I apologize if i am not as clear in this post as I need to be. My dad tried to root his note 2 sgh i371 using odin but said that once he did this, he was unable to access the internet outside of connecting to wifi, he could not get any cellular data. Because of this issue, he tried to then un-root his phone by flashing 4.1.2 stock rom. Unfortunately, the issue of not being able to get cellular data persists. In his frustration, my dad bought a note 3 and gave his note 2 to me saying that if I could fix it I could keep it. This is my first android and I would like to make it my primary phone if possible. what I would like to simply to reset the phone to factory default settings by flashing the latest stock rom for the phone. I have Odin, I was hoping that someone could tell me where I could get the latest stock rom and, if they believed that flashing it would fix the cellular data issue. I do not believe my dad made a backup at all. Thank you in advance.
GreatGrizzwald said:
I apologize if i am not as clear in this post as I need to be. My dad tried to root his note 2 sgh i371 using odin but said that once he did this, he was unable to access the internet outside of connecting to wifi, he could not get any cellular data. Because of this issue, he tried to then un-root his phone by flashing 4.1.2 stock rom. Unfortunately, the issue of not being able to get cellular data persists. In his frustration, my dad bought a note 3 and gave his note 2 to me saying that if I could fix it I could keep it. This is my first android and I would like to make it my primary phone if possible. what I would like to simply to reset the phone to factory default settings by flashing the latest stock rom for the phone. I have Odin, I was hoping that someone could tell me where I could get the latest stock rom and, if they believed that flashing it would fix the cellular data issue. I do not believe my dad made a backup at all. Thank you in advance.
Click to expand...
Click to collapse
Sammobile has all the stock firmwares for our phones, check there. Also check in about phone to see what it says, if it says Baseband unknown, then the EFS folder (and subsequently IMEI #, etc) have been corrupted. It's possible flashing the latest stock firmware will fix it (it includes a new modem and all), so try that first.
http://www.sammobile.com/
absinthesummer said:
Sammobile has all the stock firmwares for our phones, check there. Also check in about phone to see what it says, if it says Baseband unknown, then the EFS folder (and subsequently IMEI #, etc) have been corrupted. It's possible flashing the latest stock firmware will fix it (it includes a new modem and all), so try that first.
Thank you very much for the advice. I am downloading the firmware now. baseband version is showing i317ucama4. Right now the phone is not activated with AT&T, is there a way I could test if I will be able to get cellular data before going to AT&T and activating it?
Click to expand...
Click to collapse
Well you're baseband is good. Just get a little cheap prepaid sim card for testing purposes. The stock firmware should fix anything in the modem or system that could have been corrupted... So flash that and have a cheap at&t Sim handy for testing.
Just use your father's sim card. Either it connects to the GSM network or it doesn't.
absinthesummer said:
Well you're baseband is good. Just get a little cheap prepaid sim card for testing purposes. The stock firmware should fix anything in the modem or system that could have been corrupted... So flash that and have a cheap at&t Sim handy for testing.
Click to expand...
Click to collapse
I attempted to flash the stock rom via odin v. 307 but I get a failed message. The phone shows I have a custom binary download (12 counts), official Samsung binar but, my system status is custom and my knox warranty is void: 1. Then there is a red message stating "unsupported version" at the bottom. The date for the stock rom was Jan 2013 AT&T, US on the sammobile site. I can no longer boot into the phone's OS, I am stuck in download mode until I manually restart and then it displays a message that I need to connect to Kies recovery. Thank you for the help so far, Any chance I can salvage this phone still? I did try going into Kies, but it cannot connect with my phone for some reason?
1425
rangercaptain said:
Just use your father's sim card. Either it connects to the GSM network or it doesn't.
Click to expand...
Click to collapse
Unfortunately, I got the phone when I was visiting home, I currently live a few states away from him. It would definitely make things much simpler if I didn't right now though.
GreatGrizzwald said:
I attempted to flash the stock rom via odin v. 307 but I get a failed message. The phone shows I have a custom binary download (12 counts), official Samsung binar but, my system status is custom and my knox warranty is void: 1. Then there is a red message stating "unsupported version" at the bottom. The date for the stock rom was Jan 2013 AT&T, US on the sammobile site. I can no longer boot into the phone's OS, I am stuck in download mode until I manually restart and then it displays a message that I need to connect to Kies recovery. Thank you for the help so far, Any chance I can salvage this phone still? I did try going into Kies, but it cannot connect with my phone for some reason?
Click to expand...
Click to collapse
It sounds like the phone was updated previously to either 4.3 or 4.4.2, which have Knox and that pesky counter. Technically you can't directly downgrade, so be sure you're downloading firmware that is 4.3 or higher. I didn't realize sammobile only went to MA4 for US AT&T. (In a pinch you can use Canadian firmware, but we have other links for stock firmware). Also, don't worry too much about Kies. It can be helpful, but honestly I could never get my note 2 recognized by kies either.
When I get back from taking my kids to school, I'll gather some links that will help you revive this phone Links below:
@GreatGrizzwald:
More recent links to stock firmware: STOCK PACKAGES TO MK6 This is LJ2 (4.1.2), MK6 (4.3) and up. He's got all the stock firmwares, available for flashing either in recovery on via odin. I've highlighted the one I would use in the attached screenshot (MK6- ODIN)
He also has a thread for NE5 (The latest firmware, 4.4.2) HERE
So if MK6 doesn't work, try NE5. One of those two has to work. You're dad already updated to either 4.3 or 4.4.2, I don't know which so start with 4.3 (MK6) and if it doesn't work try 4.4.2 (NE5)
On those two threads, he has a TON of links that will be helpful to you in getting back to stock also.
And here's a reference page with some useful links: One Stop Shop
This one is dedicated to downgrading back to LJ2 (4.1.2) from 4.3+, it MIGHT come in handy for you: Downgrade Instructions
If you have trouble with the stock firmware, you can also try Chainfire's CF Auto Root. It's stock firmware but it's rooted. Try the other firmwares by Zen Arcade first though CF AUTO ROOT
We'll get it going for you The stock firmware will re-flash the modem and all the configuration files so you're data should work again. Then you can do whatever you want, root, recovery, flash other stuff, or leave it stock. You got this
---------- Post added at 07:51 AM ---------- Previous post was at 07:09 AM ----------
GreatGrizzwald said:
Unfortunately, I got the phone when I was visiting home, I currently live a few states away from him. It would definitely make things much simpler if I didn't right now though.
Click to expand...
Click to collapse
Also you have to figure out if it's software or hardware. I'm inclined to believe it's software so I think if you get it back to stock you'll be good. If it was hardware, it wouldn't even recognize a sim being inserted (recently repaired an htc one mini with this problem, it needed a new Sim tray, thankfully it was only $20).
But it sounds more like a bad flash corrupted some of those important files and configurations controlling data connections, it's all good, if it's software it can definitely be fixed. If it were hardware it could still be fixed it would just be a bit more time consuming.
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
absinthesummer said:
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
Click to expand...
Click to collapse
Thank you for all this, I will start working with it today. You have been a huge help.
GreatGrizzwald said:
Thank you for all this, I will start working with it today. You have been a huge help.
Click to expand...
Click to collapse
No problem, I know how much of a pain it can be when things just don't seem to be working. But you have all the resources you need now and I'm gonna talk to my friend who runs the one-stop shop page to see if he will update it and add some of these resources to make it easier for you, and others with similar problems, to find what they need. Good luck!
1100
absinthesummer said:
One more thing, after you flash the stock firmware, and you have a sim card to test with, make sure your apn settings are correct for whichever carrier you're using. If the apn is wrong, or there is no apn listed, it won't connect. If you need assistance with that, let me know.
Click to expand...
Click to collapse
Hey, I was able to flash the stock rom you recommended, everything is working fine. Took the phone to AT&T and got a new sim card, everything seems to be working perfectly. Thank you again for all your assistance. could not have done this without your help.
GreatGrizzwald said:
Hey, I was able to flash the stock rom you recommended, everything is working fine. Took the phone to AT&T and got a new sim card, everything seems to be working perfectly. Thank you again for all your assistance. could not have done this without your help.
Click to expand...
Click to collapse
That is great news! I'm so glad it's working for you. Enjoy your (new-to-you) note 2 and keep those files on hand in case you need them in the future!
absinthesummer said:
No problem, I know how much of a pain it can be when things just don't seem to be working. But you have all the resources you need now and I'm gonna talk to my friend who runs the one-stop shop page to see if he will update it and add some of these resources to make it easier for you, and others with similar problems, to find what they need. Good luck!
Click to expand...
Click to collapse
If I can ask one more question, the phone keeps trying to download and install a software update however, it is unable to complete the update. Could this be because my counter was tripped? or could I be missing something that I should have flashed along with the stock firmware?
GreatGrizzwald said:
If I can ask one more question, the phone keeps trying to download and install a software update however, it is unable to complete the update. Could this be because my counter was tripped? or could I be missing something that I should have flashed along with the stock firmware?
Click to expand...
Click to collapse
There are a few reasons it won't flash. If it still says custom in download mode, for instance, from when your dad tried to root it. You can check in your about phone section to see if it says modified or official. It should say official there but when you're in download mode it will tell you your status:custom.
Something like
Model : SGH-i317
Binary count:
Firmware: Samsung official
Status: Custom (it should say official to receive OTA)
Knox warranty bit: 0x1 (from where your dad tried to root)
^Either of those last two can prevent an OTA from completing. The update checks for certain things and then continues or rejects based on those checks.
Also (and this shouldn't apply to you) if you have a custom recovery installed or you've rooted and removed pre-installed apps, it won't flash. Check those things and your OTA should work. If it still doesn't, you can download the ne5 firmware I linked you to before. That's official 4.4.2 firmware and it will update you to the latest via Odin if you can't take the OTA for whatever reason.
The firmware you flashed should have taken everything back to stock for you, but it wouldn't really reset the Knox counter & custom status... and that very well could would an OTA. It seems it does anyway, so just update yourself with Odin.
Lastly, if you really want to reset completely, and be able to OTA, you can do that downgrade method I linked before to completely reset your phone and allow you receive OTAs again. (It would take you ALL the way back to 4.1.2 and you would OTA back to 4.3-4.4.2. Personally, I wouldn't do all that unless I planned to sell it, because the firmwares that are released for OTAs are usually available on here to flash with Odin within a day of release, so you'll always be able to have the latest firmware regardless.
Hope that helps you didn't miss anything, it's just the nature of the OTA.
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
Edited to add, you can also go about it another way: root it and use triangle away to reset your custom status & flash counter and then reflash the same firmware you did yesterday. Then you should be able to OTA. (Although I'm not 100% on whether or not the Knox counter will interfere with the OTA update, I think it's just the flash counter that trips it).
And if you want the OTA notice to stop completely, you can root it and turn off the notifications entirely. I wasn't sure on whether you wanted to take the update or not... if you do, I'd just update with the latest via Odin. It's the simplest way to update and you wouldn't have any issues or surprises that people tend to get with OTAs.
absinthesummer said:
There are a few reasons it won't flash. If it still says custom in download mode, for instance, from when your dad tried to root it. You can check in your about phone section to see if it says modified or official. It should say official there but when you're in download mode it will tell you your status:custom.
Something like
Model : SGH-i317
Binary count:
Firmware: Samsung official
Status: Custom (it should say official to receive OTA)
Knox warranty bit: 0x1 (from where your dad tried to root)
^Either of those last two can prevent an OTA from completing. The update checks for certain things and then continues or rejects based on those checks.
Also (and this shouldn't apply to you) if you have a custom recovery installed or you've rooted and removed pre-installed apps, it won't flash. Check those things and your OTA should work. If it still doesn't, you can download the ne5 firmware I linked you to before. That's official 4.4.2 firmware and it will update you to the latest via Odin if you can't take the OTA for whatever reason.
The firmware you flashed should have taken everything back to stock for you, but it wouldn't really reset the Knox counter & custom status... and that very well could would an OTA. It seems it does anyway, so just update yourself with Odin.
Lastly, if you really want to reset completely, and be able to OTA, you can do that downgrade method I linked before to completely reset your phone and allow you receive OTAs again. (It would take you ALL the way back to 4.1.2 and you would OTA back to 4.3-4.4.2. Personally, I wouldn't do all that unless I planned to sell it, because the firmwares that are released for OTAs are usually available on here to flash with Odin within a day of release, so you'll always be able to have the latest firmware regardless.
Hope that helps you didn't miss anything, it's just the nature of the OTA.
---------- Post added at 09:08 PM ---------- Previous post was at 09:02 PM ----------
Edited to add, you can also go about it another way: root it and use triangle away to reset your custom status & flash counter and then reflash the same firmware you did yesterday. Then you should be able to OTA. (Although I'm not 100% on whether or not the Knox counter will interfere with the OTA update, I think it's just the flash counter that trips it).
And if you want the OTA notice to stop completely, you can root it and turn off the notifications entirely. I wasn't sure on whether you wanted to take the update or not... if you do, I'd just update with the latest via Odin. It's the simplest way to update and you wouldn't have any issues or surprises that people tend to get with OTAs.
Click to expand...
Click to collapse
Awesome, that makes a lot more sense now. Thanks again.
Hey I forgot you don't have custom recovery. Anyway, I sent you PMs,and you can do a search of this very forum- use the search term "update" or "ota" and you will find a LOT of threads on boot failures after OTA. Most people got their phones back.
If you can't get into DL mode (Vol-, Home, Power), try getting into the stock recovery (Vol+, Home, Power) because you should/could be able to factory reset the device from there. Also hold the button combo longer than usual. If one recovery option (DL mode) isn't working, than theoretically the other should still be accessible, through which you can adb sideload to the device or try factory reset. I know it's frustrating, but you're not the first nor the last to have an OTA go wrong ;/ We'll get ya back up & running.
You're not the only one in trouble after that update: http://forum.xda-developers.com/galaxy-note-2-att/help/todays-update-soft-bricked-phone-t2939649
Its been awhile since I've done my firmware, but I'm giving my phone over to my sister soon and upgrading to a Note Edge.
I'm trying to get this phone on Likewise S5, but having a little difficulties with the older guilds to install various stuff, also all the warning on the Likewise S5 don't show up in the guide I was following for the actual installation, like stuff about bootloaders and modems (I don't know what these are), I am a techy just I'm not well versed in Cellphone Firmware talk at all, more of a PC person.
This was the guide I'm following well can't link it, its on Team android, for the likewise S5 for S3 i747
I'm Trying to install CWM Because I believe I don't have one currently installed, if I do is there a way I can find out? all I believe I have is just a oem 4.1.2 firmware that was rooted.
Almost all the CWM guides that are out have their own downloads that no longer work for the CWM that they provide, and honestly I don't wanna mess with it anymore and want to get the proper combination, I've downloaded the latest one for Samsung Galaxy S3 from the Official Clockwork mod website for Touch version, but I'm not sure how to flash "that" I know it says to use PDA on 1.85 Odin which i've tried but it just says
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1) (No pass or fail)
I'm not sure what I'm doing at this point and could really use some help, specific to what I'm doing.
And to be specific I have a Samsung Galaxy S3 i747 From Rogers Wireless in Canada (Sept 2012), and it isn't bricked have booted it up just fine.
Currently I am dealing with a finnicky USB port as well, need to get some alchohol and see if I can get a more reliable connection out of it. I got it to point now I feel like I'm comfortable flashing it just eh, could be better, long as its sitting generally its connected slight pressure in cord to be sure, usually charges no problem but USB connectivity is whats finnicky. I cleaned out the lint with a needle didn't really seem to help a whole lot but definetly lets the plug go in further now, even bought a new cord that gets a decent click but it still a little floppy side to side, feels like its the plug has room to move inside the female end of the plug, vs anything being "loose"
Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.
jason2678 said:
Any chance your phone is already rooted? Odin flashing anything with a flaky USB port would make me a little nervous.
If you're rooted, there's an app called flashify that makes updating recovery pretty simple and there is no USB connection needed.
Also in the Play store if you search for Samsung Phone Info you should find an app that will tell you what firmware you're on. Install it and report back what it tells you you're on for bootloader and baseband and someone here should be able to chime in on whether it will run newer roms ok, or how to proceed if its out of date.
Click to expand...
Click to collapse
I am already rooted I know that I did the root myself, to get Super admin permissions for the Ps3 controller blutooth controller permissions.
I'll look into Flashify, I'll install phone info now
Ok here is from my Samsung phone info app;
DMF1 firmware is pretty out of date. Unless you pick an older build of a custom rom, you'll run into some issues.
The full Canadian carrier updates for i747m are all available for download from sammobile.com, but those will be really big files to flash with Odin. I wouldn't try that unless you're really confident in that USB port. This won't be a really quick flash and interrupting it could brick your phone.
The safest route might be to unroot the phone and take carrier OTAs until your firmware is up to date. You'll have to be on stock recovery for OTAs. Once you're unrooted if you power down and reboot your phone, I'm pretty sure the stock recovery will come back. If not, here's a link to a stock recovery: http://forum.xda-developers.com/showthread.php?t=2026751
To get going with rooting and custom roms again you'll have to flash a custom recovery in Odin once you get up to date on OTAs, but that will be a 5 - 10 MB file to flash as opposed to a 1 GB+ full system update. Don't worry about that until you get the bootloader and modem up to date, one step at a time. :good:
How do I perform an update though to manually update the phone, like to unroot it basically I'm Connecting it to USB getting it to recognize in Kies?
Like I have full USB access to my phone now, yes the port is flaky but it functions. Kies says my device is on latest firmware even though I know 4.4.2 was released by rogers for the device, i.e I don't understand how to unroot it and bring it up to date
I don't know what a OTA is, I don't understand what a modem/bootloader is etc.
I'm assuming what I have to do is update it to 4.4.2 via the normal firmware but currently it isn't giving me an option to
OTA is "over the air" updates. They are pushed to your phone and often update your phone's bootloader, modem, and rom to new versions. They'll download and install with wifi or cell data, no USB connection required. It is a very safe way to update your phone, but OTA updates will fail if you are rooted and have custom recovery (at least AT&T's will).
With android 4.1 and DMF1 firmware you're something like 2 or 3 updates out of date. Usually OTA notifications just pop up on their own, or you might have a "check for updates" option somewhere in your rom settings. Has this phone been off the grid for a while, update process frozen, or just declining OTAs for the last year and a half or so? Is it not tied to a carrier anymore?
I have updated bootloaders and modems outside of the OTA process, but only on the i747 AT&T variant. If OTA is not an option for some reason, I can't comment on what your safest route would be on the Canadian variant, but there are plenty of expert i747M users on here. Someone will chime in to help you out.
If OTA is an option, then the easiest way to unroot used to be to install SuperSU from the Play store, if you're not already using it. In SuperSU settings there used to be a "full unroot" option.
Ok So what do I need to do exactly I unrooted the phone no problem but it still doesn't recognize it as needing new firmware still so I'm still confused how to update it.
My understanding is I need to update this to latest base version which would be 4.4.2, but I'm not sure how to do that exactly since its not automatically doing it given the custom rom.
Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.
audit13 said:
Confirm the bootloader on your phone and post it here.
It is the bootloader that will determine which stock firmware to flash from sammobile.com onto your i747m.
Click to expand...
Click to collapse
Again, I'm not well versed in android terminology etc, I don't really know what a bootloader is, everything in those screen caps above is what I'm using
If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.
audit13 said:
If you want to be on the latest stock, just use Odin to flash the stock Rogers 4.1.1 ROM from sammobile.com. Then use OTA updates to update the phone to the latest KK.
Click to expand...
Click to collapse
Again, I Really Need more details Odin isn't so simple that its Oh Slot dis dat flash in der and poof completeo, if you read through the thread you'd you I have a flaky USB port that isn't 100% stable, flashing a 1gb rom through a iffy connection doesn't sound smart.
How do I flash this correctly from SD card if I can?
Please describe, Which App I need for it, what I need to do in app etc, cuz Odin is like AD AP DS WE aslaksd its all gibberish to me unforunately for different flashing locations
I know of no way to flash a completely stock ROM from an SD card.
If you wanted to flash it from an SD card, you would probably need to download the entire ROM, strip out the stock recovery, and re-pack the ROM into a zip file.
I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:
Evockzi said:
I'm still extremely confused, I need consise directions what I need to do, so far I haven't had solid details in this thread yet how to get my firmware installed :crying:
Click to expand...
Click to collapse
since youre computer literate , so to speak , perhaps this method would help/be more 'simple'. IDK , just a thought.
http://forum.xda-developers.com/showthread.php?t=2225405
"all i can really do , is stay out of my own way and let the will of heaven be done"
Is that method compatible with my device? before I've only been following ones that flash with odin.
The Reason why the isn't helpful immediately for me, I Do Not Know what I need to Do to achieve what I need.
Bootloader means almost nothing to me, I do Not know what I need to accomplish, No one has answered that question yet for me.
My Question is again, So, Do I need to install 4.4.2 Base as downloaded from that Samsmobile, and How Do I install Specifically that?
Beyond That my question expands into, Ok After I install that What do I need to do to install likewise.
I Do not know what I need to do so all these guides about doing specific tasks that you know what you need to do are useless to me at this moment I'm afraid.
I have enough of a stable USB connection I can Odin it Right now I just need to know what to select, etc
I yolo'd it with the connection, and flashed it with older odin 1.85 since I know PDA is the correct one idk what the hell it is in the new odin.
Passed, took almost 8 mintues to flash it, Now I just need to get back to original question of installing CWM Recovery and Getting Likewise S5 rom installed.
Do I have correct 4.3-4.4 Modem and boot loader that it spams in bright red on the likewise requirements?
Managed to finish all the installations without a hitch,
Followed a guide to CWM install and then root it through installing SuperSU, Then had everything to install Likewise which can be done on the device.
Everything installed perfect now I have a S5 to give to my sister cheers
@Evockzi glad you got it figured out.:victory:
"all i can really do , is stay out of my own way and let the will of heaven be done"