Will pay part of my bounty which is 50 dollars pay day!!
But, please reply. what all can we do with this root!?
O0Gjulian said:
So what all can we do with this root
Thank you for your hard work. it's very much appreciated!!!
Will pay part of my bounty which is 50 dollars pay day!!
But, please reply. what all can we do with this root!?
Click to expand...
Click to collapse
Hi, I didn't come up with anything but the fix for wifi bug and hotspot app.
I just made a very detail tut to help others, but thanks.
I would wait on the bounty to be paid to someone who can make it possible to keep root on and still be able to reboot.
So in theory with this method I can root, install a modified tetheringprovisions, unroot (as hotspot is the only feature I actually desire), and go about my business without worrying about bootlooping or knox being tripped? Feels too good to be true, but I want to believe.
Just a reminder that Android 6.0.1 is right around the corner. If you don't fully go back to stock before the upgrade it will not flash and could possibly wipe the data partition. Both the system and boot images need to be 100% stock.
antizombie said:
So in theory with this method I can root, install a modified tetheringprovisions, unroot (as hotspot is the only feature I actually desire), and go about my business without worrying about bootlooping or knox being tripped? Feels too good to be true, but I want to believe.
Click to expand...
Click to collapse
It's true, that's how my phone is rolling with frozen apps and the modded hotspot without root, but still the systemless root remains in the system but doesn't do anything with out a computer or applying the kingo root to true root it.
I haven't tested the adaway yet so idk if will work or not.... and I been wanting xpose to work to disable youtube ads but haven't tried that either. . I might root tonight and try out adway tho.
But yeah to your question you are 100% safe and will not change anything or trip anything; phone can reboot all it wants with no bootloops with the modded tether is what I'm trying to say lol .. .
Edit:
Yeah adaway works after unroot and reboot. . . But I decided not to use it because a lot of people us adfly and it wouldn't let me access the link so yeah.....
On another note I froze a lot of stuff and done a lot of things not sure which part caused it but it doesn't bother me because I don't use samsung pay but in the end I had to freeze samsung framework for samsung pay because it kept saying force closed but which again Idc about that app so no biggy to me : )
Was Samsung Pay crashing before you started freezing apps? I have yet to use Pay but I'd prefer to keep my options open if possible.
antizombie said:
Was Samsung Pay crashing before you started freezing apps? I have yet to use Pay but I'd prefer to keep my options open if possible.
Click to expand...
Click to collapse
Honestly, I'm not sure but it had to be either the freezing at&t update or securityagent because it seemed to happen after that... Or could be the hotspot mod but I didn't get any crashes until i froze those 2 apps so idk...
Package Disabler in play store freezes apps so what's the point?
Can you fully remove with TiBu and be safe unrooted?
---------- Post added at 03:55 PM ---------- Previous post was at 03:40 PM ----------
navalynt said:
Just a reminder that Android 6.0.1 is right around the corner. If you don't fully go back to stock before the upgrade it will not flash and could possibly wipe the data partition. Both the system and boot images need to be 100% stock.
Click to expand...
Click to collapse
Yeah and from what I've seen of the nightmares people have been having with their Note 5's on Marshmallow, I'm staying FAR away from it!
I can confirm this works. Sorta a pain to have to reroot but hey, It's progress. We may never have a custom ROM option or recovery, But this is the next big thing. If we can find a app that'll just reroot us. it's perfect. (somewhat) Just rooted a few minutes ago. Going to play around. More than likely I'll re flash stock and make a youtube video for anyone needing questions or wanting to see it be done.
And I lied.. So, My experience was weird. Lagging constantly and weird download issues with a fresh wipe.
I'm sadly gonna have to unroot and hope that a better method would come out.
):
O0Gjulian said:
I can confirm this works. Sorta a pain to have to reroot but hey, It's progress. We may never have a custom ROM option or recovery, But this is the next big thing. If we can find a app that'll just reroot us. it's perfect. (somewhat) Just rooted a few minutes ago. Going to play around. More than likely I'll re flash stock and make a youtube video for anyone needing questions or wanting to see it be done.
And I lied.. So, My experience was weird. Lagging constantly and weird download issues with a fresh wipe.
I'm sadly gonna have to unroot and hope that a better method would come out.
):
Click to expand...
Click to collapse
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Also @
joe3681 said:
Package Disabler in play store freezes apps so what's the point?
Can you fully remove with TiBu and be safe unrooted?
---------- Post added at 03:55 PM ---------- Previous post was at 03:40 PM ----------
Yeah and from what I've seen of the nightmares people have been having with their Note 5's on Marshmallow, I'm staying FAR away from it!
Click to expand...
Click to collapse
I can confirm freezing anything won't harm the system on a reboot after unrooting but not sure about removing the apps would be safe. I have however remove the youtube app and reinstalled it in play store and it didn't harm anything.
AngelRyu said:
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Thanks for helping me! I went ahead and flashed stock and followed your steps!
Working great now!
NOW, My next question... What difference would it make if I used package disabler pro VS TBU?
Wouldn't both of these apps freeze the processes? Or would it make a difference with root and SU access?
Click to expand...
Click to collapse
O0Gjulian said:
AngelRyu said:
I'm not sure why you would experience "lag" because I have no lag what so ever. Maybe try going to settings>system>developer options and change both transition animation scale and window animation scale to 0.5x
I've reflashed stock many of times due to to trying to find everything there is to find and I've had no "lag" but also you could download the soft reboot and fast reboot from market. Fast reboot frees up memory via closing and restarting certain apps, and soft reboot kills zygote and does a "hot reboot" without going through whole start up process .
Please reply I'm gonna try and help you : )
Thanks for helping me! I went ahead and flashed stock and followed your steps!
Working great now!
NOW, My next question... What difference would it make if I used package disabler pro VS TBU?
Wouldn't both of these apps freeze the processes? Or would it make a difference with root and SU access?
Click to expand...
Click to collapse
I'm not sure because I've never heard of that program, but I did buy it just now for about $1.89 and the activation keeps failing so I can't test it to see the difference but with titanium you can do everything not just freeze stuff but back up apps and their data and much more.
Titanium backup has been around for ages which is why I recommend it.
Click to expand...
Click to collapse
I use package Disabler. Works like TiBu without root. Only reason to root would be to fully remove apps but would it boot okay after?